Search Results (154)

Hybrid materials based on porous organic polymers (POPs) and metal–organic frameworks (MOFs) are increasing attention for advanced separation processes due to the possibility to combine their properties. POPs provide high surface areas, chemical stability, and tunable porosity, while MOFs contribute a high variety of defined crystalline structures and enhanced separation characteristics. The combination (or hybridization) with PIMs gives rise to mixed-matrix membranes (MMMs) with improved permeability, selectivity, and long-term stability. However, interfacial compatibility remains a key limitation, often addressed through polymer functionalization or controlled dispersion of the MOF phase. MOF/COF hybrids are more used as biochemical sensors with elevated sensitivity, catalytic applications, and wastewater remediation. They are also very well known in the gas sorption and separation field, due to their tunable porosity and high electrical conductivity, which also makes them feasible for energy storage applications. Last but not less important, hybrids with other POPs, such as hyper-crosslinked polymers (HCPs), covalent triazine frameworks (CTFs), or conjugated microporous polymers (CMPs), offer enhanced functionality. MOF/HCP hybrids combine ease of synthesis and chemical robustness with tunable porosity. MOF/CTF hybrids provide superior thermal and chemical stability under harsh conditions, while MOF/CMP hybrids introduce π-conjugation for enhanced conductivity and photocatalytic activity. These and other findings confirm the potential of MOF-POP hybrids as next-generation materials for gas separation and carbon capture applications. Full article

The strategic design of donor–acceptor (D-A) conjugated porous polymers has emerged as a pivotal methodology for advancing efficient photocatalytic hydrogen evolution. However, conventional D-A polymeric architectures face inherent limitations: excessively strong acceptor units may lower the LUMO energy level, compromising proton (H⁺) reduction capability, while weak D-A interactions result in inadequate light-harvesting capacity and insufficient photogenerated electrons, ultimately diminishing photocatalytic activity. To address these challenges, we developed a new D1-A-D2 conjugated porous polymer (CPP) system. The strategic incorporation of a secondary donor benzothiophene (DBBTh) unit enabled precise bandgap engineering in D₁-A-D₂ CPPs. Experimental results demonstrate that DBBTh integration significantly enhances both light absorption efficiency and proton reduction ability. Under visible-light irradiation (λ > 420 nm), the Py-BKh1 photocatalyst achieved a hydrogen evolution rate (HER) of 10.2 mmol h⁻¹ g⁻¹ with an apparent quantum yield (AQY) of 9.5% at 500 nm. This work provides a groundbreaking paradigm for designing high-performance organic photocatalysts. Full article

Water pollution is a critical environmental issue in modern society, and adsorption is recognized as a straightforward and efficient water purification technique. In this study, three new viologen-based ionic porous organic polymers were designed and successfully synthesized via a simple approach, and their adsorption properties for water pollutants were evaluated. The cationic nature of these polymers, coupled with their large conjugated π-electron system, physicochemical stability, and aromatic backbone, contributes to their high adsorption capacity and rapid adsorption efficiency for anionic contaminants in water such as Methyl Orange, Congo Red, and Cr (VI). The polymers exhibited maximum adsorption capacities of 1617 mg/g for MO, 3734 mg/g for CR, and 530.22 mg/g for Cr (VI), surpassing most previously reported adsorbents. Furthermore, the polymers maintained a high removal rate even in the presence of competing anions. Effective separation of anionic dyes from mixed solutions could be achieved through simple filtration. These characteristics make them promising candidates for water purification applications. Full article

As a key means to solve energy and environmental problems, photocatalytic technology has made remarkable progress in recent years. Organic semiconductor materials offer structural diversity and tunable energy levels and thus attracted great attention. Among them, porphyrin and its derivatives show great potential in photocatalytic reactions and light therapy due to their unique large-π conjugation structure, high apparent quantum efficiency, tailorable functionality, and excellent biocompatibility. Compared to unassembled porphyrin molecules, supramolecular porphyrin assemblies facilitate the solar light absorption and improve the charge transfer and thus exhibit enhanced photocatalytic performance. Herein, the research progress of porphyrin-based supramolecular assemblies, including the construction, the regulation of charge separation and transfer, stability, and application in photocatalysis, was systematically reviewed. The construction strategy of porphyrin supramolecules, the mechanism of charge separation, and the intrinsic relationship of assembling structure-charge transfer-photocatalytic performance received special attention. Surfactants, peptide molecules, polymers, and metal ions were introduced to improve the stability of the porphyrin assemblies. Donor-acceptor structure and co-catalysts were incorporated to inhibit the recombination of the photoinduced charges. These increase the understanding of the porphyrin supramolecules and provide ideas for the design of high-performance porphyrin-based photocatalysts. Full article

π-conjugated polymers are arguably one of the most exciting classes of materials and have attracted substantial attention due to their unique optical and electronic properties. The introduction of transition metals into conjugated polymers tunes the optoelectronic properties of these metallopolymers, which may improve their performance in device applications. Graphene and reduced graphene oxide (RGO) derivatives are interesting materials with a unique structure and outstanding properties. The present work reports an investigation of three hybrid RGO and π-conjugated oligomers that contain ruthenium polypyridyl chromophores serving as models to provide molecular-level insight for the corresponding transition-metal-containing conjugated polymers. Full article

Designing novel π-conjugated conductive polymers with abundant redox-active groups is a viable route to achieve high charge storage performance for aqueous energy storage devices. Electropolymerization is a powerful tool to construct conductive polymers. Here, s-triazine is, for the first time, electropolymerized in an aqueous acidic solution on carbon cloth. The polytriazine-coated carbon cloth electrode (PT/CC) exhibits a granular structure, with abundant pores. The charge storage performance is investigated, and a specific capacity of 101.4 mAh ${\mathrm{g}}^{-1}$ at 1 A ${\mathrm{g}}^{-1}$ in 1 M ${\mathrm{H}}_2{\mathrm{S}\mathrm{O}}_4$ is achieved. Additionally, in 1 M ZnSO₄, a specific capacity of 50.3 mAh ${\mathrm{g}}^{-1}$ at 1 A ${\mathrm{g}}^{-1}$ can be achieved by the PT/CC. The PT/CC behaves as a battery-type charge storage electrode, and the amino/imino and carbonyl/hydroxyl groups contribute to the charge storage, with cation insertion and extraction. A symmetric aqueous charge storage device assembled with two PT/CC electrodes exhibits an energy density of 12.92 Wh ${\mathrm{k}\mathrm{g}}^{-1}$ and a power density of 250 W ${\mathrm{k}\mathrm{g}}^{-1}$ at 1 A ${\mathrm{g}}^{-1}$. After 2500 cycles at 10 A ${\mathrm{g}}^{-1}$, the device retains a specific capacity of 83.3%. This study indicates that the PT is a potential candidate material for an aqueous energy storage device. Full article

The electrochromic phenomenon of conducting polymer is mainly dominated by the π-π* band transition. The π conjugation is influenced by the coplanarity between polymer units, deviations from which can lead to an increased ionization potential and band gap values. In order to investigate the effect of plane distortion angle on electrochromic color in the main chain structure of polymerization, high-performance poly(3,3′-dimethyl-2,2′-bithiophene) (PDMeBTh) with a large plane distortion angle is successfully synthesized in boron trifluoride diethyl etherate (BFEE) by the electrochemical anodic oxidation method. The electrochemical and thermal properties of PDMeBTh prepared from BFEE and ACN/TBATFB are compared. The electrochromic properties of PDMeBTh are systematically investigated. The PDMeBTh shows a different color change (orange-yellow in the neutral state) compared to poly (3-methylthiophene) (light-red in the neutral state) due to the large torsion angle between thiophene rings of the main polymer chain. The optical contrast, response time, and coloring efficiency (CE) of the prepared PDMeBTh are also studied, which shows good electrochromic properties. For practical applications, an electrochromic device is fabricated by the PDMeBTh and PEDOT. The color of the device can be reversibly changed between orange-yellow and dark blue. The light contrast of the device is 27% at 433 nm and 61% at 634 nm. The CE value of the device is 403 cm² C⁻¹ at 433 nm and 577 cm² C⁻¹ at 634 nm. The constructed device also has good open circuit memory and electrochromic stability, showing good potential for practical applications. Full article

Thin films of poly(arylene ethynylene)-conjugated polymers, including low-energy-gap donor–acceptor polymers, can be prepared via stepwise polymerization utilizing surface-confined Sonogashira cross-coupling. This robust and efficient polymerization protocol yields conjugated polymers with a precise molecular structure and with nanometer-level control of the organization and the uniform alignment of the macromolecular chains in the densely packed film. In addition to high stability and predictable and well-defined molecular organization and morphology, the surface-confined conjugated polymer chains experience significant interchain electronic interactions, resulting in dominating intermolecular π-electron delocalization which is primarily responsible for the electronic and spectroscopic properties of polymer films. The fluorescent films demonstrate remarkable performance in chemosensing applications, showing a turn-off fluorescent response on the sub-ppt (part per trillion) level of nitroaromatic explosives in water. This unique sensitivity is likely related to the enhanced exciton mobility in the uniformly aligned and structurally monodisperse polymer films. Full article

A novel approach towards synthesizing new metalloid-substituted olefins has been accomplished by transforming (E)-1,2-diboryl-1-silylethenes through two consecutive Suzuki–Miyaura coupling reactions. This methodology provides an effective and selective way to obtain new, structurally different products, such as (E)-1-silyl-1-boryl-2-arylethens, (1E,3E)-1-silyl-1-boryl-2-alkenylethens, and (E)-1-silyl-1-aryl₁-2-aryl₂ethenes, which are difficult to synthesize through hydrometallation reactions and related processes. Due to the presence of reactive motifs (silyl group, Bpin moiety, and C_sp2-H bond) in the structure of the final products, these molecules might be considered powerful building blocks in modern chemistry. With the aid of demetallation and cross-coupling reactions, they might be further functionalized into several invaluable chemicals, i.e., tetrasubstituted olefins (anti-cancer drugs, fluorescence materials), compounds with high π-conjugation, and polymers. Full article

In recent years, π-conjugated liquid crystalline molecules with optoelectronic functionalities have garnered considerable attention, and integrating these molecules into side-chain liquid crystalline polymers (SCLCPs) holds potential for developing devices that are operational near room temperature. However, it is difficult to design SCLCPs with excellent processability because liquid crystalline mesogens are rigid rods, have low solubility in organic solvents, and have a high isotropization temperature. Recently, we developed near-room-temperature π-conjugated nematic liquid crystals based on “bridged stilbene”. In this work, we synthesized a polyacrylate SCLCP incorporating a bridged stilbene that exhibited a nematic phase near room temperature and could maintain liquid crystallinity for more than three months. We conducted a thorough phase structure analysis and evaluated the optical properties. The birefringence values of the resulting polymers were higher than those of the corresponding monomers because of the enhanced order parameters due to the polymer effect. In addition, the synthesized polymers inherited mesogen-derived AIE properties, with high quantum yields (Φ_fl = 0.14–0.35) in the solid state. It is noteworthy that the maximum fluorescence wavelength exhibited a redshift of greater than 27 nm as a consequence of film formation. Thus, several unique characteristics of the SCLCPs are unattainable with small molecular systems. Full article

Conductive polymer composites (CPCs) with nanocarbon fillers are at the high end of modern materials science, advancing current electronic applications. Herein, we establish the interplay between the chemistry and electrophysical properties of reduced graphene oxide (rGO), separately and as a filler for CPCs with the segregated structure conferred by the chemical composition of the initial graphene oxide (GO). A set of experimental methods, namely X-ray photoelectron spectroscopy (XPS), ultraviolet-visible spectroscopy, van der Paw and temperature-dependent sheet resistance measurements, along with dielectric spectroscopy, are employed to thoroughly examine the derived materials. The alterations in the composition of oxygen groups along with their beneficial effect on nitrogen doping upon GO reduction by hydrazine are tracked with the help of XPS. The slight defectiveness of the graphene network is found to boost the conductivity of the material due to facilitating the impact of the nitrogen lone-pair electrons in charge transport. In turn, a sharp drop in material conductivity is indicated upon further disruption of the π-conjugated network, predominantly governing the charge transport. Particularly, the transition from the Mott variable hopping transport mechanism to the Efros–Shklovsky one is signified. Finally, the impact of rGO chemistry and physics on the electrophysical properties of CPCs with the segregated structure is evaluated. Taken together, our results give a hint at how GO chemistry manifests the properties of rGO and the CPC derived from it, offering compelling opportunities for their practical applications. Full article

Polymers containing π-conjugated segments are a diverse group of large molecules with semiconducting and emissive properties, with strong potential for use as active layers in Organic Light-Emitting Diodes (OLEDs). Stable blue-emitting materials, which are utilized as emissive layers in solution-processed OLED devices, are essential for their commercialization. Achieving balanced charge injection is challenging due to the wide bandgap between the HOMO and LUMO energy levels. This study examines the optical and photophysical characteristics of blue-emitting polymers to contribute to the understanding of the fundamental mechanisms of color purity and its stability during the operation of OLED devices. The investigated materials are a novel synthesized lab scale polymer, namely poly[(2,7-di(p-acetoxystyryl)-9-(2-ethylhexyl)-9H-carbazole-4,4′-diphenylsulfone)-co-poly(2,6-diphenylpyrydine-4,4′-diphenylsulfone] (CzCop), as well as three commercially supplied materials, namely Poly(9,9-di-n-octylfluorenyl-2,7-diyl) (PFO), poly[9,9-bis(2′-ethylhexyl) fluorene-2,7-diyl] (PBEHF), and poly (9,9-n-dihexyl-2,7-fluorene-alt-9-phenyl-3,6-carbazole) (F6PC). The materials were compared to evaluate their properties using Spectroscopic Ellipsometry, Photoluminescence, and Atomic Force Microscopy (AFM). Additionally, the electrical characteristics of the OLED devices were investigated, as well as the stability of the electroluminescence emission spectrum during the device’s operation. Finally, the determined optical properties, combined with their photo- and electro-emission characteristics, provided significant insights into the color stability and selectivity of each material. Full article

A viable tactic to effectively address the climate crisis is the production of renewable fuels via photocatalytic reactions using solar energy and available resources like carbon dioxide (CO₂) and water. Organic polymer material-based photocatalytic materials are thought to be one way to convert solar energy into valuable chemicals and other solar fuels. The use of porous organic polymers (POPs) for CO₂ fixation and capture and sequestration to produce beneficial compounds to reduce global warming is still receiving a lot of interest. Visible light-responsive organic photopolymers that are functionally designed and include a large number of heteroatoms and an extended π-conjugation allow for the generation of photogenerated charge carriers, improved absorption of visible light, increased charge separation, and decreased charge recombination during photocatalysis. Due to their rigid structure, high surface area, flexible pore size, permanent porosity, and adaptability of the backbone for the intended purpose, POPs have drawn more and more attention. These qualities have been shown to be highly advantageous for numerous sustainable applications. POPs may be broadly categorized as crystalline or amorphous according to how much long-range order they possess. In terms of performance, conducting POPs outperform inorganic semiconductors and typical organic dyes. They are light-harvesting materials with remarkable optical characteristics, photostability, cheap cost, and low cytotoxicity. Through cocatalyst loading and morphological tweaking, this review presents optimization options for POPs preparation techniques. We provide an analysis of the ways in which the preparative techniques will affect the materials’ physicochemical characteristics and, consequently, their catalytic activity. An inventory of experimental methods is provided for characterizing POPs’ optical, morphological, electrochemical, and catalytic characteristics. The focus of this review is to thoroughly investigate the photochemistry of these polymeric organic photocatalysts with an emphasis on understanding the processes of internal charge generation and transport within POPs. The review covers several types of amorphous POP materials, including those based on conjugated microporous polymers (CMPs), inherent microporosity polymers, hyper-crosslinked polymers, and porous aromatic frameworks. Additionally, common synthetic approaches for these materials are briefly discussed. Full article

In this study, fully aromatic polyether sulfones were developed, bearing blue, yellow, and orange–red π-conjugated semiconducting units. Carbazole-, anthracene-, and benzothiadiazole-based fluorophores are copolymerized with a diphenylsulfone moiety. A diphenylpyridine comonomer was additionally utilized, acting as both a solubilizing unit and a weak blue fluorescent group. Using this rationale, fluorescent polyarylethers with high molecular weights, up to 70 kDa, were developed, showing film formation ability and high thermal stability, while preserving excellent solubility in common organic, nonvolatile, and nonchlorinated solvents. Fine-tuning of the emission color was achieved through subtle changes of the comonomers’ type and ratio. Single-chromophore-bearing copolymers emitted in the blue or the yellow region of the visible spectrum, while the dual-chromophore-bearing terpolymers emitted throughout the visible spectrum, resulting in white light emission. Solutions of 20 wt% in polar aprotic solvents at ambient conditions allowed the deposition of fluorescent copolyethers and printing from non-chlorinated solvents. All polyethers were evaluated for their structural and optoelectronic properties, and selected copolymers were successfully used in the emitting layer (EML) of organic light-emitting diode (OLED) devices, using either rigid or flexible substrates. Remarkable color stability was displayed in all cases for up to 15 V of bias voltage. The Commission Internationale de L’Eclairage (CIE) of the fabricated devices is located in the blue (0.16, 0.16), yellow (0.44, 0.50), or white region of the visible spectrum (0.33, 0.38) with minimal changes according to the ratio of the comonomers. The versatile methodology toward semiconducting polyethersulfones for polymer light-emitting diodes (PLEDs) developed herein led to the scaled-up production of luminescent polymers of up to 25 g of high-molecular-weight single batches, demonstrating the effectiveness of this approach as a straightforward tool to facilitate the synthesis of flexible and printable EMLs for large-area PLED coverage. Full article

For their great structural versatility, thiophene-based π-conjugated systems have been widely exploited in the preparation of low band gap materials. Here, we report the synthesis of a highly conjugated tetrathiophene system, namely 1,4-di([2,2′-bithiophen]-3-yl)buta-1,3-diyne (1), that presents two bithiophene units connected at position 3 by a butadiynylene spacer. Single-crystal X-ray diffraction (SC-XRD) analysis elucidated the structure of 1, confirming the planarity of the molecule. The molecule was then electropolymerized onto the surface of a gold-coated piezoelectric quartz crystal, showing a high reactivity that is ascribable to the extended conjugation. The frontier molecular orbital energies of 1 were obtained via DFT optimization performed on the crystal structure-derived molecular geometry. Finally, DFT was also used to estimate the polymer band gap. Full article