Search Results (11)

In the Internet of Things (IoT) era, the demand for cost-effective, flexible, wearable antennas and circuits has been growing. Accordingly, screen-printing techniques are becoming more popular due to their lower costs and high-volume manufacturing. This paper presents and investigates a full-screen-printed 1 × 4 Quasi-Yagi-Uda antenna array on a high-transparency flexible Zeonor thin-film substrate for emerging 26 GHz band (24.25–27.55 GHz) 5G applications. As part of this study, screen-printing implementation rules are developed by properly managing ink layer thickness on a transparent flexible Zeonor thin-film dielectric to achieve a decent antenna array performance. In addition, a screen-printing repeatability study has been carried out through a performance comparison of 24 antenna array samples manufactured by our research partner from CEA-Liten Grenoble. Despite the challenging antenna array screen printing at higher frequencies, the measured results show a good antenna performance as anticipated from the traditional subtractive printed circuit board (PCB) manufacturing process using standard substrates. It shows a wide-band matched input impedance from 22–28 GHz (i.e., 23% of relative band-width) and a maximum realized gain of 12.8 dB at 27 GHz. Full article

With the rapid advancement of Internet of Things (IoT) technology, ultra-wideband flexible transparent antennas have garnered substantial attention for their potential applications in wireless communication devices. Poly(methyl methacrylate) (PMMA), renowned for its exceptional optical properties and favorable processing characteristics, has been extensively utilized as a transparent substrate material for antennas. However, the intrinsic brittleness of transparent PMMA substrates poses a significant limitation in applications such as flexible antennas. In this study, we introduce a superspreading strategy to address the complex trade-off among transparency, toughness, and dielectric properties in flexible electronics through molecular disorder engineering. The PMMA films fabricated via this superspreading strategy exhibit a visible transmittance of 85–95% at 400 nm, a toughness of 9 × 10⁵ J/m³ (representing an enhancement of 150–225% compared to conventional methods), and a frequency-stable permittivity (ε_r = 3.6 ± 0.05) within the 9–12 GHz range. These films also feature a precisely tunable thickness range of 5.5–60 μm. The PMMA-based flexible transparent antenna demonstrates a gain of 2–4 dBi and a relative bandwidth of 40%, thereby confirming its suitability for ultra-wideband applications. Collectively, this research presents a promising candidate for the development of ultra-wideband flexible transparent antennas. Full article

In recent years, the rapid development of wireless technologies has led to the widespread adoption of the Internet of Things (IoT) in various fields. One of the fastest-growing segments of IoT is the “smart” wearables sector. In the next few years, the development of flexible plant-wearable devices that can provide vital information about the physiological characteristics of plants will be essential to support the faster growth of precision agriculture. We propose a small (overall size Ø35 mm × 0.8 mm), ultra-lightweight (0.4 g), and elegant-shaped antenna for unobtrusive integration on a plant surface for application in IoT-based precision agriculture at ISM 2.45 GHz band. The radiating element has a design that resembles a dragonfly, making the antenna visually unnoticeable. We used ZZ Plant leaves as the substrate for the antenna and transparent polymer foil for encapsulating the conductive parts, achieving a highly flexible, waterproof, and chemically resistant antenna for application in harsh environments. The obtained results indicate that the antenna is resilient to changes in substrate relative permittivity up to ±20%. It exhibits high radiation efficiency (between 26% and 40%) and omnidirectional patterns across the ISM 2.45 GHz band. Moreover, the measured results align reasonably well with the simulated ones. Full article

In this study, a novel microfluidic frequency reconfigurable and optically transparent water antenna is designed using three-dimensional (3D) printing technology. The proposed antenna consists of three distinct parts, including a circularly shaped distilled water ground, a sea water-based circular segmented radiator, and a circularly shaped distilled water-based load, all ingeniously constructed from transparent resin material. The presented antenna is excited by a disk-loaded probe. The frequency of the antenna can be easily tuned by filling and emptying/evacuating sea water from the multisegmented radiator. The radiator consists of three segments with different radii, and each segment has a different resonant frequency. When the radiator is filled, the antenna resonates at the frequency of the segment that is filled. When all the radiator segments are filled, the antenna operates at the resonant frequency of 2.4 GHz and possesses an impedance bandwidth of 1.05 GHz (40%) in the range of 2.10–3.15 GHz. By filling different radiator segments, the frequency could be tuned from 2.4 to 2.6 GHz. In addition to the frequency-switching characteristics, the proposed antenna exhibits high simulated radiation efficiency (with a peak performance reaching 95%) and attains a maximum realized gain of 3.8 dBi at 2.9 GHz. The proposed antenna integrates water as its predominant constituent, which is easily available, thereby achieving cost-effectiveness, compactness, and transparency characteristics; it also has the potential to be utilized in future applications, involving transparent and flexible electronics. Full article

In order to meet the ever-increasing 5G and beyond Radio Access Network (RAN) densification demands, Fiber-Wireless transport networks are expected to play a key role in accelerating 5G deployment by providing the essential RAN flexibility, while at the same time avoiding costly fiber-trenching. Due to the inefficiency of the Radio-and-Fiber (R&F) networks for application in dense RAN topologies, Analog-Radio-over-Fiber (A-RoF) technology is regarded as a key enabling solution, since it greatly simplifies the remote antenna while offering very high spectral efficiency. For this type of dense A-RoF network, new and efficient Medium-Transparent-Medium Access Control (MT-MAC) protocols are required that can concurrently arbitrate optical and wireless resources, while at the same time offering the necessary Quality-of-Service (QoS) for correct operation of the combined Fronthaul/Midhaul/Backhaul segments present in 5G disaggregated RANs. In this paper, we propose a QoS-enabled MT-MAC (qMT-MAC) protocol that can combine Fronthaul/Midhaul/Backhaul flows under the same framework, while satisfying the strict delay and jitter requirements set by the relevant standards. Results show that qMT-MAC concurrently achieves the delay and jitter requirements for combined Fronthaul/Midhaul/Backhaul traffic even when loads approach the network’s capacity, while attested enhanced prioritization policies can offer up to a 64% delay reduction over State-of-the-Art MT-MAC protocols. Full article

The need for more sustainable printed electronics has emerged in the past years. Due to this, the use of nanocellulose (NC) extracted from cellulose has recently been demonstrated to provide interesting materials such as functional inks and transparent flexible films due to its properties. Its high specific surface area together with the high content of reactive hydroxyl groups provide a highly tailorable surface chemistry with applications in ink formulations as a stabilizing, capping, binding and templating agent. Moreover, NC mechanical, physical and thermal properties (high strength, low porosity and high thermal stability, respectively) provide an excellent alternative for the currently used plastic films. In this work, we present a process for the production of water-based conductive inks that uses NC both as a template for silver nanoparticles (Ag NPs) formation and as an ink additive for ink formulation. The new inks present an electrical conductivity up to 2 × 10⁶ S/m, which is in the range of current commercially available conductive inks. Finally, the new Ag NP/NC-based conductive inks have been tested to fabricate NFC antennas by screen-printing onto NC-coated paper, demonstrating to be operative. Full article

This paper presents a circularly polarized flexible and transparent circular patch antenna suitable for body-worn wireless-communications. Circular polarization is highly beneficial in wearable wireless communications, where antennas, as a key component of the RF front-end, operate in dynamic environments, such as the human body. The demonstrated antenna is realized with highly flexible, robust and transparent conductive-fabric-polymer composite. The performance of the explored flexible-transparent antenna is also compared with its non-transparent counterpart manufactured with non-transparent conductive fabric. This comparison further demonstrates the suitability of the proposed materials for the target unobtrusive wearable applications. Detailed numerical and experimental investigations are explored in this paper to verify the proposed design. Moreover, the compatibility of the antenna in wearable applications is evaluated by testing the performance on a forearm phantom and calculating the specific absorption rate (SAR). Full article

This paper presents a systematic parameter study on mesh pattern for optically transparent flexible antenna with feedline. In implementing a transparent flexible antenna using a metal mesh, transparency and performance of antenna and feedline are opposite factors. To understand how both elements are affected by the design parameters of the mesh, we analyze the performance of the feedlines and antennas according to the design parameters of diamond and square meshes. Moreover, the effect of the difference in the shape of diamond mesh and square mesh on performance is analyzed. The measured results of the fabricated samples offer the feasibility of implementing transparent feedlines and antennas with similar performance to nontransparent feedlines and antennas. Full article

This paper presents the design of a compact size band patch antenna for 5G wireless communications. This wideband antenna was designed on a glass substrate (12 × 11 × 2 mm³) and is optically transparent and compact. It consists of a radiation patch and a ground plane using AgHT-8 material. The antenna design comprises rectangular shaped branches optimized to attain the wideband characteristics. The calculated impedance bandwidth is 7.7% covering the frequency range of 25 to 27 GHz. A prototype of the antenna and various parameters such as return loss plot, gain plot, radiation pattern plot, and voltage standing wave ratio (VSWR) are presented and discussed. The simulated results of this antenna show that it is well suited for future 5G applications because of its transparency, flexibility, light weight, and wide achievable frequency bandwidth near the millimeter wave frequency band. Full article

Hybrid electronic materials combine the excellent electronic properties of metals and semiconductors with the mechanical flexibility, ease of processing, and optical transparency of polymers. This talk will discuss hybrids that combine organic and inorganic components at different scales. Metallic and semiconductor nanoparticle cores are coated with conductive polymer shells to create “hybrid inks” that can be inkjet-printed and form conductive leads without any sintering step. Transparent electrodes are printed using ultrathin metal nanowires with core diameters below 2 nm. The chemically synthesized wires spontaneously form percolating structures when patterned with a soft stamp; this rapidly yields optically transparent grid electrodes, even on demanding soft substrates. These new hybrid electronic materials enable the fabrication of soft electronics, including flexible sensors on polymer foils, radio-frequency identification (RFID) antennae on cardboard, and soft human–machine interfaces. Selected devices will be covered at the end of the talk. Full article

Printed electronics on flexible substrates has attracted tremendous research interest research thanks its low cost, large area production capability and environmentally friendly advantages. Optimal characteristics of silver nanoparticles (Ag NPs) based inks are crucial for ink rheology, printing, post-print treatment, and performance of the printed electronics devices. In this review, the methods and mechanisms for obtaining Ag NPs based inks that are highly conductive under moderate sintering conditions are summarized. These characteristics are particularly important when printed on temperature sensitive substrates that cannot withstand sintering of high temperature. Strategies to tailor the protective agents capping on the surface of Ag NPs, in order to optimize the sizes and shapes of Ag NPs as well as to modify the substrate surface, are presented. Different (emerging) sintering technologies are also discussed, including photonic sintering, electrical sintering, plasma sintering, microwave sintering, etc. Finally, applications of the Ag NPs based ink in transparent conductive film (TCF), thin film transistor (TFT), biosensor, radio frequency identification (RFID) antenna, stretchable electronics and their perspectives on flexible and printed electronics are presented. Full article