The Basic Theorem of Temperature-Dependent Processes

: The basic theorem of isokinetic relationships is formulated as “if there exists a linear correlation “structure ∼ properties” at two temperatures, the point of their intersection will be a common point for the same correlation at other temperatures, until the Arrhenius law is violated”. The theorem is valid in various regions of thermally activated processes, in which only one parameter changes. A detailed examination of the consequences of this theorem showed that it is easy to formulate a number of empirical regularities known as the “kinetic compensation effect”, the well-known formula of the Meyer–Neldel rule, or the so-called concept of “multi-excitation entropy”. In a series of similar processes, we examined the effect of different variable parameters of the process on the free energy of activation, and we discuss possible applications.


Introduction
Exponential models of the temperature dependence of the properties of certain processes appeared in the scientific literature as early as the end of the 19th century.Such a functional dependence was proposed by Reynolds (1884) to describe the change in viscosity as a function of temperature.Almost at the same time, Arrhenius assumed (1889) similar equations for the temperature dependence of reaction rates.Now, exponential functions are the most important and widespread functions in physics, chemistry and biology.
However, attempts to find any non-exponential dependence of the rates of chemical reactions on temperature continue to this day.For example, to improve the description of the temperature dependence of the rate constants for functions that differ from Arrhenius' theory, work based on empirical two-parameter functions with two "non-Arrhenian" temperatures was performed [9][10][11][12][13][14].However, these models and aspects are not the focus of this review.
Empirical models of processes usually work for a limited range of temperatures, and are expressed in a universal form or the universal Arrhenius equation [15]: where ϕ(T) is, as a rule, the rate of a thermally activated process; k B is the Boltzmann constant; E A is the sensitivity of the process to the temperature or the activation energy (in the case of reaction rates).The physical meaning of all the above-named exponential dependencies becomes more obvious from the point of view of statistical physics.The model presented (Equation ( 1)) has a striking similarity to the Gibbs canonical distribution formula.In this sense, the function ϕ(T) and, precisely, the exponential factor represent the probability of the existence of a state of a thermodynamic system, with the energy E A , in thermal equilibrium with a heat bath (the environment) at a fixed temperature T. Furthermore, if this state is a transition state, the above exponential dependency then reflects the probability that a system can transition along a reaction coordinate, or in other words, it reflects the probability of a process proceeding at different temperatures.This is only true if, and only if, the system reaches a point of no return at this state, which is an explicit assumption (no-recrossing assumption) in classical chemical thermodynamics such as the Eyring-Polanyi theory.
The most intensive use of the universal Arrhenius Equation (1) began in the field of physical organic chemistry, namely, in chemical kinetics, making it the basic equation of chemical kinetics.Since the middle of the twentieth century, a quantitative approach to the interpretation of reaction mechanisms began to develop [16][17][18].Here, we are talking about the correlation analysis of the relationship between the rate constants of some series of reactions and certain parameters of the reaction medium or the physicochemical properties of the reactants involved [19,20].The use of regression analysis with the help of the so-called QSAR models (models of quantitative structurally active relationships) made it possible to perform a unified quantitative characterization of a series of similar reactions [21], or the influence of solvents according to Edwards [22], 24] and many others.Many linear correlation dependencies appear that connect the properties (in particular, the reactivity) of a single series of chemical compounds with parameters that uniquely correspond to the structural features of this series.The prototype of the majority of correlations is the Brönsted equation, which establishes a quantitative relationship between the strengths of acids and bases and their catalytic activity [25].There appeared correlation dependencies of Hammett [17] and , based on the same principlethe relationship between the structure and reactivity.Subsequently, many variations of the above-mentioned correlation equations appeared, such as the Swain-Lupton equation [29] and Yukawa-Tsuno equation [30].Similar correlations are widely used to describe the influence of certain parameters, generalized (e.g., the nature of the substrate or properties of the medium) in a series of thermally activated processes when this parameter is changed.In this case, the variable (T) in Equation ( 1) is a function of two parameters, the temperature and the variable parameter (Equation ( 2)): The correlation analysis of the temperature dependencies of different processes using the two-parameter Equations ( 1) and ( 2) made it possible to reveal another regularity for which statistical physics cannot answer the question of the reasons for its existence.This is the so-called "compensation effect".This concept covers such regularities as, for example, the establishment of a relationship between the numerical values of the exponent and the pre-exponent, among which are the Barclay-Butler rule [31], the theta rule [32], the Smith-Topley effect [33], the Constable-Cremer relation [34,35], and many others.
Particularly widespread was the establishment by Meyer and Neldel of the fact that the logarithm of the pre-exponential coefficient (or "factor") vs. E A exhibits very good correlation in certain series [36].The mentioned relation is known as the Meyer-Neldel rule (MNR), which opened up new possibilities for a further step in development, especially in theoretical physical chemistry [37,38].A general form, Equation (3), expresses the MNR as follows: Here, A 00 is a constant pre-exponential factor, and EMN is the so-called Meyer-Neldel energy.In turn, Equation (4) expresses the Meyer-Neldel energy (E MN ).
where T iso is an isokinetic temperature determined by the Meyer-Neldel energy and represents a temperature at which all the processes of a certain series are insensitive to variation of the parameter σ [39].All the above-mentioned correlations reflect the fundamental principle of physical organic chemistry-the linearity of the dependencies of free energies, LFER (a linear free-energy relationship) [40,41], or according IUPAC-Gibbs energy relation [42].Mathematically, the LFER principle generalizes the correlation dependencies considered above as the relationship between enthalpy (∆H = ) and entropy (∆S = ) in the form of Equation ( 5): In accordance with the recommendations of IUPAC (IUPAC Recommendations 1994), it was called an "isokinetic relationship", or "compensation effect", and parameter (β) was called the "isokinetic temperature", i.e., β = T iso (see Equation ( 5)).In heterogeneous catalysis, this correlation is often referred to as "the kinetic compensation effect" [43].
The idea of the "kinetic compensation effect" was developed back in 1938 [44,45] and has been elaborated in a number of articles; especially noteworthy is the review by Koga [46].Moreover, kinetic compensation effects were obtained analytically by Roura and Farjas [47], and particularly interesting is the work by Holba [48] and very recent work [49,50].
Quite often, relation Equation ( 5) is replaced (not arising analytically) by another Equation (6), which represents, in essence, the same: where A 0 is the pre-exponential factor of the Arrhenius equation and E A is the Arrhenius energy.
The idea of a compensation of "entropy∼enthalpy" proved to be very fruitful for numerous situations related to chemistry, biology or, precisely, biochemical reactions, and materials science [51][52][53].Biochemists perceived the presence of isokinetic correlations with particular enthusiasm, since the linear approximation ∆H = vs.∆S = for complex biological systems offers a simple and successful interpretation of the mechanisms of interaction of reagents [54][55][56][57].
At the same time, the authors of many articles emphasize that it is necessary to distinguish correlations that are purely mathematical in nature and those that have a physical meaning [58,59].However, a statistical analysis of numerous correlations has shown that experimental errors cannot be the basis of this phenomenon, and therefore, it can serve as a good tool for determining the nature of the processes that occur [60][61][62][63].For interpreting the kinetic data of chemical reactions, it was suggested that the isokinetic relationship is a result of a certain energy resonance between the reacting molecules and their environments [41].The isokinetic temperature can be interpreted as an active vibrational frequency of the surroundings of the reaction site.The corresponding frequency was found in the vibrational spectra of the solvent in the case of liquid-phase reactions [64][65][66].In the case of heterogeneous reactions, the resonance interaction can occur between the quantum of the catalyst vibration and the quantum of the reactant vibration [67,68].On all these occasions, the activation energy is expressed as a sum of the vibrational quanta of a vibrational mode that will bring the molecule to reaction [67].It has been suggested that the observation of isokinetic relationships is evidence in favor of an identical reaction mechanism for a series of related reactions [69].In the case of other temperature-dependent physical processes, the physical origin of the Meyer-Neldel rule is still not well explained.However, everyone agrees that there is an explanation, namely, the exponential distribution of activation barriers [15,[70][71][72][73].In this way, in spite of the fact that both the MNR and concept of the isokinetic relationship are widely used, the microscopic origin of the MNR and, therefore, the physical meaning of the EMN are still a topic of discussion in the literature [74][75][76].Many authors look forward to further developments in this interesting and important area [77].One of the steps in this direction is the proof of the existence of a basic theorem of the isokinetic relationship (vide infra).

Discussion
As can be concluded from the above review, many series of similar physical processes, including a series of chemical reactions of one and the same type, are described not only by exponential functions of the type of Equation (1).They also correspond to the concept of the "compensation effect" or, in particular, "isokinetic relations" in accordance with Equation ( 3).Here, it should be noted that the validity of this concept refers, apparently, to all physically temperature-dependent processes, or at least to all the elementary stages of any complex reaction mechanism.Generally, chemists talk about the isokinetic relation in terms of the importance of the isokinetic (or isoequilibrium) temperature, condensed matter physicists and material scientists use the Meyer-Neldel rule, and biochemists use the compensation effect or rule.For the convenience of understanding the further material, let us return to the more familiar form for chemists' designation of the process characteristic-the reaction rate constant: However, we will consider a more generalized case in which the functional dependence of this constant, k(T,σ), on temperature is expressed by Equation ( 1), and the preexponential factor A 0 is insensitive to temperature.This consideration covers all cases falling under the description of the Meyer-Neldel rule but is somewhat divergent from the Eyring-Polanyi transition state theory [78].The dependence of the exponential factor A 0 on the temperatures can be neglected for several reasons.The general form of the Eyring-Polanyi equation resembles the Arrhenius equation: where ∆G = is the Gibbs energy of activation, χ is the transmission coefficient, k B is Boltzmann's constant, and h is Planck's constant.It should be noted that the transmittance (χ), the value of which is arbitrary, often evens out the influence of another cofactor-the temperature.Both cofactors are included in the pre-exponential coefficient of Equation ( 8) as one effective coefficient, which does not depend much on temperature.The main reason is that the Eyring-Polanyi theory is very difficult to apply to other (except for chemical kinetics) thermally activated processes.The two-parameter Equation (3) in logarithmic form can be represented graphically either by the temperature dependence of the slope of an "σ-parameter line" or by the σparameter dependence of the slope of an "Arrhenius line".In the first case, we are talking about typical LFER correlations ("structure-properties"), such as Hammett diagrams, the influence of solvents and so on.In the second case, we refer to typical Arrhenius diagrams for a series of similar reactions with a variable parameter (σ).The relationship between these two representations is shown in Figure 1 using the form of an open-book doublediagram [79] (Figure 2 in [66]).Since both diagrams are based on the same data, the rate constant of the process for a certain parameter i and certain temperature T i , they can be considered as projections of a three-dimensional space figure in the corresponding two-dimensional planes.
Temperature dependence of a well-behaved linear free-energy relationship (LFER).Left-hand side: Arrhenius plot.Introduction of the isokinetic parameter σ(iso) would make the specific rate, k(iso), insensitive to temperature (upper broken line).Right-hand side: σ-correlation plot.At the isokinetic temperature, T iso , the specific rate, k(T iso ), is insensitive to parameter variation.Figure is adapted from R. Schmid et al. [79].
It is obvious that the point of intersection of the lines on both plots reflects the same value and corresponds to the isokinetic case.The Arrhenius diagram (left-hand side plot) shows the intersection point, k σ(iso) , when the values of the rate constants k(T, σ) at T iso are the same and are insensitive to parameter variation, σ I (for example x, y, and z).The LFER-correlation plot (right-hand side) shows the intersection point when the values of the rate constants, k(T, σ), at T iso are insensitive to temperature.In other words, for the process with the σ iso parameter, the Arrhenius activation energy is equal to zero.The slopes of the lines in the LFER diagrams are interpreted as a measure of the sensitivity of the process to variable parameters, σ I , although their values characterize the closeness of the actual temperature of the process to the isokinetic temperature T iso .
Usually, the experimental realization of the process at (or near) the isokinetic temperature (T iso ) is not particularly difficult; then, the process with the isokinetic parameter (σ iso ) is most often impossible.In this case, we should use the theorem that says: "if there exists a linear correlation for "structure-properties" at two temperatures, the point of their intersection will be a common point for the same correlation at other temperatures, until the Arrhenius law is violated".To prove the theorem, we consider the right-hand side plot in Figure 1 separately, which is a typical case of an LFER σ-correlation plot in the Arrhenius equation approximation presented in Figure 2.
This shows a plot of two conditional experimental dependencies, f(T 1 ) and f(T 2 ), of one series of experiments, obtained for the temperatures T 1 and T 2 , respectively.The abscissa reflects the characteristic values of the variable parameter σ 1 in the process.The lines intersect at point [0], which corresponds to the parameter σ iso and the logarithm of the rate constants k(T i , σ iso ) at any temperature T i .According to the theorem, the experimental points obtained at other temperatures must be on straight lines (for example, straight lines f (T 1 ), f (T 2 ) or f (T iso ) that also pass through point [0]).
Figure 2. The LFER-correlation plots of f (T1) to f (T4) and f (T iso ) of one series of conditional experiments with variable parameters σ i in the temperature range T 1 to T 4 , including T iso , respectively.Groups of points A 1 , A 2 , and A 3 , A 4 correspond to processes with parameters σ 1 and σ 2 at temperatures of T 3 and T iso .
To prove the theorem, we draw a horizontal line through the point [0] and consider two triangles, ∆(A 1 , A 2 , 0) and ∆(A 3 , A 4 , 0).The tangent of the acute angle α at the vertex (0) in this triangle is expressed by Equation (9): If we now replace the letter designations with the corresponding parameters of the Arrhenius equation, we obtain Equation (10): where E σ 1 and E σ 2 are the Arrhenius activation energies for the reactions at parameters σ 1 and σ 2 , respectively.It is not difficult to verify that we obtain such equations when considering LFER σ-correlation plots for other temperatures (lines f (T 2 ), f (T 3 ), f (T 4 ) and so on).On the one hand, for any temperature, T i , we get the tangent of the angle of a straight line between two points located on verticals reconstructed from points σ 1 and σ 2 on the abscissa, respectively, which passes through point [0].The horizontal line taken from the point [0] turns out to be f (T iso ), which corresponds to the process at T iso and whose logarithm of rate constants k(T iso , σ i ) does not depend on the parameter σ i .
On the other hand, the point [0] corresponds to the logarithm of the rate constant k(T iso , σ iso ) for σ iso and T iso , and to the logarithms of the rate constants k(T i , σ iso ) for σ iso and any temperature T i .
The above discussion shows that all linear correlations of the same type of processes obtained at different temperatures will intersect at one point until the Arrhenius law is violated.The establishment of this fact can be regarded as a proof of the above theorem as a "basic theorem of isokinetic relationships".

Interpretation of Known Empirical Regularity
The main conclusion of the theorem can be considered the obtaining of equalities reflected by Equation (11).We see that there is an equality: As the Arrhenius activation energy for the process with the σ iso parameter is equal to zero, the rate constant of the process is expressed by the pre-exponential factor only (Equation ( 12)): ln(k(T iso , σ iso ) ≡ ln(A 0 (σ iso )) where A 0 (σ iso ) is the pre-exponential factor in the Arrhenius equation at parameter σ iso .Moreover, from Equation (11), we can derive a number of known empirical rules and laws.For example, from the combination of Equations ( 11) and ( 12), we can obtain: This equation is easily transformed into a more familiar form of the relation (Equation ( 6)), often called the "kinetic compensation effect" [43]: This equation can serve as a basis for the derivation of some solid empirical rules.If we add to two parts of Equation ( 14) the energy term − , we obtain the following expression: which can be easily transformed into the well-known Meyer-Neldel rule (MNR) or Alternatively, if Equation ( 14) is expressed in terms of Eyring-Polanyi, we obtain an expression often used to explain the concept of "multi-excitation entropy" [65,80,81].Specifically, A. Yelon et al. argue that a large number of excitations may be collected in a large number of ways and that this multiplicity gives rise to entropy: The authors have called the first term in Equation ( 18) a barrier entropy, and the second term, the multi-excitation entropy.Equation (14), expressed in terms of Eyring-Polanyi, practically coincides with the equation that A. Yelon proposed as follows: We can shed light on the physical meaning of the terms in the Yelon Equation (18).The barrier entropy is the entropy of the process with the parameter σ iso when the Arrhenius activation energy is zero.In other words, any process passes without an energy supply from the outside if the value of its entropy has reached the barrier entropy.Otherwise, a process passes with energy feeding from the outside, and this energy must compensate for the lack of entropy to its baseline value (barrier entropy).Such feeding of energy is provided in the form of multi-excitation entropy, which is part of the activation entropy.As T i approaches T iso , for any parameter σ i , or as the parameter σ i approaches σ iso , independently of the temperature, the multi-excitation entropy decreases to zero.Apparently, this is precisely the effect of the compensation "enthalpy-entropy".
Thus, in the course of the proof of the theorem, we obtained a direct relationship with linear correlation dependencies reflecting the LFER (a linear free-energy relationship) principle and their energy parameters, the isokinetic relationship or compensation effect.In addition, the consequences of the theorem enable us to understand the physical meaning of certain empirical regularities.Equally interesting and useful in a practical sense is considering the regions diagram shown in Figure 2. It is about the patterns of change in the same type of processes in which the operating temperature (T i ) changes in regions before and after T iso , or in which the parameter σ i changes in regions before and after σ iso .

The Effect of the Temperature on the Impact of Variable Parameter σ i
The first correlations that appeared in the scientific literature, as a rule, did not cover the temperature range or a range of process parameters (σ i ), close to either the T iso or to σ iso .With increasing interest, especially in the field of heterogeneous catalysis, the operating temperature ranges or parameters expanded and experiments appeared near or even on the other side of the "isokinetic" temperature, T iso [82,83].Upon reaching the reaction temperature, T iso , the effect of the varied parameter σ i level due to the mutual compensation of entropy (T iso ∆S = ) and enthalpy (∆H = ) in the free energy of activation (∆G = ) correspond to the process at f (T iso ) (Figure 2).
A further change in the reaction temperature leads to the fact that the contributions of these constituents of the free activation energy again become different.In this way, during the transition of operating temperatures through T iso occurs a complete inversion of the influence of the parameters (compare the lines of f (T 3 ) and f (T 4 ) in Figure 2).This results, for example, in the order of the influence of the substituents in pyridines, which catalyze the reaction of phenyloxirane with nitrobenzoic acid [84,85].A similar fact was established when studying the activity of a number of heterogeneous catalysts [86] or enzymes [87].Many authors consider such an inversion of the influence of the variable parameter σ i as a change in the mechanism of the process, whereas in reality, this is only a "game" of thermodynamic activation parameters [88].
Here, we can formulate the following conclusion of the theorem: the order of the effect of the variable σ i in a series of reactions of the same type reverses during the transition of the operating temperatures through T iso .We want to emphasize that this conclusion arises from a mathematical analysis of the obtained dependencies, assuming that they are preserved when passing through a point T iso .To date, there is almost no experimental evidence for this [84][85][86][87], and more experimental evidence is clearly needed.

The Effect of the Variable Parameter σ i on the Free Energy of Activation
The revealed regularity of the changing of the order of the effect of variable σ i is preserved for a given series of experiments up to σ iso .It should be noted that with this change in the effect of σ i on the process, the activation energy decreases.These results indicate that the entropy difference between the transition and the ground states contributes significantly to the free energy of activation.In such cases, one can establish the decisive role of entropy in the free Gibbs activation energy ∆G = [89,90].In most cases, this is established for biochemical processes, [91,92] or for heterogeneous catalytic processes [93].
For a process with an isokinetic parameter σ iso , the effect of temperature is equalized, and the Arrhenius activation energy is zero (see Equation ( 13)); i.e., only the entropy control of the reaction remains (Equation ( 20)): The free activation energy does not include the enthalpy term at all and consists only of an entropy term; i.e., in contrast to the premises of Arrhenius, those particles that have the required Gibbs activation energy ∆G = enter the chemical interaction [35,89].

The Negative Activation Energies
Another poorly understood area of the isokinetic relationship relates to experimental data relating to the study of the temperature effect on a series of reactions near the isokinetic parameter σ iso and on the other side of it (Figure 2).If the linearity of the correlation is maintained, the course of the correlation curves must correspond to a negative activation energy.
Reactions with negative activation enthalpy are generally considered to have a preequilibrium.In this case, the negative effect of temperature affects the position of the preliminary equilibrium with the formation of an intermediate.If the process of equilibrium formation of the intermediate is exothermic, then as the temperature rises, the concentration of the intermediate product decreases more than the rate of the main reaction, thus imitating the effect of a negative activation energy [94].
This case, apparently, cannot be considered, since the process speed is not determined by one exponential dependence, such as Equation ( 1), since the total activation energy is a function of three processes [95].
However, simple reactions with a negative activation energy (so-called anti-Arrhenius kinetics or anti-Arrhenius behavior [96]) are still possible and occur [97].Such reactions are a consequence in the fields of radical chemistry and atmospheric science [98][99][100].Often, they are considered barrier-free reactions [101,102].The interpretation of the unusual temperature dependence requires considerations that extend beyond the purely enthalpic ones that are commonly presented in undergraduate text books; it is also necessary to take into account entropic factors that influence the fate of the reaction intermediate(s) [94,103].
It is believed that an elementary reaction may exhibit a negative enthalpy of activation if the reaction entropy is negative enough [104].This situation is more common for enzymatic reactions, i.e., enzyme catalysis [105,106].Anti-Arrhenian behavior is connected with the conformational structure of the protein, which promotes the contact during its fragments' interaction [107].In all cases, against the background of reducing the enthalpy of activation in the form of the Arrhenius energy and even the appearance of its negative value, the entropy component of the free energy of activation is a dominant factor in the implementation process.
To interpret the process, it is obviously not enough to consider it only in terms of thermal energy.It is necessary to consider the potential component-the change in the entropy of the process, i.e., creating the conditions that are most suitable for the necessary change in the geometry when the system goes from one state to another.An increase in temperature leads to a decrease in the probability of colliding molecules falling into each other, or to difficulty in forming new connections, expressed as the cross section of the process, which decreases with increasing temperature.This, apparently, is the basis for the emergence of such concepts as exergonic and endergonic processes.The names describe what happens with any form of free energy during the process, while endothermic and exothermic relate only to heat or thermal energy.
Summing up, it can be stated that the negative value of the activation entropy is inherent in processes when the temperature increases all the degrees of freedom while it does not allow accepting the necessary configuration for a barrier-free transition to a new state.To complete the process, the system must transmit some energy to the external environment, i.e., a typical exergonic process.

Outlook and Possible Applications
Although the presence of an isokinetic ratio or enthalpy∼entropy compensation along with the observation of the Meyer-Neldel rule has been observed for a long time in various regions of thermally activated processes, there is still no single model for this phenomenon.
In each case, various plausible models have been proposed.The explanation of phenomena in terms of statistical thermodynamics did not lead to success [77,108].
The approach based on the exponential density distribution of states that induces a shift at the Fermi level is very general, but it cannot be a universal explanation for the MNR [109].Among the explanations, the more acceptable idea is the notion of a certain energy resonance between the reacting molecules and their environment [41].The idea brilliantly interprets the essence of the compensation effect in chemical reactions, but it is not suitable for explaining the temperature dependence of other processes, such as conductivity, glass crystallization, etc.
In the latter cases, many authors believe that the Meyer-Neldel compensation in these systems is a joint consequence of (1) the existence of localized states and (2) the energy dependence of the electron-phonon coupling [110] and is associated with a breach of any form in amorphous materials (glasses) because of their short-range structural orders [74,111].
In our opinion, the similarity of all the mentioned temperature-dependent processes and a universal explanation for the MNR must be based on the decisive role of the entropic factors of the process.All the cases of temperature-dependent processes and the observance of the MNR rule in them are ultimately connected with the geometric reorganization of the reacting system and the cost of this rearrangement of the corresponding energy from the outside.Summarizing what was said above, we established that in all cases, it is a question of mutual compensation for the change in entropy by an external source of energy.
For clarity and simplicity, let us consider chemical processes.Above, we obtained a generalized model of similar processes with a single parameter change.It has the form of Equation (17).The transformation of this model from the point of view of the Eyring-Polanyi theory can be represented in the form of the following equation: where ∆G = (T i , σ i ) is the Gibbs free activation energy for a reaction at the temperature T i and parameter σ i ; ∆G = (T i , σ iso ) is the Gibbs free activation energy for the reaction at parameter σ iso ; ∆H = (σ i ) is the activation enthalpy for the reaction at parameter σ i .The last term on the right-hand side of Equation ( 21) is part of the total activation entropy of the process in terms of a Gibbs free activation energy ∆G = (T i , σ i ), which depends on the parameter σ i .We denote it as Combining Equations ( 21) and ( 22) provides a very important result, which is that the Gibbs free activation energy of the process consists of two parts.
The first part in Equation ( 23) is defined as the free Gibbs activation energy of a barrierfree process at parameter σ iso , which remains constant for the entire series of processes with different parameters σ i , and consists of only one activation entropy term as follows: On the contrary, the second part is the variable unit of the Gibbs free activation energy of the process at the temperature T i and parameter σ i : Here, both components (enthalpy and entropy) depend on the parameter σ i , the effect of which reduces to a change in the pumping of energy from the outside.
On the other hand, it is easy to understand that the total activation entropy also consists of two parts, the first of which corresponds to the activation entropy ∆S = (T i , σ iso ) and remains constant for the whole series of processes with parameters σ i : The compensation of entropy∼enthalpy (22) implies that the variable part of the entropy, i.e., ∆∆S = (σ i ), must be greater than zero.This corresponds to an increase in the degrees of freedom of the reaction system (an increase in the "disorder" of the system) during the formation of the activated complex.Apparently, this excess part of the activation entropy does not allow the reacting system to reach the reaction conditions.To increase the degree of order in the system, it is necessary to expend energy by introducing it from outside as an enthalpy of activation, and as much as necessary to compensate for the increased entropy.
The effectiveness of the parameter σ i is reduced to a change in a variable part of entropy, that is, a change in the degrees of freedom of the system.When the process is performed with an isokinetic parameter (σ i → σ iso ), the system acquires the required structure of the degrees of freedom and does not require additional energy (in the form of enthalpy), and Equation ( 25) becomes zero.
In other words, the normal vibrations of the reacting system coincide with the vibrations of the activated complex.In Figure 3, this is indicated for the example of a transition-state structure of the reaction between the radical PINO• and cumene.As a result of this resonance, the amplitude of these oscillations increases sharply, and, since chemical bonds are weakened, conditions are created for the appearance of "imaginary" oscillations of the activated complex.This corresponds to conditions for the passage of the reaction system through the activation barrier without the activation energy.
The total free activation energy (Equation ( 17)) becomes equivalent to ∆G = (σ iso ), which allows the process with zero activation energy to proceed.If the process is performed with the parameter σ i = σ iso , the system needs energy from outside.When the reaction temperature approaches the isokinetic temperature, the need for this disappears, and with T i → T iso , the effects of entropy and enthalpy are compensated for, and the free energy of activity becomes ∆G = (σ iso ).At the isokinetic temperature, the complete compensation of the entropy and enthalpy takes place; that is, the second term in Equation (23) reduces to zero.
We have only considered the regularities that accompany a series of one-parametric chemical processes.However, the foregoing reasoning will remain the same when considering a series of other physicochemical or physical-temperature-dependent and oneparameter processes (Ψ(T i , σ i )) if we consider that they are also determined by the change in the Gibbs free activation energy defined as follows: Ψ(T i , σ i ) is the pattern of a thermally activated process, k B is the Boltzmann constant, and α is a coefficient of proportionality.∆G = (T i , σ i ) is the Gibbs free activation energy for a process at the temperature T i and parameter σ I , in accordance with Equation (23).
For any such series of experiments, the effect of the parameter is reduced to the effect on the Gibbs free activation energy, changing the necessary pumping of energy from the outside.In this case, a situation (at least theoretical) is possible where the system ceases to need additional energy.In this case, the free activation energy consists only of the entropy term (Equation ( 24)).In all other cases, the energy is pumped through the variable part of the free energy ∆∆G = (T i , σ iso ), represented by Equation (25), for the process to proceed.When the isokinetic temperature is reached, with T i → T iso , the effects of entropy and enthalpy are compensated for, and the free energy of the activity becomes ∆G = (σ iso ).

Conclusions
In this review, we discussed the universal applicability of Arrhenius' law, as the key equation of the theory of the temperature dependence of the flow of various chemical and physical processes.We understand that the linearization of thermodynamic parameters can be carried out in a very restricted range, deviations being well studied and quantitatively accounted for once the temperature range confining the system is known [112].Still, the regularities of the relationships of thermodynamic functions, even in narrow ranges, provide insight into various phenomena.These include the "tunnel effect", where near the "isokinetic" parameter of the process, the course loses its dependence on temperature or there is change in the influence of process parameters in an opposite manner when passing a certain temperature (T iso ).
We believe that the idea of a correlation analysis of temperature-dependent processes will provide insight into various processes including electrochemical reactions, molecular interactions and specific interactions such as ligand/receptor binding.How the variable parameter changes will allow finding regions with the maximum or minimum effect of temperature on the process under study.

Figure 3 .
Figure 3. Resonance structure of the activated complex of a reaction of the radical PINO• and cumene.