Search Results (16)

In nature, dynamic liquid interfaces play a vital role in regulating gas transport, as exemplified by the adaptive mechanisms of plant stomata and the liquid-lined alveoli, which enable efficient gas exchange through reversible opening and closing. These biological processes provide profound insights into the design of advanced gas control technologies. Inspired by these natural systems, liquid gating membranes have been developed utilizing capillary-stabilized liquids to achieve precise fluid regulation. These membranes offer unique advantages of rapid responses, stain resistance, and high energy efficiency. Particularly, they break through the limitations of traditional solid, porous membranes in gas transport. This perspective introduces bioinspired liquid gating gas valve membranes (LGVMs), emphasizing their opening/closing mechanism. It highlights how external stimuli can be exploited to enable advanced, multi-level gas control through active or passive regulation strategies. Diverse applications in gas flow regulation and selective gas transport are discussed. While challenges related to precise controllability, long-term stability, and scalable production persist, these advancements unlock significant opportunities for groundbreaking innovations across diverse fields, including gas purification, microfluidics, medical diagnostics, and energy harvesting technologies. Full article

Purpose: Water freely diffuses across cell membranes, making it suitable for measuring absolute tissue perfusion. In this study, we introduce an imaging method for conducting coronary artery angiography and quantifying myocardial perfusion across the entire heart using hyperpolarized water. Methods: ¹H was hyperpolarized using dissolution dynamic nuclear polarization (dDNP) with UV-generated radicals. Submillimeter resolution coronary artery images were acquired as 2D projections using a spoiled GRE (SPGRE) sequence gated on diastole. Dynamic perfusion images were obtained with a multi-slice SPGRE with diastole gating, covering the entire heart. Perfusion values were analyzed through histograms, and the most frequent estimated perfusion value (the mode of the distribution), was compared with the average values for ¹⁵O water PET from the literature. Results: A liquid state polarization of 10% at the time of the injection and a 30 s T₁ in D₂O TRIS buffer were measured. Both coronary artery and dynamic perfusion images exhibited good quality. The main and small coronary artery branches were well resolved. The most frequent estimated perfusion value is around 0.6 mL/g/min, which is lower than the average values obtained from the literature for ¹⁵O-water PET (around 1.1 and 1.5 mL/g/min). Conclusions: The study successfully demonstrated the feasibility of achieving high-resolution, motion-free coronary artery angiography and 3D whole-heart quantitative myocardial perfusion using hyperpolarized water. Full article

Protein kinase D1 (PRKD1) functions primarily in normal mammary cells, and the potassium voltage-gated channel subfamily Q member 3 (KCNQ3) gene plays an important role in controlling membrane potential and neuronal excitability, it has been found that this particular gene is linked to the percentage of milk fat in dairy cows. The purpose of this study was to investigate the relationship between nucleotide polymorphisms (SNPs) of PRKD1 and KCNQ3 genes and the milk quality of Gannan yak and to find molecular marker sites that may be used for milk quality breeding of Gannan yak. Three new SNPs were detected in the PRKD1 (g.283,619T>C, g.283,659C>A) and KCNQ3 gene (g.133,741T>C) of 172 Gannan lactating female yaks by Illumina yak cGPS 7K liquid-phase microarray technology. Milk composition was analyzed using a MilkoScan^TM milk composition analyzer. We found that the mutations of these three loci significantly improved the lactose, milk fat, casein, protein, non-fat milk solid (SNF) content and acidity of Gannan yaks. The lactose content of the TC heterozygous genotype population at g.283,619T>C locus was significantly higher than that of the TT wild-type population (p < 0.05); the milk fat content of the CA heterozygous genotype population at g.283,659C>A locus was significantly higher than that of the CC wild-type and AA mutant populations (p < 0.05); the casein, protein and acidity of the CC mutant and TC heterozygous groups at the g.133,741T>C locus were significantly higher than those of the wild type (p < 0.05), and the SNF of the TC heterozygous group was significantly higher than that of the mutant group (p < 0.05). The results showed that PRKD1 and KCNQ3 genes could be used as candidate genes affecting the milk traits of Gannan yak. Full article

2H MoTe₂ (molybdenum ditelluride) has generated significant interest because of its superconducting, nonvolatile memory, and semiconducting of new materials, and it has a large range of electrical properties. The combination of transition metal dichalcogenides (TMDCs) and two dimensional (2D) materials like hexagonal boron nitride (h-BN) in lateral heterostructures offers a unique platform for designing and engineering novel electronic devices. We report the fabrication of highly conductive interfaces in crystalline ionic liquid-gated (ILG) field-effect transistors (FETs) consisting of a few layers of MoTe₂/h-BN heterojunctions. In our initial exploration of tellurium-based semiconducting TMDs, we directed our attention to MoTe₂ crystals with thicknesses exceeding 12 nm. Our primary focus centered on investigating the transport characteristics and quantitatively assessing the surface interface heterostructure. Our transconductance (g_m) measurements indicate that the very efficient carrier modulation with an ILG FET is two times larger than standard back gating, and it demonstrates unipolarity of the device. The ILG FET exhibited highly unipolar p-type behavior with a high on/off ratio, and it significantly increased the mobility in MoTe₂/h-BN heterochannels, achieving improvement as one of the highest recorded mobility increments. Specifically, we observed hole and electron mobility values ranging from 345 cm² V⁻¹ s⁻¹ to 285 cm² V⁻¹ s⁻¹ at 80 K. We predict that our ability to observe the intrinsic, heterointerface conduction in the channels was due to a drastic reduction of the Schottky barriers, and electrostatic gating is suggested as a method for controlling the phase transitions in the few layers of TMDC FETs. Moreover, the simultaneous structural phase transitions throughout the sample, achieved through electrostatic doping control, presents new opportunities for developing phase change devices using atomically thin membranes. Full article

The present study evaluated the environmental impacts of post-combustion CO₂ capture and recovery via membrane–gas absorption processes. We have used SimaPro v.9 packages with the Ecoinvent v3.5 database employing two different methods, ReCiPe 2016 Endpoint (H) and Midpoint (H), considering a fundamental methodological framework to determine the most environmentally friendly experimental condition. Life cycle impact categories were examined and assessed supposing a functional unit of 1 kgCO₂/h recovered. Fourteen environmental impact categories including global warming, ozone depletion, eutrophication, and toxicity potentials have been evaluated within the context of a gate-to-gate approach focusing on only the process stage. Simulation results showed that the maximum liquid flow rate, sweep helium flow rate together with the minimum solvent concentration demonstrated the highest impact on human health, ecosystem, and resources. The usage of pure methyldiethanolamine (MDEA) activated by piperazine as a reactive absorbent provided the lowest environmental impact due to the elimination of the energy needed to heat and evaporate water present in aqueous absorbent solutions and the prevention of the excess water consumption depending on meeting the water needed for reactive absorption of CO₂ in tertiary amine MDEA from simulated humidified flue gas stream. The study highlights the importance of LCA in the determination of an environmentally more sustainable condition during the capture and recovery of post-combustion CO₂ by gas absorption and stripping using membrane contactors in tertiary amine MDEA. Full article

Point-of-care testing (POCT) techniques based on microfluidic devices enabled rapid and accurate tests on-site, playing an increasingly important role in public health. As the critical component of capillary-driven microfluidic devices for POCT use, the capillary microfluidic valve could schedule multi-step biochemical operations, potentially being used for broader complex POCT tasks. However, owing to the reciprocal relationship between the capillary force and aperture in single-pore microchannels, it was challenging to achieve a high gating threshold and high operable liquid volume simultaneously with existing 2D capillary trigger valves. This paper proposed a 3D capillary-driven multi-microporous membrane-based trigger valve to address the issue. Taking advantage of the high gating threshold determined by micropores and the self-driven capillary channel, a 3D trigger valve composed of a microporous membrane for valving and a wedge-shaped capillary channel for flow pumping was implemented. Utilizing the capillary pinning effect of the multi-micropore membrane, the liquid above the membrane could be triggered by putting the drainage agent into the wedge-shaped capillary channel to wet the underside of the membrane, and it could also be cut off by taking away the agent. After theoretical analysis and performance characterizations, the 3D trigger valve performed a high gating threshold (above 1000 Pa) and high trigger efficiency with an operable liquid volume above 150 μL and a trigger-to-drain time below 6 s. Furthermore, the retention and trigger states of the valve could be switched for repeatable triggering for three cycles within 5 min. Finally, the microbead-based immunoreaction and live cell staining applications verified the valve’s ability to perform multi-step operations. The above results showed that the proposed 3D trigger valve could be expected to play a part in wide-ranging POCT application scenarios. Full article

Liquid gating membranes with molecular-level smooth liquid lining layers break through the limitations of traditional porous membrane materials in gas transport control. Owing to the stable, self-healing, and reconfigurable properties, liquid gating membranes have shown wide application prospects in microfluidics, intelligent valves, chemical reactions, and beyond. Here, we develop a periodic gas transport control system based on the self-oscillating liquid gating membrane. Under continuous gas injection, the gas–liquid interface is reversibly deformed, enabling self-oscillating behavior for discontinuous and periodic gas transport without the need for any complex external changes to the original system. Meanwhile, our experimental analysis reveals that the periodic time and periodic gas release in the system can be regulated. Based on the cycle stability of the system, we further demonstrate the controllability of the system for periodic droplet manipulation in microfluidics. Looking forward, it will offer new opportunities for various applications, such as pneumatic robots, gas-involved chemical reactions, droplet microfluidics, and beyond. Full article

Stomata in the plant leaves are channels for gas exchange between the plants and the atmosphere. The gas exchange rate can be regulated by adjusting the opening and closing of stoma under the external stimuli, which plays a vital role in plant survival. Under visible light irradiation, the stomata open for gas exchange with the surroundings, while under intense UV light irradiation, the stomata close to prevent the moisture loss of plants from excessive transpiration. Inspired by this stomatal self-protection behavior, we have constructed a bioinspired photo-responsive liquid gating membrane (BPRLGM) through infusing the photo-responsive gating liquid obtained by dissolving the azobenzene-based photo-responsive surfactant molecules (AzoC₈F₁₅) in N,N-Dimethylacetamide (DMAC) into nylon porous substrate, which can reversibly switch the open/closed states under different photo-stimuli. Theoretical analysis and experimental data have demonstrated that the reversible photoisomerization of azobenzene-based surfactant molecules induces a change in surface tension of the photo-responsive gating liquid, which eventually results in the reversible variation of substantial critical pressure for gas through BPRLGM under alternating UV (P_{Critical (off)}) and visible (P_{Critical (on)}) light irradiations. Therefore, driven by a pressure difference ΔP between P_{Critical (on)} and P_{Critical (off)}, the reversible switches on the open/closed states of this photo-responsive liquid gating membrane can be realized under photo-stimuli. This bioinspired membrane with switchable open/closed liquid gating performance under photo-stimuli has the opportunity to be used in the precise and contactless control of microfluidics. Full article

Electroporation is a simple but effective and sustainable food processing way of treating cell membranes with an electric field. It is employed in a variety of ways in the food industry, ranging from shelf-life extension to green extraction. Despite its wide range of applications, electroporators are out of reach for many labs due to their high development costs, and different electroporators have been tailored to specific applications. The designing sequence of an electroporator that takes the geometry of a treatment chamber and its electrical resistance into account for the design of a pulse generator has not been addressed in published literature. To meet this demand, this study presents a straightforward way to develop a simple, affordable, and portable electroporator for liquid food pasteurisation. The proposed electroporator comprises a coaxial treatment chamber with static mixers and a high-voltage Marx bank based on insulated-gate bipolar transistors (IGBTs). The generator has a 4.5 kV output voltage and a peak current rating of 1 kA; however, the modular design allows for a wide range of voltage and current ratings. Treated orange juice using thermal pasteurisation (65 °C, 30 min) was also used for comparison. The performance of the electroporator was studied using chemical and microbial tests. A significant log reduction (5.4 CFU·mL⁻¹) was observed in both the PEF-treated samples with sieves. Additionally, the treated juice visual and chemical color analysis showed that the PEF-treated sample extended the shelf-life after 9 days of storage at 4 °C. This research also examines the energy conversion in these two processing steps. This study assists in developing further electroporators for other food applications with different treatment chambers without compromising the product’s quality. Full article

In photoluminescence spectroscopy experiments, the interaction mode of the polymer membrane Nafion with various amino-acids was studied. The experiments were performed with physiological NaCl solutions prepared in an ordinary water (the deuterium content is 157 ± 1 ppm) and also in deuterium-depleted water (the deuterium content is ≤1 ppm). These studies were motivated by the fact that when Nafion swells in ordinary water, the polymer fibers are effectively “unwound” into the liquid bulk, while in the case of deuterium-depleted water, the unwinding effect is missing. In addition, polymer fibers, unwound into the liquid bulk, are similar to the extracellular matrix (glycocalyx) on the cell membrane surface. It is of interest to clarify the role of unwound fibers in the interaction of amino-acids with the polymer membrane surface. It turned out that the interaction of amino-acids with the membrane surface gives rise to the effects of quenching luminescence from the luminescence centers. We first observed various dynamic regimes arising upon swelling the Nafion membrane in amino-acid suspension with various isotopic content, including triggering effects, which is similar to the processes in the logical gates of computers. Full article

The FDA’s approval of peptide drugs such as Ziconotide or Exendin for pain relief and diabetes treatment, respectively, enhanced the interest to explore novel conotoxins from Conus species venom. In general, conotoxins can be used in pathologies where voltage-gated channels, membrane receptors, or ligands alter normal physiological functions, as in metabolic diseases such as Type 2 diabetes. In this study, the synthetic cal14.2b (s-cal14.2b) from the unusual Californiconus californicus demonstrated bioactivity on NIT-1 insulinoma cell lines stimulating insulin secretion detecting by high performance liquid chromatography (HPLC). Accordingly, s-cal14.2b increased the Ca_V1.2/1.3 channel-current by 35 ± 4% with a recovery τ of 10.3 ± 4 s in primary cell culture of rat pancreatic β-cells. The in vivo results indicated a similar effect of insulin secretion on mice in the glucose tolerance curve model by reducing the glucose from 500 mg/dL to 106 mg/dL in 60 min, compared to the negative control of 325 mg/dL at the same time. The PET-SCAN with radiolabeling 99mTc-s-cal14.2b demonstrated biodistribution and accumulation in rat pancreas with complete depuration in 24 h. These findings show the potential therapeutic use of s-cal14.2b in endocrinal pathologies such as early stages of Type 2 Diabetes where the pancreas’s capability to produce insulin is still effective. Full article

Chromium, one of the top five toxic heavy metals ranked according to significance in public health by WHO, exists as Cr(III) which is naturally occurring or Cr(VI) which is anthropogenic in origin. The EPA specifies the maximum contaminant level in drinking water to be 10⁻⁶ M or 0.1 mg/L or 100 ppb for the total dissolved Cr. To ensure the water consumed by the population has these pollutants below the safe threshold, this report demonstrates a field effect transistor (FET) based sensor design incorporating a highly target specific ion-selective membrane combined with extended gate technology which manifests sensitivity exceeding the Nernst limit aided by the high field effect in the short gap region of extended gate technology. Characterization and repeated testing of the portable device revealed a commendable calibration sensitivity of 99 mV/log [Cr³⁺] and 71 mV/log [Cr⁶⁺] for Cr(III) and Cr(VI) respectively, well surpassing the Nernst limits of sensitivity and offering a detection limit lower than ion-selective electrodes (10⁻⁶ M), and comparable to the expensive benchtop laboratory instrument, ICP-MS. This report presents a robust, easy to fabricate, economic and efficient handheld biosensor to detect the chromium in a liquid sample whether it exists as Cr(III) or Cr(VI). Full article

In order to minimize unintentional discharge, supercapacitors are interfaced with a membrane that separates the anode from the cathode—this membrane is called the separator. We focus here on separators, which are structured as electronic diode-like. We call an electrically structured separator “the gate”. Through experiments, it was demonstrated that ionic liquid-filled supercapacitors, which were interfaced with gated separators exhibited a substantial capacitance (C) increase and reduction in the equivalent series resistance (ESR) compared to cells with ordinary separators. These two attributes help to increase the energy, which is stored in a cell, since for a given cell’s voltage, the dissipated energy on the cell, U_R = V²/4(ESR) and the stored energy, U_C = CV²/2, would increase. These were indeed ionic diodes since the order of the diode layout mattered—the diode-like structures exhibited maximum capacitance when their p-side faced the auxiliary electrode. Full article

We present herein a novel method of bipolar field-effect control on DC electroosmosis (DCEO) from a physical point of view, in the context of an intelligent and robust operation tool for stratified laminar streams in microscale systems. In this unique design of the DC flow field-effect-transistor (DC-FFET), a pair of face-to-face external gate terminals are imposed with opposite gate-voltage polarities. Diffuse-charge dynamics induces heteropolar Debye screening charge within the diffuse double layer adjacent to the face-to-face oppositely-polarized gates, respectively. A background electric field is applied across the source-drain terminal and forces the face-to-face counterionic charge of reversed polarities into induced-charge electroosmotic (ICEO) vortex flow in the lateral direction. The chaotic turbulence of the transverse ICEO whirlpool interacts actively with the conventional plug flow of DCEO, giving rise to twisted streamlines for simultaneous DCEO pumping and ICEO mixing of fluid samples along the channel length direction. A mathematical model in thin-layer approximation and the low-voltage limit is subsequently established to test the feasibility of the bipolar DC-FFET configuration in electrokinetic manipulation of fluids at the micrometer dimension. According to our simulation analysis, an integrated device design with two sets of side-by-side, but upside-down gate electrode pair exhibits outstanding performance in electroconvective pumping and mixing even without any externally-applied pressure difference. Moreover, a paradigm of a microdevice for fully electrokinetics-driven analyte treatment is established with an array of reversed bipolar gate-terminal pairs arranged on top of the dielectric membrane along the channel length direction, from which we can obtain almost a perfect liquid mixture by using a smaller magnitude of gate voltages for causing less detrimental effects at a small Dukhin number. Sustained by theoretical analysis, our physical demonstration on bipolar field-effect flow control for the microfluidic device of dual functionalities in simultaneous electroconvective pumping and mixing holds great potential in the development of fully-automated liquid-phase actuators in modern microfluidic systems. Full article

Tetrodotoxin (TTX) is a potent neurotoxin that acts specifically on voltage-gated sodium channels on excitable membranes of muscle and nerve tissues. The biosynthetic process for TTX is unclear, although marine bacteria are generally thought to be the primary producers. The marine flatworm Planocera multitentaculata is a known TTX-bearing organism, and is suspected to be a TTX supplier to pufferfish. In this study, flatworm specimens were collected from an intertidal zone in Hayama, Kanagawa, Japan, the TTX content of the flatworm was measured using liquid chromatography with tandem mass spectrometry (LC-MS/MS), and seasonal changes in TTX content were investigated. No significant difference in TTX concentration of the flatworm body was found between the spawning period and other periods. However, the TTX content in individual flatworms was significantly higher in the spawning period than at other times. The TTX content rose in association with an increase in the body weight of the flatworm. Full article