Electrophilic Iodination of Organic Compounds Using Elemental Iodine or Iodides: Recent Advances 2008–2021: Part I

The iodination of organic compounds is of great importance in synthetic organic chemistry. It opens comprehensive approaches for the synthesis of various biologically active compounds. The recent advances in iodination of organic compounds using elemental iodine or iodides, covering the last thirteen years, are the objective of the present review.


Introduction
The introduction of iodine as an available, inexpensive, environmentally friendly element into organic molecules has attracted a significant interest providing versatile building blocks in synthetic organic chemistry [1]. Iodine compounds have widespread use in organic chemistry. Iodinated compounds are frequently used as reagents in organic synthesis [2]. The best choice for the iodination of organic compounds is the use of molecular iodine or the iodide anion in combination with environmentally friendly and atom-efficient oxidants in the presence of desirable solvents or under solvent-free protocols, thus enhancing the green chemical profile of the iodination process [3]. Molecular iodine is extensively employed for α-iodination of alkyl carbonyl compounds [4]. It could act as a catalyst promoting enolisation and as a reagent reacting with enol to afford α-iodocarbonyl compounds [5]. Comprehensive synthetic protocols for electrophilic iodination of organic compounds employing I 2 or I − were reviewed by Stavber and co-workers in 2008 [6]. The reports covered by this review [6] mainly carried low green chemical profiles, thus challenging greener-related protocols. Thus, in the present review, as part I of the matter, related protocols have been elaborated to highlight recent advances in the iodination of organic compounds, including alkanes, alkenes, alkynes, and alkyl carbonyls using elemental iodine or iodides, covering the period from 2008-2021.

Iodination of Alkanes
In 2008, Sudalai and co-workers [7] presented NaIO 4 /KI/NaN 3 an efficient system for mono-and 1,2-difunctionalization of hydrocarbons through activation of C-H bond, providing vicinal azido-and acetoxy iodinations of cyclic hydrocarbons in high yields (Scheme 1). This protocol is successful for acyclic and cyclic alkanes. the green chemical profile of the reaction establishing an environmentally friendly

Iodination of Alkenes and Alkynes
The considerably breakthrough in the field of electrophilic iodination of alkenes was achieved already in 2005 [10], where, 30% aqueous H 2 O 2 was used as the oxidant for the iodotransformation. However, later in 2008, Stavber and co-workers [11] even improved the green chemical profile of the reaction establishing an environmentally friendly methodology for aerobic oxidative iodination of alkenes using potassium iodide as iodine source catalyzed by sodium nitrite in acidic media providing the corresponding products in good to quantitative yields (Scheme 5). The authors have reported that the alkene was added as the last reactant to avoid polymerization. Moreover, in the case of phenylsubstituted alkynes (phenylethyne) using MeCN as the solvent, the formation of (E)-1,2diiodo-1-phenyl-1-ethene was observed while, in the case of phenyl-1-propyne, a small Compounds 2022, 2 5 amount of (Z)-1,2diiodophenylethene was also obtained (Scheme 6). The presence of an external nucleophile was observed to be beneficial for efficient and selective reactions. methodology for aerobic oxidative iodination of alkenes using potassium iodide as iodine source catalyzed by sodium nitrite in acidic media providing the corresponding products in good to quantitative yields (Scheme 5). The authors have reported that the alkene was added as the last reactant to avoid polymerization. Moreover, in the case of phenyl-substituted alkynes (phenylethyne) using MeCN as the solvent, the formation of (E)-1,2-diiodo-1-phenyl-1-ethene was observed while, in the case of phenyl-1-propyne, a small amount of (Z)-1,2diiodophenylethene was also obtained (Scheme 6). The presence of an external nucleophile was observed to be beneficial for efficient and selective reactions. Huang and Yang [12] have reported a novel and efficient method for synthesizing iodocyclopropylmethanol and 3-iodobut-3-en-1-ol derivatives via the iodohydroxylation of alkylidenecyclopropanes with I2/H2O system affording ring-opening or ring-keeping products in moderate to excellent yields (Scheme 7).

Scheme 7. Iodohydroxylation of alkylidenecyclopropanes with substituted aromatic rings.
A convenient and eco-friendly method for the synthesis of α-iodoketones from alkenes and alkynes has been reported by Yadav and co-workers [13] using 2-iodoxybenzoic acid (IBX)/I2 as the effective reagent system in water providing the corresponding products in good to high yields (Scheme 8). methodology for aerobic oxidative iodination of alkenes using potassium iodide as iodine source catalyzed by sodium nitrite in acidic media providing the corresponding products in good to quantitative yields (Scheme 5). The authors have reported that the alkene was added as the last reactant to avoid polymerization. Moreover, in the case of phenyl-substituted alkynes (phenylethyne) using MeCN as the solvent, the formation of (E)-1,2-diiodo-1-phenyl-1-ethene was observed while, in the case of phenyl-1-propyne, a small amount of (Z)-1,2diiodophenylethene was also obtained (Scheme 6). The presence of an external nucleophile was observed to be beneficial for efficient and selective reactions. Huang and Yang [12] have reported a novel and efficient method for synthesizing iodocyclopropylmethanol and 3-iodobut-3-en-1-ol derivatives via the iodohydroxylation of alkylidenecyclopropanes with I2/H2O system affording ring-opening or ring-keeping products in moderate to excellent yields (Scheme 7).

Scheme 7. Iodohydroxylation of alkylidenecyclopropanes with substituted aromatic rings.
A convenient and eco-friendly method for the synthesis of α-iodoketones from alkenes and alkynes has been reported by Yadav and co-workers [13] using 2-iodoxybenzoic acid (IBX)/I2 as the effective reagent system in water providing the corresponding products in good to high yields (Scheme 8). Huang and Yang [12] have reported a novel and efficient method for synthesizing iodocyclopropylmethanol and 3-iodobut-3-en-1-ol derivatives via the iodohydroxylation of alkylidenecyclopropanes with I 2 /H 2 O system affording ring-opening or ring-keeping products in moderate to excellent yields (Scheme 7). methodology for aerobic oxidative iodination of alkenes using potassium iodide as iodine source catalyzed by sodium nitrite in acidic media providing the corresponding products in good to quantitative yields (Scheme 5). The authors have reported that the alkene was added as the last reactant to avoid polymerization. Moreover, in the case of phenyl-substituted alkynes (phenylethyne) using MeCN as the solvent, the formation of (E)-1,2-diiodo-1-phenyl-1-ethene was observed while, in the case of phenyl-1-propyne, a small amount of (Z)-1,2diiodophenylethene was also obtained (Scheme 6). The presence of an external nucleophile was observed to be beneficial for efficient and selective reactions.
Selected products: By treatment of the reaction mixture with an anionic exchange resin, pure iodo-functionalized products were provided. Unreacted m-iodosylbenzoic acid and reduced m-iodobenzoic acid are regenerated from the resin by treatment with HCl.
A simple, efficient, and practical method for the iodination of alkynyl enolates has been described using allenoates as the starting material through an alkynyl enolate as the intermediate. The reaction of the silyl ether of alkynyl enolate with iodine provides iodoallenoate in good yield [15]. Grigg and co-workers [16] developed a protocol for the synthesis of 1-C-(tetra-O-acetyl-β-D-galactopyranosyl)-2,3-diiodo-1-propene using β-Cgalactose allene as a starting material with iodine in the presence of ethanol as a solvent (Scheme 12). Scheme 12. The reaction of β-C-galactose allene with I2.
A convenient method for synthesizing of vicinal halohydrins, haloacetates, and halo methyl ethers from olefins with 2:1 I − /IO − 3 has been described [17]. Iodo reagent was found to be better for reaction with linear alkenes and the elimination of diiodo impurity (Scheme 13). I − /IO Iodofluorination of electron-deficient olefins such as α,β-unsaturated esters, phosphonate, and amides with iodonium cation species generated by the anodic oxidation of iodide anion in Et3N-5HF/MeNO2 has been reported [18], providing the corresponding iodofluorinated products in good to moderate yields (Scheme 14). A convenient method for synthesizing of vicinal halohydrins, haloacetates, and halo methyl ethers from olefins with 2:1 I − /IO − 3 has been described [17]. Iodo reagent was found to be better for reaction with linear alkenes and the elimination of diiodo impurity (Scheme 13). I − /IO − 3 was not successful for the vicinal functionalization of chalcones and stilbene.
By treatment of the reaction mixture with an anionic exchange resin, pure iodo-functionalized products were provided. Unreacted m-iodosylbenzoic acid and reduced m-iodobenzoic acid are regenerated from the resin by treatment with HCl.
A simple, efficient, and practical method for the iodination of alkynyl enolates has been described using allenoates as the starting material through an alkynyl enolate as the intermediate. The reaction of the silyl ether of alkynyl enolate with iodine provides iodoallenoate in good yield [15]. Grigg and co-workers [16] developed a protocol for the synthesis of 1-C-(tetra-O-acetyl-β-D-galactopyranosyl)-2,3-diiodo-1-propene using β-Cgalactose allene as a starting material with iodine in the presence of ethanol as a solvent (Scheme 12). Scheme 12. The reaction of β-C-galactose allene with I2.
A convenient method for synthesizing of vicinal halohydrins, haloacetates, and halo methyl ethers from olefins with 2:1 I − /IO − 3 has been described [17]. Iodo reagent was found to be better for reaction with linear alkenes and the elimination of diiodo impurity (Scheme 13). I − /IO Iodofluorination of electron-deficient olefins such as α,β-unsaturated esters, phosphonate, and amides with iodonium cation species generated by the anodic oxidation of iodide anion in Et3N-5HF/MeNO2 has been reported [18], providing the corresponding iodofluorinated products in good to moderate yields (Scheme 14). Iodofluorination of electron-deficient olefins such as α,β-unsaturated esters, phosphonate, and amides with iodonium cation species generated by the anodic oxidation of iodide anion in Et 3 N-5HF/MeNO 2 has been reported [18], providing the corresponding iodofluorinated products in good to moderate yields (Scheme 14).
By treatment of the reaction mixture with an anionic exchange resin, pure iodo-functionalized products were provided. Unreacted m-iodosylbenzoic acid and reduced m-iodobenzoic acid are regenerated from the resin by treatment with HCl.
A simple, efficient, and practical method for the iodination of alkynyl enolates has been described using allenoates as the starting material through an alkynyl enolate as the intermediate. The reaction of the silyl ether of alkynyl enolate with iodine provides iodoallenoate in good yield [15]. Grigg and co-workers [16] developed a protocol for the synthesis of 1-C-(tetra-O-acetyl-β-D-galactopyranosyl)-2,3-diiodo-1-propene using β-Cgalactose allene as a starting material with iodine in the presence of ethanol as a solvent (Scheme 12). Scheme 12. The reaction of β-C-galactose allene with I2.
A convenient method for synthesizing of vicinal halohydrins, haloacetates, and halo methyl ethers from olefins with 2:1 I − /IO − 3 has been described [17]. Iodo reagent was found to be better for reaction with linear alkenes and the elimination of diiodo impurity (Scheme 13). I − /IO Iodofluorination of electron-deficient olefins such as α,β-unsaturated esters, phosphonate, and amides with iodonium cation species generated by the anodic oxidation of iodide anion in Et3N-5HF/MeNO2 has been reported [18], providing the corresponding iodofluorinated products in good to moderate yields (Scheme 14). An efficient route for the aerobic photo-oxidative synthesis of phenacyl iodides from styrenes, H 2 O and I 2 has been reported by Itoh and co-workers [19], providing the corresponding products in moderate to high yields (Scheme 15). An efficient route for the aerobic photo-oxidative synthesis of phenacyl iodides from styrenes, H2O and I2 has been reported by Itoh and co-workers [19], providing the corresponding products in moderate to high yields (Scheme 15).
A simple and efficient method for azidoiodination of alkenes has been reported by Sudalai and co-workers [20] using NaIO4/KI/NaN3 combination. Through an anti-Markovnikov fashion, the regiospecific 1,2-azidoiodination proceeds to give β-iodoazides in quantitative yields (Scheme 16). Scheme 16. Azidoiodination of alkenes mediated by NaIO4/KI/NaN3 system. NaIO4 oxidizes both KI and NaN3 to release I2 and an azide radical, a combination of which gives IN3. Homolysis of IN3 affords an azide radical, which reacts with alkenes to form alkyl radical species. The combination of an alkyl radical with either molecular iodine or iodine radical affords β-iodoazides (Scheme 17). Hanessian and co-workers [21] developed a method for the total synthesis of Jerangolid A (shows antifungal activity) where I2 was used for iodination of lactone in the presence of pyridine in DMF underwent further steps. Kuhakarn and co-workers [22] have described the method for the direct synthesis of β-keto sulfones between the reaction of sodium arensulfinates with alkenes, including styrene derivatives, and aliphatic alkenes mediated by o-iodoxybenzoic acid/iodine (IBX/I2) (Scheme 18).
Compounds 2021, 1, FOR PEER REVIEW 6 An efficient route for the aerobic photo-oxidative synthesis of phenacyl iodides from styrenes, H2O and I2 has been reported by Itoh and co-workers [19], providing the corresponding products in moderate to high yields (Scheme 15).
A simple and efficient method for azidoiodination of alkenes has been reported by Sudalai and co-workers [20] using NaIO4/KI/NaN3 combination. Through an anti-Markovnikov fashion, the regiospecific 1,2-azidoiodination proceeds to give β-iodoazides in quantitative yields (Scheme 16). Scheme 16. Azidoiodination of alkenes mediated by NaIO4/KI/NaN3 system. NaIO4 oxidizes both KI and NaN3 to release I2 and an azide radical, a combination of which gives IN3. Homolysis of IN3 affords an azide radical, which reacts with alkenes to form alkyl radical species. The combination of an alkyl radical with either molecular iodine or iodine radical affords β-iodoazides (Scheme 17). Hanessian and co-workers [21] developed a method for the total synthesis of Jerangolid A (shows antifungal activity) where I2 was used for iodination of lactone in the presence of pyridine in DMF underwent further steps. Kuhakarn and co-workers [22] have described the method for the direct synthesis of β-keto sulfones between the reaction of sodium arensulfinates with alkenes, including styrene derivatives, and aliphatic alkenes mediated by o-iodoxybenzoic acid/iodine (IBX/I2) (Scheme 18). A new route for synthesizing of 5-hydroxypyrrolin-2-one derivatives from the modified Morita-Baylis-Hillman (MBH) adducts through CuI-mediated aerobic oxidation, allylic iodination, hydration of nitrile, and lactamization has been reported [23].
Krasutsky and co-workers [24] have reported the method for electrophilic monoiodination of terminal alkenes (Scheme 19).

Scheme 19. Monoiodination of terminal alkenes.
Scheme 16. Azidoiodination of alkenes mediated by NaIO 4 /KI/NaN 3 system. NaIO 4 oxidizes both KI and NaN 3 to release I 2 and an azide radical, a combination of which gives IN 3 . Homolysis of IN 3 affords an azide radical, which reacts with alkenes to form alkyl radical species. The combination of an alkyl radical with either molecular iodine or iodine radical affords β-iodoazides (Scheme 17).
Compounds 2021, 1, FOR PEER REVIEW 6 An efficient route for the aerobic photo-oxidative synthesis of phenacyl iodides from styrenes, H2O and I2 has been reported by Itoh and co-workers [19], providing the corresponding products in moderate to high yields (Scheme 15).
A simple and efficient method for azidoiodination of alkenes has been reported by Sudalai and co-workers [20] using NaIO4/KI/NaN3 combination. Through an anti-Markovnikov fashion, the regiospecific 1,2-azidoiodination proceeds to give β-iodoazides in quantitative yields (Scheme 16). Scheme 16. Azidoiodination of alkenes mediated by NaIO4/KI/NaN3 system. NaIO4 oxidizes both KI and NaN3 to release I2 and an azide radical, a combination of which gives IN3. Homolysis of IN3 affords an azide radical, which reacts with alkenes to form alkyl radical species. The combination of an alkyl radical with either molecular iodine or iodine radical affords β-iodoazides (Scheme 17). Hanessian and co-workers [21] developed a method for the total synthesis of Jerangolid A (shows antifungal activity) where I2 was used for iodination of lactone in the presence of pyridine in DMF underwent further steps. Kuhakarn and co-workers [22] have described the method for the direct synthesis of β-keto sulfones between the reaction of sodium arensulfinates with alkenes, including styrene derivatives, and aliphatic alkenes mediated by o-iodoxybenzoic acid/iodine (IBX/I2) (Scheme 18). A new route for synthesizing of 5-hydroxypyrrolin-2-one derivatives from the modified Morita-Baylis-Hillman (MBH) adducts through CuI-mediated aerobic oxidation, allylic iodination, hydration of nitrile, and lactamization has been reported [23].
Krasutsky and co-workers [24] have reported the method for electrophilic monoiodination of terminal alkenes (Scheme 19). Hanessian and co-workers [21] developed a method for the total synthesis of Jerangolid A (shows antifungal activity) where I 2 was used for iodination of lactone in the presence of pyridine in DMF underwent further steps. Kuhakarn and co-workers [22] have described the method for the direct synthesis of β-keto sulfones between the reaction of sodium arensulfinates with alkenes, including styrene derivatives, and aliphatic alkenes mediated by o-iodoxybenzoic acid/iodine (IBX/I 2 ) (Scheme 18).
Compounds 2021, 1, FOR PEER REVIEW 6 An efficient route for the aerobic photo-oxidative synthesis of phenacyl iodides from styrenes, H2O and I2 has been reported by Itoh and co-workers [19], providing the corresponding products in moderate to high yields (Scheme 15).
A simple and efficient method for azidoiodination of alkenes has been reported by Sudalai and co-workers [20] using NaIO4/KI/NaN3 combination. Through an anti-Markovnikov fashion, the regiospecific 1,2-azidoiodination proceeds to give β-iodoazides in quantitative yields (Scheme 16). Scheme 16. Azidoiodination of alkenes mediated by NaIO4/KI/NaN3 system. NaIO4 oxidizes both KI and NaN3 to release I2 and an azide radical, a combination of which gives IN3. Homolysis of IN3 affords an azide radical, which reacts with alkenes to form alkyl radical species. The combination of an alkyl radical with either molecular iodine or iodine radical affords β-iodoazides (Scheme 17). Hanessian and co-workers [21] developed a method for the total synthesis of Jerangolid A (shows antifungal activity) where I2 was used for iodination of lactone in the presence of pyridine in DMF underwent further steps. Kuhakarn and co-workers [22] have described the method for the direct synthesis of β-keto sulfones between the reaction of sodium arensulfinates with alkenes, including styrene derivatives, and aliphatic alkenes mediated by o-iodoxybenzoic acid/iodine (IBX/I2) (Scheme 18). A new route for synthesizing of 5-hydroxypyrrolin-2-one derivatives from the modified Morita-Baylis-Hillman (MBH) adducts through CuI-mediated aerobic oxidation, allylic iodination, hydration of nitrile, and lactamization has been reported [23].
Krasutsky and co-workers [24] have reported the method for electrophilic monoiodination of terminal alkenes (Scheme 19).
Compounds 2021, 1, FOR PEER REVIEW 6 An efficient route for the aerobic photo-oxidative synthesis of phenacyl iodides from styrenes, H2O and I2 has been reported by Itoh and co-workers [19], providing the corresponding products in moderate to high yields (Scheme 15).
A simple and efficient method for azidoiodination of alkenes has been reported by Sudalai and co-workers [20] using NaIO4/KI/NaN3 combination. Through an anti-Markovnikov fashion, the regiospecific 1,2-azidoiodination proceeds to give β-iodoazides in quantitative yields (Scheme 16). Scheme 16. Azidoiodination of alkenes mediated by NaIO4/KI/NaN3 system. NaIO4 oxidizes both KI and NaN3 to release I2 and an azide radical, a combination of which gives IN3. Homolysis of IN3 affords an azide radical, which reacts with alkenes to form alkyl radical species. The combination of an alkyl radical with either molecular iodine or iodine radical affords β-iodoazides (Scheme 17).

Scheme 17. Plausible reaction mechanism.
Hanessian and co-workers [21] developed a method for the total synthesis of Jerangolid A (shows antifungal activity) where I2 was used for iodination of lactone in the presence of pyridine in DMF underwent further steps. Kuhakarn and co-workers [22] have described the method for the direct synthesis of β-keto sulfones between the reaction of sodium arensulfinates with alkenes, including styrene derivatives, and aliphatic alkenes mediated by o-iodoxybenzoic acid/iodine (IBX/I2) (Scheme 18).
[Bis(trifluoroacetoxy)iodo]benzene (PIFA) was used as a mediator for ethoxyiodination of enamides with potassium iodide, providing the corresponding products in good to quantitative yields [28]. A convenient method for the synthesis of vicinal iodohydrins and iodoesters from olefins has been reported by Narender and co-workers [29] via NH4I and oxone system in MeCN/H2O and DMF/DMA, under catalyst-free at room temperature, providing the corresponding products in good to quantitative yields. This protocol is realizable to various olefins, such as a terminal, symmetrical, and 1,2-disubstituted unsymmetrical olefins. Additionally, 1,2-disubstituted olefins provided excellent diastereoselectivity (Scheme 21). Ma and co-workers [27] established stereoselective iodohydroxylation of 1,2-allenylic sulfoxides using iodine and benzyl thiol, providing 3-hydroxy-2-iodo-2(E)-alkenyl sulfides in the presence of MeCN/H 2 O as a solvent.
[Bis(trifluoroacetoxy)iodo]benzene (PIFA) was used as a mediator for ethoxyiodination of enamides with potassium iodide, providing the corresponding products in good to quantitative yields [28]. A convenient method for the synthesis of vicinal iodohydrins and iodoesters from olefins has been reported by Narender and co-workers [29] via NH 4 I and oxone system in MeCN/H 2 O and DMF/DMA, under catalyst-free at room temperature, providing the corresponding products in good to quantitative yields. This protocol is realizable to various olefins, such as a terminal, symmetrical, and 1,2-disubstituted unsymmetrical olefins. Additionally, 1,2-disubstituted olefins provided excellent diastereoselectivity (Scheme 21).
[Bis(trifluoroacetoxy)iodo]benzene (PIFA) was used as a mediator for ethoxyiodination of enamides with potassium iodide, providing the corresponding products in good to quantitative yields [28]. A convenient method for the synthesis of vicinal iodohydrins and iodoesters from olefins has been reported by Narender and co-workers [29] via NH4I and oxone system in MeCN/H2O and DMF/DMA, under catalyst-free at room temperature, providing the corresponding products in good to quantitative yields. This protocol is realizable to various olefins, such as a terminal, symmetrical, and 1,2-disubstituted unsymmetrical olefins. Additionally, 1,2-disubstituted olefins provided excellent diastereoselectivity (Scheme 21).  The protocol for the synthesis of iodovinylnaphthols using molecular iodine in the presence of MeCN as the solvent has been developed by Kumar and co-workers (Scheme 22) [30].
Since halohydrins are essential building blocks in organic synthesis and could be transformed to other organic intermediates such as amino-, azidoalcohols, and epoxides, Ning and co-workers [31] established an efficient protocol of iodohydroxylation of olefins with DMSO (dimethylsulfoxide) as an oxidant, an oxygen source, a solvent and HI generated in situ. It was reported that DMSO could oxidize haloanions to halocations under acidic conditions (Scheme 23). Since halohydrins are essential building blocks in organic synthesis and could be transformed to other organic intermediates such as amino-, azidoalcohols, and epoxides, Ning and co-workers [31] established an efficient protocol of iodohydroxylation of olefins with DMSO (dimethylsulfoxide) as an oxidant, an oxygen source, a solvent and HI generated in situ. It was reported that DMSO could oxidize haloanions to halocations under acidic conditions (Scheme 23).
Zhu and co-workers [32] developed a one-pot and non-metal strategy for the direct vicinal difunctionalization of alkenes using iodine and tert-butyl hydroperoxide (TBHP) to synthesize 1-(tert-butylperoxy)-2-iodoethanes in good to high yields (Scheme 24). The method is realizable in the fields of organic synthesis, pharmacology, and medicinal chemistry. Iodine monoacetate as an effective reagent was used for the regio-and diastereoselective iodoacetoxylation of alkenes and alkynes. An inexpensive, non-metal, and environmentally friendly protocol for synthesizing iodine monoacetate was presented using iodine and oxone in acetic anhydride and acetic acid combination. It was shown that the reactions with styrene derivatives were more successful than allylic and aliphatic olefins, Since halohydrins are essential building blocks in organic synthesis and could be transformed to other organic intermediates such as amino-, azidoalcohols, and epoxides, Ning and co-workers [31] established an efficient protocol of iodohydroxylation of olefins with DMSO (dimethylsulfoxide) as an oxidant, an oxygen source, a solvent and HI generated in situ. It was reported that DMSO could oxidize haloanions to halocations under acidic conditions (Scheme 23).
Zhu and co-workers [32] developed a one-pot and non-metal strategy for the direct vicinal difunctionalization of alkenes using iodine and tert-butyl hydroperoxide (TBHP) to synthesize 1-(tert-butylperoxy)-2-iodoethanes in good to high yields (Scheme 24). The method is realizable in the fields of organic synthesis, pharmacology, and medicinal chemistry. Iodine monoacetate as an effective reagent was used for the regio-and diastereoselective iodoacetoxylation of alkenes and alkynes. An inexpensive, non-metal, and environmentally friendly protocol for synthesizing iodine monoacetate was presented using iodine and oxone in acetic anhydride and acetic acid combination. It was shown that the reactions with styrene derivatives were more successful than allylic and aliphatic olefins, Scheme 23. Iodohydroxylation of olefins with NaI.
Zhu and co-workers [32] developed a one-pot and non-metal strategy for the direct vicinal difunctionalization of alkenes using iodine and tert-butyl hydroperoxide (TBHP) to synthesize 1-(tert-butylperoxy)-2-iodoethanes in good to high yields (Scheme 24). The method is realizable in the fields of organic synthesis, pharmacology, and medicinal chemistry. Since halohydrins are essential building blocks in organic synthesis and could be transformed to other organic intermediates such as amino-, azidoalcohols, and epoxides, Ning and co-workers [31] established an efficient protocol of iodohydroxylation of olefins with DMSO (dimethylsulfoxide) as an oxidant, an oxygen source, a solvent and HI generated in situ. It was reported that DMSO could oxidize haloanions to halocations under acidic conditions (Scheme 23).
Zhu and co-workers [32] developed a one-pot and non-metal strategy for the direct vicinal difunctionalization of alkenes using iodine and tert-butyl hydroperoxide (TBHP) to synthesize 1-(tert-butylperoxy)-2-iodoethanes in good to high yields (Scheme 24). The method is realizable in the fields of organic synthesis, pharmacology, and medicinal chemistry. Iodine monoacetate as an effective reagent was used for the regio-and diastereoselective iodoacetoxylation of alkenes and alkynes. An inexpensive, non-metal, and environmentally friendly protocol for synthesizing iodine monoacetate was presented using iodine and oxone in acetic anhydride and acetic acid combination. It was shown that the reactions with styrene derivatives were more successful than allylic and aliphatic olefins, Scheme 24. Synthesis of 1-(tert-butylperoxy)-2-iodoethanes with I 2 /TBHP. Iodine monoacetate as an effective reagent was used for the regio-and diastereoselective iodoacetoxylation of alkenes and alkynes. An inexpensive, non-metal, and environmentally friendly protocol for synthesizing iodine monoacetate was presented using iodine and oxone in acetic anhydride and acetic acid combination. It was shown that the reactions with styrene derivatives were more successful than allylic and aliphatic olefins, where regioisomeric mixtures in lower yields were observed (Scheme 25). Additionally, alkynes provided mono-and diiodinations in comparable yields [33].
Liu and co-workers [34] developed the environmentally friendly method for the iodofunctionalization of olefins using I2O5 as the inorganic oxidant and LiI as the iodine source, in H2O/acetone as the green solvent, providing the iodinated products in good to excellent yields (Scheme 26). The synthesis of different medicinal and agrochemical products could be realized through this method. It is assumed that I2O5 oxidizes LiI to form HOI, which acts as a reactive electrophilic intermediate to cause the electrophile-mediated cyclization. If olefin is tethered with a nucleophilic center, intramolecular cyclization will occur. In contrast, when a substrate without a nucleophilic site was used, iodohydrin adducts were provided via the intermolecular nucleophilic attack of water onto the iodonium ions.
Meng and co-workers [36] have discovered a convenient and efficient method for iodination of arylacetylenes using I2 and DMAP (4-dimethylaminopyridine) (Scheme 27) and the iodination of aryl acetylenic ketones by employing K2CO3 as a base providing the corresponding products in good to excellent yields (Scheme 28). Tsai and co-workers [37] have established a simple and environmentally friendly method for iodination of terminal alkynes catalyzed by CuI/TBAB (tetrabutylammonium bromide) under air in water providing the corresponding products in good to high yields (Scheme 29). Liu and co-workers [34] developed the environmentally friendly method for the iodofunctionalization of olefins using I 2 O 5 as the inorganic oxidant and LiI as the iodine source, in H 2 O/acetone as the green solvent, providing the iodinated products in good to excellent yields (Scheme 26). The synthesis of different medicinal and agrochemical products could be realized through this method.
Liu and co-workers [34] developed the environmentally friendly method for the iodofunctionalization of olefins using I2O5 as the inorganic oxidant and LiI as the iodine source, in H2O/acetone as the green solvent, providing the iodinated products in good to excellent yields (Scheme 26). The synthesis of different medicinal and agrochemical products could be realized through this method. It is assumed that I2O5 oxidizes LiI to form HOI, which acts as a reactive electrophilic intermediate to cause the electrophile-mediated cyclization. If olefin is tethered with a nucleophilic center, intramolecular cyclization will occur. In contrast, when a substrate without a nucleophilic site was used, iodohydrin adducts were provided via the intermolecular nucleophilic attack of water onto the iodonium ions.
Meng and co-workers [36] have discovered a convenient and efficient method for iodination of arylacetylenes using I2 and DMAP (4-dimethylaminopyridine) (Scheme 27) and the iodination of aryl acetylenic ketones by employing K2CO3 as a base providing the corresponding products in good to excellent yields (Scheme 28). Tsai and co-workers [37] have established a simple and environmentally friendly method for iodination of terminal alkynes catalyzed by CuI/TBAB (tetrabutylammonium bromide) under air in water providing the corresponding products in good to high yields (Scheme 29). It is assumed that I 2 O 5 oxidizes LiI to form HOI, which acts as a reactive electrophilic intermediate to cause the electrophile-mediated cyclization. If olefin is tethered with a nucleophilic center, intramolecular cyclization will occur. In contrast, when a substrate without a nucleophilic site was used, iodohydrin adducts were provided via the intermolecular nucleophilic attack of water onto the iodonium ions.
Meng and co-workers [36] have discovered a convenient and efficient method for iodination of arylacetylenes using I 2 and DMAP (4-dimethylaminopyridine) (Scheme 27) and the iodination of aryl acetylenic ketones by employing K 2 CO 3 as a base providing the corresponding products in good to excellent yields (Scheme 28).
Liu and co-workers [34] developed the environmentally friendly method for the iodofunctionalization of olefins using I2O5 as the inorganic oxidant and LiI as the iodine source, in H2O/acetone as the green solvent, providing the iodinated products in good to excellent yields (Scheme 26). The synthesis of different medicinal and agrochemical products could be realized through this method. It is assumed that I2O5 oxidizes LiI to form HOI, which acts as a reactive electrophilic intermediate to cause the electrophile-mediated cyclization. If olefin is tethered with a nucleophilic center, intramolecular cyclization will occur. In contrast, when a substrate without a nucleophilic site was used, iodohydrin adducts were provided via the intermolecular nucleophilic attack of water onto the iodonium ions.
Meng and co-workers [36] have discovered a convenient and efficient method for iodination of arylacetylenes using I2 and DMAP (4-dimethylaminopyridine) (Scheme 27) and the iodination of aryl acetylenic ketones by employing K2CO3 as a base providing the corresponding products in good to excellent yields (Scheme 28). Tsai and co-workers [37] have established a simple and environmentally friendly method for iodination of terminal alkynes catalyzed by CuI/TBAB (tetrabutylammonium bromide) under air in water providing the corresponding products in good to high yields (Scheme 29).  where regioisomeric mixtures in lower yields were observed (Scheme 25). Additionally, alkynes provided mono-and diiodinations in comparable yields [33].
Liu and co-workers [34] developed the environmentally friendly method for the iodofunctionalization of olefins using I2O5 as the inorganic oxidant and LiI as the iodine source, in H2O/acetone as the green solvent, providing the iodinated products in good to excellent yields (Scheme 26). The synthesis of different medicinal and agrochemical products could be realized through this method. It is assumed that I2O5 oxidizes LiI to form HOI, which acts as a reactive electrophilic intermediate to cause the electrophile-mediated cyclization. If olefin is tethered with a nucleophilic center, intramolecular cyclization will occur. In contrast, when a substrate without a nucleophilic site was used, iodohydrin adducts were provided via the intermolecular nucleophilic attack of water onto the iodonium ions.
Meng and co-workers [36] have discovered a convenient and efficient method for iodination of arylacetylenes using I2 and DMAP (4-dimethylaminopyridine) (Scheme 27) and the iodination of aryl acetylenic ketones by employing K2CO3 as a base providing the corresponding products in good to excellent yields (Scheme 28). Tsai and co-workers [37] have established a simple and environmentally friendly method for iodination of terminal alkynes catalyzed by CuI/TBAB (tetrabutylammonium bromide) under air in water providing the corresponding products in good to high yields (Scheme 29). Tsai and co-workers [37] have established a simple and environmentally friendly method for iodination of terminal alkynes catalyzed by CuI/TBAB (tetrabutylammonium bromide) under air in water providing the corresponding products in good to high yields (Scheme 29).
The efficient method for iodoarylation of arylalkynes with I 2 and PhI(OCOPh) 2 was developed [38], providing the corresponding products in moderate to good yields (Scheme 30). Reddy and co-workers [39] developed an efficient protocol for oxy-iodination of alkynes using potassium iodide (KI) and tert-butyl hydroperoxide (TBHP), in the presence of methanol as a solvent, at room temperature affording the corresponding products in moderate to quantitative yields (Scheme 31).
Selected products: Scheme 31. Synthesis of 1-iodoalkynes employing KI/TBHP. A novel and convenient protocol for the hydroiodination of alkynes has been established by Ogawa and Kawaguchi [40], employing I2/hydrophosphine binary system affording the corresponding Markovnikov-type adducts in good yield. It was reported that this method could be applied for iodinations of OH and COOH groups. Chobanyan and co-workers have reported the method for the synthesis of hydroalumantion-iodination of alkyne-1,4-diols [41].
Guo and co-workers [42] have reported a new approach for the synthesis of (E)-diiodoalkenes using alkyne as the starting material, ammonium persulfate as an oxidant, iodide as iodine source, and water as the green solvent, providing the corresponding products in good to quantitative yields (Scheme 32). Reddy and co-workers [39] developed an efficient protocol for oxy-iodination of alkynes using potassium iodide (KI) and tert-butyl hydroperoxide (TBHP), in the presence of methanol as a solvent, at room temperature affording the corresponding products in moderate to quantitative yields (Scheme 31).
Selected products: Scheme 31. Synthesis of 1-iodoalkynes employing KI/TBHP. A novel and convenient protocol for the hydroiodination of alkynes has been established by Ogawa and Kawaguchi [40], employing I2/hydrophosphine binary system affording the corresponding Markovnikov-type adducts in good yield. It was reported that this method could be applied for iodinations of OH and COOH groups. Chobanyan and co-workers have reported the method for the synthesis of hydroalumantion-iodination of alkyne-1,4-diols [41].
Guo and co-workers [42] have reported a new approach for the synthesis of (E)-diiodoalkenes using alkyne as the starting material, ammonium persulfate as an oxidant, iodide as iodine source, and water as the green solvent, providing the corresponding products in good to quantitative yields (Scheme 32). Reddy and co-workers [39] developed an efficient protocol for oxy-iodination of alkynes using potassium iodide (KI) and tert-butyl hydroperoxide (TBHP), in the presence of methanol as a solvent, at room temperature affording the corresponding products in moderate to quantitative yields (Scheme 31). Reddy and co-workers [39] developed an efficient protocol for oxy-iodination of alkynes using potassium iodide (KI) and tert-butyl hydroperoxide (TBHP), in the presence of methanol as a solvent, at room temperature affording the corresponding products in moderate to quantitative yields (Scheme 31).
Selected products: Scheme 31. Synthesis of 1-iodoalkynes employing KI/TBHP. A novel and convenient protocol for the hydroiodination of alkynes has been established by Ogawa and Kawaguchi [40], employing I2/hydrophosphine binary system affording the corresponding Markovnikov-type adducts in good yield. It was reported that this method could be applied for iodinations of OH and COOH groups. Chobanyan and co-workers have reported the method for the synthesis of hydroalumantion-iodination of alkyne-1,4-diols [41].
Guo and co-workers [42] have reported a new approach for the synthesis of (E)-diiodoalkenes using alkyne as the starting material, ammonium persulfate as an oxidant, iodide as iodine source, and water as the green solvent, providing the corresponding products in good to quantitative yields (Scheme 32). A novel and convenient protocol for the hydroiodination of alkynes has been established by Ogawa and Kawaguchi [40], employing I 2 /hydrophosphine binary system affording the corresponding Markovnikov-type adducts in good yield. It was reported that this method could be applied for iodinations of OH and COOH groups. Chobanyan and co-workers have reported the method for the synthesis of hydroalumantion-iodination of alkyne-1,4-diols [41].
Guo and co-workers [42] have reported a new approach for the synthesis of (E)diiodoalkenes using alkyne as the starting material, ammonium persulfate as an oxidant, iodide as iodine source, and water as the green solvent, providing the corresponding products in good to quantitative yields (Scheme 32). Reddy and co-workers [39] developed an efficient protocol for oxy-iodination of alkynes using potassium iodide (KI) and tert-butyl hydroperoxide (TBHP), in the presence of methanol as a solvent, at room temperature affording the corresponding products in moderate to quantitative yields (Scheme 31).
Selected products: Scheme 31. Synthesis of 1-iodoalkynes employing KI/TBHP. A novel and convenient protocol for the hydroiodination of alkynes has been established by Ogawa and Kawaguchi [40], employing I2/hydrophosphine binary system affording the corresponding Markovnikov-type adducts in good yield. It was reported that this method could be applied for iodinations of OH and COOH groups. Chobanyan and co-workers have reported the method for the synthesis of hydroalumantion-iodination of alkyne-1,4-diols [41].
Guo and co-workers [42] have reported a new approach for the synthesis of (E)-diiodoalkenes using alkyne as the starting material, ammonium persulfate as an oxidant, iodide as iodine source, and water as the green solvent, providing the corresponding products in good to quantitative yields (Scheme 32). It is assumed that oxidation of the iodide ion by the persulfate ion generates I 2 , which further undergoes electrophilic anti-addition into the alkyne to afford the corresponding (E)-1,2-diiodoalkene (Scheme 33).
It is assumed that oxidation of the iodide ion by the persulfate ion generates I2, which further undergoes electrophilic anti-addition into the alkyne to afford the corresponding (E)-1,2-diiodoalkene (Scheme 33).

Scheme 35.
Oxidative (E)-diiodination of alkynes using NH4I/oxone system. It is reported that oxone oxidizes the I − (NH4I) to form I + (HOI). This reactive species may react with alkyne to give a transient cyclic iodonium species, which further undergoes nucleophilic attack by I − in situ from the opposite side of the cyclic iodonium ion to provide trans-diiodo alkene.
Ferris and co-workers have reported an efficient method for the iodination of terminal alkynes [46], employing a stoichiometric amount of KI and CuSO4 in a mix of MeCN and sodium acetate buffer solution (pH 5).
Bathophenanthrolinedisulfonic acid (BPDS) was used to solubilize copper species in the solution (Scheme 36).
Compounds 2021, 1, FOR PEER REVIEW 11 It is assumed that oxidation of the iodide ion by the persulfate ion generates I2, which further undergoes electrophilic anti-addition into the alkyne to afford the corresponding (E)-1,2-diiodoalkene (Scheme 33).
Selected products: Inexpensive and non-toxic reagents NH4I (iodide source) and oxone (oxidant) were used for stereospecific oxidative (E)-diiodination of various alkynes such as aliphatic, aromatic, and heteroaromatic alkynes at room temperature in the presence of water as a green solvent [45] (Scheme 35).

Scheme 35.
Oxidative (E)-diiodination of alkynes using NH4I/oxone system. It is reported that oxone oxidizes the I − (NH4I) to form I + (HOI). This reactive species may react with alkyne to give a transient cyclic iodonium species, which further undergoes nucleophilic attack by I − in situ from the opposite side of the cyclic iodonium ion to provide trans-diiodo alkene.
Ferris and co-workers have reported an efficient method for the iodination of terminal alkynes [46], employing a stoichiometric amount of KI and CuSO4 in a mix of MeCN and sodium acetate buffer solution (pH 5).
Bathophenanthrolinedisulfonic acid (BPDS) was used to solubilize copper species in the solution (Scheme 36). Inexpensive and non-toxic reagents NH 4 I (iodide source) and oxone (oxidant) were used for stereospecific oxidative (E)-diiodination of various alkynes such as aliphatic, aromatic, and heteroaromatic alkynes at room temperature in the presence of water as a green solvent [45] (Scheme 35).
Compounds 2021, 1, FOR PEER REVIEW 11 It is assumed that oxidation of the iodide ion by the persulfate ion generates I2, which further undergoes electrophilic anti-addition into the alkyne to afford the corresponding (E)-1,2-diiodoalkene (Scheme 33).

Scheme 35.
Oxidative (E)-diiodination of alkynes using NH4I/oxone system. It is reported that oxone oxidizes the I − (NH4I) to form I + (HOI). This reactive species may react with alkyne to give a transient cyclic iodonium species, which further undergoes nucleophilic attack by I − in situ from the opposite side of the cyclic iodonium ion to provide trans-diiodo alkene.
Ferris and co-workers have reported an efficient method for the iodination of terminal alkynes [46], employing a stoichiometric amount of KI and CuSO4 in a mix of MeCN and sodium acetate buffer solution (pH 5).
Bathophenanthrolinedisulfonic acid (BPDS) was used to solubilize copper species in the solution (Scheme 36). It is reported that oxone oxidizes the I − (NH 4 I) to form I + (HOI). This reactive species may react with alkyne to give a transient cyclic iodonium species, which further undergoes nucleophilic attack by I − in situ from the opposite side of the cyclic iodonium ion to provide trans-diiodo alkene.
Ferris and co-workers have reported an efficient method for the iodination of terminal alkynes [46], employing a stoichiometric amount of KI and CuSO 4 in a mix of MeCN and sodium acetate buffer solution (pH 5).
Bathophenanthrolinedisulfonic acid (BPDS) was used to solubilize copper species in the solution (Scheme 36). Han and Xiao [47] have developed an efficient and simple procedure for doubleiodination of terminal alkynes using I2 in the presence of water as the green solvent at room temperature. Moreover, by employing I2/H3PO3 system, the selective hydroiodination of different alkenes and alkynes were obtained in good yields (Scheme 37).

Selected products:
Scheme 37. Hydriodination and double-iodination of alkenes and alkynes using I2. Han and Xiao [47] have developed an efficient and simple procedure for doubleiodination of terminal alkynes using I 2 in the presence of water as the green solvent at room temperature. Moreover, by employing I 2 /H 3 PO 3 system, the selective hydroiodination of different alkenes and alkynes were obtained in good yields (Scheme 37). Han and Xiao [47] have developed an efficient and simple procedure for double-iodination of terminal alkynes using I2 in the presence of water as the green solvent at room temperature. Moreover, by employing I2/H3PO3 system, the selective hydroiodination of different alkenes and alkynes were obtained in good yields (Scheme 37).

Selected products:
Scheme 37. Hydriodination and double-iodination of alkenes and alkynes using I2. Scheme 37. Hydriodination and double-iodination of alkenes and alkynes using I 2 .
Regarding the mechanism, it was reported that H 3 PO 3 could react with molecular iodine to give hydrogen iodide HI, and then following the Markovnikov rule, provides the corresponding hydroiodination. For the double-iodination, I 2 undergoes electronic anti-addition to alkynes via a cyclic iodonium to provide the corresponding diiodoalkene (Scheme 38).
Compounds 2021, 1, FOR PEER REVIEW 13 Regarding the mechanism, it was reported that H3PO3 could react with molecular iodine to give hydrogen iodide HI, and then following the Markovnikov rule, provides the corresponding hydroiodination. For the double-iodination, I2 undergoes electronic anti-addition to alkynes via a cyclic iodonium to provide the corresponding diiodoalkene (Scheme 38).
In the same year, Lingling and co-workers [49] have published a convenient protocol for diiodination of alkynes employing sodium iodide (as iodine source) and air (as an oxidant) under the visible light, providing the corresponding products in moderate to high yields (Scheme 40). Recently, an environmentally benign method for the aerobic oxidative iodination of terminal alkynes mediated by sodium sulfinate /KI was presented by Zhuo and co-workers [50] using ethanol as the green solvent at room temperature. Moreover, the synthesis Scheme 38. Possible reaction pathway.
Compounds 2021, 1, FOR PEER REVIEW 13 Regarding the mechanism, it was reported that H3PO3 could react with molecular iodine to give hydrogen iodide HI, and then following the Markovnikov rule, provides the corresponding hydroiodination. For the double-iodination, I2 undergoes electronic anti-addition to alkynes via a cyclic iodonium to provide the corresponding diiodoalkene (Scheme 38).
In the same year, Lingling and co-workers [49] have published a convenient protocol for diiodination of alkynes employing sodium iodide (as iodine source) and air (as an oxidant) under the visible light, providing the corresponding products in moderate to high yields (Scheme 40). Recently, an environmentally benign method for the aerobic oxidative iodination of terminal alkynes mediated by sodium sulfinate /KI was presented by Zhuo and co-workers [50] using ethanol as the green solvent at room temperature. Moreover, the synthesis Scheme 39. Synthesis of 1,1,2-triiodostyrenes mediated by I 2 /NaOAc.
In the same year, Lingling and co-workers [49] have published a convenient protocol for diiodination of alkynes employing sodium iodide (as iodine source) and air (as an oxidant) under the visible light, providing the corresponding products in moderate to high yields (Scheme 40).
Compounds 2021, 1, FOR PEER REVIEW 13 Regarding the mechanism, it was reported that H3PO3 could react with molecular iodine to give hydrogen iodide HI, and then following the Markovnikov rule, provides the corresponding hydroiodination. For the double-iodination, I2 undergoes electronic anti-addition to alkynes via a cyclic iodonium to provide the corresponding diiodoalkene (Scheme 38).
In the same year, Lingling and co-workers [49] have published a convenient protocol for diiodination of alkynes employing sodium iodide (as iodine source) and air (as an oxidant) under the visible light, providing the corresponding products in moderate to high yields (Scheme 40). Recently, an environmentally benign method for the aerobic oxidative iodination of terminal alkynes mediated by sodium sulfinate /KI was presented by Zhuo and co-workers [50] using ethanol as the green solvent at room temperature. Moreover, the synthesis Recently, an environmentally benign method for the aerobic oxidative iodination of terminal alkynes mediated by sodium sulfinate/KI was presented by Zhuo and coworkers [50] using ethanol as the green solvent at room temperature. Moreover, the synthesis of symmetrical 1,3-diynes was presented via the iodination/homocoupling of terminal alkynes (Scheme 41).

Iodination of Alkyl Carbonyls Compounds to α-Iodo Alkyl Carbonyl Derivatives
In 2008, Stavber and co-workers [11] had established an environmentally friendly methodology for aerobic oxidative α-iodination of carbonyl compounds using potassium iodide as iodine source catalyzed by sodium nitrite in acidic media providing the corresponding products in good to quantitative yields. In the case of aryl methyl ketones using MeCN as the solvent, iodination on the aromatic ring was occurred, while in the presence of aqueous EtOH as the solvent, the methyl group was iodinated (Scheme 42). Scheme 42. Iodination of aryl alkyl ketones mediated by KI/NaNO2/H2SO4 in aqueous EtOH.
Pavlinac and co-workers [51] have described an efficient methodology for the iodination of dimethoxy-and trimethoxy benzenes, aryl alkyl ketones and cyclic ketones by employing I2/UHP (urea-H2O2) or I2/30% aq. H2O2 in the water miscible ionic liquid (IL) 1butyl-3-methyl imidazolium tetrafluoroborate (bmimBF4) or in water immiscible IL, 1-butyl-3-methyl imidazolium hexafluorophosphate(bmimPF6), providing the corresponding products in excellent yields. In terms of efficiency, 30% aq. H2O2 was superior to UHP as the mediator of iodination in both ILs for iodine introduction at methoxy substituted benzenes and alkyl site next to a carbonyl group (Scheme 43). The same group of authors have developed [52] the green methodology for iodination of aryl methoxy substituted 1-indanone, 1-tetralone, and acetophenone using I2/30% aq. H2O2 as oxidant under solvent-and catalyst-free reaction conditions (SFRC). In the case of dimethoxy-and trimethoxy benzenes, iodination on the aromatic ring has Scheme 41. Synthesis of 1-iodoalkynes mediated by TolSO 2 Na/KI.

Iodination of Alkyl Carbonyls Compounds to α-Iodo Alkyl Carbonyl Derivatives
In 2008, Stavber and co-workers [11] had established an environmentally friendly methodology for aerobic oxidative α-iodination of carbonyl compounds using potassium iodide as iodine source catalyzed by sodium nitrite in acidic media providing the corresponding products in good to quantitative yields. In the case of aryl methyl ketones using MeCN as the solvent, iodination on the aromatic ring was occurred, while in the presence of aqueous EtOH as the solvent, the methyl group was iodinated (Scheme 42).

Iodination of Alkyl Carbonyls Compounds to α-Iodo Alkyl Carbonyl Derivatives
In 2008, Stavber and co-workers [11] had established an environmentally friendly methodology for aerobic oxidative α-iodination of carbonyl compounds using potassium iodide as iodine source catalyzed by sodium nitrite in acidic media providing the corresponding products in good to quantitative yields. In the case of aryl methyl ketones using MeCN as the solvent, iodination on the aromatic ring was occurred, while in the presence of aqueous EtOH as the solvent, the methyl group was iodinated (Scheme 42). Scheme 42. Iodination of aryl alkyl ketones mediated by KI/NaNO2/H2SO4 in aqueous EtOH.
Pavlinac and co-workers [51] have described an efficient methodology for the iodination of dimethoxy-and trimethoxy benzenes, aryl alkyl ketones and cyclic ketones by employing I2/UHP (urea-H2O2) or I2/30% aq. H2O2 in the water miscible ionic liquid (IL) 1butyl-3-methyl imidazolium tetrafluoroborate (bmimBF4) or in water immiscible IL, 1-butyl-3-methyl imidazolium hexafluorophosphate(bmimPF6), providing the corresponding products in excellent yields. In terms of efficiency, 30% aq. H2O2 was superior to UHP as the mediator of iodination in both ILs for iodine introduction at methoxy substituted benzenes and alkyl site next to a carbonyl group (Scheme 43). The same group of authors have developed [52] the green methodology for iodination of aryl methoxy substituted 1-indanone, 1-tetralone, and acetophenone using I2/30% aq. H2O2 as oxidant under solvent-and catalyst-free reaction conditions (SFRC). In the case of dimethoxy-and trimethoxy benzenes, iodination on the aromatic ring has Scheme 42. Iodination of aryl alkyl ketones mediated by KI/NaNO 2 /H 2 SO 4 in aqueous EtOH.
Pavlinac and co-workers [51] have described an efficient methodology for the iodination of dimethoxy-and trimethoxy benzenes, aryl alkyl ketones and cyclic ketones by employing I 2 /UHP (urea-H 2 O 2 ) or I 2 /30% aq. H 2 O 2 in the water miscible ionic liquid (IL) 1-butyl-3-methyl imidazolium tetrafluoroborate (bmimBF 4 ) or in water immiscible IL, 1-butyl-3-methyl imidazolium hexafluorophosphate(bmimPF 6 ), providing the corresponding products in excellent yields. In terms of efficiency, 30% aq. H 2 O 2 was superior to UHP as the mediator of iodination in both ILs for iodine introduction at methoxy substituted benzenes and alkyl site next to a carbonyl group (Scheme 43).

Iodination of Alkyl Carbonyls Compounds to α-Iodo Alkyl Carbonyl Derivatives
In 2008, Stavber and co-workers [11] had established an environmentally friendly methodology for aerobic oxidative α-iodination of carbonyl compounds using potassium iodide as iodine source catalyzed by sodium nitrite in acidic media providing the corresponding products in good to quantitative yields. In the case of aryl methyl ketones using MeCN as the solvent, iodination on the aromatic ring was occurred, while in the presence of aqueous EtOH as the solvent, the methyl group was iodinated (Scheme 42). Scheme 42. Iodination of aryl alkyl ketones mediated by KI/NaNO2/H2SO4 in aqueous EtOH.
Pavlinac and co-workers [51] have described an efficient methodology for the iodination of dimethoxy-and trimethoxy benzenes, aryl alkyl ketones and cyclic ketones by employing I2/UHP (urea-H2O2) or I2/30% aq. H2O2 in the water miscible ionic liquid (IL) 1butyl-3-methyl imidazolium tetrafluoroborate (bmimBF4) or in water immiscible IL, 1-butyl-3-methyl imidazolium hexafluorophosphate(bmimPF6), providing the corresponding products in excellent yields. In terms of efficiency, 30% aq. H2O2 was superior to UHP as the mediator of iodination in both ILs for iodine introduction at methoxy substituted benzenes and alkyl site next to a carbonyl group (Scheme 43). The same group of authors have developed [52] the green methodology for iodination of aryl methoxy substituted 1-indanone, 1-tetralone, and acetophenone using I2/30% aq. H2O2 as oxidant under solvent-and catalyst-free reaction conditions (SFRC). In the case of dimethoxy-and trimethoxy benzenes, iodination on the aromatic ring has The same group of authors have developed [52] the green methodology for iodination of aryl methoxy substituted 1-indanone, 1-tetralone, and acetophenone using I 2 /30% aq. H 2 O 2 as oxidant under solvent-and catalyst-free reaction conditions (SFRC). In the case of dimethoxy-and trimethoxy benzenes, iodination on the aromatic ring has occurred, while in the case of aryl alkyl ketones, iodination took place at the alkyl position next to a carbonyl group (Scheme 44). Furthermore, Iskra and co-workers [53] have reported an efficient, selective, and metal-free protocol for the iodination of aldehydes, alkyl ketones, and aromatics using I2/NaNO2/air/silica-supported H2SO4 in MeCN at room temperature. Air was used as the oxidant for the regeneration of I2 from eluted HI with 100% iodine atom economy (Scheme 45). Scheme 45. Aerobic iodination of alkyl carbonyls using air/I2/NaNO2/acid system. Yadav and co-workers [54] have reported a new and efficient method for the synthesis of α-iodo ketones and α-iodo dimethyl ketals in good to high yields, starting from acetophenones in the presence of I2 and TMOF (trimethylorthoformate), (Scheme 46). Furthermore, Iskra and co-workers [53] have reported an efficient, selective, and metal-free protocol for the iodination of aldehydes, alkyl ketones, and aromatics using I 2 /NaNO 2 /air/silica-supported H 2 SO 4 in MeCN at room temperature. Air was used as the oxidant for the regeneration of I 2 from eluted HI with 100% iodine atom economy (Scheme 45). Furthermore, Iskra and co-workers [53] have reported an efficient, selective, and metal-free protocol for the iodination of aldehydes, alkyl ketones, and aromatics using I2/NaNO2/air/silica-supported H2SO4 in MeCN at room temperature. Air was used as the oxidant for the regeneration of I2 from eluted HI with 100% iodine atom economy (Scheme 45). Scheme 45. Aerobic iodination of alkyl carbonyls using air/I2/NaNO2/acid system. Yadav and co-workers [54] have reported a new and efficient method for the synthesis of α-iodo ketones and α-iodo dimethyl ketals in good to high yields, starting from acetophenones in the presence of I2 and TMOF (trimethylorthoformate), (Scheme 46). Scheme 45. Aerobic iodination of alkyl carbonyls using air/I 2 /NaNO 2 /acid system.
Yadav and co-workers [54] have reported a new and efficient method for the synthesis of α-iodo ketones and α-iodo dimethyl ketals in good to high yields, starting from acetophenones in the presence of I 2 and TMOF (trimethylorthoformate), (Scheme 46). A convenient method for iodination of α,β-unsaturated ketones using copper (II) oxide/iodine in the presence of i-PrOH as the solvent has been reported by Wang and coworkers [55], providing the corresponding products in good to high yields (Scheme 47). Scheme 47. Iodination of α,β-unsaturated ketones using CuO/I2. Terent'ev and co-workers [56] have reported the convenient method for synthesizing 2-iodo-1-methoxy hydroperoxides and their deperoxidation and demethoxylation to 2iodo ketones. The reactions have occurred between enol ethers and the I2-H2O2 system, providing the corresponding products in moderate to quantitative yields.
Stavber and co-workers [3] have established a novel and green methodology for iodination of ketones in an aqueous micellar system, in the presence of I2, as the iodine source, air (terminal oxidant), NaNO2 (catalyst), and H2SO4 (activator). The use of the aqueous solution of anionic amphiphile SDS (sodium dodecyl sulfate) was observed to be an excellent promoter than the use of water alone, improving the efficiency of the reactions (Scheme 48).
Lee and co-workers have developed an efficient method for iodination of aryl alkyl ketones using I2/HTIB [hydroxyl(tosyloxy)iodo]benzene or MeI/HTIB in [bmim]BF4 ionic liquid, providing the corresponding products in good to excellent yields [57].
An efficient protocol for the synthesis of α-iodo ketones by oxidative iodination of ketones in the presence of iodine and m-iodosylbenzoic acid as a recyclable oxidant has been presented. The corresponding iodinated products are separated from side products Scheme 46. α-iodination of ketones and dimethyl ketals with I 2 /TMOF. A convenient method for iodination of α,β-unsaturated ketones using copper (II) oxide/iodine in the presence of i-PrOH as the solvent has been reported by Wang and co-workers [55], providing the corresponding products in good to high yields (Scheme 47). A convenient method for iodination of α,β-unsaturated ketones using copper (II) oxide/iodine in the presence of i-PrOH as the solvent has been reported by Wang and coworkers [55], providing the corresponding products in good to high yields (Scheme 47). Scheme 47. Iodination of α,β-unsaturated ketones using CuO/I2. Terent'ev and co-workers [56] have reported the convenient method for synthesizing 2-iodo-1-methoxy hydroperoxides and their deperoxidation and demethoxylation to 2iodo ketones. The reactions have occurred between enol ethers and the I2-H2O2 system, providing the corresponding products in moderate to quantitative yields.
Stavber and co-workers [3] have established a novel and green methodology for iodination of ketones in an aqueous micellar system, in the presence of I2, as the iodine source, air (terminal oxidant), NaNO2 (catalyst), and H2SO4 (activator). The use of the aqueous solution of anionic amphiphile SDS (sodium dodecyl sulfate) was observed to be an excellent promoter than the use of water alone, improving the efficiency of the reactions (Scheme 48).
Lee and co-workers have developed an efficient method for iodination of aryl alkyl ketones using I2/HTIB [hydroxyl(tosyloxy)iodo]benzene or MeI/HTIB in [bmim]BF4 ionic liquid, providing the corresponding products in good to excellent yields [57].
An efficient protocol for the synthesis of α-iodo ketones by oxidative iodination of ketones in the presence of iodine and m-iodosylbenzoic acid as a recyclable oxidant has been presented. The corresponding iodinated products are separated from side products Scheme 47. Iodination of α,β-unsaturated ketones using CuO/I 2 .
Terent'ev and co-workers [56] have reported the convenient method for synthesizing 2-iodo-1-methoxy hydroperoxides and their deperoxidation and demethoxylation to 2iodo ketones. The reactions have occurred between enol ethers and the I 2 -H 2 O 2 system, providing the corresponding products in moderate to quantitative yields.
Stavber and co-workers [3] have established a novel and green methodology for iodination of ketones in an aqueous micellar system, in the presence of I 2 , as the iodine source, air (terminal oxidant), NaNO 2 (catalyst), and H 2 SO 4 (activator). The use of the aqueous solution of anionic amphiphile SDS (sodium dodecyl sulfate) was observed to be an excellent promoter than the use of water alone, improving the efficiency of the reactions (Scheme 48). A convenient method for iodination of α,β-unsaturated ketones using copper (II) oxide/iodine in the presence of i-PrOH as the solvent has been reported by Wang and coworkers [55], providing the corresponding products in good to high yields (Scheme 47). Scheme 47. Iodination of α,β-unsaturated ketones using CuO/I2. Terent'ev and co-workers [56] have reported the convenient method for synthesizing 2-iodo-1-methoxy hydroperoxides and their deperoxidation and demethoxylation to 2iodo ketones. The reactions have occurred between enol ethers and the I2-H2O2 system, providing the corresponding products in moderate to quantitative yields.
Stavber and co-workers [3] have established a novel and green methodology for iodination of ketones in an aqueous micellar system, in the presence of I2, as the iodine source, air (terminal oxidant), NaNO2 (catalyst), and H2SO4 (activator). The use of the aqueous solution of anionic amphiphile SDS (sodium dodecyl sulfate) was observed to be an excellent promoter than the use of water alone, improving the efficiency of the reactions (Scheme 48).
Lee and co-workers have developed an efficient method for iodination of aryl alkyl ketones using I2/HTIB [hydroxyl(tosyloxy)iodo]benzene or MeI/HTIB in [bmim]BF4 ionic liquid, providing the corresponding products in good to excellent yields [57].
An efficient protocol for the synthesis of α-iodo ketones by oxidative iodination of ketones in the presence of iodine and m-iodosylbenzoic acid as a recyclable oxidant has been presented. The corresponding iodinated products are separated from side products Lee and co-workers have developed an efficient method for iodination of aryl alkyl ketones using I 2 /HTIB [hydroxyl(tosyloxy)iodo]benzene or MeI/HTIB in [bmim]BF 4 ionic liquid, providing the corresponding products in good to excellent yields [57].
An efficient protocol for the synthesis of α-iodo ketones by oxidative iodination of ketones in the presence of iodine and m-iodosylbenzoic acid as a recyclable oxidant has been presented. The corresponding iodinated products are separated from side products by treatment with anionic exchange resin Amberlite IRA 900 HCO − 3 , m-iodosylbenzoic acid can be recovered from Amberlite resin by treatment with HCl [58].
A convenient and selective synthetic protocol for iodination of 1,3-dicarbonyl derivative substrates has been reported by Khan and Ali [59] using vanadyl acetylacetonate, hydrogen peroxide, and sodium iodide at ice-bath temperature, providing the iodinated products in good yields (Scheme 49).
A convenient and selective synthetic protocol for iodination of 1,3-dicarbonyl derivative substrates has been reported by Khan and Ali [59] using vanadyl acetylacetonate, hydrogen peroxide, and sodium iodide at ice-bath temperature, providing the iodinated products in good yields (Scheme 49).
Selected products: Moriya and co-workers [60] have reported a convenient method for reductive iodination of carboxylic acids to alkyl iodides using 1,1,3,3-tetramethyldisiloxane (TMDS) and I2 catalyzed by InBr3 in the presence of CHCl3 as the solvent.
Prebil and co-workers [61] have developed air/NH4NO3(cat.)/I2/H2SO4(cat.) reaction system in the presence of MeCN as the solvent, for the α-iodination of aryl, heteroaryl, alkyl, and cycloalkyl methyl ketones. In the case of strongly activated aryl methyl ketones iodination took place regioselectively on the aromatic ring, (Scheme 50).
Regarding the mechanism, in cycle I, iodination enol form of the ketone at α-position using I2 has occurred, and I2 has been reduced to HI. The re-oxidation of iodide to I2 by NO2 has been presented as cycle II. NO2 has been reduced to NO when it completes the oxidation of iodide, while the oxidation of NO to NO2 is accomplished with aerial oxygen. Acidic conditions have two leading roles: the first is to transform NH4NO3 to HNO3, which is thermally supported decomposing equilibrium with NO2, and the second is in tuning the reactivity by increasing enolization of the ketone (Scheme 51). Moriya and co-workers [60] have reported a convenient method for reductive iodination of carboxylic acids to alkyl iodides using 1,1,3,3-tetramethyldisiloxane (TMDS) and I 2 catalyzed by InBr 3 in the presence of CHCl 3 as the solvent.
Prebil and co-workers [61] have developed air/NH 4 NO 3(cat.) /I 2 /H 2 SO 4(cat.) reaction system in the presence of MeCN as the solvent, for the α-iodination of aryl, heteroaryl, alkyl, and cycloalkyl methyl ketones. In the case of strongly activated aryl methyl ketones iodination took place regioselectively on the aromatic ring, (Scheme 50).
A convenient and selective synthetic protocol for iodination of 1,3-dicarbonyl derivative substrates has been reported by Khan and Ali [59] using vanadyl acetylacetonate, hydrogen peroxide, and sodium iodide at ice-bath temperature, providing the iodinated products in good yields (Scheme 49).
Moriya and co-workers [60] have reported a convenient method for reductive iodination of carboxylic acids to alkyl iodides using 1,1,3,3-tetramethyldisiloxane (TMDS) and I2 catalyzed by InBr3 in the presence of CHCl3 as the solvent.
Prebil and co-workers [61] have developed air/NH4NO3(cat.)/I2/H2SO4(cat.) reaction system in the presence of MeCN as the solvent, for the α-iodination of aryl, heteroaryl, alkyl, and cycloalkyl methyl ketones. In the case of strongly activated aryl methyl ketones iodination took place regioselectively on the aromatic ring, (Scheme 50).
Regarding the mechanism, in cycle I, iodination enol form of the ketone at α-position using I2 has occurred, and I2 has been reduced to HI. The re-oxidation of iodide to I2 by NO2 has been presented as cycle II. NO2 has been reduced to NO when it completes the oxidation of iodide, while the oxidation of NO to NO2 is accomplished with aerial oxygen. Acidic conditions have two leading roles: the first is to transform NH4NO3 to HNO3, which is thermally supported decomposing equilibrium with NO2, and the second is in tuning the reactivity by increasing enolization of the ketone (Scheme 51). Scheme 50. Aerobic oxidative α-iodination of alkyl methyl ketones using air/ NH 4 NO 3(cat.) /I 2 / H 2 SO 4(cat.) reaction system.
Regarding the mechanism, in cycle I, iodination enol form of the ketone at α-position using I 2 has occurred, and I 2 has been reduced to HI. The re-oxidation of iodide to I 2 by NO 2 has been presented as cycle II. NO 2 has been reduced to NO when it completes the oxidation of iodide, while the oxidation of NO to NO 2 is accomplished with aerial oxygen. Acidic conditions have two leading roles: the first is to transform NH 4 NO 3 to HNO 3 , which is thermally supported decomposing equilibrium with NO 2 , and the second is in tuning the reactivity by increasing enolization of the ketone (Scheme 51).
In 2014, Terent'ev and co-workers [62] reported mono-and bicyclic enol ethers reactions with I 2 /H 2 O 2 , I 2 -Bu t OOH, and I 2 -tetrahydropyranyl hydroperoxide combinations. The authors have presented that the reaction pathway depends on the nature of peroxide and the ring size. The reaction between 2,3-dihydrofuran and 3,4-dihydro-2H-pyran with the I 2 -hydroperoxide system provides iodoperoxides, α-iodolactones, and α-iodohemiacetals. Bicyclic enol ethers were converted into vicinal iodoperoxides only in the reaction with the I 2 -H 2 O 2 system (Scheme 52), while I 2 -Bu t OOH provides the hydroperoxidation product.
In 2015, Reddy and co-workers [64] had established a convenient and environmentally friendly protocol for the synthesis of α-iodo alkyl ketones starting from secondary alcohols, including benzylic and aliphatic alcohols (cyclic and acyclic) using ammonium iodide and oxone in aqueous media (Scheme 55).
Zhu and co-workers have reported the convenient method for the β-C (sp 3 )-H iodination of ketones in the presence of palladium (II) as the catalyst employing aminooxyacetic acid auxiliary [65]. Sanz-Marco and co-workers [66] have developed an efficient and one-pot methodology for the synthesis of α-iodo alkyl ketones (as single constitutional isomers) starting from allylic alcohols and elemental iodine in combination with NaNO 2 as an oxidation catalyst and oxygen as the terminal oxidant. The protocol combines a 1,3-hydrogen shift mediated by Ir(III) complex (Scheme 56).
Zhu and co-workers have reported the convenient method for the β-C (sp 3 )-H iodination of ketones in the presence of palladium (II) as the catalyst employing aminooxyacetic acid auxiliary [65]. Sanz-Marco and co-workers [66] have developed an efficient and one-pot methodology for the synthesis of α-iodo alkyl ketones (as single constitutional isomers) starting from allylic alcohols and elemental iodine in combination with NaNO2 as an oxidation catalyst and oxygen as the terminal oxidant. The protocol combines a 1,3hydrogen shift mediated by Ir(III) complex (Scheme 56).

Conclusions
In summary, this review presents the progress of various methods for the iodination of organic compounds, including alkanes, alkenes, alkynes and alkyl carbonyls using elemental iodine or iodides. Aerobic oxidative and non-metal iodination strategies are also established. It should be emphasized that convenient methods have been developed in this field. Still, investigating and developing environmentally friendlier protocols in aqueous reaction media or under solvent-free can be considered an exciting research subject. Scheme 55. Synthesis of α-iodo alkyl ketones using NH 4 I/oxone ® system.

Selected products:
Scheme 55. Synthesis of α-iodo alkyl ketones using NH4I/oxone ® system. Zhu and co-workers have reported the convenient method for the β-C (sp 3 )-H iodination of ketones in the presence of palladium (II) as the catalyst employing aminooxyacetic acid auxiliary [65]. Sanz-Marco and co-workers [66] have developed an efficient and one-pot methodology for the synthesis of α-iodo alkyl ketones (as single constitutional isomers) starting from allylic alcohols and elemental iodine in combination with NaNO2 as an oxidation catalyst and oxygen as the terminal oxidant. The protocol combines a 1,3hydrogen shift mediated by Ir(III) complex (Scheme 56).

Conclusions
In summary, this review presents the progress of various methods for the iodination of organic compounds, including alkanes, alkenes, alkynes and alkyl carbonyls using elemental iodine or iodides. Aerobic oxidative and non-metal iodination strategies are also established. It should be emphasized that convenient methods have been developed in this field. Still, investigating and developing environmentally friendlier protocols in aqueous reaction media or under solvent-free can be considered an exciting research subject. Scheme 56. Synthesis of α-iodoketones through aerobic oxidative iodination.

Conclusions
In summary, this review presents the progress of various methods for the iodination of organic compounds, including alkanes, alkenes, alkynes and alkyl carbonyls using elemental iodine or iodides. Aerobic oxidative and non-metal iodination strategies are also established. It should be emphasized that convenient methods have been developed in this field. Still, investigating and developing environmentally friendlier protocols in aqueous reaction media or under solvent-free can be considered an exciting research subject.  Data Availability Statement: Not applicable.

Conflicts of Interest:
The authors declare no conflict of interest.