Search Results (142)

Nanoparticles leverage their unique nanoscale effects to optimize concrete performance through synergistic multi-mechanism interactions. Core mechanisms include micro-filling effects (graded pore filling, optimized pore structure), nucleation (promoting crystallization of hydration products, refining microstructure), chemical reactivity (e.g., pozzolanic reaction of nano-SiO₂, enhancing interfacial transition zones), and interfacial strengthening (improving ITZ structure and stress transfer). Common nanomaterials (e.g., nano-SiO₂, Al₂O₃, carbon nanotubes) significantly enhance concrete’s mechanical properties, durability, and functionalities (e.g., self-sensing, electromagnetic shielding). However, nano-modified concrete still faces challenges such as poor dispersion, high cost, and environmental/health risks. Future efforts should focus on multi-scale mechanism research, green low-cost synthesis processes, and intelligent composite systems development to advance the engineering applications pf nano-modified concrete. Full article

In the context of new power systems, the safe and accurate sensing of voltage data is crucial for the secure and stable operation of power grids. Given that existing voltage measurement devices cannot meet the development requirements for wide-area deployment and distributed monitoring, this paper designs a non-intrusive voltage measurement device based on MEMS (micro-electromechanical system) electric field sensors, which are characterized by their small size, low power consumption, ease of installation and strong anti-interference ability. Firstly, the paper introduces the voltage measurement principle and analyzes the equivalent circuit based on this analysis; secondly, the key structural design of the measurement device is completed and the prototype of the device is developed; finally, the accuracy and anti-jamming tests of the measurement device are conducted by establishing an experimental platform, followed by field applications. Experimental results demonstrate that the voltage measurement device has high measurement accuracy, and the maximum error is only 1.215%. Additionally, the device has a good shielding capability against the coupled electric field of surrounding interference conductors, with a maximum error increase of 1.313%. In a 10 kV overhead line voltage test, the device can accurately obtain the actual voltage. The voltage measuring device developed in this paper can provide data support for the condition assessment of overhead lines and effective monitoring means for the safe and stable operation of the power system. Full article

Asphalt concrete has a unique low-temperature fracture mechanism due to the complex interaction between macro- and micro-cracks. This study investigated the toughening effect of micro-cracks on the crack propagation behavior of asphalt concrete at low temperatures. The Taylor model was applied to establish a modulus damage model of asphalt concrete. In combination with the discrete element method (DEM), a 2D microstructure damage model of asphalt concrete with heterogeneity (aggregate, mortar, and voids) and multi-level (aggregate gradation) characteristics was constructed. A virtual semi-circular bending (SCB) test was performed to reveal the toughening effect of the micro-cracks in terms of macroscopic and microscopic parameters, such as the modulus damage variable, dynamic parameters associated with the main crack propagation, and stress field distribution, laying a foundation for predicting the propagation behavior and path of macroscopic cracks in asphalt concrete. The results showed that (1) the proposed modulus damage model based on the Taylor model produced results that were in good agreement with the numerical simulation (virtual SCB test) results. With an increase in the micro-crack density, the influence of the main cracks on the modulus damage of asphalt concrete gradually reduced, indicating that the micro-cracks exhibited a toughening effect on the main crack propagation; (2) At the meso-scale, the toughening effect of the micro-cracks extended the duration of the crack propagation stage and macro-crack formation stage; that is, the toughening effect of the micro-cracks had a shielding effect on the main crack propagation; (3) The toughening effect could inhibit the shear stress field, contributing to preventing the deterioration in the modulus of asphalt concrete. Full article

Inflammatory bowel disease (IBD) represents a chronic inflammatory disorder of the gastrointestinal tract with a multifactorial etiology that remains incompletely elucidated. Accumulating evidence implicates dysregulation of the intestinal micro-ecosystem, aberrant neuroimmune interactions, and compromised epithelial barrier integrity as key contributors to IBD pathogenesis. While oral administration remains the predominant therapeutic approach, the acidic gastric milieu and enzymatic catabolism markedly compromise drug efficacy. Consequently, selecting an optimal drug delivery method has become a pressing issue in IBD management. As a drug delivery platform, hydrogels, distinguished by their favorable biocompatibility, biodegradability, and injectability, can shield drugs from the harsh gastrointestinal environment. This review offers an innovative and comprehensive analysis of the interactions among various hydrogel application forms, delivery routes, and loaded substances, summarizing the advantages of different types of hydrogels in terms of their anti-inflammatory properties and maintenance of intestinal flora homeostasis, as well as discussing the limitations of current hydrogel deliver systems and looking to the future. Full article

One of the most popular alloys for biomedical applications is TiAl6V4. Even though TiAl6V4 is widely used, it faces several challenges. Firstly, TiAl6V4 is prone to stress shielding caused by the difference in Young’s moduli of the alloy (110 GPa) and human bones (20–30 GPa). Secondly, there is the presence of cytotoxic elements, aluminum and vanadium. Researchers have proposed Ti-35Nb-7Zr-5Ta (TNZT) alloy to overcome these disadvantages, an excellent substitute for natural human bones. This alloy offers a lower elastic modulus (up to 81 GPa), much closer to human bones than TiAl6V4 alloy. Also, TNZT alloy contains no cytotoxic elements and has excellent biocompatibility and high corrosion resistance. Given the positive outcomes on powder-mixed micro electro-discharge machining (PM-μ-EDM) of Ti alloy using hydroxyapatite (HA) powder, we studied the machinability of TNZT alloy using HA powder mixed-μ-EDM by changing the HA powder concentration (0, 5, and 10 g/L), gap voltage (90, 100, and 110 V), and capacitance (10, 100, and 400 nF) according to the Taguchi L9 method. Machining performance metrics such as material removal rate (MRR), overcut, and circularity were examined using a tungsten carbide tool of 237 µm diameter. The results showed an overcut of 10.33 µm, circularity of 8.47 µm, and MRR of 6030.89 µm³/s for the lowest energy setup. Full article

Energy-selective surfaces (ESSs) have gained attention as an advanced electromagnetic protection technology. This review discusses the evolution of ESSs, focusing on four key areas: frequency bandwidth expansion, material innovations, functional enhancements, and application diversification. ESSs have evolved from narrowband designs to providing ultra-wideband protection, covering L-band to K-band frequencies. New designs, including non-reciprocal mechanisms and cascaded filters, enhance the shielding efficiency. Material advancements like the use of vanadium dioxide (VO₂) and micro–nano fabrication techniques have reduced costs and improved performance, enabling higher-frequency applications. Future developments aim to overcome the current limitations, offering a broader bandwidth, higher power tolerance, and faster response times. ESSs play a key role in integrated electromagnetic protection systems. Full article

In order to meet the demand for structural/functional integrated materials in the field of electromagnetic shielding, a graphene nanosheets (GNSs) reinforced magnesium matrix composite was fabricated using an electrophoretic deposition and subsequent accumulative roll bonding process (ARB). The microstructure, mechanical properties, and electromagnetic interference (EMI) shielding effectiveness (SE) of the GNSs/Mg composites were characterized systematically. The results showed that synergistic strengthening of the mechanical properties and EMI shielding performance of the composites was realized. The strengthening mechanisms for the mechanical and EMI shielding performance of the GNSs/Mg composites were analyzed thoroughly. After five passes of ARB, the ultimate tensile strength and elongation were 271.79 MPa and 12.9%, respectively. For the laminated structure, the strengthening is related to the thickness of the graphene layer, the dispersion, and the interfacial bonding with the metal matrix. In electromagnetic shielding aspects, after ARB-5, the SE is 93.36–105.15 dB. The introduction of well-organized multivariate multi-scale macro–micro interfaces increased the electromagnetic wave propagation paths and multiple reflection loss absorption in the internal propagation paths. Moreover, the addition of carbon nanomaterials led to an increase in the number of interfaces, which was conducive to the expansion of the internal reflection paths; carbon nanomaterials at the interfaces also improved the electromagnetic wave absorption. Full article

The clustered regularly interspaced short palindromic repeats/CRISPR-associated protein 9 (CRISPR/Cas9) system is a promising biotechnology tool for genome editing. However, in living organisms, several pharmacokinetic challenges arise, including off-target side effects due to incorrect distribution, low bioavailability caused by membrane impermeability, and instability resulting from enzymatic degradation. Therefore, innovative delivery strategies must be developed to address these issues. Modified nanoparticles offer a potential solution for the non-invasive delivery of CRISPR/Cas9 ribonucleoproteins (Cas9 RNPs). Cas9 RNPs encapsulated in nanoparticles are protected from enzymatic degradation, similar to how microRNAs are shielded within exosomes. It is well-established that certain materials, including proteins, are expressed selectively in specific cell types. For example, the α-7 nicotinic receptor is expressed in endothelial and neuronal cells, while the αvβ3 integrin is expressed in cancer cells. These endogenous materials can facilitate receptor-mediated endocytosis or transcytosis. Nanoparticles encapsulating Cas9 RNPs and coated with ligands targeting such receptors may be internalized through receptor-mediated mechanisms. Once internalized, Cas9 RNPs could perform the desired gene editing in the nucleus after escaping the endosome through mechanisms such as the proton sponge effect or membrane fusion. In this review, I discuss the potential and advantages of delivering Cas9 RNP-encapsulated nanoparticles coated with ligands through receptor-mediated endocytosis or transcytosis. Full article

Metallic biomaterials in a solid form cause stress-shielding in orthopedic applications. Such implants also suffer from limited tissue attachment to become a part of the living system. In view of that, hydroxyapatite (HA) coating reinforced with titanium oxide (TiO₂) was deposited in a beta (β)-Titanium (Ti-35Nb-7Ta-5Zr) substrate by plasma spray. This allows us to exploit the best of the two materials, namely the relatively low modulus of β-Ti, together with the porous and bone-like structure/composition of the HA to facilitate cell growth. This is foreseen to be used as an implant, particularly for musculoskeletal-related disability. Detailed scanning electron microscopy (SEM) investigation shows the lamellar structure of the coating that is composed of different phases and some porosities. Transmission electron microscopy (TEM) confirms the co-existence of both the amorphous and crystalline phases that build up the coating structure. In situ micro-mechanical tests revealed that the HA-TiO₂ coating was low in strength and modules compared to that of the substrate material, together with lower ductility. The yield stress and modulus of elasticity of the coating were about 877 ± 174 MPa and 447 ± 24 MPa, respectively. In contrast, the beta (β)-Ti substrate possesses about 990 ± 85 MPa of yield stress and 259 ± 19 MPa modulus of elasticity. The deformation mechanism was also quite different, where the coating crumbled under compressive loading, featuring limited ductility with cleavage (brittle)-type fracture, and the substrate showed plastic flow of materials in the form of slip/shear planes with extended ductility. Full article

The applications of polymeric materials are being constantly reviewed and improved. In the present world, the word hybrid, and the general idea of combining two or more inherently different approaches, designs, and materials is gaining significant attention. The area of sustainable materials with a low environmental impact is also rapidly evolving with many new discoveries, including the use of materials of a natural origin and countless combinations thereof. This review tries to summarize the current state of knowledge about hybrid polymeric materials and their applications with special attention to the materials that can be considered “environmentally friendly”. As the current application field is quite broad, the review was limited to the following topics: packaging, medical applications, sensors, water purification, and electromagnetic shielding. Furthermore, this review points out the new prospects and challenges for the use of the mentioned materials in terms of creating novel solutions with different nano and micro-materials of mostly natural and renewable origin. Full article

This paper reviews and compares electrostatically actuated MEMS (micro-electro-mechanical system) arrays for light modulation and light steering in which transmission through the substrate is required. A comprehensive comparison of the technical achievements of micromirror arrays and microshutter arrays is provided. The main focus of this paper is MEMS micromirror arrays for smart glass in building windows and façades. This technology utilizes millions of miniaturized and actuatable micromirrors on transparent substrates, enabling use with transmissive substrates such as smart windows for personalized daylight steering, energy saving, and heat management in buildings. For the first time, subfield-addressable MEMS micromirror arrays with an area of nearly 1 m² are presented. The recent advancements in MEMS smart glass technology for daylight steering are discussed, focusing on aspects like the switching speed, scalability, transmission, lifetime study, and reliability of micromirror arrays. Finally, simulations demonstrating the potential yearly energy savings for investments in MEMS smart glazing are presented, including a comparison to traditional automated external blind systems in a model office room with definite user interactions throughout the year. Additionally, this platform technology with planarized MEMS elements can be used for laser safety goggles to shield pilots, tram, and bus drivers as well as security personal from laser threats, and is also presented in this paper. Full article

The metastable β-Ti21S alloy exhibits a lower elastic modulus than Ti-6Al-4V ELI while maintaining high mechanical strength and ductility. To address stress shielding, this study explores the integration of lattice structures within prosthetics, which is made possible through additive manufacturing. Continuous adhesion between the implant and bone is essential; therefore, auxetic bow-tie structures with a negative Poisson’s ratio are proposed for regions under tensile stress, while Triply Periodic Minimal Surface (TPMS) structures with a positive Poisson’s ratio are recommended for areas under compressive stress. This research examines the manufacturability and quasi-static mechanical behaviour of two auxetic bow-tie (AUX 2.5 and AUX 3.5) and two TPMS structures (TPMS 2.5 and TPMS 1.5) in β-Ti21S alloy produced via laser powder bed fusion. Micro-CT reveals printability issues in TPMS 1.5, affecting pore size and reducing fatigue resistance compared to TPMS 2.5. AUX 3.5’s low stiffness matches cancellous bone but shows insufficient yield strength and fatigue resistance for femoral implants. Biological tests confirm non-toxicity and enhanced cell activity in β-Ti21S structures. The study concludes that the β-Ti21S alloy, especially with TPMS 2.5 structures, demonstrates promising mechanical and biological properties for femoral implants. However, challenges like poor printability in TPMS 1.5 are acknowledged and should be addressed in future research. Full article

This study investigates the impact of micro- and nanocellulose coatings on the properties of wool fabrics using the solution blow spinning technique. The objective is to assess how varying cellulose sizes influence key fabric attributes, including physical properties, UV-shielding ability, air permeability and water vapour permeability, with a focus on their practical applications. Coating with microcrystalline cellulose (MCC) was found to increase the air permeability of fabric significantly, whereas coating with cellulose nanocrystals (CNCs) enhanced water vapour permeability and reduced pore size. The air permeability could relate to the breathability, and water vapour permeability could relate to the comfortability. Coated fabric with both sizes of cellulose could have different applications, like pollen filtration and printable cloth, and further functionality could be achieved by modifying the cellulose structure. This research establishes a platform for the effective application of cellulose coatings on wool fabric, offering promising advancements for textile performance and sustainability. Full article

Within this manuscript, we provide a novel Fano resonance-driven micro-nanosensor. Its primary structural components are a metal-insulator-metal (MIM) waveguide, a shield with three disks, and a T-shaped cavity (STDTC). The finite element approach was used to study the gadget in theory. It is found that the adjustment of the structure and the change of the dimensions are closely related to the sensitivity (S) and the quality factor (FOM). Different model structural parameters affect the Fano resonance, which in turn changes the transmission characteristics of the resonator. Through in-depth experimental analysis and selection of appropriate parameters, the sensor sensitivity finally reaches 3020 nm/RIU and the quality factor reaches 51.89. Furthermore, the installation of this microrefractive index sensor allows for the quick and sensitive measurement of glucose levels. It is a positive contribution to the field of optical devices and micro-nano sensors and meets the demand for efficient detection when applied in medical and environmental scenarios. Full article

The growing importance of electromagnetic interference (EMI) shielding composites in civil engineering has garnered increasing attention. Conductive cement-based composites, incorporating various conductive fillers, such as carbon nanotubes (CNTs), carbon fibers (CFs), and graphene nanoplatelets (GNPs), provide effective solutions due to their high electrical conductivity. While previous studies have primarily focused on improving the overall shielding effectiveness, this research emphasizes balancing the reflection and absorption properties. The experimental results demonstrate an EMI shielding performance exceeding 50 dB, revealing that filler size (nano, micro, or macro) and shape (platelet or fiber) significantly influence both reflection and absorption characteristics. Based on a comprehensive evaluation of the shielding properties, this study highlights the need to consider factors such as reflection versus absorption losses and filler shape or type when optimizing filler content to develop effective cement-based EMI shielding composites. Full article