Search Results (6,458)

This study reports the development of a hierarchically porous material based on natural diatomite, thermally treated diatomite (450 °C), and an activated carbon-modified diatomite composite for saline groundwater treatment in West Kazakhstan, addressing the need for efficient desalination solutions under real environmental conditions. The material was synthesized via sequential thermal activation at 450 °C followed by incorporation of activated carbon, with bentonite used as a binder to improve mechanical stability. Comprehensive physicochemical characterization (SEM, XRD, XRF, BET, DTA, and FTIR) confirmed significant structural and compositional transformations, including silica enrichment, removal of impurities, and the development of a well-defined hierarchical porous network. The specific surface area increased from 8 to 10 m²/g for natural diatomite to 35–40 m²/g for thermally treated diatomite and further to 55–60 m²/g for the activated carbon-modified diatomite composite, accompanied by enhanced pore volume and mesoporosity. Performance evaluation using real groundwater samples demonstrated that thermally treated diatomite (450 °C) improved removal efficiency by approximately 19%, while the activated carbon-modified diatomite composite achieved 35–37% removal of chloride, sulfate, and total dissolved solids under multi-ion competitive conditions. The enhanced adsorption performance is attributed to the synergistic effect of increased surface area, improved pore accessibility, and additional active sites introduced by activated carbon. The adsorption process is governed by ion bridging mediated by multivalent cations, pore filling within the hierarchical pore structure, and surface complexation on silanol and metal–hydroxyl functional groups. Leaching tests confirmed the structural stability of the composite and indicated no significant release of environmentally relevant elements under aqueous conditions. Compared with natural diatomite, the thermally treated and activated carbon-modified materials demonstrate improved adsorption efficiency and stable performance under realistic groundwater conditions. These results highlight their applicability for decentralized water treatment systems in regions affected by saline groundwater contamination. Full article

The determination of soluble elemental contaminants in tattoo inks is challenged by the lack of standardized extraction procedures, limiting the comparability of analytical results and the assessment of exposure-relevant fractions under the European REACH framework. In this study, artificial sweat extraction was applied as a mild and physiologically relevant approach to evaluate elements potentially released from tattoo inks under sweat-simulated skin-contact conditions. Seventy-eight commercial tattoo inks of different colors were extracted with artificial sweat at 37 °C for 1 h and analyzed by inductively coupled plasma mass spectrometry. Optimization of collision/reaction cell conditions, dilution strategy, and internal standard correction effectively reduced matrix-related interferences caused by the high salt and chloride content of artificial sweat, ensuring reliable quantification. Matrix-matched calibration was required due to significant signal suppression for several analytes. Method accuracy and precision, assessed using NIST 1643f and spiked samples, were generally satisfactory. Elemental release showed marked color-dependent trends, particularly for Cu, Zn, Ba, Al, Ga, Si, Sr, and Zr, reflecting differences in pigment composition and formulation. Soluble Ba, Cu, and Zn remained below EU regulatory limits. While total digestion remains essential for complete characterization, the proposed methodology provides a simple and transferable tool for exposure-oriented assessment of potentially bioaccessible elements in tattoo inks. Full article

Biochar-based fertilizers (BBFs), including formulations enriched with additives, are sustainable alternatives to conventional fertilizers, promoting waste reuse and controlled nutrient release. This study performed a global meta-analysis to evaluate nutrient dynamics (release and leaching in water and soil) and the agronomic performance of additive-enhanced BBFs compared with unfertilized and/or conventionally fertilized controls. Thirty studies were selected, with 264 experimental pairs extracted from the Web of Science and Scopus databases, and analyzed using a random-effects model. The results indicated that BBFs enriched with natural mineral additives promoted an average increase of 204.3% in nutrient release in water (p < 0.001), whereas in soil biotechnological additives showed the greatest increase, with 109.8% (p < 0.001). Leaching was reduced by up to 74.4% with BBFs enhanced with agricultural residue additives and by 46.9% with industrial additives, indicating greater nutrient retention and greater nutrient-use efficiency. In terms of agronomic performance, additive-enhanced BBFs resulted in average increases of 49.3% in plant height, 232.3% in aboveground biomass, 60.8% in root biomass, and 11.2% in grain yield, compared to unfertilized soil. Overall, the effectiveness of BBFs depends on both the type of additive and the application method, with industrial and mineral additives being the most promising for controlled nutrient release and increased crop productivity. Full article

Vanadium tailings-based ceramsite (VT-Ceramsite), a type of porous ceramsite synthesized from vanadium tailings, was employed for the adsorption of fluoride ions from high-fluoride wastewater. This approach not only mitigates environmental pollution caused by industrial solid waste but also effectively removes fluoride contaminants from wastewater. The effects of vanadium tailings content, sintering temperature, and sintering time on the adsorption performance of the VT-Ceramsite were systematically investigated. Comprehensive characterizations via XRD, SEM, BET, and adsorption modeling reveal that fluoride sequestration by VT-Ceramsite is governed by the synergy between physical diffusion and chemical interactions. While the porous architecture provides essential transport pathways, the chemically active sites facilitate stable bonding. Future research will prioritize surface functionalization and tailoring strategies to augment the density of these active sites, thereby maximizing the adsorption potential for treating complex industrial effluents. The optimal preparation conditions were determined to be a ratio of 6.5:2.5:1 for vanadium tailings, fly ash, and kaolin, with a preheating temperature of 300 °C for 20 min and a sintering temperature of 900 °C for 20 min. In these conditions, the adsorption capacity for fluorine ions can reach 43.59 mg/g. VT-Ceramsite exhibited a specific surface area of 3.61 m²/g, hydrochloric acid solubility of 1.2%, and a void fraction of 48.68%, all parameters met national industrial standards. In addition, the leaching concentrations of heavy metals were found to be well below the limits specified in CJ/T 299-2008, indicating that the material poses no risk of secondary pollution. The study provides an economical, safe, and environmentally friendly route for the utilization of solid waste, and it offers a promising adsorbent for treating high-fluoride wastewater. Full article

In this study, the amination-based modification of kraft lignin (KL) was implemented through phenolization treatment combined with the Mannich reaction to synthesize the aminated lignin (APKL) with high nitrogen content. Afterward, the chemical structural changes and reaction mechanism of KL during the modification process were surveyed in depth using diverse analytical techniques. The results revealed that the phenolization treatment markedly raised the active site number in KL from 5.79 to 25.5 mmol/g, which led to a significant increase in the chemical reactivity of KL. Meanwhile, the amine group was successfully grafted onto the best phenolized kraft lignin (PKL) after the Mannich reaction. Furthermore, the effects of amination reagent, reactant mass ratio, temperature and time on the nitrogen content of APKL were systematically examined to optimize the reaction conditions for amination. Using FTIR, molecular weight and elemental analyses, the optimal amination conditions were determined as a reaction temperature of 75 °C, reaction time of 3 h and PKL₆/arginine/formaldehyde mass ratio of 3:21:28. Under these parameters, APKL₁₀ with a higher nitrogen content of 19.2% and lower C/N ratio of 2.46 was acquired. In addition, TG and SEM results revealed that the obtained APKL₁₀ possessed a flake-like structure and outstanding thermal stability, which was beneficial for its subsequent application as a slow-release soil fertilizer. More importantly, the soil column leaching test confirmed that the as-prepared APKL₁₀ had excellent nitrogen slow-release properties in the soil. As a result, this kraft lignin derivative generated by phenol treatment followed by amination-based modification could serve as an efficient nitrogen fertilizer, providing a long-term nitrogen source for plant growth in soil. Full article

Gold, as a critical material with both financial and industrial value, is widely used across numerous fields such as finance, aerospace and medical care. Under the global background of increasing geopolitical risks and the advancement of high-tech industries, the demand for gold continues to grow steadily. The main raw materials for extracting gold are mainly divided into ore and electronic waste. Currently, conventional cyanidation remains the dominant industrial method for gold recovery. However, issues such as pollution and high toxicity of cyanide tailings are driving global efforts to explore environmentally friendly alternatives. Therefore, the development of green and efficient gold extraction technology has become a global research hotspot. This article focuses on cyanide-free leaching technologies, providing a detailed review of their current developments, advantages, and limitations, and proposing future trends in gold extraction. The future development directions of gold extraction include the development of thiosulfate–glycine leaching systems, the combination of multi-technology collaborative processes such as ultrasonic assistance and biological treatment to enhance efficiency, the strengthening of microbial metallurgy technology, and the construction of a resource recycling system for electronic waste. This review provides new insights and development directions for extracting gold for sustainable development. Full article

Carbon capture, utilization and storage (CCUS) is a key technology for carbon neutrality and efficient oilfield development. Oil well cement suffers serious carbonation degradation under high-temperature, high-pressure and high CO₂ partial pressure environments, leading to well cementing failure. In this study, TA@Gr-OTES (TGO) composite was prepared by surface grafting modification, and a hydrophobic oil well cement system suitable for CCUS was constructed. The anti-carbonation performance was tested under simulated formation conditions (130 °C, 25 MPa, CO₂ partial pressure 7 MPa). Results show that TGO-modified cement maintains stable hydrophobicity, with a 60-day compressive strength attenuation rate of only 6.7%, and its permeability and porosity are much lower than those of plain cement. TGO inhibits deep carbonation and corrosion product leaching, preserves hydration products, and reduces defect volume. The potential triple mechanisms of a hydrophobic barrier, graphene physical shielding and matrix densification effectively blocks CO₂ intrusion. This study provides theoretical and technical support for long-life cementing materials in CCUS wells. Full article

Containerized ornamental plant production requires efficient irrigation strategies to balance plant quality with water and nutrient conservation. This study evaluated four leaching fraction (LF) levels (0%, 20%, 40%, and 60%) in a completely randomized design with three replications, each consisting of three pots, to determine their effects on plant growth, ornamental quality, gas exchange, water use efficiency (WUE), and macronutrient leaching in off-season potted Curcuma cv. ‘Jasmine Pink’. Irrigation volumes were determined using crop coefficient (Kc)-based estimates derived from evaporation pan measurements. The results showed that the highest LF level (60%) significantly improved several ornamental quality traits, including flower number per cluster, leaf greenness, specific leaf area, and compactness index, while also increasing aerial dry weight and improving gas exchange parameters during the flowering stage. These improvements were associated with reduced substrate electrical conductivity, indicating lower soluble salt accumulation in the root zone under higher LF treatments and more favorable conditions for plant growth. Leaching fraction is commonly used in containerized crop production to prevent excessive salt accumulation in the root zone by allowing excess irrigation water to drain from the substrate. However, increasing LF also resulted in greater irrigation water consumption and higher macronutrient losses through leachate, particularly potassium. In contrast, lower LF treatments (0–20%) improved water use efficiency and reduced nutrient losses but were associated with higher substrate electrical conductivity, suggesting greater soluble salt accumulation in the root zone. Overall, the results indicate that a higher LF (60%) provided the greatest improvement in plant growth and ornamental quality under the conditions of the present study for off-season potted Curcuma alismatifolia production, although integrated strategies may be required to reduce water and nutrient losses. These findings provide practical insights for optimizing irrigation management in container-grown ornamental crops. Full article

Magma-heated geothermal systems have garnered significant attention in academia due to their unique formation mechanisms and vast potential. This paper focuses on the Rehai, Ruidian, and Banglazhang geothermal fields in the Tengchong area. We present the element geochemistry and isotope compositions of hot springs, cold springs, and surface water to explore magmatic fluid input into geothermal systems and investigate the release of deep mantle-derived components. Based on our findings, we propose a conceptual model and theoretical framework for geothermal system genesis constrained by magmatic heat source influences. Results indicate that magma-heated geothermal systems coexist with three types of geothermal water: neutral chloride-rich water, acidic sulfate-rich water, and alkaline bicarbonate-rich water. The infusion of magmatic fluids into geothermal systems. The enrichment of trace elements in hot springs is jointly controlled by magmatic fluid input and host rock leaching. The magma chamber is the primary factor influencing the reservoir temperature. The parent geothermal fluid can be identified within the geothermal system. During circulation, the parent geothermal fluid undergoes three cooling processes: adiabatic cooling, conductive cooling, and mixing with cold water. We propose that the release of mantle-derived materials is a key factor in element enrichment within magma-heated geothermal systems, and mantle-derived components are more enriched in areas with active magma chambers. The findings of this study provide insights into magmatic fluid input into geothermal systems and highlight the critical role of the release of mantle-derived components in the formation of high-temperature geothermal resources. Full article

Saline water irrigation has emerged as a promising approach to mitigate agricultural water shortages; however, its improper use may induce secondary soil salinization. In this study, saline-alkali soil collected from Hami, Xinjiang, was used to conduct a series of indoor one-dimensional vertical soil column experiments. The aim was to systematically investigate the effects of sodium humate and desulfurization gypsum on soil infiltration behavior and the distribution patterns of key cations and anions under different levels of irrigation water salinity. The results showed that sodium humate application markedly improved soil infiltration capacity, while the duration of infiltration decreased with increasing salinity. Under salinity levels of 12 and 16 g/L, the 4 g/kg sodium humate treatment exhibited the most rapid advancement of the wetting front. In contrast, desulfurization gypsum reduced infiltration rates, with the lowest infiltration observed under the 12.5 g/kg treatment at 16 g/L salinity. Under different treatments, the adjusted coefficients of determination (adjusted R²) for the Philip, Kostiakov, and Horton models ranged from 0.8450 to 0.9841, 0.9901 to 0.9989, and 0.9748 to 0.9942, respectively, while the global performance indicator (GPI) ranged from 1.619 × 10⁻³ to 5.103 × 10⁻¹, 4.998 × 10⁻⁹ to 2.166 × 10⁻⁵, and 1.505 × 10⁻⁶ to 2.438 × 10⁻⁴, respectively. These results indicate that the Kostiakov model outperformed the other models in terms of fitting accuracy and overall performance for describing the soil infiltration process. In addition, sodium humate generally increased the sorptivity parameter S in the Philip model and the empirical coefficient K in the Kostiakov model, whereas desulfurization gypsum showed the opposite trend. In terms of salt regulation, sodium humate demonstrated optimal desalination performance at application rates of 6–8 g/kg under low salinity and 4–6 g/kg under high salinity conditions. Conversely, excessive gypsum application tended to exacerbate salt accumulation, although a moderate dosage (5 g/kg) effectively limited the downward migration and accumulation of Na⁺ and Cl⁻. These two ions were identified as the dominant contributors to soil salinization, showing strong positive correlations with soil salt content (SSC), sodium adsorption ratio (SAR), and exchangeable sodium percentage (ESP). In contrast, Ca²⁺, Mg²⁺, and HCO₃⁻ played beneficial roles in alleviating sodicity through ion exchange and buffering mechanisms. Overall, sodium humate enhanced infiltration and facilitated salt leaching in the upper soil layers under saline irrigation conditions. Although desulfurization gypsum reduced infiltration and increased overall salt content, it contributed to mitigating Na⁺ accumulation in deeper soil profiles. These findings highlight the critical importance of selecting appropriate soil amendments and optimizing their application rates to improve saline water use efficiency and promote sustainable management of saline-alkali soils. Full article

The safe immobilization of high-level waste (as actinide) remains a critical bottleneck in the disposal of high-level radioactive waste worldwide. Moreover, the higher specific surface area and surface energy of nano-scale powders enable the production of ceramic materials featuring denser crystal structures and superior strength, hardness, and toughness. Therefore, in this study, Gd³⁺ was used as a surrogate for actinides, and Nb⁵⁺ was introduced as a high-valence charge-compensating cation. Nano-scale powders of CaCO₃, ZrO₂, Gd₂O₃, TiO₂, and Nb₂O₅ were employed to prepare a series of defect-fluorite-derived ceramics, CaZr_1-xGd_xTi_2-xNb_xO₇ (x = 0.1–1.0), via a high-temperature solid-state reaction method, aiming to investigate the atomic substitution mechanisms, phase evolution, and chemical stability under high-valence charge compensation. Laboratory X-ray diffraction (XRD), synchrotron X-ray diffraction (SXRD), and backscattered scanning electron microscopy with energy-dispersive X-ray spectroscopy (BSEM-EDX) confirmed a phase evolution sequence from zirconolite-2M to zirconolite-4M and finally to pyrochlore. This behavior is consistent with that reported for other Ln³⁺-Nb⁵⁺ co-doped zirconolite systems. Rietveld refinement of the SXRD data further revealed, for the first time, the site-occupancy mechanism of Gd and Nb in zirconolite-4M. In both zirconolite-2M and zirconolite-4M, Gd preferentially occupies the Ca sites, whereas Nb substitutes at the Ti sites. In the pyrochlore structure, Ca, Zr, and Gd occupy the 16d sites, while Ti and Nb occupy the 16c sites. Static leaching tests following the MCC-1 protocol showed that pyrochlore exhibits the highest leaching resistance, whereas zirconolite-2M shows the lowest. After 28 days, the highest Gd leaching rate was 1.92(1) × 10⁻⁵ g m⁻² d⁻¹. These results provide new insights into actinide immobilization behavior and compositional design in zirconolite-based waste forms. Full article

Heavy metal pollution from coal gangue severely degrades mine soil structure and threatens landscape ecological stability. Particularly, γ-polyglutamic acid (γ-PGA), a green biopolymer, offers potential applications for pollution remediation while supporting ecological restoration. To evaluate γ-PGA’s efficacy in immobilizing Pb, Cd, and Zn in gangue-based soil and clarify its regulatory mechanism for landscape-friendly remediation, soil samples from a 3-year-weathered gangue hill in the Liupanshui mining area were subjected to indoor leaching experiments with different γ-PGA doses, combined with material characterization and Density Functional Theory (DFT) simulations. The results showed that the optimal γ-PGA dose was 6 g/kg, achieving 93.25% Pb immobilization and reducing Cd/Zn migration risk by over 30%; γ-PGA acted via carboxyl-amide dual-site chelation and hydrogen-bonded agglomeration, forming stable aggregates that inhibited metal migration. DFT calculations confirmed strong chelation for Cu²⁺ (−59.54 kcal/mol, BSSE-corrected: −57.23 kcal/mol), while Pb²⁺ and Cd²⁺ showed weaker binding (−8.32 kcal/mol and −5.67 kcal/mol, BSSE-corrected: −6.15 kcal/mol and −3.89 kcal/mol, respectively), indicating multi-pathway immobilization mechanisms. This study provides a theoretical basis for applying γ-PGA in mine landscape ecological restoration. Full article

Heavy metal contamination in soil and the resulting groundwater pollution are common at many brownfield sites. Soil washing, which dissolves contaminants into a washing solution to separate them from the soil matrix, has emerged as a promising remediation strategy. This study assessed the feasibility of applying soil washing to Pb-contaminated soil collected from an industrial area within the Trieste Port Authority (Italy) through a series of leaching tests. Batch tests were conducted using ethylenediaminetetraacetic acid (EDTA)-based extractants combined with various reducing agents to identify the most effective and environmentally sustainable washing solution. The results show that coupling EDTA with hydroxylamine hydrochloride or sodium dithionite significantly enhanced Pb solubilisation compared with EDTA alone, with dithionite emerging as the most suitable reducing agent due to its lower toxicity and reduced environmental impact. Sequential extraction tests revealed that up to 50% of total Pb could be removed after repeated washing cycles. Column leaching tests further confirmed the high efficiency of the EDTA–sodium dithionite system, achieving Pb removal rates of approximately 70% under continuous flow conditions. Overall, the results demonstrate that EDTA combined with low-dose sodium dithionite provides an effective and practical remediation strategy for heavily polluted industrial soils. Full article

Zinc oxide nanoparticles (ZnO NPs) exhibit strong and broad-spectrum antibacterial properties, making them a promising agent for textile applications. However, their weak adhesion to fibers and poor washing durability have hindered practical use. In this work, we report zinc/catechol resin-based microspheres (Zn/CFRs) synthesized via a one-pot hydrothermal route and applied to cotton fabric through a pad-dry-cure process. The resulting Zn/CFRs exhibit a monodisperse spherical morphology, with zinc ions concentrated on the surface and ZnO NPs encapsulated within the resin matrix. The finished fabric demonstrates potent, non-leaching antibacterial activity, achieving over 99.99% inhibition against S. aureus, E. coli, and C. albicans, with excellent performance retention even after 50 laundering cycles. Furthermore, we observed that catechol oxidation in the Zn/CFRs proceeds slowly under UV light, which may contribute to the durable adhesion of the coating. Moreover, the functional finishing does not compromise the fabric’s tensile strength, hand feel, or breathability, which positions it favorably for scalable adoption in functional textile manufacturing. Full article

Wireless sensor networks (WSNs) are fundamental to the Internet of Things (IoT) and are widely used in environmental, industrial, and healthcare applications. However, their operational lifetime is constrained by the limited energy resources of sensor nodes. The Low-Energy Adaptive Clustering Hierarchy (LEACH) protocol reduces energy consumption through clustering but suffers from random cluster head (CH) selection, leading to uneven energy usage and reduced stability. This study introduces a hybrid optimization approach, LEACH-CSA, which integrates the Crow Search Algorithm (CSA) with LEACH to enhance CH selection and positioning. The proposed method employs CSA’s intelligent search behavior to minimize intra-cluster distances and balance energy consumption across nodes. MATLAB simulations with 100 sensor nodes in a 100 × 100 m² area demonstrate that LEACH-CSA significantly reduces energy consumption and extends network lifetime compared with LEACH and its variants. Furthermore, CSA parameters were optimized using a progressive randomized tuning strategy with 1000, 2000, and 4000 candidate configurations. A comparative evaluation against LEACH-based GA, PSO, GWO, and WOA demonstrated that LEACH-CSA consistently improved the FND metric under different node density and area-scaling scenarios. Full article