Search Results (160)

This paper presents the first hybrid supply modulator (HSM) designed for envelope tracking power amplifiers (ET-PAs) in base station applications. The focus is on a rail-to-rail Class-AB linear amplifier (LA) optimized for high-voltage and wide-bandwidth operation. The LA is designed using 130 nm BCD technology, utilizing Laterally Diffused Metal-Oxide Semiconductor (LDMOS) transistors for high-voltage operation and incorporating shielding MOSFETs to protect the low-voltage devices. The circuit utilizes dual power supply domains (5 V and 30 V) to improve power efficiency. The proposed LA achieves a bandwidth of 100 MHz and a slew rate of +1003/−852 V/$\mathsf{\mu }\mathrm{s}$, with a quiescent power consumption of 0.89 W. Transient simulations using a 50 MHz bandwidth 5G NR envelope input demonstrate that the proposed HSM achieves a power efficiency of 83%. Consequently, the proposed HSM supports high-output (100 W) wideband 5G NR transmission with enhanced efficiency. Full article

The inter-shaft bearing is an important component of aero-engine rotor systems. It works between a high-pressure rotor and a low-pressure rotor. Effective fault diagnosis of it is significant for an aero-engine. The casing vibration signals can promptly and intuitively reflect changes in the operational health status of an aero-engine’s support system. However, affected by a complex vibration transmission path and vibration of the dual-rotor, the intrinsic vibration information of the inter-shaft bearing is faced with strong noise and a dual-frequency excitation problem. This excitation is caused by the wide span of vibration source frequency distribution that results from the quite different rotational speeds of the high-pressure rotor and low-pressure rotor. Consequently, most existing fault diagnosis methods cannot effectively extract inter-shaft bearing characteristic frequency information from the casing signal. To solve this problem, this paper proposed the denoised improved envelope spectrum (DIES) method. First, an improved envelope spectrum generated by a spectrum subtraction method is proposed. This method is applied to solve the multi-source interference with wide-band distribution problem under dual-frequency excitation. Then, an improved adaptive-thresholding approach is subsequently applied to the resultant subtracted spectrum, so as to eliminate the influence of random noise in the spectrum. An experiment on a public run-to-failure bearing dataset validates that the proposed method can effectively extract an incipient bearing fault characteristic frequency (FCF) from strong background noise. Furthermore, the experiment on the inter-shaft bearing of an aero-engine test platform validates the effectiveness and superiority of the proposed DIES method. The experimental results demonstrate that this proposed method can clearly extract fault-related information from dual-frequency excitation interference. Even amid strong background noise, it precisely reveals the inter-shaft bearing’s fault-related spectral components. Full article

In this study, an accurate attenuation measurement system with high attenuation capability (≥100 dB) is presented, covering a broad radio frequency range from 1 GHz to 25 GHz. The system employs a dual-channel intermediate frequency (IF) substitution method, utilizing a programmable inductive voltage divider (IVD) that provides precise voltage ratios at a 1 kHz operating IF, serving as the primary attenuation standard. To ensure optimal inter-channel isolation, essential for accurate high-attenuation measurements, an optical fiber assembly, consisting of a laser diode, a wideband external electro-optic modulator, and a photodetector, is integrated between the channels. A comprehensive performance evaluation is presented, with particular emphasis on the programmable IVD calibration technique, which achieves an accuracy better than 0.001 dB across all attenuation levels, and on the role of the optical fiber assembly in enhancing isolation, demonstrating levels exceeding 120 dB across the entire frequency range. The system demonstrates measurement capabilities with expanded uncertainties (k = 2) of 0.004 dB, 0.008 dB, and 0.010 dB at attenuation levels of 20 dB, 60 dB, and 100 dB, respectively. Full article

This article presents the design and evaluation of a compact-sized antenna targeting heterogenous applications working in the C-band, 5G-sub-6GHz, and the ISM band. The antenna offers frequency reconfigurability along with multi-operational modes ranging from wideband to dual-band and tri-band. A compact-sized antenna is designed initially to cover a broad bandwidth that ranges from 4 GHz to 7 GHz. Afterwards, various multiband antennas are formed by loading various stubs. Finally, the wideband antenna along with multi-stub loaded antennas are combined to form a single antenna. Furthermore, PIN diodes are loaded between the main radiator and stubs to activate the stubs on demand, which consequently generates various operational modes. The last stage of the design is optimization, which helps in achieving the desired bandwidths. The optimized antenna works in the wideband mode covering the C-band, Wi-Fi 6E, and the ISM band. Meanwhile, the multiband modes offer the additional coverage of the LTE, LTE 4G, ISM lower band, and GSM band. The various performance parameters are studied and compared with measured results to show the performance stability of the proposed reconfigurable antenna. In addition, an in-depth literature review along with comparison with proposed antenna is performed to show its potential for targeted applications. The utilization of FR4 as a substrate of the antenna along with its compact size of 15 mm × 20 mm while having multiband and multi-mode frequency reconfigurability makes it a strong candidate for present as well as for future smart devices and electronics. Full article

The growing demand for high-speed and high-capacity wireless communication has intensified the need for compact, wideband, and efficient MIMO antenna systems, particularly for 5G mid-band and UWB applications. This article presents a miniaturized dual and quad port MIMO antenna design optimized for 5G mid-band (n77/n78/n79/n96/n102) and Ultra-Wideband (UWB) applications without employing any decoupling structures between the radiating elements. The 2-port configuration features two closely spaced symmetric monopole elements (spacing < λ_max/2), promoting efficient use of space without degrading performance. An FR4 substrate (εr = 4.4) is used for fabrication with a compact size of 30 × 41 × 1.6 mm³. This layout is extended orthogonally and symmetrically to form a compact quad-port variant with dimensions of 60 × 41 × 1.6 mm³. Both designs offer a broad operational bandwidth from 2.6 GHz to 10.8 GHz (8.2 GHz), retaining return loss (S_XX) below −10 dB and strong isolation (S_XY < −20 dB at high frequencies, <−15 dB at low frequencies). The proposed MIMO antennas demonstrate strong performance and excellent diversity characteristics. The two-port antenna achieves an average envelope correlation coefficient (ECC) of 0.00204, diversity gain (DG) of 9.98 dB, and a mean effective gain difference (MEG_ij) of 0.3 dB, with a total active reflection coefficient (TARC) below −10 dB and signal delay variation under 0.25 ns, ensuring minimal pulse distortion. Similarly, the four-port design reports an average ECC of 0.01432, DG of 9.65 dB, MEG_ij difference below 0.3 dB, and TARC below −10 dB, confirming robust diversity and MIMO performance across both configurations. Full article

The identification of vital signs is becoming increasingly important in various applications, including healthcare monitoring, security, smart homes, and locating entrapped persons after disastrous events, most of which are achieved using continuous-wave radars and ultra-wideband systems. Operating frequency and transmission power are important factors to consider when conducting earthquake search and rescue (SAR) operations in urban regions. Poor communication infrastructure can also impede SAR operations. This study proposes a method for vital sign detection using an integrated sensing and communication (ISAC) system where a unified orthogonal frequency division multiplexing (OFDM) signal was adopted, and it is capable of sensing life signs and carrying out communication simultaneously. An ISAC demonstration system based on software-defined radios (SDRs) was initiated to detect respiratory and heartbeat rates while maintaining communication capability in a typical office environment. The specially designed OFDM signals were transmitted, reflected from a human subject, received, and processed to estimate the micro-Doppler effect induced by the breathing and heartbeat of the human in the environment. According to the results, vital signs, including respiration and heartbeat rates, have been accurately detected by post-processing the reflected OFDM signals with a 1 MHz bandwidth, confirmed with conventional contact-based detection approaches. The potential of dual-function capability of OFDM signals for sensing purposes has been verified. The principle and method developed can be applied in wider ISAC systems for search and rescue purposes while maintaining communication links. Full article

In this paper, we implement a compact switchable bandpass filter on a 50 Ω microstrip line. The proposed structure consists of an input/output stage with one end terminated at 50 Ω, a C-shaped-open loop resonator, and two L-shaped-open loop resonators. The proposed filter operates in four different modes depending on the on/off combination of the five PIN diodes. Each mode includes a dual-band pass filter (DB-BPF) designed for the 1.4 GHz and 5.1 GHz bands, another DB-BPF covering the 2.4 GHz and 4.2 GHz bands, a wideband BPF with a bandwidth ranging from 2 to 4.5 GHz, and an all-pass filter (APF) that allows all frequencies to pass through. The proposed structure is extremely compact because it is implemented on a 50 Ω line without any additional space. Full article

This work presents a novel dual-polarized antenna array tailored for Internet of Things (IoT) applications, specifically designed to operate in the millimeter-wave (mm-wave) spectrum within the frequency range of 30–60 GHz. Leveraging printed ridge gap waveguide (PRGW) technology, the antenna ensures robust performance by eliminating parasitic radiation from the feed network, thus significantly enhancing the reliability and efficiency required by IoT communication systems, particularly for smart cities, autonomous vehicles, and high-speed sensor networks. The proposed antenna achieves superior radiation characteristics through a cross-shaped magneto-electric (ME) dipole backed by an artificial magnetic conductor (AMC) cavity and electromagnetic bandgap (EBG) structures. These features suppress surface waves, reduce edge diffraction, and minimize back-lobe emissions, enabling stable, high-quality IoT connectivity. The antenna demonstrates a wide impedance bandwidth of 24% centered at 30 GHz and exceptional isolation exceeding 40 dB, ensuring interference-free dual-polarized operation crucial for densely populated IoT environments. Fabrication and testing validate the design, consistently achieving a gain of approximately 13.88 dBi across the operational bandwidth. The antenna’s performance effectively addresses the critical requirements of emerging IoT systems, including ultra-high data throughput, reduced latency, and robust wireless connectivity, essential for real-time applications such as healthcare monitoring, vehicular communication, and smart infrastructure. Full article

In the area of microstrip filter design and optimization, deep learning (DL) algorithms have become much more attractive and powerful in recent years. Here, we propose a method to realize the inverse design of passive microstrip filters, applying generative adversarial networks (GANs). The proposed DL-assisted framework is composed of three components, including a compositional pattern-producing network GAN-based graphic generator, a convolution neural network (CNN)-based electromagnetic (EM) response predictor, and a genetic algorithm optimizer. The filter adopts a square patch resonator structure with an irregular-graphic slot and corner-cuts introduced at diagonal positions. By constructing a hybrid model of pixelated patterns in the filter structures and the corresponding EM response S-parameters, we can obtain customized filter solutions with wideband and dual-band magnitude responses in the 3–8 GHz and 1–6 GHz frequency range, respectively. For each inverse design, it cost 3.6 min for executing 1000 iterations, on average. Numerical simulations and experimental results show that the S-parameters of the generated filters are in excellent agreement with the self-defined targets. Full article

The Janus Helmholtz transducer (JHT) is known for high transmission voltage response (TVR) over a wide bandwidth by its dual-resonance characteristics. It is usually required to design matching circuits for wideband power transmission of JHT. However, conventional matching circuit designs can neither easily cover wide bandwidth nor deliver maximum active power to load. To address this limitation, we propose a novel impedance matching circuit design method to maximize overall power transfer efficiency. The method is based on objective functions of both input and load power factors. The proposed method achieves better active power transfer to load than methods using commonly used input power factor alone. To prove feasibility of the proposed method, we consider equivalent circuit models of cable and JHT and adopt a compact matching circuit of resonant components and a coupling capacitor. By considering three JHTs, two power driving systems, and two frequency bands, we show that the proposed method can achieve a significant improvement in active power transfer to load. By conducting experiments of equivalent JHT circuit, cable, and matching circuit, we also show that input power factor increases by 73.2%, while active power delivered to load increases by 2.03 mW with 1 V_rms input voltage. Full article

A wideband high-efficiency circularly polarized (CP) dual-coil antenna array is presented for 60-GHz applications in this letter. The proposed CP dual-coil antenna is composed of a resonant substrate-integrated cavity (SIC) and a pair of centrally symmetrical coils, which are fed differentially by a substrate-integrated waveguide (SIW) coupling slot. A novel sequential rotation feeding technique is introduced to enhance the axial ratio (AR) and impedance bandwidths of both the 2 × 2 subarray and the 4 × 4 array. The proposed feeding network significantly improves radiation efficiency. The measured results of the fabricated prototype indicate that the proposed array achieves an impedance bandwidth of 20.8% (54.6–67.3 GHz) for |S₁₁| ≤ −10 dB, a 3-dB AR bandwidth of 21.5% (54–67 GHz), a high radiation efficiency of 96.6%, and a peak gain reaching 19.3 dBic at 58 GHz. The proposed circularly polarized (CP) antenna element and array design stand out as strong contenders for 60-GHz wireless applications. Full article

A marine cable-conformal dual-band omnidirectional circularly polarized waveguide slot antenna is proposed for L/S-band (1.59–1.84 GHz/2.48–2.55 GHz) maritime satellite systems. Axially symmetric X-shaped slots enable dual-band operation with 14.6% impedance bandwidth (L-band) and axial ratio < 3 dB. A three-stage tapered coaxial feeding network achieves efficient matching (|S11| < −10 dB) across a BeiDou-1 uplink (1.61–1.6265 GHz) and downlink (2.4835–2.5 GHz), delivering 4.1 dBi peak omnidirectional gain at 1.6 GHz. The compact design (radial dimension ≤ 0.25λ) offers robust performance in harsh marine environments with integrated wideband, high-gain, and conformal capabilities. Full article

A short-circuited coupling structure (SCCS) is proposed to obtain a gain-filtering response for dual-polarized antennas. A conventional dipole is designed with two intrinsic radiation nulls. By introducing an SCCS, an additional radiation null is obtained, and the impedance bandwidth of an antenna can be further improved. Based on this design principle, two dual-polarized filtering antennas are designed for 4G and 5G wireless communication devices. The impedance bandwidth of the proposed 4G filtering antenna is 1.63–2.97 GHz (|S11| < −15 dB), with four radiation nulls at 1.1 GHz, 3.25 GHz, 3.5 GHz, and 4.0 GHz. The impedance bandwidth of the proposed 5G filtering antenna is 3.23–4.21 GHz (|S33| < −15 dB), with four radiation nulls at 1.7 GHz, 2.5 GHz, 3 GHz, and 4.6 GHz. Further, the decoupling function of the SCCS on 4G/5G MIMO antenna designs is also discussed. When introducing an SCCS, the port isolation levels of two elements between the 4G and 5G antennas, as well as the adjacent 5G antennas, can be improved by 14 dB and 6 dB, respectively. The port isolation levels of five elements between the 4G and 5G antennas, as well as the adjacent 5G antennas, can be improved by 15.2 dB and 9.5 dB, respectively. This technique could also be a potential candidate for optical antenna designs in optical front-ends and other multi-wavelength fiber lasers with microstructures. Full article

A wideband dual-polarized dielectric resonator antenna (DRA) with gain-filtering response was proposed in this paper. First, a differentially fed, low-profile crossed-DRA was used to obtain orthogonal polarizations with two resonant modes. A radiation null at upper band edge was also generalized. Second, with the introduction of four parasitic patches at the top of the crossed DRA, another resonant mode at lower band was excited, and the bandwidth was greatly expanded. Moreover, the introduction of parasitic patches could also help improve the selectivity of realized gain with another radiation null at the upper band edge. Furthermore, four sequentially rotated shorting coupling structures (SRSCSs) were proposed for the first time to generalize two additional radiation nulls. Finally, a wideband bandpass filtering response of the realized gain with four radiation nulls was obtained. Prototypes of the proposed antennas were fabricated, and the testing results showed that the antenna had a wide operation band of 57.1% from 2.75 GHz to 4.95 GHz with sharp roll-off at the band edge. This technique could also be used in wireless communication devices at millimeter/optical front ends and other multi-wavelength fiber lasers with micro structures. Full article

A dual-band dual-circularly polarized transmitarray antenna (TA) operating in the 28/39 GHz millimeter-wave band is proposed in this article. The TA unit consists of two parts: a broadband linearly polarized (LP) receiving part and a dual-band dual-circularly polarized transmitting part. An over-2-bit phase compensation is achieved by changing the size of the U-shaped slot and the rotation status of the receiving part. A 24 × 24 TA model with an aperture size of 88.8 mm × 88.8 mm is built up by using the proposed units and fed by a wide-band corrugated horn antenna. The simulated results show that the maximum gain of the dual-band dual-circularly polarized TA is 26.28 dBic within the low-band (26.5–29.5 GHz) and 27.4 dBic within the high-band (37–40 GHz). To verify the accuracy of the simulation, a prototype of the proposed TA is fabricated and measured. The measured maximum efficiencies are 53.56% and 42.89% in low and high bands, respectively. The proposed TA covers two bands (28/39 GHz) for fifth generation (5G) millimeter-wave applications. Moreover, it features low cost, high gain, and high efficiency. Full article