Topical Advisory Panel
- Corrosion, Wear and Erosion Section
- Coatings for Food Technology and System Section
- High-Energy Beam Surface Engineering and Coatings Section
- Surface Characterization, Deposition and Modification Section
- Thin Films Section
- Surface Engineering for Energy Harvesting, Conversion, and Storage Section
- Functional Polymer Coatings and Films Section
- Ceramic Coatings and Engineering Technology Section
Members
VTT Technical Research Centre of Finland Ltd., Kivimiehentie 3, P.O. Box 1000, FI-02044 Espoo, Finland
Interests: corrosion; alloys; corrosion testing; corrosion science; corrosion engineering; power plants; mechanical properties; metals
Interests: corrosion; alloys; corrosion testing; corrosion science; corrosion engineering; power plants; mechanical properties; metals
Department Elektrotechnik-Elektronik-Informationstechnik (EEI), Friedrich-Alexander-Universität Erlangen-Nürnberg, 91058 Erlangen, Germany
Interests: oxide electronics; flexible electronics; thin-film transistors (TFT); oxide displays; ferroelectrics; solution processing; atomic layer deposition (ALD); neuromorphic devices
Interests: oxide electronics; flexible electronics; thin-film transistors (TFT); oxide displays; ferroelectrics; solution processing; atomic layer deposition (ALD); neuromorphic devices
Swedish National Road and Transport Research Institute (VTI), SE-58195 Linköping, Sweden
Interests: tire/road noise; friction; rolling resistance and emission of particulates; pavement surface texture
Special Issues, Collections and Topics in MDPI journals
Interests: tire/road noise; friction; rolling resistance and emission of particulates; pavement surface texture
Special Issues, Collections and Topics in MDPI journals
Centro de Investigação de Montanha, Instituto Politecnico de Braganca, Braganca, Portugal
Interests: green chemistry; bio-based materials; renewable entities and additives; natural bioactives; composite materials; polyurethane chemistry; polyurethane dispersions; polymers with tailored properties; industrial applications
Special Issues, Collections and Topics in MDPI journals
Interests: green chemistry; bio-based materials; renewable entities and additives; natural bioactives; composite materials; polyurethane chemistry; polyurethane dispersions; polymers with tailored properties; industrial applications
Special Issues, Collections and Topics in MDPI journals
1. Biomedical Networking Research Center on Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN), Department of Cell Biology, Genetics and Physiology, University of Málaga, Málaga, Spain
2. Instituto de Investigación Biomédica de Málaga (IBIMA), Malaga, Spain
Interests: tissue engineering; biomaterials; stem cells; biomimetic surfaces; material-tissue interface; nanoparticles; drug delivery; bone substitutes; orthopedics; implants; bone pathologies; skeletal dysplasias
2. Instituto de Investigación Biomédica de Málaga (IBIMA), Malaga, Spain
Interests: tissue engineering; biomaterials; stem cells; biomimetic surfaces; material-tissue interface; nanoparticles; drug delivery; bone substitutes; orthopedics; implants; bone pathologies; skeletal dysplasias
Department of Materials Science, University of Utah, Salt Lake City, UT-84112, USA
Interests: high-entropy alloys; electrochemistry; dirac materials; semiconductors
Special Issues, Collections and Topics in MDPI journals
Interests: high-entropy alloys; electrochemistry; dirac materials; semiconductors
Special Issues, Collections and Topics in MDPI journals
Mechanical, Automotive & Materials Engineering, University of Windsor, Windsor, ON, Canada
Interests: metal forming; numerical modelling; steel; dual phase steel; TRIP steel; characterization; simulation; damage; fracture; failure; formability; LS_Dyna; damage model; GTN; Rousselier; JC; finite element
Interests: metal forming; numerical modelling; steel; dual phase steel; TRIP steel; characterization; simulation; damage; fracture; failure; formability; LS_Dyna; damage model; GTN; Rousselier; JC; finite element
College of Biomedical Sciences, Kangwon National University, Chuncheon, Gangwon 24341, Korea
Interests: biocompatible biopolymer; chitosan; nanomaterials; wound dressing; antibiotics; plant metabolites
Interests: biocompatible biopolymer; chitosan; nanomaterials; wound dressing; antibiotics; plant metabolites
Institute of Materials Science and Engineering, Lodz University of Technology, 90-537 Lodz, Poland
Interests: materials engineering; material characterization; surface engineering; coating technology; heat treatment; mechanical properties; aluminum alloys; software engineering; structural engineering; aluminium; friction; root canal; stress analysis; endodontics; mechanical behavior of materials; casting; materials; numerical analysis; additive manufacturing; 3D printing; polymer and metal printing
Special Issues, Collections and Topics in MDPI journals
Interests: materials engineering; material characterization; surface engineering; coating technology; heat treatment; mechanical properties; aluminum alloys; software engineering; structural engineering; aluminium; friction; root canal; stress analysis; endodontics; mechanical behavior of materials; casting; materials; numerical analysis; additive manufacturing; 3D printing; polymer and metal printing
Special Issues, Collections and Topics in MDPI journals
Dipartimento di Chimica and Centro Interdipartimentale NIS (Nanostructured Surfaces and Interfaces), Università degli Studi di Torino, Via P. Giuria 7, 10125 Turin, Italy
Interests: metals and alloys; metallic glasses; nanoporous gold; nanostructured metals; de-alloying; corrosion; electrochemistry; electrocatalysis; water splitting; surface enhanced Raman scattering
Special Issues, Collections and Topics in MDPI journals
Interests: metals and alloys; metallic glasses; nanoporous gold; nanostructured metals; de-alloying; corrosion; electrochemistry; electrocatalysis; water splitting; surface enhanced Raman scattering
Special Issues, Collections and Topics in MDPI journals
Empa Swiss Federal Laboratories for Materials Science and Technology, Überlandstrasse 129, 8600 Dübendorf, Switzerland
Interests: aerogels; acoustic and thermal insulation; nanostructured materials; textile finishing/coating; technical textiles; water hydrophobicity; fire retardancy
Interests: aerogels; acoustic and thermal insulation; nanostructured materials; textile finishing/coating; technical textiles; water hydrophobicity; fire retardancy
Department of Food Engineering, University of Agricultural Sciences and Veterinary Medicine of Cluj-Napoca, 3-5 Calea Mănăştur, 400372 Cluj-Napoca, Romania
Interests: by-product valorisation; food waste upcycling; polymeric film design for active packaging; bioactive compound recovery; dietary supplement development
Special Issues, Collections and Topics in MDPI journals
Interests: by-product valorisation; food waste upcycling; polymeric film design for active packaging; bioactive compound recovery; dietary supplement development
Special Issues, Collections and Topics in MDPI journals
Department of Architecture and Civil Engineering, City University of Hong Kong, Hong Kong, China
Interests: experimental and multi-scale mechanics; geomechanics; tribology and contact mechanics; material characterization, geo-energy and geo-resources; natural, polymer and biopolymer-based coatings; surfaces and interfaces; polymeric-based materials; cementitious materials; impact mechanics
Special Issues, Collections and Topics in MDPI journals
Interests: experimental and multi-scale mechanics; geomechanics; tribology and contact mechanics; material characterization, geo-energy and geo-resources; natural, polymer and biopolymer-based coatings; surfaces and interfaces; polymeric-based materials; cementitious materials; impact mechanics
Special Issues, Collections and Topics in MDPI journals
University POLITEHNICA of Bucharest, Materials Science and Engineering Faculty, Materials Processing and Ecometallurgy Department, 313 Splaiul Independentei, 060042 Bucharest, Romania;
Vice President of the Romanian Forging Association, Head of QForm Software Training Center Romania.
Interests: plastic deformation; forging; extrusion; heat treatments; thermomechanical processing; severe plastic deformation; equal channel angular pressing; Materials synthesis and characterization; metallography; Mechanical Testing; microstructural characterization; fractography; Steels; titanium alloys; aluminum alloys; Magnesium Alloys; biomaterials; Nanostructured Materials; ultrafine-grained materials; metal matrix composites; modeling and simulation; finite element analysis
Vice President of the Romanian Forging Association, Head of QForm Software Training Center Romania.
Interests: plastic deformation; forging; extrusion; heat treatments; thermomechanical processing; severe plastic deformation; equal channel angular pressing; Materials synthesis and characterization; metallography; Mechanical Testing; microstructural characterization; fractography; Steels; titanium alloys; aluminum alloys; Magnesium Alloys; biomaterials; Nanostructured Materials; ultrafine-grained materials; metal matrix composites; modeling and simulation; finite element analysis
Institute of Optical and Electronic Materials, Hamburg University of Technology, 21073 Hamburg, Germany
Interests: photonic crystal; photonic glass; light scattering; Thermal Barrier Coatings; structural coloration; optical filter
Interests: photonic crystal; photonic glass; light scattering; Thermal Barrier Coatings; structural coloration; optical filter
Researcher, Industrial Engineering Department, Satbayev University, Almaty, Kazakhstan
Interests: nanomaterials and nanotechnologies; colloid chemistry; encapsulation; adsorption of polymer-surfactant mixtures at the interfaces; emulsion stabilization; coatings
Interests: nanomaterials and nanotechnologies; colloid chemistry; encapsulation; adsorption of polymer-surfactant mixtures at the interfaces; emulsion stabilization; coatings
Department of Mineral, Metallurgical, and Materials Engineering, Laval University, Quebec, QC G1L 3L5, Canada
Interests: surface science; coating; plasma; materials characterization
Special Issues, Collections and Topics in MDPI journals
Interests: surface science; coating; plasma; materials characterization
Special Issues, Collections and Topics in MDPI journals
School of Materials Science and Engineering, Southeast University, Nanjing 211189, China
Interests: galvanic corrosion; surface morphology; amorphous alloys; argon; niobium oxide; differential scanning calorimetry; mobile phase composition; enthalpy relaxation; corrosion resistance; gradient elution; electron transfer; chromatography
Interests: galvanic corrosion; surface morphology; amorphous alloys; argon; niobium oxide; differential scanning calorimetry; mobile phase composition; enthalpy relaxation; corrosion resistance; gradient elution; electron transfer; chromatography
School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing, China
Interests: anticorrosion coatings of steels at elevated temperature; thermal barrier coatings
Interests: anticorrosion coatings of steels at elevated temperature; thermal barrier coatings
Division of Machine Elements, Luleå University of Technology, Luleå, Sweden
Interests: nanocomposite; lubricant effects; tribochemistry; polymeric; carbon; biodegradability
Special Issues, Collections and Topics in MDPI journals
Interests: nanocomposite; lubricant effects; tribochemistry; polymeric; carbon; biodegradability
Special Issues, Collections and Topics in MDPI journals
Center of advanced lubrication and seal materials, State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi’an 710072, China
Interests: friction and wear of metal materials; mechanical properties of nano materials; mechanisms of boundary lubrication and elastohydrodynamic lubrication; surface and interface science
Interests: friction and wear of metal materials; mechanical properties of nano materials; mechanisms of boundary lubrication and elastohydrodynamic lubrication; surface and interface science
1. College of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China;
2. State Key Laboratory of High Performance Complex Manufacturing, Central South University, Changsha 410083, China;
3. Light Alloy Research Institute, Central South University, Changsha 410083, China
Interests: nano friction lubrication and material processing
2. State Key Laboratory of High Performance Complex Manufacturing, Central South University, Changsha 410083, China;
3. Light Alloy Research Institute, Central South University, Changsha 410083, China
Interests: nano friction lubrication and material processing
School of Materials Science and Engineering, University of Ulsan, 12 Technosaneop-ro 55 beon-gil, Nam-gu, Ulsan, Republic of Korea
Interests: flexible electronics
Special Issues, Collections and Topics in MDPI journals
Interests: flexible electronics
Special Issues, Collections and Topics in MDPI journals
School of Materials Science & Engineering, Beijing Institute of Technology, Beijing, China
Interests: synthesis, characterization and performance of functional organic compounds; construction of molecular laboratory (lab-on-a-molecule) and its application in environmental detection, biological tracing and explosive detection; new conductive fiber composite preparation and application of materials; preparation and application of new heat-resistant broadband microwave absorbers; preparation and application of organic photoelectric materials
Interests: synthesis, characterization and performance of functional organic compounds; construction of molecular laboratory (lab-on-a-molecule) and its application in environmental detection, biological tracing and explosive detection; new conductive fiber composite preparation and application of materials; preparation and application of new heat-resistant broadband microwave absorbers; preparation and application of organic photoelectric materials
Mechanical Engineering Department, Washkewicz College of Engineering, Cleveland State University, Cleveland, OH, USA
Interests: bioceramics; orthopedic implants; antibacterial; additive manufacturing; coatings
Interests: bioceramics; orthopedic implants; antibacterial; additive manufacturing; coatings
Department of Physics, University of Thessaly, 35100 Lamia, Greece
Interests: mode-locked lasers; semiconductor lasers; optical sensors
Special Issues, Collections and Topics in MDPI journals
Interests: mode-locked lasers; semiconductor lasers; optical sensors
Special Issues, Collections and Topics in MDPI journals
Division of Periodontal Diseases and Oral Mucosa Diseases -Department of Conservative Dentistry, School of Medicine with the Division of Dentistry in Zabrze, Medical University of Silesia in Katowice
Interests: Dental materials-microstructure; adhesion; mechanical properties; physical properties; chemical properties; biological properties; the use of high and low power lasers in medicine; photodynamic therapy (PDT); the influence of materials on the condition of the oral cavity
Interests: Dental materials-microstructure; adhesion; mechanical properties; physical properties; chemical properties; biological properties; the use of high and low power lasers in medicine; photodynamic therapy (PDT); the influence of materials on the condition of the oral cavity
National Research Tomsk State University
Interests: 1. Mechanical behaviour of metal alloys, ceramics, polymer materials and composites to dynamic and quasistatic loadings 2. Numerical simulation of deformation and fracture of structurally non-homogeneous materials (metals, alloys, ceramics, rocks), plastic strain localization and pre-fracture processes under dynamic and quasi-static loading. 3. Multiscale simulation of mechanical behaviour of metal alloys, ceramics, polymer materials and composites to dynamic and quasistatic loadings.
Interests: 1. Mechanical behaviour of metal alloys, ceramics, polymer materials and composites to dynamic and quasistatic loadings 2. Numerical simulation of deformation and fracture of structurally non-homogeneous materials (metals, alloys, ceramics, rocks), plastic strain localization and pre-fracture processes under dynamic and quasi-static loading. 3. Multiscale simulation of mechanical behaviour of metal alloys, ceramics, polymer materials and composites to dynamic and quasistatic loadings.
1. Unit of Dental Propedeutics, Department of Conservative Dentistry with Endodontics, Division of Medical Sciences in Zabrze, Medical University of Silesia, 40-055 Katowice, Poland;
2. Vice-Dean Faculty of Medical Sciences in Zabrze, Medical University of Silesia, Katowice, Poland
Interests: microinvasive dentistry; dental infiltrants; restorative dentistry; conservative dentistry and endodontics; dental materials; periodontology and diseases of the oral mucosa
Special Issues, Collections and Topics in MDPI journals
2. Vice-Dean Faculty of Medical Sciences in Zabrze, Medical University of Silesia, Katowice, Poland
Interests: microinvasive dentistry; dental infiltrants; restorative dentistry; conservative dentistry and endodontics; dental materials; periodontology and diseases of the oral mucosa
Special Issues, Collections and Topics in MDPI journals
Tomsk Polytechnic University, 30, Lenin Avenue, 634050 Tomsk, Russia
Interests: steels; alloys; surfacing coating; deposition; high-energy processing
Interests: steels; alloys; surfacing coating; deposition; high-energy processing
