Search Results (24)

Zeolites with different structures (P1, sodalite, and X) were synthesized from coal fly ash by applying ultrasonically assisted hydrothermal and fusion–hydrothermal synthesis. Bimetallic catalysts, containing 5 wt.% Ni and 2.5 wt.% Cu, supported on the zeolites, were prepared by a post-synthesis incipient wetness impregnation method. The catalysts were characterized by X-ray powder diffraction (XRPD), N₂ physisorption, transmission electron microscopy (TEM), Mössbauer and X-ray photoelectron spectroscopies (XPS), and H₂–temperature-programmed reduction (H₂-TPR) analyses. The XRPD results showed that crystalline Cu⁰ and Ni_xCu_y intermetallic nanoparticles were formed in the reduced catalysts. The presence of the intermetallic phase affected the reducibility of the nickel by shifting it to a lower temperature, as confirmed by the H₂-TPR curves. Based on the Mössbauer spectroscopic results, it was established that the iron contamination of the coal fly ash zeolites (CFAZs) was distributed in ionic positions of the zeolite lattice and as a finely dispersed iron oxide phase on the external surface of the supports. The formation of the NiFe alloy, not detectable by XRPD, was also evidenced on the impregnated samples. The catalysts were studied in the upgrading of levulinic acid (LA), derived from lignocellulosic biomass, to γ-valerolactone (GVL), in a batch reactor under 30 bar H₂ pressure at 150 and 200 °C, applying water as a solvent. The NiCu/SOD and NiCu/X catalysts showed total LA conversion and a high GVL yield (>75%) at a reaction temperature of 200 °C. It was found that the textural parameters of the catalysts have less influence on the catalytic activity, but rather the stable dispersion of metals during the reaction. The characterization of the spent catalyst found the rearrangement of the support structure. The high LA conversion and GVL yield can be attributed to the weak acidic character of the support and the moderate hydrogenation activity of the Ni-Cu sites with high dispersion. Full article

Hexachlorobenzene (HCB) is one of the most persistent environmental pollutants of global concern. Ni/Fe nanoparticles, with their small particle size, large surface area, and high reactivity, are a promising candidate for HCB degradation. In this work, we investigated the kinetics and products of the dechlorination of HCB by Ni/Fe nanoparticles and how the presence of heavy metal ions Cd(Ⅱ) and Zn(Ⅱ) influences the reaction. It is found that 400 μg/L HCB can be rapidly removed by 7.5 g/L Ni/Fe nanoparticles and the removal percentage reaches 99% in 48 h. The removal is facilitated by adsorption and sequential dechlorination of HCB, producing PCB, 1,2,3,4-TeCB, and 1,2,3-TCB as the main products, with 1,2,3,5/1,2,4,5-TeCB, 1,2,4-TCB, and 1,2-DCB as the minor products. The addition of heavy metal ions Cd(Ⅱ) and Zn(Ⅱ) does not significantly affect the removal rate of HCB but hinders the adsorption and degradation of the byproducts through competitive adsorption. Additionally, the concentration of both Cd(Ⅱ) and Zn(Ⅱ) decreases rapidly and achieves over 98% removal in 4 h. Our study reveals that Ni/Fe nanoparticles can remove HCB and heavy metals Cd(Ⅱ) and Zn(Ⅱ) concurrently, with the extent of HCB dechlorination reduced compared to that without heavy metal. These findings may inform the application of Ni/Fe nanoparticles in the treatment of water bodies and soil contaminated by both halogenated aromatics and heavy metal. Full article

This study focuses on the synthesis and evaluation of carbon−coated Ni−Fe alloy catalysts (NiFe_x@C, x = 0, 0.3, 0.7, 1.1) for the hydrogenation of cinnamaldehyde. The catalysts were characterized using Transmission Electron Microscopy (TEM), X-ray Diffraction (XRD), Raman spectroscopy, and X-ray Photoelectron Spectroscopy (XPS). The introduction of Fe was found to increase the average particle size of the bimetallic catalysts compared to the monometallic Ni@C. Ni existed in both metallic and oxide states, while Fe exhibited multiple oxidation states in the bimetallic catalysts. The carbon layer, approximately 2–3 nm thick, was confirmed to envelop the alloy particles. The catalytic performance of carbon−coated Ni−Fe alloy catalysts indicated that the addition of Fe to Ni@C enhanced the selectivity towards hydrocinnamaldehyde (HCAL), with NiFe_0.7@C showing the highest selectivity (~88.6%) but at a reduced conversion rate. The carbon layer played a pivotal role in the stability and reusability of the catalysts. NiFe_0.7@C maintained consistent performance over multiple reaction cycles, while NiFe_0.7 NPs (without a carbon layer) exhibited significant deactivation. Both catalysts displayed strong magnetism, facilitating easy separation from the reaction mixture. This study sheds light on the significance of the carbon layer in bimetallic catalysts and provides valuable insights for designing efficient catalysts for hydrogenation processes. Full article

The incorporation of the metal phase into cellulose hydrogels, resulting in the formation of metallogels, greatly expands their application potential by introducing new functionalities and improving their performance in various fields. The unique antiviral, antibacterial, antifungal, and anticancer properties of metal and metal oxide nanoparticles (Ag, Au, Cu, Cu_xO_y, ZnO, Al₂O₃, TiO₂, etc.), coupled with the biocompatibility of cellulose, allow the development of composite hydrogels with multifunctional therapeutic potential. These materials can serve as efficient carriers for controlled drug delivery, targeting specific cells or pathogens, as well as for the design of artificial tissues or wound and burn dressings. Cellulose-based metallogels can be used in the food packaging industry to provide biodegradable and biocidal materials to extend the shelf life of the goods. Metal and bimetallic nanoparticles (Au, Cu, Ni, AuAg, and AuPt) can catalyze chemical reactions, enabling composite cellulose hydrogels to be used as efficient catalysts in organic synthesis. In addition, metal-loaded hydrogels (with ZnO, TiO₂, Ag, and Fe₃O₄ nanoparticles) can exhibit enhanced adsorption capacities for pollutants, such as dyes, heavy metal ions, and pharmaceuticals, making them valuable materials for water purification and environmental remediation. Magnetic properties imparted to metallogels by iron oxides (Fe₂O₃ and Fe₃O₄) simplify the wastewater treatment process, making it more cost-effective and environmentally friendly. The conductivity of metallogels due to Ag, TiO₂, ZnO, and Al₂O₃ is useful for the design of various sensors. The integration of metal nanoparticles also allows the development of responsive materials, where changes in metal properties can be exploited for stimuli-responsive applications, such as controlled release systems. Overall, the introduction of metal phases augments the functionality of cellulose hydrogels, expanding their versatility for diverse applications across a broad spectrum of industries not envisaged during the initial research stages. Full article

Bimetallic FeCo and FeNi nanoparticles attract much attention due to their promising magnetic properties and a wide range of practical applications as recording and storage media, catalytic systems in fuel cells, supercapacitors, lithium batteries, etc. In this paper, we propose an original approach to the preparation of FeCo- and FeNi/N-doped carbon nanocomposites by means of a coupled process of frontal polymerization and thermolysis of molecular co-crystallized acrylamide complexes. The phase composition, structure, and microstructure of the resulting nanocomposites are studied using XRD, IR spectroscopy, elemental and thermal analysis, and electron microscopy data. The main magnetic characteristics of the synthesized nanocomposites, including the field dependences and the ZFC-FC curves peculiarities, are studied. It is shown that the obtained FeCo/N-C nanocomposites exhibit exchange bias behavior at low temperatures. In turn, FeNi/N-C nanocomposites are ferromagnetically ordered. Full article

Bimetallic nanocomposites and nanoparticles have received tremendous interest recently because they often exhibit better properties than single-component materials. Improved electron transfer rates and the synergistic interactions between individual metals are two of the most beneficial attributes of these materials. In this review, we focus on bimetallic nanoporous gold (NPG) because of its importance in the field of electrochemical sensing coupled with the ease with which it can be made. NPG is a particularly important scaffold because of its unique properties, including biofouling resistance and ease of modification. In this review, several different methods to synthesize NPG, along with varying modification approaches are described. These include the use of ternary alloys, immersion–reduction (chemical, electrochemical, hybrid), co-electrodeposition–annealing, and under-potential deposition coupled with surface-limited redox replacement of NPG with different metal nanoparticles (e.g., Pt, Cu, Pd, Ni, Co, Fe, etc.). The review also describes the importance of fully characterizing these bimetallic nanocomposites and critically analyzing their structure, surface morphology, surface composition, and application in electrochemical sensing of chemical and biochemical species. The authors attempt to highlight the most recent and advanced techniques for designing non-enzymatic bimetallic electrochemical nanosensors. The review opens up a window for readers to obtain detailed knowledge about the formation and structure of bimetallic electrodes and their applications in electrochemical sensing. Full article

Copper and iron-based bimetallic nickel catalysts supported on Mesostructured Silica Nanoparticles (MSNs) with compositions of 50% Ni–5% Cu/MSN and 50% Ni–5% Fe/MSN were prepared using an impregnation method, and they were compared with a monometallic 50% Ni–MSN catalyst for their activity and stability in methane decomposition reaction. The influence of promoters, such as Cu and Fe, at different reaction temperatures (700 °C, 800 °C and 900 °C) was investigated. The results revealed that the Cu and Fe-promoted catalysts significantly increased the hydrogen yield in methane decomposition compared with the unpromoted catalyst. This could be attributed to the formation of Ni–Cu and Ni–Fe bimetallic alloys in the catalysts, respectively, and this favored the stability of the catalysts. With increasing reaction temperature, the hydrogen yield also increased. However, the hydrogen yield and the lifetime of the nickel catalyst were enhanced upon the addition of iron compared to copper at all the reaction temperatures. The analysis conducted over the spent catalysts validated the formation of multi-walled carbon nanotubes with a bamboo-like internal channel over the catalysts along with a high crystallinity and graphitization degree of the carbon produced. Full article

The development of stable and efficient electrocatalysts for oxygen evolution reaction is of great significance for electro-catalytic water splitting. Bimetallic layered double hydroxides (LDHs) are promising OER catalysts, in which NiCu LDH has excellent stability compared with the most robust NiFe LDH, but the OER activity is not satisfactory. Here, we designed a NiCu LDH heterostructure electrocatalyst (Cu/NiCu LDH) modified by Cu nanoparticles which has excellent activity and stability. The Cu/NiCu LDH electrocatalyst only needs a low over-potential of 206 mV and a low Tafel slope of 86.9 mV dec⁻¹ at a current density of 10 mA cm⁻² and maintains for 70 h at a high current density of 100 mA cm^–2 in 1M KOH. X-ray photoelectron spectroscopy (XPS) showed that there was a strong electronic interaction between Cu nanoparticles and NiCu LDH. Density functional theory (DFT) calculations show that the electronic coupling between Cu nanoparticles and NiCu LDH can effectively improve the intrinsic OER activity by optimizing the conductivity and the adsorption energy of oxygen-containing intermediates. Full article

Monometallic catalysts based on Fe, Ni and Pd, as well as bimetallic catalysts based on Fe-Pd and based on Ni-Pd supported on silica, were synthesized using a sol–gel cogelation process. These catalysts were tested in chlorobenzene hydrodechlorination at low conversion to consider a differential reactor. In all samples, the cogelation method allowed very small metallic nanoparticles of 2–3 nm to be dispersed inside the silica matrix. Nevertheless, the presence of some large particles of pure Pd was noted. The catalysts had specific surface areas between 100 and 400 m²/g. In view of the catalytic results obtained, the Pd-Ni catalysts are less active than the monometallic Pd catalyst (<6% of conversion) except for catalysts with a low proportion of Ni (9% of conversion) and for reaction temperatures above 240 °C. In this series of catalysts, increasing the Ni content increases the activity but leads to an amplification of the catalyst deactivation phenomenon compared to Pd alone. On the other hand, Pd-Fe catalysts are more active with a double conversion value compared to a Pd monometallic catalyst (13% vs. 6%). The difference in the results obtained for each of the catalysts in the Pd-Fe series could be explained by the greater presence of the Fe-Pd alloy in the catalyst. Fe would have a cooperative effect when associated with Pd. Although Fe is inactive alone for chlorobenzene hydrodechlorination, when Fe is coupled to another metal from the group VIIIb, such as Pd, it allows the phenomenon of Pd poisoning by HCl to be reduced. Full article

The synthesis of bimetallic iron-nickel nanoparticles with control over the synthesized phases, particle size, surface chemistry, and oxidation level remains a challenge that limits the application of these nanoparticles. Pulsed laser ablation in liquid allows the properties tuning of the generated nanoparticles by changing the ablation solvent. Organic solvents such as acetone can minimize nanoparticle oxidation. Yet, economical laboratory and technical grade solvents that allow cost-effective production of FeNi nanoparticles contain water impurities, which are a potential source of oxidation. Here, we investigated the influence of water impurities in acetone on the properties of FeNi nanoparticles generated by pulsed laser ablation in liquids. To remove water impurities and produce “dried acetone”, cost-effective and reusable molecular sieves (3 Å) are employed. The results show that the Fe₅₀Ni₅₀ nanoparticles’ properties are influenced by the water content of the solvent. The metastable HCP FeNi phase is found in NPs prepared in acetone, while only the FCC phase is observed in NPs formed in water. Mössbauer spectroscopy revealed that the FeNi nanoparticles oxidation in dried acetone is reduced by 8% compared to acetone. The high-field magnetization of Fe₅₀Ni₅₀ nanoparticles in water is the highest, 68 Am²/kg, followed by the nanoparticles obtained after ablation in acetone without water impurities, 59 Am²/kg, and acetone, 52 Am²/kg. The core-shell structures formed in these three liquids are also distinctive, demonstrating that a core-shell structure with an outer oxide layer is formed in water, while carbon external layers are obtained in acetone without water impurity. The results confirm that the size, structure, phase, and oxidation of FeNi nanoparticles produced by pulsed laser ablation in liquids can be modified by changing the solvent or just reducing the water impurities in the organic solvent. Full article

Paraquat (PQ) has high acute toxicity, even at low concentrations. For most people, the main pathway of exposure to PQ is through the diet. Therefore, the development of simple and efficient methods for PQ testing is critical for ensuring food safety. In this study, a new electrochemical detection strategy for paraquat is proposed based on the specific binding of PQ to its nucleic acid aptamer. Firstly, the Zn/Fe bimetallic ZIF derived nanoporous carbon (Zn/Fe-ZIF-NPC) and nickel hexacyanoferrate nanoparticles (NiHCF-NPs) were sequentially modified onto the glassy carbon electrode (GCE). NiHCF-NPs served as the signal probes, while Zn/Fe-ZIF-NPC facilitated electron transfer and effectively enhanced the sensing signal of NiHCF-NPs. Au nanoparticles (AuNPs) were then electrodeposited on the NiHCF-NPs/Zn/Fe-ZIF-NPC/GCE and then the thiolated aptamer was assembled on the AuNPs/NiHCF-NPs/Zn/Fe-ZIF-NPC/GCE via Au-S bonding. When incubated with PQ, the formation of PQ–aptamer complexes delayed the interfacial electron transport reaction of NiHCF-NPs, which caused a decrease in the current signals. As a result, simple and highly sensitive detection of PQ can be readily achieved by detecting the signal changes. A linear range was obtained from 0.001 to 100 mg/L with a detection limit as low as 0.34 μg/L. Due to the recognition specificity of the aptamer to its target molecule, the proposed method has excellent anti-interference ability. The prepared electrochemical aptasensor was successfully used for PQ assay in lettuce, cabbage and agriculture irrigation water samples with recoveries ranging from 96.20% to 104.02%, demonstrating the validity and practicality of the proposed method for PQ detection in real samples. Full article

Hydrogenation of sugars to sugars alcohols is of prime interest for food applications for instance. Xylose obtained from the hemicellulose fraction of lignocellulosic biomass can be hydrogenated to xylitol. Herein, we conducted catalytic hydrogenation reactions in a non-conventional media approach by using choline chloride, a non-toxic naturally occurring organic compound that can form a deep eutectic solvent with xylose. Acknowledging the benefits of cost-effective transition metal-based alloys, Ni₃Fe₁ bimetallic nanoparticles were utilized as a hetero-catalyst. Under optimized reaction conditions (110 °C, 3 h and 30 bar H₂), a highly concentrated feed of xylose (76 wt.%) was converted to 80% of xylitol, showing the benefit of using choline chloride. Overall, the catalytic conversion activity and the product selectivity in the substrate-assisted DES media are relatively high but, the recyclability of the catalyst should be improved in the presence of such media. Full article

The search for a simple and effective method to remove organic dyes and color intermediates that threaten human safety from the water environment is urgent. Herein, we report a simple method for constructing iron/nickel phosphide nanocrystals anchored on N-B-doped carbon-based composites, using steam-exploded poplar (SEP) and graphene oxide (GO) as a carrier. The stability and catalytic activity of N-B-Ni_xFe_yP/SEP and GO were achieved by thermal conversion in a N₂ atmosphere and modifying the Fe/Ni ratio in gel precursors. N-B-Ni₇Fe₃P/SEP was employed for the catalytic hydrogenation of 4-nitrophenol (4-NP) and methylene blue (MB), using sodium borohydride in aqueous media at room temperature. This showed much better catalytic performances in terms of reaction rate constant (0.016 S⁻¹ and 0.041 S⁻¹, respectively) and the activity factor, K (1.6 S⁻¹·g⁻¹ and 8.2 S⁻¹·g⁻¹, respectively) compared to the GO carrier (0.0053 S⁻¹ and 0.035 S⁻¹ for 4-NP and MB, respectively). The strong interaction between the carrier’s morphology and structure, and the vertically grown bimetallic phosphide nanoclusters on its surface, enhances charge transfer, electron transfer kinetics at the interface and Ni-Fe phosphide dispersion on the nanoclusters, and prevents dissolution of the nanoparticles during catalysis, thereby improving stability and achieving catalysis durability. These findings provide a green and simple route to efficient catalyst preparation and provide guidance for the rational selection of catalyst carriers. Full article

Attapulgite (ATP) disaggregated by a ball milling–freezing process was used to support Fe/Ni bimetallic nanoparticles (nFe/Ni) to obtain a composite material of D-ATP-nFe/Ni for the dechlorination degradation of 2,4-dichlorophenol (2,4-DCP), thus improving the problem of agglomeration and oxidation passivation of nanoscale zero-valent iron (nFe) in the dechlorination degradation of chlorinated organic compounds. The results show that Fe/Ni nanoparticle clusters were dispersed into single spherical particles by the ball milling–freezing-disaggregated attapulgite, in which the average particle size decreased from 423.94 nm to 54.51 nm, and the specific surface area of D-ATP-nFe /Ni (97.10 m²/g) was 6.9 times greater than that of nFe/Ni (14.15 m²/g). Therefore, the degradation rate of 2,4-DCP increased from 81.9% during ATP-nFe/Ni application to 96.8% during D-ATP-nFe/Ni application within 120 min, and the yield of phenol increased from 57.2% to 86.1%. Meanwhile, the reaction rate K_obs of the degradation of 2,4-DCP by D-ATP-nFe/Ni was 0.0277 min⁻¹, which was higher than that of ATP-nFe/Ni (0.0135 min⁻¹). In the dechlorination process of 2,4-DCP by D-ATP-nFe/Ni, the reaction rate for the direct dechlorination of 2,4-DCP of phenol (k₅ = 0.0156 min⁻¹) was much higher than that of 4-chlorophenol (4-CP, k₂ = 0.0052 min⁻¹) and 2-chlorophenol (2-CP, k₁ = 0.0070 min⁻¹), which suggests that the main dechlorination degradation pathway for the removal of 2,4-DCP by D-ATP-nFe/Ni was directly reduced to phenol by the removal of two chlorine atoms. In the secondary pathway, the removal of one chlorine atom from 2,4-DCP to generate 2-CP or 4-CP as intermediate was the rate controlling step. The final dechlorination product (phenol) was obtained when the dechlorination rate accelerated with the progress of the reaction. This study contributes to the broad topic of organic pollutant treatment by the application of clay minerals. Full article

Chlorinated organic solvents (COSs) are a significant threat to human beings. In this study, nanoscale bimetallic Ni/Fe particles were synthesized from the reaction of sodium borohydride (NaBH₄) with the reduction of Ni²⁺ and Fe²⁺ in an aqueous solution. The synthesized nanoscale zero-valent iron (nZVI) and Ni-nZVI were characterized by SEM (scanning electron microscopy), XRD (X-ray diffractometer), Brunauer–Emmett–Teller (BET), and transmission electron microscopy (TEM). The removal performance of trichloroethylene (TCE) over the nZVI catalyst and Ni-nZVI was evaluated. Ni-nZVI with different Ni contents exhibited good reactivity towards the dechlorination of TCE over a 1h period, and the pseudo-first-order rate constant for TCE dechlorination by Ni-nZVI was 1.4–3.5 times higher than that of nZVI. Ni-nZVI with 5 wt% Ni contents exhibited the best dechlorination effect; the removal rates of TCE and its by-product dichloroethylene (DCE) were 100% and 63.69%, respectively. These results indicated that the Ni nanoparticles as the second dopant metal were better than nZVI for TCE degradation. This determination of the optimal Ni-NZVI load ratio provides a factual and theoretical basis for the subsequent application of nano-metal binding in the environment. Full article