Search Results (192)

Remediating complex-contaminated soils demands the synergistic optimization of efficiency, cost-effectiveness, and carbon emission reduction. Currently, ultra-high-temperature thermal desorption technology is mature in terms of principle and laboratory-scale performance; however, ongoing efforts are focusing on achieving stable, efficient, controllable, and cost-optimized operation in large-scale engineering applications. To address this gap, this study aimed to (1) verify the energy efficiency and economic benefits of removing over 98% of target pollutants at a 7.5 × 10⁴ m³ contaminated site and (2) elucidate the mechanisms underlying parallel scale–technology dual-factor cost reduction and energy–carbon–cost optimization, thereby accumulating case experience and data support for large-scale engineering deployment. To achieve these objectives, a “thermal stability–chemical oxidizability” classification criterion was developed to guide a parallel remediation strategy, integrating ex situ ultra-high-temperature thermal desorption (1000 °C) with persulfate-based chemical oxidation. This strategy was implemented at a 7.5 × 10⁴ m³ large-scale site, delivering robust performance: the total petroleum hydrocarbon (TPH) and pentachlorophenol (PCP) removal efficiencies exceeded 99%, with a median removal rate of 98% for polycyclic aromatic hydrocarbons (PAHs). It also provided a critical operational example of a large-scale engineering application, demonstrating a daily treatment capacity of 987 m³, a unit remediation cost of 800 CNY·m⁻³, and energy consumption of 820 kWh·m⁻³, outperforming established benchmarks reported in the literature. A net reduction of 2.9 kilotonnes of CO₂ equivalent (kt CO₂e) in greenhouse gas emissions was achieved, which could be further enhanced with an additional 8.8 kt CO₂e by integrating a hybrid renewable energy system (70% photovoltaic–molten salt thermal storage + 30% green power). In summary, this study establishes a “high-temperature–parallel oxidation–low-carbon energy” framework for the rapid remediation of large-scale multi-contaminant sites, proposes a feasible pathway toward developing a soil carbon credit mechanism, and fills a critical gap between laboratory-scale success and large-scale engineering applications of ultra-high-temperature remediation technologies. Full article

Concentrated Solar Power (CSP) technology offers significant potential for stable and dispatchable renewable electricity generation through integration with thermal energy storage. However, adoption remains limited due to high capital costs, technical complexity, and market competition from photovoltaic (PV) systems. This review systematically synthesises recent literature on CSP and applies a hybrid SWOT–Analytic Hierarchy Process (AHP) methodology to quantitatively evaluate key internal and external factors influencing CSP deployment. The analysis identifies major strengths such as high-capacity factors and grid stability enabled by thermal storage, as well as weaknesses including high initial investment and site requirements. Opportunities stem from technological innovation, supportive policy frameworks, and potential for local job creation, while threats include rapid cost reductions in PV systems, water scarcity, and market and regulatory uncertainties. The integrated SWOT–AHP approach provides a robust decision-making framework and strategic insights for stakeholders seeking to promote CSP technology in diverse market contexts. The findings underscore the importance of tailored policy support and targeted investment to overcome barriers and realise CSP’s full potential within the renewable energy landscape. Full article

Increase in temperatures significantly reduce photovoltaic (PV) panel efficiency by increasing thermalization losses and carrier recombination. To mitigate this issue, phase change material (PCM-RT35) is integrated with the PV system. This study investigates the thermal performance of a PV–PCM hybrid system under the summer climatic conditions of Islamabad, Pakistan. A transient computational model was developed in ANSYS Fluent 2021 R1 and validated against published experimental data, showing an accuracy within 5% for panel temperature. Monthly average hourly heat flux and ambient temperature profiles were used as boundary conditions in three separate simulations. The results show that, although all three months reach a 100% melt fraction, only April achieves complete solidification within a 24-h cycle. In May solidification merely begins before the end of the period, and in June no solidification occurs at all. Importantly, integrating the PCM lowers the PV module’s peak temperature by up to 15 °C and boosts its power-output efficiency by about 6%. By keeping the module cooler, its electrical efficiency is therefore significantly improved. Full article

The hybridization of photovoltaic (PV) and concentrated solar power (CSP) technologies offers a viable solution to enhance dispatchability and reduce energy costs in solar power systems. This study analyzes two CSP-PV hybrid configurations—parabolic trough and solar tower—in diverse Brazilian climatic conditions. Particular focus is given to Bom Jesus da Lapa, identified as the most favorable location in terms of solar resource and system performance. The CSP subsystem includes a two-tank direct thermal energy storage system with molten nitrate salts and a 50 MWe gross Rankine cycle. System performance and techno-economic metrics are assessed using the System Advisor Model (SAM). A parametric analysis investigates the impact of solar irradiation, solar multiple (SM), and thermal storage duration on annual energy output and levelized cost of energy (LCOE). Results indicate that the hybrid system consistently surpasses standalone PV and CSP in both performance and cost-effectiveness. In the solar tower configuration, capacity factors reach up to 90% with an SM of 3.5 and 12 h of storage. This work provides the first techno-economic assessment of PV/CSP hybrid plants tailored to Brazilian conditions, combining multi-city simulations with solar multiple and storage parametric analysis. Among all evaluated sites, Bom Jesus da Lapa presents the highest energy yield and lowest LCOE, supporting its potential suitability for hybrid CSP-PV deployment. Full article

Photovoltaic-thermal (PVT) solar collector technologies are considered a highly efficient solution for sustainable energy generation, capable of producing electricity and heat simultaneously. This paper reviews and discusses different aspects of PVT collectors, including fundamental principles, materials, diverse classifications, such as air-type and water-type, and different cooling mechanisms to boost their performance, such as nano-fluids, Phase Change Materials (PCMs), and Thermoelectric Generators (TEGs). At the system level, this paper analyses PVT technologies’ integration in buildings and industrial applications and gives a comprehensive market overview. The methodology focused on evaluating advancements in design, thermal management, and overall system efficiency based on existing literature published from 2010 to 2025. From the findings of various studies, water-based PVT systems provide electrical efficiencies ranging from 8% to 22% and thermal efficiencies between 30% and 70%, which are almost always higher than air-based alternatives. Innovations, including nanofluids, phase change materials, and hybrid topologies, have improved energy conversion and storage. Market data indicates growing adoption in Europe and Asia, stressing significant investments led by Sunmaxx, Abora Solar, Naked Energy, and DualSun. Nonetheless, obstacles to PVT arise regarding aspects such as cost, design complexity, lack of awareness, and economic incentives. According to the findings of this study, additional research is required to reduce the operational expenses of such systems, improve system integration, and build supportive policy frameworks. This paper offers guidance on PVT technologies and how they can be integrated into different setups based on current normativity and regulatory frameworks. Full article

The global transition to renewable energy requires hybrid solutions that address variability while delivering tangible co-benefits and verifiable mitigation outcomes. This study evaluates a novel small hydropower–photovoltaic (SHP–PV) hybrid system in the Kyrgyz Republic that integrates flexible Bitcoin mining loads and waste-heat recovery for greenhouse heating. A techno-economic model was developed for a 10 MW configuration, allocating annual net generation of 57.34 GWh between grid export and on-site mining through a single decision parameter. Mitigation accounting applies a combined margin grid factor of 0.4–0.7 tCO₂/MWh for exported electricity and a diesel factor of 0.26–0.27 tCO₂/MWh_fuel for heat displacement, yielding Article 6–eligible reductions from both electricity and recovered heat. Waste-heat recovery from mining supplies ≈15 MWh_th/year to a 50 m² greenhouse, displacing diesel use and demonstrating visible sustainable development co-benefits. Economic analysis reproduces annual revenues of ≈$1.9 million, with a levelized cost of electricity of $48/MWh and an indicative IRR of ~6%, consistent with positive but modest returns under merchant operation and uplift potential under mixed allocations. This study concludes that componentized accounting—exported electricity credited under grid displacement and diesel displacement credited from recovered heat—ensures Article 6 integrity and positions SHP–PV hybrids as replicable, multi-service renewable models for Central Asia. Unlike prior hybrid studies that treat generation, economics, and mitigation separately, our framework integrates allocation (α), financial outcomes, and Article 6 carbon accounting within a unified structure, while explicitly modeling Bitcoin mining as an endogenous flexible load with thermal recovery—advancing methodological approaches for multi-service renewable systems in climate policy contexts. Full article

This study proposes a hybrid method that combines a Genetic Algorithm (GA) with Digital Twin (DT) technology to address nighttime reactive power backfeed in large-scale photovoltaic (PV) power plants. First, the GA is employed to optimize the location and number of multitask inverters to minimize line losses and eliminate the reactive power backfeed. Subsequently, the DT continuously monitored the grid conditions and performed rolling dispatch to mitigate the residual reactive power caused by nighttime voltage fluctuations. Simulation results show that GA-based optimization reduces line losses from 0.346 to 0.2818 kW (18.6% reduction) and helps alleviate inverter thermal stress. When integrated with DTs, the method further improves voltage stability and demonstrates a strong adaptive control capability. The proposed GA–DT strategy can also be regarded as a potential AIoT application in PV plants, with the potential to reduce operational and maintenance costs and enhance the system reliability in the future. Full article

This study presents the design and techno-economic optimization of a hybrid renewable energy system (HRES) for a coastal hotel in Manavgat, Türkiye. The system integrates photovoltaic (PV) panels, wind turbines (WT), pumped hydro storage (PHS), hydrogen storage (electrolyzer, tank, and fuel cell), batteries, a fuel cell-based combined heat and power (CHP) unit, and a boiler to meet both electrical and thermal demands. Within this broader optimization framework, six optimal configurations emerged, representing grid-connected and standalone operation modes. Optimization was performed in HOMER Pro to minimize net present cost (NPC) under strict reliability (0% unmet load) and renewable energy fraction (REF > 75%) constraints. The grid-connected PHS–PV–WT configuration achieved the lowest NPC ($1.33 million) and COE ($0.153/kWh), with a renewable fraction of ~96% and limited excess generation (~21%). Off-grid PHS-based and PHS–hydrogen configurations showed competitive performance with slightly higher costs. Hydrogen integration additionally provides complementary storage pathways, coordinated operation, waste heat utilization, and redundancy under component unavailability. Battery-only systems without PHS or hydrogen storage resulted in 37–39% higher capital costs and ~53% higher COE, confirming the economic advantage of long-duration PHS. Sensitivity analyses indicate that real discount rate variations notably affect NPC and COE, particularly for battery-only systems. Component cost sensitivity highlights PV and WT as dominant cost drivers, while PHS stabilizes system economics and the hydrogen subsystem contributes minimally due to its small scale. Overall, these results confirm the techno-economic and environmental benefits of combining seawater-based PHS with optional hydrogen and battery storage for sustainable hotel-scale applications. Full article

Data-driven prioritization of photovoltaic (PV), battery, and converter technologies is crucial for achieving sustainability, efficiency, and cost-effectiveness in the increasingly complex domain of hybrid renewable energy systems (HRES). Conducting an in-depth and systematic ranking of these components for solar-based HRESs necessitates a comprehensive multi-criteria decision-making (MCDM) framework. This study develops as the most recent and integrated approach available in the literature. To ensure balanced and objective weighting, five quantitative weighting techniques, Entropy, Standard Deviation, CRITIC, MEREC, and CILOS, were aggregated through the Bonferroni operator, thereby minimizing subjective bias while preserving robustness. The final ranking was executed using the measurement of alternatives and ranking according to compromise solution method (MARCOS). Subsequently, comparative validation was conducted across eight additional MCDM methods, supplemented by correlation and sensitivity analysis to evaluate the consistency and reliability of the obtained results. The results revealed that thin-film PV modules (0.7108), hybrid supercapacitor batteries (0.6990), and modular converters (1.1812) emerged as the top-performing technologies, reflecting optimal trade-offs among technical, economic, and environmental performance criteria. Correlation analysis (ρ > 0.9 across nine MCDM methods) confirmed the stability of the rankings. The results establish a reproducible decision-support framework for designing sustainable hybrid systems. These technologies demonstrated superior thermal stability, cycling endurance, and system scalability, respectively, thus laying a foundation for more sustainable and resilient hybrid energy system deployments. The proposed framework provides a reproducible, transparent, and resilient decision-support tool designed to assist engineers, researchers, and policy-makers in developing reliable low-carbon components for the realization of future carbon-neutral energy infrastructures. Full article

This study evaluated the performance of a hybrid heat pump system integrating photovoltaic–thermal (PVT) panels with a standing column well (SCW) geothermal system in a strawberry greenhouse. The PVT panels, installed over 10% of the area of a 175 m³ greenhouse, stored excess solar heat in an aquifer to offset the reduced efficiency of the geothermal source during extended operation. The results showed that the hybrid system can supply 11,253 kWh of heat energy during the winter, maintaining the night time indoor temperature at 10 °C even when outdoor conditions dropped to −10.5 °C. The PVT system captured 11,125 kWh of solar heat during heating the off season, increasing the heat supply up to 22,378 kWh annually. Additionally, the system generated 3839 kWh of electricity, which significantly offset the 36.72% of the annual pump system electricity requirements, enhancing the system coefficient of performance (COP) of 3.38. Strawberry production increased by 4% with 78% heating cost saving compared to a kerosene boiler system. The results show that the PVT system effectively supports the geothermal system, improving heating performance and demonstrating the feasibility of hybrid renewable energy in smart farms to enhance efficiency, reduce fossil fuel use, and advance carbon neutrality. Full article

The ongoing energy transition and decarbonization efforts have prompted the development of Hybrid Renewable Energy Systems (HRES) capable of integrating multiple generation and storage technologies to enhance energy autonomy. Among the available options, hydrogen has emerged as a versatile energy carrier, yet most studies have focused either on stationary applications or on mobility, seldom addressing their integration withing a single framework. In particular, the potential of Metal Hydride (MH) tanks remains largely underexplored in the context of sector coupling, where the same storage unit can simultaneously sustain household demand and provide in-house refueling for light-duty fuel-cell vehicles. This study presents the design and analysis of a residential-scale HRES that combines photovoltaic generation, a PEM electrolyzer, a lithium-ion battery and MH storage intended for direct integration with a fuel-cell electric microcar. A fully dynamic numerical model was developed to evaluate system interactions and quantify the conditions under which low-pressure MH tanks can be effectively integrated into HRES, with particular attention to thermal management and seasonal variability. Two simulation campaigns were carried out to provide both component-level and system-level insights. The first focused on thermal management during hydrogen absorption in the MH tank, comparing passive and active cooling strategies. Forced convection reduced absorption time by 44% compared to natural convection, while avoiding the additional energy demand associated with thermostatic baths. The second campaign assessed seasonal operation: even under winter irradiance conditions, the system ensured continuous household supply and enabled full recharge of two MH tanks every six days, in line with the hydrogen requirements of the light vehicle daily commuting profile. Battery support further reduced grid reliance, achieving a Grid Dependency Factor as low as 28.8% and enhancing system autonomy during cold periods. Full article

Floating photovoltaic (FPV) systems are promising for coastal aquaculture where reliable electricity is essential for pumping, oxygenation, sensing, and control. A sustainable FPV–storage hybrid tailored to monsoon-prone sites is developed, with emphasis on energy efficiency and structural resilience. The prototype combines dual-axis solar tracking with a spray-cooling and cleaning subsystem and an active wind-protection strategy that automatically flattens the array when wind speed exceeds 8.0 m/s. Temperature, wind speed, and irradiance sensors are coordinated by an Arduino-based supervisor to optimize tracking, thermal management, and tilt control. A 10 W floating module and a fixed-tilt reference were fabricated and tested outdoors in Penghu, Taiwan. The FPV achieved a 25.17% energy gain on a sunny day and a 40.29% gain under overcast and windy conditions, while module temperature remained below 45 °C through on-demand spraying, reducing thermal losses. In addition, a hybrid energy storage system (HESS), integrating a 12 V/10 Ah lithium-ion battery and a 12 V/24 Ah lead-acid battery, was validated using a priority charging strategy. During testing, the lithium-ion unit was first charged to stabilize the control circuits, after which excess solar energy was redirected to the lead-acid battery for long-term storage. This hierarchical design ensured both immediate power stability and extended endurance under cloudy or low-irradiance conditions. The results demonstrate a practical, low-cost, and modular pathway to couple FPV with hybrid storage for coastal energy resilience, improving yield and maintaining safe operation during adverse weather, and enabling scalable deployment across cage-aquaculture facilities. Full article

The integration of electric underfloor heating systems with photovoltaic (PV) panels presents a promising approach to enhance thermal efficiency and energy sustainability in residential heating. This study investigates the performance of such hybrid systems under different energy supply scenarios. Numerical modeling and simulations were employed to evaluate underfloor heating performance using three electricity sources: standard electric supply, solar-generated energy, and a combined configuration. Solar irradiance sensors were utilized to collect input solar radiation data, which served as a critical parameter for numerical modeling and simulations. The set outdoor air temperature used in the analysis represents an average value calculated from data measured by environmental sensors at the location of the building during the monitored period. Key metrics included indoor air temperature, time to thermal stability, and heat loss relative to outdoor conditions. The combined electric and solar-powered system demonstrated thermal efficiency, improving indoor air temperature by up to 63.6% compared to an unheated room and achieving thermal stability within 22 h. Solar-only configuration showed moderate improvements. Heat loss analysis revealed a strong correlation with indoor–outdoor temperature differentials. Hybrid underfloor heating systems integrating PV panels significantly enhance indoor thermal comfort and energy efficiency. These findings support the adoption of renewable energy technologies in residential heating, contributing to sustainable energy transitions. Full article

The paper presents a linear optimisation model aimed at improving the design and operational efficiency of home energy systems (HESs). It focuses on integrating photovoltaic (PV) installations, hybrid heating systems, and emerging energy storage systems (ESSs). Driven by the EU climate policy and the evolution of the Polish electricity market, which have caused price volatility, the model examines the economic and technical feasibility of shifting detached and semi-detached houses towards low-emission or zero-emission energy self-sufficiency. The model simultaneously optimises the sizing and hourly operation of electricity and heat storage systems, using real-world data from PV output, electricity and gas consumption, and weather conditions. The key contributions include optimisation based on large data samples, evaluation of the synergy between a hybrid heating system with a gas boiler (GB) and a heat pump (HP), analysis of the impact of demand-side management (DSM), storage capacity decline, and comparison of commercial and emerging storage technologies such as lithium-ion batteries, redox flow batteries, and high-temperature thermal storage (HTS). Analysis of multiple scenarios based on three consecutive heating seasons and projected future conditions demonstrates that integrated PV and storage systems, when properly designed and optimally controlled, significantly lower energy costs for prosumers, enhance energy autonomy, and decrease CO₂ emissions. The results indicate that under current market conditions, Li-ion batteries and HTS provide the most economically viable storage options. Full article

Achieving net-zero emissions in arid and high-solar-yield regions demands innovative, cost-effective, and scalable energy technologies. This study conducts a comprehensive techno-economic analysis and assessment of a novel hybrid photovoltaic–thermal solar collector (U.S. Patent No. 11,431,289) that integrates a reverse flat plate collector and mini-concentrating solar thermal elements. The system was tested in Qatar and Germany and simulated via a System Advising Model tool with typical meteorological year data. The system demonstrated a combined efficiency exceeding 90%, delivering both electricity and thermal energy at temperatures up to 170 °C and pressures up to 10 bars. Compared to conventional photovoltaic–thermal systems capped below 80 °C, the system achieves a heat-to-power ratio of 6:1, offering an exceptional exergy performance and broader industrial applications. A comparative financial analysis of 120 MW utility-scale configurations shows that the PVT + ORC option yields a Levelized Cost of Energy of $44/MWh, significantly outperforming PV + CSP ($82.8/MWh) and PV + BESS ($132.3/MWh). In addition, the capital expenditure is reduced by over 50%, and the system requires 40–60% less land, offering a transformative solution for off-grid data centers, water desalination (producing up to 300,000 m³/day using MED), district cooling, and industrial process heat. The energy payback time is shortened to less than 4.5 years, with lifecycle CO₂ savings of up to 1.8 tons/MWh. Additionally, the integration with Organic Rankine Cycle (ORC) systems ensures 24/7 dispatchable power without reliance on batteries or molten salt. Positioned as a next-generation solar platform, the Hassabou system presents a climate-resilient, modular, and economical alternative to current hybrid solar technologies. This work advances the deployment readiness of integrated solar-thermal technologies aligned with national decarbonization strategies across MENA and Sub-Saharan Africa, addressing urgent needs for energy security, water access, and industrial decarbonization. Full article