Search Results (34)

Swim bladders in some teleost fish can act as gas-filled cavities that oscillate under acoustic pressure and transfer the sound energy to the inner ears. Quantifying the resonance frequency and damping of these oscillations is useful for linking swim bladder mechanics to hearing-related and behavioural questions, but many established direct-measure approaches have relied on open-water deployments and careful avoidance of boundary reflections, making experiments logistically demanding and difficult to reproduce (e.g., requiring deep-water sites, careful control of surface/boundary reflections, and complex deployment geometries). This study presents a compact laboratory methodology for estimating swim bladder resonance properties using a closed, fully water-filled, stainless-steel impedance tube. Broadband pseudorandom excitation is applied via an end-plate shaker, and the acoustic response of the system is recorded using wall-mounted hydrophones. Resonance peaks are identified using power spectral estimates of recorded signals, allowing resonance frequency and quality factor to be extracted from the peak location and −3 dB bandwidth. The approach is first established using inflated latex balloons as surrogate encapsulated gas cavities, providing a controlled benchmark for repeatability and interpretation. It is then applied to recently euthanised brown trout (Salmo trutta), where clear resonance features attributable to the swim bladder are observed and show systematic variation with body size. A coupled finite element model reproduces the principal resonance behaviour under the experimental loading and supports interpretation of the measured peaks as swim bladder resonance. The results provide a validated foundation for subsequent non-invasive measurements on live, free-swimming fish, as well as for future applications where swim bladder condition may be relevant to management or conservation. Full article

InSAR technology effectively monitors urban subsidence and evaluates the stability of infrastructure across extensive regions. Atmospheric tropospheric delay constitutes a significant source of error that adversely impacts the accuracy of InSAR deformation measurements. The meteorological conditions in the highland basin region are complex, and there is a notable deficiency of sufficient sounding balloon observations. This study replaces the sounding balloon data in the power-law model with ERA-5 data (PLE5) to correct the InSAR atmosphere phase delay. This method was tested in Dali utilizing Sentinel-1 data. By comparing its performance against the GACOS model, traditional linear model, and ERA-5 correction, the PLE5 model exhibited the lowest phase standard deviation. This method provides an alternative approach for applying the power-law model in regions with limited sounding balloon data, enhancing the accuracy of InSAR tropospheric delay correction. Full article

Airborne wind measurement is of great significance for understanding atmospheric motion and meteorological monitoring. In this paper, we present the development and verification of an airborne Doppler wind lidar (ADWL), featuring an approach proposed to integrate a real-time wind retrieval method with an intelligent processing method for automatic adaptive wind detection. Several verification experiments were conducted to evaluate the measurement effectiveness, including comparisons with a calibrated ground-based Doppler wind lidar (GDWL) and a sounding balloon. Compared with the sounding balloon, the ADWL demonstrated mean errors of 0.53 m/s for horizontal wind velocity and 4.60° for wind direction. The correlation coefficients consistently exceeded 0.98 in all linear analyses. Employed in multiple airborne wind detection events in North China at altitudes up to 6600 m, the ADWL provided effective wind field results with a vertical resolution of 50 m and a data rate of 2 Hz. The wind field results obtained during the detection events validate the ADWL’s capabilities in diverse environments and underscore its potential for the comprehensive detection of meteorological information. Full article

Stable boundary layer height (SBLH) is an important parameter to characterize the characteristics and vertical structure of the nocturnal lower atmosphere at night. The distribution of SBLH has obvious spatial and temporal differences, and there are many meteorological factors affecting the SBLH, but at present, there are few quantitative studies on the effects of near-surface meteorological factors on the SBLH in the desert hinterland. This study was based on GPS sounding balloon data, near-surface meteorological observation data, and ERA5 data from Tazhong Station (TZ) in the Taklamakan Desert (TD) collected in July 2017, 2019, and 2021. The variation characteristics of the SBLH and its relationship with near-surface meteorological factors are described. We quantitatively analyzed the degree of influence of near-surface meteorological factors affecting the SBLH and verified it using a model. The study also elucidates the possible formation mechanism of the SBLH in the TD hinterland. The SBLH in the TD hinterland trended upward in July 2017, 2019, and 2021, which is consistent with the changes in meteorological factors, according to the near-surface meteorological observation and ERA5 data. Therefore, we think that an inherent connection exists between near-surface meteorological factors and the SBLH. The results of correlation analysis show that complex internal connections and interactions exist among the meteorological factors near the ground; some thermal, dynamic, and other meteorological factors strongly correlate with the SBLH. Having established the change in SBLH (ΔSBLH) and in major thermal, dynamic, and other meteorological factors (Δ), the linear regression equation between them revealed that near-surface meteorological factors can affect the SBLH. The dynamic factors have a stronger influence on the ΔSBLH than thermal and other factors. The results of model validation based on the variable importance projection (VIP) also confirmed that the SBLH in the TD hinterland is jointly affected by dynamic and thermal factors, but the dynamic factors have a stronger impact. The mechanism through which the SBLH forms is relatively complex. At night, surface radiative cooling promotes the formation of a surface inversion layer, and low-level jets strengthen wind shear, reducing atmospheric stability. The combined effects of heat and dynamics play an important role in dynamically shaping the SBLH. This study helps us with accurately predicting and understanding the characteristics of the changes in and the factors influencing the SBLH in the TD hinterland, providing a reference for understanding the mechanism through which the SBLH forms in this area. At the same time, it provides a scientific basis for regional weather and climate simulation, meteorological disaster defense, air quality forecasting, and model parameterization improvement. Full article

This study aims to elucidate the influence of meteorological conditions on particle levels in Cergy-Pontoise. It explores the temporal variability of PM10 pollution days by associating them with the vertical temperature profile derived from conventional radiosondes from 2013 to 2022 (regional station). The results indicate that nearly 80% of exceedance days were associated with thermal inversions, primarily observed in winter and typically lasting 1 to 3 days. Analysis of winter thermal inversion characteristics suggests that those linked to pollution primarily occur near the ground, with higher intensity in December (12.1 °C) and lower in February (10.3 °C). Persistent inversions (extended nocturnal by diurnal inversion) account for 91.4% of the total inversions associated with high concentrations. Captive balloon soundings and temperature measurements at different altitudes were conducted during the winter of 2022/2023 to clarify thermal inversion in the Oise Valley at the center of Cergy-Pontoise. The results highlight three nocturnal wind circulation mechanisms in the valley, including downslope flow, circulation influenced by an urban heat island, and mechanical air evacuation under an inversion layer towards the less steep East side of the valley. Analysis of PM with the temperature gradient in the Oise Valley shows a significant correlation, suggesting an increase in concentrations during locally detected inversions and a decrease during atmospheric disturbance. Full article

One of the crucial branches of activity at the Łukasiewicz Research Network—Institute of Aviation is developing a suborbital rocket vehicle capable of launching small payloads beyond the Earth’s atmosphere, reaching over 100 km in altitude. Ensuring safety is a primary concern, particularly given the finite flight zone and impact area. Crucial to safety analysis is the wind profile, especially in the very first seconds of a flight, when rocket velocity is of the same order as the wind speed. Traditional near-ground wind data sources, ranging from wind towers to numerical models of the atmosphere, have limitations. Wind towers are costly and unfeasible at many test ranges used for launches, while numerical modeling may not reflect the specific ground profile near the launcher due to their large cell size (2 to +10 km). Meteorological balloons are not favorable for such measurements as they aim to provide the launch operator with a wind profile at high altitudes, and are launched only 1–2 times per flight attempt. Our study sought to prototype a wind measurement system designed to acquire near-ground wind profile data. It focuses on measuring wind direction and speed at near-ground altitudes with higher flight frequency, offering data on demand shortly before launch to help ensure safety. This atmosphere sounding system consists of an Unmanned Aerial Vehicle (UAV) equipped with an onboard ultrasonic wind sensor. Some reports in the literature have discussed the possibility of using UAV-borne anemometers, but the topic of measurement errors introduced by placing the anemometer onboard an UAV remains under studied. Limited research in this area underlines the need for experimental validation of design choices–for specific types of UAVs, anemometers, and mounting. This paper presents a literature review, a detailed overview of the prototyped system, and flight test results in both natural (outdoor) and controlled (indoor, no wind) conditions. Data from the UAV system’s anemometer was benchmarked against a stationary reference weather station, in order to examine the influence of the UAV’s rotor on the anemometer readings. Our findings show a wind speed Root Mean Square Error (RMSE) of 5 m/s and a directional RMSE of below 5.3° (both averaged for 1 min). The results were also compared with similar UAV-based wind measurements. The prototyped system was successfully used in a suborbital rocket launch campaign, thus demonstrating the feasibility of integrating UAVs with dedicated sensors for performing regular meteorological measurements in automatic mode. Full article

For rubber-like materials, there are three popular methods of equibiaxial tension available: inflation tension, equibiaxial planar tension, and radial tension. However, no studies have addressed the accuracy and comparability of these tests. In this work, we model the tension tests for a hyperelastic electroactive polymer (EAP) membrane material using finite element method (FEM) and investigate their experimental accuracy. This study also analyzes the impact of apparatus structure parameters and specimen dimensions on experimental performances. Additionally, a tensile efficiency is proposed to assess non-uniform deformation in equibiaxial planar tension and radial tension tests. The sample points for calculating deformation in inflation tensions should be taken near the top of the inflated balloon to obtain a more accurate characteristic curve; the deformation simulation range will be constrained by the material model and its parameters within a specific limit (λ ≈ 1.9); if the inflation hole size is halved, the required air pressure must be doubled to maintain equivalent stress and strain values, resulting in a reduction in half in inflation height and decreased accuracy. The equibiaxial planar tension test can enhance uniform deformation and reduce stress errors to as low as 2.1% (at λ = 4) with single-corner-point tension. For circular diaphragm specimens in radial tension tests, increasing the number of cuts and using larger punched holes results in more uniform deformation and less stress error, with a minimum value of 3.83% achieved for a specimen with 24 cuts and a 5 mm punched hole. In terms of tensile efficiency, increasing the number of tensile points in the equibiaxial planar tension test can improve it; under radial tension, increasing the number of cuts and decreasing the diameter of the punched hole on the specimen has a hedging effect. The findings of this study are valuable for accurately evaluating various equibiaxial tension methods and analyzing their precision, as well as providing sound guidance for the effective design of testing apparatus and test plans. Full article

Understanding the vertical structures of cloud condensation nuclei (CCN) and ice-nucleating particle (INP) number concentrations in desert source regions is crucial for examining dust-cloud interactions and other related impacts. To explore the vertical profiles of the CCN and INP number concentrations and their possible atmospheric–dynamic influence factors at the center of the Taklimakan Desert, intensive observations were conducted by employing a ground-based polarization Raman lidar, sounding balloons, and a sun photometer in Tazhong (83.39° E, 38.58° N, 1103 m above sea level) during the summer of 2019. Based on the GRASP algorithm, the extinction-to-volume conversion factor of dust aerosols was 0.85 × 10⁻¹² Mmm³ m⁻³, and the extinction-to-number conversion factor was predicted to be 0.20 Mm cm⁻³ on the basis of the sun photometer observations. Thus, the vertical CCN and INP number concentration profiles obtained with different parameterization schemes in the presence of various pollution levels were calculated by combining dust extinction coefficients retrieved by lidar and meteorological data observed by sounding balloon observations. The achieved results indicated that the CCN number concentration varied from 10⁻² to 10² cm⁻³ and decreased from ground level to 12 km with an average value of 36.57 cm⁻³ at the 10–12 km height range, while the INP number concentration based on parameterization schemes D10 and D15 mainly varied from 10⁻¹ to 10² L⁻¹ and from 1 L⁻¹ to 10³ L⁻¹, with average values of 3.50 L⁻¹ and 7.80 L⁻¹, respectively. Moreover, we observed a strong relationship between the INP number concentration of scheme D10 and the wind speed, with an R² value of 0.72, but a weak relationship between the CCN number concentration and the relative humidity in the boundary layer, with a Spearman’s rank correlation coefficient R² value of 0.38. The present study provides original and valuable information regarding the CCN and INP number concentrations and their related influencing factors at the center of the Taklimakan Desert and can improve our understanding of the vertical distributions of dust–cloud–atmosphere dynamic interactions, as well as of the roles of dust aerosols in the desert hydrological cycle. Full article

The ZY1-02E satellite carrying a thermal infrared sensor was successfully launched from the Taiyuan Satellite Launch Center on 26 December 2021. The quantitative characteristics of this thermal infrared camera, for use in supporting applications, were acquired as part of an absolute radiometric calibration campaign performed at the Ulansuhai Nur and Baotou calibration site (Inner Mongolia, July 2022). In this paper, we propose a novel on-orbit absolute radiometric calibration technique, based on multiple ground observations, that considers the radiometric characteristics of the ZY1-02E thermal infrared sensor. A variety of natural surface objects were selected as references, including bodies of water, bare soil, a desert in Kubuqi, and sand and vegetation at the Baotou calibration site. During satellite overpass, the 102F Fourier transform thermal infrared spectrometer and the SI-111 infrared temperature sensor were used to measure temperature and ground-leaving radiance for these surface profiles. Atmospheric water vapor, aerosol optical depth, and ozone concentration were simultaneously obtained from the CIMEL CE318 Sun photometer and the MICROTOP II ozonometer. Atmospheric profile information was acquired from radiosonde instruments carried by sounding balloons. Synchronous measurements of atmospheric parameters and ECMWF ERA5 reanalysis data were then combined and input to an atmospheric radiative transfer model (MODTRAN6.0) used to calculate apparent radiance. Calibration coefficients were determined from the measured apparent radiance and satellite-observed digital number (DN), for use in calculating the on-orbit observed radiance of typical surface objects. These values were then compared with the apparent radiance of each object, using radiative transfer calculations to evaluate the accuracy of on-orbit absolute radiometric calibration. The results show that the accuracy of this absolute radiometric calibration is better than 0.6 K. This approach allows the thermal infrared channel to be unrestricted by the limitations of spectrum matching between a satellite and field measurements, with strong applicability to various types of calibration sites. Full article

Background: Despite numerous promising innovations, the chance of survival from sudden cardiac arrest has remained virtually unchanged for decades. Recently, technological advances have been made, user-friendly portable devices have been developed, and advanced invasive procedures have been described that could improve this unsatisfactory situation. Methods: A selective literature search in the core databases with a focus on randomized controlled trials and guidelines. Results: Technical aids, such as feedback systems or automated mechanical cardiopulmonary resuscitation (CPR) devices, can improve chest compression quality. The latter, as well as extracorporeal CPR, might serve as a bridge to treatment (with extracorporeal CPR even as a bridge to recovery). Sonography may be used to improve thoracic compressions on the one hand and to rule out potentially reversible causes of cardiac arrest on the other. Resuscitative endovascular balloon occlusion of the aorta might enhance myocardial and cerebral perfusion. Minithoracostomy, pericardiocentesis, or clamshell thoracotomy might resolve reversible causes of cardiac arrest. Conclusions: It is crucial to identify those patients who may benefit from an advanced or invasive procedure and make the decision to implement the intervention in a timely manner. As with all infrequently performed procedures, sound education and regular training are paramount. Full article

The demand for digitization has inspired organizations to move towards cloud computing, which has increased the challenge for cloud service providers to provide quality service. One of the challenges is energy consumption, which can shoot up the cost of using computing resources and has raised the carbon footprint in the atmosphere; therefore, it is an issue that it is imperative to address. Virtualization, bin-packing, and live VM migration techniques are the key resolvers that have been found to be efficacious in presenting sound solutions. Thus, in this paper, a new live VM migration algorithm, live migration with efficient ballooning (LMEB), is proposed; LMEB focuses on decreasing the size of the data that need to be shifted from the source to the destination server so that the total energy consumption of migration can be reduced. A simulation was performed with a specific configuration of virtual machines and servers, and the results proved that the proposed algorithm could trim down energy usage by 18%, migration time by 20%, and downtime by 20% in comparison with the existing approach of live migration with ballooning (LMB). Full article

High-energy particles such as neutron act as serious threats to electronic equipment on board aircraft via Single Event Effects (SEE), but atmospheric neutron flux profile which could cover civil aviation altitude is rarely observed. To address the representative of atmospheric radiation data in SEE analysis, we propose a new method of detecting atmospheric neutron profile for civil aviation altitude. Using the sounding balloon carrying one nuclear radiometer, the radiation dose could be observed with high accuracy. Subsequently, the profile of atmospheric neutron flux can be derived on the basis of the conversion equation between radiation dose and the neutron flux. We implement two experiments, and the results show that this low-cost method could reliably obtain the vertical distribution of atmospheric neutron and might be integrated into SEE analysis of civil aircraft design. Full article

The Mars Exploration Program Analysis Group has identified measurements of the state and the variability of the Martian atmosphere as high priority investigations for the upcoming years. Balloon-borne instruments could bridge the gap in both temporal and spatial resolution in mesoscale distances between local, stationary landers and global orbiter observations. The idea to use a balloon system for such a purpose is not new in essence and has been proposed already in past decades. While those concepts considered an aerial deployment during entry and descent, the concept outlined in this study revisits a launch off the payload deck of a lander from the Martian surface. This deployment option profits today mainly from the technological advance in micro-electronics and sensor miniaturization, which enables the design of a balloon-probe significantly smaller than earlier proposed systems. This paper presents the feasibility assessment for this instrument and gives further details on the scientific and operational concept, a strawman sensor suite, its system components and the associated size and budget estimates. It is complemented by the analysis scheme proposed to assess, manage and mitigate the deployment risk involved in automatically launching such a balloon-system off a planetary surface. Full article

Based on observations from the Unmanned Aerial Vehicle (UAV) together with an environmental particulate matter analyzer (Grimm-180) and Global Positioning System (GPS) sounding balloons, the vertical structure of dust with different particle sizes was explored over the Taklimakan Desert (TD) during an intensive observation from 1 July 2021 to 31 July 2021. The power functions were fitted between the particle counts and particle sizes, indicating negative correlations with an R² higher than 0.99 under different dust pollution conditions in Tazhong (TZ). The dust concentrations show a sharp vertical increase over the TD during dust pollution; however, more particles with larger sizes are entrained into the air in TZ compared with Minfeng (MF). The total solar radiation during dust pollution days is significantly weakened, accompanied by major modifications in the temperature stratification, which were characterized by low-level cooling (with −2.71 K mean intensity) and high-level heating (with +0.70 K mean intensity). On clear days, the average convective boundary layer (CBL) heights at the TZ and MF are approximately 3.94 and 2.84 km, respectively, and the average stable boundary layer (SBL) height at the TZ and MF are approximately 0.19 and 0.14 km, respectively. With the increasing dust pollution level, the CBL height decreases rapidly while the SBL height shows the opposite trend. The unique ultra-high atmospheric boundary layer structure in daytime provides beneficial conditions for the suspension and vertical transportation of dust over TD. Moreover, a negative correlation between the CBL height and near-surface PM₁₀/PM_2.5/PM_1.0 concentration in TD is revealed by power function fittings. Full article

Lightning discharges are the electrical production in thunderclouds. They radiate the bulk of radio signals in the very low-frequency and low-frequency (VLF/LF) that can be detected by ground-based receivers. One kind of special intra-cloud lightning discharges known as narrow bipolar events (NBEs) have been shown to be rare but closely linked to the convective activity that leads to hazardous weather. However, there is still lack of understanding on the meteorological conditions for thunderstorm-producing NBEs, especially for those of negative polarity, due to their rare occurrence. In this work, we aim to investigate what meteorological and electrical conditions of thunderclouds favor the production of negative NBEs. Combining with the VLF/LF radio signal measured by Jianghuai Area Sferic Array (JASA), S-band Doppler radar observation and balloon sounding data, two mid-latitude thunderstorms with outbreaks of negative NBEs at midnight in East China were analyzed. The comparison with the vertical radar profile shows that the bursts of negative NBEs occurred near thunderclouds with overshooting tops higher than 18 km. Manifestation of negative NBEs is observed with a relatively low spectrum width near thundercloud tops. Our findings suggest that the detection of negative NBEs would provide a unique electrical means to remotely probe overshooting tops with implications for the exchange of troposphere and stratosphere. Full article