Search Results (917)

As key components of the climate system, clouds exert a significant influence on the Earth’s radiation budget and hydrological cycle. However, studies focusing on cloud properties over Central Asia are still limited, and the impacts of cloud variability on regional temperature and precipitation remain poorly understood. This study uses reanalysis and multi-source remote sensing datasets to investigate the spatiotemporal characteristics of clouds and their influence on regional climate. The cloud cover increases from the southwest to the northeast, with mid and low-level clouds predominating in high-altitude regions. All clouds have shown a declining trend during 1981–2020. According to satellite data, the sharpest decline in total cloud cover occurs in summer, while reanalysis data show a more significant reduction in spring. In addition, cloud cover changes influence the local climate through radiative forcing mechanisms. Specifically, the weakening of shortwave reflective cooling and the enhancement of longwave heating of clouds collectively exacerbate surface warming. Meanwhile, precipitation is positively correlated with cloud cover, and its spatial distribution aligns with the cloud water path. The cloud phase composition in Central Asia is dominated by liquid water, accounting for over 40%, a microphysical characteristic that further impacts the regional hydrological cycle. Full article

Synthetic aperture radar (SAR) systems are of paramount importance to remote sensing applications, including Earth observation and environmental monitoring. Accurate calibration of these systems is imperative to ensuring the accuracy and reliability of the acquired data. A central component of the calibration process is the antenna model, which serves as a fundamental reference for characterizing the radiation pattern, gain, and overall performance of SAR systems. The present paper sets out to describe the implementation and validation of a phased-array antenna model for Synthetic Aperture Radar Systems (SARAS) in MATLAB R2024a. The antenna model was developed for utilization in the Spanish Earth observation missions PAZ and PRECURSOR-ECO. The antenna model incorporates a number of functions, which are divided into two primary modules: the first of these is the antenna pattern generation (APG) module, and the second is the antenna excitation generation (AEG) module. The present document focuses on the AEG, the function of which is to generate patterns for all required beams. These patterns are optimized and matched to specific calculated masks using an ad hoc genetic algorithm (GA). In consideration of the aforementioned factors, the AEG module generates a set of complex excitations corresponding to the required beam from different satellite operational beams, based on several radiometrically defined parameters.  Full article

Photocatalytic redox processes significantly contribute to shaping Earth’s surface environment. Semiconductor minerals exhibiting favorable photocatalytic properties are ubiquitous on rock and soil surfaces. However, the sunlight-responsive characteristics and functions of TiO₂, an excellent photocatalytic material, within natural systems remain incompletely understood, largely due to its wide bandgap limiting solar radiation absorption. This study analyzed surface coating samples, determining their elemental composition, distribution, and mineralogy. The analysis revealed enrichment of anatase TiO₂ and β-carotene. Informed by these observations, laboratory simulations were designed to investigate the synergistic effect of β-carotene on the sunlight-responsive behavior of anatase. Results demonstrate that β-carotene-sensitized anatase exhibited a 64.4% to 66.1% increase in photocurrent compared to pure anatase. β-carotene sensitization significantly enhanced anatase’s electrochemical activity, promoting rapid electron transfer. Furthermore, it improved interfacial properties and acted as a photosensitizer, boosting photo-response characteristics. The sensitized anatase displayed a distinct absorption peak within the 425–550 nm range, with visible light absorption increasing by approximately 17.75%. This study elucidates the synergistic mechanism enhancing the sunlight response between anatase and β-carotene in natural systems and its broader environmental implications, providing new insights for research on photocatalytic redox processes within Earth’s critical zone. Full article

The fraction of absorbed photosynthetically active radiation (FAPAR) stands as a pivotal parameter within the Earth system, quantifying the energy exchange between vegetation and solar radiation. Accordingly, there is an urgent need for comprehensive validation studies to accurately quantify uncertainties and improve the reliability of FAPAR-based applications. This study validated five global FAPAR products, MOD15A2H, MYD15A2H, VNP15A2H, GEOV2, and GEOV3, over four boreal forest sites in North America. Qualitative quality flags (QQFs) and quantitative quality indicators (QQIs) of each product were analyzed. Time series high-resolution reference FAPAR maps were developed using the Harmonized Landsat and Sentinel-2 dataset. The reference FAPAR maps revealed a strong agreement with the in situ FAPAR from AmeriFlux (correlation coefficient (R) = 0.91; root mean square error (RMSE) = 0.06). The results revealed that global FAPAR products show similar uncertainties (RMSE: 0.16 ± 0.04) and moderate agreement with the reference FAPAR (R = 0.75 ± 0.10). On average, 34.47 ± 6.91% of the FAPAR data met the goal requirements of the Global Climate Observing System (GCOS), while 54.41 ± 6.89% met the threshold requirements of the GCOS. Deciduous forests perform better than evergreen forests, and the products tend to underestimate the reference data, especially for the beginning and end of growing seasons in evergreen forests. There are no obvious quality differences at different QQFs, and the relative QQI can be used to filter high-quality values. To enhance the regional applicability of global FAPAR products, further algorithm improvements and expanded validation efforts are essential. Full article

This paper presents the design, simulation, and experimental validation of a dual-Circularly Polarized (CP) array antenna to be used as single element for a bistatic radar system, aimed at detecting and tracking objects in Low Earth Orbit (LEO). The antenna operates at 412 MHz in reception mode and consists of an array of 19 slotted-patch radiating elements with a cavity-based metallic superstrate, designed to support dual circular polarization. These elements are arranged in a hexagonal configuration, enabling the array structure to achieve a maximum realized gain of 17 dBi and a Side Lobe Level (SLL) below −17 dB while maintaining high polarization purity. Two identical analog feeding networks enable the precise control of phase and amplitude, allowing the independent reception of Right-Hand and Left-Hand Circularly Polarized (RHCP and LHCP) signals. Full-wave simulations and experimental measurements confirm the high performance and robustness of the system, demonstrating its suitability for integration into large-scale Space Situational Awareness (SSA) sensor networks. Full article

In this paper, we present a system-level model of a digital multibeam antenna designed for Low Earth Orbit satellite communications operating in the Ka-band. We initially develop a suitable array topology, which is based on a thinned lattice, then adopt it as the foundation for evaluating its performance within a digital beamforming architecture. This architecture is implemented in a system-level simulator to evaluate the performance of the transmitter and receiver chains. This study advances the analysis of the digital antennas by incorporating both the RF front-end and digital sections non-idealities into a digital-twin framework. This approach enhances the designer’s ability to optimize the system with a holistic approach and provides insights into how various impairments affect the transmitter and receiver performance, identifying the subsystems’ parameter limits. To achieve this, we analyze several subsystems’ parameters and impairments, assessing their effects on both the antenna radiation and quality of the transmitted and received signals in a real applicative context. The results of this study reveal the sensitivity of the system to the impairments and suggest strategies to trade them off, emphasizing the importance of selecting appropriate subsystem features to optimize overall system performance. Full article

The Earth Radiation Budget (ERB), a measure of the difference between incoming solar irradiance and outgoing reflected and emitted radiant energy, is a fundamental property of Earth’s climate system. The Libera satellite mission will measure the ERB’s outgoing components to continue the long-term climate data record established by NASA’s Clouds and the Earth’s Radiant Energy System (CERES) mission. In addition to ensuring data continuity, Libera will introduce a novel split-shortwave spectral channel to quantify the partitioning of the outgoing reflected solar component into visible and near-infrared sub-components. However, converting these split-shortwave radiances into the ERB-relevant irradiances requires the development of split-shortwave Angular Distribution Models (ADMs), which demand extensive angular sampling. Here, we show how Rotating Azimuthal Plane Scan (RAPS) parameters—specifically operational cadence and azimuthal scan rate—affect the observational coverage of a defined scene and angular space. Our results show that for a fixed number of azimuthal rotations, a relatively slow azimuthal scan rate of 0.5° per second, combined with more time spent in the RAPS observational mode, provides a more comprehensive sampling of the desired scene and angular space. We also show that operating the Libera instrument in RAPS mode at a cadence between every fifth day and every other day for the first year of space-based operations will provide sufficient scene and angular sampling for the observations to achieve radiance convergence for the scenes that comprise more than half of the expected Libera observations. Obtaining radiance convergence is necessary for accurate ADMs. Full article

Bivalves are nowadays represented by several thousand species of variable sizes and shapes. Additionally, thousands more species occurred during their 500-million-year long evolution. Present on Earth since the Cambrian, the class Bivalvia experienced periods of gradual evolution, interspersed with periods of rapid changes. Some groups of bivalves, namely clams, oysters, scallops, and marine mussels, managed to survive a series of extinctions, and their descendants still thrive in modern oceans and seas. Other groups, such as the rudists, completely disappeared from marine environments, after undergoing successful evolutionary radiation. In this study, we consider the possible reasons for the longevity of some bivalve orders and discuss the possible causes of demise of several once-successful clades. As expected, a small body size, large number of specimens, infaunal mode of life, motility, and long-living planktonic larvae proved to be evolutionary advantages during stress periods. The ability to harbor chemosymbionts could be an additional benefit during biotic crises. Full article

The impacts of the solar eclipse that occurred on 8 April 2024 over the United States on various atmospheric parameters are investigated. We analyzed surface and vertical profiles of temperature and humidity to understand how this eclipse affected the atmosphere from the ground to the stratosphere. Our findings show a significant response throughout the atmospheric range. The eclipse caused a decrease in shortwave radiation, leading to cooler Earth surfaces and a subsequent drop in surface temperature. This cooling effect also resulted in high relative humidity and lower wind speeds at the surface. Furthermore, GPS radio occultation data from COSMIC-2 revealed a decrease in tropospheric temperature and increase in stratospheric temperature during the eclipse. We also observed a reduction in both the temperature and height of the tropopause. The uniqueness of the present investigations lies in delineating the solar eclipse’s effects on the land and ocean. Our analysis indicates that land regions experienced a more pronounced temperature change compared to ocean regions. Full article

This paper presents an analysis of the impact of conducted and radiated electromagnetic interference affecting the electrical circuits of electronic security systems (ESS) operating over wide areas. The Earth’s electromagnetic environment is heavily distorted by intended and unintended (stationary or non-stationary) sources of radiation. The occurrence of electromagnetic interference in a given environment where an ESS is in use is the cause of damage or malfunction of the entire system or its individual components, e.g., detectors, modules, control panels, etc. In this article, the authors conducted an assessment of the electromagnetic environment where ESS are operated and conducted studies of selected sources of interference. For selected ESS structures, they developed models of the impact of conducted and radiated interference on the process of using these systems in a given environment. For selected technical structures of ESS, the authors of this article developed models of the operation process. They also carried out a computer simulation to determine the impact of natural and artificial electromagnetic interference occurring on the process of using these systems in a given environment over a wide area. The considerations carried out in this article are summarized in the conclusions chapter about the process of using ESS in a distorted electromagnetic environment. Full article

The continuous development of both numerical weather model outputs and remote sensing-derived products has enabled a wide range of applications across various fields, such as agricultural water management, where the need for robust gridded weather data and recurring Earth Observations (EO) is fundamental for estimating crop water requirements (CWR) and yield. This study used the latest reanalysis dataset, AgERA5, combined with the up-to-date CM SAF SARAH-3 Satellite-Based Radiation Data as meteorological inputs of the SAFY dynamic crop growth model and a one-step evapotranspiration formula for CWR and yield estimates at the farm scale of tomato crops. The Sentinel-2 (S2) estimates of Leaf Area Index (LAI) were used to force the SAFY model as soon as they became available during the growing stage, according to the satellite passages over the area of interest. The SAFY model was calibrated with ground-based weather observations and S2 LAI data on tomato crops that were collected in several farms in Campania Region (Southern Italy) during the irrigation season, which spans from April to August. To validate the method, the model estimates were compared with field observations of irrigation volumes and harvested yield from a monitored farm in the same region for the year 2021. Results demonstrated that integrating AgERA5 and CM SAF weather datasets with S2 imagery for assimilation into the SAFY model enables accurate estimates of both CWR and yield. Full article

This paper focuses on the triple-junction gallium arsenide solar array of a MEO (Medium Earth Orbit) satellite that has been in orbit for 7 years. Through a combination of theoretical and data-driven methods, it conducts research on anti-radiation design verification and life prediction. This study integrates the Long Short-Term Memory (LSTM) algorithm into the full life cycle management of MEO satellite solar arrays, providing a solution that combines theory and engineering for the design of high-reliability energy systems. Based on semiconductor physics theory, this paper establishes an output current calculation model. By combining radiation attenuation factors obtained from ground experiments, it derives the theoretical current values for the initial orbit insertion and the end of life. Aiming at the limitations of traditional physical models in addressing solar performance degradation under complex radiation environments, this paper introduces an LSTM algorithm to deeply mine the high-density current telemetry data (approximately 30 min per point) accumulated over 7 years in orbit. By comparing the prediction accuracy of LSTM with traditional models such as Recurrent Neural Network (RNN) and Feedforward Neural Network (FNN), the significant advantage of LSTM in capturing the long-term attenuation trend of solar arrays is verified. This study integrates deep learning technology into the full life cycle management of solar arrays, constructs a closed-loop verification system of “theoretical modeling–data-driven intelligent prediction”, and provides a solution for the long-life and high-reliability operation of the energy system of MEO orbit satellites. Full article

Aviation is widely recognised to have global-scale climate impacts through the formation of ozone (O₃) in the upper troposphere and lower stratosphere (UTLS), driven by emissions of nitrogen oxides (NO_X). Ozone is known to be one of the most potent greenhouse gases formed from the interaction of aircraft emission plumes with atmospheric species. This paper follows up on previous research, where a Photochemical Trajectory Model was shown to be a robust measure of ozone formation along flight trajectories post-flight. We use a combination of a global Lagrangian chemistry-transport model and a box model to quantify the impacts of aircraft NO_X on UTLS ozone over a five-day timescale. This work expands on the spatial and temporal range, as well as the chemical accuracy reported previously, with a greater range of NO_X chemistry relevant chemical species. Based on these models, route optimisation has been investigated, through the use of network theory and algorithms. This is to show the potential inclusion of an understanding of climate-sensitive regions of the atmosphere on route planning can have on aviation’s impact on Earth’s Thermal Radiation balance with existing resources and technology. Optimised flight trajectories indicated reductions in O₃ formation per unit NO_X are in the range 1–40% depending on the spatial aspect of the flight. Temporally, local winter times and equatorial regions are generally found to have the most significant O₃ formation per unit NO_X; moreover, hotspots were found over the Pacific and Indian Ocean. Full article

Aerosols are critical to the Earth’s atmosphere, influencing climate through interactions with solar radiation and clouds. However, accurately replicating the interactions between aerosols and clouds remains challenging due to the complexity of the physical processes involved. This study evaluated the performance of Coupled Model Intercomparison Project phase 6 (CMIP6) models in simulating aerosol optical depth (AOD), cloud fraction (CF), and liquid water path (LWP) by comparing them with satellite observations from MODIS and AMSR-E. Using 30 years of CMIP6 model simulations and available satellite observations during the satellite era, the results show that most CMIP6 models underestimate CF and LWP by 24.3% for LWP in the Northern Hemisphere. An assessment of spatial patterns indicates that models generally align more closely with observations in the Northern Hemisphere than in the Southern Hemisphere. Latitudinal profiles reveal that while most models capture the overall distribution patterns, they struggle to accurately reproduce observed magnitudes. A quantitative scoring system is applied to evaluate each model’s ability to replicate the spatial characteristics of multi-year mean aerosol and cloud properties. Overall, the findings suggest that CMIP6 models perform better in simulating AOD and CF than LWP, particularly in the Southern Hemisphere. Full article

In this study, the neutron and gamma radiation-shielding properties of serpentinites from the Guleman ophiolite complex were investigated, and results were evaluated in comparison with rare earth element (REE) content. The linear and mass attenuation coefficients (LAC and MAC), half-value layer (HVL), mean free path (MFP), and effective atomic numbers (Z_eff) of serpentinite samples were experimentally measured in the energy range of 80.99–383.85 keV. Theoretical MAC values were calculated. Additionally, fast neutron removal cross-sections, as well as thermal and fast neutron macroscopic cross-sections, were theoretically determined. The absorbed equivalent dose rates of serpentinite samples were also measured. The radiation protection efficiency (RPE) for gamma rays and neutrons were determined. It was observed that the presence of rare earth elements within serpentinite structure has a significant impact on thermal neutron cross-sections, while crystalline water content (LOI) plays an influential role in fast neutron cross-sections. Moreover, it has been observed that the concentration of gadolinium exerts a more substantial influence on the macroscopic cross-sections of thermal neutrons than on those of fast neutrons. The research results reveal the mineralogical, geochemical, morphological and radiation-shielding properties of serpentinite rocks contribute significantly to new visions for the use of this naturally occurring rock as a geological repository for nuclear waste or as a wall-covering material in radiotherapy centers and nuclear facilities instead of concrete. Full article