Search Results (530)

Electrospun nanofibrous membranes have gained considerable attention in bone tissue engineering due to their ability to mimic the extracellular matrix and provide a suitable environment for cell attachment and proliferation. This study investigates the fabrication, characterization, and biocompatibility of poly(L-lactic acid) (PLA)-based membranes enhanced with periclase (MgO) and gold nanoparticles (AuNPs). The membranes were fabricated using an optimized electrospinning process and subsequently characterized using scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), Fourier-transform infrared spectroscopy (FT-IR), and contact angle measurements. Additionally, in vitro biodegradation studies in simulated body fluid (SBF) and cytocompatibility tests with osteoblast-like cells were conducted. The results demonstrated that the incorporation of MgO and AuNPs significantly influenced the structural and chemical properties of the membranes, improving their wettability and bioactivity. SEM imaging confirmed uniform fiber morphology with well-distributed nanoparticles. FT-IR spectroscopy indicated successful integration of bioactive components into the PLA matrix. Cytocompatibility assays showed that modified membranes promoted higher osteoblast adhesion and proliferation compared to pristine PLA membranes. Furthermore, biodegradation studies revealed a controlled degradation rate suitable for guided bone regeneration applications. These findings suggest that electrospun PLA membranes enriched with MgO and AuNPs present a promising biomaterial for GBR applications, offering improved bioactivity, mechanical stability, and biocompatibility. Full article

Background/Objectives: The functionalization of various forms of graphene, such as graphene nanoplatelets, graphene oxide, and reduced graphene oxide, in biomaterials is a promising strategy in dentistry, particularly regarding their antimicrobial potential. However, conclusive studies on the toxicity and biocompatibility of graphene-based materials remain limited, and standardized guidelines for their production, handling, and dental applications are still lacking. This scoping review aims to map the available studies on various types of graphene, synthesize evidence on their antimicrobial effectiveness, and describe the main biological responses when functionalized in dental biomaterials. Methods: An electronic search was conducted in the Clarivate, PubMed, and Scopus databases using the descriptors as follows: ‘graphene’ AND ‘antimicrobial effect’ AND ‘bactericidal effect’ AND (‘graphene oxide’ OR ‘dental biofilm’ OR ‘antibacterial properties’ OR ‘dental materials’). Article screening and eligibility assessment were performed based on predefined inclusion and exclusion criteria, following the PRISMA-ScR guidelines. Results: The search identified 793 articles. After removing duplicates, applying the eligibility criteria, and performing a full-text analysis of 64 articles, 21 studies were included in the review. Graphene oxide, particularly at low concentrations, was the most commonly studied graphene variant, demonstrating significant antimicrobial efficacy against S. mutans, S. faecalis, E. coli, P. aeruginosa, and C. albicans. Both mechanical and chemical mechanisms have been linked to the biological responses of graphene-doped biomaterials. The biocompatibility and cytotoxicity of these compounds remain controversial, with some studies reporting favorable outcomes, while others raise significant concerns. Conclusions: Graphene shows great promise as an antimicrobial agent in dental biomaterials. Despite encouraging results, more in vitro and in vivo studies are needed to better understand its biocompatibility and cytotoxicity in dental applications. Additionally, standardized production protocols, clearly defined clinical applications in dentistry, and regulatory guidelines from the World Health Organization concerning handling procedures and occupational risks remain necessary. Full article

This research focuses on designing polymer membranes as biocompatible materials using home-built electrospinning equipment, offering alternative solutions for tissue regeneration applications. This technological development supports cell growth on biomaterial substrates, including hepatocellular carcinoma (Hep-G2) cells. This work researches the compatibility of polymer membranes (fiber mats) made of polyvinylidene difluoride (PVDF) for possible use in cellular engineering. A standard culture medium was employed to support the proliferation of Hep-G2 cells under controlled conditions (37 °C, 4.8% CO₂, and 100% relative humidity). Subsequently, after the incubation period, electrochemical impedance spectroscopy (EIS) assays were conducted in a physiological environment to characterize the electrical cellular response, providing insights into the biocompatibility of the material. Scanning electron microscopy (SEM) was employed to evaluate cell adhesion, morphology, and growth on the PVDF polymer membranes. The results suggest that PVDF polymer membranes can be successfully produced through electrospinning technology, resulting in the formation of a dipole structure, including the possible presence of a polar β-phase, contributing to piezoelectric activity. EIS measurements, based on R_ct and C_dl values, are indicators of ion charge transfer and strong electrical interactions at the membrane interface. These findings suggest a favorable environment for cell proliferation, thereby enhancing cellular interactions at the fiber interface within the electrolyte. SEM observations displayed a consistent distribution of fibers with a distinctive spherical agglomeration on the entire PVDF surface. Finally, integrating piezoelectric properties into cell culture systems provides new opportunities for investigating the influence of electrical interactions on cellular behavior through electrochemical techniques. Based on the experimental results, this electrospun polymer demonstrates great potential as a promising candidate for next-generation biomaterials, with a probable application in tissue regeneration. Full article

Segregative phase separation technology demonstrates substantial potential for precise molecular fractionation in food and biomaterial applications. The investigation elucidates the causal relationship between viscosity variations and phase separation dynamics, which govern molecular fractionation in GA/HPMC composite systems. By conducting a comparative analysis of two GA subtypes (CGA and SGA) and three HPMC grades with controlled viscosity gradients, we utilized gel permeation chromatography-multi-angle laser light scattering (GPC-MALLS) coupled with rheological characterization to elucidate the critical relationship between continuous phase viscosity and fractionation efficiency. Notably, increasing HPMC viscosity significantly intensified phase separation, resulting in selective enrichment of arabinogalactan-protein complexes: from 6.3% to 8.5% in CGA/HPMC systems and from 27.3% to 36.5% in SGA/HPMC systems. Further mechanistic investigation revealed that elevated HPMC viscosity enhances thermodynamic incompatibility while slowing interfacial mass transfer, synergistically driving component redistribution. These findings establish a quantitative viscosity–fractionation relationship, offering theoretical insights for optimizing GA/HPMC systems in emulsion stabilization, microencapsulation, and functional biopolymer purification via viscosity-mediated phase engineering. Full article

Photobiomodulation (PBM) has been widely studied for its regenerative and anti-inflammatory properties. Its application, combined with biomaterials, is emerging as a promising strategy for promoting tissue regeneration. Considering the diversity of available evidence, this study conducted an integrative literature review, aiming to critically analyze and synthesize the effects of PBM on bone tissue, particularly its potential role as an adjunct in guided bone regeneration (GBR) procedures. To ensure an integrative approach, studies with different methodological designs were included, encompassing both preclinical and clinical research. The article search was performed in the digital databases PubMed/MEDLINE, Scopus, and Web of Science, using the following search terms: “Photobiomodulation therapy” AND “guided bone regeneration”. The search was conducted from November 2024 to January 2025. A total of 85 articles were found using the presented terms; after checking the results, 11 articles were selected for this study. The remaining articles were excluded because they did not fit the proposed inclusion and exclusion criteria. Studies to date have shown preclinical models that demonstrated increased bone-volume fraction and accelerating healing. Although it has exciting potential in bone regeneration, offering a non-invasive and promising approach to promote healing and repair of damaged bone tissue, the clinical application of PBM faces challenges, such as the lack of consensus on the ideal treatment parameters. Calcium phosphate ceramics were one of the most used biomaterials in the studied associations. Further well-designed studies are necessary to clarify the effectiveness, optimal parameters, and clinical relevance of PBM in bone regeneration, in order to strengthen the current evidence base and guide its potential future use in clinical practice. Full article

Background and Objectives: The aim of this study is to categorize and combine (according to the source of biomaterial) biomarkers of frailty syndrome and identify challenges in research on these biomarkers by reviewing the current literature from the past five years. Methods: We systematically searching five electronic databases—PubMed, Scopus, Web of Science, CINAHL, and the Cochrane Library—for citations from 1 January 2019 to 1 July 2024. We conducted a qualitative data synthesis and categorized the limitations by topics and subtopics. PROSPERO—CRD: 42024491369. Results: A total of 61 papers met the criteria for inclusion in this study. These studies included a total of 56,758 participants, and 1479 unique biomarkers. We categorized biomarkers such as blood, genetic, urinary, and salivary biomarkers. Our analysis identified three major categories of challenges: challenges related to study design, unclear pathophysiological mechanisms, and biomarker-specific challenges. Conclusions: This review underscores the extensive research into biomarkers associated with frailty syndrome, such as blood, genetic, urinary, and salivary biomarkers. However, significant challenges persist, including methodological inconsistencies, biomarker measurement variability, and a limited understanding of underlying mechanisms. Full article

Herein, electrospun nanofibers composed of polyaniline (PANI), polyethylene oxide (PEO), and Luffa cylindrica (LC) cellulose, reinforced with titanium dioxide (TiO₂) nanoparticles, were synthesized via electrospinning to investigate the effect of TiO₂ nanoparticles on PANI/PEO/LC nanocomposites and the effect of conductivity on nanofiber morphology. Cellulose extracted from luffa was added to the PANI/PEO copolymer solution, and two different ratios of TiO₂ were mixed into the PANI/PEO/LC biocomposite. The morphological, vibrational, and thermal characteristics of biocomposites were systematically investigated using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). As anticipated, the presence of TiO₂ enhanced the electrical conductivity of biocomposites, while the addition of Luffa cellulose further improved the conductivity of the cellulose-based nanofibers. FTIR analysis confirmed chemical interactions between Luffa cellulose and PANI/PEO matrix, as evidenced by the broadening of the hydroxyl (OH) absorption band at 3500–3200 cm⁻¹. Additionally, the emergence of characteristic peaks within the 400–1000 cm⁻¹ range in the PANI/PEO/LC/TiO₂ spectra signified Ti–O–Ti and Ti–O–C vibrations, confirming the incorporation of TiO₂ into the biocomposite. SEM images of the biocomposites reveal that the thickness of nanofibers decreases by adding Luffa to PANI/PEO nanofibers because of the nanofibers branching. In addition, when blending TiO₂ nanoparticles with the PANI/PEO/LC biocomposite, this increment continued and obtained thinner and smother nanofibers. Furthermore, the incorporation of cellulose slightly improved the crystallinity of the nanofibers, while TiO₂ contributed to the enhanced crystallinity of the biocomposite according to the XRD and DCS results. Similarly, the TGA results supported the DSC results regarding the increasing thermal stability of the biocomposite nanofibers with TiO₂ nanoparticles. These findings demonstrate the potential of PANI/PEO/LC/TiO₂ nanofibers for advanced applications requiring conductive and structurally optimized biomaterials, e.g., for use in humidity or volatile organic compound (VOC) sensors, especially where flexibility and environmental sustainability are required. Full article

Honey, propolis or royal jelly are considered natural remedies with therapeutic properties since antiquity. Many papers explore the development of antimicrobial biomaterials based on individual bee products, but there is a lack of studies on their synergistic effects. Combining honey, propolis and royal jelly with silver nanoparticles in a biopolymer matrix offers a synergistic strategy to combat antibiotic-resistant bacterial infections. This approach supports progress in wound healing, soft tissue engineering and other domains where elimination of the microorganisms is needed like food packaging. In this study we have obtained antimicrobial films based on bee products and silver nanoparticles (AgNPs) incorporated in an alginate–chitosan blend. The novel biomaterials were analyzed by UV-Vis, fluorescence and FTIR spectroscopy or microscopy, SEM and thermal analysis. Antibacterial tests were conducted against both Gram-positive and Gram-negative bacteria, while the antifungal properties were tested against Candida albicans. The diameters for growth inhibition zones were up to 10 mm for bacterial strains and 8 mm for the fungal strain. Additionally, cytotoxicity assays were performed to evaluate the biocompatibility of the materials, the results indicating that the combination of honey, propolis, royal jelly and AgNPs does not produce synergistic toxicity. Full article

Implantable cardiac devices are critical in improving patients’ quality of life through precise and continuous interaction between the device and pathological cardiac tissue. Due to the inherently rigid nature of conventional devices, several complications arise when interacting with soft cardiac tissue, caused by a mechanical mismatch between the device and myocardium. This leads to the excessive formation of fibrous tissue around the implanted device, ultimately compromising both device functionality and tissue health. To address these challenges, flexible electronics based on polymers and elastomers significantly softer than conventional rigid metals and silicon have been explored. The epicardial approach enables the device to conform to the curved myocardial surface and deform synchronously with cardiac motion, thereby improving mechanical compatibility. However, modulus mismatches between soft polymers and cardiac tissue can still lead to mechanical instability and non-uniform adhesion, potentially affecting long-term performance. This review comprehensively summarizes recent research advancements in epicardial patch electronics based on bioadhesive and conductive hydrogels. We emphasize current research directions, highlighting the potential of hydrogels in epicardial electronics applications. Critical discussion includes recent trends, ongoing challenges, and emerging strategies aimed at improving the properties of hydrogel-based epicardial patches. Future research directions to facilitate clinical translation are also outlined. Full article

Hydrogels have immense potential in soft electronics due to their similarity to biological tissues. However, for applications in fields like tissue engineering and wearable electronics, hydrogels must obtain electrical conductivity, stretchability, and implantability. This article explores recent advancements in the development of electrically conductive hydrogel composites with high conductivity, low Young’s modulus, and remarkable stretchability. By incorporating conductive particles into hydrogels, such as poly(3,4-ethylenedioxythiophene)/poly (styrenesulfonate) (PEDOT/PSS) researchers have enhanced their conductivity. This study presents a one-pot synthesis method for creating electrically conductive hydrogel composites by combining PEDOT/PSS with alginate. The hydrogel reveals changes in chemical composition upon treatment with dimethyl sulfoxide (DMSO). Additionally, surface morphology analysis via Field Emission Scanning Electron Microscopy (FESEM) and Atomic Force Microscopy (AFM) demonstrate the impact of DMSO treatment on PEDOT/PSS/alginate films. Furthermore, electrical conductivity measurements highlighted the effectiveness of the conductive hydrogels in Electromyography (EMG) and human motion detection. This study offers insights into the fabrication and characterization of stretchable, conductive hydrogels, advancing their potential for various soft sensing biomedical applications. The optimized PDOT/PSS/alginate composite under dry condition shows a conductivity of 0.098 S/cm and can be stretched without significant loss in conductivity or mechanical stability. This one-pot method provides a simple and effective way to improve the properties of conductive hydrogel-based sensors. Full article

Background and Objectives: Periodontitis is an inflammatory disease that compromises the supporting structures of the teeth, leading to irreversible tissue damage and tooth loss. While subgingival professional mechanical plaque removal (PMPR) remains the gold standard treatment, there is increasing interest in adjunctive therapies. Platelet-rich fibrin (PRF) has gained attention as a promising biomaterial to enhance periodontal healing and regeneration. This study aimed to evaluate the clinical and immunological effectiveness of PRF as an adjunct to PMPR. Materials and Methods: Clinical studies published between January 2019 and August 2024 were included from the ProQuest, PubMed, PMC, ScienceDirect, Scopus, and EBSCO databases. Seven studies met the inclusion criteria, focusing on adults with periodontitis treated with PRF + PMPR compared to PMPR alone. Primary outcomes included changes in clinical and immunological parameters. Risk of bias was assessed using the Cochrane ROB2 tool. Meta-analysis was conducted using both fixed-effect and random-effects models, depending on heterogeneity. Results: The meta-analysis demonstrated significant improvements in clinical outcomes in the PRF + PMPR group, with reductions in probing pocket depth (SMD: −1.43 mm; 95% CI: −2.05 to −0.81; p < 0.00001), clinical attachment level (SMD: −1.34 mm; 95% CI: −1.95 to −0.73; p < 0.0001), bleeding on probing (SMD: −0.75 mm; 95% CI: −1.11 to −0.39; p < 0.00001), gingival recession (SMD: −0.79 mm; 95% CI: −1.33 to −0.25; p = 0.004), and gingival index (SMD: −0.82 mm; 95% CI: −1.37 to −0.28; p = 0.003). Favorable trends were also observed in IL-10, TGF-β, VEGF, PDGF-BB, periostin, and type I collagen levels. Conclusions: PRF enhances clinical and immunological outcomes and supports periodontal tissue stability when used as an adjunct to non-surgical therapy. Full article

The growing demand for sustainable materials has led to innovation in the development of natural compound-based solutions for industrial applications. This study introduces composite nanoparticles (NP-CsYBE) synthesized from chitosan (Cs) and saponin-rich yucca extract (YBE), highlighting their application in Pickering emulsions (PE). Characterization via DLS and AFM revealed NP-CsYBE as spherical particles with a hydrodynamic diameter of 230 nm and a ζ-potential of +36.9 mV, showing a non-aggregated morphology. Comparative analyses of emulsions formulated with Cs nanoparticles (Cs-NP) and YBE were conducted to assess the individual contributions of each component. Functional evaluations revealed that PE based on NP-CsYBE exhibited superior stability over time compared to those with Cs-NP or YBE alone. Additionally, the rheological properties of NP-CsYBE PE were influenced by pH: liquid-viscous behavior dominated at pH 4, while at pH 6.5, solid-elastic properties prevailed. Notably, increased temperature enhanced its mechanical properties. This innovative approach provides a framework for applying natural nanoparticles in PE formation, offering potential applications in the pharmaceutical, food, medical, and cosmetic industries, as well as biomaterials for protecting lipophilic substances. By leveraging natural resources, this work advances the understanding of natural nanoparticle-based systems and their role in developing sustainable and functional materials for industrial use. Full article

Adhesion between Schwann cells (SCs, a type of glial cell in the peripheral nervous system) and their underlying substrates is a fundamental process that holds critical importance for the proper functioning of the peripheral nervous system. Conducting further in-depth research into the adhesion mechanisms of nerve cells is of paramount significance, as it can pave the way for the development of highly effective biomaterials and facilitate the repair of nerve injuries. Thyroid Receptor Interaction Protein 6 (TRIP6), a member of the ZYXIN family of LIM domain-containing proteins, serves as a key component of focal adhesions. It plays a pivotal role in regulating a diverse array of cellular responses, including the reorganization of the actin cytoskeleton and cell adhesion. Accumulated data indicate that RSC96 cells (rat Schwann cells), which are rat Schwann cells, exhibit integrin-based mechanosensitivity during the initial phase of adhesion, specifically within the first 24 h. This enables the cells to sense and respond to alterations in matrix stiffness. The results of immunofluorescence staining experiments revealed intriguing findings. An increase in matrix stiffness not only led to significant changes in the morphological parameters of RSC96 ells, such as circularity, aspect ratio, and cell spreading area, but also enhanced the expression levels of TRIP6, focal adhesion kinase (FAK), and vinculin within these cells. These changes collectively promoted the adhesion of RSC96 cells to the matrix. Furthermore, when TRIP6 expression was silenced in RSC96 cells cultured on hydrogels, a notable decrease in the expression of both FAK and vinculin was observed. This, in turn, had a detrimental impact on cell adhesion. In summary, the present study strongly suggests that TRIP6 may play a crucial role in promoting the adhesion of RSC96 cells to polyacrylamide hydrogels with varying stiffness. This research not only offers a fresh perspective on the study of the integrin-mediated force regulation of cell adhesion but also lays a solid foundation for potential applications in tissue engineering, regenerative medicine, and other related fields. Full article

Objective: This study aimed to compare the efficacy of Sticky Tooth (ST) derived from ground teeth and Sticky Bone (SB) based on equine bone and human allograft in maxillary bone defect regeneration through histological examination. Materials and Methods: Forty patients underwent maxillary alveolar ridge regeneration using four different biomaterials: Sticky Tooth processed with the BonMaker device (n = 10), Sticky Tooth prepared with the Smart Dentin Grinder (n = 10) Sticky Bone derived from an equine xenograft (n = 10), and Sticky Bone derived from human allografts (n = 10). CBCT imaging was performed preoperatively, post-regeneration, and during follow-up. Histological and quantitative statistical evaluation was conducted on biopsy samples obtained four months post-regeneration at the time of implant placement. Results: Successful alveolar ridge regeneration was achieved in all 40 patients. Histological analyses confirmed good integration between the biomaterials and bone tissue without signs of inflammation. Conclusion: Histological comparisons demonstrated that both ST and SB are effective biomaterials for bone regeneration. However, ST exhibited a faster bone healing process compared to xenograft and allograft SB. Full article

This study investigated the chemical, thermal, and mechanical properties of segmented polyurethanes (SPUs) synthesized using less common biodegradable polyester polyols, specifically poly(adipate) (PAD) and poly(sebacate) (PSC), to evaluate their potential as nerve guidance conduits (NGCs) in peripheral nerve regeneration. The synthesis of novel 4,4′ methylene-bis-cyclohexyl diisocyanate (HMDI) SPUs was conducted in a two-step process: prepolymer formation and chain extension with 1,4-butanediol (BO) or 1,4-butanediamine (BA). SPUs were synthesized with two molar ratios—polyol:HMDI:BA/BO at 1:2:1 and 1:3:2 for the PAD:HMDI:BA system—to optimize mechanical properties. 1HRMN analysis verified the expected chemical structure of SPUs, whereas Raman and IR spectroscopy confirmed successful polyurethane synthesis. X-ray diffractograms showed that PAD-based SPUs (SPUPAD) were amorphous while PSC-based SPUs (SPUPSC) exhibited semi-crystalline behavior. SPUPAD showed only one degradation stage by TGA, while DSC showed one thermal event. In contrast, SPUPSC exhibited two degradation stages and three thermal events that confirmed phase separation. The longitudinal tensile properties of an NGC fabricated from SPUA-PAD-2 (PAD:HMDI:BA (1:3:2)) after 30 days of immersion in water (25 °C) showed a lower modulus (4.46 ± 0.5 MPa) than native intact nerves (15.87 ± 2.21 MPa) but a similar modulus to extracted nerves (8.19 ± 7.27 MPa). This system exhibited a longitudinal tensile force of 11.1 ± 1.6 N, which is lower than that of peripheral nerves (19.85 ± 7.21 N) but higher than that of commercial collagen-based nerve guide conduits (6.89 ± 2.6 N). The observed properties suggest that PUA-PAD-2 has potential as a biomaterial for nerve regeneration applications. Full article