Search Results (628)

In this study, a Z-scheme Ho₂InSbO₇/Ag₃PO₄ (HAO) heterojunction photocatalyst was successfully fabricated for the first time by ultrasound-assisted solvothermal method. The structural features, compositional components and morphological characteristics of the synthesized materials were thoroughly characterized by a series of techniques, including X-ray diffraction, Fourier transform infrared spectroscopy, Raman spectrum, X-ray photoelectron spectroscopy, transmission electron microscopy, scanning electron microscopy and energy-dispersive X-ray spectroscopy. A comprehensive array of analytical techniques, including ultraviolet-visible diffuse reflectance absorption spectra, photoluminescence spectroscopy, time-resolved photoluminescence spectroscopy, photocurrent testing, electrochemical impedance spectroscopy, electron paramagnetic resonance, and ultraviolet photoelectron spectroscopy, was employed to systematically investigate the optical, chemical, and photoelectronic properties of the materials. Using oxytetracycline (OTC), a representative tetracycline antibiotic, as the target substrate, the photocatalytic activity of the HAO composite was assessed under visible light irradiation. Comparative analyses demonstrated that the photocatalytic degradation capability of the HAO composite surpassed those of its individual components. Notably, during the degradation process, the application of the HAO composite resulted in an impressive removal efficiency of 99.89% for OTC within a span of 95 min, along with a total organic carbon mineralization rate of 98.35%. This outstanding photocatalytic performance could be ascribed to the efficient Z-scheme electron-hole separation system occurring between Ho₂InSbO₇ and Ag₃PO₄. Moreover, the adaptability and stability of the HAO heterojunction were thoroughly validated. Through experiments involving the capture of reactive species and electron paramagnetic resonance analysis, the active species generated by HAO were identified as hydroxyl radicals (•OH), superoxide anions (•O₂⁻), and holes (h⁺). This identification provides valuable insights into the mechanisms and pathways associated with the photodegradation of OTC. In conclusion, this research not only elucidates the potential of HAO as an efficient Z-scheme heterojunction photocatalyst but also marks a significant contribution to the advancement of sustainable remediation strategies for OTC contamination. Full article

Steel pickling sludge serves as a valuable iron source for synthesizing Fe-based catalysts in heterogeneous advanced oxidation processes (AOPs). Here, MoS₂@CoFe₂O₄ catalyst derived from steel pickling sludge was prepared via a facile solvothermal approach and utilized to activate peroxymonosulfate (PMS) for tetracycline hydrochloride (TCH) degradation. Comprehensive characterization using scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD) confirmed the supported microstructure, composition, and crystalline structure of the catalyst. Key operational parameters—including catalyst dosage, PMS concentration, and initial pH—were systematically optimized, achieving 81% degradation efficiency within 30 min. Quenching tests and EPR analysis revealed ∙SO₄^‒ as the primary oxidative species, while the catalyst maintained high stability and reusability across cycles. TCH degradation primarily occurs through hydroxylation, decarbonylation, ring-opening, and oxidation reactions. This study presents a cost-effective strategy for transforming steel pickling sludge into a high-performance Fe-based catalyst, demonstrating its potential for practical AOP applications. Full article

Photoelectrochemical devices have garnered extensive research attention in the field of smart and multifunctional photoelectronics, owing to their lightweight nature, eco-friendliness, and cost-effective manufacturing processes. In this work, Bi₂S₃/Bi₂O₃/TiO₂ heterojunction film was successfully fabricated and functioned as the photoelectrode of photoelectrochemical devices. The designed Bi₂S₃/Bi₂O₃/TiO₂ photoelectrochemical photodetector possesses a broad light detection spectrum ranging from 400 to 900 nm and impressive self-powered characteristics. At 0 V bias, the device exhibits an on/off current ratio of approximately 1.3 × 10⁶. It achieves a commendable detectivity of 5.7 × 10¹³ Jones as subjected to a 0.8 V bias potential, outperforming both bare TiO₂ and Bi₂O₃/TiO₂ photoelectrochemical devices. Moreover, the Bi₂S₃/Bi₂O₃/TiO₂ photoelectrode film shows great promise in pollutant decomposition, achieving nearly 97.7% degradation efficiency within 60 min. The appropriate band energy alignment and the presence of an internal electric field at the interface of the Bi₂S₃/Bi₂O₃/TiO₂ film serve as a potent driving force for the separation and transport of photogenerated carriers. These findings suggest that the Bi₂S₃/Bi₂O₃/TiO₂ heterojunction film could be a viable candidate as a photoelectrode material for the development of high-performance photoelectrochemical optoelectronic devices. Full article

Ultra-fine-grained bainitic (UFGB) steels offer excellent mechanical properties, which can be further improved by applying diamond-like carbon (DLC) coatings. However, poor adhesion between the coating and substrate remains a key limitation. Since the steel’s microstructure degrades at high temperatures, enhancing adhesion without heating the substrate is essential. This study investigates surface hardening combined with simultaneous nitrogen and hydrogen doping during the Radio Frequency Chemical Vapor Deposition (RFCVD) process to improve coating performance. Varying gas compositions were tested to assess their effects on coating properties. Nitrogen incorporation decreased hardness from 12 GPa to 9 GPa but improved adhesion, while hydrogen limited damage after coating failure. Optimizing the gas mixture led to enhanced adhesion and wear resistance. Raman and X-ray photoelectron spectroscopy (XPS) analyses confirmed that the optimized coatings had the highest sp³ bond content and elevated nitrogen levels. While both hardness and adhesion contributed to wear resistance, no direct link to coating thickness was found. Overall, co-doping with nitrogen and hydrogen is an effective approach to improve adhesion and wear resistance without requiring high processing temperatures or complex equipment. Full article

100 nm thick TiO₂/TiN bilayers with varying thickness ratios were deposited via reactive sputtering of a Ti target in controlled oxygen and nitrogen atmospheres. Post-deposition annealing in air at 600 °C was performed to induce nitrogen diffusion through the oxygen-deficient TiO₂ layer. The resulting changes in morphology and chemical environment were investigated in detail using transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and UV-Vis spectroscopy. Detailed TEM and XPS analyses have confirmed nitrogen diffusion across the TiO₂ layer, with surface nitrogen concentration and the ratio of interstitial to substitutional nitrogen dependent on the TiO₂/TiN mass ratio. Optical studies demonstrated modifications in optical constants and a reduction of the effective bandgap from 3.2 eV to 2.6 eV due to new energy states introduced by nitrogen doping. Changes in surface free energy induced by nitrogen incorporation showed a correlation to nitrogen doping sites on the surface, which had positive effects on overall photocatalytic activity. Photocatalytic activity, assessed through methylene blue degradation, showed enhancement attributed to nitrogen doping. Additionally, deposition of a 5 nm gold layer on the annealed sample enabled investigation of synergistic effects between nitrogen doping and gold incorporation, resulting in further improved photocatalytic performance. These findings establish the TiO₂/TiN bilayer as a versatile platform for supporting thin gold films with enhanced photocatalytic properties. Full article

The stability of yttria-stabilized zirconia (YSZ) as a dental implant material is highly dependent on its resistance to low-temperature degradation (LTD) and surface dissolution, particularly in acidic oral environments. This study investigates the effects of yttrium ion (Y³⁺) release on the phase stability of zirconia during constant immersion and pH cycling tests, simulating oral conditions. Zirconia disks were immersed in acidic (pH 2), neutral (pH 7), and basic (pH 10) solutions over a 27-day period. Inductively coupled plasma (ICP) analysis revealed significant yttrium ion release during acidic phases, while zirconium ion (Zr⁴⁺) release remained minimal. X-ray photoelectron spectroscopy (XPS) showed a shift in zirconium 3d binding energies, indicating a transformation from the tetragonal to the monoclinic phase, driven by yttrium leaching. X-ray diffraction (XRD) confirmed this phase change, with the appearance of the monoclinic (111) peak after exposure to acidic conditions. This study concludes that yttrium ion depletion under acidic conditions destabilizes the tetragonal phase, promoting LTD and compromising the material’s long-term performance as a dental implant or restorative material. Full article

Titanium dioxide (TiO₂) is a benchmark photocatalyst for environmental applications, but its limited visible-light activity due to a wide band gap and fast charge recombination restricts its practical efficiency. This study presents the development of heterostructured Ag (Au)/MoS₂-TiO₂ inverse opal (IO) films that synergistically integrate photonic, plasmonic, and semiconducting functionalities to overcome these limitations. The materials were synthesized via a one-step evaporation-induced co-assembly approach, embedding MoS₂ nanosheets and plasmonic nanoparticles (Ag or Au) within a nanocrystalline TiO₂ photonic framework. The inverse opal architecture enhances light harvesting through slow-photon effects, while MoS₂ and plasmonic nanoparticles improve visible-light absorption and charge separation. By tuning the template sphere size, the photonic band gap was aligned with the TiO₂-MoS₂ absorption edge and the localized surface plasmon resonance of Ag, enabling optimal spectral overlap. The corresponding Ag/MoS₂-TiO₂ photonic films exhibited superior photocatalytic and photoelectrocatalytic degradation of tetracycline under visible light. Ultraviolet photoelectron spectroscopy and Mott–Schottky analysis confirmed favorable band alignment and Fermi level shifts that facilitate interfacial charge transfer. These results highlight the potential of integrated photonic–plasmonic-semiconductor architectures for efficient solar-driven water treatment. Full article

In this study, AgI/Ag₃PO₄/WO₃ ternary composite photocatalysts with dual Z-scheme heterojunction were fabricated via the in situ loading of Ag₃PO₄ onto WO₃ followed by anion exchange. Compared to single photocatalysts and binary composites, the AgI/Ag₃PO₄/WO₃ composites exhibited enhanced photocatalytic activity in the photodegradation of chlortetracycline hydrochloride (CTC) under visible-light irradiation. Notably, the AAW-40 photocatalyst, which contained an AgI/Ag₃PO₄ molar ratio of 40%, degraded 75.7% of the CTC within 75 min. Moreover, AAW-40 demonstrated an excellent performance in the cyclic degradation of CTC over four cyclic degradation experiments. The separation and transfer kinetics of the AgI/Ag₃PO₄/WO₃ composite were investigated with photoluminescence spectroscopy, time-resolved photoluminescence spectroscopy, and electrochemical measurements. The improved photocatalytic performance was primarily due to the creation of a silver-bridged dual Z-scheme heterojunction, which facilitated the efficient separation of photoinduced electron–hole pairs, retained the strong reducing capability of electrons in AgI, and ensured the strongly oxidizing nature of the photoexcited holes in WO₃. The dual Z-scheme charge-transfer mechanism was further validated using in situ X-ray photoelectron spectroscopy. This study provides a foundation for developing innovative dual Z-scheme photocatalytic systems aimed at the efficient degradation of antibiotics in wastewater. Full article

Seawater electrolysis offers a sustainable route for large-scale, carbon-neutral hydrogen production, but its industrial application is limited by the poor efficiency and durability of current electrocatalysts under high current densities. Herein, we synthesized ultrasmall Pt nanoclusters uniformly anchored on FeCoNi phosphide nanosheet arrays, forming a composite catalyst with outstanding hydrogen evolution reaction (HER) performance in alkaline seawater. The catalyst achieves an ultralow overpotential of 17 mV at −10 mA cm⁻², far surpassing commercial Pt/C, and stably delivers industrial-level current densities up to 2000 A m⁻² for over 2400 h with minimal voltage degradation and low energy consumption (4.16 kWh/Nm³ H₂). X-ray photoelectron spectroscopy revealed strong interfacial electronic interactions between Pt and Fe/Co species, involving electron transfer from Pt that modulates its electronic structure, weakens hydrogen adsorption, and enhances both HER kinetics and Pt dispersion. This work presents a scalable and robust catalyst platform, bridging the gap between laboratory research and industrial seawater electrolysis for green hydrogen production. Full article

The hydrolysis oxidation of 1,2-chlorobenzene (1,2-DCB) over Pd-Ti-Ni/ZSM-5(25) catalysts has been investigated as a safe and environmentally friendly method for the removal of chlorinated aromatic organic compounds. Experimental results demonstrate that hydrolysis oxidation technology can effectively suppress the formation of polychlorinated organic compounds. Among the catalysts studied, the 0.5%Pd-2%Ti-8%Ni/ZSM-5(25) catalyst exhibited optimal hydrolysis oxidation performance, achieving complete conversion of 1,2-DCB at 425 °C. Notably, this technology significantly inhibits the formation of polychlorinated organic by-products during the catalytic degradation of 1,2-DCB. Although trace amounts of chlorobenzene were still detected, the overall reduction in hazardous by-products is remarkable. Characterization techniques, including X-Ray Diffraction (XRD), X-Ray Photoelectron Spectroscopy (XPS), Pyridine adsorption infrared Spectroscopy (pyridine IR) and Fourier transform infrared spectroscopy (FT-IR) analysis, revealed that the acidity and redox properties of the catalyst surface play a pivotal role in the hydrolysis oxidation process. The hydrolysis oxidation of chlorinated volatile organic compounds not only effectively reduces pollutant concentrations but also prevents the generation of more toxic by-products. This dual benefit not only protects the environment but also minimizes ecological risks, highlighting the potential of this technology for sustainable environmental remediation. Full article

Portland cement is one of the most widely used construction materials employed in both large-scale structures and everyday applications. Although various materials are often added during production to enhance their performance, NaCl can be introduced in the process for various reasons. Despite this issue, existing studies lack sufficient quantitative data on the effects of NaCl on cement properties. Therefore, this study aims to investigate the physical and chemical degradation mechanisms in cement containing NaCl. Cement specimens were prepared by mixing cement, water, and NaCl, followed by stirring at 60 rpm and curing at room temperature for seven days. Microstructural changes as a function of the NaCl concentration were analyzed using scanning electron microscopy (SEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). Electrochemical properties were evaluated via open-circuit potential (OCP) measurements, electrochemical impedance spectroscopy (EIS), and potentiodynamic polarization tests. The results indicate that increasing the NaCl concentration leads to the formation of fine precipitates, the degradation of the cement matrix, and the reduced stability of major hydration products. Furthermore, the electrochemical analysis revealed that higher NaCl concentrations weaken the passive layer on the cement surface, resulting in an increased corrosion rate from 1 × 10⁻⁷ to 4 × 10⁻⁷ on the active polarization of the potentiodynamic polarization curve. Additionally, the pitting potential (E_pit) decreased from 0.73 V to 0.61 V with an increasing NaCl concentration up to 3 wt.%. This study quantitatively evaluates the impact of NaCl on the durability of Portland cement and provides fundamental data to ensure the long-term stability of cement structures in chloride-rich environments. Full article

The development of high-performance electrochromic materials demands innovative approaches to simultaneously control the nanoscale architecture and the electronic structure. We present a dual-modification strategy that synergistically combines copper doping with the Langmuir–Blodgett (LB) assembly to overcome the traditional performance trade-offs in tungsten oxide-based electrochromic systems. Cu-doped W₁₈O₄₉ nanowires with varying Cu concentrations (0–12 mol%) were synthesized hydrothermally and assembled into thin films via the LB technique, with LB precursors characterized by contact angle, surface tension, viscosity, and thermogravimetric-differential scanning calorimetry (TG-DSC) analyses. The films were systematically evaluated using scanning electron microscopy, X-ray photoelectron spectroscopy, chronoamperometry, and transmittance spectroscopy. Experimental results reveal an optimal Cu-doping concentration of 8 mol%, achieving a near-infrared optical modulation amplitude of 76.24% at 1066 nm, rapid switching kinetics (coloring/bleaching: 5.0/3.0 s), and a coloration efficiency of 133.00 cm²/C. This performance is speculated to be a balance between Cu-induced improvements in ion intercalation kinetics and LB-ordering degradation caused by lattice strain and interfacial charge redistribution, while mitigating excessive doping effects such as structural deterioration and thermodynamic instability. The work establishes a dual-modification framework for designing high-performance electrochromic interfaces, emphasizing the critical role of surface chemistry and nanoscale assembly in advancing adaptive optoelectronic devices like smart windows. Full article

Bamboo, as a sustainable and renewable biomass resource, possesses significant application prospects along with underutilized potential. However, challenges such as mildew infestation, insect damage, and discoloration during processing and utilization negatively impact its service life and economic value. This study proposes a simplified hydrogen peroxide bleaching method for bamboo processing, resulting in bleached materials with uniform coloration and improved mildew resistance. The scanning electron microscopy (SEM) analysis of bleached bamboo showed significantly reduced starch and protein inclusions, expanded intercellular spacing, partial fiber detachment, and localized structural deformation in treated bamboo. The X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR) analyses revealed substantial lignin degradation in hydrogen peroxide-treated samples. The color difference (ΔE) was measured at 13.65 between treated and untreated samples, confirming effective bleaching efficacy. The mercury intrusion porosimetry (MIP) analysis revealed enhanced porosity accompanied by diameter enlargement in treated bamboo. Antifungal assessments indicated that hydrogen peroxide bleaching delayed the onset of mold colonization and significantly enhanced the mildew resistance of bamboo substrates. Full article

The design of efficient and stable visible-light-driven photocatalysts is paramount for sustainable hydrogen (H₂) evolution and the degradation of organophosphorus pesticides, exemplified by dichlorvos (DDVP). In this work, we synthesized a co-catalyst-free nanocomposite photocatalyst composed of Al₆Si₂O₁₃ (ASO) and Cd_8.05Zn_1.95S₁₀ (ZCS). By constructing a Type-I heterojunction, the optimized ASO/ZCS-1 nanocomposite (ASO loading ratio: 30%) enhanced visible-light-driven H₂ evolution activity (5.1 mmol g⁻¹ h⁻¹), nearly doubling that of pristine ZCS (2.7 mmol g⁻¹ h⁻¹). Stability assessments revealed catalytic durability for ASO/ZCS-1 over five successive cycles, whereas the activity of pure ZCS precipitously declined to 59.7% of its initial level. Additionally, ASO, ZCS, and ASO/ZCS-2 (ASO loading ratio: 50%) demonstrated notable photocatalytic efficiency toward DDVP degradation without any co-catalyst, reducing DDVP concentration to 56.2% (ASO), 18.9% (ASO/ZCS-2), and 38.4% (ZCS), with corresponding degradation stability of 93.8%, 95.1%, and 93.8%, respectively. These results underscore the superior photocatalytic activity and stability of ASO, ZCS, and ASO/ZCS in the remediation of organophosphorus pesticides, with the Type-I heterojunction structure of ASO/ZCS enhancing both degradation activity and stability. Comprehensive characterizations by X-ray photoelectron spectroscopy (XPS), ultraviolet–visible diffuse reflectance spectroscopy (UV–vis DRS), and differential charge density analyses verified the Type-I heterojunction charge-transfer mechanism, effectively suppressing charge recombination and thus improving photocatalytic performance. Consequently, ASO/ZCS nanocomposites exhibit significant promise for broad applications in sustainable H₂ production, pollutant degradation, and ensuring food and agricultural product safety. Full article

Rapid industrialization has escalated environmental pollution caused by organic compounds, posing critical challenges for wastewater treatment. Advanced oxidation processes based on peroxymonosulfate (PMS) suffer from metal leaching and catalyst recycling challenges. To address these limitations, this study developed a nitrogen-doped biochar aerogel (NBA) derived from poplar wood powder as an eco-friendly and easily recoverable PMS activator. The NBA catalyst, optimized by tuning the calcination temperature to achieve a specific surface area of 297.5 m² g⁻¹, achieved 97% bisphenol A (BPA) removal within 60 min with a catalyst dosage of 0.3 g/L and 1.0 mM PMS under mild conditions. The material exhibited broad pH adaptability (pH 3.5–9), recyclability (>94% efficiency after thermal treatment), and versatility in degrading seven pollutants (BPA, phenol, 4-chlorophenol, 2,4-dichlorophenol, 2,4,6-trichlorophenol, rhodamine 6G, and levofloxacin) through synergistic radical (•OH, SO₄^•−, O₂^•−) and non-radical (¹O₂) pathways. X-ray photoelectron spectroscopy (XPS) analyses revealed that nitrogen doping enhanced PMS activation by optimizing electronic structures. This study highlights the potential of waste biomass-derived carbon aerogels as eco-friendly, efficient, and reusable catalysts for advanced oxidation processes in wastewater treatment. Full article