Machines Events Announce Your Event Here

25–29 March 2019 The 2019 International Conference on Industrial Engineering, Applications and Manufacturing

Sochi, the Russian Federation

The 2019 International Conference on Industrial Engineering, Applications and Manufacturing (ICIEAM-2019) is devoted to discussion of the latest achievements in the field of industrial engineering. It will be held in Sochi, the Russian Federation, on March 25-29, 2019. The conference is organized to promote interdisciplinary discussion and the presentation of research papers, summarizing research in technical disciplines in universities, research institutes, large industrial enterprises, scientific and industrial associations of the Russian Federation, as well as foreign authors, and research results obtained on the personal initiative of the authors.

The aim of the conference is to promote informing the scientists and practitioners of the most promising areas of research and achievements in the field of industrial engineering.

Conferences topics:
1. Control Systems and their Industrial Application;
2. Industrial Mechatronics, Automation and Robotics;
3. Electric Power Systems and Renewable Energy Sources;
4. Power Electronics, Electrical Machines and Drives;
5. Signal Processing and Real Time Embedded Control;
6. Modeling and Computer Technologies;
7. Theory and Applications of Dynamical Measurements.

Important dates:
- Deadline for paper submission is October 31, 2018;
- Notification of the participation in the program is February 01, 2019;
- The date of the conference are March 25-29, 2019.

http://icie-rus.org/index-ieam.html

8–12 July 2019 2019 IEEE/ASME International Conference on Advanced Intelligent Mechatronics

Hong Kong Science Park, Hong Kong, China

The 2019 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM 2019) will be held on July 8 -12, 2019 in Hong Kong Science Park, Hong Kong, China. As a flagship conference focusing on mechatronics and intelligent systems, the AIM 2019 will bring together an international community of experts to discuss the state-of-the-art, new research results, perspectives of future developments, and innovative applications relevant to mechatronics, robotics, automation, industrial electronics, and related areas.

https://www.aim2019.org/

29–30 November 2018 The Second International Conference of IFToMM ITALY (IFIT 2018)

Cassino, Italy

The aim of the Conference is to bring together researchers, industry professionals and students not only of the Italian community from the broad ranges of disciplines referring to Mechanism Science, in an intimate, collegial and stimulating environment. The second International Conference of the IFToMM ITALY association will be held at the Department of Civil and Mechanical Engineering of the University of Cassino and South Latium in Cassino, Italy.

Papers are welcome on topics related to the aspects of theory, design, practice and application of the Mechanism and Machine Science, including but not limited to:

  • Biomechanical Engineering
  • Mechanism Design
  • Computational Kinematics
  • Mechatronics
  • Dynamics of Machinery
  • Multibody Dynamics
  • Gearing and Transmissions
  • Robotics
  • History of Mechanism Science
  • Rotor Dynamics
  • Vibrations
  • Tribology
  • Industrial and Non-Industrial Applications

https://www.iftommitaly.it/ifit2018/

12–14 October 2018 2018 The 6th International Conference on Control, Mechatronics and Automation

Tokyo, Japan

2018 The 6th International Conference on Control, Mechatronics and Automation will be held in Tokyo, Japan on October 12-14, 2018. It is supported by International Association of Computer Science & Information Technology.

The idea of the conference is for the scientists, scholars, engineers and students from the Universities all around the world and the industry to present ongoing research activities, and hence to foster research relations between the Universities and the Industry. This conference is now a well-known event worldwide and the number of paper submissions and attendees are increasing every year. Prospective presenters and authors are encouraged to submit proposals for oral and poster presentations that offer new research and theoretical contributions in the field of Control, Mechatronics and Automation. Topics of interest for submission include, but are not limited to:

Intelligent mechatronics, robotics, biomimetics, automation, control systems

Opto-electronic elements and Materials, laser technology and laser processing

Elements, structures, mechanisms, and applications of micro and nano systems

Teleoperation, telerobotics, haptics, and teleoperated semi-autonomous systems

Sensor design, multi-sensor data fusion algorithms and wireless sensor networks

Biomedical and rehabilitation engineering, prosthetics and artificial organs

Control system modeling and simulation techniques and methodologies

AI, intelligent control, neuro-control, fuzzy control and their applications

Industrial automation, process control, manufacturing process and automation

Mechanical Engineering Testing

Mechanical System Engineering

Hydraulic Transmission and Control

Application of Hydraulic Technology

Fault Diagnosis and Troubleshooting of Hydraulic System

Design and Use of Hydraulic Servo System

Electromechanical Transmission Control

Robot

Design and Application of Electromechanical Control System

Measure Control Technology and Intelligent System

Mechanical Control and Information Processing Technology

Engineering Applications of Programmable Controller

 

http://iccma.org/index.html

9–12 July 2018 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM 2018)

Auckland, New Zealand

The 2018 IEEE/ASME International Conference on Advanced Intelligent Mechtronics (AIM 2018) will be held on July 9-12, 2018, in Auckland, New Zealand. The AIM 2018 conference brings to gether an international community of experts to discuss the state-of-the-art, new research results, perspectives of future developments, and innovative applications relevant to mechatronics, robotics, control, automation, and related areas.

The sponsors and organisers of AIM 2018 invite a submission of high quality mechatronics research papers describing original work, including the following topics: Actuators, Automotive Systems, Bioengineering, Data Storage Systems, Electronic Packaging, Fault Diagnosis, Human-Machine Interfaces,Industry Applications, Information Technology, Intelligent Systems, MachineVision, Manufacturing, Micro-Electro-Mechanical Systems, Micro/Nano Technology,Modeling and Design, System Identification and Adaptive Control, MotionControl, Vibration and Noise Control, Neural and Fuzzy Control, Opto-ElectronicSystems, Optomechatronics, Prototyping, Real-Time and Hardware-in-the-Loop Simulation, Robotics, Sensors, System Integration, Transportation Systems,Smart Materials and Structures, Energy Harvesting, and other frontier fields.

http://aim2018.org/

13–16 May 2018 20th annual Nanotech 2018 Conference & Expo (NANOTECH 2018)

Anaheim Convention Center, California, USA

Meet Us at The 20th annual Nanotech 2018 Conference & Expo (NANOTECH 2018) (Booth # 319), Anaheim, CA, USA, 13–16 May 2018

We will be attending The 20th annual Nanotech 2018 Conference & Expo (NANOTECH 2018), co-located with the TechConnect World Innovation Conference, Defense TechConnect Summit and Spring SBIR/STTR Conference. The event will attract more than 350 featured exhibitors and an expected crowd of more than 4000 attendees, including business executives, venture capitalists, politicians, s cientists and researchers from over 70 countries. Nanotech contains 38 symposiums and brings together specialists from a wide range of scientific fields, technology and business.

Representatives of the following open access journals will attend:

Sensors
Materials
Nanomaterials
Journal of Functional Biomaterials
Journal of Imaging
Sustainability
Fluids
Photonics
Electronics
Catalysts
Applied Sciences
Inventions
Diagnostics
Cancers
Journal of Low Power Electronics and Applications
Designs
Pharmaceuticals
C
Inorganics
International Journal of Environmental Research and Public Health
Machines
Pharmaceutics
Journal of Manufacturing and Materials Processing
Actuators
Robotics
Energies
Biosensors
Chemosensors
Membranes
Coatings
Micromachines

If you will also attend this conference, please feel free to stop by our booth (Booth # 319). Our delegates look forward to meeting you in person to answer any questions you may have. For more information about the conference, please visit:

https://www.techconnectworld.com/Nanotech2018/

13–16 May 2018 20th annual Nanotech 2018 Conference & Expo (NANOTECH 2018)

Anaheim Convention Center, California, USA

Meet Us at The 20th annual Nanotech 2018 Conference & Expo (NANOTECH 2018) (Booth # 319), Anaheim, CA, USA, 13–16 May 2018

We will be attending The 20th annual Nanotech 2018 Conference & Expo (NANOTECH 2018), co-located with the TechConnect World Innovation Conference, Defense TechConnect Summit and Spring SBIR/STTR Conference. The event will attract more than 350 featured exhibitors and an expected crowd of more than 4000 attendees, including business executives, venture capitalists, politicians, s cientists and researchers from over 70 countries. Nanotech contains 38 symposiums and brings together specialists from a wide range of scientific fields, technology and business.

Representatives of the following open access journals will attend:

Sensors
Materials
Nanomaterials
Journal of Functional Biomaterials
Journal of Imaging
Sustainability
Fluids
Photonics
Electronics
Catalysts
Applied Sciences
Inventions
Diagnostics
Cancers
Journal of Low Power Electronics and Applications
Designs
Pharmaceuticals
C
Inorganics
International Journal of Environmental Research and Public Health
Machines
Pharmaceutics
Journal of Manufacturing and Materials Processing
Actuators
Robotics
Energies
Biosensors
Chemosensors
Membranes
Coatings
Micromachines

If you will also attend this conference, please feel free to stop by our booth (Booth # 319). Our delegates look forward to meeting you in person to answer any questions you may have. For more information about the conference, please visit:

https://www.techconnectworld.com/Nanotech2018/

21–26 April 2018 Meet Us at the ACM CHI Conference on Human Factors in Computing Systems (CHI 2018) (Booth # 312), Montreal, Canada, 21-26 April 2018

Montreal, Canada

We will be attending the ACM CHI Conference on Human Factors in Computing Systems (CHI 2018). The ACM CHI Conference on Human Factors in Computing Systems is the premier international conference of Human-Computer Interaction. For first-time attendees, CHI is a place where researchers and practitioners gather from across the world to discuss the latest in interactive technology. We are a multicultural community from highly diverse backgrounds who together investigate new and creative ways for people to interact.

Representatives of the following open access journals will attend:

Future Internet
Computers
Machines
Informatics
Sensors
Information
Designs
Robotics
Technologies
MTI

If you will also attend this conference, please feel free to stop by our booth (Booth # 312). Our delegates look forward to meeting you in person to answer any questions you may have. For more information about the conference, please visit:

https://chi2018.acm.org

20–23 April 2018 The 4th International Conference on Control, Automation and Robotics (ICCAR 2018)

Auckland, New Zealand

Following the success of previous ICCAR conferences (2015 in Singapore, 2016 in Hong Kong, 2017 in Nagoya, Japan), we sincerely invite you to take part in 2018 The 4th International Conference on Control, Automation and Robotics (ICCAR 2018) in Auckland, New Zealand during April 20-23, 2018.

ICCAR 2018 is a not-to-be-missed opportunity that distills the most current knowledge on a rapidly advancing discipline in one conference. Join key researchers and established professionals in the field of control, automation and robotics as they assess the current state-of-the-art and roadmap crucial areas for future research. It will provide a valuable opportunity for researchers ,scholars and scientists to exchange their ideas face to face We have the strong organization team, dependable reputation and wide sponsors all around the world. It will bring you an unexpected harvest.

We will be thankful for the contributions to ICCAR 2018. We look forward to your participation and continued engagement at future ICCAR conferences.

http://iccar.org/files/ICCAR2018CFP.pdf

http://www.iccar.org/

17–19 April 2018 The 9th International Conference on Power Electronics, Machines and Drives (PEMD 2018)

Liverpool ACC, Liverpool, UK

PEMD is a popular three-day conference that brings together hundreds of power electronics, machines and drives specialists from around the world to deliver the latest developments in the technologies and applications of electrical drives, machines and power electronic systems.

This is your chance to present your latest research results, innovative application or operational advances to the 450 strong audience of expert industrial representatives and academia.

Take advantage of a presentation slot in the conference programme and receive significant and unparalleled publication opportunities.

http://events.theiet.org/pemd/index.cfm?origin=machines

7–11 February 2018 2018 4th International Conference on Mechatronics and Robotics Engineering (ICMRE 2018)

University of Valenciennes, Valenciennes, France

2018 4th International Conference on Mechatronics and Robotics Engineering will be held in University of Valenciennes, Valenciennes, France on February 7-11, 2018. The aim of ICMRE 2018 is to povide a platform for researchers, engineers, academics as well as industry professionals from all over the world to present their research results and development activities in the area of Mechatronics and Robotics Engineering. This conference provides opportunities for delegates to exchange new ideas and research findings in a face to face environment, to establish business or research relationships and to find global partners for future collaboration.

http://www.icmre.org/

5–7 February 2018 The 7th International Conference on Manufacturing Engineering and Process (ICMEP 2018)

Barcelona, Spain

2018 The 7th International Conference on Manufacturing Engineering and Process (ICMEP 2018) is a platform for researchers, engineers, academicians as well as industrial professionals from all over the world to present their research results and development activities in Manufacturing Engineering and Process.This conference provides opportunities for the delegates to exchange new ideas and application experiences face to face, to establish business or research relations and to find global partners for future collaboration.

It will take place Barcelona, Spain, February 5-7, 2018. We will be thankful for the contributions to ICMEP 2018. We look forward to your participation and continued engagement.

http://www.icmep.org/

13–16 December 2017 2017 Third International Conference on Mechanical and Aeronautical Engineering (ICMAE 2017)

Dubai, UAE

2017 Third International Conference on Mechanical and Aeronautical Engineering (ICMAE 2017) will take place in Dubai, UAE, December 13-16, 2017. ICMAE 2017 aims at the crossroads between scientists, researchers, decision makers, practitioners and students from all the diverse domains that Mechanical and Aeronautical Engineering, Robotics and Automation, Intelligent Systems, Aeroelasticity, Aerodynamics and Fluid Mechanics, Flight Simulation and Mechanics, Dynamics and Control.

This conference will provide a remarkable opportunity for the academic and industrial communities to address new challenges, share solutions and discuss future research directions. The agenda will include keynote speeches, plenary speeches, and invited/special sessions. Contributions are expected from academia, industry, and government institutions and agencies.

We sincerely welcome our colleagues worldwide to join us for this conference in Dubai in December 13-16, 2017!

http://www.icmae.net/

8–11 November 2017 2017 International Conference on Advanced Manufacturing and Design Engineering (CAMDE 2017)

Ho Chi Minh City, Vietnam

Welcome to the official website of 2017 International Conference on Advanced Manufacturing and Design Engineering (CAMDE 2017). CAMDE 2017 will be held in Ho Chi Minh City, Vietnam from November 8-11, 2017.

This conference is aimed at providing a platform for all researchers and engineers to share ideas, highly developed skills and successful practices to others. The conference will be last for 4 days with the reception to be held in the first day to meet and mingle with conference chairs, session chairs and other participants.

We would like to invite you to join us in this important event and share your recent advance development and research finding in Advanced Manufacturing and Design Engineering to all attendees. Besides, it is also a good opportunity for you and your family to enjoy the culture and view in Ho Chi Minh City. We're looking forward to seeing you in CAMDE 2017.

http://www.camde.org/index.html

6–9 September 2017 9th international congress on precision machining

Athens, Greece

It is our pleasure to invite you to attend the 9th International Congress on Precision Machining (ICPM 2017), organized by the National Technical University of Athens, which will be held in Athens, the capital city of Greece, in September 2017.
The International Congress on Precision Machining is a biennial event, which is developing into a major international happening with a growing number of delegates from around the globe. Scientists and engineers use this platform to share their research findings, exchange ideas, discover novel opportunities, meet with colleagues or acquaint with new friends from abroad, broaden their knowledge and bridge the gap between academia and industry.
Papers on various topics are welcome in the field of precision machining. The different points of view, which will be shared by the academic and industrial practitioners, will contribute significantly to the developments in this area of technology, which is of great importance in contemporary industry.
The topics concern a broad range of issues that are of interest to researchers, manufacturers, businessmen and consumers of engineering materials and their products. However, we hope that the presented topics will contribute to the collaboration of the participants in many aspects, as well as to the enhancement of the contacts between education, science and business, which will be of mutual benefit.
The organizers are proud to be hosting ICPM 2017 for the first time and are looking forward to welcoming you and meeting you in Greece.

http://www.icpm2017.gr

17–19 August 2017 2017 3rd International Conference on Control Science and Systems Engineering (ICCSSE 2017)

Beijing, China

Following the success of ICCSSE 2014 in Yantai, China during December 29-30,2014, ICCSSE 2016 in Singapore during July 27-29, ICCSSE 2017 will take place at China Agricultural University-Beijing,China. The conference is Co-sponsored by China Agricultural University, China, National Taiwan University, Taiwan, University of Malaya, Malaysia and Huazhong University of Science and Technology, China.

Control Science and Systems Engineering are entering the second golden phase. These newchallenges bring with it new research questions resulting in the need tostimulate the rapid awareness of this very important research field,especially among the young researchers.ICCSSE14 was a wonderful opportunity, the support that we received and the enthusiasm which was witnessed has been truly beyond our expectations. Plan now to be part of this exceptional conference, as an attendee, event sponsor, or exhibitor. ICCSSE 2017 is where you will meet and network with energy leaders, business innovators, researchers, academics and policy makers from across the globe.

http://www.iccsse.com/

16–19 June 2017 2017 2nd Asia-Pacific Conference on Intelligent Robot Systems (ACIRS 2017)

Wuhan, China

ACIRS 2017 provides a forum for scientific advances in the theory and practice of Intelligent Robot Systems. It is a highly selective, single-track meeting that will be soliciting submissions presenting significant, original, and previously unpublished research. ACIRS 2017 aims to be one of the leading international conferences in the Asia Pacific region, and will provide an exciting environment for researchers to present and discuss the latest technologies, algorithms, system architectures, and applications.

http://www.acirs.org/index.html

11–17 November 2016 ASME's International Mechanical Engineering Congress and Exposition (IMECE)

Phoenix, AZ, USA

ASME's International Mechanical Engineering Congress and Exposition (IMECE) is the largest interdisciplinary mechanical engineering conference in the world. IMECE plays a significant role in stimulating innovation from basic discovery to translational application. It fosters new collaborations that engage stakeholders and partners not only from academia, but also from national laboratories, industry, research settings, and funding bodies.

Among the 4,000 attendees from 75+ countries are mechanical engineers in advanced manufacturing, aerospace, advanced energy, fluids engineering, heat transfer, design engineering, materials, energy production, conservation and recovery, applied mechanics, power, rail transportation, nanotechnology, bioengineering, internal combustion engines, environmental engineering, and more.

The IMECE program features:

  • Presentations spanning 20+ tracks and more than 240 topics in mechanical engineering
  • An opening keynote from one of the leading innovators in the field
  • Daily conference-wide plenary sessions featuring technological pioneers
  • Daily invited industry presentations 
  • Access to today’s leading engineers, educators, entrepreneurs and innovators highlighted during the Honors Assembly and other awards programs
  • Networking opportunities with potential mentors, colleagues, employers and vendors
  • And much, much more!

https://www.asme.org/events/imece

27–29 July 2016 2016 2nd International Conference on Control Science and Systems Engineering (ICCSSE 2016)

Singapore

Following the success of ICCSSE 2014 in Yantai, China during December 29-30,2014,  ICCSSE 2016 returns to the national and international stage. Sponsored by Shandong Institute of Business and Technology, Shandong University and China University of Geosciences, Co-sponsored by York University,Canada, DongHua University, China, Beijing Jiaotong University and China University of Mining and Technology, The 2nd International Conference on Control Science and Systems Engineering will be held at Singapore, during  July 27-29. Control Science and Systems Engineering are entering the second golden phase. These newchallenges bring with it new research questions resulting in the need tostimulate the rapid awareness of this very important research field,especially among the young researchers.ICCSSE14 was a wonderful opportunity, the support that we received and the enthusiasm which was witnessed has been truly beyond our expectations. Plan now to be part of this exceptional conference, as an attendee, event sponsor, or exhibitor. ICCSSE 2016 is where you will meet and network with energy leaders, business innovators, researchers, academics and policy makers from across the globe.

http://www.iccsse.com/index.html

13–15 July 2016 2016 International Conference on Automation, Control and Robotics Engineering (CACRE 2016)

Kitakyushu, Japan

2016 International Conference on Automation, Control and Robotics Engineering is organized by Hong Kong Society of Mechanical Engineers, technically supported by Kyushu Institute of Technology. CACRE 2016 will be held in conjunction with 2016 International Conference on Artificial Intelligence and Robotics ( ICAIR 2016).

The conference will be held in Kitakyushu, Japan from 13 to 15 July, 2016. CACRE 2016 will afford delegates unparalleled opportunities to interact and network with qualified professionals from throughout the world. We sincerely invite you and your colleagues immediately mark this event on your calendar and make your plans to Japan.

http://www.cacre.org/

15–17 June 2016 2016 3rd International Conference on Mechanics and Mechatronics Research (ICMMR 2016)

Chongqing, China

2016 3rd International Conference on Mechanics and Mechatronics Research (ICMMR 2016) will be held in Chongqing, China during June 15-17, 2016. ICMMR 2016 is co-sponsored by China University of Mining and Technology, China; Beijing Jiaotong University, China; Donghua University, China; Hefei University of Technology, China and York University, Canada. The idea of the conference is for the scientists, scholars, engineers and students from the Universities all around the world and the industry to present ongoing research activities, and hence to foster research relations between the Universities and the industry.

http://www.icmmr.org/

19–21 April 2016 The 8th International Conference on Power Electronics, Machines and Drives

The Hilton Hotel, Glasgow, UK

The IET is pleased to invite Machines readers to take part in the programme of one of the world’s most important power electronics conferences. PEMD 2016 will bring together hundreds of power electronics, machines and drives specialists from around the globe to discuss the latest developments in the technologies and applications of electrical drives, machines and power electronic systems.
The last conference, held in 2014, attracted over 400 engineers from 40 countries, making PEMD the ideal opportunity to share your latest research and results with the international industry.
Successful authors benefit from:
• An oral or interactive presentation in the conference programme
• Your full paper published by the IET in the conference proceedings
• Published within IET Inspec and the IET Digital Library
• Submitted for indexing on IEEE Xplore
• A preferential registration rate at the conference
Key conference themes:
• Power electronics
• Machines and drives
• Transportation
• Renewable energy systems
• Generation, transmission and distribution
• Industrial processes and applications

http://conferences.theiet.org/pemd/index.cfm?origin=machines

13–15 July 2015 4th International Symposium on Sensor Science (I3S)

Basel, Switzerland

13th-15th July 2015
Pharmacenter, University of Basel, Basel, Switzerland
An international scientific conference sponsored by the journal Sensors under the patronage of the University of Basel.

The 4th edition of the International Symposium on Sensor Science (I3S) will be held from 13th to 15th July 2015 in Basel, Switzerland. It will comprise 5 five plenary sessions and one afternoon with three parallel sessions to cover the most exciting aspects and the latest developments of sensor science (see below for a list of topics). A conference dinner will take place on the second evening of the conference.

If you are interested in participating in this symposium, in presenting a poster, or in being selected for a short talk, please get in touch with the conference secretariat. More details on the program will be available by the end of November 2014.

The Symposium will be accompanied by the publication of the I3S 2015 Selected Papers Topical Collection. Manuscripts can be submitted at any time after the Symposium. Authors who attended the conference will enjoy a 20% discount on APCs of manuscripts published in this collection.

More details are available from the conference website.

http://sciforum.net/conference/I3S2015/

4–7 August 2013 ASME 2013 International Design Engineering Technical Conferences (IDETC) and Computers and Information in Engineering Conference (CIE)

Portland, OR, USA

The ASME 2013 International Design Engineering Technical Conferences (IDETC) and Computers and Information in Engineering Conference (CIE) will take place during August 4-7, 2013 in Portland, OR. The conference is the flagship international meeting for Design Engineering and includes the following conferences:

  • 15th International Conference on Advanced VehicleTechnologies (AVT)
  • 33rd Computers and Information in Engineering Conference (CIE)
  • 39th Design Automation Conference (DAC)
  • 10th International Conference on Design Education (DEC)
  • 18th Design for Manufacturing and the Life Cycle Conference (DFMLC)
  • 25th International Conference on Design Theory and Methodology (DTM)
  • 37th Mechanisms and Robotics Conference (MR)
  • 2013 ASME/IEEE International Conference on Mechatronic and Embedded Systems and Applications (MESA2013)
  • 7th International Conference on Micro- and Nanosystems (MNS)
  • 9th International Conference on Multibody Systems, Nonlinear Dynamics, and Control (MSNDC)
  • ASME 2013 Power Transmission and Gearing Conference (PTG)
  • 22nd Reliability, Stress Analysis, and Failure Prevention Conference (RSAFP)
  • 25th Conference on Mechanical Vibration and Noise (VIB)

Technical papers describing research results are solicited for the 2013 IDETC/CIE which will also include plenary sessions, keynote lectures, and tutorials on topics related to engineering design and computers in engineering. These conferences provide a unique forum for the sharing of recent research results as well as networking with friends and colleagues. Industry participation is particularly encouraged so that the conferences may provide opportunities for fruitful exchanges between the research and industrial communities.

http://www.asmeconferences.org/idetc2013/

9–13 July 2013 The 2013 IEEE/ASME International Conference on Advanced Intelligent Mechatronics

Wollongong, Australia

The 2013 IEEE/ASME International Conference on Advanced Intelligent Mechatronics will be held on July 9-12, 2013 in Wollongong. AIM 2013 conference brings together an international community of experts to discuss the state-of-the-art, new research results, perspectives of future developments, and innovative applications relevant to mechatronics, robotics, control, automation, and related areas.

The theme of the conference is “Mechatronics for Human Wellbeing”, which emphasises the significance of Mechatronics in enhancing the quality of life for society.

AIM 2013 conference invites submissions of high quality research papers describing original work on the following topics, but not limited to: Actuators, Automotive Systems, Bioengineering, Data Storage Systems, Electronic Packaging, Fault Diagnosis, Human-Machine Interfaces, Industry Applications, Information Technology, Intelligent Systems, Machine Vision, Manufacturing, Micro-Electro-Mechanical Systems, Micro/Nano Technology, Modeling and Design, Motion Vibration and Noise Control, Neural and Fuzzy Control, Opto-Electronic Systems, Prototyping, Real-Time and Hardware-in-the-Loop Simulation, Robotics, Sensors, System Integration, Transportation Systems, Smart Materials and Structures, Energy Harvesting and other frontier fields of mechatronics.

http://www.aim2013.org/

17–19 June 2013 The 2013 American Control Conference

Washington, DC, USA

The 2013 American Control Conference will be held Monday through Wednesday, June 17 - 19, at the Renaissance Washington, DC Downtown Hotel, which is centrally located in Washington, DC, within 7 blocks of the White House, the US Capitol building, the National Mall, and the Smithsonian Institution. The hotel is also within 2 blocks of an extensive restaurant district.

The ACC is the annual conference of the American Automatic Control Council, the U.S. national member organization of the International Federation for Automatic Control. National and international society cosponsors of ACC include American Institute of Aeronautics and Astronautics, American Institute of Chemical Engineers, American Society of Civil Engineers, American Society of Mechanical Engineers, IEEE Control Systems Society, International Society of Automation, Society for Modeling & Simulation International, and Society for Industrial & Applied Mathematics .

The ACC is internationally recognized as a premier scientific and engineering conference dedicated to the advancement of control theory and practice. The ACC brings together an international community of researchers and practitioners to discuss the latest findings in control research and practice.

The 2013 ACC will feature several kinds of presentations including contributed and invited papers, invited sessions, tutorial sessions, and special sessions along with workshops and exhibits. The conference will also feature theme tracks in sustainability, societal challenges for control, and smart healthcare systems.

In addition to the high-quality technical program that the 2013 ACC Organizing Committee is working hard to ensure, the traditional conference banquet will be transformed to an evening at the National Air and Space Museum (NASM) on June 18, 2013. ACC attendees and their guests will have exclusive use of the museum for the evening, including free screenings of shows in NASM's IMAX Theater and Planetarium.

The ACC 2013 Operating Committee invites the worldwide participation of all those interested in the theory and practice of control systems.

http://a2c2.org/conferences/acc2013/

12–14 June 2013 The 10th IEEE International Conference on Control & Automation (IEEE ICCA 2013)

Hangzhou, China

The 10th IEEE International Conference on Control & Automation (IEEE ICCA 2013) will be held Wednesday through Friday, June 12-14, 2013, in Hangzhou, China. The conference is jointly organized by IEEE Control Systems Chapter, Singapore, State Key Lab. of Industrial Process Control, China, National Engineering Research Centre of Industrial Automation, China, and IEEE Control Systems Chapter, Nanjing, China. It is technically sponsored by IEEE Control Systems Society, the Technical Committee of Process Control of Chinese Association of Automation, and Zhejiang University. It aims to create a forum for scientists and practicing engineers throughout the world to present the latest research findings and ideas in the areas of control and automation.

http://ieee-icca.org/

3–6 March 2013 HRI 2013. 8th ACM/IEEE International Conference on Human-Robot Interaction

Tokyo, Japan

HRI 2013 is the 8th Annual Conference for basic and applied human-robot interaction research. Scientists from across the world submit their best work and attend HRI to hear the latest theories, data, and videos from the world’s best HRI researchers.

Each year, the HRI conference highlights a particular area. HRI 2013 is devoted to exploring the theme of Holistic Human-Robot development. Robotic solutions are increasingly applied to real world problems such as our aging society, renewable energy, climate control, emergency response, education and exploration. These societal problems require a holistic approach to the design and development of robots that meet human needs, address technical challenges, and foster acceptance in everyday settings.

HRI is a single-track, highly selective annual international conference that seeks to showcase the very best interdisciplinary and multidisciplinary research in human-robot interaction with roots in social psychology, cognitive science, HCI, human factors, artificial intelligence, robotics, organizational behavior, anthropology and many more, and we invite broad participation.

http://humanrobotinteraction.org/2013/

24–26 April 2012 MFPT 2012

Dayton, OH, USA

The Conference focuses on the development and application of prognostics and health management technologies, and shows how practical technologies can be integrated into a platform or system.

The MFPT Society originated in 1967 under the leadership and sponsorship of the Office of Naval Research as the Mechanical Failures Prevention Group (MFPG). The MFPG was formed primarily to provide a mechanism for effective interchange of technical information among segments of the scientific and engineering communities in order to gain a better understanding of the processes of mechanical failures. The anticipated result was to reduce the incidence of mechanical failures by improving design methodology, to devise methods of accurately predicting mechanical failures and to apply the increased knowledge of the field to current problems. In this way the MFPT Society acts as a focal point for technological developments that contribute to mechanical failure reduction or prevention.

Topics:

· Data/Knowledge Management
· Electronics and Power Systems Health Management 
· Engineering Solutions for Failure Prevention 
· Tribology 
· Gear and Bearing Prognostics and Health Management (PHM)
· Health Management Strategies
· PHM Applications
· PHM Techniques
· Signal Analysis
· Sensors
· Distributed Systems Architecture
· Failure Prevention for Materials and Structures

http://www.mfpt.org/MFPT2012/MFPT2012.htm

Back to Top