Search Results (1,208)

Understanding the interactions between ionic liquid ions and lithium-metal surfaces is critical for designing safer and more efficient lithium metal batteries. In this work, we use density functional theory to investigate the electronic structure, binding energies, work-function shifts and interfacial charge redistribution of several ionic liquid ions, including FSI⁻, TFSI⁻, ${\mathrm{P}\mathrm{F}}_6^{-}$, ${\mathrm{B}\mathrm{F}}_4^{-}$, DFOB⁻, Pyr14⁺, and EMIM⁺, on a Li-metal anode (Li_m). Absorption orientation-dependent effects are examined for each molecule. Specifically, differences in charge density and electron localization function analyses revealed unique patterns of electron accumulation and delocalization that highlighted specific atomic roles in interfacial bonding. Interfacial charge transfer is analyzed through Bader charges, revealing a moderate charge redistribution for the cations (EMIM⁺, Pyr14⁺), and a more significant charge uptake for the reactive anions (FSI⁻, TFSI⁻, DFOB⁻). Among cations, EMIM⁺ was determined to have the most interfacial stability, while Pyr14⁺ displayed mid-level reactivity. For the anions, varying tendencies for bond formation with lithium metal and potential fragmentation could be determined. Overall, these discoveries detail an atomistic analysis of ionic liquid to Li_m interactions providing additional pathways for molecular design techniques to stabilize electrolytes performing not high-cost computational calculations. Full article

Perfluorooctanesulfonate (PFOS) is a typical persistent organic pollutant, which presents a significant risk to the ecosystem and human health. Therefore, the development of a highly sensitive and effective detection technique for PFOS has aroused wide concern. In this study, for the mesoporous metal–organic frameworks (MOFs), Cr-MIL-101 were used as the precursor. And the poly(3,4-ethylenedioxythiophene) (PEDOT) using as molecularly imprinted polymers (MIPs) was loaded on Cr-MIL-101 to form a core–shell structure. The obtained Cr-MIL-101@PEDOT/MIP composites integrate the high specific surface area of Cr-MIL-101 and the specific recognition capability of PEDOT/MIP. The glassy carbon electrode (GCE) interface modified by them can specifically adsorb PFOS through electrostatic interactions, coordination by Cr metal nodes, hydrophobic interaction, and hydrogen bonding, etc. The adsorbed PFOS molecules could block the active sites at the electrode interface, causing the current decay of the redox probe. Following the quantitative analysis of peak current decay values using the Langmuir model and the Freundlich–Langmuir model, a wide detection range (0.1–200 nM) and a low detection limit (0.025 nM) were obtained. Characterization techniques including scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET), X-ray photoelectron spectroscopy (XPS), and electrochemical methods were employed to validate the fabrication of the composites. Moreover, Cr-MIL-101@PEDOT/MIP/GCE showed satisfactory stability, repeatability, and selectivity, providing an effective method for the detection of PFOS in practical samples, showing a wide prospective application. Full article

The reduced form of nicotinamide adenine dinucleotide phosphate (NADPH) is a primary electron donor for both antioxidant enzymes, such as glutathione reductase, and pro-oxidant enzymes, such as NADPH oxidases that produce reactive oxygen species (ROS) and nitric oxide synthases that generate nitric oxide which act as signaling molecules. Monitoring NADPH levels, NADPH/NADP⁺ ratio, and especially distinguishing from NADH, provides vital information about cellular redox status, energy generation, survival, lineage specification, and death pathway selection. NADPH detection is key to understanding metabolic reprogramming in cancer, aging, and cardiovascular, hormonal, neurodegenerative, and autoimmune diseases. Liquid chromatography combined with mass spectrometry (LC-MS) is crucial for NADPH detection in redox signaling because it offers the high sensitivity, specificity, and comprehensive profiling needed to quantify this vital but labile redox cofactor in complex biological samples. Using hepatoma cell lines, liver tissues, and primary hepatocytes from mice lacking transaldolase or nicotinamide nucleotide transhydrogenase, or having lupus, this study demonstrates that accurate measurement of NADPH depends on its preservation in reduced form which can be optimally achieved by extraction of metabolites in alkaline solution, such as 0.1 M potassium hydroxide (KOH) in comparison to 80% methanol (MeOH) alone or 40:40:20 methanol/acetonitrile/formic acid solution. While KOH extraction coupled with hydrophilic interaction liquid chromatography (HILIC) and mass spectrometry most reliably detects NADPH, NADP, NADH, NAD, polyamines, and polyols, MeOH extraction is best suited for detection of glutathione and overall discrimination between complex metabolite extracts. This study therefore supports performing parallel KOH and MeOH extractions to enable comprehensive metabolomic analysis of redox signaling. Full article

The interfacial properties in carbon fiber (CF)-reinforced polymer composites are substantially limited by the chemically inactive and smooth CF surfaces. In this study, zeolitic imidazolate framework 90 (ZIF90) was chemically grafted onto CF surfaces via polyethyleneimine (PEI) as a coupling agent to construct a hierarchical reinforcement interface in CF/epoxy composite. The successful synthesis of CF grafted with PEI and ZIF90 (CF-PEI-ZIF90) was systematically characterized by Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and X-ray diffraction (XRD). The incorporation of ZIF90 nanocrystals and PEI molecules into CF surfaces effectively improved interfacial adhesion through mechanical interlocking and chemical interactions, thereby optimizing stress transfer efficiency at the fiber–matrix interface and improving the interfacial properties of the composite. Additionally, the resultant CF-PEI-ZIF90/epoxy composite demonstrated significant mechanical enhancement, with the tensile and bending strengths increasing by 33.5% and 21.4%, respectively, compared to unmodified CF/epoxy composites. This work provides a novel strategy for enhancing the interfacial performance of CF composites by leveraging the unique properties of metal-organic frameworks, which is critical for advancing high-performance structural materials in aerospace and automotive applications. Full article

The Co(II) complex [CoCl₂(AImd)₂] (AImd = 1-allylimidazole) was reinvestigated using a combination of experimental and theoretical methods. The previously reported crystal structure was redetermined and Hirshfeld surface analysis and enrichment ratios were added showing that intermolecular H⋯Cl and π⋯π interactions are the primary forces in the crystal structure, while H⋯H interactions dominate the surface of the molecule, making it rather hydrophobic in keeping with a low solubility in water. A Quantum Theory of Atoms in Molecules (QTAIM)/Non-Covalent Interactions (NCI)-Reduced Density Gradient (RDG) analysis on a dimeric model showed that the energies V(r) of the classical H⋯Cl hydrogen bonds range from −3.64 kcal/mol to −0.75 kcal/mol and were augmented by hydrophobic H⋯C interactions of >1 kcal/mol. T-dependent magnetization measurements reveal paramagnetic behavior with an effective magnetic moment of µ_eff = 4.66(2) µ_B. UV-vis absorption spectra in solution showed intense absorptions peaking at 240 nm, corresponding to intraligand π→π* transitions within the 1-allylimidazole moiety and a structured absorption around 600 nm, which is attributed to the spin-allowed d→d transitions of the high-spin Co(II) d⁷ ion in a distorted tetrahedral geometry. Both assignments were confirmed through TD-DFT calculations on the electronic transitions and agree with the DFT-calculated compositions of the frontier molecular orbitals. Molecular docking to hypoxia-inducible factor-1 alpha (HIF-1α) gave a docking score of −5.48 kcal/mol and showed hydrophobic⋯hydrophobic π-stacking interactions with the Ile233, Leu243, Val338, and Leu262 residues. A higher docking score of −6.11 kcal/mol and predominant hydrophobic⋯hydrophobic interactions with Trp296, His279, and Ile281 were found for HIF-1 inhibiting factor (FIH-1). Full article

We have theoretically examined the intermolecular interactions in the cationic states of π-stacked dimers of 4nπ antiaromatic molecules. The ground state of face-to-face π-dimer models, consisting of cyclobutadienes (CBDs), was analyzed as a function of the stacking distance (d) for their monocationic and dicationic states using multi-reference second-order perturbation theory. Multi-configurational wavefunction analysis in a diabatic representation was employed to understand the electronic structures of the dimer models in terms of the monomer electron configurations. It is found that the monocationic dimer exhibits a local minimum at about d = 2.4 Å in the ground state, where each monomer is represented by a superposition between neutral triplet and cationic doublet electron configurations. Crossing of the ground and excited states occurs through changing d, which is due to the small energy gap between the highest occupied and lowest unoccupied molecular orbitals of antiaromatic molecules. Full article

Organophosphate pesticides are among the most persistent and toxic contaminants in aquatic environments, requiring effective strategies for detection and remediation. In this work, density functional theory (DFT) calculations were employed to investigate the adsorption of nine representative organophosphates (glyphosate, malathion, diazinon, azinphos-methyl, fenitrothion, parathion-methyl, disulfoton, tokuthion, and ethoprophos) on mercaptobenzothiazole disulfide (MBTS) and MBTS-functionalized graphene (G–MBTS). All simulations were performed in aqueous solution using the SMD solvation model with dispersion corrections and counterpoise correction for basis set superposition error. MBTS alone displayed a range of affinities, suggesting potential selectivity across the organophosphates, with adsorption energies ranging from 0.27 to 1.05 eV, malathion being the strongest binder and glyphosate the weakest. Anchoring of MBTS to graphene was found to be highly favorable (1.26 eV), but the key advantage is producing stable adsorption platforms that promote planar orientations and $\pi$–$\pi$/dispersive interactions. But the key advantage is not stronger binding but the tuning of interfacial electronic properties: all G–MBTS–OP complexes show uniform, narrow HOMO-LUMO gaps (∼0.79 eV) and systematically larger charge redistribution. These features are expected to enhance electrochemical readout even when adsorption strength was comparable or slightly lower (0.47–0.88 eV) relative to MBTS alone. A Quantum Theory of Atoms in Molecules (QTAIM) analysis of the G–MBTS–malathion complex revealed a dual stabilization mechanism: multiple weak C–H⋯$\pi$ interactions with graphene combined with stronger S⋯O and hydrogen-bonding interactions with MBTS. These results advance the molecular-level understanding of pesticide–surface interactions and highlight MBTS-functionalized graphene as a promising platform for the selective detection of organophosphates in water. Full article

Zinc oxide (ZnO) nanomaterials have emerged as promising candidates for gas sensing applications due to their high sensitivity, fast response–recovery cycles, thermal and chemical stability, and low fabrication cost. However, the performance of pristine ZnO remains limited by high operating temperatures, poor selectivity, and suboptimal detection at low gas concentrations. To address these limitations, significant research efforts have focused on dopant incorporation and polymer hybridization. This review summarizes recent advances in dopant engineering using elements such as Al, Ga, Mg, In, Sn, and transition metals (Co, Ni, Cu), which modulate ZnO’s crystal structure, defect density, carrier concentration, and surface activity—resulting in enhanced gas adsorption and electron transport. Furthermore, ZnO–polymer nanocomposites (e.g., with polyaniline, polypyrrole, PEG, and chitosan) exhibit improved flexibility, surface functionality, and room-temperature responsiveness due to the presence of active functional groups and tunable porosity. The synergistic combination of dopants and polymers facilitates enhanced charge transfer, increased surface area, and stronger gas–molecule interactions. Where applicable, sol–gel-based studies are explicitly highlighted and contrasted with non-sol–gel routes to show how synthesis controls defect chemistry, morphology, and sensing metrics. This review provides a comprehensive understanding of the structure–function relationships in doped ZnO and ZnO–polymer hybrids and offers guidelines for the rational design of next-generation, low-power, and selective gas sensors for environmental and industrial applications. Full article

Formaldehyde is a toxic gas commonly found in industrial emissions, and ZnO is widely used for its detection due to its excellent gas-sensing properties. Most studies focus on non-polar or low-index ZnO surfaces, whereas investigations on high-index polar surfaces remain limited. In this work, density functional theory (DFT) was employed to study CH₂O adsorption on the ZnO [$10\overline{11}$] surface. By exploring various coverages, adsorption sites, and unit cell dimensions, ten stable configurations were identified. A maximum adsorption energy of −2.19 eV/CH₂O on configuration S1 was obtained, surpassing reported low-index surfaces. Strong adsorption originated from dual unsaturated Zn bonds, which promoted C–C formation between CH₂O molecules and induced synergistic Zn–O bonding. Adsorption further led to sp³-like hybridization and O 2p/Zn 3d orbital interactions, significantly narrowing the band gap. Electron redistribution, as evidenced by charge density analysis, revealed strong electronic modulation. This work clarifies the microscopic mechanism of ZnO high-index surfaces, offering insights for optimizing gas-sensing materials. Full article

Background: In this research work, novel pyrazolone-derived oxadiazole-based benzamide derivatives (1–10) were synthesized through unique and facile synthetic routes. Introduction: These scaffolds were designed to be therapeutically more effective and have fewer side effects. Methods: To confirm the structure of analogs in detail, we employed ¹HNMR, ¹³CNMR, and HREI-MS spectroscopy. The potential of all derivatives was tested by screening them against alpha-amylase and alpha-glucosidase in comparison with reference anti-diabetic drug acarbose (4.50 ± 0.20 µM and 4.90 ± 0.30 µM). Results & Discussion: Among all tested analogs and standard drugs, derivative 3 proved to be the most promising candidate. It exhibited the most powerful inhibitory effect (IC₅₀ = 3.20 ± 0.20 µM and 3.60 ± 0.10 µM). To further investigate its activity, the experimental results were supported by in silico investigations. Molecular docking demonstrated strong and viable interactions between enzymes and the most potent compound. DFT calculations validated the electronic configuration, stability, and reactivity of lead molecules. Furthermore, the ADMET profile predicted the favorable drug likeness properties and low toxicity. The results of docking were further confirmed via molecular dynamics analysis, whereas the pharmacophore model of analog 3 supports the formation of a stable hydrogen bond network of derivatives with the receptor site of the enzyme. Conclusions: Collectively in silico and in vitro results underscore the therapeutic potential of these derivatives for the effective treatment of diabetes in the future. Full article

In this study, first-principles calculations were employed to systematically investigate the interaction mechanisms between (18-crown-6) potassium (18C6-K⁺) and six typical defect sites on the SnO₂ (110) surface, including Sn_i + Sn_O, O_i + O_Sn, V_O + Sn_i, V_Sn + Sn_O, V_Sn + Sn_i, and Sn_i. Six intrinsic or complex defects universally coexist on the SnO₂ surface, and the defect states they introduced allow for precise tuning of material performance. The results demonstrated that the 18C6-K⁺ molecule can stably adsorb on all six defect sites and significantly increase defect formation energies, indicating its thermodynamic capability to suppress defect generation. A subsequent density of states (DOS) analysis revealed that the 18C6-K⁺ molecule exhibits strong defect passivation effects at Sn_i + Sn_O, V_O + Sn_i, V_Sn + Sn_i, and Sn_i sites, and partially mitigated the electronic disturbances induced by O_i + O_Sn and V_Sn + Sn_O defects. Furthermore, the incorporation of 18C6-K⁺ has been shown to reduce the electronic effective mass of defective systems, thereby enhancing surface carrier transport. A subsequent charge density difference (CDD) analysis revealed that the 18C6-K⁺ molecule forms Sn-ether and O-ether interactions through its ether bonds (C-O-C) with surface Sn and O atoms, inducing interfacial electronic reconstruction and charge transfer. The Bader charge analysis revealed that the H, C, and O atoms in 18C6-K⁺ lose electrons, whereas the Sn or O atoms at the surface defect sites gain electrons. This outcome is consistent with the CDD analysis and quantitatively confirms the extent of electron transfer from 18C6-K⁺ to the SnO₂ defect regions. These interactions effectively passivate defect states, thereby enhancing interfacial stability. The present study offers theoretical guidance and design insights for the development of molecular passivation strategies in SnO₂-based optoelectronic devices. Full article

Molecules provide the smallest possible circuits in which quantum interference and electron correlation can be engineered to perform logical operations, including the universal NAND gate. We investigate a chemically encoded quantum NAND tree based on alkynyl-extended iso-polyacetylene backbones, where inputs are set by end-group substitution and outputs are read from the presence or absence of transmission nodes. Using quantum many-body transport theory, we show that NAND behavior persists in the presence of dynamic correlations, but that the nodal positions and their chemical shifts depend sensitively on electron–electron interactions. This sensitivity highlights the potential of these systems not only to probe the strength of electronic correlations but also to harness them in shaping logical response. The thermopower is identified as a chemically robust readout of gate logic, providing discrimination margins that greatly exceed typical experimental uncertainties, in an observable governed primarily by the variation of transport rather than its absolute magnitude. Full article

Hydrogen energy is viewed as a promising green energy source because of its high energy density, abundant availability, and clean combustion results. Hydrogen storage is the critical link in a hydrogen economy. Using first-principles density functional theory calculations, this work explored the role of B and N in modulating the binding properties of transition metal-modified graphene. The hydrogen storage performance of Sc-, Ti-, and V-modified B-doped graphene was evaluated. Boron doping induces an electron-deficient state, enhancing interactions between transition metals and graphene. Sc, Ti, and V preferentially adsorbed at the carbon ring’s hollow site in B-doped graphene, with their binding energies being 1.87, 1.74, and 1.69 eV higher than those in pure graphene, respectively. These systems can stably adsorb up to 5, 4, and 4 H₂ molecules, with average adsorption energies of −0.528, −0.645, and −0.620 eV/H₂, respectively. The hydrogen adsorption mechanism was dominated by orbital interactions and polarization effects. Among the systems studied, Sc-modified B-doped graphene exhibited superior hydrogen storage characteristics, making it a promising candidate for reversible applications. Full article

Poly(5-indolylboronic acid) was synthesized electrochemically via cyclic voltammetry using various electrodes, including screen-printed carbon electrodes, glassy carbon electrodes, highly oriented pyrolytic graphite, and 304 stainless steel. This study provides a thorough analysis of the resulting conducting polymer’s electrochemical behavior, morphological and structural characteristics, and potential applications. The following techniques were employed: cyclic voltammetry, electrochemical impedance spectroscopy, Fourier-transform infrared spectroscopy, Raman spectroscopy, and field-emission scanning electron microscopy. The polymer exhibits pH-dependent redox activity within the pH range of 4–10, displaying Nernstian behavior and achieving a specific areal capacitance of 0.234 mF∙cm⁻² on an SPCE electrode. This result highlights the electrode’s efficiency in terms of charge storage. Impedance data indicate that the modified electrodes demonstrate a substantial decrease in charge transfer resistance and improved interfacial conductivity compared to bare electrodes. Contact angle measurements show that the presence of boronic acid groups makes the polymer hydrophilic. However, when 5PIBA was incubated in the presence of molecules containing hydroxyl groups or certain proteins, such as casein, no adsorption was observed. This suggests limited interaction with functional groups such as amino, hydroxide, and carboxyl groups present in these molecules, indicating the potential application of the polymer in biocorrosion. 5PIBA forms homogeneous, stable, and electroactive coatings on various substrates, making it a promising and versatile material for electrochemical technologies, and paving the way for future functionalization strategies. Full article

The activation and dissociation of O₂ molecules play a key role in the oxidation of toxic gas molecules and the oxygen reduction reaction (ORR) in hydrogen–oxygen fuel cells. The interactions between O₂ molecules and the surfaces of Fe-doped γ-graphyne were systematically explored, mainly adopting the combined method of the density functional theory with dispersion correction (DFT-D3) and the climbing image nudged elastic band (CI-NEB) method. The order of the formation energy values of these defective systems is E_f(Fe_C2) < E_f(Fe_C1) < E_f(Fe_D1) < E_f(V_C1) < E_f(V_D1) < E_f(V_C2) < E_f(Fe_D2) < E_f(V_D2), which indicates that the process of Fe dopant atoms substituting single-carbon atoms/double-carbon atoms is relatively easier than the formation of vacancy-like defects. The results of ab initio molecular dynamics (AIMD) simulations confirm that the doped systems can maintain structural stability at room temperature conditions. Fe-doped atoms transfer a certain amount of electrons to the adsorbed O₂ molecules, thereby causing an increase in the O-O bond length of the adsorbed O₂ molecules. The electrons obtained by the anti-bonding 2π* orbitals of the adsorbed O₂ molecules are mainly derived from the 3d orbitals of Fe atoms. There is a competitive relationship between the substrate’s carbon atoms and the adsorbed O₂ molecules for the charges transferred from Fe atoms. In the C1 and C2 systems, O₂ molecules have a greater advantage in electron accepting ability compared to the substrate’s carbon atoms. The elongation of O-O bonds and the amount of charge transfer exhibit a positive relationship. More electrons are transferred from Fe-3d orbitals to adsorbed O₂ molecules, occupying the 2π* orbitals of adsorbed O₂ molecules, further elongating the O-O chemical bond until it breaks. The dissociation process of adsorbed O₂ molecules on the surfaces of GY-Fe systems (C2 and D2 sites) involves very low energy barriers (0.016 eV for C2 and 0.12 eV for D2). Thus, our studies may provide useful insights for designing catalyst materials for oxidation reactions and the oxygen reduction reaction. Full article