Clostridium perfringens (C. perfringens) is one of the foremost pathogens responsible for diarrhea in foals. As antibiotic resistance increases, phages that specifically lyse bacteria are of great interest to us with regard to C. perfringens. In this...
The aim of the article is to analyze the possibilities of using a lightweight dynamic cone probe DCP to determine the quality of compaction of surface layers of embankments (from 0.10 m to approx. 0.80 m below ground level). For this purpose, compara...
The dynamic potentials of highly excited vibrational states of deuterated phosphaethyne (DCP) in the D–C and C–P stretching coordinates with anharmonicity and Fermi coupling are studied in this article and the results show that the D-C-P bending vibr...
This study proposes a theoretical method to estimate the impact force of Derailment Containment Provisions (DCPs) for the prevention of secondary collisions in the event of a train derailment. By comparing the impact forces estimated using the common...
DCP-001 is a cell-based cancer vaccine generated by differentiation and maturation of cells from the human DCOne myeloid leukemic cell line. This results in a vaccine comprising a broad array of endogenous tumor antigens combined with a mature dendri...
With the goal of improving the quality of model-based development and to reduce testing effort, DevOps practices have gained more and more importance. However, most system engineers are not DevOps specialists, and there are a lot of manual steps invo...
In this study, the catalytic performance of the Fenton sludge iron-based biochar catalyst (Fe@BC700), generated during the Fenton process, was investigated regarding its role in oxidizing 2,4-dichlorophenol (2,4-DCP) and As(III) from aqueous solution...
This study investigates the correlation between the California Bearing Ratio (CBR) and the Dynamic Cone Penetrometer (DCP) for subgrade soil analysis. The paper aims to provide practical equations for predicting CBR values from DCP test results, ther...
Three-dimensional concrete printing (3DCP) is a sustainable and green approach for rapid construction with the ability to create complex shapes to preserve the intended aesthetic appearance for an affordable cost. Even after a decade of attempts, the...
The article presents the results of a comprehensive study of the use of 3D Concrete printing (3DCP) technology to create urban infrastructure facilities according to sustainable development principles. The work includes a study of scientific articles...
The aim of this work is to give an overview of existing methods and to introduce three new methods for the determination of the Dendrite Coherency Point (DCP) for AlSi10Mg alloys, as well as to compare the acquired values of DCP based on a thermal an...
A new turn-on probe (SWJT-20) based on isophorone fluorophore for the detection of nerve agent mimic diethyl chlorophosphite (DCP) was designed and synthesized. SWJT-20 could rapidly respond to DCP within 2 s using UV-Vis or fluorescent spectra, acco...
The benefits of 3D concrete printing (3DCP) include reducing construction time and costs, providing design freedom, and being environmentally friendly. This technology is expected to be effective in addressing the global house shortage. This review h...
3D Concrete Printing (3DCP) technology is rapidly gaining popularity in the construction industry, particularly for transportation infrastructure such as bridges. Unlike traditional construction methods, this innovative approach eliminates the need f...
In recent years, three dimensional concrete printing (3DCP) has gained traction as a promising technology to mitigate the carbon footprint associated with construction industry. However, despite its environmental benefits, studies frequently overlook...
Background: The tangential traction by idiopathic epiretinal membrane (iERM) may alter the hemodynamics of the macula. We investigated the correlation between visual acuity and the optical coherence tomography angiography (OCTA) parameters in unilate...
A novel two-site chemodosimeter (SWJT-4) based on fluorescein skeleton to detect diethyl chlorophosphate (DCP) was designed and synthesized. It is a turn-on fluorescent probe for DCP with good selectivity and obvious color change in aqueous solution....
Regular monitoring of blood α-fetoprotein (AFP) and/or carcino-embryonic antigen (CEA) levels is important for the routine screening of liver cancer. However, AFP and CEA have a much lower specificity than des-γ-carboxyprothrombin (DCP) to detect liv...
Railway derailments present a safety hazard, carrying the potential for severe consequences for both human lives and the economy. Implementing derailment containment provisions (DCPs) near the track centerline is essential for mitigating risks in ope...
3D concrete printing (3DCP) technology holds significant potential to revolutionise traditional concrete production methods, offering designers and architects greater flexibility in creating intricate and innovative structures. Beyond structural appl...
This paper describes a study of the treatment of 2,4-dichlorophenol (2,4-DCP) with an ethylenediamine-N,N′-disuccinic-acid (EDDS)-modified photo-Fenton system in ultrapure water and different natural waters. The results showed that the EDDS-mod...
The mRNA 5′ cap consists of N7-methylguanosine bound by a 5′,5′-triphosphate bridge to the first nucleotide of the transcript. The cap interacts with various specific proteins and participates in all key mRNA-related processes, whic...
Co-simulation techniques have evolved significantly over the last 10 years. System simulation and hardware-in-the-loop testing are used to develop innovative products in many industrial sectors. Despite the success of these simulation techniques, the...
Rapid construction with an energy-efficient approach is a major challenge in the present construction industry. Cement, a carbon-intensive material, is mainly used in the construction industry and hence increases the sector’s carbon footprint o...
Partial discharge (PD) detection can be considered one of the most useful tools for assessing the insulation conditions of the power apparatus in high-voltage systems. Under AC conditions, this analysis is widely employed in online and offline tests,...
Three-dimensional concrete printing (3DCP) is advancing rapidly, yet its sustainable adoption requires alignment with circular-economy principles. This study evaluates the substitution of natural aggregates with recycled constituents, 3DCP waste, bri...
We have synthesized two novel fluorescent 3-(4-diethylaminocinnamoyl) coumarins that exhibit fluorescence quenching upon exposure to a nerve agent simulant, diethylchlorophosphate (DCP), providing a basis for rapid and sensitive DCP chemosensing. Fur...
This study presents the results of adapting an existing mathematical model of concrete, originally based on the isotropic properties of traditional cast concrete, to the conditions of 3D printing technology using layer-by-layer horizontal extrusion....
In this study, the channel potential of inhibited strings in 3D NAND flash memory using a bandgap-engineered tunneling oxide (BE-TOX) structure is analyzed. The equivalent oxide thickness (EOT) of the structure using BE-TOX was designed to be the sam...
Circularly polarized synthetic aperture radar (CP-SAR) is known to be insensitive to polarization mismatch losses caused by the Faraday rotation effect and antenna misalignment. Additionally, the dual-circular polarimetric (DCP) mode has proven to ha...
The properties of normal cementitious mixtures currently employed to the construction projects cannot be used to the three-dimensional concrete printing technology. This study experimentally investigated the compressive and flexural strength developm...
In this paper, we propose a single image dehazing method aiming at addressing the inherent limitations of the extensively employed dark channel prior (DCP). More concretely, we introduce the Gaussian mixture model (GMM) to segment the input hazy imag...
Background/Objectives: Immune checkpoint inhibitor (ICI)-based combinations are the standard first-line therapy for unresectable hepatocellular carcinoma (HCC). A major challenge is the early identification of patients with primary progression (1st-P...
2,4-Dichlorophenol (2,4-DCP) is a ubiquitous environmental pollutant categorized as a priority pollutant by the United States (US) Environmental Protection Agency, posing adverse health effects on humans and wildlife. Bioremediation is proposed as an...
Facioscapulohumeral muscular dystrophy (FSHD) is a slowly progressive muscular dystrophy with a wide range of manifestations including retinal vasculopathy. This study aimed to analyse retinal vascular involvement in FSHD patients using fundus photog...
Serum Glypican-3 (GPC3) levels in HCC patients are significantly higher than those in healthy individuals or patients with non-malignant liver diseases, making it a diagnostic marker for HCC. However, its diagnostic capability remains controversial d...
As the market for polyethylene consumption continues to expand, the amount of waste polyethylene is also increasing. Modifying asphalt with waste polyethylene (PE) is economical and environmentally friendly. The low-temperature performance and storag...
Three-dimensional (3D) concrete printing (3DCP) has gained significant attention over the last decade due to its many claimed benefits. The absence of effective real-time quality control mechanisms, however, can lead to inconsistencies in extrusion,...
1,2,3-trichloropropane (TCP) being one of the important environmental pollutants, has drawn significant concern due to its highly toxic and carcinogenic effects. In this study, we built a one-pot reaction system in which immobilized haloalkane dehalo...
3D concrete printing (3DCP) requires precise adjustments to parameters to ensure accurate and high-quality prints. However, despite technological advancements, manual intervention still plays a prominent role in this process, leading to errors and in...
A series of shape memory blends of natural Eucommia ulmoides gum (EUG) and low-density polyethylene (LDPE) with a bicontinuous cross-linked structure were prepared by a physical blending method, which could be used in the field of thermal response wi...
Zinc nitrate (ZnON) and zinc acetate (ZnOA) were used as precursors for the synthesis of zinc oxide (ZnO) nanoparticles by the sol–gel method. The ZnO powder was characterized by scanning electron microscopy (SEM), transmission electron microsc...
The study investigates the potential of using Vietnam fly ash (FA) as a substitute for traditional Portland cement to reduce both the volume of landfilled waste and the carbon footprint of concrete mixtures, while maintaining adequate mechanical perf...
Remove-and-replace with suitable material has been the primary solution used for improving subgrades in Michigan, USA, when weak subgrades are encountered in road construction. Considering the large extent of silty and clayey soils found in southeast...
The construction world has changed day by day and is becoming more digitalized by introducing new technologies. Three-dimensional concrete printing (3DCP) is one such technology that has automated building process along with several benefits such as...
This paper is primarily concerned with determining and assessing the properties of a cement-based composite material containing large particles of aggregate in digital manufacturing. The motivation is that mixtures with larger aggregate sizes offer b...
3D concrete printing technology (3DCP) is a relatively new technology that was first established in the 1990s. The main weakness of the technology is the interface strength between the extruded layers, which are deposited at different time intervals....
The use of recycled materials and locally sourced alternative binders in 3D concrete printing (3DCP) has significant potential to reduce carbon emissions in concrete construction. This study examines the effect of sugarcane bagasse ash (SCBA), a bypr...
Dinucleotide analogs of the messenger RNA cap (m7GpppN) are useful research tools and have potential applications as translational inhibitors or reagents for modification of in vitro transcribed mRNAs. It has been previously reported that replacing t...
Despite vaccination programs and direct antiviral treatments, the incidence of virus-related hepatocellular carcinoma (HCC) remains high, while ultrasound-based detection rates for early-stage HCC is continuously low. To address this insufficiency, w...
of 12