Search Results (685)

The energy generated from renewable sources has an intermittent nature since solar irradiation and wind speed vary continuously. Hence, their energy should be stored to be utilized throughout their shortage. There are various forms of energy storage systems while the most widespread technique is the battery storage system since its cost is low compared to other techniques. Therefore, batteries are employed in several applications like power systems, electric vehicles, and smart grids. Due to the merits of the lithium-ion (Li-ion) battery, it is preferred over other kinds of batteries. However, the accuracy of the Li-ion battery model is essential for estimating the state of charge (SOC). Additionally, it is essential for consistent simulation and operation throughout various loading and charging conditions. Consequently, the determination of real battery model parameters is vital. An innovative application of the red-billed blue magpie optimizer (RBMO) for determining the model parameters and the SOC of the Li-ion battery is presented in this article. The Shepherd model parameters are determined using the suggested optimization algorithm. The RBMO-based modeling approach offers excellent execution in determining the parameters of the battery model. The suggested approach is compared to other programmed algorithms, namely dandelion optimizer, spider wasp optimizer, barnacles mating optimizer, and interior search algorithm. Moreover, the suggested RBMO is statistically evaluated using Kruskal–Wallis, ANOVA tables, Friedman rank, and Wilcoxon rank tests. Additionally, the Li-ion battery model estimated via the RBMO is validated under variable loading conditions. The fetched results revealed that the suggested approach achieved the least errors between the measured and estimated voltages compared to other approaches in two studied cases with values of 1.4951 × 10⁻⁴ and 2.66176 × 10⁻⁴. Full article

Power distribution systems are witnessing a growing deployment of distributed, inverter-based renewable resources such as solar generation. This poses certain challenges such as rapid voltage fluctuations due to the intermittent nature of renewables. Volt-Var control (VVC) methods have been proposed to utilize the ability of inverters to supply or consume reactive power to mitigate fast voltage fluctuations. These methods usually require a detailed power network model including topology and impedance data. However, network models may be difficult to obtain. Thus, it is desirable to develop a model-free method that obviates the need for the network model. This paper proposes a novel model-free cooperative control method to perform voltage regulation and reduce inverter aging in power distribution systems. This method assumes the existence of time-series voltage and load data, from which the relationship between voltage and nodal power injection is derived using a feedforward artificial neural network (ANN). The node voltage sensitivity versus reactive power injection can then be calculated, based on which a cooperative control approach is proposed for mitigating voltage fluctuation. The results obtained for a modified IEEE 13-bus system using the proposed method have shown its effectiveness in mitigating fast voltage variation due to PV intermittency. Moreover, a comparative analysis between model-free and model-based methods is provided to demonstrate the feasibility of the proposed method. Full article

Energy storage technology is crucial for addressing the intermittency of renewable energy sources and plays a key role in power systems and electronic devices. In the field of energy storage systems, multivalent vanadium-based oxides have attracted widespread attention. Among these, vanadium dioxide (VO₂) is distinguished by its key advantages, including high theoretical capacity, low cost, and strong structural designability. The diverse crystalline structures and plentiful natural reserves of VO₂ offer a favorable foundation for facilitating charge transfer and regulating storage behavior during energy storage processes. This mini review provides an overview of the latest progress in VO₂-based materials for energy storage applications, specifically highlighting their roles in lithium-ion batteries, zinc-ion batteries, photoassisted batteries, and supercapacitors. Particular attention is given to their electrochemical properties, structural integrity, and prospects for development. Additionally, it explores future development directions to offer theoretical insights and strategic guidance for ongoing research and industrial application of VO₂. Full article

Island electrical networks often face stability and resilience issues due to their weakly meshed structure, which lowers system inertia and compromises supply continuity. This challenge is further intensified by the increasing integration of renewable energy sources, promoted by decarbonization goals, whose intermittent and variable nature complicates grid stability management. To address this, Red Eléctrica de España—the transmission system operator of Spain—has planned several improvements in the Canary Islands, including the installation of new wind farms and a second transmission circuit on the island of La Palma. This new infrastructure will complement the existing one and ensure system stability in the event of N-1 contingencies. This article evaluates the stability of the island’s electrical network through dynamic simulations conducted in PSS^®E, analyzing four distinct fault scenarios across three different grid configurations (current, short-term upgrade and long-term upgrade with wind integration). Generator models are based on standard dynamic parameters (WECC) and calibrated load factors using real data from the day of peak demand in 2021. Results confirm that the planned developments ensure stable system operation under severe contingencies, while the integration of wind power leads to a 33% reduction in diesel generation, contributing to improved environmental and operational performance. Full article

Phosphorus (P) is a problematic waterborne pollutant, and considerable efforts have been taken to monitor its presence and transport in locales struggling with eutrophication. Most historical P datasets consist of intermittent grab samples, necessitating the construction of surrogacy models to explore P at high resolutions. In Iowa, models using historical data to relate turbidity to particulate P (PartP) have successfully been created. However, it is unknown how comprehensively historical datasets reflect Iowa’s hydrologic conditions and how well these models perform during flows not well represented within the existing data. In this study, we analyzed historical P datasets from 16 major Iowa rivers to determine how well they captured the rivers’ full range of streamflow conditions. While these datasets contained sufficient samples during low and average flows, they typically under-sampled high flows—containing few values above the 85–95th percentiles. Therefore, we collected new data in each river during wet conditions, with ~300 samples taken from 2021 to 2024. These new sampling results largely aligned with the existing surrogacy models and slightly improved model performance, suggesting that utilizing turbidity to predict PartP is appropriate in nearly all streamflow conditions. These findings may prove consequential for robustly modeling PartP due to its dynamic nature and disproportionately high transport during wet weather events. Full article

This study investigates the dynamic response mechanisms of discharge capacity in the Han River Estuary to hydrological process changes at the Yangtze–Han River confluence. By constructing a one-dimensional hydrodynamic model for the 265 km Xinglong–Hankou reach, we quantitatively decouple the synergistic effects of riverbed scouring (mean annual incision rate: 0.12 m) and Three Gorges Dam (TGD) operation through four orthogonal scenarios. Key findings reveal: (1) Riverbed incision dominates discharge variation (annual mean contribution >84%), enhancing flood conveyance efficiency with a peak flow increase of 21.3 m³/s during July–September; (2) TGD regulation exhibits spatiotemporal intermittency, contributing 25–36% during impoundment periods (September–October) by reducing Yangtze backwater effects; (3) Nonlinear interactions between drivers reconfigure flow paths—antagonism occurs at low confluence ratios (R < 0.15, e.g., Cd increases to 45 under TGD but decreases to 8 under incision), while synergy at high ratios (R > 0.25) reduces Hanchuan Station flow by 13.84 m³/s; (4) The 180–265 km confluence-proximal zone is identified as a sensitive area, where coupled drivers amplify water surface gradients to −1.41 × 10⁻³ m/km (2.3× upstream) and velocity increments to 0.0027 m/s. The proposed “Natural/Anthropogenic Dual-Stressor Framework” elucidates estuary discharge mechanisms under intensive human interference, providing critical insights for flood control and trans-basin water resource management in tide-free estuaries globally. Full article

Masting, or the synchronous and intermittent production of seeds, can have profound consequences for Tropical Montane Cloud Forest (TMCF) tree populations and the trophic webs that depend on their mass flowering and seeds. Over the past 80 years, the importance of Fagus mexicana Martínez (Mexican beech) masting has become apparent in terms of conservation and management, promoting regeneration, and conserving endangered tree species, as well as the conscientious development of edible beechnuts as a non-timber forest product. The establishment of the relict-endemic Mexican beech is unknown, and several microenvironmental factors could influence natural regeneration. Thus, this study was conducted in two well-preserved Mexican beech forests to assess the influence of light incidence and soil moisture on the natural germination and seedling establishment of beeches. During two masting years (2017 and 2024), we assessed in situ beechnut germination and establishment. We tested the effect of the microenvironment of the oldest beeches on beechnut germination and seedling establishment. Our study highlights the complexity of the microenvironment of old beeches influencing the early stages of establishment and provides insights into possible conservation actions aimed at mitigating the impact of environmental change and humans. Full article

Atrial fibrillation (AF) is a common cardiac arrhythmia linked to an increased risk of stroke, heart failure, and mortality, yet its diagnosis remains challenging due to its intermittent and often asymptomatic nature. Traditional methods, such as standard electrocardiography (ECG) and prolonged cardiac monitoring, have limitations in terms of cost, accessibility, and diagnostic yield. Artificial intelligence (AI), particularly machine learning (ML) and deep learning, has emerged as a promising tool for AF detection and prediction by analyzing ECG data with high accuracy. AI models can identify subtle patterns in ECG signals that may indicate AF, even when the arrhythmia is not actively present, improving early diagnosis and risk stratification. Additionally, AI-powered ECG analysis has been integrated into wearable and mobile health devices, expanding screening capabilities beyond clinical settings. While studies have demonstrated AI’s effectiveness, challenges such as data bias, model reliability across diverse populations, and regulatory considerations must be addressed before widespread clinical adoption. If these obstacles are overcome, AI has the potential to revolutionize AF management by enabling earlier detection, reducing the need for resource-intensive monitoring, and improving patient outcomes. Full article

Photovoltaic panels are pivotal in transforming solar irradiance into electricity, making them a key technology in renewable energy. Despite their potential, the distribution of photovoltaic systems in Romania remains sparse, requiring advanced data analytics for effective management, particularly in addressing the intermittent nature of photovoltaic energy. This study investigates the predictive capabilities of Long Short-Term Memory (LSTM) and Convolutional Neural Network (CNN) architectures for forecasting hourly photovoltaic energy production in Romania. The results indicate that CNN models significantly outperform LSTM models, with 77% of CNNs achieving an R² of 0.9 or higher compared to only 13% for LSTMs. The best-performing CNN model reached an R² of 0.9913 with a mean absolute error (MAE) of 9.74, while the top LSTM model achieved an R² of 0.9880 and an MAE of 12.57. The rapid convergence of the CNN model to stable error rates illustrates its superior generalization capabilities. Moreover, the model’s ability to accurately predict photovoltaic production over a two-day timeframe, which is not included in the testing dataset, confirms its robustness. This research highlights the critical role of accurate energy forecasting in optimizing the integration of photovoltaic energy into Romania’s power grid, thereby supporting sustainable energy management strategies in line with the European Union’s climate goals. Through this methodology, we aim to enhance the operational safety and efficiency of photovoltaic systems, facilitating their large-scale adoption and ultimately contributing to the fight against climate change. Full article

This study examines the causes and implications of the unprecedented electricity consumption observed in Croatia during an intense heatwave in July 2024. On the evening of 17 July 2024, power demand reached an all-time high of 3381 MW, significantly surpassing the average demand of around 2000 MW. More concerningly, during these peak hours, 35% of the electricity had to be imported due to insufficient domestic generation capacity. As a result, average monthly electricity prices for July and August 2024 exceeded 250 EUR/MWh in the evening hours. Looking ahead, Croatia and Southern Europe are expected to face increasingly hotter summers, pushing power systems to accommodate even higher peak loads. As the energy transition progresses toward a greater reliance on intermittent renewable energy, enhancing power grid flexibility will become essential. Flexible power generation will play a critical role in bridging gaps in renewable energy output. Solutions such as pumped hydro storage and battery systems can store excess renewable energy and release it during peak demand periods. Additionally, demand response strategies—encouraging the shift of electricity usage to times of higher wind and solar availability—offer another effective way to adapt to the intermittent nature of renewable energy sources. Full article

The ambitious goals of decarbonization of the European economy by mid-century pose significant challenges, especially when relying heavily on resources whose nature is inherently intermittent, specifically wind and solar energy. The situation is even more serious in isolated regions with limited connections to larger power grids. Using EnergyPLAN software, three scenarios for 2023 were modeled: a diesel-only system, the current hybrid renewable system, and an optimized scenario. This paper evaluates the performance of the usual generation system existing in isolated systems, based on fossil fuels, and proposes an optimized system considering both the cost of the system and the penalties for emissions. All this is applied to the case study of the island of El Hierro, but the findings are applicable to any location with similar characteristics. This system is projected to reduce emissions by over 75% and cut costs by one-third compared to the current configuration. A system has been proposed that preserves the economic viability and reliability of diesel-based systems while achieving low emission levels. This is accomplished primarily through the use of renewable energy generation, supported by pumped hydro storage. The approach is specifically designed for remote regions with small isolated grids, where reliability is critical. Importantly, the system relies on appropriately sized renewable installations, avoiding oversizing, which—although it could further reduce emissions—would lead to significant energy surpluses and require even more efficient storage solutions. This emphasizes the importance of implementing high emission penalties as a key policy measure to phase out fossil fuel generation. Full article

As a crucial natural gas production base in China, the Jingbian Gas Field has gradually entered its mid-to-late development stage with prolonged exploitation. The increasing number of intermittent production wells and reliance on empirical settings for single-well opening/shut-in durations have resulted in low production efficiency and high energy consumption. Concurrently, concentrated intermittent production across multiple wells frequently triggers severe pressure fluctuations in the pipeline network, jeopardizing overall field production stability. Achieving cost reduction and improved efficiency through single-well intermittent production optimization and staggered production scheduling for multi-well systems has become a critical challenge in this late-development phase. The absence of flow meters in most Jingbian wells introduces substantial difficulties in adjusting both single-well operating durations and multi-well staggered production schedules. This study first introduces a novel coefficient D inspired by the load factor concept, proposing a methodology to adjust opening/shut-in durations using only tubing pressure, casing pressure, and pipeline delivery pressure. Second, a dynamic workflow is developed for staggered multi-well production scheduling to mitigate pressure surges caused by simultaneous well restarts. Field applications demonstrate that optimized single-well operations achieved steady efficiency improvements, with the average tubing–casing pressure differential in severe liquid-loading wells decreasing by 80% post-adjustment. The staggered multi-well scheduling ensures that no two or more wells (n > 1) restart simultaneously, significantly enhancing the stability of the gas transmission network. These findings provide theoretical and technical guidance for the efficient development of similar low-pressure gas fields. Full article

Continuous growth in energy demand is observed throughout the world, with simultaneous rapid consumption of fossil fuels. New effective technologies and systems are needed that allow for a significant increase in the use of renewable energy sources, such as the sun, wind, biomass, and sea tides. Currently, one of the main research challenges refers to thermal energy management, taking into account the discontinuity and intermittency of both energy supply and demand. Phase change materials (PCMs) are a useful solution in the design and manufacturing of multifunctional materials for energy storage technologies such as solar cells and photovoltaic systems. In order to design efficient PCM-based systems for energy applications, ideas and behaviors from nature should be taken account as it has created over millions of years a plethora of unique structures and morphologies in complex hierarchical materials. Inspirations for nature have been applied to improve and adjust the properties of materials for energy conversion and storage as well as in the design of advanced energy systems. Therefore, this review presents recent developments in biomimetic and bio-inspired multifunctional phase change materials for the energy storage and conversion of different types of renewable energy to thermal or electrical energy. Future outlooks are also provided to initiate integrated interdisciplinary bio-inspired efforts in the field of modern sustainable PCM technologies. Full article

Traditional farming practices are becoming increasingly inadequate to meet global food demand due to water scarcity, prolonged production cycles, climate variability, and declining arable land. In contrast, aeroponic, smart, soil-free farming technologies offer a more sustainable alternative by reducing land use and providing efficient water use, given that aeroponics intermittently delivers water in mist form rather than maintaining continuous root zone moisture. However, aeroponics faces critical challenges in irrigation management due to non-standardized structures and limited real-time control. A key limitation is the inability to dynamically respond to temperature (T), relative humidity (RH), light intensity (L_i), electrical conductivity (EC), pH, and photosynthesis rate (P_n), resulting in suboptimal crop yields and resource wastage. Despite growing interest, there remains a research gap in integrating internet of things (IoT) and machine learning technologies into aeroponic systems for adaptive control. IoT-enabled sensors provide real-time data on ambient conditions and plant health, while ML models can adaptively optimize misting intervals based on the fluctuations in P_n and environmental inputs. These technologies are particularly well suited to address the dynamic, data-intensive nature of aeroponic environments. This review purposes a novel, standardized IoT–ML framework to control irrigation by emphasizing IoT sensing and ML-based decision making in aeroponics. This integrated approach is essential for minimizing water loss, enhancing resource efficiency, and advancing the sustainability of controlled-environment agriculture. Full article

Electric vehicles (EVs) have introduced new operational challenges for distribution network service providers (DNSPs), particularly for voltage regulation due to unpredictable charging behaviour and the intermittent nature of distributed energy resources (DERs). This study focuses on formulating an empirical EV load model that characterises charging behaviour over a broad spectrum of supply voltage magnitudes to enable more accurate representation of EV demand under varying grid conditions. The empirical model is informed by laboratory evaluation of one Level 1 and two Level 2 chargers, along with five EV models. The testing revealed that all the chargers operated in a constant current (CC) mode across the applied voltage range, except for certain Level 2 chargers, which transitioned to constant power (CP) operation at voltages above 230 V. A model of a typical low voltage network has been developed using the OpenDSS software package (version 10.2.0.1) to evaluate the performance of the proposed empirical load model against traditional CP load modelling. In addition, a 24 h case study is presented to provide insights into the practical implications of increasing EV charging load. The results demonstrate that the CP model consistently overestimated network demand and voltage drops and failed to capture the voltage-dependent behaviour of EV charging in response to source voltage change. In contrast, the empirical model provided a more realistic reflection of network response, offering DNSPs improved accuracy for system planning. Full article