Search Results (28)

Background: Pelvic resections represent some of the most challenging procedures in orthopedic oncology, often necessitating the sacrifice of large bone segments and, subsequently, the loss of nearby soft tissues. Our study aims to evaluate the impact of surgical resections of pelvic bone tumors on the performance of the pelvic floor and digestive, urinary, and genital systems. Methods: We evaluated all malignant or locally aggressive pelvic bone tumors treated with bone resection in our institution between January 2017 and January 2024. The reconstructive approaches were recorded. Pre- and post-operative MRI and CT scans were used to evaluate the grade of pelvic prolapse. The prolapse of the pelvic floor was assessed with the M-line, the H-line, and the anorectal angle. Hydronephrosis was also evaluated. Urinary and fecal incontinence were evaluated with the Pelvic Floor Impact Questionnaire (PFIQ7). Results: Thirty cases were included in our study. Nine cases were treated with custom-made prostheses, five had ice-cone prostheses, two massive allografts, and one composite allograft-prosthesis. The others had no bone reconstruction. Meshes were used to reconstruct the pelvic floor in 9 cases. Patients with discontinuity of the pelvic ring had a significantly higher grade of pelvic prolapse (M-line) and worse PFIQ7 scores. Conclusions: The resection of pelvic bone tumors represents one of the main challenges in orthopedic oncology. While planning surgical demolition and performing the subsequent reconstruction, surgeons should also consider the impact of the surgical treatment on the pelvic floor and surrounding organs. Intra-operative reconstructions and post-operative rehabilitation are advisable. Full article

Background: A total of 50% of patients with AL amyloidosis have t(11;14) translocation, allowing us to use the selective oral BCL-2 inhibitor venetoclax in their treatment. Case presentation: Our patient was admitted to the gastroenterology department due to weight loss and abdominal pain. An abdominal CT scan revealed some enlarged lymph nodes; therefore, he was referred to the hematology department. A bone marrow biopsy showed massive amorphous amyloid deposition. The sample was positive on Congo red staining and exhibited double refraction under a polarized light microscope. Serum-free light chains and the difference between involved and uninvolved free light chains (dFLCs) were elevated. Using fluorescent in situ hybridization, we detected t(11;14) translocation. Further examinations confirmed the involvement of the liver, colon and heart. Stage II AL amyloidosis was confirmed. Our patient received combined induction therapy with CyBorD and venetoclax due to the presence of the t(11;14) translocation. After six cycles, the patient achieved complete remission. Autologous stem cell transplantation (ASCT) was performed. At 100 days post-ASCT, the patient had complete hematologic remission. Venetoclax maintenance treatment was initiated. The follow-up examinations showed that the patient is in very good partial remission. Conclusions: In the case of our AL amyloidosis patient with t(11;14) translocation, the combined treatment with CyBorD and venetoclax was well tolerated and effective. Full article

Background/Objectives: Classical reverse shoulder arthroplasty (RSA) with a high neck–shaft angle (NSA) of 155° has shown satisfactory outcomes. However, newer RSA designs aim to improve results by modifying the stem design. This study evaluates the 5-year outcomes of a stem design featuring a rectangular metadiaphyseal fixation and a 135° NSA. Methods: This prospective bicentric case series included and longitudinally followed up patients that were treated for cuff arthropathy, massive irreparable rotator cuff tears, or eccentric osteoarthritis using a non-cemented rectangular metadiaphyseal fixation stem with a 135° NSA (Univers Revers, Arthrex, Naples, FL, USA). Subjective and objective functional outcome scores (Constant–Murley Score (CS), Shoulder Pain and Disability Index (SPADI), and Subjective Shoulder Value (SSV)), range of motion (ROM), radiographic outcome, adverse events, complications, and quality of life were investigated. Results: This study enrolled 132 patients (59% female, mean age 75 years, SD 6). At the 5-year follow-up, subjective and objective outcomes significantly improved compared to baseline: CS (32.9 to 71.7, p < 0.001), SPADI (38.7 to 86.2, p < 0.001), and SSV (43.0 to 84.1, p < 0.001). ROM improved in flexion (80° to 142.4°, p < 0.001), abduction (71.5° to 130.2°, p < 0.001), internal rotation (p < 0.001), internal rotation at 90° abduction (12.7° to 45.0°, p < 0.001), and abduction strength (0.8 kg to 5.2 kg, p < 0.001). External rotation remained unchanged (32.1° to 32.0°, p = 0.125), but external rotation at 90° abduction improved (20.9° to 52.7°, p < 0.001). No signs of implant migration, subsidence, shift, tilt, alignment loss, or wear were observed, but scapular bone spur formation (11%), scapular notching grade 1 (10%), bone resorption (10%), and partial humeral radiolucent lines (1%) were reported. Conclusions: Rectangular stems with metadiaphyseal fixation and a 135° neck–shaft angle in RSA consistently improve shoulder function, showing no aseptic loosening and minimal radiological changes at 5 years. Full article

This study investigates the morphological impact of using three-dimensional (3D) printed custom implants in surgical hip reconstruction compared to the conventional bone graft and standard size implant methods. An amount of 16 patients at the Rizzoli Orthopaedic Institute who underwent hip reconstruction surgery for tumors involving the P2 pelvis region were selected using stratified sampling. Half of them were randomly selected to receive 3D-printed implants, and the other half were selected to receive standard implants with bone grafts. Six months post-surgery, computed tomography (CT) scans were used to identify the hip joint center of rotation and to measure greater the trochanter offset and acetabular inclination angle. These CT scans were also used to construct a 3D model of the pelvis for 3D measurements. The results show no significant differences in accuracy, using Student’s t-test and Mann–Whitney U-test (p-value > 0.05), between the two methods for reconstructing the hip joint center of rotation or greater trochanter offset. However, 3D-printed implants showed statistically significant greater precision, using Student’s t-test (p-value < 0.05), in reconstructing the acetabular inclination angle compared to the conventional bone graft and standard-sized off-the-shelf implants. This superior precision reduces the risk of impingement of the femur implant neck with the acetabulum implant cup, which directly relates to improved implant survivorship. These findings support the continued exploration of 3D printing technology for personalized orthopedic solutions. Full article

A squamous odontogenic tumor (SOT) is an epithelial locally benign neoplasia derived from the periodontium of the jaws. It is considered a lesion of low incidence. Predominantly, it affects the mandible, although both jaw bones may be involved. Here, we discuss the malignant clinical evolution of an SOT lesion in an 80-year-old female patient. The patient exhibited an expansive triangular lesion at the inferior right quadrant. Surgery was performed and an SOT was diagnosed (2019). Two years after, the lesion grew, and the analysis of the biopsy revealed SOT malignization with pleomorphic atypical squamous cells, characteristics of a squamous cell carcinoma (2021). Massive DNA sequencing of formalin-fixed–paraffin-embedded specimens of the initial and relapsed tumors indicated pathogenic mutations in RET and POLE genes in both tumors, loss of ALK, and gain of CDKN1B and MAP2K in the relapse. In addition, the clinical, radiographic, and microscopic features of this neoplasm are discussed and compared with those already published. The case presented contributes to the better understanding of this SOT tumor entity and to indicates its malignant evolution, together with its biological behavior and its histologic, clinical, and radiographic features. Also, it aims to stress the importance of deeper genetic analyses in rare diseases to uncover mutations that help to select a personalized treatment. Full article

We present a case of a 59-year-old male diagnosed with polycythemia vera (PV) for many years, who presented with a relatively abrupt onset of heavy constitutional symptoms, including fatigue, night sweats, and a 10% weight loss over 6 weeks. Despite the known initial diagnosis of PV, the presence of profound B-symptoms prompted further investigation. A positron emission tomography/computed tomography (PET/CT) scan with ¹⁸F-Fluorodeoxyglucose ([¹⁸F]FDG) was performed to exclude malignant diseases. The [¹⁸F]FDG PET/CT revealed intense metabolic activity in the bone marrow of the proximal extremities and trunk skeleton, as well as a massively enlarged spleen with increased metabolic activity. Histopathologically, a transformation to myelofibrosis was revealed on a bone marrow biopsy. The case intends to serve as an exemplification for [¹⁸F]FDG PET/CT in PV with transformation to myelofibrosis (post-PV myelofibrosis). Full article

Periprosthetic joint infections (PJI) and fracture-related infections (FRI) of the distal femur (DF) may result in massive bone defects. Treatment options include articulated silver-coated (SC) megaprosthesis (MP) in the context of a two-stage protocol. However, there is limited evidence in the literature on this topic. A retrospective review of the prospectively maintained databases of three Institutions was performed. Forty-five patients were included. The mean follow-up time was 43 ± 17.1 months. Eight (17.8%) patients had a recurrent infection. The estimated recurrence-free survival rate was 91.1% (93.5% PJI vs. 85.7% FRI) 2 years following MP implantation, and 75.7% (83.2% PJI vs. 64.3% FRI; p = 0.253) after 5 years. No statistically relevant difference was found according to the initial diagnosis (PJI vs. FRI). Among possible risk factors, only resection length was found to significantly worsen the outcomes in terms of infection control (p = 0.031). A total of eight complications not related to infection were found after reimplantation, but only five of them required further surgery. Above-the-knee amputation was performed in two cases (4.4%), both for reinfection. Articulated DF SC MP in a two-stage protocol is a safe and effective treatment for chronic knee infection with severe bone loss. Full article

Modular megaprostheses (MPs) are commonly used after bone-tumor resection, but they can offer a limb salvage solution in massive bone defects. The aim of this systematic review of the Literature is to provide a comprehensive data collection concerning the use of MPs in non-oncologic cases, and to provide an overview of this topic, especially from an epidemiologic point of view. Three different databases (PubMed, Scopus, and Web of Science) were searched for relevant articles, and further references were obtained by cross-referencing. Sixty-nine studies met the inclusion criteria, reporting on cases of MP in non-oncologic cases. A total of 2598 MPs were retrieved. Among these, 1353 (52.1%) were distal femur MPs, 941 (36.2%) were proximal femur MPs, 29 (1.4%) were proximal tibia MPs and 259 (10.0%) were total femur MPs. Megaprostheses were most commonly used to treat periprosthetic fractures (1158 cases, 44.6%), in particular in the distal femur (859, 74.2%). Overall, complications were observed in 513 cases (19.7%). Type I (soft tissue failures) and type IV (infection) according to the Henderson classification were the most frequent (158 and 213, respectively). In conclusion, patients with severe post-traumatic deformities and/or significant bone loss who have had previous septic complications should be considered as oncologic patients, not because of the disease, but because of the limited therapeutic options available. The benefits of this treatment include relatively short operative times and immediate weight-bearing, thus making MP particularly attractive in the lower limb. Full article

Orthopedic oncology has begun to use three-dimensional-printing technology, which is expected to improve the accuracy of osteotomies, ensure a safe margin, and facilitate precise surgery. However, several difficulties should be considered. Cadaver and clinical studies have reported more accurate osteotomies for bone-tumor resection using patient-specific cutting guides, especially in challenging areas such as the sacrum and pelvis, compared to manual osteotomies. Patient-specific cutting guides can help surgeons achieve resection with negative margins and reduce blood loss and operating time. Furthermore, this patient-specific cutting guide could be combined with more precise reconstruction using patient-specific implants or massive bone allografts. This review provides an overview of the basic technologies used in the production of patient-specific cutting guides and discusses their current status, advantages, and limitations. Moreover, we summarize cadaveric and clinical studies on the use of these guides in orthopedic oncology. Full article

Posterior spinal fusion (PSF) is the standard procedure for the treatment of severe scoliosis. PSF is a standard procedure that combines posterior instrumentation with bone grafting and/or bone substitutes to enhance fusion. The aim of this retrospective study was to evaluate and compare the post-operative safety and efficiency of stand-alone bioactive glass putty and granules in posterior spine fusion for scoliosis in a paediatric cohort. A total of 43 children and adolescents were included retrospectively. Each patient’s last follow-up was performed at 24 months and included clinical and radiological evaluations. Pseudarthrosis was defined as a loss of correction measuring >10° of Cobb angle between the pre-operative and last follow-up measurements. There was no significant loss of correction between the immediate post-operative timepoint and the 24-month follow-up. There was no sign of non-union, implant displacement or rod breakage. Bioactive glass in the form of putty or granules is an easily handled biomaterial but still a newcomer on the market. This study shows that the massive use of bioactive glass in posterior fusion, when combined with proper surgical planning, hardware placement and correction, is effective in providing good clinical and radiological outcomes. Full article

The lack of viability of massive bone allografts for critical-size bone defect treatment remains a challenge in orthopedic surgery. The literature has reviewed the advantages of a multi-combined treatment with the synergy of an osteoconductive extracellular matrix (ECM), osteogenic stem cells, and growth factors (GFs). Questions are still open about the need for ECM components, the influence of the decellularization process on the latter, the related potential loss of function, and the necessity of using pre-differentiated cells. In order to fill in this gap, a bone allograft surrounded by an osteogenic membrane made of a decellularized collagen matrix from human fascia lata and seeded with periosteal mesenchymal stem cells (PMSCs) was analyzed in terms of de-/recellularization, osteogenic properties, PMSC self-differentiation, and angiogenic potential. While the decellularization processes altered the ECM content differently, the main GF content was decreased in soft tissues but relatively increased in hard bone tissues. The spontaneous osteogenic differentiation was necessarily obtained through contact with a mineralized bone matrix. Trying to deepen the knowledge on the complex matrix–cell interplay could further propel these tissue engineering concepts and lead us to provide the biological elements that allow bone integration in vivo. Full article

Introduction: a primary goal in revision total knee arthroplasty is to recreate and restore near-normal knee biomechanics by reapproximating the native anatomy. Tibial bone loss poses a challenge for surgeons. Bone cement, bone allograft, screws-in-cement, metaphyseal sleeves or cones, and metallic augments are some options for addressing bony deficiency, with endoprosthetic proximal tibia replacement a consideration for the most severe cases. Case Description: we present a case for the novel use of threaded Steinmann pins augmented with cement to reconstruct a massive tibial metaphyseal cortical defect during revision knee arthroplasty. A 76-year-old male presented with an infected primary total knee arthroplasty using MSIS (Musculoskeletal Infection Society) criteria and underwent a standard two-stage revision total knee arthroplasty once the knee was confirmed sterile. Intraoperatively, significant posteromedial and metaphyseal tibial bone loss was identified. In order to avoid proximal tibial replacement and the extensor mechanism complications seen with these, coupled with obligate gastrocnemius flap, a metaphyseal cone was utilized in the proximal tibia with four vertical threaded Steinmann pins spaced approximately 1 cm apart at its periphery, subsequently cut flush with the level of the cone after cementation to recreate the tibial cortex. The patient’s function and range of motion continue to improve with no evidence of structural complication at 2.5 years of follow-up. Discussion: the implementation of threaded Steinmann pins was utilized in this case to stabilize a cemented metaphyseal cone in the revision of an infected total knee with significant tibial bone loss. The threaded property may help prevent migration of these pins in comparison to smooth pins. Creation of a stable platform in a revision total knee arthroplasty poses a substantial challenge in the context of significant bone loss, and our case depicts a good short-term outcome and another option for surgeons to consider before moving toward endoprostheses. Full article

The critical importance of hypoxia-inducible factor (HIF)s in the regulation of endochondral bone formation is now well established. HIF protein levels are closely regulated by the prolyl hydroxylase domain-containing protein (PHD) mediated ubiquitin-proteasomal degradation pathway. Of the three PHD family members expressed in bone, we previously showed that mice with conditional disruption of the Phd2 gene in chondrocytes led to a massive increase in the trabecular bone mass of the long bones. By contrast, loss of Phd3 expression in chondrocytes had no skeletal effects. To investigate the role of Phd1 expressed in chondrocytes on skeletal development, we conditionally disrupted the Phd1 gene in chondrocytes by crossing Phd1 floxed mice with Collagen 2α1-Cre mice for evaluation of a skeletal phenotype. At 12 weeks of age, neither body weight nor body length was significantly different in the Cre⁺; Phd1^flox/flox conditional knockout (cKO) mice compared to Cre⁻; Phd1^flox/flox wild-type (WT) control mice. Micro-CT measurements revealed significant gender differences in the trabecular bone volume adjusted for tissue volume at the secondary spongiosa of the femur and the tibia for both genotypes, but no genotype differences were found for any of the trabecular bone measurements of either femur or tibia. Similarly, cortical bone parameters were not affected in the Phd1 cKO mice compared to control mice. Histomorphometric analyses revealed no significant differences in bone area, bone formation rate or mineral apposition rate in the secondary spongiosa of femurs between cKO and WT control mice. Loss of Phd1 expression in chondrocytes did not affect the expression of markers of chondrocytes (collage 2, collagen 10) or osteoblasts (alkaline phosphatase, bone sialoprotein) in the bones of cKO mice. Based on these and our published data, we conclude that of the three PHD family members, only Phd2 expressed in chondrocytes regulates endochondral bone formation and development of peak bone mass in mice. Full article

Reverse total shoulder arthroplasty presents itself sometimes as challenging when it comes to addressing massive bone loss, either in primary or revision settings. Custom components recently have made their way into shoulder prosthetics and are meant to help in the case of extensive glenoid bone destruction. Because of strict indication and the fairly recent introduction of these implants, the usage of custom-made glenoid implants is not very common yet. However, the early results are promising. The purpose of this review was to summarize and analyze the available literature. Therefore, a systematic review was performed according to PRISMA guidelines. A comprehensive search of the databases PubMed, Cochrane, and Livivo was performed to screen for studies reporting on clinical and radiological outcomes of custom glenoid implants. Four studies with a total of 46 shoulders were included in this review. The mean patient age was 68.8 years and the mean time of follow-up was 24.3 months. The weighted means showed an increase in CMS (32.7 points), in ASES (39.8 points), in anteversion (67.4 degrees), and in abduction (51.9 degrees) and a decrease in VAS (5.4 points). Custom-made glenoid implants are therefore a viable option in cases of large combined glenoid bone loss, both in primary and revision shoulder arthroplasty. Full article

Osteoporosis is characterized by an abnormal bone structure with low bone mass and degradation of microarchitecture. Oxidative stress induces imbalances in osteoblast and osteoclast activity, leading to bone degradation, a primary cause of secondary osteoporosis. Doxorubicin (DOX) is a widely used chemotherapy drug for treating cancer, known to induce secondary osteoporosis. The mechanism underlying DOX-induced bone loss is still not fully understood, but one of the relevant mechanisms is through a massive accumulation of reactive oxygen and nitrogen species (i.e., ROS and NOS) leading to oxidative stress. We investigated the effects of antioxidants Resveratrol and MitoTEMPO on DOX-induced bone impairment using the zebrafish model. DOX was shown to increase mortality, promote skeletal deformities, induce alterations on intestinal villi, impair growth and mineralization and significantly downregulate osteoblast differentiation markers osteocalcin 2 and osterix/sp7. Lipid peroxidation was significantly increased in DOX-supplemented groups as compared to control and antioxidants, suggesting ROS formation as one of the key factors for DOX-induced bone loss. Furthermore, DOX affected mineral contents, suggesting an altered mineral metabolism. However, upon supplementation with antioxidants, DOX-induced effects on mineral content were rescued. Our data show that supplementation with antioxidants effectively improves the overall growth and mineralization in zebrafish and counteracts DOX-induced bone anomalies. Full article