Accurate crop-type maps are urgently needed as input data for various applications, leading to improved planning and more sustainable use of resources. Satellite remote sensing is the optimal tool to provide such data. Images from Synthetic Aperture Radar (SAR) satellite sensors are preferably used as they work regardless of cloud coverage during image acquisition. However, processing of SAR is more complicated and the sensors have development potential. Dealing with such a complexity, current studies should aim to be reproducible, open, and built upon free and open-source software (FOSS). Thereby, the data can be reused to develop and validate new algorithms or improve the ones already in use. This paper presents a case study of crop classification from microwave remote sensing, relying on open data and open software only. We used 70 multitemporal microwave remote sensing images from the Sentinel-1 satellite. A high-resolution, high-precision digital elevation model (DEM) assisted the preprocessing. The multi-data approach (MDA) was used as a framework enabling to demonstrate the benefits of including external cadastral data. It was used to identify the agricultural area prior to the classification and to create land use/land cover (LULC) maps which also include the annually changing crop types that are usually missing in official geodata. All the software used in this study is open-source, such as the Sentinel Application Toolbox (SNAP), Orfeo Toolbox, R, and QGIS. The produced geodata, all input data, and several intermediate data are openly shared in a research database. Validation using an independent validation dataset showed a high overall accuracy of 96.7% with differentiation into 11 different crop-classes. Full article

This paper presents our implementation of a harmonized data model for noise simulations in the European Union (EU). Different noise assessment methods are used by different EU member states (MS) for estimating noise at local, regional, and national scales. These methods, along with the input data extracted from the national registers and databases, as well as other open and/or commercially available data, differ in several aspects and it is difficult to obtain comparable results across the EU. To address this issue, a common framework for noise assessment methods (CNOSSOS-EU) was developed by the European Commission’s (EC) Joint Research Centre (JRC). However, apart from the software implementations for CNOSSOS, very little has been done for the practical guidelines outlining the specifications for the required input data, metadata, and the schema design to test the real-world situations with CNOSSOS. We describe our approach for modeling input and output data for noise simulations and also generate a real world dataset of an area in the Netherlands based on our data model for simulating urban noise using CNOSSOS. Full article

The information of land use plays an important role in urban planning and optimizing the allocation of resources. However, traditional land use classification is imprecise. For instance, the type of commercial land is highly filled with the categories of shopping, eating, etc. The number of mixed-use lands is increasingly growing nowadays, and these lands sometimes are too mixed to be well investigated by conventional approaches such as remote sensing technology. To address this issue, we used a new social sensing approach to classify land use according to human mobility and activity patterns. Previous studies used other social sensing approaches to predict land use types at the parcel or the area level, whilst fine-grained point-of-interest (POI)-level land use data are likely to more useful in urban planning. To abridge this research gap, we proposed a new social sensing approach dedicated to classifying land use at a finer scale (i.e., POI-level or building level) according to human mobility and activity patterns reflected by location-based social network (LBSN) data. Specifically, we firstly investigated spatial and temporal patterns of human mobility and activity behavior using check-in data from a popular Chinese LBSN named Sina Weibo and subsequently applied those patterns to predicting the category of POI to refine urban land use classification in Guangzhou, China. In this study, we applied three classification methods (i.e., naive Bayes, support vector machines, and random forest) to recognize category of a certain POI by spatial and temporal features of human mobility and activity behavior as well as POIs’ locational characteristics. Random forest outperformed the other two methods and obtained an overall accuracy of 72.21%. Apart from that, we compared the results of the different rules in filtering check-in samples. The comparison results show that a reasonable rule to select samples is essential for predicting the category of POI. Moreover, the approach proposed in this study can be potentially applied to identifying functions of buildings according to visitors’ mobility and activity behavior and buildings’ locational characteristics. Full article

The aim of the following study was to present three alternative methods of visualization on animated maps illustrating the movement of people gathered at an open-air event recorded on photographs taken by a drone. The effectiveness of an orthorectified low-level aerial image (a so-called orthophoto), a dot distribution map, and a buffer map was tested in an experiment featuring experts, and key significance was attached to the juxtaposition of objective responses with subjective opinions. The results of the study enabled its authors to draw conclusions regarding the importance of visualizing topographic references (stable objects) and people (mobile objects) and the usefulness of the particular elements of animated maps for their analysis and interpretation. Full article

As a recognized type of art, graffiti is a cultural asset and an important aspect of a city’s aesthetics. As such, graffiti is associated with social and commercial vibrancy and is known to attract tourists. However, positional uncertainty and incompleteness are current issues of open geo-datasets containing graffiti data. In this paper, we present an approach towards detecting building facades with graffiti artwork based on the automatic interpretation of images from Google Street View (GSV). It starts with the identification of geo-tagged photos of graffiti artwork posted on the photo sharing media Flickr. GSV images are then extracted from the surroundings of these photos and interpreted by a customized, i.e., transfer learned, convolutional neural network. The compass heading of the GSV images classified as containing graffiti artwork and the possible positions of their acquisition are considered for scoring building facades according to their potential of containing the artwork observable in the GSV images. More than 36,000 GSV images and 5000 facades from buildings represented in OpenStreetMap were processed and evaluated. Precision and recall rates were computed for different facade score thresholds. False-positive errors are caused mostly by advertisements and scribblings on the building facades as well as by movable objects containing graffiti artwork and obstructing the facades. However, considering higher scores as threshold for detecting facades containing graffiti leads to the perfect precision rate. Our approach can be applied for identifying previously unmapped graffiti artwork and for assisting map contributors interested in the topic. Furthermore, researchers interested on the spatial correlations between graffiti artwork and socio-economic factors can profit from our open-access code and results. Full article

The analytic hierarchy process (AHP), a decision-making method, allows the relative prioritization and assessment of alternatives under multiple criteria contexts. This method is also well suited for road selection. The method for road selection based on AHP involves four steps: (i) Points of Interest (POIs), the point-like representations of the facilities and habitations in maps, are used to describe and build the contextual characteristic indicator of roads; (ii) form an AHP model of roads with topological, geometrical, and contextual characteristic indicators to calculate their importance; (iii) select roads based on their importance and the adaptive thresholds of their constituent density partitions; and (iv) maintain the global connectivity of the selected network. The generalized result at a scale of 1:200,000 by AHP-based methods better preserved the structure of the original road network compared with other methods. Our method also gives preference to roads with relatively significant contextual characteristics without interfering with the structure of the road network. Furthermore, the result of our method largely agrees with that of the manual method. Full article

Finding clusters of events is an important task in many spatial analyses. Both confirmatory and exploratory methods exist to accomplish this. Traditional statistical techniques are viewed as confirmatory, or observational, in that researchers are confirming an a priori hypothesis. These methods often fail when applied to newer types of data like moving object data and big data. Moving object data incorporates at least three parts: location, time, and attributes. This paper proposes an improved space-time clustering approach that relies on agglomerative hierarchical clustering to identify groupings in movement data. The approach, i.e., space–time hierarchical clustering, incorporates location, time, and attribute information to identify the groups across a nested structure reflective of a hierarchical interpretation of scale. Simulations are used to understand the effects of different parameters, and to compare against existing clustering methodologies. The approach successfully improves on traditional approaches by allowing flexibility to understand both the spatial and temporal components when applied to data. The method is applied to animal tracking data to identify clusters, or hotspots, of activity within the animal’s home range. Full article

Linguistic landscape research focuses on relationships between written languages in public spaces and the sociodemographic structure of a city. While a great deal of work has been done on the evaluation of linguistic landscapes in different cities, most of the studies are based on ad-hoc interpretation of data collected from fieldwork. The purpose of this paper is to develop a new methodological framework that combines computer vision and machine learning techniques for assessing the diversity of languages from street-level images. As demonstrated with an analysis of a small Chinese community in Seoul, South Korea, the proposed approach can reveal the spatiotemporal pattern of linguistic variations effectively and provide insights into the demographic composition as well as social changes in the neighborhood. Although the method presented in this work is at a conceptual stage, it has the potential to open new opportunities to conduct linguistic landscape research at a large scale and in a reproducible manner. It is also capable of yielding a more objective description of a linguistic landscape than arbitrary classification and interpretation of on-site observations. The proposed approach can be a new direction for the study of linguistic landscapes that builds upon urban analytics methodology, and it will help both geographers and sociolinguists explore and understand our society. Full article

This study analyzed the spillovers among intra-urban housing submarkets in Beijing, China. Intra-urban spillover imposes a methodological challenge for housing studies from the spatial and temporal perspectives. Unlike the inter-urban spillover, the range of every submarket is not naturally defined; therefore, it is impossible to evaluate the intra-urban spillover by standard time-series models. Instead, we formulated the spillover effect as a Markov chain procedure. The constrained clustering technique was applied to identify the submarkets as the hidden states of Markov chain and estimate the transition matrix. Using a day-by-day transaction dataset of second-hand apartments in Beijing during 2011–2017, we detected 16 submarkets/regions and the spillover effect among these regions. The highest transition probability appeared in the overlapped region of urban core and Tongzhou district. This observation reflects the impact of urban planning proposal initiated since early 2012. In addition to the policy consequences, we analyzed a variety of spillover “types” through regression analysis. The latter showed that the “ripple” form of spillover is not dominant at the intra-urban level. Other types, such as the spillover due to the existence of price depressed regions, play major roles. This observation reveals the complexity of intra-urban spillover dynamics and its distinct driving-force compared to the inter-urban spillover. Full article

Comprehensive user evaluations of outdoor augmented reality (AR) applications in the architecture, engineering, construction and facilities management (AEC/FM) industry are rarely reported in the literature. This paper presents an AR prototype system for infrared thermographic façade inspection and its evaluation. The system employs markerless tracking based on image registration using natural features and a third person perspective (TPP) augmented view displayed on a hand-held smart device. We focus on evaluating the system in user experiments with the task of designating positions of heat spots on an actual façade as if acquired through thermographic inspection. User and system performance were both assessed with respect to target designation errors. The main findings of this study show that positioning accuracy using this system is adequate for objects of the size of one decimeter. After ruling out the system inherent errors, which mainly stem from our application-specific image registration procedure, we find that errors due to a human’s limited visual-motoric and cognitive performance, which have a more general implication for using TPP AR for target designation, are only a few centimeters. Full article

The U.S. electric-power infrastructure urgently needs renovation. Recent major power outages in California, New York, Texas, and Florida have highlighted U.S. electric-power unreliability. The media have discussed the U.S. aging power infrastructure and the Public Utilities Commission has demanded a comprehensive review of the causes of recent power outages. This paper explores geographic information systems (GIS) and a spatially enhanced predictive power-outage model to address: How may spatial analytics enhance our understanding of power outages? To answer this research question, we developed a spatial analysis framework that utilities can use to investigate power-failure events and their causes. Analysis revealed areas of statistically significant power outages due to multiple causes. This study’s GIS model can help to advance smart-grid reliability by, for example, elucidating power-failure root causes, defining a data-responsive blackout solution, or implementing a continuous monitoring and management solution. We unveil a novel use of spatial analytics to enhance power-outage understanding. Future work may involve connecting to virtually any type of streaming-data feed and transforming GIS applications into frontline decision applications, showing power-outage incidents as they occur. GIS can be a major resource for electronic-inspection systems to lower the duration of customer outages, improve crew response time, as well as reduce labor and overtime costs. Full article

When the occupant density of buildings is large enough, evacuees are prone to congestion during emergency evacuation, which leads to the extension of the overall escape time. Especially for multi-exit buildings, it’s a challenging problem to afford an effective evacuation plan. In this paper, a novel evacuation planning algorithm applied to multi-exit buildings is proposed, which is based on an indoor route network model. Firstly, evacuees are grouped by their location proximity, then all groups are approximately equally classified into several evacuation zones, each of which has only one safe exit. After that, all evacuation groups in the same zone are sorted by their shortest path length, then the time window of each evacuation group occupying the safe exit is calculated in turn. In the case of congestion at the safe exit, the departure time of each evacuation group is delayed in its arrival order. The objectives of the proposed algorithm include minimizing the total evacuation time of all evacuees, the travel time of each evacuee, avoiding traffic congestion, balancing traffic loads among different exits, and achieving high computational efficiency. Case studies are conducted to examine the performance of our algorithm. The influences of group number, group size, evacuation speed on the total evacuation time are discussed on a single-exit network, and that of partitioning methods and evacuation density on the performance and applicability in different congestion levels are also discussed on a multi-exit network. Results demonstrate that our algorithm has a higher efficiency and performs better for evacuations with a large occupant density. Full article

In this research, the concept of livability has been quantitatively and comprehensively reviewed and interpreted to contribute to spatial multi-objective land use optimization modelling. In addition, a multi-objective land use optimization model was constructed using goal programming and a weighted-sum approach, followed by a boundary-based genetic algorithm adapted to help address the spatial multi-objective land use optimization problem. Furthermore, the model is successfully and effectively applied to the case study in the Central Region of Queenstown Planning Area of Singapore towards livability. In the case study, the experiments based on equal weights and experiments based on different weights combination have been successfully conducted, which can demonstrate the effectiveness of the spatial multi-objective land use optimization model developed in this research as well as the robustness and reliability of computer-generated solutions. In addition, the comparison between the computer-generated solutions and the two real planned scenarios has also clearly demonstrated that our generated solutions are much better in terms of fitness values. Lastly, the limitation and future direction of this research have been discussed. Full article

Generalization of geographic information enables cognition and understanding not only of objects and phenomena located in space but also the relations and processes between them. The automation of this process requires formalization of cartographic knowledge, including information on the spatial context of objects. However, the question remains which information is crucial to the decisions regarding the generalization (in this paper: selection) of objects. The article presents and compares the usability of three methods based on rough set theories (rough set theory, dominance-based rough set theory, fuzzy rough set theory) that facilitate the designation of the attributes relevant to a decision. The methods are using different types (levels of measurements) of attributes. The author determines reducts and their cores (common elements) that show the relevance of attributes stemming from the spatial context. The fuzzy rough set theory method proved the least useful, whereas the rough set theory and dominance-based rough set theory methods seem to be recommendable (depending on the governing level of measurement). Full article

Several areas of Earth that are rich in oil and natural gas also have huge deposits of salt below the surface. Because of this connection, knowing precise locations of large salt deposits is extremely important to companies involved in oil and gas exploration. To locate salt bodies, professional seismic imaging is needed. These images are analyzed by human experts which leads to very subjective and highly variable renderings. To motivate automation and increase the accuracy of this process, TGS-NOPEC Geophysical Company (TGS) has sponsored a Kaggle competition that was held in the second half of 2018. The competition was very popular, gathering 3221 individuals and teams. Data for the competition included a training set of 4000 seismic image patches and corresponding segmentation masks. The test set contained 18,000 seismic image patches used for evaluation (all images are 101 × 101 pixels). Depth information of the sample location was also provided for every seismic image patch. The method presented in this paper is based on the author’s participation and it relies on training a deep convolutional neural network (CNN) for semantic segmentation. The architecture of the proposed network is inspired by the U-Net model in combination with ResNet and DenseNet architectures. To better comprehend the properties of the proposed architecture, a series of experiments were conducted applying standardized approaches using the same training framework. The results showed that the proposed architecture is comparable and, in most cases, better than these segmentation models. Full article

Extracting information related to weather and visual conditions at a given time and space is indispensable for scene awareness, which strongly impacts our behaviours, from simply walking in a city to riding a bike, driving a car, or autonomous drive-assistance. Despite the significance of this subject, it has still not been fully addressed by the machine intelligence relying on deep learning and computer vision to detect the multi-labels of weather and visual conditions with a unified method that can be easily used in practice. What has been achieved to-date are rather sectorial models that address a limited number of labels that do not cover the wide spectrum of weather and visual conditions. Nonetheless, weather and visual conditions are often addressed individually. In this paper, we introduce a novel framework to automatically extract this information from street-level images relying on deep learning and computer vision using a unified method without any pre-defined constraints in the processed images. A pipeline of four deep convolutional neural network (CNN) models, so-called WeatherNet, is trained, relying on residual learning using ResNet50 architecture, to extract various weather and visual conditions such as dawn/dusk, day and night for time detection, glare for lighting conditions, and clear, rainy, snowy, and foggy for weather conditions. WeatherNet shows strong performance in extracting this information from user-defined images or video streams that can be used but are not limited to autonomous vehicles and drive-assistance systems, tracking behaviours, safety-related research, or even for better understanding cities through images for policy-makers. Full article

Different methods have been proposed to create seismic site condition maps. Ground-based methods are time-consuming in many places and require a lot of manual work. One method suggests topographic data as a proxy for seismic site condition of large areas. In this study, we mainly focused on the use of an ASTER 1c digital elevation model (DEM) to produce Vs30 maps throughout Iran using a GIS-based regression analysis of Vs30 measurements at 514 seismic stations. These maps were found to be comparable with those that were previously created from SRTM 30c data. The Vs30 results from ASTER 1c estimated the higher velocities better than those from SRTM 30c. In addition, a combination of ASTER 1c and SRTM 30c amplification maps can be useful for the detection of geological and geomorphological units. We also classified the terrain surface of six seismotectonic regions in Iran into 16 classes, considering three important criteria (slope, convexity and texture) to extract more information about the location and morphological characteristics of the stations. The results show that 98% of the stations are situated in six classes, 30% of which are in class 12, 27% in class 6, 17% in class 9, 16% in class 3, 4% in class 3and the rest of the stations are located in other classes. Full article

Accurate watershed delineation is a precondition for runoff and water quality simulation. Traditional digital elevation model (DEM) may not generate realistic drainage networks due to large depressions and subtle elevation differences in local-scale plains. In this study, we propose a new method for solving the problem of watershed delineation, using the Taihu Basin as a case study. Rivers, lakes, and reservoirs were obtained from Sentinel-2A images with the Canny algorithm on Google Earth Engine (GEE), rather than from DEM, to compose the drainage network. Catchments were delineated by modifying the flow direction of rivers, lakes, reservoirs, and overland flow, instead of using DEM values. A watershed was divided into the following three types: Lake, reservoir, and overland catchment. A total of 2291 river segments, seven lakes, eight reservoirs, and 2306 subwatersheds were retained in this study. Compared with results from HydroSHEDS and Arc Hydro, the proposed method retains crisscross structures in the topology and prevented erroneous streamlines in large lakes. High-resolution Sentinel-2A images available on the GEE have relatively greater merits than DEMs for precisely representing drainage networks and catchments, especially in the plains area. Because of the higher accuracy, this method can be used as a new solution for watershed division in the plains area. Full article

Dynamic visual simulation of flood risk is crucial for scientific and intelligent emergency management of flood disasters, in which data quality, availability, visualization, and interoperability are important. Here, a seamless integration of a spatio-temporal Geographic Information System (GIS) with one-dimensional (1D) and two-dimensional (2D) hydrodynamic models is achieved for data flow, calculation processes, operation flow, and system functions. Oblique photography-based three-dimensional (3D) modeling technology is used to quickly build a 3D model of the study area (including the hydraulic engineering facilities). A multisource spatio-temporal data platform for dynamically simulating flood risk was built based on the digital earth platform. Using the spatio-temporal computation framework, a dynamic visual simulation and decision support system for flood risk management was developed for the Xiashan Reservoir. The integration method proposed here was verified using flood simulation calculations, dynamic visual simulations, and downstream river channel and dam-break flood simulations. The results show that the proposed methods greatly improve the efficiency of flood risk simulation and decision support. The methods and system put forward in this study can be applied to flood risk simulations and practical management. Full article

To investigate the association between physical activity (including active travel modes) and environmental factors, much research has estimated contextual influences based on zones or areas delineated with buffer analysis. However, few studies to date have examined the effects of different buffer sizes on estimates of individuals’ dynamic exposures along their daily trips recorded as GPS trajectories. Thus, using a 7-day GPS dataset collected in the Chicago Regional Household Travel Inventory (CRHTI) Survey, this study addresses the methodological issue of how the associations between environmental contexts and active travel modes (ATMs) as a subset of physical activity vary with GPS-based buffer size. The results indicate that buffer size influences such associations and the significance levels of the seven environmental factors selected as predictors. Further, the findings on the effects of buffer size on such associations and the significance levels are clearly different between the ATMs of walking and biking. Such evidence of the existence of buffer-size effects for multiple environmental factors not only confirms the importance of the uncertain geographic context problem (UGCoP) but provides a resounding cautionary note to all future research on human mobility involving individuals’ GPS trajectories, including studies on physical activity and travel behaviors, especially on the reliable estimation of individual exposures to environmental factors and their health outcomes. Full article

We contribute a system design and a generalized formal methodology to segment tourists based on their geolocated blogging behaviour according to their interests in identified tourist hotspots. Thus, it is possible to identify and target groups that are possibly interested in alternative destinations to relieve overtourism. A pilot application in a case study of Chinese travel in Switzerland by analysing Qyer travel blog data demonstrates the potential of our method. Accordingly, we contribute four conclusions supported by empirical data. First, our method can enable discovery of plausible geographical distributions of tourist hotspots, which validates the plausibility of the data and its collection. Second, our method discovered statistically significant stochastic dependencies that meaningfully differentiate the observed user base, which demonstrates its value for segmentation. Furthermore, the case study contributes two practical insights for tourism management. Third, Chinese independent travellers, which are the main target group of Qyer, are mainly interested in the discovered travel hotspots, similar to tourists on packaged tours, but also show interest in alternative places. Fourth, the proposed user segmentation revealed two clusters based on users’ social media activity level. For tourism research, users within the second cluster are of interest, which are defined by two segmentation attributes: they blogged about more than just one location, and they have followers. These tourists are significantly more likely to be interested in alternative destinations out of the hotspot axis. Knowing this can help define a target group for marketing activities to promote alternative destinations. Full article

Disaster-originated placename is a kind of disaster subculture that is used for a practical purpose of identifying a location while reminding the past disaster experience. They are expected to transmit the risks and knowledge of high-risk low-frequency natural hazards, surviving over time and generations. This paper compares the perceptions to tsunami-originated placenames in local communities having realistic and exaggerated origins in Sanriku Coast, Japan. The reality of tsunami-originated placenames is first assessed by comparing the tsunami run-ups indicated in the origins and that of the tsunami in the Great East Japan Earthquake 2011 using GIS and digital elevation model. Considerable proportions of placenames had exaggerated origins, but the group interviews to local communities revealed that origins indicating unrealistic tsunami run-ups were more believed than that of the more realistic ones. We discuss that accurate hazard information will be discredited if it contradicts to the people’s everyday life and the desire for safety, and even imprecise and ambiguous information can survive if it is embedded to a system of local knowledge that consistently explains the various facts in a local area that requires explanation. Full article

In this paper, we propose a method to visualize large-scale colliding point clouds by highlighting their collision areas, and apply the method to visualization of collision simulation. Our method uses our recent work that achieved precise three-dimensional see-through imaging, i.e., transparent visualization, of large-scale point clouds that were acquired via laser scanning of three-dimensional objects. We apply the proposed collision visualization method to two applications: (1) The revival of the festival float procession of the Gion Festival, Kyoto city, Japan. The city government plans to revive the original procession route, which is narrow and not used at present. For the revival, it is important to know whether the festival floats would collide with houses, billboards, electric wires, or other objects along the original route. (2) Plant simulations based on laser-scanned datasets of existing and new facilities. The advantageous features of our method are the following: (1) A transparent visualization with a correct depth feel that is helpful to robustly determine the collision areas; (2) the ability to visualize high collision risk areas and real collision areas; and (3) the ability to highlight target visualized areas by increasing the corresponding point densities. Full article

This paper analyzes the spatial distribution and socioeconomic determinants of social media utilization in 3109 counties of the United States. A theory of determinants was modified from the spatially aware technology utilization model (SATUM). Socioeconomic factors including demography, economy, education, innovation, and social capital were posited to influence social media utilization dependent variables. Spatial analysis was conducted including exploratory analysis of geographic distribution and confirmatory screening for spatial randomness. The determinants were identified through ordinary least squares (OLS) regression analysis. Findings for the nation indicate that the major determinants are demographic factors, service occupations, ethnicities, and urban location. Furthermore, analysis was conducted for the U.S. metropolitan, micropolitan, and rural subsamples. We found that Twitter users were more heavily concentrated in southern California and had a strong presence in the Mississippi region, while Facebook users were highly concentrated in Colorado, Utah, and adjacent Rocky Mountain States. Social media usage was lowest in the Great Plains, lower Midwest, and South with the exceptions of Florida and major southern cities such as Atlanta. Measurements of the overall extent of spatial agglomeration were very high. The paper concludes by discussing the policy implications of the study at the county as well as national levels. Full article

Remote sensing image captioning involves remote sensing objects and their spatial relationships. However, it is still difficult to determine the spatial extent of a remote sensing object and the size of a sample patch. If the patch size is too large, it will include too many remote sensing objects and their complex spatial relationships. This will increase the computational burden of the image captioning network and reduce its precision. If the patch size is too small, it often fails to provide enough environmental and contextual information, which makes the remote sensing object difficult to describe. To address this problem, we propose a multi-scale semantic long short-term memory network (MS-LSTM). The remote sensing images are paired into image patches with different spatial scales. First, the large-scale patches have larger sizes. We use a Visual Geometry Group (VGG) network to extract the features from the large-scale patches and input them into the improved MS-LSTM network as the semantic information, which provides a larger receptive field and more contextual semantic information for small-scale image caption so as to play the role of global perspective, thereby enabling the accurate identification of small-scale samples with the same features. Second, a small-scale patch is used to highlight remote sensing objects and simplify their spatial relations. In addition, the multi-receptive field provides perspectives from local to global. The experimental results demonstrated that compared with the original long short-term memory network (LSTM), the MS-LSTM’s Bilingual Evaluation Understudy (BLEU) has been increased by 5.6% to 0.859, thereby reflecting that the MS-LSTM has a more comprehensive receptive field, which provides more abundant semantic information and enhances the remote sensing image captions. Full article

In this paper, we analyse spatial variation in the Japanese dialectal lexicon by assembling a set of methodologies using theories in variationist linguistics and GIScience, and tools used in historical GIS. Based on historical dialect atlas data, we calculate a linguistic distance matrix across survey localities. The linguistic variation expressed through this distance is contrasted with several measurements, based on spatial distance, utilised to estimate language contact potential across Japan, historically and at present. Further, administrative boundaries are tested for their separation effect. Measuring aggregate associations within linguistic variation can contrast previous notions of dialect area formation by detecting continua. Depending on local geographies in spatial subsets, great circle distance, travel distance and travel times explain a similar proportion of the variance in linguistic distance despite the limitations of the latter two. While they explain the majority, two further measurements estimating contact have lower explanatory power: least cost paths, modelling contact before the industrial revolution, based on DEM and sea navigation, and a linguistic influence index based on settlement hierarchy. Historical domain boundaries and present day prefecture boundaries are found to have a statistically significant effect on dialectal variation. However, the interplay of boundaries and distance is yet to be identified. We claim that a similar methodology can address spatial variation in other digital humanities, given a similar spatial and attribute granularity. Full article

This paper sheds light on the residences of white-collar workers in Tokyo and Osaka, Japan in the modernizing period using historical statistical data and telephone directories from a historical geographic information system (GIS) analysis. We examined the differences between the distribution of white-collar workers and the progress of suburbanization by comparing the respective unemployment censuses and telephone directories of Tokyo and Osaka. The analysis shows that in 1925, there was a tendency for many white-collar workers to live in certain city sectors, as well as in the city center. However, this trend had changed by the mid-1930s, when data show that private-sector white-collar workers tended to live more in areas with a relatively low population density. Compared to Osaka, Tokyo was relatively suburbanized with white-collar workers in private companies. Full article

Conventional Geographical Information Systems (GIS) software struggles to represent uncertain and contested historical knowledge. An ontology, meaning a semantic structure defining named entities, and explicit and typed relationships, can be constructed in the absence of locational data, and spatial objects can be attached to this structure if and when they become available. We describe the overall architecture of the Great Britain Historical GIS, and the PastPlace Administrative Unit Ontology that forms its core. Then, we show how particular historical geographies can be represented within this architecture through two case studies, both emphasizing entity definition and especially the application of a multi-level typology, in which each “unit” has an unchanging “type” but also a time-variant “status”. The first includes the linked systems of Poor Law unions and registration districts in 19th century England and Wales, in which most but not all unions and districts were coterminous. The second case study includes the international system of nation-states, in which most units do not appear from nothing, but rather gain or lose independence. We show that a relatively simple data model is able to represent much historical complexity. Full article

The prediction of landslides and other events associated with slope movement is a very serious issue in many national parks around the world. This article deals with the territory of the Malá Studená Dolina (Little Cold Valley, High Tatras National Park—Slovakia), where there are extensive talus cones, through which seasonally heavy hiking trails lead. In the last few years particularly, there have been frequent falls and landslides in the mountainous environment, which also caused several fatal injuries in 2018. For the above reasons, efforts are being made to develop a methodology for monitoring the changes of the talus cones in this specific alpine area, to determine the size, speed, and character of the morphological changes of the soil. Non-contact methods of mass data collection (laser scanning with Leica P40 and aerial photogrammetry with unmanned aerial system (UAS) DJI Phantom 4 Pro) have been used. The results of these measurements were compared and the overall suitability of both methods for measurement in such terrain evaluated. The standard deviation of the difference of surface determination (represented by the point cloud) is about 0.03 m. As such accuracy is sufficient for the purpose of monitoring talus cones and the use of UAS is easier and associated with lower risk of damage of expensive equipment, we conclude that this method is more suitable for mapping and for repeated monitoring of such terrain. The properties of the outputs of the individual measurement methods, the degree of measurement difficulty and specific measurement conditions in the mountainous terrain, as well as the economy of the individual methods, are discussed in detail. Full article

Thailand is not known to be an earthquake-prone country; however, in 2014, an unexpected moderate earthquake caused severe damage to infrastructure and resulted in public panic. This event caught public attention and raised awareness of national seismic disaster management. However, the expertise and primary data required for implementation of seismic disaster management are insufficient, including data on soil character which are used in amplification analyses for further ground motion prediction evaluations. Therefore, in this study, soil characterization was performed to understand the seismic responses of soil rigidity. The final output is presented in a seismic microzoning map. A geomorphology map was selected as the base map for the analysis. The geomorphology units were assigned with a time-averaged shear wave velocity of 30 m (V_S30), which was collected by the spatial autocorrelation (SPAC) method of microtremor array measurements. The V_S30 values were obtained from the phase velocity of the Rayleigh wave corresponding to a 40 m wavelength (C(40)). From the point feature, the V_S30 values were transformed into polygonal features based on the geomorphological characteristics. Additionally, the automated geomorphology classification was explored in this study. Then, the seismic microzones were compared with the locations of major damage from the 2014 records for validation. The results from this study include geomorphological classification and seismic microzoning. The results suggest that the geomorphology units obtained from a pixel-based classification can be recommended for use in seismic microzoning. For seismic microzoning, the results show mainly stiff soil and soft rocks in the study area, and these geomorphological units have relatively high amplifications. The results of this study provide a valuable base map for further disaster management analyses. Full article

In order to estimate the seismic vulnerability of a densely populated urban area, it would in principle be necessary to evaluate the dynamic behaviour of individual and aggregate buildings. These detailed seismic analyses, however, are extremely cost-intensive and require great processing time and expertise judgment. The aim of the present study is to propose a new methodology able to combine information and tools coming from different scientific fields in order to reproduce the effects of a seismic input in urban areas with known geological features and to estimate the entity of the damages caused on existing buildings. In particular, we present a new software called ABES (Agent-Based Earthquake Simulator), based on a Self-Organized Criticality framework, which allows to evaluate the effects of a sequence of seismic events on a certain large urban area during a given interval of time. The integration of Geographic Information System (GIS) data sets, concerning both geological and urban information about the territory of Avola (Italy), allows performing a parametric study of these effects on a real context as a case study. The proposed new approach could be very useful in estimating the seismic vulnerability and defining planning strategies for seismic risk reduction in large urban areas Full article

Speed detection of a moving object using an optical camera has always been an important subject to study in computer vision. This is one of the key components to address in many application areas, such as transportation systems, military and naval applications, and robotics. In this study, we implemented a speed detection system for multiple moving objects on the ground from a moving platform in the air. A detect-and-track approach is used for primary tracking of the objects. Faster R-CNN (region-based convolutional neural network) is applied to detect the objects, and a discriminative correlation filter with CSRT (channel and spatial reliability tracking) is used for tracking. Feature-based image alignment (FBIA) is done for each frame to get the proper object location. In addition, SSIM (structural similarity index measurement) is performed to check how similar the current frame is with respect to the object detection frame. This measurement is necessary because the platform is moving, and new objects may be captured in a new frame. We achieved a speed accuracy of 96.80% with our framework with respect to the real speed of the objects. Full article

Social media data have been used to improve geographic situation awareness in the past decade. Although they have free and openly availability advantages, only a small proportion is related to situation awareness, and reliability or trustworthiness is a challenge. A credibility framework is proposed for Twitter data in the context of disaster situation awareness. The framework is derived from crowdsourcing, which states that errors propagated in volunteered information decrease as the number of contributors increases. In the proposed framework, credibility is hierarchically assessed on two tweet levels. The framework was tested using Hurricane Harvey Twitter data, in which situation awareness related tweets were extracted using a set of predefined keywords including power, shelter, damage, casualty, and flood. For each tweet, text messages and associated URLs were integrated to enhance the information completeness. Events were identified by aggregating tweets based on their topics and spatiotemporal characteristics. Credibility for events was calculated and analyzed against the spatial, temporal, and social impacting scales. This framework has the potential to calculate the evolving credibility in real time, providing users insight on the most important and trustworthy events. Full article

Forest canopy height plays an important role in forest management and ecosystem modeling. There are a variety of techniques employed to map forest height using remote sensing data but it is still necessary to explore the use of new data and methods. In this study, we demonstrate an approach for mapping canopy heights of poplar plantations in plain areas through a combination of stereo and multispectral data from China’s latest civilian stereo mapping satellite ZY3-02. First, a digital surface model (DSM) was extracted using photogrammetry methods. Then, canopy samples and ground samples were selected through manual interpretation. Canopy height samples were obtained by calculating the DSM elevation differences between the canopy samples and ground samples. A regression model was used to correlate the reflectance of a ZY3-02 multispectral image with the canopy height samples, in which the red band and green band reflectance were selected as predictors. Finally, the model was extrapolated to the entire study area and a wall-to-wall forest canopy height map was obtained. The validation of the predicted canopy height map reported a coefficient of determination (R²) of 0.72 and a root mean square error (RMSE) of 1.58 m. This study demonstrates the capacity of ZY3-02 data for mapping the canopy height of pure plantations in plain areas. Full article

The Canadian Hydrographic Service (CHS) publishes nautical charts covering all Canadian waters. Through projects with the Canadian Space Agency, CHS has been investigating remote sensing techniques to support hydrographic applications. One challenge CHS has encountered relates to quantifying its confidence in remote sensing products. This is particularly challenging with Satellite-Derived Bathymetry (SDB) where minimal in situ data may be present for validation. This paper proposes a level of confidence approach where a minimum number of SDB techniques are required to agree within a defined level to allow SDB estimates to be retained. The approach was applied to a Canadian Arctic site, incorporating four techniques: empirical, classification and photogrammetric (automatic and manual). Based on International Hydrographic Organization (IHO) guidelines, each individual approach provided results meeting the CATegory of Zones Of Confidence (CATZOC) level C requirement. By applying the level of confidence approach, where technique combinations agreed within 1 m (e.g., all agree, three agree, two agree) large portions of the extracted bathymetry could now meet the CATZOC A2/B requirement. Areas where at least three approaches agreed have an accuracy of 1.2 m and represent 81% of the total surface. The proposed technique not only increases overall accuracy but also removes some of the uncertainty associated with SDB, particularly for locations where in situ validation data is not available. This approach could provide an option for hydrographic offices to increase their confidence in SDB, potentially allowing for increased SDB use within hydrographic products. Full article

This paper synthesizes vulnerability, risk, resilience, and sustainability (VRRS) in a way that can be used for decision evaluations about sustainable systems, whether such systems are called coupled natural–human systems, social–ecological systems, coupled human–environment systems, and/or hazards influencing global environmental change, all considered geospatial open systems. Evaluations of V-R-R-S as separate concepts for complex decision problems are important, but more insightful when synthesized for improving integrated decision priorities based on trade-offs of V-R-R-S objectives. A synthesis concept, called VRRSability, provides an overarching perspective that elucidates Tier 2 of a previously developed four-tier framework for organizing measurement-informed ontology and epistemology for sustainability information representation (MOESIR). The new synthesis deepens the MOESIR framework to address VRRSability information representation and clarifies the Tier 2 layer of abstraction. This VRRSability synthesis, composed of 13 components (several with sub-components), offers a controlled vocabulary as the basis of a conceptual framework for organizing workflow assessment and intervention strategies as part of geoinformation decision support software. Researchers, practitioners, and machine learning algorithms can use the vocabulary results for characterizing functional performance relationships between elements of geospatial open systems and the computing technology systems used for evaluating them within a context of complex sustainable systems. Full article

Human activities and climate change constitute the contemporary catalyst for natural processes and their impacts, i.e., geo-environmental hazards. Globally, natural catastrophic phenomena and hazards, such as drought, soil erosion, quantitative and qualitative degradation of groundwater, frost, flooding, sea level rise, etc., are intensified by anthropogenic factors. Thus, they present rapid increase in intensity, frequency of occurrence, spatial density, and significant spread of the areas of occurrence. The impact of these phenomena is devastating to human life and to global economies, private holdings, infrastructure, etc., while in a wider context it has a very negative effect on the social, environmental, and economic status of the affected region. Geospatial technologies including Geographic Information Systems, Remote Sensing—Earth Observation as well as related spatial data analysis tools, models, databases, contribute nowadays significantly in predicting, preventing, researching, addressing, rehabilitating, and managing these phenomena and their effects. This review attempts to mark the most devastating geo-hazards from the view of environmental monitoring, covering the state of the art in the use of geospatial technologies in that respect. It also defines the main challenge of this new era which is nothing more than the fictitious exploitation of the information produced by the environmental monitoring so that the necessary policies are taken in the direction of a sustainable future. The review highlights the potential and increasing added value of geographic information as a means to support environmental monitoring in the face of climate change. The growth in geographic information seems to be rapidly accelerated due to the technological and scientific developments that will continue with exponential progress in the years to come. Nonetheless, as it is also highlighted in this review continuous monitoring of the environment is subject to an interdisciplinary approach and contains an amount of actions that cover both the development of natural phenomena and their catastrophic effects mostly due to climate change. Full article

Cities are moving towards new mobility strategies to tackle smart cities’ challenges such as carbon emission reduction, urban transport multimodality and mitigation of pandemic hazards, emphasising on the implementation of shared modes, such as bike-sharing systems. This paper poses a research question and introduces a corresponding systematic literature review, focusing on machine learning techniques’ contributions applied to bike-sharing systems to improve cities’ mobility. The preferred reporting items for systematic reviews and meta-analyses (PRISMA) method was adopted to identify specific factors that influence bike-sharing systems, resulting in an analysis of 35 papers published between 2015 and 2019, creating an outline for future research. By means of systematic literature review and bibliometric analysis, machine learning algorithms were identified in two groups: classification and prediction. Full article

The field of geographic information science has grown exponentially over the last few decades and, particularly within the context of the pervasiveness of the internet, bears witness to a rapid transition of its associated technologies from stand-alone systems to increasingly networked and distributed systems as geospatial information becomes increasingly available online. With its long-standing history for innovation, the field has adopted many disruptive technologies from the fields of computer and information sciences through this transition towards web geographic information systems (GIS); most interestingly in the context of this research is the limited uptake of semantic web technologies by the field and its associated technologies, the lack of which has resulted in a technological disjoint between these fields. As the field seeks to make geospatial information more accessible to more users and in more contexts through ‘self-service’ applications, the use of these technologies is imperative to support the interoperability between distributed data sources. This paper aims to provide insight into what linked data tooling already exists, and based on the features of these, what may be possible for the achievement of self-service GIS. Findings include what visualisation, interactivity, analytics and usability features could be included in the realisation of self-service GIS, pointing to the opportunities that exist in bringing GIS technologies closer to the user. Full article

In recent years, with the growing accessibility of abundant contextual emotion information, which is benefited by the numerous georeferenced user-generated content and the maturity of artificial intelligence (AI)-based emotional computing technics, the emotion layer of human–environment relationship is proposed for enriching traditional methods of various related disciplines such as urban planning. This paper proposes the geographic information system (GIS)-based emotional computing concept, which is a novel framework for applying GIS methods to collective human emotion. The methodology presented in this paper consists of three key steps: (1) collecting georeferenced data containing emotion and environment information such as social media and official sites, (2) detecting emotions using AI-based emotional computing technics such as natural language processing (NLP) and computer vision (CV), and (3) visualizing and analyzing the spatiotemporal patterns with GIS tools. This methodology is a great synergy of multidisciplinary cutting-edge techniques, such as GIScience, sociology, and computer science. Moreover, it can effectively and deeply explore the connection between people and their surroundings with the help of GIS methods. Generally, the framework provides a standard workflow to calculate and analyze the new information layer for researchers, in which a measured human-centric perspective onto the environment is possible. Full article

Introduction: For the past 2400 years, the spatial relationship between health and location has been a concern for researchers. Studies have been conducted for decades to understand such a relationship, which has led to the identification of a number of healthcare planning issues. Geographic Information Systems (GIS) technology has contributed to addressing such issues by applying analytical approaches at the level of epidemiological surveillance and evaluating the spatial inequality of access to healthcare. Consequently, the importance of reviewing healthcare planning issues and recognition of the role of GIS are integral to relevant studies. Such research will contribute to increasing the understanding of how to apply analytical approaches for dealing with healthcare planning issues using GIS. Methods: This paper aims to provide an examination of healthcare planning issues and focuses on reviewing the potential of GIS in dealing with such issues by applying analytical approaches. The method of a typical literature review was used through collecting data from various studies selected based on temporal and descriptive considerations. Results: Researchers have focused on developing and applying analytical approaches using GIS to support two important aspects of healthcare planning: first, epidemic surveillance and modeling, despite a lack of health information and its management, and, second, evaluating the spatial inequality of access to healthcare in order to determine the optimum distribution of health resources. Conclusion: GIS is an effective tool to support spatial decision-making in public health through applying the evolving analytical approaches to dealing with healthcare planning issues. This requires a literature review before preparing relevant studies, particularly because of the continuous development of GIS technologies. Full article

Geospatial information has been indispensable for many application fields, including traffic planning, urban planning, and energy management. Geospatial data are mainly stored in relational databases that have been developed over several decades, and most geographic information applications are desktop applications. With the arrival of big data, geospatial information applications are also being modified into, e.g., mobile platforms and Geospatial Web Services, which require changeable data schemas, faster query response times, and more flexible scalability than traditional spatial relational databases currently have. To respond to these new requirements, NoSQL (Not only SQL) databases are now being adopted for geospatial data storage, management, and queries. This paper reviews state-of-the-art geospatial data processing in the 10 most popular NoSQL databases. We summarize the supported geometry objects, main geometry functions, spatial indexes, query languages, and data formats of these 10 NoSQL databases. Moreover, the pros and cons of these NoSQL databases are analyzed in terms of geospatial data processing. A literature review and analysis showed that current document databases may be more suitable for massive geospatial data processing than are other NoSQL databases due to their comprehensive support for geometry objects and data formats and their performance, geospatial functions, index methods, and academic development. However, depending on the application scenarios, graph databases, key-value, and wide column databases have their own advantages. Full article

The proliferation of Internet of Things (IoT) systems has received much attention from the research community, and it has brought many innovations to smart cities, particularly through the Internet of Moving Things (IoMT). The dynamic geographic distribution of IoMT devices enables the devices to sense themselves and their surroundings on multiple spatio-temporal scales, interact with each other across a vast geographical area, and perform automated analytical tasks everywhere and anytime. Currently, most of the geospatial applications of IoMT systems are developed for abnormal detection and control monitoring. However, it is expected that, in the near future, optimization and prediction tasks will have a larger impact on the way citizens interact with smart cities. This paper examines the state of the art of IoMT systems and discusses their crucial role in supporting anticipatory learning. The maximum potential of IoMT systems in future smart cities can be fully exploited in terms of proactive decision making and decision delivery via an anticipatory action/feedback loop. We also examine the challenges and opportunities of anticipatory learning for IoMT systems in contrast to GIS. The holistic overview provided in this paper highlights the guidelines and directions for future research on this emerging topic. Full article

Spatial perception is formed throughout our entire lives. Its quality depends on our individual differences and the characteristics of the environment. A sketch map is one way of visualising an individual’s spatial perception. It can be evaluated like a real map, in terms of its positional accuracy, content frequency and choice of cartographic methods. Moreover, the factors influencing the sketch map and/or its individual parameters can be identified. These factors should be of interest to geographers, cartographers and/or (geography) educators. The aim of this paper is to identify and describe the factors that clearly affect sketch map quality, by conducting a systematic review of 90 empirical studies published since 1960. Results show that most empirical studies focus on individual differences more than on environmental characteristics or information sources, even though the importance of these overlooked factors, especially source map characteristics and geographical education, has been proven in most analysed studies. Therefore, further research is needed in the field of sketch map quality parameters, especially in the use of cartographic methods. This paper could serve as a framework for such research. Full article

The present paper provides a review of two research topics that are central to geospatial semantics: information modeling and elicitation. The first topic deals with the development of ontologies at different levels of generality and formality, tailored to various needs and uses. The second topic involves a set of processes that aim to draw out latent knowledge from unstructured or semi-structured content: semantic-based extraction, enrichment, search, and analysis. These processes focus on eliciting a structured representation of information in various forms such as: semantic metadata, links to ontology concepts, a collection of topics, etc. The paper reviews the progress made over the last five years in these two very active areas of research. It discusses the problems and the challenges faced, highlights the types of semantic information formalized and extracted, as well as the methodologies and tools used, and identifies directions for future research. Full article

All over the world, organizations are increasingly considering the adoption of open source software and open data. In the geospatial domain, this is no different, and the last few decades have seen significant advances in this regard. We review the current state of open source geospatial software, focusing on the Open Source Geospatial Foundation (OSGeo) software ecosystem and its communities, as well as three kinds of open geospatial data (collaboratively contributed, authoritative and scientific). The current state confirms that openness has changed the way in which geospatial data are collected, processed, analyzed, and visualized. A perspective on future developments, informed by responses from professionals in key organizations in the global geospatial community, suggests that open source geospatial software and open geospatial data are likely to have an even more profound impact in the future. Full article

In spatial science and urban applications, “space" is presented by multiple disciplines as a notion referencing our living environment. Space is used as a general term to help understand particular characteristics of the environment. However, the definition and perception of space varies and these variations have to be harmonised. For example, space may have diverse definitions and classification, the same environment may be abstracted/modelled by contradicting notions of space, which can lead to inconsistencies and misunderstandings. In this paper, we seek to investigate and document the state-of-the-art in the research of “space” regarding its definition, classification, modelling and utilization (2D/3D) in spatial sciences and urban applications. We focus on positioning, navigation, building micro-climate and thermal comfort, landscape, urban planning and design, urban heat island, interior design and planning, transportation and intelligent space. We review 147 research papers, technical reports and on-line resources. We compare the presented space concepts with respect to five criteria—classification, boundary, modelling components, use of standards and granularity. The review inventory is intended for both scientists and professionals in the spatial industry, such as companies, national mapping agencies and governments, and aim to provide a reference to better understand and employ the “space” while working across disciplines. Full article

Structural disaster damage detection and characterization is one of the oldest remote sensing challenges, and the utility of virtually every type of active and passive sensor deployed on various air- and spaceborne platforms has been assessed. The proliferation and growing sophistication of unmanned aerial vehicles (UAVs) in recent years has opened up many new opportunities for damage mapping, due to the high spatial resolution, the resulting stereo images and derivatives, and the flexibility of the platform. This study provides a comprehensive review of how UAV-based damage mapping has evolved from providing simple descriptive overviews of a disaster science, to more sophisticated texture and segmentation-based approaches, and finally to studies using advanced deep learning approaches, as well as multi-temporal and multi-perspective imagery to provide comprehensive damage descriptions. The paper further reviews studies on the utility of the developed mapping strategies and image processing pipelines for first responders, focusing especially on outcomes of two recent European research projects, RECONASS (Reconstruction and Recovery Planning: Rapid and Continuously Updated Construction Damage, and Related Needs Assessment) and INACHUS (Technological and Methodological Solutions for Integrated Wide Area Situation Awareness and Survivor Localization to Support Search and Rescue Teams). Finally, recent and emerging developments are reviewed, such as recent improvements in machine learning, increasing mapping autonomy, damage mapping in interior, GPS-denied environments, the utility of UAVs for infrastructure mapping and maintenance, as well as the emergence of UAVs with robotic abilities. Full article

The stability and deformation behavior of high rock slopes depends on many factors, including geological structures, lithology, geomorphic processes, stress distribution, and groundwater regime. A comprehensive mapping program is, therefore, required to investigate and assess the stability of high rock slopes. However, slope steepness, rockfalls and ongoing instability, difficult terrain, and other safety concerns may prevent the collection of data by means of traditional field techniques. Therefore, remote sensing methods are often critical to perform an effective investigation. In this paper, we describe the application of field and remote sensing approaches for the characterization of rock slopes at various scale and distances. Based on over 15 years of the experience gained by the Engineering Geology and Resource Geotechnics Research Group at Simon Fraser University (Vancouver, Canada), we provide a summary of the potential applications, advantages, and limitations of varied remote sensing techniques for comprehensive characterization of rock slopes. We illustrate how remote sensing methods have been critical in performing rock slope investigations. However, we observe that traditional field methods still remain indispensable to collect important intact rock and discontinuity condition data. Full article

The objective of this systematic review was to analyze the recently published literature on the Internet of Robotic Things (IoRT) and integrate the insights it articulates on big data management algorithms, deep learning-based object detection technologies, and geospatial simulation and sensor fusion tools. The research problems were whether computer vision techniques, geospatial data mining, simulation-based digital twins, and real-time monitoring technology optimize remote sensing robots. Preferred Reporting Items for Systematic Reviews and Meta-analysis (PRISMA) guidelines were leveraged by a Shiny app to obtain the flow diagram comprising evidence-based collected and managed data (the search results and screening procedures). Throughout January and July 2022, a quantitative literature review of ProQuest, Scopus, and the Web of Science databases was performed, with search terms comprising “Internet of Robotic Things” + “big data management algorithms”, “deep learning-based object detection technologies”, and “geospatial simulation and sensor fusion tools”. As the analyzed research was published between 2017 and 2022, only 379 sources fulfilled the eligibility standards. A total of 105, chiefly empirical, sources have been selected after removing full-text papers that were out of scope, did not have sufficient details, or had limited rigor For screening and quality evaluation so as to attain sound outcomes and correlations, we deployed AMSTAR (Assessing the Methodological Quality of Systematic Reviews), AXIS (Appraisal tool for Cross-Sectional Studies), MMAT (Mixed Methods Appraisal Tool), and ROBIS (to assess bias risk in systematic reviews). Dimensions was leveraged as regards initial bibliometric mapping (data visualization) and VOSviewer was harnessed in terms of layout algorithms. Full article