Search Results (13)

An imbalance in the body’s pH or temperature may modify the immune response and result in ailments such as autoimmune disorders, infectious diseases, cancer, or diabetes. Dual pH- and thermo-responsive carriers are being evaluated as advanced drug delivery microdevices designed to release pharmaceuticals in response to external or internal stimuli. A novel drug delivery system formulated as hydrogel was developed by combining a pH-sensitive polymer (the “biosensor”) with a thermosensitive polymer (the delivery component). Thus, the hydrogel was created by cross-linking, using a solvent-free thermal approach, of poly(N-isopropylacrylamide-co-N-hydroyethyl acrylamide), P(NIPAAm-co-HEAAm), and poly(methylvinylether-alt-maleic acid), P(MVE/MA). The chemical structure of the polymers and hydrogels was analyzed using Fourier-transform infrared (FTIR) and proton nuclear magnetic resonance (¹H NMR) spectroscopies. The pH/thermosensitive hydrogel loses its thermosensitivity under physiological conditions but, remarkably, can recover the thermosensitive capabilities when certain physiologically active biomolecules, acting as triggering agents, electrostatically interact with pH-sensitive units. Our research aimed to develop a drug delivery system that could identify the disturbance of normal physiological parameters and instantaneously send a signal to thermosensitive units, which would collapse and modulate the release profiles of the drug. Full article

Currently, polymer actuators capable of photothermal response are being developed to be more sensitive and repeatable. In this work, a three-layered structured soft film actuator (NA/PET/NI-3) was designed by combining poly(N-isopropylacrylamide) (PNIPAM), poly(N-(2-aminoethyl)-acrylamide) (PANGA) and poly(ethylene glycol-co-terephthalate) (PET) film. Coconut water and PEI were used to synthesize a new kind of carbon nanosheet (PEI-CCS), which, when triggered by near-infrared light, will enable photothermal bending behavior in the micrometer-scale NA/PET/NI-n film, while PET served as the supporting and heat conducting layer. This three-layered actuator utilized the synergistic effects of two kind of polymers, PNIPAM and PNAGA, on either side of PET, with the upper critical solution temperatures and lower critical solution temperatures when subjected to temperature changes. This bilateral polymer design exhibited a rapid response under near-infrared light stimulation, bending to 180° within 4 s and recovering to its original shape within 30 s. When the bending process was set to 90° as in the standard experiment, NA/PET/NI-3 responded within 2 s and recovered within 8 s. NA/PET/NI-3 also demonstrated good reversibility and repeatability, capable of undergoing reversible driving over 120 times. The design and preparation of this actuator provided new ideas for the development of polymer soft actuators. Full article

Effective treatment of postoperative pain lasting for multiple days without opioids is an important clinical need. We previously reported analgesia lasting up to 96 h in a porcine soft tissue model of postoperative pain using SBG004, an extended-release formulation of bupivacaine based on the temperature-responsive polymer poly(N-isopropylacrylamide-co-dimethylbutyrolactone acrylamide-co-Jeffamine M-1000 acrylamide) [PNDJ]. Orthopaedic surgical sites such as the knee can involve complex sensory innervation which presents a distinct challenge to local anesthetic delivery. The purpose of this work was to evaluate the pharmacokinetics and efficacy of SBG004 in an orthopaedic surgical model in comparison to currently available local anesthetics. Pharmacokinetics following periarticular (PA) or intraarticular (IA) injection of SBG004 were compared against liposomal bupivacaine (Lip-Bupi) PA in New Zealand White rabbits (all doses 14.5 mg/kg). Analgesic efficacy of SBG004 (IA, PA, or IA + PA), three active comparators, and saline was evaluated following knee surgery in New Zealand White rabbits. Analgesia was assessed via weight-bearing on the operated limb during spontaneous large steps in video recordings. Systemic bupivacaine exposure lasted at least 7 days for SBG004 PA, 4 days for SBG004 IA, and 2 days for Lip-Bupi PA. In the analgesia study, weight-bearing in all active groups except SBG004 IA was more frequent versus saline through 8 h postoperatively (p < 0.05). Only SBG004 IA + PA resulted in a higher proportion of weight-bearing rabbits at 24 h versus saline (6/7 versus 2/10, p = 0.015). Analysis of pooled data from 24–72 h showed significantly greater frequency of weight-bearing in rabbits receiving SBG004 IA + PA (71%) versus saline (37%), ropivacaine cocktail (41%), and Lip-Bupi PA (36%). The results indicate that the release profile from SBG004 PA or IA coincides reasonably with the time course of postoperative pain, and SBG004 may produce longer duration of analgesia than local anesthetics currently used in knee surgery, including during the period of 24–72 h recognized as a target for extended-release local anesthetics. Full article

Phase transition behaviors of poly(N-isopropylacrylamide) nanogels with different compositions induced by (−)-epigallocatechin-3-gallate (EGCG) and ethyl gallate (EG) has been investigated systematically. Monodisperse poly(N-isopropylacrylamide-co-N-hydroxymethyl acrylamide) (P(NIPAM-co-NMAM)) and poly(N-isopropylacrylamide-co-2-hydroxyethyl methacrylate) (P(NIPAM-co-HEMA)) nanogels with different feeding monomer ratios were prepared by emulsion polymerization. P(NIPAM-co-NMAM) nanogels exhibit rapid isothermal phase transition behavior in EGCG solutions with low concentration (10⁻³ mol/L) in less than 10 minutes. The thermosensitive phase transition behaviors of nanogels are affected not only by the copolymerized monomers but also by the concentrations of EGCG and EG in aqueous solutions. Nanogels remain in a shrunken state and do not exhibit thermosensitive phase transition behaviors in EGCG solutions (≥5 mmol/L), whereas they display thermo-responsive phase transition behaviors in EG solutions. The volume phase transition temperature (VPTT) shifts to lower temperatures with increasing EG concentration. The diameters of P(NIPAM-co-NMAM) nanogels decrease with increasing EG concentration at temperatures between 29 and 33 °C. In contrast, the diameters of P(NIPAM-co-HEMA) nanogels increase with increasing EGCG concentration at temperatures between 37 and 45 °C. The results demonstrate the potential of nanogels for simple detection of EG and EGCG concentrations in aqueous solutions over a wide temperature range, and EGCG can serve as a signal for the burst-release of drugs from the P(NIPAM-co-NMAM)-based carriers at physiological temperature. Full article

Bacterial adhesion and biofilm formation on the surface of titanium implants are the main causes of implant-associated infection. An antibacterial coating on the implant surface can reduce the risk of biofilm formation. The aim of this study was to investigate the bactericidal effects of a van-comycin-loaded polymer coated on an implant surface. For this purpose, poly(N-isopropylacrylamide) (PNIPAAm) was first synthesized as a homopolymer or by co-polymerization with acrylamide (PNIPAAm-AAm) at a 5% weight ratio. Then, thin and uniform polymer coatings were prepared using the spin coating technique. The degree of surface hydro-philicity of the polymer coatings was evaluated by measuring the water contact angle (CA). For the antibacterial tests, the polymer-coated surfaces were loaded with vancomycin. The tests were performed in three conditions: on a glass surface (control), on a PNIPAAm-AAm-coated surface, and on a PNIPAAm-AAm-coated surface loaded with vancomycin. The death rates of the bacteria in contact with the coated surfaces were evaluated at different temperatures with fluorescence microscopy. A scanning electron microscopy (SEM) analysis of cross sections of the polymer coatings revealed a uniform thin film of approximately 200 nm in thickness. The water contact angle analysis performed at different temperatures revealed that the polymer-coated surfaces were more hydrophobic (CAs ranging between 53° and 63°) than the uncoated glass surface (CA ranging between 15° and 35°). The bacterial death rate, measured at 40 °C or while continuously switching the temperature between 37 °C and 40 °C, was higher in the presence of the surface coated with vancomycin-loaded PNIPAAm-AAm than when using the other surfaces (p-value ≤ 0.001). The vancomycin-loaded polymer coating evaluated in this study exhibited effective antibacterial properties when the polymer reached the phase transition temperature. Full article

We prepared the self-healing and temperature/pH-responsive hydrogels using oxidized succinoglycan (OSG) and a poly (N-isopropyl acrylamide-co-acrylamide) [P(NIPAM-AM)] copolymer. OSG was synthesized by periodate oxidation of succinoglycan (SG) isolated directly from soil microorganisms, Sinorhizobium meliloti Rm1021. The OSG/P(NIPAM-AM) hydrogels were obtained by introducing OSG into P(NIPAM-AM) networks. The chemical structure and physical properties of these hydrogels were characterized by ATR-FTIR, XRD, TGA, and FE-SEM. The OSG/P(NIPAM-AM) hydrogels showed improved elasticity, increased thermal stability, new self-healing ability, and 4-fold enhanced tensile strength compared with the P(NIPAM-AM) hydrogels. Furthermore, the 5-FU-loaded OSG/P(NIPAM-AM) hydrogels exhibited effective temperature/pH-responsive drug release. Cytotoxicity experiments showed that the OSG/P(NIPAM-AM) hydrogels were non-toxic, suggesting that OSG/P(NIPAM-AM) hydrogels could have the potential for biomedical applications, such as stimuli-responsive drug delivery systems, wound healing, smart scaffolds, and tissue engineering. Full article

A TiO₂ nanoparticle-loaded polymer fiber web was developed as a functional material with the ability to adsorb and photo-catalytically degrade organic pollutants in aquatic media. A linear copolymer of N-isopropylacrylamide (primary component) and N-methylol acrylamide (poly(NIPA-co-NMA)) was prepared, and composite fibers were fabricated by electrospinning a methanol suspension containing the copolymer and commercially available TiO₂ nanoparticles. The crosslinking of the polymer via the formation of methylene bridges between NMA units was accomplished by heating, and the fiber morphology was analyzed by electron microscopy. 4-Isopropylphenol generated by the degradation of bisphenol A—one of the endocrine-disrupting chemicals—was used as the model organic pollutant. As poly(NIPA) is a thermosensitive polymer that undergoes hydrophilic/hydrophobic transition in water, the temperature-dependence of the adsorption and photocatalytic degradation of 4-isopropylphenol was investigated. The degradation rate was analyzed using a pseudo-first-order kinetic model to obtain the apparent reaction rate constant, k_app. The enhancement of the photocatalytic degradation rate owing to the adsorption of 4-isopropylphenol onto thermosensitive poly(NIPA)-based fibers is discussed in terms of the ratio of the k_app of the composite fiber to that of unsupported TiO₂ nanoparticles. Based on the results, an eco-friendly wastewater treatment process involving periodically alternated adsorption and photocatalytic degradation is proposed. Full article

Biomedical applications of thermo-responsive (TR) hydrogels require these materials to be biocompatible, non-cytotoxic, and non-immunogenic. Due to serious concerns regarding potential toxicity of poly(N-isopropylacrylamide) (PNIPAm), design of alternative homo- and copolymer gels with controllable swelling properties has recently become a hot topic. This study focuses on equilibrium swelling of five potential candidates to replace PNIPAm in biomedical and biotechnological applications: poly(N-vinylcaprolactam), poly(vinyl methyl ether), poly($N,N$-dimethyl amino ethyl methacrylate), and two families of poly(2-oxazoline)s, and poly(oligo(ethylene glycol) methacrylates). To evaluate their water uptake properties and to compare them with those of substituted acrylamide gels, a unified model is developed for equilibrium swelling of TR copolymer gels with various types of swelling diagrams. Depending on the strength of hydrophobic interactions (high, intermediate, and low), the (co)polymers under consideration are split into three groups that reveal different responses at and above the volume phase transition temperature. Full article

This work is focused on the design and development of biocompatible self-assembling hydrogels, which behave as soft gels at room temperature and strong gels at the physiological temperature, suitable for potential bio-applications. A graft copolymer of sodium-alginate, bearing eight side chains of poly(N-isopropylacrylamide), enriched with the hydrophobic comonomer N-tertiary-butyl-acrylamide (NtBAM), (NaALG-g-P(NIPAM-co-NtBAM)) were used as gelator. In total, 5 wt% aqueous polymer solutions in the presence of Ca²⁺ cations were prepared and evaluated as thermo-responsive hydrogels. Rheological experiments revealed a twostep reversible gelation either upon heating or cooling. The divalent cations operated as a cross-linking agent through ionic interactions, inducing the formation of a network at low temperatures. Upon heating, an additional crosslinking develops through thermo-induced hydrophobic association of the thermo-responsive P(NIPAM-co-NtBAM) side chains above a critical temperature. The combination of thermo- and shear-responsiveness provides shelf-assembling systems as potential candidates for injectable strategies. For instance, the system under investigation could be used for cell transplantation, which requires a weak gel to protect the cells during injection and a gel strengthening after the injection at a physiological temperature to immobilize the created scaffold in the targeting position of the host tissue. Full article

Small interfering RNAs (siRNAs) have been attracting significant attention owing to their gene silencing properties, which can be utilized to treat intractable diseases. In this study, two temperature-responsive liposomal siRNA carriers were prepared by modifying liposomes with different polymers—poly(N-isopropylacrylamide-co-N,N-dimethylaminopropyl acrylamide) (P(NIPAAm-co-DMAPAAm)) and poly(N-isopropylacrylamide-co-N,N-dimethylacrylamide) P(NIPAAm-co-DMAAm). The phase transition of P(NIPAAm-co-DMAPAAm) was sharper than that of P(NIPAAm-co-DMAAm), which is attributed to the lower co-monomer content. The temperature dependent fixed aqueous layer thickness (FALT) of the prepared liposomes indicated that modifying liposomes with P(NIPAAm-co-DMAPAAm) led to a significant change in the thickness of the fixed aqueous monolayer between 37 °C and 42 °C; while P(NIPAAm-co-DMAAm) modification led to FALT changes over a broader temperature range. The temperature-responsive liposomes exhibited cellular uptake at 42 °C, but were not taken up by cells at 37 °C. This is likely because the thermoresponsive hydrophilic/hydrophobic changes at the liposome surface induced temperature-responsive cellular uptake. Additionally, siRNA transfection of cells for the prevention of luciferase and vascular endothelial growth factor (VEGF) expression was modulated by external temperature changes. P(NIPAAm-co-DMAPAAm) modified liposomes in particular exhibited effective siRNA transfection properties with low cytotoxicity compared with P(NIPAAm-co-DMAAm) modified analogues. These results indicated that the prepared temperature-responsive liposomes could be used as effective siRNA carriers whose transfection properties can be modulated by temperature. Full article

The effect of monomer sequence along the network chain on the swelling behavior of polymer gels should be clarified for the advanced control of swelling properties of gel materials. To this end, we systematically investigated the swelling properties of poly(acrylamide derivative) gels with the same composition but different monomer sequence by utilizing two gel synthetic methods: copolymerization giving a random network and co-crosslinking giving a blocky network. Both of the copolymerization and the co-crosslinking gels were prepared from the combination of two of the three following monomers: hydrophilic N,N-dimethylacrylamide (DMAAm), hydrophobic N-n-butylacrylamide (NBAAm), and thermoresponsive N-isopropylacrylamide (NIPAAm) with various monomer compositions. The swelling measurement of the obtained gels showed totally different behaviors between the copolymerization and the co-crosslinking gels, even with the same monomer composition. The copolymerization gels had the average property from the two monomers, depending on monomer composition, because random monomer distribution changed the affinity of each network chain to water. On the other hand, the co-crosslinking gels behaved as if two components independently contributed to the swelling properties, probably due to the domain structure derived from two kinds of prepolymers. Full article

We tuned the lower critical solution temperature (LCST) of amphiphilic poly(N-isopropylacrylamide) (PNIPAAm) via copolymerization with a hydrophilic comonomer of N-hydroxymethyl acrylamide (NHMAAm). A series of copolymers P(NIPAAm-co-NHMAAm) were synthesized by atom transfer radical polymerization (ATRP) using CuBr/(N,N,N',N',N''-Pentamethyldiethylenetriamine) (PMDETA) as a catalyst system and 2-bromo ethyl isobutyrate (EBiB) as an initiator. The copolymers were well characterized by Fourier transform infrared spectroscopy (FT-IR), ¹H Nuclear magnetic resonance (NMR), and Thermogravimetric analysis (TGA). The copolymers followed a simple rule in their thermosensitive behaviors and have a linear increase in the LCST as a function of NHMAAm mol%. The thermosensitive properties of the copolymer films were investigated and demonstrated hydrophilic-hydrophobic transitions. Finally, the copolymer was grafted onto cotton fabrics using citric acid (CA) as a crosslinking agent and sodium hypophosphite (SHP) as a catalyst following a two dipping, two padding process. The large number of hydroxyl groups in the copolymer makes grafting convenient and firm. The grafted cotton fabrics show obvious thermosensitive behaviors. The results demonstrate that the cotton fabrics become more hydrophobic when the temperature is higher than the LCST. This study presents a valuable route towards temperature-responsive smart textiles and their potential applications. Full article

The synthesis of poly(N-isopropylacrylamide)-b-poly(L-lysine) and poly(N- isopropylacrylamide-co-acrylamide)-b-poly(L-lysine) copolymers was accomplished by combining atom transfer radical polymerization (ATRP) and ring opening polymerization (ROP). For this purpose, a di-functional initiator with protected amino group was successfully synthetized. The ATRP of N-isopropylacrylamide yielded narrowly dispersed polymers with consistent high yields (~80%). Lower yields (~50%) were observed when narrowly dispersed random copolymers of N-isopropylacrylamide and acrylamide where synthesized. Amino-terminated poly(N-isopropylacrylamide) and poly(N-isopropylacrylamide- co-acrylamide) were successfully used as macroinitiators for ROP of N₆-carbobenzoxy-L- lysine N-carboxyanhydride. The thermal behavior of the homopolymers and copolymers in aqueous solutions was studied by turbidimetry, dynamic light scattering (DLS) and proton nuclear magnetic resonance spectroscopy (¹H-NMR). Full article