Search Results (204)

The Jiapigou mining district (>180 t Au) is an important gold district in China. For a long time, the ore genesis of the gold deposits in the Jiapigou district has been a subject of controversy and differing opinions, which has severely hindered metallogenic theories and mineral exploration. Here we present a comprehensive investigation including geology, fluid inclusions (FIs), and H–O–S isotopic data for the Naizhigou deposit in the Jiapigou district to elucidate the sources of orefluids and metals, as well as the metallogenic mechanism. The results show the following: (1) The Naizhigou deposit is characterized by quartz vein-type ores and is hosted in the Middle Jurassic granitic pluton. Native gold and sulfides were mainly deposited in the second stage (quartz–polymetallic sulfides) compared with the first (quartz–pyrite–molybdenite) and third (quartz–calcite) stages. (2) The FI studies indicated that the orefluids evolved from the early–main-stage CO₂–H₂O–NaCl system to the late-stage H₂O–NaCl system and have homogenization temperatures of 289–363, 210–282, and 124–276 °C and salinities of 4.1–20.9, 5.8–16.4, and 6.1–12.7 wt% NaCl equivalent, respectively. Fluid boiling and fluid mixing collectively controlled the precipitation of gold and ore-forming elements. (3) The δD values of the FIs hosted in quartz from the three stags range from −81 to −75 ‰, from −99 to −86 ‰, and from −110 to −101 ‰, while δ¹⁸O_water values of these FIs range from 5.3 to 5.9 ‰, from 1.1 to 5.2 ‰, and from −2.1 to −0.7 ‰, respectively. Pyrite samples from the three stages in the Naizhigou deposit have δ³⁴S values of 2.1 to 2.5 ‰, 3.1 to 4.3 ‰, and 3.8 to 3.9 ‰, respectively. The stable isotopes indicate that the orefluids and metals mainly originated from magma. A comparative study of regional observations reveals that the Naizhigou deposit is a magmatic-related mesothermal gold deposit, rather than a metamorphism-related orogenic gold deposit. The estimated ore-forming depths are 4.0–20.7 km, with exhumation depths of 4.1–5.5 km, which indicated that the deposit has been well preserved. Regionally, the new exploration strategies should place greater emphasis on work concerning ore-related plutons, ore-controlling faults, and hydrothermal alteration. Full article

Urbanization, escalating agriculture, tourism, and industrial development in the Chiang Mai–Lamphun groundwater basin in northern Thailand have increased water demand, causing widespread groundwater extraction. Over the past few decades, there has been a rapid, unrecoverable steady drop in groundwater levels in several areas in Chiang Mai and Lamphun provinces. This study employed hydrogeological investigations, hydrometeorological data analyses, stable isotopic analysis (δ¹⁸O and δ²H), and groundwater flow modeling using a 3D groundwater flow model (MODFLOW) to quantify groundwater recharge and delineate important groundwater recharge zones within the basin. The results showed that floodplain deposits exhibited the highest recharge rate, 104.4 mm/y, due to their proximity to rivers and high infiltration capacity. In contrast, younger terrain deposits, covering the largest area of 1314 km², contributed the most to total recharge volume with an average recharge rate of 99.8 mm/y. Seven significant recharge zones within the basin, where annual recharge rates exceeded 105 mm/y (average recharge of the entire basin), were also delineated. Zone 4, covering parts of densely populated Muaeng Lamphun, Ban Thi, and Saraphi districts, had the largest area of 330 km² and a recharge rate of 130.2 mm/y. Zone 6, encompassing Wiang Nong Long, Bai Hong, and Pa Sang districts, exhibited the highest recharge rate of 134.6 mm/y but covered a smaller area of 67 km². Stable isotopic data verified that recent precipitation predominantly recharged shallow groundwater, with minimal evaporation or isotopic exchange. The basin-wide average recharge rate was 104 mm/y, reflecting the combined influence of geology, permeability, and spatial distribution. These findings provide critical insights for sustainable groundwater management in the region, particularly in the context of climate change and increasing water demand. Full article

With the intensification of human activities, the water resource environment in the karst mountainous area of central Shandong has undergone significant changes, directly manifested in the cessation of karst spring flows and the occurrence of karst collapses within the spring basin in the Laiwu Basin. To support the scientific development and management of karst water, this study utilizes comprehensive analysis and deuterium-oxygen isotope test data from surveys and sampling of 20 typical karst springs conducted between 2016 and 2018. By integrating mathematical statistics, correlation analysis, and ion component ratio methods, the study analyzes the genesis, hydrochemical ion component sources, and controlling factors of typical karst springs in the Laiwu Basin. The results indicate that the genesis of karst springs in the Laiwu Basin is controlled by three factors: faults, rock masses, and lithology, and can be classified into four types: water resistance controlled by lithology, by faults, by basement, and by rock mass. The karst springs are generally weakly alkaline freshwater, with the main ion components being HCO₃⁻ and Ca²⁺, accounting for approximately 55.02% and 71.52% of the anion and cation components, respectively; about 50% of the sampling points have a hydrochemical type of HCO₃·SO₄-Ca·Mg. Stable isotope (δ¹⁸O and δD) results show that atmospheric precipitation is the primary recharge source for karst springs in the Laiwu Basin. There are varying degrees of evaporative fractionation and water–rock interaction during the groundwater flow process, resulting in significantly higher deuterium excess (d-excess) in the sampling points on the southern side of the basin compared to the northern side, indicating clear differentiation. The hydrochemical composition of the karst groundwater system is predominantly governed by water–rock interactions during flow processes and anthropogenic influences. Carbonate dissolution (primarily calcite) serves as the principal source of HCO₃⁻, SO₄²⁻, Ca²⁺, and Mg²⁺, while evaporite dissolution and reverse cation exchange contribute to the slight enrichment of Ca²⁺ and Mg²⁺ alongside depletion of Na⁺ and K⁺ in spring waters. Saturation indices (SI) reveal that spring waters are saturated with respect to gypsum, aragonite, calcite, and dolomite, but undersaturated for halite. The mixing of urban domestic sewage, agricultural planting activities, and the use of manure also contributes to the formation of Cl⁻ and NO₃⁻ ions in karst springs. Full article

Water use strategies reflect the ability of plants to adapt to drought caused by climate change. However, how these strategies change with stand development and seasonal drought is not fully understood. This study used stable isotope techniques (δD, δ¹⁸O, and δ¹³C) combined with the MixSIAR model to quantify the seasonal changes in water use sources and water use efficiency (WUE) of Eucalyptus urophylla S.T.Blake × E. grandis (E. urophylla × E. grandis) at four stand ages (2-, 4-, 9- and 14-year-old) and to identify their influencing factors. Our results showed that the young (2-year-old) and middle-aged (4-year-old) stands primarily relied on shallow soil water throughout the growing season due to the limitations of a shallow root system. In contrast, the mature (9-year-old) and overmature (14-year-old) stands, influenced by the synergistic effects of larger and deeper root systems and relative extractable water (REW), exhibited more flexibility in water use, mainly relying on shallow soil water in wet months, but shifting to using middle and deep soil layer water in dry months, and quickly returning to mainly using shallow soil water in the episodic wet month of the dry season. The WUE of E. urophylla × E. grandis was affected by the combined effect of air temperature (T), vapor pressure deficit (VPD), and REW. WUE was consistent across the stand ages in the wet season but decreased significantly with stand age in the dry season. This suggests that mature and overmature stands depend more on shifting their water source, while young and middle-aged stands rely more on enhanced WUE to cope with seasonal drought stress, resulting in young and middle-aged stands being more vulnerable to drought stress. These findings offer valuable insights for managing water resources in eucalyptus plantations, particularly as drought frequency and intensity continue to rise. Full article

Fluoride-enriched geothermal groundwater poses chronic health risks (e.g., dental and skeletal fluorosis) through prolonged exposure; nevertheless, hydrochemical-driven factors and the genetic mechanism of fluoride enrichment in such systems remain inadequately identified. This study employed hydrochemical characterization, isotopic tracing, and health risk models to elucidate the genetic mechanism of fluoride-enriched geothermal groundwater. The key findings reveal the following. (1) Geothermal groundwater (Cl-Na type; TDS 90–345 mg/L; pH 6.25–7.42) contrasts with alkaline river water (pH 7.48–8.05; SO₄-Na/HCO₃-Na) and saline seawater (TDS 23.9–28.2 g/L). Stable isotopes (δD, δ¹⁸O) confirm atmospheric precipitation recharge with an elevation of 69–635 m. (2) The Self-Organizing Map algorithm categorized 30 geothermal samples into three groups: Cluster I—low temperature and pH, high TDS; Cluster II—high temperature, low F⁻ concentration; and Cluster III—low TDS, and high pH and F⁻ concentration. (3) Fluoride enrichment in Cluster III originated from the evaporite/fluorite dissolution under alkaline conditions and cation exchange interactions, while the inhibition of CaF₂ dissolution by reverse cation exchange limited the accumulation of F⁻ in Cluster II and Cluster III samples. (4) Health risks disproportionately affect children (80% high risk) and women, necessitating pre-use defluorination. Full article

The Huanggang iron-tin deposit, located in the southern Greater Khingan Range, is one of the largest Fe-Sn deposits in Northern China (NE China). Iron-tin mineralization occurs mainly in the contact zone between granitoid intrusions and the marble of the Huanggang and Dashizhai formations. Six mineralization stages are identified: (I) anhydrous skarn, (II) hydrous skarn, (III) cassiterite-quartz-calcite, (IV) pyrite-arsenopyrite-quartz-fluorite, (V) polymetallic sulfides-quartz, and (VI) carbonate ones. Fluid inclusions (FIs) analysis reveals that Stage I garnet and Stage II–III quartz host liquid-rich (VL-type), vapor-rich two-phase (LV-type), and halite-bearing three-phase (SL-type) inclusions. Stage IV quartz and fluorite, along with Stage V quartz, are dominated by VL- and LV-type inclusions, while Stage VI calcite contains exclusively VL-type inclusions. The FIs in Stages I to VI homogenized at 392–513, 317–429, 272–418, 224–347, 201–281, and 163–213 °C, with corresponding salinities of 3.05–56.44, 2.56–47.77, 2.89–45.85, 1.39–12.42, 0.87–10.62, and 4.48–8.54 wt% NaCl equiv., respectively. The H–O–C isotopes data imply that fluids of the anhydrous skarn stage (δD = −101.2 to −91.4‰, δ¹⁸O_H2O = 5.0 to 6.0‰) were of magmatic origin, the fluids of hydrous skarn and oxide stages (δD = −106.3 to −104.7‰, δ¹⁸O_H2O = 4.3 to 4.9‰) were characterized by fluid mixing with minor meteoric water, while the fluids of sulfide stages (δD = −117.4 to −108.6‰, δ¹⁸O_H2O = −3.4 to 0.3‰, δ¹³C_V-PDB= −12.2 to −10.9‰, and δ¹⁸O_V-SMOW = −2.2 to −0.7‰) were characterized by mixing of significant amount of meteoric water. The ore-forming fluids evolved from a high-temperature, high-salinity NaCl−H₂O boiling system to a low-temperature, low-salinity NaCl−H₂O mixing system. The garnet U-Pb dating constrains the formation of skarn to 132.1 ± 4.7 Ma (MSWD = 0.64), which aligns, within analytical uncertainty, with the weighted-mean U−Pb age of zircon grains in ore-related K-feldspar granite (132.6 ± 0.9 Ma; MSWD = 1.5). On the basis of these findings, the Huanggang deposit, formed in the Early Cretaceous, is a typical skarn-type system, in which ore precipitation was principally controlled by fluid boiling and mixing. Full article

On 23 January 2024, a M_S7.1 earthquake struck Wushi County, Xinjiang Uygur Autonomous Region, marking the largest seismic event in the Southern Tianshan (STS) region in the past century. This study investigates the relationship between hydrothermal fluid circulation and seismic activity by analyzing the chemical composition and origin of fluids in natural hot springs along the Maidan Fracture (MDF). Results reveal two distinct hydrochemical water types (Ca-HCO₃ and Ca-Mg-Cl). The δD and δ¹⁸O values indicating spring water are influenced by atmospheric precipitation input and altitude. Circulation depths (621–3492 m) and thermal reservoir temperatures (18–90 °C) were estimated. Notably, the high ³He/⁴He ratios (3.71 Ra) and mantle-derived ³He content reached 46.48%, confirming that complex gas–water–rock interactions occur at fracture intersections. Continuous monitoring at site S13 (144 km from the epicenter of the Wushi M_S7.1 earthquake) captured pre-and post-seismic hydrogeochemical fingerprints linked to the Wushi MS7.1 earthquake. Stress accumulation along the MDF induced permeability changes, perturbing hydrogeochemical equilibrium. At 42 days pre-Wushi M_S7.1 earthquake, δ¹³C DIC exceeded +2σ thresholds (−2.12‰), signaling deep fracture expansion and CO₂ release. By 38 days pre-Wushi M_S7.1 earthquake, Na⁺, SO₄²⁻, and δ¹⁸O surpassed 2σ levels, reflecting hydraulic connection between deep-seated and shallow fracture networks. Ion concentrations and isotope values showed dynamic shifts during the earthquake, which revealed episodic stress transfer along fault asperities. Post-Wushi M_S7.1 earthquake, fracture closure reduced deep fluid input, causing δ¹³C DIC to drop to −4.89‰, with ion concentrations returning to baseline within 34 days. Trace elements such as Be and Sr exhibited anomalies 12 days before the Wushi M_S7.1 earthquake, while elements like Li, B, and Rb showed anomalies 24 days after the Wushi M_S7.1 earthquake. Hydrochemical monitoring of hot springs captures such critical stress-induced signals, offering vital insights for earthquake forecasting in tectonically active regions. Full article

The Luhai uranium deposit is a large-scale uranium deposit newly discovered in recent years through comprehensive prospecting methods. It is located in the Basaiqi Paleochannel Uranium metallogenic belt of the Erlian Basin and is characterized by its shallow burial and large scale. This paper provides new data on the genetic processes of sandstone-type uranium mineralization through sedimentological and geochemical environmental indicators (such as Fe³⁺/Fe²⁺, organic carbon, total sulfur, etc.), analysis of C-O isotopes of carbonate cements and H-O isotopes of groundwater, and geochemical and mineralogical studies of uranium minerals, iron–titanium oxides (involving backscatter analysis, micro-area chemical composition determination, and elemental surface scanning), and organic matter. Sedimentological analysis shows that the ore- bearing layer in the upper member of the Saihan Formation developed a braided channel within floodplain subfacies, which control the distribution of uranium ore bodies. Uranium mineralogical observations, geochemical environmental indicators, and organic geochemical data indicate that the main reducing agents related to mineralization are pyrite, terrestrial plants, and deep-sourced oil and gas. The δD values of groundwater in the ore-bearing layer range from −95.34‰ to −90.68‰, and the δ¹⁸O values range from −12.24‰ to −11.87‰. For calcite cements, the δ¹⁸O_V-PDB values range from −24‰ to −11.5‰, and the δ¹⁸_OV-SMOW values range from 6.2‰ to 19‰. It was determined that the ore-forming fluid is mainly surface fresh water that entered the strata during the tectonic uplift stage, with local mixing of deep-sourced brine. Based on these data, the main modes of uranium mineralization in the paleochannel were obtained as follows: (1) Redox mineralization occurs due to the reducing medium within the sand body itself and the reduction caused by deep- sourced oil and gas generated from the Tengge’er and Arshan Formations. (2) Mineralization is achieved through the mixing of fluids from different sources. Furthermore, a genetic model related to uranium mineralization in the paleochannels of the Luhai area has been established: favorable uranium reservoirs were formed during the sedimentary period, and during the post-sedimentary stage, reverse structures promoted redox reactions and fluid-mixing-induced mineralization. The research findings can provide guidance for the exploration of paleochannel sandstone-type uranium deposits in other areas of the Erlian Basin. Full article

Water isotope studies in alpine wetlands have revealed the dynamic characteristics of the hydrological cycle and evapotranspiration processes in the Zoige region through hydrogen and oxygen isotope ratios. However, the hydrological continuity between marshes, rivers, and lakes in wetlands is relatively understudied. The study found that the Zoige Alpine Wetland local meteoric water line (LMWL) is δD = 8.33δ¹⁸O + 14.52 (R² = 0.92) by using linear regression analysis to confirm the Craig temperature effect equation backwards. Comparison with the global and Chinese LMWLs revealed that the slope of the Zoige LMWL is significantly higher than those of the global and Chinese LMWLs, indicating that the oceanic warm and humid airflow and the southwest monsoon significantly influence this region. The δ¹⁸O ranges of rivers, lakes, and marshes in the Zoige wetland were −12.86‰ to −2.02‰, −12.9‰ to −2.22‰, and −15.47‰ to −7.07‰, respectively. In terms of δD, marshes had the lowest δD values, with a mean value of −89.58‰, while rivers and lakes had close δD values of about −72‰. Rivers had the most dramatic variation in d-excess values, ranging from −34.16‰ to 3.68‰, while marshes and lakes had more concentrated d-excess values, with particularly negative values in marshes. Regression analysis yielded a trend line of δD = 5.41δ¹⁸O − 29.57 for evaporation from the water bodies, further demonstrating the importance of evaporation effects in this region. By using the Rayleigh fractionation model and estimating the climatic conditions, we found that the lake water had the highest evaporation intensity (41%). Those of the river and marsh water were 40% and 36%, respectively. The results of this study provide new scientific insights into the hydrological connectivity, evaporation processes, and water source characteristics in the Zoige wetland. Future studies can shed more light on how climate change affects wetland hydrological systems and how they change over time and space. This will help to manage water resources in the region and protect the environment. Full article

To explain one of the reasons why two adjacent deep-rooted desert plants can coexist over long periods, mutual water supply between species was investigated. The study focused on δD and δ¹⁸O stable isotopic characteristics of root water and soil water near the roots of Tamarix ramosissima Ledeb. and Alhagi sparsifolia Shap. in the Tarim River Basin in China during the growing season. The direct comparison method and the Mix SIAR model were employed to analyze the water sources of the plants and the contribution rates of each water source. A similarity proportional index was used to assess the hydraulic connections between plant species. The water sources of T. ramosissima and A. sparsifolia were soil water found at depths of 40 to 90 cm and 220 to 300 cm (a total contribution rate of 58.85%) and 130 to 190 and 240 to 300 cm (a total contribution rate of 81.35%) with groundwater depths of 2.5 to 3.0 m, respectively. When the groundwater depth increased to 4 m, the water sources for both T. ramosissima and A. sparsifolia were soil water at depths of 20 to 100 (a contribution rate of 70.60%) and 20 to 120 cm (a contribution rate of 49.60%), respectively. Both A. sparsifolia and T. ramosissima could lift water from deep soil or groundwater for their own growth needs and supply some water to each other, which suggests that desert plants were allowed to achieve mutual benefits and coexistence through hydraulic connections. These results enrich the theoretical understanding of desert plant coexistence and provide a scientific basis for desert vegetation restoration. Full article

Hydrogen and oxygen isotopes of ore-forming fluid of nephrite deposits have always been changing due to mixings between different fluids and oxygen isotope exchanges between the ore-forming fluid and country rocks, resulting in that the tremolite (or actinolite) has to constantly re-establish new isotope fractionation equilibriums with the dynamic fluid, which is of great significance to understand the genesis of hydrogen and oxygen isotopes of nephrite. Based on this, Taylor’s closed model and fluid mixing model are used to unravel the control of multi-stage evolution of ore-forming fluid on the δD and δ¹⁸O of nephrite. Although Taylor’s closed model is conducive to interpreting the genesis of nephrite with light δD and δ¹⁸O, such as Vitim nephrite, Russia, and Chuncheon nephrite, South Korea, it is unable to be effectively used in other nephrite. The fluid mixing model can quantitatively constrain proportions of different fluids during different ore-forming stages. Multiple solutions of ore-forming fluids of carbonate rock-related nephrite result from the absence of external constraints, such as isotope compositions of intrusive rocks, carbonate rocks, and meteoric water. Due to the generally heavy δ¹⁸O of country rocks, a small amount of meteoric water that enters the hydrothermal system in the later ore-forming stage is insufficient to offset the δ¹⁸O increment of nephrite caused by the oxygen isotope exchange between country rocks and water, which should be responsible for the abnormal heavy δ¹⁸O of Luodian nephrite, Dahua nephrite, Sanchakou nephrite, Xiaomeiling nephrite, etc., and not metamorphic water dominating their formation. Full article

This study focuses on a typical chemically contaminated site in the southeastern coastal region of China, investigating the natural attenuation mechanisms of benzene and o-toluidine in groundwater through high-throughput sequencing, physicochemical analyses, and stable isotope techniques. The results demonstrate significant heterogeneity in the spatial distribution and degradation processes of pollutants within the contaminated zones (W27, W28, W31). Environmental factors such as HCO₃⁻, SO₄²⁻, and ORP predominantly influence the microbial community structure and functional distribution. Stable isotope data reveal that δD and δ¹³C enrichment effects are most pronounced in the deep layer (W28_40m), indicating active pollutant degradation, while degradation in the deeper layers of W27 and W31 is constrained by anaerobic conditions and reduced microbial activity. The combined analysis of hydrogen and carbon isotopes elucidates the degradation pathways and dynamic processes of pollutants within the contaminated zones, providing quantitative evidence for natural attenuation mechanisms and scientific support for optimizing site remediation strategies. Full article

The Jiaojia gold deposit in the Jiaodong Peninsula, located in the northwestern part of the Jiaodong gold province in eastern China, has a gold reserve of over 300 t. Gold mineralization in Jiaojia deposit occurred in three stages: (1) The Pyrite–Quartz–Sericite Stage (Stage I) developed primary minerals that included quartz, sericite, and a small amount of anhedral pyrite, appearing as disseminations within milky quartz and foliated sericite. (2) The Quartz–Pyrite Stage (Stage II) developed quartz that appears smoky gray and pyrite that appears with a euhedral cubic morphology, with crystal faces oriented in a longitudinal pattern. Native gold occurs as fracture filling in pyrite. (3) The Quartz–Polymetallic Sulfides Stage (Stage III) developed polymetallic sulfides, including pyrite, chalcopyrite, galena, sphalerite, and magnetite. Native gold filled the pyrite fractures and was enclosed within the pyrite. (4) The Quartz–Carbonate Stage (Stage IV) developed the main minerals of quartz and carbonate, with scattered occurrences of pyrite. In situ geochemical analysis of pyrite, the main gold-carrying mineral from mineralization Stages I to III in the Jiaojia gold deposit, was conducted, including major element, trace element, and sulfur isotope analyses. The δ³⁴S values of Jiaojia pyrite range from 4.5 to 8.0‰. Pyrite in Stage I (Py I) has δ³⁴S values ranging from 4.5 to 7.4‰, with an average of 6.4‰. Pyrite in the Stage II (Py II) has δ³⁴S values ranging from 5.9 to 8.0‰, with an average of 6.8‰. Pyrite in Stage III (Py III) has δ³⁴S values ranging from 6.4 to 7.9‰, with an average of 7.4‰. Combined with the C-D-O-He isotopes, the ore-forming fluids of the Jiaojia gold deposit likely originated from subducted oceanic plate-related metasomatized mantle. The Co/Ni ratios of Jiaojia pyrite range from 0.50 to 1.47 in Stage I, 0.27 to 1.69 in Stage II, and 0.58 to 295 in Stage III. The Cu/Au ratios in the Jiaojia pyrite in all mineralization stages were >1. These geochemical features imply that the ore-forming fluids of the Jiaojia gold deposit were in a medium- to low-temperature reducing environment, with temperatures gradually decreasing from ore Stages I to III. The increase in Co and As in the pyrite of Stage III implies that gold precipitation resulted from fluid immiscibility caused by a decrease in pressure and temperature and an increase in the oxygen fugacity of the ore-forming fluid. Full article

The Biggenden gold-bearing Fe skarn deposit in southeast Queensland, Australia, is a calcic magnetite skarn that has been mined for Fe and gold (from the upper portion of the deposit). Skarn has replaced volcanic and sedimentary rocks of the Early Permian Gympie Group, which formed in different tectonic settings, including island arc, back arc, and mid-ocean ridge. This group has experienced a hornblende-hornfels grade of contact metamorphism due to the intrusion of the Late Triassic Degilbo Granite. The intrusion is a mildly oxidized I-type monzogranite that has geochemical characteristics intermediate between those of granitoids typically associated with Fe-Cu-Au and Sn-W-Mo skarn deposits. The skarn mineralogy indicates that there was an evolution from prograde to various retrograde assemblages. Prograde garnet (Adr_11-99Grs_1-78Alm_0-8Sps_0-11), clinopyroxene (Di_30-92Hd_7-65Jo_0-9), magnetite, and scapolite formed initially. Epidote and Cl-bearing amphibole (mainly ferropargasite) were the early retrograde minerals, followed by chlorite, calcite, actinolite, quartz, and sulfides. Late-stage retrograde reactions are indicated by the development of nontronite, calcite, and quartz. Gold is mainly associated with sulfide minerals in the retrograde sulfide stage. The fluids in equilibrium with the ore-stage calcites had δ¹³C and δ¹⁸O values that indicate deposition from magmatically derived fluids. The calculated δ¹⁸O values of the fluids in equilibrium with the skarn magnetite also suggest a magmatic origin. However, the fluids in equilibrium with epidote were a mixture of magmatic and meteoric water, and the fluids that deposited chlorite were at least partly meteoric. δD values for the retrograde amphibole and epidote fall within the common range for magmatic water. Late-stage chlorite was deposited from metasomatic fluids depleted in deuterium (D), implying a meteoric water origin. Sulfur isotopic compositions of the Biggenden sulfides are similar to other skarn deposits worldwide and indicate that sulfur was most probably derived from a magmatic source. Based on the strontium (⁸⁷Sr/⁸⁶Sr) and lead (²⁰⁶Pb/²⁰⁴Pb, ²⁰⁷Pb/²⁰⁴Pb and ²⁰⁸Pb/²⁰⁴Pb) isotope ratios, the volcanic and sedimentary rocks of the Gympie Group may have contributed part of the metals to the hydrothermal fluids. Lead isotope data are also consistent with a close age relationship between the mineralization at Biggenden and the crystallization of the Degilbo Granite. Microthermometric analysis indicates that there is an overall decrease in fluid temperature and salinity from the prograde skarn to retrograde alterations. Fluid inclusions in prograde skarn calcite and garnet yield homogenization temperatures of 500 to 600 °C and have salinities up to 45 equivalent wt % NaCl. Fluid inclusions in quartz and calcite from the retrograde sulfide-stage homogenized between 280 and 360 °C and have lower salinities (5–15 equivalent wt % NaCl). In a favored genetic model, hydrothermal fluids originated from the Degilbo Granite at depth and migrated through the shear zone, intrusive contact, and permeable Gympie Group rocks and leached extra Fe and Ca and deposited magnetite upon reaction with the adjacent marble and basalt. Full article

In this study, hydrogeochemistry and environmentally stable isotopes were employed to examine the processes involved in recharging aquifer systems and the changes in the groundwater chemistry caused by the interaction between the water and the aquifer matrix. Based on data derived from 113 groundwater wells, various tools and techniques, including stable environmental isotopes Oxygen-18 and Deuterium (δ¹⁸O and δD) for 33 samples and geochemical modeling with NETPATH, were used to evaluate the recharge mechanism and the evolution of the groundwater, combining GIS with hydrological and hydrochemical methods. The results revealed that groundwater from the Quaternary was the main source for irrigation; the water quality was categorized as relatively fresh to saline, with the total dissolved solids (TDSs) ranging from 261.3 to 8628.56 mg/L, exhibiting an average value of 2311.68 mg/L. The results of the environmental isotope analysis showed that the range of oxygen δ¹⁸O isotopes in the groundwater was from −5.65‰ to +0.39‰, while the range of hydrogen δD isotopes was from −32.60‰ to 4.73‰. Moreover, the δ¹⁸O–δD relationship indicated that the groundwater samples fell around the global meteoric precipitation line, showing a strong relationship, with a coefficient (R²) of approximately 0.82. The NETPATH model revealed that the dissolved chemical species within the groundwater system primarily originated from processes such as mineral weathering and dissolution, ion exchange, and evaporation. Full article