Search Results (84)

Windows are a major contributor to energy loss in buildings, particularly in hot climates where solar radiation heat gain significantly increases cooling demand. An ideal energy-efficient window must maintain high visible light transmittance while effectively blocking ultraviolet and near-infrared radiation, presenting a significant challenge for material design. We propose a plasma silica aerogel window utilizing the local surface plasmon resonance effect of plasmonic nanoparticles. This design incorporates indium tin oxide (ITO) nanospheres (for broad-band UV/NIR blocking) and silver (Ag) nanocylinders (targeted blocking of the 0.78–0.9 μm NIR band) co-doped into the silica aerogel. This design achieves a visible light transmittance of 0.8, a haze value below 0.12, and a photothermal ratio of 0.91. Building simulations indicate that compared to traditional glass, this window can achieve annual energy savings of 20–40% and significantly reduce the economic losses associated with traditional glass, providing a feasible solution for sustainable buildings. Full article

UV-cured methacrylated chitosan (MCHIT) hydrogels were achieved in the presence of silanised tellurium-doped silica bioactive glass (BG-Te-Sil) to produce an antimicrobial and osteoconductive scaffold for tissue engineering applications. Methacrylation of chitosan enabled efficient crosslinking, and the curing process was evaluated by means of Fourier-transform infrared spectroscopy (FTIR) and photorheology analyses. Compressive testing on crosslinked hydrogels showed that the silanised, bioactive, doped glass increased the hydrogel’s elastic modulus by up to 200% compared to unreinforced controls. Antibacterial assays against Staphylococcus aureus ATCC 43300 revealed a significant (p < 0.05) reduction in bacterial metabolic activity for hydrogels containing 50 wt% of the Te-doped bioactive glass. In vitro cytocompatibility with human bone-marrow mesenchymal stem cells demonstrated sustained viability and uniform distribution at 72 h (live/dead staining, AlamarBlue). Under H₂O₂-induced oxidative stress, reinforced hydrogels downregulated pro-inflammatory genes (TNF-α, IFN-γ, IL-1β, and PGES-2). These results suggest that the presence of the silanised bioactive glass can significantly enhance mechanical stability, antibacterial properties, and anti-inflammatory responses without affecting cytocompatibility, making these hydrogels promising for tissue engineering applications. Full article

This article analyzes the reactive magnetron sputtering process, using a two-element Zn-Al target, for depositing aluminum-doped zinc oxide (AZO) layers, aimed at transparent electronics. AZO films were deposited on Corning 7059 glass, flexible Corning Willow^® glass and amorphous silica substrates. To optimize the process, the study examined the target surface state across varying argon/oxygen ratios. The gas mixture significantly influenced the Al/Zn atomic ratio in the films, affecting their structural, optical and electrical performance. Films deposited at 80/20 argon/oxygen ratio—near the dielectric mode—showed high light transmission (84%) but high resistivity (47.4·10⁻³ Ω·cm). Films deposited at ratio of 84/16—close to metallic mode—exhibited lower resistivity (1.9·10⁻³ Ω·cm) but reduced light transmission (65%). The best balance was achieved with an 82/18 ratio, yielding high light transmission (83%) and low resistivity (1.4·10⁻³ Ω·cm). These findings highlight the critical role of sputtering atmosphere in tailoring AZO layer properties for use in transparent electronics. Full article

In this paper, an experimental and theoretical study was undertaken to assess the impact of rare-earth co-doping of silica glasses on the light emission under X-rays. To this aim, radioluminescence (RL), phosphorescence (PP), and thermoluminescence (TL) signals of Ce³⁺/Gd³⁺ co-doped silica glasses have been successively measured and combined at different dose rates and irradiation temperatures. The RL response of the weakly co-doped sample was found to be temperature-independent between 273 K and 353 K. This result suggests that, based on this RL response, it is possible to design ionizing radiation sensors independent of the irradiation temperature in the corresponding range. Moreover, a model that considers the electron–hole pair generation, the charge carrier trapping–detrapping, and the electron–hole recombination in the localized and delocalized bands has been developed to reproduce these optical signals. The theoretical model also explains the temperature independence of the RL response between 273 K and 353 K for the weakly co-doped sample and, therefore, the operating principle of an X-ray sensor independent of the irradiation temperature. Full article

Bi-doped glasses and fibers have been widely applied in solid-state and fiber lasers. However, the mechanism underlying near-infrared (NIR) luminescence remains unclear, and Bi-related luminescence centers (BLCs) are prone to alteration during fiber fabrication, making it challenging to achieve high-performance Bi-doped glass fibers. In this work, Bi-, Bi-Al-, and Bi-Ge-doped silica glasses were investigated to elucidate the origin of NIR luminescence. Two broad NIR fluorescence bands were observed in silica glasses, originating from distinct BLCs. The longer-wavelength fluorescence band at 1423 nm, demonstrating sensitivity to Bi doping concentration and homogeneity, is attributed to Bi clusters (aggregates of Bi⁺ ions), whereas the shorter-wavelength emission, independent of Bi concentration, originates from isolated Bi⁺ ions. A vacuum-assisted melting-in-tube method with a single-step heating process was employed to fabricate Bi-doped silica-based glasses and fibers. The fluorescence bands of the fibers remained consistent with those of the precursor glasses, indicating no new BLCs were formed during fiber fabrication. The modulation of fluorescence bands was primarily governed by Bi cluster formation. Suppressing Bi clustering through co-doping with Al/Ge or optimizing fabrication conditions offers an effective route to tailor the fluorescence properties of Bi-doped glasses and fibers. Full article

This study employs advanced structural characterization techniques, including anomalous small-angle X-ray scattering (ASAXS), small-angle X-ray scattering (SAXS), and X-ray photoelectron spectroscopy (XPS), to investigate erbium (Er³⁺)-doped silica-based glass-ceramic thin films synthesized via the sol–gel method. This research examines the SiO₂-TiO₂ and SiO₂-TiO₂-PO_2.5 systems, focusing on the formation, dispersion, and structural integration of Er³⁺-containing nanocrystals within the amorphous matrix under different thermal treatments. Synchrotron radiation tuned to the L_III absorption edge of erbium enabled ASAXS measurements, providing element-specific details about the localization of Er³⁺ ions. The findings confirm their migration into crystalline phases, such as erbium phosphate (EPO) and erbium titanate (ETO). SAXS and Guinier analysis quantified nanocrystal sizes, revealing trends influenced by their composition and heat treatment. Complementary XPS analysis of the Er 5p core-level states provided detailed information on the chemical and electronic environment of the Er³⁺ ions, confirming their stabilization within the crystalline structure. Transmission electron microscopy (TEM) highlighted the nanoscale morphology, verifying the aggregation of Er³⁺ ions into well-defined nanocrystals. The results offer a deeper understanding of their size, distribution, and interaction with the surrounding matrix. Full article

The feasibility of using brick aggregates for the preparation of aluminosilicate “glass-ceramic” forms as a novel cementitious composite capable of immobilizing radioactive elements was examined. Raw brick was initially activated with sodium hydroxide. X-ray diffraction analysis (XRD) confirmed zeolites (Na-A and Na-P), illite, and sand (quartz) as major phases. Thermal analysis showed several successive events: dehydration/dehydroxylation of illite, followed by degradation of illite and zeolites. Upon heating to 1000 °C, scanning electron microscopy and XRD provided evidence of the presence of novel crystalline aluminosilicate forms (analcime and leucite in the form of solid solutions). Then, upon heating to 1150 °C, the thermal process led to the additional formation of mullite and an amorphous silica-rich phase. The latter resulted from silica melting taking place, owing to the involvement of low-melting-point components on sand grains. Alkali-brick particles were then doped with Cs⁺, Rb⁺, Ca²⁺, and Sr²⁺ ions (individually) and subsequently heated at different temperatures. The corrosion resistance of the heated materials was examined in a hydrochloride acid solution. The aim was to highlight (i) the enhanced cationic-immobilization capacity of crystalline aluminosilicate phases embedded inside amorphous silica, and (ii) the role of sand in the creation of brick-based glass ceramics. Full article

During recent years, the optical-fiber-based simultaneous sensing of strain and temperature has attracted increased interest for different applications, e.g., in medicine, architecture, and aerospace. Specialized fiber layouts further enlarge the field of applications at much lower costs and with easier handling. Today, the performance of many sensors fabricated from conventional fibers suffers from cross-sensitivity (temperature and strain) and relatively high interrogation costs. In contrast, customized fiber architectures would make it possible to circumvent such sensor drawbacks. Here, we report on the development of a high-quality coupled-core fiber and its performance for sensors—from the initial fiber layout via elaboration of the preform and fiber up to the sensor evaluation. A compact, high-speed, and cost-effective interrogation unit using such a specialized coupled-core fiber has been designed to monitor reflectivity changes while even being able to distinguish the direction of the force or impact. Several fiber core material techniques and approaches were investigated, which made it possible to obtain a sufficient volume of material for the required fiber core number and a specialized fiber core geometry in terms of core distances and radial refractive index profile, whilst handling the non-symmetrical fiber architectures of such modeled, complex structures and balancing resources and efforts. Full article

This paper presents the results of a detailed theoretical study of the bending properties of original all-glass leakage channel microstructured optical fibers (LC MOFs) over a bending radius range from 3 cm to 11 cm. These LC MOFs contain two layers of fluorine-doped silica glass elements with reduced refractive index, different diameters, and different distances between them. We determined the spatial distributions of the electric field components of different modes in addition to the usual parameters such as effective refractive indices, bending losses, and spatial intensity distributions. A detailed analysis showed that three modes for each polarization have to be considered to correctly calculate the bending losses. Two pairs of these three modes couple in two distinct bending radius ranges, specifically near 3.68 cm and near 5.95 cm, and the mode coupling in these pairs is resonant. The resulting bending losses of the LC MOF for two polarizations are very close to each other and have two maxima at bending radii of 3.68 cm and 5.95 cm. However, the nature of these maxima is not resonant; they are caused by the combined influence of all three modes, each of which has specific dependencies of losses and other parameters on the bending radius that exhibit quasi-resonant behavior near the corresponding bending radii. Full article

Ce³⁺-doped lithium alumino-silicate (Li-Al-Si) scintillating glass was prepared using a melting method and crystallized via heat treatment. X-ray diffraction and transmission electron microscopy confirmed the presence of nanocrystals in the materials. Radioluminescence spectra, obtained by X-ray excitation, and luminescence spectra, obtained by 338 nm excitation, showed that the luminescence intensity increased after crystallization. The glass was combined with pure silica as the inner cladding to fabricate a hybrid fiber core using a melt-in-tube technique. The composition of the fiber core was examined using an electron probe microanalyzer. The glass fiber produced strong blue luminescence under UV excitation. After a micro-crystallizing heat treatment of the hybrid fiber at 850 °C in a reducing atmosphere, a Ce³⁺-doped lithium alumino-silicate glass–ceramic scintillating hybrid fiber was obtained. The nanocrystal structure of the fiber core was examined using micro-Raman spectroscopy. Excitation and luminescence spectra of the hybrid fiber before and after micro-crystallization were measured using microspectrofluorimetry. The results demonstrated that the fiber remained luminous after micro-crystallization. Hence, this work provides a new way to prepare scintillating glass–ceramic hybrid fibers for neutron detection. Full article

In this paper we derived an expression that allows the determination of the thermo-optic coefficient of weakly-guiding germanium-doped silica fibers, based on the thermal behavior of optical fiber devices, such as, fiber Bragg gratings (FBGs). The calculations rely on the full knowledge of the fiber parameters and on the temperature sensitivity of FBGs. In order to validate the results, we estimated the thermo-optic coefficient of bulk GeO₂ glass at 293 K and 1.55 μm to be 18.3 × 10⁻⁶ K⁻¹. The determination of this value required to calculate a correction factor which is based on the knowledge of the thermal expansion coefficient of the fiber core, the Pockels’ coefficients (p₁₁ = 0.125, p₁₂ = 0.258 and p₄₄ = −0.0662) and the Poisson ratio (ν = 0.161) of the SMF-28 fiber. To achieve that goal, we estimated the temperature dependence of the thermal expansion coefficient of GeO₂ and we discussed the dispersion and temperature dependence of Pockels’ coefficients. We have presented expressions for the dependence of the longitudinal and transverse acoustic velocities on the GeO₂ concentration used to calculate the Poisson ratio. We have also discussed the dispersion of the photoelastic constant. An estimate for the temperature dependence of the thermo-optic coefficient of bulk GeO₂ glass is presented for the 200–300 K temperature range. Full article

The development of unique optical materials that provide amplification and lasing in new wavelength ranges is a major scientific problem, the solution of which is becoming the basis for the emergence of new optical technologies, which are primarily targeting the expanding of operating wavelengths in silica glass. In fact, one of the notable advances in the field of fiber optics over the past two decades has been the production of a new type of laser-active fibers (namely bismuth-doped fibers), which has made it possible to cover previously inaccessible (for rare-earth-doped fibers) spectral ranges, in particular O-, E-, S-, and U-telecom bands. The advance in this direction has led to further growth of the technological capabilities in the telecom industry for amplification and generation of optical radiation in various wavelength bands, which will result in the near future to overcoming the problem known as “capacity crunch” by means of expanding the data transmission range. Recently, bismuth-doped fibers have been actively studying in order to improve their characteristics, which would allow for efficient implementation of optical devices based on bismuth-doped fibers (BDFs) with deployed telecommunications systems. This is one of the dynamically developing areas, where progress has already manifested in form of emergence of new achievements, in particular commercially available various types of BDFs, as well as a series of novel fiber-optic amplifiers for the O- and E-bands. In this review, a number of scientific studies that have already led to a noticeable progress in the field of optical properties of BDFs and the practical implementation of optical devices (lasers and amplifiers) based on them are presented and discussed, with much attention to the achievements of recent years. Full article

In order to facilitate waste glass recycling and enable the monitoring of concrete structures, this study prepares a new type of self-sensing engineered cementitious composite (ECC) via the use of glass sand instead of silica sand. The health monitoring of a concrete structure is achieved through the addition of polypropylene (PP) fibers to enhance the flexural toughness of concrete, and adding carbon fibers (CFs) to make the concrete self aware, enabling it to sense the load changes and structural damage. The fiber dosage of ECC is optimized to analyze the effects of different fiber types and dosages on the mechanical and self-sensing properties of concrete. The results show that the hybrid fibers produce a good synergistic effect on mechanical properties, and the presence of excess fibers causes the mechanical properties of concrete to deteriorate. The critical fiber volume fraction required for the strain hardening of PP ranges from 0.75% vol to 1% vol. At different PP dosages, the CF dosage shows a positive correlation with the initial crack strength. By analyzing the effect of varied curing times and CF doping on the initial resistivity, it is found that the threshold value of CF conductivity is 0.7% vol. The role of CFs in the flexural sensitivity and pressure sensitivity tests is explained from the perspective of fiber distribution, and the fiber distribution theory is verified with scanning electron microscopy (SEM). The optimal level of CF doping for flexural sensitivity and pressure sensitivity is determined to be 1.1% vol and 0.7% vol via the use of self-sensing performance tests, respectively. An increase in PP fiber doping leads to a decrease in the initial resistivity and self-sensing properties of the material. The results of this research provide guidance regarding how to determine the optimal fiber dosage flexibly for different engineering works. Full article

Multi-component silica calcium phosphate glasses doped with modifiers of alkaline and transition metal oxides of Mg²⁺, Fe³⁺, and Bi³⁺ were synthesized using the sol-gel method. The glasses were analyzed for structural behavior via XRD analysis. While alkaline metal-doped glasses were purely amorphous, the transition metal oxides induced fractional crystallinity in the material, with bismuth evidencing a high glass–ceramic attribute. FT-IR analysis confirmed the presence of silicate and phosphate linkages in the glass material via the vibration modes around 790 cm⁻¹ and 450 cm⁻¹, respectively. The peaks also represented the bridging and non-bridging oxygens of the glass formers. The UV-visible absorption spectra of the alkaline metal-infused glasses demonstrated the absence of sharp absorption peaks, while the transition metal-doped glasses evidenced prominent UV absorption. Tauc’s plots of the absorption spectra were employed to predict the band gap energies. While the Fe³⁺-doped glass exhibited the lowest band gap energy of 2.6 eV approaching a semiconducting nature, the remaining glasses exhibited an insulating behavior with a value of around 4 eV. The high UV absorption and lower bandgap indicate the suitability of the iron-doped glass for photovoltaic devices. Green and red emissions from all the glasses were observed using photoluminescence analysis. While the emission indicates the nature of the glass host, the intensity of its luminescence was altered by the influence of modifiers. Multi-component silicate glasses underscore the efficiency of the modifiers that could be suitably tailored for influencing the laser activity. Full article

Composite glasses possessing an amorphous nature and high dielectric constants exhibit properties suitable for optoelectronic and electrochemical applications. Multi-component silica–calcium phosphate glasses doped with 0.5 and 1 mol% of trivalent praseodymium (Pr³⁺) were synthesized using the sol-gel method. The Pr³⁺-doped and undoped glasses were compared at room temperature (300 K) to analyze their electrical variations. Dielectric studies predicted an increase in the dielectric constant and conductivity in the doped samples when compared to the undoped glass. A high dielectric constant of 89.2 was observed in the optimally doped glass at 1 kHz. The value of the capacitance increases to the order of nanofarads as the concentration of Pr³⁺ increases, indicating enhanced storage in the material. The AC conductivity of the highly doped sample evidenced a high value of 2.9 × 10⁻⁵ S/cm at 10 MHz. The Cole–Cole plot of the glasses demonstrated a single flattened semicircle due to the lack of grains. The equivalent circuitry constitutes a constant-phase element (CPE) in series with the parallel circuit of a resistor and CPE. This behavior is indicative of the suitability of the glasses as cathodes. The increase in capacitance with doping in the low-frequency region suggests the use of the glasses as dielectric energy-storage materials in condensers. Full article