Value Chain Analysis of Rice Industry by Products in a Circular Economy Context: A Review

: The quantity of organic waste generated by agricultural sectors is continually increasing due to population growth and rising food demand. Rice is the primary consumable food in Asia. However, many stakeholders follow a linear economic model such as the “take–make–waste” concept. This linear model leads to a substantial environmental burden and the destruction of valuable resources without gaining their actual value. Because these by-products can be converted into energy generating and storage materials, and into bio-based products by cascading transformation processes within the circular economy concept, waste should be considered a central material. This review examines the composition of rice straw, bran, and husks, and the procedures involved in manufacturing value-added goods, from these wastes. Moreover, starting with an extensive literature analysis on the rice value chains, this work systematizes and displays a variety of strategies for using these by-products. The future development of agricultural waste management is desirable to capitalize on the multi-functional product by circulating all the by-products in the economy. According to the analysis of relevant research, rice straw has considerable potential as a renewable energy source. However, there is a signiﬁcant research gap in using rice bran as an energy storage material. Additionally, modiﬁed rice husk has increased its promise as an adsorbent in the bio-based water treatment industry. Furthermore, the case study of Sri Lanka revealed that developing countries have a huge potential to value these by-products in various sectors of the economy. Finally, this paper provides suggestions for researchers and policymakers to improve the current agriculture waste management system with the best option and integrated approach for economic sustainability and eco-and environmental solution, considering some case studies to develop sustainable waste management processes.


Introduction
Rice is an annual plant crop mainly cultivated in areas with high rainfall and rice is a primary edible food and crop in Asia [1,2]. Many South Asian countries have an agrarian economy and have been producing significant amounts of agricultural waste related to the rice industry. As a food crop, rice ranks first in consumption, second in total output, and third in total cultivation [1]. Most (around 90%) of the world's rice supply is grown in Asia; the world's two major rice producers, China and India, provide more than half of the world's rice supply [1,3]. The world increase in cultivated area from 120 million to 163 million ha (0.5%) each year and the increase in paddy yield from 1.8 to 4.6 t/ha (1.6%) between 1960 and 2018 caused a more than threefold increase in global rice output, from 221 million to 745 million metric tons (2.1% per year) [4] (Figure 1). The Green Revolution dramatically increased rice production, which helped stave off famines, feed millions of However, if wastes are valorized as raw materials to complete parts of equipment through disassembly and remanufacturing, they can create value for entire supply chains, allowing additional markets for used components beyond the raw materials market and developing new specialized professions. These openings are crucial because they establish an indirect market where resources, energy, and components from various waste streams in the rice value chain produce income for the communities [12].
Therefore, the primary purpose of this study is to consider current waste management practices for the main types of waste in the rice industry, namely rice straws, rice bran, and rice husk, including rice husk ash that remains from processes involving energy generation. Additionally, this review presents the strategies and potentialities of these by-products for developing full utilization in the economy. Therefore, the study is focused on the potentiality of all types of products, such as high-value low-volume products, high-volume low-value products, and value-added products ( Figure 2). However, the implementation of these valorization options will be determined by practical feasibility. In addition, these options will be analyzed for compatibility with other factors such as economic feasibility and social acceptance.
Waste 2023, 2, FOR PEER REVIEW 3 However, if wastes are valorized as raw materials to complete parts of equipment through disassembly and remanufacturing, they can create value for entire supply chains, allowing additional markets for used components beyond the raw materials market and developing new specialized professions. These openings are crucial because they establish an indirect market where resources, energy, and components from various waste streams in the rice value chain produce income for the communities [12].
Therefore, the primary purpose of this study is to consider current waste management practices for the main types of waste in the rice industry, namely rice straws, rice bran, and rice husk, including rice husk ash that remains from processes involving energy generation. Additionally, this review presents the strategies and potentialities of these byproducts for developing full utilization in the economy. Therefore, the study is focused on the potentiality of all types of products, such as high-value low-volume products, highvolume low-value products, and value-added products ( Figure 2). However, the implementation of these valorization options will be determined by practical feasibility. In addition, these options will be analyzed for compatibility with other factors such as economic feasibility and social acceptance.

Rice Industry Value Chain
Agricultural food processing consists of a variety of value chains and generates different types of agricultural waste through the value chain from farm to fork [13,14] ( Figure  3). Large quantities of valuable wastes are produced during the harvesting and processing stages, and these wastes should be studied and analyzed to extract their valuable parts sustainably. For example, paddy straws are produced in large quantities during paddy harvesting. These straws are commonly found in the field and are often used as fodder for animals and as bedding for livestock [15]. The remaining part is burned by the farmers when ready for subsequent cultivation. Additionally, rice husk frequently becomes a material for burning and is discarded in landfills [16]. The destruction of this valuable biomass without proper use will cause irreversible damage to the environment and all living beings on the planet. Bran is another by-product of the rice processing value chain ( Figure  3). After harvesting and milling, the by-products of the rice industry can be subjected to industrial symbiosis to exploit their full value [2,13].
Rice farming is integrated with geography, soil type, water availability, harvesting and processing techniques, and market behavior [17,18]. Farmers grow different types of rice in different regions because each grows best in specific soil types and climates. Additionally, access to water and proper irrigation systems boost agricultural production [19,20]. Many small and medium rice farmers still depend on labor [14]. Traditional techniques are slow and dependent on workability and experience. Modern technology and equipment are helpful in rice-producing areas but expensive [13,14,21,22]. Consequently, different production conditions affect the rice industry's waste [21,22]. Therefore, waste calculation should include unused rice and other waste due to harvesting and processing errors [2,13]. Consumer behavior and attitudes will determine how much rice is wasted at the end of the food value chain [23][24][25]. Edible rice wastage is due to bad taste, rotting, and leftovers [23][24][25].

Rice Industry Value Chain
Agricultural food processing consists of a variety of value chains and generates different types of agricultural waste through the value chain from farm to fork [13,14] (Figure 3). Large quantities of valuable wastes are produced during the harvesting and processing stages, and these wastes should be studied and analyzed to extract their valuable parts sustainably. For example, paddy straws are produced in large quantities during paddy harvesting. These straws are commonly found in the field and are often used as fodder for animals and as bedding for livestock [15]. The remaining part is burned by the farmers when ready for subsequent cultivation. Additionally, rice husk frequently becomes a material for burning and is discarded in landfills [16]. The destruction of this valuable biomass without proper use will cause irreversible damage to the environment and all living beings on the planet. Bran is another by-product of the rice processing value chain ( Figure 3). After harvesting and milling, the by-products of the rice industry can be subjected to industrial symbiosis to exploit their full value [2,13].
Rice farming is integrated with geography, soil type, water availability, harvesting and processing techniques, and market behavior [17,18]. Farmers grow different types of rice in different regions because each grows best in specific soil types and climates. Additionally, access to water and proper irrigation systems boost agricultural production [19,20]. Many small and medium rice farmers still depend on labor [14]. Traditional techniques are slow and dependent on workability and experience. Modern technology and equipment are helpful in rice-producing areas but expensive [13,14,21,22]. Consequently, different production conditions affect the rice industry's waste [21,22]. Therefore, waste calculation should include unused rice and other waste due to harvesting and processing errors [2,13]. Consumer behavior and attitudes will determine how much rice is wasted at the end of the food value chain [23][24][25]. Edible rice wastage is due to bad taste, rotting, and leftovers [23][24][25].  Figure 3. Conceptual model of the rice waste generated all along the food chain (red arrows represent the interaction points of each stage throughout the value chain) adopted from [14,[26][27][28][29].

Waste Production throughout the Value Chain
After completion of the harvesting process, the paddy is transferred to the rice mills to be processed into white or brown rice. The paddy is subjected to a series of operational procedures during the rice milling process to remove straw particles, half-filled seeds, husks, bran, and germ. Several milling processes exist, such as one-stage milling and multi-stage milling [2,30]. Compared to multi-stage mills, the one-stage milling technique produces fewer by-products. The large-scale industrial milling process has several steps, such as cleaning (removing chaff, dead seeds, seeds that are only half full, and stones), parboiling, de-husking, peeling, polishing, and grading [2,30,31]. In addition, specific  Figure 3. Conceptual model of the rice waste generated all along the food chain (red arrows represent the interaction points of each stage throughout the value chain) adopted from [14,[26][27][28][29].

Waste Production throughout the Value Chain
After completion of the harvesting process, the paddy is transferred to the rice mills to be processed into white or brown rice. The paddy is subjected to a series of operational procedures during the rice milling process to remove straw particles, half-filled seeds, husks, bran, and germ. Several milling processes exist, such as one-stage milling and multi-stage milling [2,30]. Compared to multi-stage mills, the one-stage milling technique produces fewer by-products. The large-scale industrial milling process has several steps, such as cleaning (removing chaff, dead seeds, seeds that are only half full, and stones), parboiling, de-husking, peeling, polishing, and grading [2,30,31]. In addition, specific Waste 2023, 1 337 varieties of rice will be washed in hot water for a certain amount of time to remove the husk, enhance its size, and obtain a better shape of the grains [31].
There are several ways to remove rice husks from rice seeds. The germ particles and outer bran are removed after the husking in a series of huller reels and pearling cones, where the waxy cuticle is sheared off by friction between the high-speed abrasive cone and its casing [30][31][32]. As a result, rice bran is generated as a by-product [33]. The milling gap between the cone and the cover can be changed. Therefore, the grinding ratio can be changed by raising or lowering the cone [30,31]. Typically, in most rice mills, the rice passes through several cones, each with a higher milling rate than the previous one [30]. Since the milling space between the cone and the casing is adjustable [31], the milling rate can be varied by raising or lowering the cone [29]. The bran from the different stages is usually quantified as one product [33]. Next, rice from the pearlier is passed through polishers to get a finer appearance to the rice grains [2,26]. In this process, some parts of the starchy kernel are removed. This by-product is called fine bran if it is included within the inner bran layer. Finally, the mixture of whole and broken rice from the polishers are subjected to the sieving process and graded according to the standard at which the rice is sold [27].
According to previous research, the ratio of useable products to by-products is shown in Figure 4. Pollards are often a blend of polishings and bran. However, all these byproducts are generated during the rice milling process, and their amount is roughly 60% rice husk, 35% rice bran, and 5% polishing from the whole rice mill waste stream [16,[34][35][36][37][38][39].
Waste 2023, 2, FOR PEER REVIEW 5 varieties of rice will be washed in hot water for a certain amount of time to remove the husk, enhance its size, and obtain a better shape of the grains [31]. There are several ways to remove rice husks from rice seeds. The germ particles and outer bran are removed after the husking in a series of huller reels and pearling cones, where the waxy cuticle is sheared off by friction between the high-speed abrasive cone and its casing [30][31][32]. As a result, rice bran is generated as a by-product [33]. The milling gap between the cone and the cover can be changed. Therefore, the grinding ratio can be changed by raising or lowering the cone [30,31]. Typically, in most rice mills, the rice passes through several cones, each with a higher milling rate than the previous one [30]. Since the milling space between the cone and the casing is adjustable [31], the milling rate can be varied by raising or lowering the cone [29]. The bran from the different stages is usually quantified as one product [33]. Next, rice from the pearlier is passed through polishers to get a finer appearance to the rice grains [2,26]. In this process, some parts of the starchy kernel are removed. This by-product is called fine bran if it is included within the inner bran layer. Finally, the mixture of whole and broken rice from the polishers are subjected to the sieving process and graded according to the standard at which the rice is sold [27].
Total rice consumption worldwide from 2008/2009 to 2021/2022 (in 1000 metric tons) is shown in Figure 5. The FAO Agricultural Outlook predicts that paddy production will rise to 52603 metric tons by 2027 compared to 2018 [40]. Due to factors including the increase in agriculturally usable land, technological advancements, and faster population growth in recent decades, global agricultural output has expanded dramatically [40]. . Quantity of rice processing by-products throughout the value chain adopted from [16,[34][35][36][37][38][39].
Total rice consumption worldwide from 2008/2009 to 2021/2022 (in 1000 metric tons) is shown in Figure 5. The FAO Agricultural Outlook predicts that paddy production will rise to 52603 metric tons by 2027 compared to 2018 [40]. Due to factors including the increase in agriculturally usable land, technological advancements, and faster population growth in recent decades, global agricultural output has expanded dramatically [40]. As agricultural waste generates economic benefits, agricultural waste recycling is not meant to degrade value like other industrial waste recycling does [42]. Due to the nature of systemically implemented operations, recycling must be compared to materials that remain the same or lose performance when recycled. Due to their inherent propensity for rapid spoiling, agri-food supply chain management may need to be more sustainable and efficient [43]. Having a systemic vision and viewpoint that prioritizes the concepts of complexity and networks is essential for solving this challenge [13,[42][43][44]. According to this method of thinking, a system is a collection of interconnected individuals whose behaviors are determined by their connections. When all of these elements are considered, they form a holistic system with more worth than just the sum of its individual parts. From this point of view, designing the agri-food scenario using a systemic approach is a viable method to begin a paradigm shift that entails switching from linear to circular structures.

Rice Straw
Rice straw is the vegetative part of the rice plant (Oryza sativa L.). Rice straw consists of the plant's stem, leaves, and pods and is generated after being cut off during harvest. Rice straw comprises cellulose, lignin, waxes, silicates, and minerals. In general, animals are often fed with rice straw, and rice straw can be utilized for creating compost, paper, cow bedding, and crafts; it also offers energy to specific industries and covers agricultural areas [45,46]. The rice straw of the current year is usually burned before the subsequent plowing to prepare the field.

Composition of Rice Straw
Variety, cultivated area, seasons, nitrogen fertilizer, plant maturity, plant health, and several other environmental and human variables significantly impact the chemical composition of any biomass [15,47]. Changes in chemical and physical parameters affect the yield and quality of the final product. Heterogeneity is thus seen as detrimental to the manufacturing process. Additionally, this impacts how by-products are used at the end of their life cycle. Therefore, compositional analysis and structural characterization should be considered to enhance the effectiveness of the valorization options. Tables 1-3 provide the average values of various important parameters describing raw and processed rice As agricultural waste generates economic benefits, agricultural waste recycling is not meant to degrade value like other industrial waste recycling does [42]. Due to the nature of systemically implemented operations, recycling must be compared to materials that remain the same or lose performance when recycled. Due to their inherent propensity for rapid spoiling, agri-food supply chain management may need to be more sustainable and efficient [43]. Having a systemic vision and viewpoint that prioritizes the concepts of complexity and networks is essential for solving this challenge [13,[42][43][44]. According to this method of thinking, a system is a collection of interconnected individuals whose behaviors are determined by their connections. When all of these elements are considered, they form a holistic system with more worth than just the sum of its individual parts. From this point of view, designing the agri-food scenario using a systemic approach is a viable method to begin a paradigm shift that entails switching from linear to circular structures.

Rice Straw
Rice straw is the vegetative part of the rice plant (Oryza sativa L.). Rice straw consists of the plant's stem, leaves, and pods and is generated after being cut off during harvest. Rice straw comprises cellulose, lignin, waxes, silicates, and minerals. In general, animals are often fed with rice straw, and rice straw can be utilized for creating compost, paper, cow bedding, and crafts; it also offers energy to specific industries and covers agricultural areas [45,46]. The rice straw of the current year is usually burned before the subsequent plowing to prepare the field.

Composition of Rice Straw
Variety, cultivated area, seasons, nitrogen fertilizer, plant maturity, plant health, and several other environmental and human variables significantly impact the chemical composition of any biomass [15,47]. Changes in chemical and physical parameters affect the yield and quality of the final product. Heterogeneity is thus seen as detrimental to the manufacturing process. Additionally, this impacts how by-products are used at the end of their life cycle. Therefore, compositional analysis and structural characterization should be considered to enhance the effectiveness of the valorization options. Tables 1-3 provide the average values of various important parameters describing raw and processed rice straw (based on the energy, nutritional, and fertilizer properties, respectively) as obtained by the Waste 2023, 1 339 chemical analyses. Rice straw has a greater silica concentration but less lignin than the straws of other cereals [48]. In order to maximize silica amount in the stem ratio, it is advised that the rice straw be shortened as much as possible [2]. Cell walls may contain silica, or silica may be soluble in water. They are eliminated with urine, where they sometimes crystallize. Since rice straw has a high oxalate content (1-2% of dry matter) and is known to lower Ca concentrations, adding supplemental Ca is often recommended [49]. Variety, time duration between harvest and storage, amount of nitrogen fertilizer used, plant maturity (lignin content increases with maturity), plant health, and environmental conditions affect the quality of rice straw [15]. Although rice straw is a rich energy source, it contains only 2-7% protein and is indigestible due to its high silica content. Therefore, it is considered a coarse and low-quality food source [50]. Minerals such as sulfur may be a limiting factor when considering it as fodder [51]. Other conditions usually involve:

•
Excessive amounts of neutral detergent fiber (NDF) lead to decreased feed consumption and fat-corrected milk output [52]. • There is not enough P, Cu, Zn, Ca, and NaCl to meet the needs of animals [53].

•
In comparison to corn silage, it contains less energy, has an unpleasant taste, and uses nitrogen less effectively [54].

Rice Bran
A significant waste product in the value chain of rice processing is rice bran. It is mainly used as animal feed and is regarded as a healthy source of fiber for pets because of its high nutritional content. Additionally, farmers may get it at a significant discount because of its availability. Due to the high fat and fiber content of rice bran, up to 40% of it is added to the diets of cattle, dogs, pigs, and chickens [60][61][62]. Additionally, rice bran is a valuable feed for many animals since it contains 14-18% oil. Therefore, dehulled rice bran may be utilized in more value-added processes than ordinary rice bran [2].

Composition of Rice Bran
The composition of rice bran has a significant role in defining its possible valorization options. Rice bran's physical and chemical properties are influenced by several aspects concerning the grain and the milling procedure [63]. Rice variety, environmental circumstances, grain size and form, distribution, chemical components, strength of the outermost layer, and breaking resistance are the primary elements affecting rice grain [64]. Additionally, the type of grinding machine is the main factor related to the processing conditions, and the grinding process of different layers of rice grain at different depths shows different chemical compositions [63,64].
Rice bran contains various nutrients, including carbohydrates, proteins, minerals, and lipids. It has a high carbohydrate (cellulose and hemicellulose) content and is simple to employ to create microbial products with added value [65]. As a result, before the valuation procedure, it is required to assess the composition. Because rice bran is employed in valueadded goods as a microbial product or as a food additive, it is generated during several phases of the rice milling process, which are eventually combined and discharged as rice bran. As a consequence, the chemical composition varies significantly [2]. In addition, the chemical composition of raw rice bran and de-oiled rice bran varies in fiber concentration [55]. Tables 4-7 reflect the chemical analyses regarding its energy-related parameters, fertilizerrelated features, feed-related parameters, and bioactive-component qualities.
Rice bran stands out compared to other cereal grains due to the tocotrienol, tocopherol, γ-oryzanol, and β-sitosterol contents [66]. This is significant since there is mounting evidence that these substances may help to lower levels of total plasma cholesterol, triglycerides, and low-density lipoprotein while raising levels of high-density lipoprotein [66]. In addition, ferulic acid and soluble fiber (including β-glucan, pectin, and gums) are found in the indigestible cell walls of rice bran. While the United States Department of Agriculture (USDA) nutritional database values for crude rice bran are often utilized in animal diet formulation [67], caution must be taken since they may not account for changes across rice cultivars [68].
The variety of rice bran utilized determines the chemical content and quality of the end product. According to Hong and his co-workers [69], the fatty-acid content of rice bran oil varies based on the type of rice bran utilized. According to the same paper, rice bran oil, which includes a high concentration of free fatty acids, has several drawbacks when used as fuel in diesel engines in the winter season.

Rice Husk
Rice husk is the outer covering of the rice grain and is produced as a by-product of the rice milling process. It is also called hull and chaff [39,76]. In agricultural nations, this is the most prevalent agricultural by-product. In particular, rice husk is utilized as the primary source of energy in rice mills, poultry farming, and silica-rich cement [56,77,78]. Additionally, small quantities are used as construction materials and fertilizers [79]. However, most rice husks eventually wind up in landfills or are burned in the open air, significantly polluting the environment. The calorific value of rice husk is considerably high, roughly 16,720 kJ/kg [80]. As previously stated, many millers directly burn or gasify rice husk as their primary energy source [16]. Rice husk ash is another type of waste produced during this burning procedure. This additional waste, which makes up around 25% of the original volume of rice husks, has a significant adverse effect on the environment [38].

Composition of Rice Husk
Due to photosynthesis and biochemical interactions, silica and a barrier layer are formed on the rice plant's stem and husk surfaces [81]. These layers have developed to shield the rice plant and its grains from environmental changes such as temperature variations, excessive water evaporation, and microbial assault [81]. Approximately 20-30% of the rice husk is made up of mineral components, including silica and metallic residues containing magnesium (Mg), iron (Fe), and sodium (Na). Calcium (Ca), manganese (Mn), and potassium (K) are further examples of trace elements [82]. Rice husk mainly comprises organic compounds, including cellulose, lignin, and hemicellulose, making up around 70-80% of the total weight [37,83]. Rice husk is maturing into a raw material prospective in the manufacturing sector. However, when rice husk accumulates to the point that it poses a severe threat to the local ecosystem, it is classified as agro-waste. As a result, these adverse effects on the environment must be softened via a process of valorization or value addition. Therefore, it is crucial to conduct a physicochemical investigation and determine the composition of the material. Tables 8-11 show the characteristics of rice husks in terms of energy, fodder, fertilizer, and biochemical properties. The chemical components of rice husk ash are shown in Table 12.

Valorization of Rice Straw
Rice straw could also be valorized for four different purposes: energy production, animal feed, fertilizer, and other uses. By pyrolyzing rice straw, bio-oil, biochar, and syngas may be generated. Numerous chemical substances are found in rice straw bio-oil, including alcohols, acids, furans, aromatics, ketones, phenols, and pyranoglucose [47]. Alcohol and pyranoglucose are created as a consequence of the pyrolysis of cellulose, while hemicelluloses are used to create ketones [47]. The metabolic process through which carbohydrates are changed into alcohols or acids is known as fermentation, as shown in Equations (1) and (2). Second-generation biofuels are made from cellulose feedstock (Equation (1)). Physical, chemical, or biological pretreatment and fermentation are all viable routes to their production. While its lack of competition from other feedstock substrates is an advantage, its need for highly efficient lignohemicellulose enzymatic breakdown is a drawback. Although the commercialization of second-generation ethanol facilities shows promise, the longevity of these plants will primarily rely on the market availability of the feedstocks at affordable costs [90]. Bacteria convert carbohydrates into lactic acid (Equation (2)). Numerous chemical or physical pretreatments are required, followed by enzymatic hydrolysis to convert fermentable sugars from lignocellulosic materials into ethanol or lactic acid. In addition to its many uses in the food and beverage industries, lactic acid and its derivatives also have a wide range of applications in the pharmaceutical, cosmetic, and manufacturing industries [91,92]. Numerous studies have demonstrated that rice straw can be utilized to make second-generation biofuels [47,[93][94][95][96]. Typically, bacteria and yeast turn carbohydrates into lactic acid and sugars into alcohol. Trichoderma reesei, which was derived from decaying rice straw waste, produces cellulases that break down cellulose in the rice straw to glucose, which is then fermented with yeasts such as S. cerevisiae to make ethanol [93,97,98]. (1) The anaerobic digestion process may convert rice straw into biogas [75,99,100]. Anaerobic digestion is a sustainable process that converts organic waste into usable energy. Generating green energy from rice straw is an effective way to lessen the effects of global warming [75]. Around the globe, rice straw is utilized directly as an energy source for heating rooms by direct burning, firing clay pots, and cooking [101]. Additionally, small grids in certain nations such as Nigeria have a higher potential for using rice husks and straw as a source of rural power [102,103]. Umar and co-workers [102,103] claimed that rice straws have the potential to generate 1.3 million MWhy-1 energy in a country such as Nigeria. A 36 MW power plant in Sutton, Ely, Cambridgeshire, was constructed in 2000, producing more than 270 GWh annually while using 200,000 tons of rice straw [104]. Another work shows that Sri Lanka has a total energy capacity of 2129.24 ktoe/year of primary energy from rice straw and rice husk and a capacity of 977 Mwe, allowing it to produce 5.65 TWh of electricity per year [16].
According to literature, rice straw may be used efficiently for composite preparation [105][106][107][108][109][110][111]. Furthermore, rice straw microfibrils at 5% increase the characteristics of rice straw polypropylene composites [107]. Another study highlights many uses of rice-straw cement bricks for load-bearing walls [106]. Rice straw can also be used to lower the price of cement bricks with sufficient thermal insulation, appropriate mechanical qualities, and fire resistance [112][113][114][115]. Furthermore, rice straw-based composites with adhesives generated from starch can be used as ceiling panels and bulletin boards [109]. Finally, following proper pretreatment, rice straw could also be utilized to produce fiberboard [116].
Rice straw may be used to produce many kinds of enzymes in an industrial setting [47,57,58]. Trichoderma harsanum SNRS3 can generate cellulase and xylanase using alkali-pretreated rice straw [58]. According to this research, rice straw is a more effective inducer of the formation of cellulase and xylanase and does not need the inclusion of other chemicals. Lactic acid can be produced by using pretreated rice straw [117,118]. A Naviglio extractor and trifluoroacetic acid could transform rice straw into a unique bioplastic that can be used as shrink films, sheets, or for shape memory effects. Its mechanical characteristics are equivalent to polystyrene in the dry state, while in the wet state, the cast bioplastic performs equal to plasticized poly(vinyl chloride) [119].
Rice straw has a low value as a feeding material, despite its use as bedding for cattle [15]. In contrast to ruminants, which depend on symbiotic bacteria to break down cellulose in the gastrointestinal system, all vertebrates lack the enzymes necessary to dissolve β-acetyl bonds [52]. Additionally, dried rice straw contains low nutrient value owing to its low amount of protein and high amounts of lignin and silica. However, this may be addressed by pretreating it with ammonia or urea [48]. To increase the nutrient availability of rice straw, it can be converted into silage. Therefore, some researchers have focused on improving rice straw harvesting technologies for silage production [120]. Other studies have explored several practical examples of silage processing, including using different additives to enhance fermentation quality and adding yeasts such as Candida tropicalis [121][122][123]. Feed intake, digestibility, rumen fermentation, and microbial N synthesis efficiency are improved after urea treatment of rice straw [124].
Rice straw has been proposed as a low-cost adsorbent for purifying contaminated water [125]. However, straw surface composition and metal speciation significantly impact the adsorption capacity, which changes with metal ions and water pH [126,127]. On the adsorbent surface of rice straw, methyl/methylene, hydroxyl, quaternary ammonium, ether, and carbonyl groups predominate; adding additional quaternary ammonium or incorporating carboxyl groups enhances its adsorption capability [128]. The existence of these groups is supported by the ATR-FTIR spectrum shown in Figure 6. However, competing cations and chelators in the solution are likely to result in decreased sorption capacities [129]. Furthermore, most heavy metal ions exhibit maximal adsorption capacities around pH 5. In contrast, very acidic circumstances promote Cr adsorption [130], which could be the result of the reduction of Cr(VI) to Cr(III). Moreover, cellulose phosphate derived from rice straw that has been treated with NaOH and then reacted with phosphoric acid in the presence of urea has a more remarkable ability to absorb heavy metals. This ability is increased when microwave heating is used to produce it [131]. The addition of epoxy and amino compounds to rice straw by reacting with epichlorohydrin and trimethylamine results in a high sulfate adsorption efficiency, demonstrating the material's anion exchangeability [132]. Like rice husk, straw can be used as an adsorbent for different water contaminants, such as alkali and phenolic chemicals, that can usually be recovered using anionic species [133]. Various adsorbents from rice straws have also been developed to remove dyes from wastewater. An example of cationic dye application is rice straw treated with citric acid, which increases the specific surface area and pore size. These treated straws have been used to absorb crystal violet or methylene blue from an aqueous phase [134]. It has been observed that the addition of activated rice straw causes a significant reduction in microalgae in water, which has been attributed to the synergistic effects of humic chemicals and H 2 O 2 created by the straw breakdown [135]. According to a different investigation, water and methanol extracts from rice straw controlled the cyanobacterium Anabaena sp. but promoted Chlorella sp. To prevent the development of Anabaena sp., rice straw extraction is an economical and ecologically beneficial option, but it may not work as well on other cyanobacteria and microalgae [136].
Rice straw is utilized as organic fertilizer for various crops in many places throughout the globe. It can also be used as a soil conditioner to replace the organic matter in the soil [112]. In addition, rice straw is also a growth medium for mushrooms [137]. Adding biochar derived from rice straw to the soil makes it possible to enhance the characteristics of the soil by lowering its pH, cation exchange capacity (CEC), nutrient availability, and nitrate leaching [138][139][140]. Figure 7 displays an overview of all rice straw value-adding possibilities [2,47,53,57,58,75,100,106,110,130,[137][138][139][141][142][143][144].
phase [134]. It has been observed that the addition of activated rice straw causes a significant reduction in microalgae in water, which has been attributed to the synergistic effects of humic chemicals and H2O2 created by the straw breakdown [135]. According to a different investigation, water and methanol extracts from rice straw controlled the cyanobacterium Anabaena sp. but promoted Chlorella sp. To prevent the development of Anabaena sp., rice straw extraction is an economical and ecologically beneficial option, but it may not work as well on other cyanobacteria and microalgae [136]. Figure 6. ATR-FTIR spectrum of Sri Lankan rice straw (own source) as-received sample acquired at room temperature using a Nicolet FTIR iS10 spectrometer (Nicolet, Madison, WI, USA) equipped with a Smart iTR with diamond plate. Straw was dried at 45 °C, milled, and sieved with a 1000 μm mesh sieve before analysis. Thirty-two scans in the 4000-600 cm −1 range at 4 cm −1 resolutions were co-added.
Rice straw is utilized as organic fertilizer for various crops in many places throughout the globe. It can also be used as a soil conditioner to replace the organic matter in the soil [112]. In addition, rice straw is also a growth medium for mushrooms [137]. Adding biochar derived from rice straw to the soil makes it possible to enhance the characteristics of the soil by lowering its pH, cation exchange capacity (CEC), nutrient availability, and nitrate leaching [138][139][140]. Figure 7 displays an overview of all rice straw value-adding possibilities [2,47,53,57,58,75,100,106,110,130,[137][138][139][141][142][143][144].

Valorization of Rice Bran
Considering the concept of circular economy and green product technology, the biorefinery plan would be the best option for managing and utilizing rice bran [145]. In addition to providing more nutrients than other cereal grains, rice bran has more lipids, protein, and calories [146][147][148] (Table 5). Rice bran is vulnerable to oxidative rancidity; thus, heat stabilization is necessary to avoid spoilage and rancidity [149]. Rice bran oil is widely recommended around the world due to the presence of several beneficial natural and

Valorization of Rice Bran
Considering the concept of circular economy and green product technology, the biorefinery plan would be the best option for managing and utilizing rice bran [145]. In addition to providing more nutrients than other cereal grains, rice bran has more lipids, protein, and calories [146][147][148] (Table 5). Rice bran is vulnerable to oxidative rancidity; thus, heat stabilization is necessary to avoid spoilage and rancidity [149]. Rice bran oil is widely recommended around the world due to the presence of several beneficial natural and healthy bioactive ingredients. Companies have been encouraged to manufacture stabilized rice bran and rice bran products to improve the health of organisms because of the unique mix of lipids, minerals, and nutrients found in rice bran, including calcium, phosphorus, and magnesium [65]. In addition, several researchers have found that the manufacturing of de-oiled rice bran and rice bran oil is in great demand worldwide [62,150,151].
The production of biodiesel from rice bran is actively marketed all over the globe. However, rice bran oil must be removed from the rice bran to produce biodiesel via a transesterification process [152]. Several methods have purportedly been utilized to produce biodiesel from rice bran oil, including acid-catalyzed and base-catalyzed transesterification and lipase-catalyzed transesterification. However, each technique has different environmental effects as well as technological and economic benefits and drawbacks [153][154][155][156].
Some researchers have examined bioethanol synthesis from rice by-products such as rice bran, defatted rice bran, and rice washing drainage [157][158][159][160]. After pretreating stripped rice bran with diluted acid and detoxifying it, the Pichia stipitis NCIM 3499 strain generated an ethanol concentration of 12.47 g/L [161]. Additionally, another study found that biological pretreatment with the fungus Aspergillus niger increased ethanol output [162]. Numerous scientists have attempted to manufacture lactic acid from dehulled rice bran using various microbes [163][164][165][166]. Another study discovered that many Bacillus coagulans isolates could grow in denatured rice bran enzymatic hydrolysates without adequate nutrients, with the majority producing concentrations of lactic acid more significant than 65 g/L and yields greater than 0.85 g/g [163]. They stressed in the same paper that manufacturing lactic acid from dehulled rice bran might be economically viable.
Due to its numerous similarities to gasoline, biobutanol is the most ecologically benign substitute for traditional fossil fuels. Additionally, when HCl and enzyme treatments are used together, they can remove 41.18 g/L of sugar from dehulled rice bran and 36.2 g/L of sugar from rice bran [167]. Another study reported that both defatted rice bran hydrolysates and rice bran hydrolysates could be fermented in bioreactors with nutrients to make butanol at a rate of 12.24 g/L and 11.4 g/L, respectively [163].
Rice bran can be used as an adsorbent for polluting substances because it has a granular shape, is chemically stable, does not dissolve in water, and is easy to get. Its surface has several active sites that can remove pollutants [39]. How well these sites work depends on the chemical nature of the solution and whether or not there are other ions in the solution besides the ones to be trapped. Additionally, various functional groups on the surface of rice bran, such as hydroxyl and carbonyl groups, are responsible for its high adsorption effectiveness [39]. The existence of these groups is supported by the ATR-FTIR spectrum shown in Figure 8, which exhibits rice-straw-like peaks. Some researchers have tried to figure out the best way to remove arsenic from water using a fixed-bed column system made of rice bran. The objective of this study was to look at how different design parameters, such as flow rate, bed height, and initial concentration affected the adsorption process. The uptake capacities of As(III) and As(V) were found to be 66.95 µg/g and 78.95 µg/g, respectively [168].
effectiveness [39]. The existence of these groups is supported by the ATR-FTIR spectrum shown in Figure 8, which exhibits rice-straw-like peaks. Some researchers have tried to figure out the best way to remove arsenic from water using a fixed-bed column system made of rice bran. The objective of this study was to look at how different design parameters, such as flow rate, bed height, and initial concentration affected the adsorption process. The uptake capacities of As(III) and As(V) were found to be 66.95 μg/g and 78.95 μg/g, respectively [168]. Figure 8. ATR-FTIR spectrum of Sri Lankan rice bran (own source) as-received sample acquired at room temperature using a Nicolet FTIR iS10 spectrometer (Nicolet, Madison, WI, USA) equipped with a Smart iTR with diamond plate. Bran was dried at 45 °C, milled, and sieved with a 1000 μm mesh sieve before analysis. Thirty-two scans in the 4000-600 cm −1 range at 4 cm −1 resolutions were co-added.
Another excellent substitute for conventional fossil fuels is hydrogen, which, when oxidized, merely produces water vapor (H2O). Additionally, hydrogen has a higher energy content for mass units than traditional fuels, ranging from 112 to 142 kJ/g [168,169]. Photo and dark fermentation and their combination are all capable of producing bio-hydrogen [170]. Some studies have investigated hydrogen generation from rice bran and defatted rice bran using isolated bacteria from the same substrates. They identified E.ludwigli IF2SW-B4 as the most promising strain. When rice bran was utilized as a substrate, 545 mL/L of bio-hydrogen was produced [171]. The whole biotechnology process will be more economical once enzymes are produced utilizing low-cost ingredients. For the Figure 8. ATR-FTIR spectrum of Sri Lankan rice bran (own source) as-received sample acquired at room temperature using a Nicolet FTIR iS10 spectrometer (Nicolet, Madison, WI, USA) equipped with a Smart iTR with diamond plate. Bran was dried at 45 • C, milled, and sieved with a 1000 µm mesh sieve before analysis. Thirty-two scans in the 4000-600 cm −1 range at 4 cm −1 resolutions were co-added.
Another excellent substitute for conventional fossil fuels is hydrogen, which, when oxidized, merely produces water vapor (H 2 O). Additionally, hydrogen has a higher energy content for mass units than traditional fuels, ranging from 112 to 142 kJ/g [168,169]. Photo and dark fermentation and their combination are all capable of producing biohydrogen [170]. Some studies have investigated hydrogen generation from rice bran and defatted rice bran using isolated bacteria from the same substrates. They identified E.ludwigli IF2SW-B4 as the most promising strain. When rice bran was utilized as a substrate, 545 mL/L of bio-hydrogen was produced [171]. The whole biotechnology process will be more economical once enzymes are produced utilizing low-cost ingredients. For the environmentally friendly and more effective release of fermentable sugars from different affordable and sustainable biomasses such as rice bran, enzymatic hydrolysis is used [171]. Researchers have conducted several investigations to synthesize enzymes from defatted rice bran and rice bran [172][173][174]. Figure 9 displays an overview of all rice bran value-adding possibilities. environmentally friendly and more effective release of fermentable sugars from different affordable and sustainable biomasses such as rice bran, enzymatic hydrolysis is used [171]. Researchers have conducted several investigations to synthesize enzymes from defatted rice bran and rice bran [172][173][174]. Figure 9 displays an overview of all rice bran value-adding possibilities.

Valorization of Rice Husk
South Asian countries such as India, Pakistan, Bangladesh, and Sri Lanka were among the best in the world in utilizing rice husk from 1970 to 1985 [175]. In addition, governments and other organizations engaged in rice farming and the post-harvest process have provided essential direction and strong support for rice husk management. Rice husk differs from other agricultural wastes in several important physicochemical aspects, including high silica concentration, low density, high porosity, and a significant outer surface area [176]. Because of these qualities, rice husk is more valuable than other waste materials. As a result, it covers a range of industrial applications.
In water treatment, using activated carbon for the adsorption process to remove heavy metals from industrial effluents is appealing. Numerous functional groups, including hydroxyl, methyl/methylene, ether, and carbonyl are present on the rice husk's adsorbent surface, contributing to the material's enhanced adsorbent efficiency ( Figure 10) [39]. The existence of these groups is supported by the ATR-FTIR spectrum shown in Figure  10, which mainly exhibits bands at 3307 cm −1 , 2921 cm −1 , 2000-2500 cm −1 , 1654 cm −1 , 1034 cm −1 , and 788 cm −1 representing hydroxyl groups, C-H groups, C≡C or C≡N bonds, C=O groups, C-O and C-H bonds, and Si-O bonds, respectively.
The presence of several types of polar groups on the surface of rice husks results in a significant cation exchange capacity, indicating a potential efficacy in physisorption mode

Valorization of Rice Husk
South Asian countries such as India, Pakistan, Bangladesh, and Sri Lanka were among the best in the world in utilizing rice husk from 1970 to 1985 [175]. In addition, governments and other organizations engaged in rice farming and the post-harvest process have provided essential direction and strong support for rice husk management. Rice husk differs from other agricultural wastes in several important physicochemical aspects, including high silica concentration, low density, high porosity, and a significant outer surface area [176]. Because of these qualities, rice husk is more valuable than other waste materials. As a result, it covers a range of industrial applications.
In water treatment, using activated carbon for the adsorption process to remove heavy metals from industrial effluents is appealing. Numerous functional groups, including hydroxyl, methyl/methylene, ether, and carbonyl are present on the rice husk's adsorbent surface, contributing to the material's enhanced adsorbent efficiency ( Figure 10) [39]. The existence of these groups is supported by the ATR-FTIR spectrum shown in Figure 10, which mainly exhibits bands at 3307 cm −1 , 2921 cm −1 , 2000-2500 cm −1 , 1654 cm −1 , 1034 cm −1 , and 788 cm −1 representing hydroxyl groups, C-H groups, C≡C or C≡N bonds, C=O groups, C-O and C-H bonds, and Si-O bonds, respectively.
conclusion. When modified rice husk is cross-linked with poly(methyl methacrylate-comaleic anhydride), nanoparticles are formed that can be used to absorb heavy metal ions (such as Pb(II)) and dyes (such as crystal violet) [184]. Researchers have discovered that novel green ceramic hollow fiber membranes made from rice husk ash can act as an adsorber and separator to remove heavy metals from water effectively [185]. Treating rice husk with H2SO4 and NaOH prior to heating enhances the product's capacity to absorb phenol [186]. Figure 10. ATR-FTIR spectra of Sri Lankan rice husk (own source) as-received sample acquired at room temperature using a Nicolet FTIR iS10 spectrometer (Nicolet, Madison, WI, USA) equipped with a Smart iTR with diamond plate. Husk was dried at 45 °C, milled, and sieved with a 1000 μm mesh sieve before analysis. Thirty-two scans in the 4000-600 cm −1 range at 4 cm −1 resolutions were co-added.
Biomass derived from agricultural waste has been identified as a rich source of feedstock for biochar production; however, at present, farmers, and other stakeholders such as millers, practice open field burning or open dumping to dispose of these by-products. Compared to low-cost traditional treatment procedures (boiling, chlorination, sand filtration, and solar disinfection), biochar adsorbent offers various advantages. It is also suitable for low-income countries because of its availability, cheap cost, and accessible technology. Low-cost conventional approaches mainly destroy pathogens, while biochar can remove a wide range of pollutants from drinking water. Existing processes, such as chlorination, emit carcinogenic by-products, and boiling concentrates chemical contaminants. Pyrolysis temperature, vapor residence time, and other chemical and physical alteration variables influence the properties of biochar ( Figure 11). Compared to conventionally activated biochar, rice husk biochar activated by a single phase of KOH-catalyzed pyrolysis under CO2 has a larger surface area and greater capacity for phenol adsorption [187]. The Figure 10. ATR-FTIR spectra of Sri Lankan rice husk (own source) as-received sample acquired at room temperature using a Nicolet FTIR iS10 spectrometer (Nicolet, Madison, WI, USA) equipped with a Smart iTR with diamond plate. Husk was dried at 45 • C, milled, and sieved with a 1000 µm mesh sieve before analysis. Thirty-two scans in the 4000-600 cm −1 range at 4 cm −1 resolutions were co-added.
The presence of several types of polar groups on the surface of rice husks results in a significant cation exchange capacity, indicating a potential efficacy in physisorption mode [177]. Rice husk treated with H 3 PO 4 showed enhanced copper absorption capacity [178]. Some studies found that chemically treated rice husk can absorb cationic dyes such as methylene blue [179,180] and malachite green [181]. To study the absorption of fluoride from aqueous solutions, some researchers produced rice husk by chemically impregnating it with nitric acid, followed by physical activation [182]. According to their findings, the highest absorption of fluoride was 75% at a pH of 2, and the ability to absorb fluoride decreased as the pH rose from 2 to 10. Ahmaruzzaman and Gupta [183] confirmed this conclusion. When modified rice husk is cross-linked with poly(methyl methacrylateco-maleic anhydride), nanoparticles are formed that can be used to absorb heavy metal ions (such as Pb(II)) and dyes (such as crystal violet) [184]. Researchers have discovered that novel green ceramic hollow fiber membranes made from rice husk ash can act as an adsorber and separator to remove heavy metals from water effectively [185]. Treating rice husk with H 2 SO 4 and NaOH prior to heating enhances the product's capacity to absorb phenol [186].
Biomass derived from agricultural waste has been identified as a rich source of feedstock for biochar production; however, at present, farmers, and other stakeholders such as millers, practice open field burning or open dumping to dispose of these by-products. Compared to low-cost traditional treatment procedures (boiling, chlorination, sand filtration, and solar disinfection), biochar adsorbent offers various advantages. It is also suitable for low-income countries because of its availability, cheap cost, and accessible technology. Low-cost conventional approaches mainly destroy pathogens, while biochar can remove a wide range of pollutants from drinking water. Existing processes, such as chlorination, emit carcinogenic by-products, and boiling concentrates chemical contaminants. Pyrolysis temperature, vapor residence time, and other chemical and physical alteration variables influence the properties of biochar ( Figure 11). Compared to conventionally activated biochar, Waste 2023, 1 352 rice husk biochar activated by a single phase of KOH-catalyzed pyrolysis under CO 2 has a larger surface area and greater capacity for phenol adsorption [187]. The gold-thiourea complex can be effectively adsorbed using biochar derived from rice husks that have been heated to 300 • C and have particular silanol groups and oxygen functional groups [188]. Rice husk-activated carbons are effective in removing phenol [189], chlorophenols [190], basic dyes [191,192], and acidic dyes [193,194] from water, as well as heavy metal ions such as Cr(VI) at low pH [195,196], Cu(II), and Pb(II) [197].
Rice husk pellets provide an alternative to diesel oil and coal for energy generation in small-scale power plants. Through pyrolysis and gasification processes, they may also be used to produce biodiesel [202]. Rice husk, subjected to a thermochemical conversion process, may provide an inexhaustible supply of gaseous and liquid fuel. Thermochemical and biochemical processes are shown in Figure 12 as the two ways rice husk can be converted to energy. Thermochemical processes such as combustion, gasification, and pyrolysis are often regarded as the primary means of producing secondary energy substances. Fermentation and transesterification are also critical biochemical steps in ethanol and biodiesel production [175,203,204]. The briquettes made from rice husks with starch or gum arabic as binders burn stronger and more efficiently than timbers [205]. Another study describes a reactor that uses rice husk combined with sawdust or charcoal to generate high-grade fuel [206]. In order to obtain charcoal, which has a comparatively high calorific content, rice husk is subjected to carbonation using starch as a binder and either ferrous sulfate or sodium hypophosphite, which promote ignition [135]. Economically viable primary pyrolysis oil, suitable as boiler fuel oil and for the manufacture of catalytically treated, upgraded liquid products, can be obtained by fluidized-bed rapid pyrolysis with the catalytic treatment of rice husk [207].
Materials derived from rice husks have been used in the world's most advanced technical equipment and industries. For example, the Indian space agency has figured out how to extract high-quality silica from rice husk ash. This high-purity silica might also increase its use in the information technology sector [175]. In addition, the same publication has stated that other scientists have discovered how to extract and purify silica from rice husk ash to produce semiconductors. In addition, several researchers have pointed out the prospects of using silicon-based compounds extracted from rice husk and ash in various industries [208,209]. Figure 11. Strategic schematic diagram for biochar production, modification/engineering, characteristics, and water treatment applications adopted from [198][199][200][201].
Rice husk pellets provide an alternative to diesel oil and coal for energy generation in small-scale power plants. Through pyrolysis and gasification processes, they may also be used to produce biodiesel [202]. Rice husk, subjected to a thermochemical conversion process, may provide an inexhaustible supply of gaseous and liquid fuel. Thermochemical and biochemical processes are shown in Figure 12 as the two ways rice husk can be converted to energy. Thermochemical processes such as combustion, gasification, and pyrolysis are often regarded as the primary means of producing secondary energy substances. Fermentation and transesterification are also critical biochemical steps in ethanol and biodiesel production [175,203,204]. The briquettes made from rice husks with starch or gum arabic as binders burn stronger and more efficiently than timbers [205]. Another study describes a reactor that uses rice husk combined with sawdust or charcoal to generate high-grade fuel [206]. In order to obtain charcoal, which has a comparatively high calorific content, rice husk is subjected to carbonation using starch as a binder and either ferrous sulfate or sodium hypophosphite, which promote ignition [135]. Economically viable primary pyrolysis oil, suitable as boiler fuel oil and for the manufacture of catalytically treated, upgraded liquid products, can be obtained by fluidized-bed rapid pyrolysis with the catalytic treatment of rice husk [207].
Materials derived from rice husks have been used in the world's most advanced technical equipment and industries. For example, the Indian space agency has figured out how to extract high-quality silica from rice husk ash. This high-purity silica might also increase its use in the information technology sector [175]. In addition, the same publication has stated that other scientists have discovered how to extract and purify silica from rice husk ash to produce semiconductors. In addition, several researchers have pointed out the prospects of using silicon-based compounds extracted from rice husk and ash in various industries [208,209].
Li et al. [210] stated that KOH-activated rice husk char could make porous carbons for CO2 capture at low pressures. Low activation temperature and a small KOH/char ratio favor high CO2 absorption and CO2-over-N2 selectivity. This is presumed to be due to the micropores' narrow size distribution. A similar investigation has been conducted using KOH-activated rice husk biochar for hydrogen storage. It revealed that 77 K/6 bars have a hydrogen storage capacity of 2.3%wt [211]. Figure 12. Energy conversion process of rice husk, adopted from [176,203,204]. Due to its microscopic particle size, high solution pH, and low supportive electrolyte content, rice husk ash is an effective adsorbent for heavy metals, including lead and mercury [212,213]. In addition, the fluoride-absorption capacity of rice husk ash treated with aluminum hydroxide is enormous [214]. Both the effective removal of phenol from aqueous solutions and the adsorption of various dyes, including indigo carmine, Congo red, and methylene blue, has been accomplished using rice husk ash [180,[215][216][217][218]. Due to its high silica concentration and the existence of mesopores and macropores, rice husk ash is a promising adsorbent for removing contaminants from biodiesel [219]. Zou and Yang [220] examined different approaches for generating silica and silica aerogel from rice husk ash. Epoxy paints can use rice husk ash as a filler, and the inclusion of rice husk ash can Li et al. [210] stated that KOH-activated rice husk char could make porous carbons for CO 2 capture at low pressures. Low activation temperature and a small KOH/char ratio favor high CO 2 absorption and CO 2 -over-N 2 selectivity. This is presumed to be due to the micropores' narrow size distribution. A similar investigation has been conducted using KOH-activated rice husk biochar for hydrogen storage. It revealed that 77 K/6 bars have a hydrogen storage capacity of 2.3%wt [211]. Due to its microscopic particle size, high solution pH, and low supportive electrolyte content, rice husk ash is an effective adsorbent for heavy metals, including lead and mercury [212,213]. In addition, the fluoride-absorption capacity of rice husk ash treated with aluminum hydroxide is enormous [214]. Both the effective removal of phenol from aqueous solutions and the adsorption of various dyes, including indigo carmine, Congo red, and methylene blue, has been accomplished using rice husk ash [180,[215][216][217][218]. Due to its high silica concentration and the existence of mesopores and macropores, rice husk ash is a promising adsorbent for removing contaminants from biodiesel [219]. Zou and Yang [220] examined different approaches for generating silica and silica aerogel from rice husk ash.
Epoxy paints can use rice husk ash as a filler, and the inclusion of rice husk ash can improve a variety of qualities, including wear resistance, elongation, and scratch resistance [221]. In addition, a paper's printing quality might be enhanced by using rice husk ash. Because rice husk ash contains more silica, it can improve the paper's surface quality, and the coating layer it generates reduces the quantity of ink penetrating the paper [222]. Additionally, some researchers have studied pigments made from rice husk and ash [175].
Rice husk ash can improve the properties of cementitious materials such as concrete in resistance to corrosion. With the addition of rice husk ash, the cement particles are encased in a calcium silicate hydrate gel, making the cement denser and less porous. These characteristics are also helpful in protecting concrete against cracking, corrosion, and chemical breakdown caused by leaching agents [89,[223][224][225][226]. The use of powdered rice husk ash derived under controlled burning conditions as a reinforcing filler for different rubbers has been researched. The authors discovered that substantially reinforced rice husk ash had no adverse effect on the vulcanization or aging behavior of certain rubber types, such as natural rubber, styrene-butadiene rubber, and ethylene-propylene-diene elastomers [227]. Moreover, the use of rice husk ash as a raw material in cement production has the potential to reduce production costs. Figure 13 displays an overview of all rice husk and rice husk ash value-adding possibilities.
Waste 2023, 2, FOR PEER REVIEW 21 improve a variety of qualities, including wear resistance, elongation, and scratch resistance [221]. In addition, a paper's printing quality might be enhanced by using rice husk ash. Because rice husk ash contains more silica, it can improve the paper's surface quality, and the coating layer it generates reduces the quantity of ink penetrating the paper [222]. Additionally, some researchers have studied pigments made from rice husk and ash [175]. Rice husk ash can improve the properties of cementitious materials such as concrete in resistance to corrosion. With the addition of rice husk ash, the cement particles are encased in a calcium silicate hydrate gel, making the cement denser and less porous. These characteristics are also helpful in protecting concrete against cracking, corrosion, and chemical breakdown caused by leaching agents [89,[223][224][225][226]. The use of powdered rice husk ash derived under controlled burning conditions as a reinforcing filler for different rubbers has been researched. The authors discovered that substantially reinforced rice husk ash had no adverse effect on the vulcanization or aging behavior of certain rubber types, such as natural rubber, styrene-butadiene rubber, and ethylene-propylene-diene elastomers [227]. Moreover, the use of rice husk ash as a raw material in cement production has the potential to reduce production costs. Figure 13 displays an overview of all rice husk and rice husk ash value-adding possibilities. Figure 13. Possible valorization options for rice husk and its ash [205][206][207][208][209][210][212][213][214][216][217][218][219][220][221][222][224][225][226]228,229]. Figure 13. Possible valorization options for rice husk and its ash [176-202,205-210,212-214,216-222, 224-226,228,229].

Circular Economy
The circular economy (CE) has gained attention as a way to overcome the current production and consumption model of "take, make and throw away" or the linear model based on continuous progress and increasing resource output [230]. CE aims to optimize resource usage and achieve an equilibrium between economy, environment, and society by supporting closed manufacturing processes [231,232]. Numerous studies have focused on political, environmental [233], economic, and corporate issues [13]. The "reduce, reuse and recycle" (3R) concept has nine steps from recovery to recovery (Figure 14). Industrial ecology, environmental economics, and environmental policy have influenced CE [13,232,233]. Some authors have claimed that broad systems theory is where CE first emerged [13,232]. Modern concepts including "sustainable design", "performance economy", "cradle-to-grave", "biomimicry", and "blue economy" are associated with developing CE [234,235]. CE was first introduced to Europe in 1976 with Germany's Waste Disposal Act [13,232]. Later, the European Union promoted CE through the Waste Directive 2008/98/EC and the Circular Economy Package [236]. "Reduce, reuse and recycle" is part of the European Waste Directive 2008/98/EC and has been part of the US Solid Waste Agenda since 1989 [236,237]. "CE includes corporate-level sustainable production practices, increasing producer and consumer awareness and responsibility, using renewable technology and materials (where possible), and adopting appropriate, consistent and clear policies and systems" [238].

Circular Economy
The circular economy (CE) has gained attention as a way to overcome the current production and consumption model of "take, make and throw away" or the linear model based on continuous progress and increasing resource output [230]. CE aims to optimize resource usage and achieve an equilibrium between economy, environment, and society by supporting closed manufacturing processes [231,232]. Numerous studies have focused on political, environmental [233], economic, and corporate issues [13]. The "reduce, reuse and recycle" (3R) concept has nine steps from recovery to recovery (Figure 14). Industrial ecology, environmental economics, and environmental policy have influenced CE [13,232,233]. Some authors have claimed that broad systems theory is where CE first emerged [13,232]. Modern concepts including "sustainable design", "performance economy", "cradle-to-grave", "biomimicry", and "blue economy" are associated with developing CE [234,235]. CE was first introduced to Europe in 1976 with Germany's Waste Disposal Act [13,232]. Later, the European Union promoted CE through the Waste Directive 2008/98/EC and the Circular Economy Package [236]. "Reduce, reuse and recycle" is part of the European Waste Directive 2008/98/EC and has been part of the US Solid Waste Agenda since 1989 [236,237]. "CE includes corporate-level sustainable production practices, increasing producer and consumer awareness and responsibility, using renewable technology and materials (where possible), and adopting appropriate, consistent and clear policies and systems" [238]. Priority order for circularity techniques within the production chain, adopted from [230][231][232].
A systemic perspective requires new solutions focusing on environmental processes and stakeholders in the relevant sectors. Agri-food waste management aims to increase resource efficiency and protect the environment. Innovative waste management solutions are needed to reduce waste or transform it into new raw materials. These management practices are part of the CE system, an industrial framework meant to be restorative or regenerative (producing no waste or pollution). Several studies have demonstrated the potential to produce bioenergy, biodegradable polymers, alcohols, and antioxidants from the food supply chain to manage agricultural wastes effectively. Thus, agricultural waste is a source of macronutrients, including proteins, carbohydrates, and fats, as well as micronutrients and bioactive chemicals used to generate new products. Biorefineries use Figure 14. Priority order for circularity techniques within the production chain, adopted from [230][231][232]. A systemic perspective requires new solutions focusing on environmental processes and stakeholders in the relevant sectors. Agri-food waste management aims to increase resource efficiency and protect the environment. Innovative waste management solutions are needed to reduce waste or transform it into new raw materials. These management practices are part of the CE system, an industrial framework meant to be restorative or regenerative (producing no waste or pollution). Several studies have demonstrated the potential to produce bioenergy, biodegradable polymers, alcohols, and antioxidants from the food supply chain to manage agricultural wastes effectively. Thus, agricultural waste is a source of macronutrients, including proteins, carbohydrates, and fats, as well as micronutrients and bioactive chemicals used to generate new products. Biorefineries use agricultural waste to produce value-added energy and industrial goods. The scientific community considers this concept a sustainable alternative.
If a circular economy-based waste management system is successfully implemented, waste can become a source of wealth for a community or country. Sweden is a prime instance of this. They have made significant investments in infrastructure and imported a large percentage of Norway's waste to convert it into energy (electricity and heat). Thanks to this decision, Sweden can turn Norway's waste into money for its people. Consequently, it charges Norway for waste treatment, generates sufficient energy (electricity and heat) from Norway's waste to meet demand, and recycles or sells the metals it extracts from the bottom ash. In addition, the remaining bottom ash is taken to use in public infrastructure and precast concrete products, drastically reducing the need for mining operations. Because of its innovative approach to waste management within the context of the circular economy, Sweden is a standout among countries [12].

Paddy and Rice Value Chain in Sri Lanka
Since 800 BC, rice has been grown in Sri Lanka [239]. Rice agriculture has grown throughout the nation due to ideal climatic conditions and geographic locations for paddy production ( Figure 15). The low country dry zone has the highest rice production as this zone has had a well-planned irrigation system since ancient times. According to the Sri Lanka Rice Research Center, rice consumption per capita in 2019 was close to 107 kg. The Yala season (March to August) and the Maha season (September to December) are the two primary rice harvesting seasons in Sri Lanka. The paddy and rice value chain in Sri Lanka comprises public and private partners connecting rice producers such as small, medium, and industrial-scale farmers, millers (cooperative millers, rice marketing boards, and private millers), food processors, and consumers. In specific Sri Lankan mills, just one step of milling is performed [14]. Figure 16 represents the paddy and rice value chain in Sri Lanka.
Small-scale farmers in villages and semi-urban areas produce sufficient rice for personal use and store it throughout the season or the year. Mid-level farmers store for their consumption and sell excess paddy. Farmers sell these quantities directly to millers, and paddy collectors act as intermediaries in this buying and selling process. After collecting a substantial amount of paddy, they will sell it to co-operative or industrial-scale mills. Large rice farmers who grow rice on an industrial scale sell their crops directly to rice processing mills or process them in their mills. In most cases, small-scale private millers process only a small amount of waste in a particular area throughout the year or during a specific period.  Figure 15. Map of Sri Lanka district distribution by climate zone and geographic regions adopted from [240].  Figure 15. Map of Sri Lanka district distribution by climate zone and geographic regions adopted from [240].

Rice Waste Availability in Sri Lanka
Waste 2023, 2, FOR PEER REVIEW 24 Figure 15. Map of Sri Lanka district distribution by climate zone and geographic regions adopted from [240].

Rice Waste Availability in Sri Lanka
The vegetative portion of the rice plant is called rice straw (Oryza sativa L.). After the grain has been harvested or sliced, rice straw is produced. According to several researchers, the ratio of rice straw to grain is between 1.0 and 1.5 kg [2,16,39]. Previous studies have shown that 0.1 kg of rice bran is produced for every kilogram of rice [2,78]. Various scholars have revealed that approximately 20-28% wt of rice husk generates greater grain weight [2,35,37,38]. Abbas and Ansumali [79] noted that around 50% of the country's rice mill husk is burned to fulfill its energy needs for steam production. According to some literature [38], approximately 25% of rice husk ash is generated during the burning process. According to the data gathered from Sri Lanka Rice Research Center, in the 2019 Yala season, Sri Lanka produced 1,519,475 metric tons of rice, 1,899,343.75 metric tons of rice straw, 151,947.5 metric tons of rice bran, 364,674 metric tons of rice husk, and 45,584.25 metric tons of rice husk ash as shown in Figure 17. Because of varying weather conditions and several other variables, rice production differs among districts.
Waste 2023, 2, FOR PEER REVIEW 25 The vegetative portion of the rice plant is called rice straw (Oryza sativa L.). After the grain has been harvested or sliced, rice straw is produced. According to several researchers, the ratio of rice straw to grain is between 1.0 and 1.5 kg [2,16,39]. Previous studies have shown that 0.1 kg of rice bran is produced for every kilogram of rice [2,78]. Various scholars have revealed that approximately 20-28% wt of rice husk generates greater grain weight [2,35,37,38]. Abbas and Ansumali [79] noted that around 50% of the country's rice mill husk is burned to fulfill its energy needs for steam production. According to some literature [38], approximately 25% of rice husk ash is generated during the burning process. According to the data gathered from Sri Lanka Rice Research Center, in the 2019 Yala season, Sri Lanka produced 1,519,475 metric tons of rice, 1,899,343.75 metric tons of rice straw, 151,947.5 metric tons of rice bran, 364,674 metric tons of rice husk, and 45,584.25 metric tons of rice husk ash as shown in Figure 17. Because of varying weather conditions and several other variables, rice production differs among districts.

Potentiality of Rice Waste Valorization in Sri Lanka
Currently, rice industry by-products are resold and recycled but have yet to be fully utilized. They are high in nutrients and have chemical-physical properties, making them useful in various sectors of the economy (food, fertilizer, building materials, energy, etc.).

Potentiality of Rice Waste Valorization in Sri Lanka
Currently, rice industry by-products are resold and recycled but have yet to be fully utilized. They are high in nutrients and have chemical-physical properties, making them useful in various sectors of the economy (food, fertilizer, building materials, energy, etc.). Therefore, sustainable and efficient agricultural waste management has emerged as a critical concern for all parties involved in the agricultural value chain in Sri Lanka. According to Figure 17, massive volumes of waste are discharged into the environment at every point along the value chain, permanently harming the air, water, and land. Proper management and implementation of a sustainable valorization system is a complex transformation for developing countries. It needs more funding, laws, and regulations to enhance the capabilities and techniques for agricultural waste management and coordinated efforts by local, regional, and global stakeholders. Therefore, any waste management system that applies to this industry should be founded on value principles and promote the circular economy throughout the process. Figure 18 displays the challenges that should be overcome to implement a sustainable valorization waste management system. The authors have found some feasible valorization techniques for rice processing by-products in the Sri Lankan context:

•
Animal feed: Rice straw and rice bran can be used as animal feed, and a fitting technology can be used to produce nutritious and high-quality goods. • Energy generation: Rice straw and rice husk can be used in grate-fired combustion boilers using steam turbine cycle technology to produce energy. • Energy storage: activated porous rice husk and bran biochar can be used as hydrogenstoring carbon-based material with significant added value. • Adsorbent in water treatment: Activated carbon from rice husk and rice straw can be utilized for wastewater treatment. • Anaerobic co-digestion: A more efficient method of valorizing rice-related waste to produce green energy. • Fertilizer production: Rice waste has a high potential for producing biochar and fertilizer to improve soil structure and organic matter content. • Adsorption: The industrial production of adsorption by rice husks has enormous potential. • Construction sector: Waste from the rice value chain can be effectively used in the building industry without affecting the end product negatively. • Rice husk can be used in the ceramics sector, according to several studies. • Rubber industry: Rice can may be used as filler in the rubber industry since Sri Lanka is one of the greatest rubber-producing nations in the world.
Waste 2023, 2, FOR PEER REVIEW 26 Therefore, sustainable and efficient agricultural waste management has emerged as a critical concern for all parties involved in the agricultural value chain in Sri Lanka. According to Figure 17, massive volumes of waste are discharged into the environment at every point along the value chain, permanently harming the air, water, and land. Proper management and implementation of a sustainable valorization system is a complex transformation for developing countries. It needs more funding, laws, and regulations to enhance the capabilities and techniques for agricultural waste management and coordinated efforts by local, regional, and global stakeholders. Therefore, any waste management system that applies to this industry should be founded on value principles and promote the circular economy throughout the process. Figure 18 displays the challenges that should be overcome to implement a sustainable valorization waste management system. The authors have found some feasible valorization techniques for rice processing by-products in the Sri Lankan context: • Animal feed: Rice straw and rice bran can be used as animal feed, and a fitting technology can be used to produce nutritious and high-quality goods. • Energy generation: Rice straw and rice husk can be used in grate-fired combustion boilers using steam turbine cycle technology to produce energy. • Energy storage: activated porous rice husk and bran biochar can be used as hydrogen-storing carbon-based material with significant added value. • Adsorbent in water treatment: Activated carbon from rice husk and rice straw can be utilized for wastewater treatment. • Anaerobic co-digestion: A more efficient method of valorizing rice-related waste to produce green energy.

•
Fertilizer production: Rice waste has a high potential for producing biochar and fertilizer to improve soil structure and organic matter content. • Adsorption: The industrial production of adsorption by rice husks has enormous potential.

•
Construction sector: Waste from the rice value chain can be effectively used in the building industry without affecting the end product negatively.

•
Rice husk can be used in the ceramics sector, according to several studies.

•
Rubber industry: Rice can may be used as filler in the rubber industry since Sri Lanka is one of the greatest rubber-producing nations in the world.

Management Issues for Handling Rice Industry By-Products
Lastly, the authors would like to stress the importance of taking precautions around rice husk remnants since they always include small dust particles created during processing. Breathing filters should be worn while working with these substances since they may irritate the upper respiratory tract and trigger allergic responses, including rhinitis, asthma, bronchitis, COPD, and extrinsic allergic alveolitis. Moreover, the dust from rice husk and straw may be readily ignited due to the small size of the dust particles. They can produce explosive concentrations in the air and may smolder when exposed to heat

Management Issues for Handling Rice Industry By-Products
Lastly, the authors would like to stress the importance of taking precautions around rice husk remnants since they always include small dust particles created during processing. Breathing filters should be worn while working with these substances since they may irritate the upper respiratory tract and trigger allergic responses, including rhinitis, asthma, bronchitis, COPD, and extrinsic allergic alveolitis. Moreover, the dust from rice husk and straw may be readily ignited due to the small size of the dust particles. They can produce explosive concentrations in the air and may smolder when exposed to heat [241,242]. As a result, when working with rice wastes the same precautions should be followed as when working with other flammable dust.

Conclusions and Outlook
Rice husk, bran, and straw are often considered low-value waste. However, agriculture, energy generation and storage, pollution control and water treatment, construction materials, and many other vital valorization processes have already been adopted for them. Consequently, to implement these options, the legal requirements governing their disposal methods should be considered. Figures 7, 9 and 13 illustrate rice straw, bran, and husk valorization options. These lignocellulosic materials do, however, have further potential applications. As science and technology improve, identification of many more applications is anticipated as the scientific community and societies become more concerned with sustainability. According to the analysis of relevant research that has already been carried out, rice straw has considerable potential as a renewable energy source. However, there is a significant research gap in using rice bran biochar as an energy storage material. Additionally, modified rice husk biochar has a high promise as an adsorbent in the bio-based water treatment industry. Therefore, further research and development are needed to fill these gaps permanently. In the future, these by-products are expected to be used in fields such as the pharmaceutical industry, space science, etc. Most approaches are anticipated to take place in very small-scale operations, particularly if governments adopt a rural development strategy to halt urbanization, and non-scientific variables might judge the usefulness of research. Therefore, the present review mainly discusses the economics of different procedures. However, in the end, the conclusions about specific applications must be made by politics. For example, taxes or laws can be used to encourage each type of activity, while traditional activities such as burning straw and husk are intended to be discontinued. This will lead to laws that make alternative ways of doing things more fascinating.

Data Availability Statement:
The data presented in this study are available on request from the corresponding author.