Search Results (127)

The sugarcane industry plays a crucial economic role worldwide, with sucrose and ethanol as its main products. However, its processing generates large volumes of by-products—such as bagasse, molasses, vinasse, and straw—that contain valuable components for biotechnological valorization. This review integrates approximately 100 original research articles published in JCR-indexed journals between 2015 and 2025, of which over 50% focus specifically on sugarcane-derived agroindustrial residues. The biotechnological approaches discussed include submerged fermentation, solid-state fermentation, enzymatic biocatalysis, and anaerobic digestion, highlighting their potential for the production of biofuels, enzymes, and high-value bioproducts. In addition to identifying current advances, this review addresses key technical challenges such as (i) the need for efficient pretreatment to release fermentable sugars from lignocellulosic biomass; (ii) the compositional variability of by-products like vinasse and molasses; (iii) the generation of metabolic inhibitors—such as furfural and hydroxymethylfurfural—during thermochemical processes; and (iv) the high costs related to inputs like hydrolytic enzymes. Special attention is given to detoxification strategies for inhibitory compounds and to the integration of multifunctional processes to improve overall system efficiency. The final section outlines emerging trends (2024–2025) such as the use of CRISPR-engineered microbial consortia, advanced pretreatments, and immobilization systems to enhance the productivity and sustainability of bioprocesses. In conclusion, the valorization of sugarcane by-products through biotechnology not only contributes to waste reduction but also supports circular economy principles and the development of sustainable production models. Full article

This study explored the potential of reusing eggshell powders as a renewable activating agent for producing porous carbon materials from coffee husk. Carbonization and activation experiments were conducted by heating the samples at a rate of 10 °C/min up to 850 °C under a nitrogen atmosphere. A custom-designed double steel-mesh sample holder was used to hold approximately 2.0 g coffee husk on the top, with varying masses of eggshell at the bottom to achieve eggshells to coffee husk mass ratios of 2:1, 4:1, 6:1 and 8:1. The results demonstrated that CO₂ released from the thermal decomposition of the eggshell powder significantly enhanced pore development at 850 °C. Compared to the pore properties of carbon material produced without eggshell (e.g., BET surface area of 321 m²/g), the activated carbon samples exhibited substantially improved pore properties (e.g., BET surface area in the range of 592 to 715 m²/g). Furthermore, the pore characteristics improved consistently with increasing eggshell content. Observations by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and Fourier-transform infrared spectroscopy (FTIR) confirmed the structural and chemical transformations of the resulting carbon materials. Under optimal carbonization-activation conditions, the resulting carbon materials derived from coffee husk exhibited microporous structures and slit-shaped pores, as indicated by the Type I isotherms and H4 hysteresis loops. Full article

Lignin, the most abundant renewable aromatic biopolymer on Earth, is rapidly emerging as a powerful enabler of next-generation sustainable technologies. This review shifts the focus to the latest industrial breakthroughs that exploit lignin’s multifunctional properties across energy, agriculture, healthcare, and environmental sectors. Lignin-derived carbon materials are offering scalable, low-cost alternatives to critical raw materials in batteries and supercapacitors. In agriculture, lignin-based biostimulants and controlled-release fertilizers support resilient, low-impact food systems. Cosmetic and pharmaceutical industries are leveraging lignin’s antioxidant, UV-protective, and antimicrobial properties to create bio-based, clean-label products. In water purification, lignin-based adsorbents are enabling efficient and biodegradable solutions for persistent pollutants. These technological leaps are not merely incremental, they represent a paradigm shift toward a materials economy powered by renewable carbon. Backed by global sustainability roadmaps like the European Green Deal and China’s 14th Five-Year Plan, lignin is moving from industrial residue to strategic asset, driven by unprecedented investment and cross-sector collaboration. Breakthroughs in lignin upgrading, smart formulation, and application-driven design are dismantling long-standing barriers to scale, performance, and standardization. As showcased in this review, lignin is no longer just a promising biopolymer, it is a catalytic force accelerating the global transition toward circularity, climate resilience, and green industrial transformation. The future of sustainable innovation is lignin-enabled. Full article

Cacao is a food of global interest. Currently, the industry primarily utilizes the seed, which represents between 21% and 23% of the total fruit weight. In 2023, global production reached 5.6 million tons of fermented dry cacao beans, while approximately 25.45 million tons corresponded to cacao residues. The objective of this review was to compile and analyze alternatives for the utilization of cacao by-products. The methodology involved technological surveillance conducted in specialized databases between 2015 and 2025. Metadata were analyzed using VOSviewer software version 1.6.20. Priority was given to the most recent publications in high-impact indexed journals. Additionally, 284 patent documents were identified, from which 15 were selected for in-depth analysis. The reviewed articles and patents revealed a wide range of industrial applications for cacao by-products. Technologies including ultrasonic and microwave-assisted extraction, phenolic microencapsulation, cellulose nanocrystal isolation and targeted microbial fermentations maximize the recovery of polyphenols and antioxidants, optimize the production of high-value bioproducts such as citric acid and ethanol, and yield biodegradable precursors for packaging and bioplastics. The valorization of lignocellulosic by-products reduces pollutant discharge and waste management costs, enhances economic viability across the cacao value chain, and broadens functional applications in the food industry. Moreover, these integrated processes underpin circular economy frameworks by converting residues into feedstocks, thereby promoting sustainable development in producer communities and mitigating environmental impact. Collectively, they constitute a robust platform for the comprehensive utilization of cacao residues, fully aligned with bioeconomy objectives and responsible resource stewardship. Full article

Lignocellulosic biomass is a sustainable renewable resource for producing biopolymers, chemicals, and high-value compounds. This study proposes a biomass valorization concept that combines hydrodynamic cavitation (HC) and hydrothermal separation (HTS) to produce high-value products. Aspen Plus software was used in this study to develop the first simulation-driven integration of HC and HTS for biomass valorization in the biorefinery concept. The overall separation efficiency and component yield for standalone HC and HTS processes agreed with the experimental data. The findings from the simulation results indicate that the coupled processes yielded a significant enhancement in overall separation efficiency. This coupling resulted in a 24.5% increase compared to a single HC process and 16.75% higher efficiency than a single HTS process for sugarcane bagasse. The sensitivity analysis showed that incrementing HTS temperature and reaction time results in higher component yield and overall separation efficiency. The increase in the S/L ratio demonstrated a higher component yield in the process downstream, whereas the efficiency remained approximately the same. The effect of the HTS pressure was negligible on component yield and overall separation efficiency. Moreover, this study identified the optimal process parameters of the coupled process. At the optimal condition, quadratic models showed an overall separation efficiency of 79.41 ± 2.71% for the HC-HTS coupled process. This approach promises superior biomass utilization over traditional processes, minimizing waste and environmental impact while expanding the potential applications of biomass. Full article

Lignocellulose is an important renewable biomass resource. However, at present, there is a lack of efficient and environmentally friendly catalytic systems that can selectively convert lignocellulose components into high-value sugars, and the value realization of agricultural waste (such as straw) remains challenging. Carbon-based solid acids are used in the valorization of biomass due to their simple preparation and excellent catalytic performance. In this study, the magnetic carbon microspheres catalyst was prepared using concentrated sulfuric acid and hydroxyethyl sulfonic acid as sulfonating agents. Two sulfonation catalysts were applied to the hydrolysis of typical agricultural waste (rice straw). The performance of catalyst conversion to reducing sugar was compared, and the glucose yield was lower than 30%. The sulfonation catalyst of hydroxyethyl sulfonic acid obtained a higher yield of pentose (76.67%) than that of concentrated sulfuric acid (74.25%) in 110 min. The optimal reaction conditions were found: substrate was 0.04 g straw, catalyst was 0.04 g, H₂O/γ-valerolactone ratio was 8:2 in the solvent, and the reaction time was 110 min at 140 °C. Under these conditions, the sulfonation properties of hydroxyethyl sulfonic acid as a green sulfonating agent are similar to those of concentrated sulfuric acid. Its excellent catalytic performance is attributed to the medium B/L acid density ratio on the catalyst surface. In addition, the prepared catalyst can be effectively separated from the reaction residue in the catalytic system. This work provides a green catalytic system for the high-value utilization of agricultural waste from renewable carbon sources. Full article

Maize (Zea mays) is one of the most cultivated crops in South Africa, serving as a staple food, stock feed, and a key element in several industrial applications. It contributes significantly to the growth of the South African agricultural economy. The cultivation of maize generates a large amount of agricultural waste, mainly in the form of maize stover (MS), which encapsulates leaves, stalks, cobs, and husks. Approximately 5.15 metric tons (Mt) yr⁻¹ of MS are generated in South Africa. This corresponds to an energy potential of 94 PJ. There is immense potential to surpass the annual yield of MS by 126% up to about 11.66 Mt yr⁻¹ through practices such as zero tillage and improved agricultural production systems. MS may pose a serious threat to the environment if not managed in a sustainable and eco-friendly manner. Valorization of MS into biogas presents an excellent opportunity to effectively control biomass waste while contributing to renewable energy production and mitigating dependence on depleting fossil fuels. However, MS continues to be overlooked as a sustainable bioenergy resource due to its lignocellulosic structure. This study explores the potential of converting MS into biogas for heat and power generation, addressing both energy needs and waste management in South Africa. The purpose is to provide knowledge that will inform researchers, innovators, industrialists, policy makers, investors, and other key stakeholders interested in renewable energy systems. Collaborative efforts among multiple stakeholders are vital to leverage biogas as a technology to promote socio-economic development in South Africa. Full article

In this study, polyvinyl alcohol (PVA) films were reinforced with lignocellulosic nanofibers (LCNFs) extracted from bamboo shoot shells using a choline chloride-based deep eutectic solvent (DES). A filler loading of 10 wt% was identified as the optimal condition for enhancing film performance. To improve interfacial compatibility between the PVA matrix and LCNFs, three surface modification treatments were applied to the nanofibers: hydrochloric acid (HCl) hydrolysis, citric acid (CA) crosslinking, and a dual modification combining both methods (HCl&CA). Among all formulations, films incorporating dual-modified LCNF at 10 wt% loading exhibited the most significant improvements. Compared to neat PVA, these composites showed a 79.2% increase in tensile strength, a 15.1% increase in elongation at break, and a 33.1% enhancement in Young’s modulus. Additionally, thermal stability and barrier properties were improved, while water swelling and solubility were reduced. Specifically, the modified films achieved a thermal residue of 9.21% and the lowest degradation rate of 10.81%/min. Water vapor transmission rate and oxygen permeability decreased by 18.8% and 18.6%, respectively, and swelling and solubility dropped to 14.26% and 3.21%. These results highlight the synergistic effect of HCl hydrolysis and CA crosslinking in promoting uniform filler dispersion and strong interfacial adhesion, offering an effective approach to valorizing bamboo shoot shell waste into high-performance, eco-friendly packaging materials. Full article

Agricultural residues offer promising opportunities for the development of biocomposites. Durian husk, a lignocellulosic by-product abundantly available in Southeast Asia, and bamboo waste, an underutilized biomass resource, present considerable potential for sustainable particleboard production. This study focuses on developing single-layer bio-based particleboards using varying proportions of durian husk and bamboo waste bonded with urea formaldehyde resin. The fabricated boards were evaluated for thickness swelling, modulus of rupture, and internal bond strength according to relevant European standards. Results indicated that all particleboards met the Type P1 requirements for general-purpose use under dry conditions, as specified in BS EN 312:2010. The findings demonstrate the feasibility of converting agricultural waste into value-added, eco-friendly materials, supporting waste valorization, promoting circular economy practices, and contributing to the development of bio-based materials. Full article

This study explored mycelium-based composites (MBCs) as a sustainable alternative to conventional materials, focusing on the role of lignocellulosic substrates in optimizing their physical, mechanical, and biodegradability properties. It also addressed the valorization of agroforestry by-products, particularly European hazelnut shells (HZ) and radiata pine sawdust (SW), in an effort to reduce waste and minimize environmental impacts. The MBCs were obtained using two formulations (HZ100 and HZ75-SW25) of local agroforestry by-products bound together with natural growth of fungal mycelium from Ganoderma sp. We examined the physical and mechanical properties of these novel materials, including the density, shrinkage, water absorption, hydrophobicity, moduli of rupture and elasticity, and internal bond strength. Additionally, we assessed the biodegradability of the MBCs in soil to estimate the time required for complete degradation. The results clearly indicated differences in performance between the MBCs from HZ100 and HZ75-SW25. In general, HZ75-SW25 demonstrated superior mechanical performance compared to HZ100. Water absorption was low in both cases, suggesting a degree of hydrophobicity on the surface. The biodegradation results indicated that the fabricated MBCs could fully decompose in less than one year when buried in soil, confirming that these biocomposites are entirely biodegradable. Full article

This study investigates the potential of sugar beet pulp (SBP), a lignocellulosic by-product of sugar production, as a low-cost substrate for biohydrogen and biomass generation using Escherichia coli under dark fermentation conditions. Two strains—BW25113 wild-type and a genetically engineered septuple mutant—were employed. SBP was pretreated via thermochemical hydrolysis, and the effects of substrate concentration, dilution, and glycerol supplementation were evaluated. Hydrogen production was highly dependent on substrate dilution and nutrient balance. The septuple mutant achieved the highest H₂ yield in 30 g L⁻¹ SBP hydrolysate (0.75% sulfuric acid) at 5× dilution with glycerol, reaching 12.06 mmol H₂ (g sugar)⁻¹ and 0.28 mmol H₂ (g waste)⁻¹, while the wild type under the same conditions yielded 3.78 mmol H₂ (g sugar)⁻¹ and 0.25 mmol H₂ (g waste)⁻¹. In contrast, undiluted hydrolysates favored biomass accumulation over H₂ production, with the highest biomass yield (0.3 g CDW L⁻¹) obtained using the septuple mutant in 30 g L⁻¹ SBP hydrolysate without glycerol. These findings highlight the potential of genetically optimized E. coli and optimized hydrolysate conditions to enhance the valorization of agro-industrial waste, supporting future advances in sustainable hydrogen bioeconomy and integrated waste biorefineries. Full article

The efficient degradation of lignocellulose is essential for valorizing agricultural waste and reducing environmental pollution. An efficient degradation process requires an enzyme cocktail capable of comprehensively deconstructing lignocellulosic components. In this study, the secretome of Coriolopsis trogii Mafic-2001 induced by rice straw was examined, and the enzymatic composition and reaction conditions of Coriolopsis trogii were optimized. Mafic-2001 secreted an enzyme cocktail that included ligninolytic enzymes, cellulases, and hemicellulases. However, the relative abundances of endoglucanase (EG) and β-glucosidase (βG) were only 64.37% and 10.69%, respectively, compared with the relative abundance of cellobiohydrolase, which indicated a critical bottleneck in degradation efficiency. To overcome this limitation, the recombinant enzymes rEG1 and rβG1 were expressed in Pichia pastoris X-33. A functionally enhanced enzyme cocktail (rEG1–rβG1–Mafic-2001 = 0.05:0.09:0.86) was developed via a mixture design to achieve a reducing sugar yield of 2.77 mg/mL from Chinese distillers’ grains (CDGs). Structural analyses revealed that the optimized enzyme cocktail disrupted the reticulated fiber architecture of CDGs and attenuated the characteristic Fourier-transform infrared spectroscopy peaks of lignin, cellulose, and hemicellulose. This study elucidates the synergistic lignocellulose deconstruction mechanism of Mafic-2001 and establishes a precision enzyme-supplementation strategy for efficient CDG bioconversion, providing a scalable platform for the valorization of lignocellulosic biomass. Full article

A creative, nature-based way to solve environmental issues and promote sustainable development could be the cultivation of Pleurotus spp. mushrooms to use the lignocellulosic waste from Medicinal and Aromatic Plants (MAPs). Pleurotus species are characterized by flexibility and biodegradative capacities to generate bioactive compounds with antibacterial, antioxidant, and nutraceutical properties using lignocellulosic substrates. Aromatic plant residues, such as those from lavender, sage, and mint, can improve the resultant mushrooms’ metabolic profiles and act as nutrient-rich substrates. Higher levels of phenols, flavonoids, and terpenoids can be among these enhancements, which could make mushrooms useful as functional foods. This strategy could provide scalable and affordable waste management solutions by utilizing already existing agricultural systems, including mushroom cultivation, during slow times. Incorporating Pleurotus-based systems can help to produce renewable bio-based products, reduce pollution, and improve soil health. This study not only attempts to demonstrate how Pleurotus species may convert industrial and agricultural waste into valuable, bioactive products, reducing waste and promoting ecological remediation in a circular economy, but also to highlight the viability of using natural processes for economic and environmental sustainability. To exploit the potential of this nature-based approach, future research should concentrate on maximizing substrate consumption, scaling these solutions to industrial levels, and guaranteeing regulatory compliance. Full article

This study employs near-infrared spectroscopy (NIRS) combined with chemometrics to explore the feasibility and methodology for the rapid analysis of lignocellulosic content in straw. As the demand for biofuels and bioproducts increases, the efficient utilization of agricultural waste, such as straw, has become particularly important. Rapid analysis of lignocellulosic content helps improve the resource utilization efficiency of agricultural waste, providing significant support for biofuel production, agricultural waste valorization, and environmental protection. A total of 148 straw samples were used in this study, collected from Zhejiang, Jiangsu, and Heilongjiang provinces in China, covering rice straw (Oryza sativa L.), corn straw (Zea mays L.), wheat straw (Triticum aestivum L.), soybean straw (Glycine max L.), sorghum straw (Sorghum bicolor L.), rapeseed straw (Brassica napus L.), and peanut straw (Arachis hypogaea L.). After collection, the samples were first air-dried until surface moisture evaporated and then ground and sifted before being numbered and sealed for storage. To ensure the accuracy of the experimental results, all samples were subjected to a 6 h drying treatment at 60 °C before the experiment to ensure uniform moisture content. Partial least squares (PLS) and support vector machine (SVM) regression methods were employed for modeling analysis. The results showed that NIRS in combination with PLS modeling outperformed SVM in the calibration and prediction of lignocellulosic content. Specifically, the cellulose PLS model achieved a prediction set coefficient of determination (R²_P) of 0.8983, root mean square error of prediction (RMSEP) of 0.6299, and residual predictive deviation (RPD) of 3.49. The hemicellulose PLS model had an R²_P of 0.7639, RMSEP of 1.5800, and RPD of 2.11, while the lignin PLS model achieved an R²_P of 0.7635, RMSEP of 0.6193, and RPD of 2.17. The results suggest that NIRS methods have broad prospects in the analysis of agricultural waste, particularly in applications related to biofuel production and the valorization of agricultural by-products. Full article

This study reveals how microbial diversity relates to soil properties in Auricularia heimuer residue–chicken manure composting, presenting sustainable waste recycling solutions. These microbial-straw strategies are adaptable to various agroecological regions, offering flexible residue valorization approaches for local conditions, crops, and resources. This study examined the effects of composting Auricularia heimuer residue and chicken manure at three ratios (6:4, 7:3, 8:2) on soil properties, lignocellulose content, enzyme activity, microbial diversity, and maize growth. The compost was mixed into potting soil at different proportions (0:10 to 10:0). During composting, the temperature remained above 50 °C for more than 14 days, meeting safety and sanitation requirements. The composting process resulted in a pH range of 7–8, a stable moisture content of 60%, a color change from brown to gray-brown, the elimination of unpleasant odors, and the formation of loose aggregates. Lignocellulose content steadily decreased, while lignocellulosic enzyme activity and actinomycete abundance increased, indicating suitability for field application. Compared with the control (CK), total nitrogen, total phosphorus, and total potassium in the soil increased by 57.81–77.91%, 4.5–19.28%, and 301.09–577.2%, respectively. Lignin, cellulose, and hemicellulose increased 50.6–83.49%, 59.6–340.33%, and 150.86–310.5%, respectively. The activities of lignin peroxidase, cellulase, and hemicellulase increased by 9.05–36.31%, 6.7–36.66%, and 37.39–52.16%, respectively. Maize root weight, plant biomass, and root number increased by 120.87–138.59%, 117.83–152.86%, and 29.03–75.81%, respectively. In addition, composting increased the relative abundance of actinomycetes while decreasing the abundance of ascomycetes and ascomycetes. The relative abundance of Sphingomonas and Gemmatimonas increased, whereas pathogenic fungi such as Cladosporium and Fusarium decreased. Compost application also enhanced bacterial and fungal diversity, with bacterial diversity indices ranging from 6.744 to 9.491 (B1), 5.122 to 9.420 (B2), 8.221 to 9.552 (B3), and 6.970 to 9.273 (CK). Fungal diversity indices ranged from 4.811 to 8.583 (B1), 1.964 to 9.160 (B2), 5.170 to 9.022 (B3), and 5.893 to 7.583 (CK). Correlation analysis of soil physicochemical properties, lignocellulose content, enzymes, microbial community composition, and diversity revealed that total nitrogen, total phosphorus, total potassium, and lignocellulose content were the primary drivers of rhizosphere microbial community dynamics. These factors exhibited significant correlations with the dominant bacterial and fungal taxa. Additionally, bacterial and fungal diversity increased with the incorporation of Auricularia heimuer residue. In conclusion, this study elucidates the relationships between microbial diversity and soil properties across different proportions of Auricularia heimuer residue and chicken manure composting, offering alternative strategies for waste recycling and sustainable agricultural development. At present, the production of biobiotics using waste culture microorganisms is still in the laboratory research stage, and no expanded experiments have been carried out. Therefore, how to apply waste bacterial bran to the production of biocontrol biotics on a large scale needs further research. Full article