Dr. Ning Cui is an Associate Professor at the School of Mechanical and Automotive Engineering at Qingdao University of Technology. He also serves as a reviewer for journals such as Materials & Design, Journal of Alloys and Compounds, Vacuum, and Materials Characterization. He received his PhD in Materials Processing Engineering from the Harbin Institute of Technology (2016). His teaching disciplines include Mechanical Engineering Materials, Mold Manufacturing Technology, Mold Rapid Prototyping Technology, Advanced Structural Materials, and Metallurgy. He has been engaged in research on composition design, organization regulation, precision hot-forming technology, and the corrosion properties of titanium and titanium–aluminum alloys for a long time.
Dr. Xiaopeng Wang is an Engineer and a Master’s Supervisor at the Center of Analysis and Measurement at Harbin Institute of Technology. He received his BS in Material Forming and Control Engineering (2005) and MSc in Material Processing (2007) from Harbin Institute of Technology. He earned his
PhD in Material Processing jointly trained by the Harbin Institute of Technology and Chonbuk National University, South Korea (2013). He has presided over projects such as 973 Project Sub-Projects, National Natural Science Foundation-Youth Fund, and Key Laboratory Open Projects. His main research
directions include precision hot forming of titanium alloys and TiAl alloys, performance research of high-entropy intermetallic compounds, biomedical titanium alloys, and titanium-based composites.
