Search Results (59)

A new series of 6-arylaminoflavones was synthesized via the Buchwald–Hartwig cross-coupling reaction, aiming to functionalize the flavone core efficiently. Reaction optimization revealed that Pd₂(dba)₃/XantPhos with Cs₂CO₃ in toluene provided the best yields, with isolated yields ranging from 8% to 95%, depending on the arylamine structure. Steric hindrance and electron-withdrawing groups at the arylamine ring impacted the reaction outcomes. Cytotoxicity assays in different human cancer cell lines indicated that substitution patterns at both the arylamine and B-rings strongly impacted biological activity. In particular, compounds bearing a 3,4-dimethoxy substitution at the B-ring and a trifluoromethyl (13c) or chlorine (13g) group at the aniline moiety exhibited enhanced cytotoxicity. These findings provide insights into the structure–activity relationship of 6-arylaminoflavones while contributing to the development of synthetic methodologies for functionalized flavones. Full article

Platinum has emerged as an optimal catalyst for the selective hydrogenation of nitroarenes owing to its high hydrogenation activity, selectivity, and stability. In this study, we report the fabrication of platinum nanoparticles stabilized on a composite support consisting of gum acacia polymer (GAP) and TiO₂. It was engineered for the targeted reduction of nitroarenes to arylamines via selective hydrogenation in methanol at ambient temperature. The non-toxic and biocompatible properties of GAP enable it to act as a reducing and stabilizing agent during synthesis. The synthesized nanocatalyst was characterized using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Morphological and structural analyses revealed that the fabricated catalyst consisted of minuscule Pt nanoparticles integrated within the GAP framework, accompanied by the corresponding TiO₂ nanoparticles. Inductively coupled plasma optical emission spectrometry (ICP-OES) was employed to ascertain the Pt content. The mild reaction conditions, decent yields, trouble-free workup, and facile separation of the catalyst make this method a clean and practical alternative to nitroreduction. Selective hydrogenation yielded an average arylamine production of 97.6% over five consecutive cycles, demonstrating the stability of the nanocatalyst without detectable leaching. Full article

Currently, the most promising alternative to the use of the phosgenation reaction, for large-scale production of isocyanates, ureas, and carbamates, appears to be the Pd-catalyzed oxidative carbonylation of arylamines. During the reaction, the Pd(II) catalytic species are reduced to Pd(0) and the addition of sacrificial oxidizing agents is usually necessary to restart the catalytic cycle. Among these oxidizing agents, molecular oxygen is undoubtedly the more appealing, from an economical and green point of view, but it is not so efficient, whereas several metal salts (named cocatalysts) can be used, able to form redox couples with Pd(0) or to act as electron transfer mediators with oxygen itself. Testing several Pd(II) complexes, metal cocatalysts, and promoters, we have found that the [PdCl₂(dppf)]/FeCl₃/LiBr = 1/1200/200 (mol/mol) system efficiently catalyzes the carbonylation of aniline to form 1,3–diphenylurea selectively (100%) with a TOF of ca. 1177 h⁻¹. On the other hand, the addition of oxygen to such a system strongly increases the aniline conversion (0.3 MPa of O₂ increases the TOF at ca. 3930 h⁻¹), but it moves the selectivity towards the phenyl isocyanate (65%, mol/mol). Full article

The significant synthetic potential and reactivity of tetracyanoethylene (TCNE) have captured the interest of numerous chemical communities. One of the most promising, readily achievable, yet least explored pathways for the reactivity of TCNE involves its interaction with arylamines. Typically, the reaction proceeds via tricyanovinylation (TCV); however, deviations from the standard chemical process have been observed in some instances. These include the formation of heterocyclic structures through tricyanovinyl intermediates, aliphatic dicarbonitriles through the cleavage of the C–C bond of a tetracyanoethyl substituent, complexation, and various pericyclic reactions. Therefore, the objective of this study is to review the diverse modes of interaction of TCNE with aromatic nitrogen-containing compounds and to focus the attention of the chemical community on the synthetic capabilities of this reagent, as well as the various biological and optical activities of the structures synthesized based on TCNE. Full article

We present the design, synthesis, and evaluation of novel metal-free photosensitizers based on D-π-A structures featuring tri-arylamine as an electron donor, cyanoacrylic acid as an anchoring group, and substituted derivative π-bridges including 9,9-dimethyl-9H-fluorene, benzo[b]thiophene, or naphtho [1,2-b:4,3-b′]dithiophene. The aim of the current research is to unravel the relationship between chemical structure and photovoltaic performance in solar cell applications by investigating the properties of these organic sensitizers. The newly developed photosensitizers displayed variations in HOMO-LUMO energy gaps and photovoltaic performances due to their distinct π-bridge structures and exhibited diverse spectral responses ranging from 343 to 490 nm. The t-shaped and short linear photosensitizers demonstrated interesting behaviors in dye-sensitized solar cells, such as the effect of the molecular size in electron recombination. The study showed that a t-shaped photosensitizer with a bulky structure reduced electron recombination, while short linear photosensitizers with a smaller molecular size resulted in a higher open-circuit voltage value and enhanced photovoltaic performance. Impedance analysis further supported the findings, highlighting the influence of dye loading and I₃⁻ ion surface passivation on the overall performance of solar cells. The molecular design methodology proposed in this study enables promising photovoltaic performance in solar cells, addressing the demand for highly efficient, metal-free organic photosensitizers. Full article

A non-structural SARS-CoV-2 protein, PLpro, is involved in post-translational modifications in cells, allowing the evasion of antiviral immune response mechanisms. In this study, potential PLpro inhibitory drugs were designed using QSAR, molecular docking, and molecular dynamics. A combined QSAR equation with physicochemical and Free-Wilson descriptors was formulated. The r², q², and r²_test values were 0.833, 0.770, and 0.721, respectively. From the equation, it was found that the presence of an aromatic ring and a basic nitrogen atom is crucial for obtaining good antiviral activity. Then, a series of structures for the binding sites of C111, Y268, and H73 of PLpro were created. The best compounds were found to exhibit pIC₅₀ values of 9.124 and docking scoring values of −14 kcal/mol. The stability of the compounds in the cavities was confirmed by molecular dynamics studies. A high number of stable contacts and good interactions over time were exhibited by the aryl-thiophenes Pred14 and Pred15, making them potential antiviral candidates. Full article

Radicals based on arylamine cyclophanes can be used as functional materials and show application potential in fields such as synthetic chemistry, molecular electronic components, organic light-emitting diodes, and catalytic chemistry. Using a Buchwald–Hartwig palladium-catalyzed aryl halide amination method, we synthesized a series of neutral hexaazacyclophane compounds 1–3 with different substituents in the meta–meta–meta positions of the phenyl rings. Three characteristic high-spin hexaazacyclophane diradical dications were obtained by two-electron oxidation using AgSbF₆: 1^2·+•2[SbF₆]⁻, 2^2·+•2[SbF₆]⁻, and 3^2·+•2[SbF₆]⁻. The electronic structures and physical properties of these compounds were then investigated by ¹H and ¹³C nuclear magnetic resonance spectroscopy, cyclic voltammetry, electron paramagnetic resonance spectroscopy, superconducting quantum interferometry, ultraviolet–visible spectroscopy, and density functional theory calculations. The findings provide new ideas for designing radical species with novel physical properties and electronic structures. Importantly, the obtained radical species are not sensitive to air, making them valuable functional materials for practical applications. Full article

The modulation of molecular characteristics in metal-free organic dyes holds significant importance in dye-sensitized solar cells (DSSCs). The D-π-A molecular design, based on the furan moiety (π) in the conjugated spacer between the arylamine (D) and the 2-cyanoacrylic acid (A), was developed and theoretically evaluated for its potential application in DSSCs. Utilizing linear response time-dependent density functional theory (TDDFT) with the CAM-B3LYP functional, different donor and acceptor groups were characterized in terms of the electronic absorption properties of these dyes. All the studied dye sensitizers demonstrate the ability to inject electrons into the semiconductor’s conduction band (TiO₂) and undergo regeneration through the redox potential triiodide/iodide (I₃⁻/I⁻) electrode. TDDFT results indicate that the dyes with CSSH anchoring groups exhibit improved optoelectronic properties compared to other dyes. Further, the photophysical properties of all dyes absorbed on a Ti(OH)₄ model were explored and reported. The observed results indicate that bidentate chemisorption occurs between dyes and TiO₄H₅. Furthermore, the HOMO–LUMO energy gaps for almost all dye complexes are significantly smaller than those of the free dyes. This decrease of the HOMO–LUMO energy gaps in the dye complexes facilitates electron excitation, and thus more photons can be adsorbed, guaranteeing larger values of efficiency and short-circuit current density. Full article

Quinolone and quinoline derivatives are frequently found as substructures in pharmaceutically active compounds. In this paper, we describe a procedure for the synthesis of azuleno[2,1-b]quinolones and quinolines from 2-arylaminoazulene derivatives, which are readily prepared via the aromatic nucleophilic substitution reaction of a 2-chloroazulene derivative with several arylamines. The synthesis of azuleno[2,1-b]quinolones was established by the Brønsted acid-catalyzed intramolecular cyclization of 2-arylaminoazulene derivatives bearing two ester groups at the five-membered ring. The halogenative aromatization of azuleno[2,1-b]quinolones with POCl₃ yielded azuleno[2,1-b]quinolines with a chlorine substituent at the pyridine moiety. The aromatic nucleophilic substitution reaction of azuleno[2,1-b]quinolines bearing chlorine substituent with secondary amines was also investigated to afford the aminoquinoline derivatives. These synthetic methodologies reported in this paper should be valuable in the development of new pharmaceuticals based on the azulene skeleton. Full article

The chelating aluminum complex [2-(Me₂NCH₂)C₂B₁₀H₁₀]AlX₂ (X = Br 3, CH₃ 4) was synthesized using 2-dimethylaminomethyl-o-carboranyl lithium (LiCab^N, 2) with aluminum tribromide (AlBr₃) or dimethylaluminum bromide (Me₂AlBr), resulting in a modest yield. Compound 4 was obtained by reacting compound 3 with methyllithium (CH₃Li) in toluene. All compounds were characterized using infrared (IR) spectroscopy; ¹H, ¹¹B, ¹³C nuclear magnetic resonance (NMR) spectroscopy; and X-ray crystallography. X-ray structural studies of Cab^NAlBr₂ (3) and Cab^NAlMe₂ (4) (Cab^N = 2-dimethylaminomethyl-o-carboranyl) indicated that the aluminum atom was located at the center of a distorted tetrahedron. Crystal structures of Cab^NAlBr₂ (3) [a = 8.9360(3) Å, b = 12.0358(9) Å, c = 14.7730(4) Å, α = β = γ = 90°] and Cab^NAlMe₂ (4) [a = 8.9551(3) Å, b = 11.9126(9) Å, c = 14.7711(4) Å, α = β = γ = 90°] were obtained. The reactivity of aluminum complexes 3 and 4 with Lewis bases, such as H₂O, pyridine, alkylamines, and arylamines, confirmed their rapid decomposition due to the strong Lewis acidity of aluminum metals. Full article

Breast cancer is one of the leading causes of cancer death. Recent studies found that arylamine N-acetyltransferase 1 (NAT1) is frequently upregulated in breast cancer, further suggesting NAT1 could be a potential therapeutic target for breast cancer. Previous publications have established that NAT1 knockout (KO) in breast cancer cell lines leads to growth reduction both in vitro and in vivo and metabolic changes. These reports suggest that NAT1 contributes to the energy metabolism of breast cancer cells. Proteomic analysis and non-targeted metabolomics suggested that NAT1 KO may change the fate of glucose as it relates to the TCA/KREB cycle of the mitochondria of breast cancer cells. In this current study, we used [U-¹³C]-glucose stable isotope resolved metabolomics to determine the effect of NAT1 KO on the metabolic profile of MDA-MB-231 breast cancer cells. We incubated breast cancer cells (MDA-MB-231 cells) and NAT1 Crispr KO cells (KO#2 and KO#5) with [U-¹³C]-glucose for 24 h. Tracer incubation polar metabolites from the cells were extracted and analyzed by 2DLC-MS, and metabolite differences were compared between the parental and NAT1 KO cells. Differences consistent between the two KO cells were considered changes due to the loss of NAT1. The data revealed decreases in the ¹³C enrichment of TCA/Krebs cycle intermediates in NAT1 KO cells compared to the MDA-MB-231 cells. Specifically, ¹³C-labeled citrate, isocitrate, a-ketoglutarate, fumarate, and malate were all decreased in NAT1 KO cells. We also detected increased ¹³C-labeled L-lactate levels in the NAT1 KO cells and decreased ¹³C enrichment in some nucleotides. Pathway analysis showed that arginine biosynthesis, alanine, aspartate and glutamate metabolism, and the TCA cycle were most affected. These data provide additional evidence supporting the impacts of NAT1 knockout on cellular energy metabolism. The data suggest that NAT1 expression is important for the proper functioning of mitochondria and the flux of glucose through the TCA/Krebs cycle in breast cancer cells. The metabolism changes in the fate of glucose in NAT1 KO breast cancer cells offer more insight into the role of NAT1 in energy metabolism and the growth of breast cancer cells. These data provide additional evidence that NAT1 may be a useful therapeutic target for breast cancer. Full article

The reduction of nitroarenes to arylamines is a synthetically important transformation both in the laboratory and in industry. Herein, Palladium (Pd) nanoparticles were synthesized via incorporation with mesoporous fumed silica material by doping technique. Water was used as a solvent and the as-synthetized material was reduced by using NaBH₄ to ensure the total transformation of PdO into Pd nanoparticles. The synthesized sample was characterized by using inductively coupled plasma (ICP) elemental analysis, X-ray powder diffraction (XRD), N₂ sorption measurement, scanning electron microscope (SEM), energy-dispersive spectroscopy (EDX), and transmission electron microscopy (TEM). Data showed that the Pd nanoparticles were successfully synthesized and supported on the mesoporous silica with an average size in the ranges of 10–20 nm, with an irregular shape. The purity of the synthesized sample was confirmed by EDX analysis which exhibits the presence of Si, O, and Pd. The catalytic activity of the prepared sample was evaluated in the heterogeneous reduction of nitroarenes to aromatic amines. Reduction reaction was monitored by Shimadzu GC-17A gas chromatography (GC, Japan) equipped with flam ionization detector and RTX-5 column, 30 m × 0.25 mm, 1-μm film thickness. Helium was used as carrier gas at flow rate 0.6 mL/min. Interestingly, the green hydrogenation of nitroarenes to primary amine compounds was achieved in an aqueous solution with high efficiency and in a short time; moreover, the reusability of heterogeneous Pd-SiO₂ was performed for four repeated cycles with more than 88% of efficiency at the fourth run. Finally, the heterogeneity of catalysis with high reliability and eco-friendly processes is a super new trend of nitroarenes reduction in the industry and economic scales. Full article

This study processes a facile and green approach for the Markovnikov-selective hydroamination of styrene with naphthylamine through irradiation with UV LED light (365 nm) via an electron donor–acceptor complexation between naphthylamines and oxygen in situ. This protocol showcases the synthetic potential for aerobic C–N bond formation without using a metal catalyst and photosensitizer. Three naphthylamines were examined and afforded desired C–N bond formation product in moderate yield. Full article

The drug-resistance problem is widely spread and becoming more common in community-acquired and nosocomial strains of bacteria. Therefore, finding new antimicrobial agents remains an important drug target. From this perspective, new derivatives of benzothiazole were synthesized and evaluated for their antimicrobial activity and ability to inhibit the DHPS enzyme. The synthesis was carried out by the reaction of benzothiazole N-arylsulphonylhydrazone with N-aryl-2-cyano-3-(dimethylamino)acrylamide, N-aryl-3-(dimethylamino)prop-2-en-1-one, arylaldehydes or diazonium salt of arylamine derivatives, which led to the formation of N-arylsulfonylpyridones 6a–d (yield 60–70%) and 12a–c (yield 50–60%),N-(2-(benzo[d]thiazole-2-yl)-3-arylacryloyl-4-methylsulfonohydrazide 14a–c (yield 60–65%), 4-(benzo[d]thiazole-2-yl)-5-aryl-1H-pyrazol-3(2H)-one 16a–c (yield 65–75%), and N′-(2-(benzo[d]thiazol-2-yl)-2-(2-arylhydrazono)acetyl)-4-arylsulfonohydrazide 19a–e (yield 85–70%). The antimicrobial evaluations resulted into a variety of microbial activities against the tested strains. Most compounds showed antimicrobial activity against S. aureus with an MIC range of 0.025 to 2.609 mM. The most active compound, 16c, exhibited superior activity against the S. aureus strain with an of MIC 0.025 mM among all tested compounds, outperforming both standard drugs ampicillin and sulfadiazine. The physicochemical–pharmacokinetic properties of the synthesized compounds were studied, and it was discovered that some compounds do not violate rule of five and have good bioavailability and drug-likeness scores. The five antimicrobial potent compounds with good physicochemical–pharmacokinetic properties were then examined for their inhibition of DHPS enzyme. According to the finding, three compounds, 16a–c, had IC₅₀ values comparable to the standard drug and revealed that compound 16b was the most active compound with an IC₅₀ value of 7.85 μg/mL, which is comparable to that of sulfadiazine (standard drug) with an IC₅₀ value of 7.13 μg/mL. A docking study was performed to better understand the interaction of potent compounds with the binding sites of the DHPS enzyme, which revealed that compounds 16a–c are linked by two arene-H interactions with Lys220 within the PABA pocket. Full article

Vaccinia H1-related phosphatase (VHR) is a dual-specific phosphatase that is a promising potential target for the treatment of many human diseases. In this work, we have proposed a series of 6-(4-chlorophenyl)-N-aryl-4-(trichloromethyl)-4H-1,3,5-oxadiazin-2-amines as potential VHR inhibitors. The SuperPred online server predicts VHR inhibition for the studied compounds with a probability of 88.88–98.51%. To establish the efficiency of binding of 4H-1,3,5-oxadiazine derivatives to the active site of VHR (PDB ID: 3F81) in the AutoDock Vina program, we have carried out molecular docking studies. According to the results, the studied compounds effectively interact with the hydrophobic region of the VHR active site due to aromatic rings and the trichloromethyl group, but the polar catalytic cavity is not involved, and therefore inhibition cannot be effective. In this regard, we have built a number of model compounds containing a sulfate group and its derivatives (methyl ester and amide) in the para-position of the arylamine fragment. According to the results of molecular docking, these compounds effectively bind to the polar catalytic cavity of the enzyme due to hydrogen bonds, but due to the relative rigidity of their molecules, hydrophobic interactions are not fully realized. Therefore, in these model compounds between the arylamine fragment and the sulfo group, we introduced a spacer with a length of one to three methylene groups. Hit compounds have been selected—2-(4-((6-(4-chlorophenyl)-4-(trichloromethyl)-4H-1,3,5-oxadiazin-2-yl)amino)phenyl)ethane-1-sulfonic acid and its amide. Full article