28 Results Found

The one of the most important issues in constructing light-harvesting photovoltaic (PV) systems with a charge storage element is its reliable and uninterrupted use in highly variable and weather-dependent conditions in everyday applications. Herein,...

Photocatalysis as an eco-friendly technology has the potential to achieve the Sustainable Development Goals (SDGs). However, an improvement of conventional photocatalysts is necessary to overcome their limitations such as slow kinetics, wavelength fo...

Next-generation renewable energy sources and perovskite solar cells have revolutionised photovoltaics research and the photovoltaic industry. However, the presence of toxic lead in perovskite solar cells hampers their commercialisation. Lead-free tin...

Recently, use of supercapacitors as energy storage systems has attracted considerable attention. However, the literature is scarce of information about the optimization of hybrid systems, using supercapacitors as the main energy storage system. In ou...

This paper proposes a concept of battery-assisted battery charger with maximum power point tracking for DC energy transducer such as thermoelectric generator and photo voltaic generator, and shows experimental results to prove the concept. The DC ene...

Coherent spin dynamics of charge carriers in CsPbBr3 perovskite nanocrystals are studied in a temperature range of 4–300 K and in magnetic fields of up to 500 mT using time-resolved pump-probe Faraday rotation and differential transmission tech...

The paper deals with a grid-connected single-phase battery charger integrated with photovoltaic generators (PVGs). The circuit topology consists of a multilevel architecture based on a Cascaded H-Bridge (CHB) rectifier. Its main task is to charge the...

A grid energy storage system for photo voltaic (PV) applications contains three different power sources i.e., PV array, battery storage system and the grid. It is advisable to isolate these three different sources to ensure the equipment safety. The...

The Image Transceiver Device (ITD) design is based on combining LCOS micro-display, image processing tools and back illuminated APS imager in single CMOS chip [1]. The device is under development for Head-Mounted Display applications in augmented and...

In laser multiphoton electron extraction spectroscopy (MEES), the photo-charges extracted from a surface by a pulsed laser beam are recorded as a function of laser wavelength. We report the first application of this spectroscopy to banknotes. Various...

Fluctuant irradiance conditions constitute a challenge in front of a proper battery charging process, when originated from a PhotoVoltaic Array (PVA). The behavior of the PVA under such conditions (i.e., reflected by a disturbed PV characteristic cur...

In this study, the sensing mechanism of (2E,4E)-5-(4-(dimethylamino)phenyl)-1-(2-(2,4dinitrophenoxy)phenyl)penta-2,4-dien-1-one (DAPH-DNP) towards thiophenols was investigated by density functional theory (DFT) and time-dependent DFT (TD-DFT). The DN...

TiO2 photoelectrode has become an attractive platform due to its excellent photoelectric performance and has been widely used in battery, photocatalysis, and other photoelectric fields. However, when the TiO2 photoelectrode is used in solar flow batt...

The specific roles played by both support and noble metals in light absorption, charge separation, and the formation of ·OH and O2− (ROS) are analyzed for light-triggered oxidation of phenol (Ph) over pristine and over noble metal (Ag, Au, Pt) -loade...

Solar conversion devices are generally connected with energy storage systems to overcome the influence of sunlight variability. Developing an integrated solar energy conversion and storage device is an attractive approach to compensate for the energy...

Integrating a photoelectrode into a zinc-air battery is a promising approach to reducing the overpotential required for charging a metal-air battery by using solar energy. In this work, a photo-fuel cell employing a Nb2O5/CdS photoanode and a Zn foil...

One of the most challenging issues in photocatalytic hydrogen evolution is to efficiently separate photocharge carriers. Although MoS2 loading could effectively improve the photoactivity of TiO2, a fundamental understanding of the charge transfer pro...

Mainly driven by automotive applications, there is an increasing interest in image sensors combining a high dynamic range (HDR) and immunity to the flicker issue. The native HDR pixel concept based on a parallel electron and hole collection for, resp...

This paper provides a design, a charging control, and energy management of a movable Photo Voltaic (PV) charging station with an Automatic Battery Replacement (ABR) system to enable drones for ongoing missions. The paper represents the first stage of...

The coexistence of two spin components with different Larmor frequencies in colloidal CdSe and CdS quantum dots (QDs) leads to the entanglement of spin signals, complicating the analysis of dynamic processes and hampering practical applications. Here...

We have explored an efficient strategy to enhance the overall photocatalytic performances of layered perovskites by increasing the density of hydroxyl group by protonation. The experimental procedure consisted of the slow replacement of interlayer Rb...

This study reports an integrated device in which a lithium-ion battery (LIB) and Si solar cells are interconnected. The LIB is fabricated using the Li(Ni0.65Co0.15Mn0.20)O2 (NCM622) cathode and the Li4Ti5O12 (LTO) anode. The surface and shape morphol...

To address the problem of suboptimal performance in deep eutectic solvents displayed by traditional TiO2 photoelectrodes and Cu2O photoelectrodes that have undergone simplistic modifications that result in a mismatch with battery discharge capacity,...

In a pure nematic liquid crystal (NLC) cell, optically induced charge carriers followed by transports in double border interfaces of orientant/LC and indium-tin-oxide (ITO)/orientant (or LC) can cause removal of screening of the static electric field...

Photocatalytic degradation is one of the environmentally friendly methods used in treating dye wastewater. In this study, a series of MXene/g-C3N4 heterostructure photocatalysts with different loading amounts of MXene (1, 4, 8, and 12 wt.%) were succ...

The development of highly efficient and stable photocatalysts is of critical importance for the removal of environmental pollutants, such as paraben preservatives. In this work, carbon quantum dots (CQDs) were used to modify bismuth vanadate (BiVO4)...

Visible light-driven photocatalyst BiFeO3 (BFO) nanoparticles were synthesised by the auto-combustion method. The honey was used to fuel the auto combustion method to synthesise the BFO nanoparticles. The structural, optical and morphological activit...

Extensive research on organic solar cells (OSCs) over the past decade has led to efficiency improvements exceeding 18%. Enhancing the efficacy of binary organic solar cells involves multiple factors, including the strategic selection of materials. Th...