This study is aimed at preparing C8–C16 alkene through oligomerization of a butene mixture using nickel oxide supported on mesoporous aluminosilicate. Mesoporous aluminosilicate with an ordered structure was successfully synthesized from HZSM-5...
The presented report focuses on an in-depth detailed characterization of immobilized methyltrioxorhenium (MTO), giving catalysts with a wide spectra of utilization. The range of mesoporous materials with different SiO2/Al2O3 ratios, namely mesoporous...
The present work was aimed to investigate the catalytic activity of a mesoporous catalyst synthesized from 3-mercaptopropyltrimethoxysilane (MPTS) functionalized Amazonian flint kaolin in the acetylation of eugenol with acetic anhydride. Materials we...
The oxidative dehydrogenation of alkanes is a prospective method for olefins production. CO2-assisted propane dehydrogenation over metal oxide catalysts provides an opportunity to increase propylene production with collateral CO2 utilization. We prep...
Inactivation of bacteria under the influence of visible light in presence of nanostructured materials is an alternative approach to overcome the serious problem of the growing resistance of pathogenic bacteria to antibiotics. Cadmium sulfide quantum...
This paper reports the synthesis and structural analysis of mesoporous silica materials with the use of aluminum phyllosilicate clay (bentonite) as an alternative silica source. In the proposed synthesis, bentonite, as natural aluminosilicate, was us...
One of the valuable fractions of paraffinic oils is the diesel fraction, which can be used as a commercial fuel. However, the high content of alkanes of normal structure (~10–40%) in the diesel fraction leads to a deterioration in the performan...
We have successfully incorporated iron species into mesoporous aluminosilicates (Al-SBA-15) using a simple mechanochemical milling method. The catalysts were characterized by nitrogen physisorption, inductively coupled plasma mass spectrometry (ICP-M...
Mesoporous ruthenium catalysts (0.74–3.06 wt%) based on ordered Mobil Composition of Matter No. 41 (MCM-41) silica arrays on aluminosilicate halloysite nanotubes (HNTs), as well as HNT-based counterparts, were synthesized and tested in benzene...
Ordered mesoporous SBA-15 analogs with different Si/Al ratios were successfully prepared in a two-step process from self-assembly of ZSM-5 nanoseeds at high temperature in mildly acidic media (473 K, pH 3.5). The obtained products were characterized...
Tetraethyl-orthosilicate (TEOS)-based nanoparticles are most extensively used as a silica-based hemoglobin carrier system. However, TEOS-based nanoparticles induce adverse effects on the hemoglobin structure. Therefore, a heulandite-calcium-based car...
Catalytic steam gasification of extra-heavy oil (EHO) fractions was studied using functionalized aluminosilicates, with NiO, MoO3, and/or CoO nanoparticles with the aim of evaluating the synergistic effect between active phase and the support in heav...
The Special Issue of Nanomaterials “Ordered Mesoporous Nanomaterials” covers novel synthetic aspects of mesoporous materials and explores their use in diverse areas like drug delivery, photocatalysis, filtration or electrocatalysis. The range of mate...
In this study, three solid acid catalysts, namely mesoporous aluminophosphate-supported 12-tungstophosphoric heteropoly acid (HPW/MAP), mesoporous aluminosilicate-supported 12-tungstophosphoric heteropoly acid (HPW/MAS), and gamma alumina-supported 1...
Aluminosilicate and ZSM-5 catalyst were synthesized from local materials, low-grade Indonesian kaolin. High quartz impurities content in the low-grade kaolin was successfully reduced by the consecutive treatment process including washing, centrifugat...
Highly linear octene isomers can be produced from n-butene on industrial scale by using Ni-containing aluminosilicates as heterogeneous catalysts. These catalysts can be prepared by impregnating an aluminosilicate with a Ni(II) salt solution. This le...
Zeolites are microporous crystalline aluminosilicates with a number of useful properties including acidity, hydrothermal stability, and structural selectivity. However, the exclusive presence of micropores restricts diffusive mass transport and reduc...
Al-SBA-15 materials were functionalized by ball milling with several niobium loadings (0.25–1 wt.%) and/or with several F- loadings, using NH4F as a precursor. The catalysts synthesized in this study were characterised by X-ray diffraction (XRD), N2...
Zeolites are micro- and mesoporous aluminosilicate minerals (both natural and industrially produced) widely used as catalysts and sorbents in domestic and commercial water purification and separation technologies. Their ability to selectively adsorb...
Controlling the particle size as well as porosity and shape of silica nanoparticles is always a big challenge while tuning their properties. Here, we designed a cost-effective, novel, green synthetic method for the preparation of perforated hollow me...
The recovery and immobilization of metals from wastewater often occurs in an acidic environment that destroys the structure of adsorbents such as zeolites, which are porous crystalline aluminosilicates. The influence of hydrochloric acid solutions on...
There is a demand for renewable resources, such as biomass, to produce compounds considered as platform molecules. This study deals with dehydration of fructose for the formation of 5-hydroxymethylfurfural (HMF), a feedstock molecule. Different catal...
This paper reports on a unique reversible reducing and oxidizing (redox) property of Co(III) in Co-doped amorphous SiO2/γ-Al2O3 composites. The Fenton reaction during the H2O2-catalyzed sol–gel synthesis utilized in this study lead to the...
Realizing the green recycling of sludge is an important link to effectively solve the problem of sludge disposal. In this paper, sewage sludge (SS) and rice husk (RH) were utilized as raw materials in preparing novel ceramsite (SRC) for the treatment...
Hierarchical zeolites are aluminosilicates with a crystal structure, which next to the micropores possess secondary porosity in the range of mesopores and/or small macropores. Due to their ordered structure and additional secondary porosity, they hav...
A new prepared catalyst, 12-molybdophosphoric acid (HPMo) anchored to the mesoporous aluminosilicate AlSiM, synthesized from Amazon kaolin, was characterized and used as a heterogeneous acid catalyst for the production of eugenyl acetate by acetylati...
Magnetically separable nanocatalysts were synthesized by incorporating iron nanoparticles on a mesoporous aluminosilicate (Al-SBA-15) through a mechanochemical grinding pathway in a single step. Noticeably, magnetic features were achieved by employin...
Extraction of metal ions from polluted waters and immobilization of metals in contaminated soils can be conducted using zeolites—porous aluminosilicate ion exchangers. The uptake of copper and zinc ions by the Georgian natural heulandite was st...
In this study, novel and cost-effective alkali-activated materials (AAMs) for catalytic applications were developed by using an industrial side stream, i.e., blast furnace slag (BFS). AAMs can be prepared from aluminosilicate precursors under mild co...
The addition of biocarriers can improve biological processes in bioreactors, since their surface allows for the immobilization, attachment, protection, and growth of microorganisms. In addition, the development of a biofilm layer allows for the colon...
Nanopowders of hydroxyapatite (HA) and Fe-substituted hydroxyapatite (HAFe) were synthesized by wet precipitation on either MCM-41 (a synthetic, mesoporous aluminosilicate material) or an aluminum-containing MCM-41 (AlMCM) support. According to X-ray...
Several studies show a synergistic effect between intumescent formulations and aluminosilicates, such as zeolites and clays, but little is known about the effect of acidity of these additives on the synergistic action. In this work, H-ZSM-5 zeolite w...
Zeolite-geopolymer hybrid materials have been formed when kaolin was used as a starting material. Their characteristics are of interest because they can have a wide pore size distribution with micro- and meso-pores due to the zeolite and geopolymer,...
Shrinkage during hardening and curing is one of the largest challenges for the widespread application of metakaolin-based geopolymers (MKGs). To solve this problem, a silane coupling agent (SCA) and waterborne epoxy resin (WER) were used to synthesiz...
Research on the formulation of estolides from plant seed oils has attracted substantial attention due to their favorable low-temperature properties and environmentally friendly nature. The present research investigates the formulation of canola biodi...
Geopolymers are zeolites like structures based on hydrated aluminosilicates units of SiO4 and AlO4. These units, known as poly(sialate), poly(sialate)-siloxo or poly(sialate)-disiloxo are chemically balanced by the group I cations of K+, Li+, or Na+....
Natural zeolites are crystalline hydrated alkali metal and alkaline earth metal aluminosilicates with unique ion-exchange and sorption properties. The exceptional structure of pores gives natural zeolites several application possibilities, especially...