Hsin-Jung Lee was born in 1991 in Taipei, Taiwan. She is currently a doctoral candidate at the eBeam Lab, part of the Graduate Institute of Electronics Engineering at National Taiwan University, Taipei, Taiwan. Her pursuit of a Ph.D. in Electronics Engineering is driven by her deep interest in semiconductor technologies and precision engineering. Her research primarily focuses on the development of innovative nanostructures for GaN-based High Electron Mobility Transistors (HEMTs) using electron beam lithography. She is also engaged in enhancing the precision of signal processing in differential equations through the application of dependent bases and employs advanced precision calculation techniques for efficient basis expansion of piecewise continuous signals.

Cheng-Che Lee was born in Taipei, Taiwan. He earned his Ph.D. in Electro-Optical Engineering from National Formosa University in 2022. Currently, he is advancing his research as a Ph.D. candidate at the Graduate Institute of Electronics Engineering at National Taiwan University, where he is also an active member of the eBeam Laboratory. His research is primarily focused on the exploration and development of electron beam lithography technology and its applications in III-V semiconductor electronic and optoelectronic devices. He is also engaged in the study of integrated optics, organic electronic devices, and the enhancement of signal precision in analytical calculations. His work aims to contribute significantly to the fields of microelectronics and photonics, enhancing the functionality and efficiency of next-generation electronic and optoelectronic systems.

Hong-Ru Pan received a B.S. degree from the Department of Management Sciences at the National Yang-Ming Chiao Tung University, Hsinchu, Taiwan, in 2013 and an M.S. degree from the Graduate Institute of Electronics Engineering, National Taiwan University, Taipei, Taiwan, in 2017. His current research interests include the surface nanostructure design of AlGaN/GaN high-electron mobility transistors and e-beam lithography technology.

Chieh-Hsiung Kuan was born in Taipei, Taiwan, in 1962. He received a B.S. degree in electrical engineering from National Taiwan University in 1985, an M. S. A. degree, and a Ph.D. degree in electrical engineering from Princeton University in 1990 and 1994, respectively. During his Ph.D., he majored in the dark current and noise characteristics of infrared hot-electron transistors. He cooperated with the U. S. Army Laboratory at Fort Monmouth in New Jersey. He joined the Department of Electrical Engineering, National Taiwan University in 1994 as an associate professor and was promoted to full professor in 2002. His current research interests include the infrared photodiode for room temperature operation, the quantum well-infrared photodetector and laser, superlattice infrared photodetector and the associated multi-color detector, and the topics on how to measure and suppress the noise in the detectors. He has set up E-beam and high-resolution microscope systems to research advanced lithography technology further. The infrared detector, composed of two superlattices separated by a wide barrier and proposed by Dr. Kuan in 2002, was cited as a newsbreak in the June issue of Laser Focus World. Dr. Kuan is a member of the IEEE Society and Phi-Tau-Phi Honored Scholar Society.