Search Results (812)

This paper presents a novel continuous-wave Doppler RADAR system for real-time speed measurement of moving objects, implemented using software-defined radio (SDR). Unlike traditional high-cost solutions typically found in research centers or specialized laboratories, this prototype offers a low-cost, compact, and easily deployable platform that lowers the entry barrier for experimentation and research. Operating within the 70 MHz–6 GHz range, SDR enables highly flexible signal processing; in this implementation, a 5.5 GHz carrier is selected to improve the detection precision by exploiting its reduced bandwidth for more accurate observation of frequency shifts. The carrier is modulated with a 2 kHz signal, and Doppler frequency deviations induced by object motion are processed to calculate velocity. Using a Welch spectral estimator, the system effectively reduces noise and extracts the Doppler frequency with high reliability. The prototype achieves speed measurements up to 196.36 km/h with approximately 2% error in the 0–100 km/h range, confirming its suitability for road traffic monitoring. A key innovation of this work is its single-antenna cross-polarized configuration, which simplifies hardware requirements while maintaining measurement accuracy. Furthermore, the system’s portability and open-access design make it ideal for in-vehicle applications, enabling direct deployment for automotive testing, driver-assistance research, and educational demonstrations. All design files and implementation details are openly shared, eliminating patent restrictions and encouraging adoption in low-resource academic and research environments. Full article

Silicon–germanium (Si-Ge) avalanche photodiodes (APDs), fully compatible with complementary metal–oxide–semiconductor (CMOS) processes, are critical devices for high-speed optical communication. In this work, we propose a three-terminal Si-Ge APD on a silicon-on-insulator (SOI) substrate based on device simulation studies. The proposed APD employs a separate absorption and multiplication structure, achieving an ultra-low breakdown voltage of 6.8 V. The device operates in the O-band, with optical signals laterally coupled into the Ge absorption layer via a silicon nitride (Si₃N₄) waveguide. At a bias of 2 V, the APD exhibits a responsivity of 0.85 A/W; under a bias of 6.6 V, it achieves a 3-dB optoelectronic (OE) bandwidth of 51 GHz, a direct current gain of 27, and a maximum gain–bandwidth product (GBP) of 1377 GHz. High-speed performance is further confirmed through eye-diagram simulations at 100 Gbps non-return-to-zero (NRZ) and 200 Gbps four-level pulse amplitude modulation (PAM4). These results clearly show the strong potential of the proposed APD for optical communication and interconnect applications under stringent power and supply voltage constraints. Full article

High-gain linear polarized antennas are widely used in wireless communications. However, the insertion loss of the feed network increases, limiting the potential for enhancing antenna gain. In this paper, a high-gain linear polarized Fabry–Perot (FP) antenna based on a fractal structure, which consisted of a metasurface and 2 × 2 array antenna structure, was designed. The spacing between the metasurface structure and array antenna was a free space half-wavelength, forming an FP antenna with a high gain. The self-similarity of the fractal structure allowed miniaturization of the structure. The proposed antenna and metasurface structural units comprised a first-order Minkowski fractal structure. The antenna unit was further miniaturized by including a square gap structure in its unit structure, while its gain was improved by using an air dielectric layer as the dielectric substrate of the antenna unit. The antenna unit formed a 2 × 2 array antenna through a 1–4 feeding network. The reliability of the array antenna performance was verified by processing and measuring the antenna structure. Experimental results showed that the −10 dB working bandwidth of the antenna is 5.71–5.89 GHz, while at 5.8 GHz its gain is 16.5 dBi. The radiation efficiency is over 90%. The experimental results were consistent with the simulation results. The proposed antenna exhibits high gain and is suitable for short-distance wireless communication systems and other fields. Full article

This paper introduces a method for estimating the Downlink Angle of Departure (DL-AoD) of 5G User Equipment (UE) from measured signal strengths of directionally transmitted synchronization signals. Based on estimated DL-AoD values, from two or more anchor nodes, the position of the UE was estimated. Unlike most prior work, which is simulation-based or relies on custom testbeds, this study uses real measurements from an operational 5G network in an industrial factory environment. A deterministic estimator was derived, but multipath and unknown beam characteristics limit its accuracy. To address this, machine learning was applied to automatically adapt to the environment. Previous simulation studies reported 90th-percentile DL-AoD estimation errors below 2°, while experimental works achieved best-case accuracies of 5–6°. In this study, the experimental DL-AoD estimation error remained below 4° for 90% of the measurements, indicating improved real-world performance. Reported positioning errors in the literature range from 3.8 m to 140 m, whereas the 13.2 m error obtained here lies near the midpoint of this range, confirming the practicality of the proposed method in industrial environments. Compared to existing approaches, this work demonstrates high angular accuracy using only sub-6 GHz beams in a realistic industrial scenario without detailed knowledge of antenna beam patterns and channel state. The findings demonstrate that standard 5G signals can provide accurate indoor localization without additional infrastructure, offering a practical path toward cost-effective positioning in industrial IoT and automation. Full article

A high-resolution temperature sensor using the beat frequency measurement between the modes of two DFB fiber lasers is presented. The laser cavities are formed by the femtosecond inscription technique in a highly Er/Yb co-doped phosphosilicate fiber with low optical losses and compact design. The experimental results show a sensitivity of 1 GHz/°C, leading to a temperature resolution of 0.02 °C restricted by the thermistor used in the experiment. The maximum possible resolution determined by the laser linewidth is estimated as 2 × 10⁻⁶ °C. The operation of such a sensor at high temperatures (≈750 °C) with the possibility of further temperature increase is demonstrated. The combination of high resolution and broad temperature range makes the sensor attractive for various applications, especially in high-temperature monitoring. Full article

This article presents an innovative chaotic communication scheme that integrates the multiuser access technique known as Wideband Code Division Multiple Access (W-CDMA) with the chaos-based selective strategy Chaos-Based Selective Symbol (CSS) and the unconventional modulation Chaos Parameter Shift Keying (CPSK). The system is designed to operate in the 2.45 GHz band and provides a robust and efficient alternative to conventional schemes such as Quadrature Amplitude Modulation (QAM). The proposed CPSK modulation enables the encoding of information for multiple users by regulating the 36 parameters of a Reconfigurable Chaotic Oscillator (RCO), theoretically allowing the simultaneous transmission of up to $2^{24}$ independent users over the same channel. The CSS technique encodes each user’s information using a unique chaotic segment configuration generated by the RCO; this serves as a reference for binary symbol encoding. W-CDMA further supports the concurrent transmission of data from multiple users through orthogonal sequences, minimizing inter-user interference. The system was digitally implemented on the Artix-7 AC701 FPGA (XC7A200TFBG676-2) to evaluate logic-resource requirements, while RF validation was carried out using a ZedBoard FPGA equipped with an AD9361 transceiver. Experimental results demonstrate optimal performance in the 2.45 GHz band, confirming the effectiveness of the chaos-based W-CDMA approach as a multiuser access technique for high-spectral-density environments and its potential for use in 5G applications. Full article

A compact fork-shaped four-element multiple-input multiple-output (MIMO) antenna system with wide bandwidth for 5G millimeter-wave (mmWave) applications is presented. The antenna elements are arranged orthogonally to achieve a compact footprint of $20\times 26{\mathrm{mm}}^2$. To enhance the gain, a frequency selective surface (FSS) is placed above the MIMO system, providing an average gain improvement of 1.5 dB across the entire operating band and achieving a peak gain of 7.5 dB at 41 GHz. The proposed design operates in the Ka-band (22–46 GHz), making it well suited for 5G communications. The antenna exhibits an isolation greater than 20 dB and radiation efficiency exceeding 80% across the band. Moreover, key MIMO performance metrics, including diversity gain (DG ≈ 10) and envelope correlation coefficient (ECC < 0.05), meet the required standards. A prototype of the proposed system was fabricated and measured, with the experimental results showing good agreement with simulations. Full article

In future 6G systems, integrated sensing and communication (ISAC) in the terahertz (THz) band are emerging as a key technology. Photomixing-based approaches offer advantages for the generation and control of THz waves due to their wide bandwidth and frequency tunability. This paper proposes and experimentally demonstrates a THz-band ISAC system that employs high-speed wavelength tunable lasers. Leveraging the rapid wavelength tunability of the laser, the system simultaneously generates a frequency-modulated continuous-wave (FMCW) radar signal and a frequency-shift keying (FSK) communication signal. Experimental results show successful ranging with a centimeter-level distance measurement error using a 7.9 GHz sweep-bandwidth THz-FMCW signal. The system achieves a short repetition period of 800 ns, significantly enhancing real-time performance in dynamic environments. Moreover, 2FSK communication at 2 Gbit/s was demonstrated without the use of an external modulator, achieving a BER below the HD-FEC threshold. These results confirm that radar and communication functionalities can be integrated into a single transmitter. The proposed system contributes to reducing system complexity and cost and offers a promising solution for 6G applications. Full article

This paper presents an intelligent design framework for a high-performance 26 GHz MIMO antenna array tailored to 5G applications, built upon a compact single-element patch. The 11.5 mm × 11.5 mm × 1.6 mm microstrip patch on FR4 exhibits near-unity electrical length, an ultra-deep return loss (S11 < −40 dB at 26 GHz), and a wide operational bandwidth from 24.4 to 31.2 GHz (6.8 GHz, ~26.2%). A two-element array, spaced at λ/2, is first augmented with a inspired metamaterial (MTM) unit cell whose dimensions are optimized via a Multi-Layer Perceptron (MLP) model to maximize gain (+2 dB) while preserving S11. In the second phase, a closed-square parasitic ring is introduced between the elements; its side length, thickness, and position are predicted by a Random Forest (RF) model with Bayesian optimization to minimize mutual coupling (S12) from −25 dB to −58 dB at 26 GHz without significantly degrading S11 (remains below −25 dB). Full-wave simulations and anechoic chamber measurements confirm the ML predictions. The close agreement among predicted, simulated, and measured S-parameters validates the efficacy of the proposed AI-assisted optimization methodology, offering a rapid and reliable route to next-generation millimeter-wave MIMO antenna systems. Full article

This paper presents a W-band low-voltage traveling-wave tube (TWT) incorporating a spoof surface plasmon polariton (SSPP) slow-wave structure (SWS) and a dual-sheet beam. The SSPP-based SWS adopts a periodic double-F-groove configuration, which provides strong field localization, increases the interaction impedance, and reduces the phase velocity, thereby enabling a low synchronization voltage. Owing to its symmetric open geometry, the SWS naturally forms a dual-sheet beam tunnel, which enhances the effective beam current without increasing the aperture size. Eigenmode calculations indicate that, within the 92–97 GHz band, the normalized phase velocity is between 0.198 and 0.208, and the interaction impedance exceeds 2.65 Ω. Moreover, an energy-coupling structure was developed to ensure efficient signal transmission. Three-dimensional particle-in-cell (PIC) simulations predict a peak output power of 366.1 W and an electronic efficiency of 6.15% at 95.5 GHz for a 2 × 250 mA dual-sheet beam at 11.9 kV, with stable amplification and without self-oscillation observed. The proposed low-voltage, high-efficiency W-band TWT offers a manufacturable and easily integrable solution for next-generation millimeter-wave systems, supporting high-capacity wireless backhaul, airborne communication, radar imaging, and sensing platforms where compactness and reduced power-supply demands are critical. Full article

This study simulates an open-cavity random distributed Raman amplifier for optimal performance across a 5 THz S-band spectrum (196.2–201.1 THz; 1490.76–1527.99 nm), evaluating its capacity via a 50-channel WDM grid with 100 GHz spacing. The primary Raman pump wavelength was tuned from 1318 to 1344 nm to identify the optimal point. A Fiber Bragg Grating (FBG), placed at the end of a 60 km single-mode fiber and upshifted 88 nm from the pump, enhances efficiency by transferring energy to the amplified signal, minimizing power variation. Results yield < 2 dB gain ripple across channels using raw Raman amplification without flattening filters with minor degradation from residual channels, confirming the DRA design’s viability for high-density S-band optical communication expansion. Full article

This paper presents the design and implementation of a wideband diode-based down-converter operating from 60 to 90 GHz with a variable flat conversion gain. The proposed down-converter is implemented utilizing the Miniature Hybrid-Microwave Integrated Circuit (MHMIC) technology. It is composed of a wideband double-balanced mixer, a Local Oscillator (LO) chain, and a differential TransImpedance Amplifier (TIA) with a variable gain. The designed mixer uses a novel topology exhibiting minimum reflection and high isolation between the RF and LO ports across a wide operating frequency of 30 GHz. In this topology, two balanced detectors generate the differential IF signal with minimum reflection. The characteristic impedance ($Z_0$) of the mixer is set to be $70.7$$\Omega$, to minimize trace widths to reduce the mutual coupling and increasing the bandwidth. The OPA 657 is the core of the designed differential TIA with a variable gain. In addition, the LO chain of the down-converter utilized a combination of an active (×2) and a passive (×3) multiplier to generate enough RF power in the desired frequency range. Also, a WR-12 waveguide to Substrate Integrated Waveguide (SIW) transition is designed for the RF and LO ports that operates through the E-band. The proposed down-converter demonstrates excellent performance, with a high isolation between RF and LO ports exceeding 22 dB and a maximum conversion gain of $-5$ dB, and a response with a variation of ±5 dB across the band. The proposed mixer exhibits a return loss of better than 10 dB at both RF and LO ports, and it consumes a power of 560 mW. Full article

This paper discusses the design, manufacturing, and experimental characterization of a Ka-band fully dielectric reflectarray realized using Zetamix $\epsilon$ 7.5 ceramic material and additive manufacturing. Properly tuning the infill during the manufacturing process, it is possible to control the permittivity of the material, which can therefore be considered, to all intents and purposes, an additional degree of freedom for optimizing the unit cell and consequently the reflectarray performance. The optimal values of ${\epsilon }_r$ are determined through numerical analysis of the unit cell and experimental characterization of bricks manufactured with different printing parameters. Then, the unit cell is used to design a medium-sized reflectarray with an aperture of 207.4${\lambda }_0^2$ and a thickness of 0.44${\lambda }_0$, at the design frequency $f_0=30$ GHz. The full-wave simulations of the designed RA and experimental measurements of a prototype confirm the excellent performance of the antenna, which exhibits a broadband flat response from 28 to 31 GHz and an aperture efficiency exceeding 50%. Full article

This paper proposes wideband circularly polarized (CP) 1-D connected array antennas with slant slot feeders and gradient artificial dielectric layers (ADLs). The slant slot feeder introduces an identical electric field (E-field) along the x- and y-directions. Three slabs consisting of multiple ADLs are stacked above the slot feeder. Due to the different boundary conditions of a 1-D connected array in the $zx$- and $zy$-planes, the guided wave in the slabs exhibits different multipath lengths along the x- and y-directions, leading to a 90° phase difference between the $E_x$ and $E_y$ components. Moreover, the cascaded slabs are designed with gradient effective permittivities for a gradual impedance transition from the guided mode to the radiating mode, allowing for wideband matching and CP performance. To validate the proposed design approach, an 8 × 1 array was fabricated and measured. The antenna shows a 1.96:1 (10.1–20 GHz) impedance bandwidth (VSWR < 2) and a 1.46:1 (12–17.5 GHz) 3 dB axial ratio bandwidth in measurement. The array exhibits an average right-hand CP boresight gain of 12.39 dBic. Moreover, we produced a frequency-invariant beam pattern with an average half-power beamwidth (HPBW) of 24.77° and a standard deviation below 3.63° over 12–18 GHz for the target pattern, with a HPBW of 26°, demonstrating wideband electronic warfare performance using the proposed array. Full article

A low-profile beam-scanning antenna array for cost-effective 5G millimeter-wave (mmWave) applications is proposed in this work. The array features a compact single-layer substrate structure while achieving a wide operating bandwidth covering the 5G n257 band (26.5–29.5 GHz). A novel antenna element is first designed and analyzed, employing a metallic rectangular patch with shorting pins as the radiator, excited through a modified coplanar waveguide (CPW) feeding structure. Based on this element, four-element and eight-element linear arrays are developed with an overall profile of only 0.07 λ at 28 GHz and fabricated to experimentally assess beam-scanning performance. To accurately characterize and validate the radiation behavior, an mmWave beam box system is utilized for pattern measurements. The results demonstrate that the fabricated arrays achieve an impedance bandwidth fully covering the 5G n257 band with VSWR < 2, while the measured beam-scanning performance closely agrees with simulations. These findings confirm that the proposed design and its extensions offer strong potential for practical integration into future 5G mmWave communication devices. Full article