Synthesis and Biological Activities of Some Metal Complexes of Peptides: A Review

Peptides, both natural and synthetic, are well suited for a wide range of purposes and offer versatile applications in different fields such as biocatalysts, injectable hydrogels, tumor treatment, and drug delivery. The research of the better part of the cited papers was conducted using various database platforms such as MetalPDB. The rising prominence of therapeutic peptides encompasses anticancer, antiviral, antimicrobial, and anti-neurodegenerative properties. The metals Na, K, Mg, Ca, Fe, Mn, Co, Cu, Zn, and Mo are ten of the twenty elements that are considered essential for life. Crucial for understanding the biological role of metals is the exploration of metal-bound proteins and peptides. Aside from essential metals, there are other non-essential metals that also interact biologically, exhibiting either therapeutic or toxic effects. Irregularities in metal binding contribute to diseases like Alzheimer’s, neurodegenerative disorders, Wilson’s, and Menkes disease. Certain metal complexes have potential applications as radiopharmaceuticals. The examination of these complexes was achieved by preforming UV–Vis, IR, EPR, NMR spectroscopy, and X-ray analysis. This summary, although unable to cover all of the studies in the field, offers a review of the ongoing experimentation and is a basis for new ideas, as well as strategies to explore and gain knowledge from the extensive realm of peptide-chelated metals and biotechnologies.


Introduction
Nature has fine-tuned protein sequences, structures, and binding sites over thousands of years.Amino acid building blocks exhibit both chemical and structural versatility, efficiently and specifically binding to other biological macromolecules.Numerous peptides are either naturally occurring or derived from parent proteins through cleavage.As a result, peptides-whether natural, derived or synthetic-are exceptionally well-suited for various purposes and find applications across a wide range of scenarios [1] (see Figure 1).
BioTech 2024, 13   Metal ions have the ability to facilitate the self-assembly of peptides, leading to the formation of supra-molecular structures.These structures are able to serve various functions, such as catalysts [14,15] or forming assemblies with nanocavities that can be modified, potentially enabling enantioselective recognition [16].Figure 3, which is shown below, depicts how metal complexes and peptides create metal-peptide assemblies.Metal ions have the ability to facilitate the self-assembly of peptides, leading to the formation of supra-molecular structures.These structures are able to serve various functions, such as catalysts [14,15] or forming assemblies with nanocavities that can be modified, potentially enabling enantioselective recognition [16].Figure 3, which is shown below, depicts how metal complexes and peptides create metal-peptide assemblies.Metal ions have the ability to facilitate the self-assembly of peptides, leading to the formation of supra-molecular structures.These structures are able to serve various functions, such as catalysts [14,15] or forming assemblies with nanocavities that can be modified, potentially enabling enantioselective recognition [16].Figure 3, which is shown below, depicts how metal complexes and peptides create metal-peptide assemblies.Peptides serve as recognition elements in molecular probes because of their specific binding capabilities [17,18].Additionally, their capacity to bind to metals is employed for direct detection of those metals [19,20].The structure of the gold complex is given in Figure 4 and the Cu(II) and Ni(II) complex in Figure 5, respectively.Metallopeptides are also utilized as electrical probes to identify bacteria [21,22].ions.Secondary amines, carrying different charges depending on the electrolyte's pH, are indicated in red Reprinted/adapted with permission from Ref. [19].2019, Synhaivska et al. [19].Peptides serve as recognition elements in molecular probes because of their specific binding capabilities [17,18].Additionally, their capacity to bind to metals is employed for direct detection of those metals [19,20].The structure of the gold complex is given in Figure 4 and the Cu(II) and Ni(II) complex in Figure 5, respectively.Metallopeptides are also utilized as electrical probes to identify bacteria [21,22].Peptides serve as recognition elements in molecular probes because of their specific binding capabilities [17,18].Additionally, their capacity to bind to metals is employed for direct detection of those metals [19,20].The structure of the gold complex is given in Figure 4 and the Cu(II) and Ni(II) complex in Figure 5, respectively.Metallopeptides are also utilized as electrical probes to identify bacteria [21,22].ions.Secondary amines, carrying different charges depending on the electrolyte's pH, are indicated in red Reprinted/adapted with permission from Ref. [19].2019, Synhaivska et al. [19].ions.Secondary amines, carrying different charges depending on the electrolyte's pH, are indicated in red Reprinted/adapted with permission from Ref. [19].2019, Synhaivska et al. [19].Metal-peptide complexes offer chemical stabilization to the metal through ch Within the food industry, peptides function as chelators, enhancing the bioavaila mineral supplements by safeguarding them against oxidation and altering their so properties [23,24].
Additionally, peptides' metal-binding capacity has been harnessed to enha biocompatibility of gold nanoclusters for imaging [25], and bound lanthanide serv imaging agent [26].Moreover, the specific binding between natural peptides an metals can be utilized for metal remediation [27,28].The structure and biosynthe ways of the complex are given in Figure 6.
Figure 6.The structure and biosynthetic pathways of glutathione (GSH) and phytochelatin explained, utilizing three-letter amino acid codes for abbreviations.(A) In GSH and PC bios there are two and three reactions, respectively.Initially, a cysteine unit binds with the c group of the side chain of a glutamic acid residue to form γ-glutamylcysteine, catalyzed mate-cysteine ligase (GCL).Then, γ-glutamylcysteine combines with a glycine residue to glutathione, catalyzed by glutathione synthetase (GSHS).PC-synthase (PCS) can potenti two or more GSH units to create phytochelatins.(B) Additionally, examples of PC-metal co involving divalent metal cations (M 2+ ) are presented, with cysteine residues highlighted i Figure 5.A new Zn 2+ selective oxytocin-based biosensor that utilizes the terminal amine for surface anchoring, also preventing the response to Cu 2+ Reprinted/adapted with permission from Ref. [20].2019, Mervinetsky et al. [20].
Metal-peptide complexes offer chemical stabilization to the metal through chelation.Within the food industry, peptides function as chelators, enhancing the bioavailability of mineral supplements by safeguarding them against oxidation and altering their solubility properties [23,24].
Additionally, peptides' metal-binding capacity has been harnessed to enhance the biocompatibility of gold nanoclusters for imaging [25], and bound lanthanide serves as an imaging agent [26].Moreover, the specific binding between natural peptides and heavy metals can be utilized for metal remediation [27,28].The structure and biosynthetic pathways of the complex are given in Figure 6.   ) are presented, with cysteine residues highlighted in red Reprinted/adapted with permission from Ref. [27].2020, Balzano et al. [27].
The methods for synthesis, heavy metal toxicity, the biosynthesis of metallothioneins and phytochelatins in microalgae, the interaction of metal complexes with peptides, the functions and nature of zinc signals, structure of metal-peptides, relationship of SAR, and biological activity are reported in the following literature reviews: [1,24,25,27,[29][30][31][32][33][34][35][36][37][38][39].Some metal complexes can be used as potential therapeutics to treat Alzheimer's [29,[40][41][42], neurodegenerative disorders, Wilson's [43], Parkinson's disease [44,45] and Menkes disease [46].The mechanisms of action of these compounds are different and include the modification of DNA/RNA, permeabilization, protein and cell wall synthesis, and modulation of gradients of cellular membranes.Table 1, shown below, provides a list of neurodegenerative disorders and a list of references to articles with a greater focus on them.

Disease References
Alzheimer's [29,[40][41][42] Wilson's [43] Parkinson's [44,45] Menkes [46] We hope that this review will help researchers whose main focus is on inorganic synthesis and reveal the hidden potential in ligand molecules like α-amino acids and peptides.It is worth mentioning that although this review covers literature published in the last two decades, a single review cannot cover all the obtained data.While choosing papers, we took into consideration the potential opportunities for biological activities that might be applicable to researchers in the field, as well as the nature of the transition metal.In the review, we discuss complexes of both traditionally popular metals and essential elements (Cu, Zn, Co, Fe) and non-essential elements (Pd, Pt, Ni, Ag and lanthanides).
It is for this reason that the data presented in this review are classified by the essential and non-essential elements in these ligands, and not by the nature of the ligand molecule.Copper holds a crucial status as a metal that is essential for various biological functions, contributing significantly to both structural integrity and biochemical processes.Facilitating its transportation are specialized copper chaperones, a necessity due to their inherent toxicity, particularly stemming from their capability to transition between their reduced form, Cu(I), and oxidized state, Cu(II) [47].In the realm of structural NMR (Nuclear Magnetic Resonance), the distinction between these two states is stark, as Cu(I) exhibits diamagnetic properties while Cu(II) manifests paramagnetic behavior.The handling of Cu(I) samples poses a primary challenge, demanding meticulous preparation within a glove box environment and ensuring airtight sealing to prevent oxidation upon exposure to air [48].The structure of the copper complex is given in Figure 7.
In exploring the binding sites, both linear and cyclic peptides have served as valuable models, mimicking the conserved sequence essential for copper chaperone interactions.Investigation into their binding modes has been conducted through mutation studies and manipulation of environmental factors.For instance, altering the conserved Met residue within the binding sequence severely hindered copper complexation [44], while adjustments in pH levels led to varying binding modes [49].These findings imply that pH conditions can influence the coordination environment of the metal, highlighting the utility of peptide-metal models in elucidating potential release mechanisms.The possible mechanism of action of copper complex [44] is given in Figure 8.In exploring the binding sites, both linear and cyclic peptides have served as valuable models, mimicking the conserved sequence essential for copper chaperone interactions.Investigation into their binding modes has been conducted through mutation studies and manipulation of environmental factors.For instance, altering the conserved Met residue within the binding sequence severely hindered copper complexation [44], while adjustments in pH levels led to varying binding modes [49].These findings imply that pH conditions can influence the coordination environment of the metal, highlighting the utility of peptide-metal models in elucidating potential release mechanisms.The possible mechanism of action of copper complex [44] is given in Figure 8.Further structural examinations focused on the interaction between Cu(I) and the Nterminal A 16 fragment of amyloid beta (A) and sought to ascertain the involvement of all three His residues in metal ion binding [50].Notably, these studies were conducted on small peptides derived from the binding sites of larger molecules, underscoring their relevance in dissecting intricate molecular interactions.

Copper (II)
Copper(II) stands out as the heaviest among the paramagnetic essential metals, attracting considerable attention in studies involving various metal-binding proteins [51].In exploring the binding sites, both linear and cyclic peptides have served as models, mimicking the conserved sequence essential for copper chaperone inte Investigation into their binding modes has been conducted through mutation stu manipulation of environmental factors.For instance, altering the conserved Met within the binding sequence severely hindered copper complexation [44], while ments in pH levels led to varying binding modes [49].These findings imply that ditions can influence the coordination environment of the metal, highlighting th of peptide-metal models in elucidating potential release mechanisms.The possib anism of action of copper complex [44] is given in Figure 8.Further structural examinations focused on the interaction between Cu(I) an terminal A 16 fragment of amyloid beta (A) and sought to ascertain the involvem three His residues in metal ion binding [50].Notably, these studies were condu small peptides derived from the binding sites of larger molecules, underscoring t evance in dissecting intricate molecular interactions.

Copper (II)
Copper(II) stands out as the heaviest among the paramagnetic essential m tracting considerable attention in studies involving various metal-binding prote Further structural examinations focused on the interaction between Cu(I) and the N-terminal A 16 fragment of amyloid beta (A) and sought to ascertain the involvement of all three His residues in metal ion binding [50].Notably, these studies were conducted on small peptides derived from the binding sites of larger molecules, underscoring their relevance in dissecting intricate molecular interactions.

Copper (II)
Copper(II) stands out as the heaviest among the paramagnetic essential metals, attracting considerable attention in studies involving various metal-binding proteins [51].Research endeavors have employed signal broadening techniques to pinpoint the residues involved in binding [52], with such phenomena often offering insights into the sequence of binding events [53].When proton ( 1 H) spectra exhibit broadening effects, complementary information can be extracted from the corresponding carbon-13 ( 13 C) spectra [54].Typically, these investigations necessitate the initial assignment of the 1H spectrum followed by titration experiments with Cu(II) to identify the specific binding groups.Subsequently, the formation of the bound complex can be confirmed either through experimental means [53] or through computational simulations [55].This allows for the positioning of the Cu(II) ion within the identified binding site, ultimately yielding a detailed depiction of the bound structure.Figure 9 show metal-binding proteins [51], while Figure 10 provides a schematic representation of the proposed structures [52].
Research endeavors have employed signal broadening techniques to pinpoint the residues involved in binding [52], with such phenomena often offering insights into the sequence of binding events [53].When proton ( 1 H) spectra exhibit broadening effects, complementary information can be extracted from the corresponding carbon-13 ( 13 C) spectra [54].Typically, these investigations necessitate the initial assignment of the 1H spectrum followed by titration experiments with Cu(II) to identify the specific binding groups.Subsequently, the formation of the bound complex can be confirmed either through experimental means [53] or through computational simulations [55].This allows for the positioning of the Cu(II) ion within the identified binding site, ultimately yielding a detailed depiction of the bound structure.Figure 9 show metal-binding proteins [51], while Figure 10 provides a schematic representation of the proposed structures [52].Recently, Georgieva et al. proposed the formation of complexes between Cu(II) and hemorphin peptide derivatives in an aqueous solution with a pH of 10.98 [56].Through meticulous examination of spectroscopic data and voltametric calculations, complete agreement has been reached, confirming the formation of stable copper(II) complexes with peptides in aqueous solutions.These complexes exhibit a 1:2 stoichiometry for Cu-H-V, Cu-AH-V, Cu-NH7C, and Cu-NCH7, while a 1:1 stoichiometry is observed for Cu-AC-V and Cu-C-V.Notably, the virucidal activity against human respiratory syncytial virus and adenovirus (HRSV-2) at 30 and 60 min remains weakly affected by these complexes, similar to the starting peptide compounds [56].Figure 11 illustrates the structures of two of these newly identified complexes.Recently, Georgieva et al. proposed the formation of complexes between Cu(II) and hemorphin peptide derivatives in an aqueous solution with a pH of 10.98 [56].Through meticulous examination of spectroscopic data and voltametric calculations, complete agreement has been reached, confirming the formation of stable copper(II) complexes with peptides in aqueous solutions.These complexes exhibit a 1:2 stoichiometry for Cu-H-V, Cu-AH-V, Cu-NH7C, and Cu-NCH7, while a 1:1 stoichiometry is observed for Cu-AC-V and Cu-C-V.Notably, the virucidal activity against human respiratory syncytial virus and adenovirus (HRSV-2) at 30 and 60 min remains weakly affected by these complexes, similar to the starting peptide compounds [56].Figure 11 illustrates the structures of two of these newly identified complexes.Hickey et al. documented the discovery of a copper complex featuring a styrylpyridine group, which exhibited an affinity for Aβ plaques within human brain tissue [42]. Figure 12 depicts the structure of these 64 Cu complexes.
Given the challenges in directly measuring copper(II)-bound complexes, diamagnetic metals with square planar binding geometry often serve as substitutes for deriving the bound structure.Through line-broadening analysis, the position of copper binding can be inferred.If there is experimental evidence indicating similarity in binding modes, Cu(II) can be introduced into structure calculations, enabling the determination of copper(II)-bound structures.This methodology has been successfully applied to peptide-metal complexes utilizing palladium(II) [57], silver(I) [58], and nickel(II) [59,60].
Hickey et al. documented the discovery of a copper complex featuring a styrylpyridine group, which exhibited an affinity for Aβ plaques within human brain tissue [42]. Figure 12 depicts the structure of these 64 Cu complexes.
Line-broadening analysis of proton ( 1 H) spectra has been instrumental in identifying residues involved in binding Cu(II) to model copper(II)-binding sites [61], as well as in copper(II)-mediated aggregation processes [62].Additionally, line-broadening effects in carbon-13 ( 13 C) spectra can be utilized [63], while chemical shift deviations can be monitored through various experiments including 1 H-1 D and 2D 15 N-HSQC, 13 C-HSQC, and 1 H-1 H TOCSY experiments.Furthermore, precise determination of the binding nitrogen in histidine residues has been achieved through proton spin-lattice relaxation rate studies [64].Sun et al. describes the synthesis, design and investigation of transition metal complexes with flexible histidine-containing peptides [65].Copper(II) complexes of glycylglycylglycine peptides were also obtained [66].Copper has the ability to amplify the antimicrobial activity of antibiotics, including viomycin and capreomycin.The complex of copper and viomycin has hydrogen bonds that make it stable and provide helical conformation in the peptide, making the DNA susceptible to strong degradation [67]; the described mechanism is connected to the modulation of the antigenomic δ-ribozyme catalytic activity [68].Given the challenges in directly measuring copper(II)-bound complexes, diamagnetic metals with square planar binding geometry often serve as substitutes for deriving the bound structure.Through line-broadening analysis, the position of copper binding can be inferred.If there is experimental evidence indicating similarity in binding modes, Cu(II) can be introduced into structure calculations, enabling the determination of copper(II)-bound structures.This methodology has been successfully applied to peptidemetal complexes utilizing palladium(II) [57], silver(I) [58], and nickel(II) [59,60].
Line-broadening analysis of proton ( 1 H) spectra has been instrumental in identifying residues involved in binding Cu(II) to model copper(II)-binding sites [61], as well as in copper(II)-mediated aggregation processes [62].Additionally, line-broadening effects in carbon-13 ( 13 C) spectra can be utilized [63], while chemical shift deviations can be monitored through various experiments including 1 H-1 D and 2D 15 N-HSQC, 13 C-HSQC, and 1 H-1 H TOCSY experiments.Furthermore, precise determination of the binding nitrogen in histidine residues has been achieved through proton spin-lattice relaxation rate studies [64].Sun et al. describes the synthesis, design and investigation of transition metal complexes with flexible histidine-containing peptides [65].Copper(II) complexes of glycylglycylglycine peptides were also obtained [66].Copper has the ability to amplify the antimicrobial activity of antibiotics, including viomycin and capreomycin.The complex of copper and viomycin has hydrogen bonds that make it stable and provide helical conformation in the peptide, making the DNA susceptible to strong degradation [67]; the described mechanism is connected to the modulation of the antigenomic δ-ribozyme catalytic activity [68].

Zinc (II)
Zinc stands out as a crucial ion involved in structural, catalytic, and regulatory functions within proteins, being present in approximately 10% of all known proteins [31,58].Notably, zinc finger proteins represent a prominent category among these, showcasing their flexibility and stability through metal-binding interactions.To unravel the intricacies of zinc finger binding, both short and longer peptides have been extensively utilized.These peptides serve as invaluable tools for modeling various aspects of zinc finger behavior, including metal coordination, folding dynamics, and actual binding processes [69][70][71][72].Figure 13 gives a comparison between the α-peptide and oligourea backbones, as well as an illustration of the structures.

Zinc (II)
Zinc stands out as a crucial ion involved in structural, catalytic, and regulatory functions within proteins, being present in approximately 10% of all known proteins [31,58].Notably, zinc finger proteins represent a prominent category among these, showcasing their flexibility and stability through metal-binding interactions.To unravel the intricacies of zinc finger binding, both short and longer peptides have been extensively utilized.These peptides serve as invaluable tools for modeling various aspects of zinc finger behavior, including metal coordination, folding dynamics, and actual binding processes [69][70][71][72].Figure 13 gives a comparison between the α-peptide and oligourea backbones, as well as an illustration of the structures.In the realm of peptide modeling, cyclic peptides featuring linear tails have emerged as particularly promising candidates.These structures exhibit notable conformational and thermodynamic stability when compared to their linear counterparts, effectively mimick ing the zinc-ribbon fold characteristic of zinc fingers.Moreover, cyclic peptides demon strate enhanced binding affinity towards Zn(II) ions, underscoring their utility in zinc fin ger modeling [73].Through peptide-based investigations, insights into secondary struc tural elements common in zinc fingers have been gleaned, shedding light on their pivota In the realm of peptide modeling, cyclic peptides featuring linear tails have emerged as particularly promising candidates.These structures exhibit notable conformational and thermodynamic stability when compared to their linear counterparts, effectively mimicking the zinc-ribbon fold characteristic of zinc fingers.Moreover, cyclic peptides demonstrate enhanced binding affinity towards Zn(II) ions, underscoring their utility in zinc finger modeling [73].Through peptide-based investigations, insights into secondary structural elements common in zinc fingers have been gleaned, shedding light on their pivotal role in both folding and zinc binding processes.Notably, peptide engineering efforts have led to the development of modified peptides that retain tertiary folds and stability comparable to their natural zinc finger protein counterparts, even with substantial alterations to their native residues [74].Figure 14 presents an NMR confirmed structure of ZnL ZR .
semblance (dimensions, handedness, polarity) between the two helical backbones.(b) Applic to the construction of a composite Cys2His2 zinc finger with a ββα fold.(c) Sequence of desi composite zinc finger urea FN3 and the native zinc finger native FN3 derived from Zif268 printed/adapted with permission from Ref. [72].2019, Lombardo et al. [72].
In the realm of peptide modeling, cyclic peptides featuring linear tails have eme as particularly promising candidates.These structures exhibit notable conformationa thermodynamic stability when compared to their linear counterparts, effectively mim ing the zinc-ribbon fold characteristic of zinc fingers.Moreover, cyclic peptides dem strate enhanced binding affinity towards Zn(II) ions, underscoring their utility in zin ger modeling [73].Through peptide-based investigations, insights into secondary s tural elements common in zinc fingers have been gleaned, shedding light on their pi role in both folding and zinc binding processes.Notably, peptide engineering efforts led to the development of modified peptides that retain tertiary folds and stability parable to their natural zinc finger protein counterparts, even with substantial altera to their native residues [74].Figure 14 presents an NMR confirmed structure of ZnLZ The binding of zinc ions can induce significant conformational changes in pep [75], a phenomenon exemplified by its ability to trigger the oligomerization of amy The binding of zinc ions can induce significant conformational changes in peptides [75], a phenomenon exemplified by its ability to trigger the oligomerization of amyloid beta, a 42-amino acid polypeptide associated with Alzheimer's disease.To study such processes effectively, truncated peptides preserving the beta-sheet formation region while minimizing complete oligomerization have been employed.For instance, investigations into the familial Taiwanese mutation D7H region of amyloid beta, which impacts zinc-induced oligomerization, have been facilitated through the use of stable homodimers formed via zinc binding [40,41].Figure 15 below represents the arrangement of Zn ions in solution within the rat Aβ(1-16) dimer complexes.
Furthermore, exploring the resistance of rats to Alzheimer's disease has provided valuable insights into zinc-induced dimerization within amyloid beta proteins.Utilizing truncated peptides, researchers have elucidated the interface involved in zinc-induced dimerization, showcasing a potential avenue for the rational design of drug compounds aimed at disrupting plaque-forming processes.
minimizing complete oligomerization have been employed.For instance, investigat into the familial Taiwanese mutation D7H region of amyloid beta, which impacts z induced oligomerization, have been facilitated through the use of stable homodim formed via zinc binding [40,41].Figure 15   Furthermore, exploring the resistance of rats to Alzheimer's disease has prov valuable insights into zinc-induced dimerization within amyloid beta proteins.Utili truncated peptides, researchers have elucidated the interface involved in zinc-induce merization, showcasing a potential avenue for the rational design of drug compou aimed at disrupting plaque-forming processes.

Cobalt (II) and (III)
Cobalt, existing in both its (II) and (III) oxidation states, though present in t amounts within the body, holds vital significance as an essential element.However, w present in excess, cobalt poses toxicity risks attributed to its capacity for generating r tive oxygen species and displacing iron in metalloenzymes, thereby rendering them i tive [33].Predominantly paramagnetic, cobalt manifests distinct characteristics in its state, where it can adopt both high-and low-spin configurations, the latter being diam netic [33].For instance, the elucidation of a diamagnetic Co(III) complex with a pep porphyrin conjugate was achieved through conventional methodologies [76].Notably large paramagnetic chemical shifts (PCSs) and minimal paramagnetic relaxation enha ments (PRE) exhibited by high-spin Co(II) render it conducive to structure determina [32].Figure 16  The average distance between the Zn 2+ ion and the nitrogen atoms of the His residues (Nd1 and Nε2) is 2.07 ± 0.05 Å Reprinted/adapted with permission from Ref. [40].2012, Istrate et al. [40].

Cobalt (II) and (III)
Cobalt, existing in both its (II) and (III) oxidation states, though present in trace amounts within the body, holds vital significance as an essential element.However, when present in excess, cobalt poses toxicity risks attributed to its capacity for generating reactive oxygen species and displacing iron in metalloenzymes, thereby rendering them inactive [33].Predominantly paramagnetic, cobalt manifests distinct characteristics in its (III) state, where it can adopt both high-and low-spin configurations, the latter being diamagnetic [33].For instance, the elucidation of a diamagnetic Co(III) complex with a peptide-porphyrin conjugate was achieved through conventional methodologies [76].Notably, the large paramagnetic chemical shifts (PCSs) and minimal paramagnetic relaxation enhancements (PRE) exhibited by high-spin Co(II) render it conducive to structure determination [32].Figure 16, Figure 17, and Figure 18 depict the structure of Co(III) complexes including light-activated Co(III) prodrugs; the general mechanism of action of cobalt complexes for delivering drugs through reduction activation; the molecular structure of Co(III)-mimochrome IV in stereo view, representing the average structure derived from both NMR experimental data and RMD calculations, respectively.
delivering drugs through reduction activation; the molecular structure of Co(III)-mimochrome IV in stereo view, representing the average structure derived from both NMR experimental data and RMD calculations, respectively.Similarly, the binding site of a cobalt(III)-Schiff base complex to another amyloid beta protein fragment was elucidated using 1 H-NMR, with binding histidines identified through line-broadening effects [77].Figure 19 presents transition metal complex suggestions.Similarly, the binding site of a cobalt(III)-Schiff base complex to another amyloid beta protein fragment was elucidated using 1 H-NMR, with binding histidines identified through line-broadening effects [77].Figure 19 presents transition metal complex suggestions.
delivering drugs through reduction activation; the molecular structure of Co(III)-mimo chrome IV in stereo view, representing the average structure derived from both NMR ex perimental data and RMD calculations, respectively.Similarly, the binding site of a cobalt(III)-Schiff base complex to another amyloid beta protein fragment was elucidated using 1 H-NMR, with binding histidines identified through line-broadening effects [77].Figure 19 presents transition metal complex sugges tions.Similarly, the binding site of a cobalt(III)-Schiff base complex to another amyloid beta protein fragment was elucidated using 1 H-NMR, with binding histidines identified through line-broadening effects [77].Figure 19 presents transition metal complex suggestions.Further insights into cobalt binding were gleaned from an investigation into cobalt(II) binding to fibrinopeptide B, a factor implicated in thrombosis.Although the peptide structures were determined in the presence of cobalt(II) and gadolinium(III), the metal ions were not visualized within the structures [78].Moreover, a 30-amino acid peptide initially recognized for its manganese-binding capabilities, derived from a decapeptide repeat in the calcium protein Cap43, was also found to exhibit affinity for Co(II).Line-broadening observed during the interaction enabled the identification of binding histidine residues, while the pH range conducive to binding was elucidated as part of the binding mechanism.Subsequent modeling efforts generated and minimized postulated coordination spheres of Co(II) based on NMR data, utilizing software like HyperChem™ [79]. Figure 20  Further insights into cobalt binding were gleaned from an investigation into cobalt(II) binding to fibrinopeptide B, a factor implicated in thrombosis.Although the peptide structures were determined in the presence of cobalt(II) and gadolinium(III), the metal ions were not visualized within the structures [78].Moreover, a 30-amino acid peptide initially recognized for its manganese-binding capabilities, derived from a decapeptide repeat in the calcium protein Cap43, was also found to exhibit affinity for Co(II).Line-broadening observed during the interaction enabled the identification of binding histidine residues, while the pH range conducive to binding was elucidated as part of the binding mechanism.Subsequent modeling efforts generated and minimized postulated coordination spheres of Co(II) based on NMR data, utilizing software like HyperChem™ [79].Additionally, the conformational alterations of peptides upon binding to chiral cobalt oxide nanoparticles were investigated to explore chiral evolution phenomena.Tripeptide ligands exhibited distinct peak sets attributed to the high PCS of the nanoparticles, facilitating structure determination owing to their minimal PRE effects [80].

Iron (II) and (III)
Iron stands as an indispensable element crucial for oxygen transport within the body, with both excess and deficiency leading to various disorders [34,35].Existing in both ferric and ferrous forms, iron exhibits paramagnetic properties, and the interconversion between these forms plays a central role in its functionality.Given the facile oxygenation of ferrous to ferric iron ions, meticulous sample preparation within an oxygen-free glove box environment is imperative to mitigate undesired reactions.The following studies underscore innovative strategies for investigating iron, highlighting the efficacy of a multidisciplinary approach.Figure 21 below illustrates the circulation and distribution of iron within the human body.Additionally, the conformational alterations of peptides upon binding to chiral cobalt oxide nanoparticles were investigated to explore chiral evolution phenomena.Tripeptide ligands exhibited distinct peak sets attributed to the high PCS of the nanoparticles, facilitating structure determination owing to their minimal PRE effects [80].

Iron (II) and (III)
Iron stands as an indispensable element crucial for oxygen transport within the body, with both excess and deficiency leading to various disorders [34,35].Existing in both ferric and ferrous forms, iron exhibits paramagnetic properties, and the interconversion between these forms plays a central role in its functionality.Given the facile oxygenation of ferrous to ferric iron ions, meticulous sample preparation within an oxygen-free glove box environment is imperative to mitigate undesired reactions.The following studies underscore innovative strategies for investigating iron, highlighting the efficacy of a multidisciplinary approach.Figure 21 below illustrates the circulation and distribution of iron within the human body.1) prior to its uptake at the apical membrane of enterocytes via DMT1(2).Fe 2+ can then be directly used for intracellular mechanisms, stored when bound to ferritin or released directly into the circulation (3).( 4) Therefore, reduced iron Fe 2+ is transported by ferroportin (FPN), the only known iron exporter so far, and then oxidized by hephaestin Hp to be then bound to Tf (5).Most of the iron resent in the circulation is bound to Tf.As a result, erythrocyte precursors (erythroblasts) take up this transferrin-bound iron via TfR1 (6).Fe 3+ bound to transferrin is reduced in the endosome by ferrireductase STEAP3 to Fe 2+ (7) where it is exported via DMT1 (8) into the cytosol and enters the labile iron pool.Mature RBCs circulate in the blood for around 120 days (9) until they are removed from the circulation during rythrophagocytosis.The illustration was created using BioRender.com(accessed on 3 April 2021) Reprinted/adapted with permission from Ref. [35].2021, Vogt et al. [35].

Figure 21.
Iron distribution and circulation.Nonheme dietary iron Fe 3+ is reduced to Fe 2+ by the iron reducing DCYTB (1) prior to its uptake at the apical membrane of enterocytes via DMT1(2).Fe 2+ can then be directly used for intracellular mechanisms, stored when bound to ferritin or released directly into the circulation (3).( 4) Therefore, reduced iron Fe 2+ is transported by ferroportin (FPN), the only known iron exporter so far, and then oxidized by hephaestin Hp to be then bound to Tf (5).Most of the iron resent in the circulation is bound to Tf.As a result, erythrocyte precursors (erythroblasts) take up this transferrin-bound iron via TfR1 (6).Fe 3+ bound to transferrin is reduced in the endosome by ferrireductase STEAP3 to Fe 2+ (7) where it is exported via DMT1 (8) into the cytosol and enters the labile iron pool.Mature RBCs circulate in the blood for around 120 days (9) until they are removed from the circulation during rythrophagocytosis.The illustration was created using BioRender.com(accessed on 3 April 2021) Reprinted/adapted with permission from Ref. [35].2021, Vogt et al. [35].
Detection of iron binding is notably achieved through the observation of line-broadening effects proximal to the binding site.For instance, a study involving the grafting of a six-residue iron-binding motif onto a 29-residue peptide utilized NMR spectroscopy to discern line-broadening phenomena indicative of specific interactions between the peptide and Fe(III) ions.Complementary techniques such as circular dichroism, isothermal titration calorimetry, capillary zone electrophoresis, thermal denaturation, and computational modeling were employed to elucidate the binding mode and structure of the peptide model system [81].In magnetotactic bacteria, biomineralization processes are governed by magnetite-associated proteins featuring short sequences capable of binding iron.Peptides derived from these iron-binding regions were subjected to reactions with Fe(II), Fe(III), Ni(II), and Zn(II) ions, enabling the determination of specificity, binding coefficients, and key binding residues through NMR spectroscopy.Subsequent coprecipitation assays were employed to ascertain the significance of each binding residue [82].Additionally, computational methodologies were integrated with NMR spectroscopy to elucidate the structures of artificial peptides forming chiral helicate complexes with Fe(II) and Co(II) ions [83].Furthermore, the utility of 1D and 2D NMR techniques capable of directly detecting paramagnetic complexes was demonstrated using the eight-amino acid microperoxidase-8 bound with heme iron as a model peptide for the cytochrome C binding site.Excitation sculpting with gradients was employed to suppress water signals in Fe(II)-bound samples for acquiring 1D spectra, while a superWEFT pulse sequence was utilized for measuring Fe(III)-bound samples [84,85].

Some Non-Essential Elements
A variety of non-essential metals have been implicated in contributing to the pathogenesis of Alzheimer's disease, prompting investigations into their interactions with amyloid beta-derived peptides to unravel potential mechanisms of action.For instance, studies have explored the interactions of aluminum and palladium with these peptides [57,86].Figure 22 depicts the overlap of Aβ12 structures with and without, and Figure 23 represents the three-dimensional arrangement of the Pd(Aβ4-16) complex.
ening effects proximal to the binding site.For instance, a study involving the grafting of a six-residue iron-binding motif onto a 29-residue peptide utilized NMR spectroscopy to discern line-broadening phenomena indicative of specific interactions between the peptide and Fe(III) ions.Complementary techniques such as circular dichroism, isothermal titration calorimetry, capillary zone electrophoresis, thermal denaturation, and computational modeling were employed to elucidate the binding mode and structure of the peptide model system [81].In magnetotactic bacteria, biomineralization processes are governed by magnetite-associated proteins featuring short sequences capable of binding iron.Peptides derived from these iron-binding regions were subjected to reactions with Fe(II), Fe(III), Ni(II), and Zn(II) ions, enabling the determination of specificity, binding coefficients, and key binding residues through NMR spectroscopy.Subsequent coprecipitation assays were employed to ascertain the significance of each binding residue [82].Additionally, computational methodologies were integrated with NMR spectroscopy to elucidate the structures of artificial peptides forming chiral helicate complexes with Fe(II) and Co(II) ions [83].Furthermore, the utility of 1D and 2D NMR techniques capable of directly detecting paramagnetic complexes was demonstrated using the eight-amino acid microperoxidase-8 bound with heme iron as a model peptide for the cytochrome C binding site.Excitation sculpting with gradients was employed to suppress water signals in Fe(II)bound samples for acquiring 1D spectra, while a superWEFT pulse sequence was utilized for measuring Fe(III)-bound samples [84,85].

Some Non-Essential Elements
A variety of non-essential metals have been implicated in contributing to the pathogenesis of Alzheimer's disease, prompting investigations into their interactions with amyloid beta-derived peptides to unravel potential mechanisms of action.For instance, studies have explored the interactions of aluminum and palladium with these peptides [57,86].Figure 22 depicts the overlap of Aβ12 structures with and without, and Figure 23 represents the three-dimensional arrangement of the Pd(Aβ4-16) complex.Nickel NMR measurements serve as a valuable tool for detecting the binding of nickel ions in diamagnetic form, thereby serving as a model for understanding the behavior of paramagnetic ions that may otherwise pose challenges for structural characterization [87].Studies comparing different forms of nickel-binding peptides offer insights into the role of nickel complexation in peptide structure and hint at the potential roles of par-Figure 23.The 3D structure of Pd(Aβ4-16) complex included the N-terminal ATCUN/NTS motif binding the Pd(II) ion Reprinted/adapted with permission from Ref. [57].2020, Mital et al. [57].
Nickel NMR measurements serve as a valuable tool for detecting the binding of nickel ions in diamagnetic form, thereby serving as a model for understanding the behavior of paramagnetic ions that may otherwise pose challenges for structural characterization [87].Studies comparing different forms of nickel-binding peptides offer insights into the role of nickel complexation in peptide structure and hint at the potential roles of paramagnetic ions.The amino-terminal copper-and nickel-binding (ATCUN) motif, found in numerous proteins, has been extensively investigated using linear and cyclic peptide models with various divalent ions, including Co(II), Ni(II), and others [50,88].Nickel itself has been implicated in metal-induced toxicity and carcinogenesis, prompting studies on Ni(II)peptide models derived from the C-terminal of histone H2B to elucidate potential roles in carcinogenesis [89].Additionally, interactions of Ni(II) with peptides derived from the human Toll-like receptor (hTLR4) have been studied due to nickel's ability to elicit allergic responses [90].Figure 24 illustrates the configuration of the Pd(II) complex [58], and Figure 25 shows the stereo view of the superimposed 20 lowest energy structures of Ni 2+ -H2B 105-112 obtained from NMR data [89].
Nickel NMR measurements serve as a valuable tool for detecting the binding of nickel ions in diamagnetic form, thereby serving as a model for understanding the behavior of paramagnetic ions that may otherwise pose challenges for structural characterization [87].Studies comparing different forms of nickel-binding peptides offer insights into the role of nickel complexation in peptide structure and hint at the potential roles of paramagnetic ions.The amino-terminal copper-and nickel-binding (ATCUN) motif, found in numerous proteins, has been extensively investigated using linear and cyclic peptide models with various divalent ions, including Co(II), Ni(II), and others [50,88].Nickel itself has been implicated in metal-induced toxicity and carcinogenesis, prompting studies on Ni(II)-peptide models derived from the C-terminal of histone H2B to elucidate potential roles in carcinogenesis [89].Additionally, interactions of Ni(II) with peptides derived from the human Toll-like receptor (hTLR4) have been studied due to nickel's ability to elicit allergic responses [90].Figure 24 illustrates the configuration of the Pd(II) complex [58], and Figure 25 shows the stereo view of the superimposed 20 lowest energy structures of Ni 2+ -H2B105-112 obtained from NMR data [89].Gallium, a diamagnetic ion, has been shown to effectively substitute Fe(III) binding in Fe2S2 clusters while preserving the overall structure [91].Palladium, also diamagnetic, has been utilized as a model for Cu(II) binding in amyloid beta-derived peptides and prion protein peptide derivatives due to its similar square planar geometry [57,92].Investigations into the pH dependence of palladium coordination using Pd(II)-peptide com- Gallium, a diamagnetic ion, has been shown to effectively substitute Fe(III) binding in Fe2S2 clusters while preserving the overall structure [91].Palladium, also diamagnetic, has been utilized as a model for Cu(II) binding in amyloid beta-derived peptides and prion protein peptide derivatives due to its similar square planar geometry [57,92].Investigations into the pH dependence of palladium coordination using Pd(II)-peptide complexes have further expanded our understanding [93].Tsiveriotis et al. presented the interaction of histidyl containing peptides with Pt(II) and Pd(II) [94]. Figure 26   Gallium, a diamagnetic ion, has been shown to effectively substitute Fe(III) binding in Fe2S2 clusters while preserving the overall structure [91].Palladium, also diamagnetic, has been utilized as a model for Cu(II) binding in amyloid beta-derived peptides and prion protein peptide derivatives due to its similar square planar geometry [57,92].Investigations into the pH dependence of palladium coordination using Pd(II)-peptide complexes have further expanded our understanding [93].Tsiveriotis et al. presented the interaction of histidyl containing peptides with Pt(II) and Pd(II) [94]. Figure 26    The structure of some metal complexes with Pd(II) Reprinted/adapted with permission from Ref. [94].1999, Tsiveriotis et al. [94].
New square planar bis-chelated palladium amino acid complexes with proline and proline homologs were obtained [95].The structures of novel catalyst complexes were established by X-ray analysis.Figure 28 presents the chelate structure of metal complexes containing Pd(II).
New square planar bis-chelated palladium amino acid complexes with proline and proline homologs were obtained [95].The structures of novel catalyst complexes were established by X-ray analysis.Figure 28 presents the chelate structure of metal complexes containing Pd(II).Silver, a toxic diamagnetic ion, interacts with the human copper transporter 1 (hCtr1).Structural studies involving an Ag(I) complex with a micelle-bound peptide derived from hCtr1 have suggested that the membrane surface may influence the structure of the extracellular domain of the protein and its binding to Ag(I) [96].Similarly, studies on peptides derived from the human copper transporter 2 (hCtr2) have shown that Ag(I) binding occurs when the peptide is in its trimeric form [58]. Figure 29 displays a collection of backbone atoms from 20 structures with the most favorable target functions for the wild-type peptide in SDS micellar solution.Silver, a toxic diamagnetic ion, interacts with the human copper transporter 1 (hCtr1).Structural studies involving an Ag(I) complex with a micelle-bound peptide derived from hCtr1 have suggested that the membrane surface may influence the structure of the extracellular domain of the protein and its binding to Ag(I) [96].Similarly, studies on peptides derived from the human copper transporter 2 (hCtr2) have shown that Ag(I) binding occurs when the peptide is in its trimeric form [58]. Figure 29 displays a collection of backbone atoms from 20 structures with the most favorable target functions for the wild-type peptide in SDS micellar solution.Platinum, another diamagnetic metal with potent anticancer properties, has been studied for its binding with a peptide comprising the receptor binding sequence of transferrin, employing titration followed by NMR to determine the binding [97].
Lanthanides, mostly paramagnetic, are frequently used as shift reagents to monitor significant changes in chemical shift that occur in their proximity.Studies involving lanthanides and peptides have aimed at conjugating lanthanide-peptide complexes to proteins to leverage the shift reagent properties on the protein structure.For example, NMRderived structures of fibrinopeptide B in the presence of salts, including Ga(III), have been elucidated [89].Additionally, investigations into the binding properties of small peptides derived from Ca(II)-binding sites with toxic lanthanides such as La(III), Eu(III), and Tb(III) have been conducted to evaluate their potential for diagnostic use as contrast agents [98] The structure of La(III) complexes [98] is given in Figure 30.The metal complexes of Y(III) La(III), Ce(III), Pr(III) and Nd(III) with glycyi-L-proline were synthesized by Sandhu et al [99].The summary table with some essential and non-essential elements is given in Table 2.   Platinum, another diamagnetic metal with potent anticancer properties, has been studied for its binding with a peptide comprising the receptor binding sequence of transferrin, employing titration followed by NMR to determine the binding [97].
Lanthanides, mostly paramagnetic, are frequently used as shift reagents to monitor significant changes in chemical shift that occur in their proximity.Studies involving lanthanides and peptides have aimed at conjugating lanthanide-peptide complexes to proteins to leverage the shift reagent properties on the protein structure.For example, NMR-derived structures of fibrinopeptide B in the presence of salts, including Ga(III), have been elucidated [89].Additionally, investigations into the binding properties of small peptides derived from Ca(II)-binding sites with toxic lanthanides such as La(III), Eu(III), and Tb(III) have been conducted to evaluate their potential for diagnostic use as contrast agents [98].The structure of La(III) complexes [98] is given in Figure 30.The metal complexes of Y(III), La(III), Ce(III), Pr(III) and Nd(III) with glycyi-L-proline were synthesized by Sandhu et al. [99].The summary table with some essential and non-essential elements is given in Table 2. Platinum, another diamagnetic metal with potent anticancer properties, has been studied for its binding with a peptide comprising the receptor binding sequence of transferrin, employing titration followed by NMR to determine the binding [97].
Lanthanides, mostly paramagnetic, are frequently used as shift reagents to monitor significant changes in chemical shift that occur in their proximity.Studies involving lanthanides and peptides have aimed at conjugating lanthanide-peptide complexes to proteins to leverage the shift reagent properties on the protein structure.For example, NMRderived structures of fibrinopeptide B in the presence of salts, including Ga(III), have been elucidated [89].Additionally, investigations into the binding properties of small peptides derived from Ca(II)-binding sites with toxic lanthanides such as La(III), Eu(III), and Tb(III) have been conducted to evaluate their potential for diagnostic use as contrast agents [98].The structure of La(III) complexes [98] is given in Figure 30.The metal complexes of Y(III), La(III), Ce(III), Pr(III) and Nd(III) with glycyi-L-proline were synthesized by Sandhu et al. [99].The summary table with some essential and non-essential elements is given in Table 2.

Conclusions
In summary, essential metals play pivotal roles in various biological processes, ranging from oxygen transport to enzymatic catalysis.Their involvement in structural integrity, regulation, and signaling underscores their indispensability for life.While their deficiency can lead to debilitating disorders, excess levels can result in toxicity and disease.Through meticulous research spanning diverse methodologies, scientists have elucidated the intricate mechanisms underlying the interactions of essential metals with peptides and proteins, shedding light on their physiological functions and potential implications in diseases such as Alzheimer's.Furthermore, ongoing exploration of metal-peptide interactions holds promise for the development of novel therapeutic strategies and diagnostic tools.Thus, understanding the roles of essential metals in biological systems remains a cornerstone in advancing our knowledge of human health and disease.
In conclusion, the intricate interplay between non-essential metals and peptides underscores the multifaceted nature of their interactions and their potential implications in various biological processes and diseases, such as Alzheimer's disease and carcinogenesis.Through diverse methodologies ranging from NMR spectroscopy to computational modeling, researchers have elucidated the binding modes, structural changes, and functional consequences of these interactions.Investigations into metals like nickel, palladium, silver, and platinum have provided valuable insights into their roles in toxicity, carcinogenesis, and therapeutic potential.Furthermore, studies involving lanthanides have offered novel approaches for utilizing their paramagnetic properties as shift reagents for structural analysis.Continued exploration of these metal-peptide interactions promises to deepen our understanding of their biological significance and may pave the way for the development of novel diagnostic and therapeutic strategies in various fields of medicine and biotechnology.

Figure 1 .
Figure 1.Different applications of bioactive peptides for humans.

Figure 5 .
Figure 5.A new Zn 2+ selective oxytocin-based biosensor that utilizes the terminal amine fo anchoring, also preventing the response to Cu 2+ Reprinted/adapted with permission from 2019, Mervinetsky et al. [20].

Figure 6 .
Figure 6.The structure and biosynthetic pathways of glutathione (GSH) and phytochelatin (PC) are explained, utilizing three-letter amino acid codes for abbreviations.(A)In GSH and PC biosynthesis, there are two and three reactions, respectively.Initially, a cysteine unit binds with the carboxylic group of the side chain of a glutamic acid residue to form γ-glutamylcysteine, catalyzed by glutamate-cysteine ligase (GCL).Then, γ-glutamylcysteine combines with a glycine residue to produce glutathione, catalyzed by glutathione synthetase (GSHS).PC-synthase (PCS) can potentially bind two or more GSH units to create phytochelatins.(B) Additionally, examples of PC-metal complexes involving divalent metal cations (M 2+ ) are presented, with cysteine residues highlighted in red Reprinted/adapted with permission from Ref.[27].2020, Balzano et al.[27].

Figure 9 .
Figure 9. Metal-binding proteins presented by Bertini et al.MOLMOL 59 stereo representations of (A) the "sausage" diagram of the superimposed 35 DYANA backbone structures of oxidized Synechocystis PCC6803 plastocyanin; (B) the restrained energy-minimized DYANA mean structure of oxidized Synechocystis PCC6803 plastocyanin, showing the elements of the secondary structure in different colors.The copper atom is shown in green at the top of the model.The four ligands (His39, Cys83, His86, and Met91) are represented as ball-and-stick colored according to the CPK code Reprinted/adapted with permission from Ref. [51].2011, Bertini et al. [51].

Figure 9 .
Figure 9. Metal-binding proteins presented by Bertini et al.MOLMOL 59 stereo representations of (A) the "sausage" diagram of the superimposed 35 DYANA backbone structures of oxidized Synechocystis PCC6803 plastocyanin; (B) the restrained energy-minimized DYANA mean structure of oxidized Synechocystis PCC6803 plastocyanin, showing the elements of the secondary structure in different colors.The copper atom is shown in green at the top of the model.The four ligands (His39, Cys83, His86, and Met91) are represented as ball-and-stick colored according to the CPK code Reprinted/adapted with permission from Ref. [51].2011, Bertini et al. [51].

2 Figure 13 .
Figure 13.Design guided by the structure of composite proteins containing artificial helical folda mer region.(a) Comparison of α-peptide (green) and oligourea (orange) backbones and overlay o their helical structures (α-helical tetrapeptide vs. 2.5-helical triurea) illustrating the structural re semblance (dimensions, handedness, polarity) between the two helical backbones.(b) Applicatio to the construction of a composite Cys2His2 zinc finger with a ββα fold.(c) Sequence of designe composite zinc finger urea FN3 and the native zinc finger native FN3 derived from Zif268 Re printed/adapted with permission from Ref. [72].2019, Lombardo et al. [72].

Figure 13 .
Figure 13.Design guided by the structure of composite proteins containing artificial helical foldamer region.(a) Comparison of α-peptide (green) and oligourea (orange) backbones and overlay of their helical structures (α-helical tetrapeptide vs. 2.5-helical triurea) illustrating the structural resemblance (dimensions, handedness, polarity) between the two helical backbones.(b) Application to the construction of a composite Cys2His2 zinc finger with a ββα fold.(c) Sequence of designed composite zinc finger urea FN3 and the native zinc finger native FN3 derived from Zif268 Reprinted/adapted with permission from Ref. [72].2019, Lombardo et al. [72].

Figure 14 .
Figure 14.Solution structure of ZnLZR (pH 6.3, 298 K) deduced from NMR studies.(A) Superi sition of the 10 lowest energy structures calculated using XPLOR.All side chains except those o D Pro-Pro motif and that of the lysine serving as branching point between the cycle and the tail removed for clarity.(B) Lowest-energy structure with the six NH•••S hydrogen bonds display black dashed lines.(C) Superimposition of the lowest-energy structure of Zn•LZR (green) wit zinc-ribbon domains of the subunit 9 of Thermococcus celer RNA polymerase II (blue, pdb 1QYP (D) Clostridium pasteurianum Zn loaded rubredoxin (blue, pdb 1IRN) Reprinted/adapted with mission from Ref. [73].2013, Jacques et al. [73].

Figure 14 .
Figure 14.Solution structure of ZnL ZR (pH 6.3, 298 K) deduced from NMR studies.(A) Superimposition of the 10 lowest energy structures calculated using XPLOR.All side chains except those of the D Pro-Pro motif and that of the lysine serving as branching point between the cycle and the tail were removed for clarity.(B) Lowest-energy structure with the six NH•••S hydrogen bonds displayed as black dashed lines.(C) Superimposition of the lowest-energy structure of Zn•L ZR (green) with the zinc-ribbon domains of the subunit 9 of Thermococcus celer RNA polymerase II (blue, pdb 1QYP) and (D) Clostridium pasteurianum Zn loaded rubredoxin (blue, pdb 1IRN) Reprinted/adapted with permission from Ref. [73].2013, Jacques et al. [73].
below represents the arrangement of Zn ion solution within the rat Aβ(1-16) dimer complexes.

Figure 15 .
Figure 15.Structure of the rat Aβ(1-16) dimer complexes with Zn ions in solution (the 20 N conformers have been deposited in the Protein Data Bank with accession code 2LI9).Only the b bone atoms (Cα, C, and N) and the side chains of the His residues are shown.Chains A and B o dimer are shown in red and blue, respectively.The N-and C-termini of both chains are labeled The family of 20 calculated NMR structures.(B) Coordination of the zinc ion by the histidine dues in the representative structure after additional QM/MM geometry optimization.The ave distance between the Zn 2+ ion and the nitrogen atoms of the His residues (Nd1 and Nε2) is 2 0.05 Å Reprinted/adapted with permission from Ref. [40].2012, Istrate et al. [40].
, Figure 17, and Figure 18 depict the structure of Co(III) complexes inclu light-activated Co(III) prodrugs; the general mechanism of action of cobalt complexe

Figure 15 .
Figure 15.Structure of the rat Aβ(1-16) dimer complexes with Zn ions in solution (the 20 NMR conformers have been deposited in the Protein Data Bank with accession code 2LI9).Only the backbone atoms (Cα, C, and N) and the side chains of the His residues are shown.Chains A and B of the dimer are shown in red and blue, respectively.The N-and C-termini of both chains are labeled.(A) The family of 20 calculated NMR structures.(B) Coordination of the zinc ion by the histidine residues in the representative structure after additional QM/MM geometry optimization.The average distance between the Zn 2+ ion and the nitrogen atoms of the His residues (Nd1 and Nε2) is 2.07 ± 0.05 Å Reprinted/adapted with permission from Ref.[40].2012, Istrate et al.[40].

Figure 18 .
Figure 18.Molecular structure of Co(III)-mimochrome IV.Stereo view of the average structure, as obtained from NMR experimental data and RMD calculations Reprinted/adapted with permission from Ref. [76].2003, Lombardi et al. [76].

Figure 18 .
Figure 18.Molecular structure of Co(III)-mimochrome IV.Stereo view of the average structure, as obtained from NMR experimental data and RMD calculations Reprinted/adapted with permission from Ref. [76].2003, Lombardi et al. [76].

Figure 18 .
Figure 18.Molecular structure of Co(III)-mimochrome IV.Stereo view of the average structure, a obtained from NMR experimental data and RMD calculations Reprinted/adapted with permission from Ref. [76].2003, Lombardi et al. [76].

Figure 18 .
Figure 18.Molecular structure of Co(III)-mimochrome IV.Stereo view of the average structure, as obtained from NMR experimental data and RMD calculations Reprinted/adapted with permission from Ref. [76].2003, Lombardi et al. [76]. 105

27 Figure 19 .
Figure 19.Transition metal complexes proposed by Heffern et al. (A) Amyloid-b (Ab) peptides used in these studies.Ab16 was used as a soluble peptide model to understand the interactions between Co-sb complexes and the N terminus of the Ab peptide.Ab42 was used to understand the effects of Co-sb complexes on peptide oligomerization and synaptic binding.(B) Transition metal complexes and naming schemes used in this work.Co-acacen and Co-benacen are Co-sb complexes that can coordinate His residues through dissociative ligand exchange of the axial ammines.The behavior of Co-sb on modulating Ab was compared to Pt-phen, a Pt II complex previously shown to disrupt Ab-induced neurotoxicity.(C) Proposed scheme of the modulation of Ab activity by Co-acacen.Coacacen is believed to coordinate the His residues of Ab through the two axial positions.Computational studies suggest the simultaneous coordination of His6 and either His13 or His14 as the most stable conformation.His coordination alters the Ab structure, disrupting oligomerization pathways and synaptic binding Reprinted/adapted with permission from Ref. [77].2014, Heffern et al. [77].
Figure 20 displays the model depicting the probable coordination spheres of Co(II) with the multi-histidine peptide fragment.

Figure 21 .
Figure 21.Iron distribution and circulation.Nonheme dietary iron Fe3+ is reduced to Fe 2+ by the iron reducing DCYTB (1) prior to its uptake at the apical membrane of enterocytes via DMT1(2).Fe 2+ can then be directly used for intracellular mechanisms, stored when bound to ferritin or released directly into the circulation (3).(4) Therefore, reduced iron Fe 2+ is transported by ferroportin (FPN), the only known iron exporter so far, and then oxidized by hephaestin Hp to be then bound to Tf(5).Most of the iron resent in the circulation is bound to Tf.As a result, erythrocyte precursors (erythroblasts) take up this transferrin-bound iron via TfR1(6).Fe 3+ bound to transferrin is reduced in the endosome by ferrireductase STEAP3 to Fe 2+(7) where it is exported via DMT1 (8) into the cytosol and enters the labile iron pool.Mature RBCs circulate in the blood for around 120 days (9) until they are removed from the circulation during rythrophagocytosis.The illustration was created using BioRender.com(accessed on 3 April 2021) Reprinted/adapted with permission from Ref.[35].2021, Vogt et al.[35].

Figure 22 .
Figure 22.The structures of Ab12 with (green) and without metal (orange).Proposed binding sites of aluminium metal are also shown.C-terminus binding site has relatively lower energy, and is also compatible with NMR studies Reprinted/adapted with permission from Ref.[86].2013, Narayan et al.[86].

Figure 22 . 27 Figure 23 .
Figure 22.The structures of Ab12 with (green) and without metal (orange).Proposed binding sites of aluminium metal are also shown.C-terminus binding site has relatively lower energy, and is also compatible with NMR studies Reprinted/adapted with permission from Ref. [86].2013, Narayan et al. [86].BioTech 2024, 5, x FOR PEER REVIEW 17 of 27

Figure 24 .
Figure 24.The structure of Pd(II) complex reported by Mital et al.The 3D structure of Phe-Arg-Hisamide (FRH) peptide represented the N-terminal ATCUN/NTS motif saturated with Pd(II) ions based on collected NMR constraints and crystallographic data available for GGH tripeptides Reprinted/adapted with permission from Ref. [57].2020, Mital et al. [57].

Figure 24 . 27 Figure 25 .
Figure 24.The structure of Pd(II) complex reported by Mital et al.The 3D structure of Phe-Arg-His-amide (FRH) peptide represented the N-terminal ATCUN/NTS motif saturated with Pd(II) ions based on collected NMR constraints and crystallographic data available for GGH tripeptides Reprinted/adapted with permission from Ref. [57].2020, Mital et al. [57].BioTech 2024, 5, x FOR PEER REVIEW 18 of 27
depicts the chelate structure of metal complexes containing Pt(II) and Pd(II), and Figure 27 represents the configuration of certain metal complexes containing Pd(II).
depicts the chelate structure of metal complexes containing Pt(II) and Pd(II), and Figure 27 represents the configuration of certain metal complexes containing Pd(II).

Figure 28 .
Figure28.Compound structures and numbering scheme for proline and proline homolog complexes.Stereochemistry is shown at all chiral centers Reprinted/adapted with permission from Ref.[95].2019, Hobart et al.[95].

Figure 28 .
Figure 28.Compound structures and numbering scheme for proline and proline homolog complexes.Stereochemistry is shown at all chiral centers Reprinted/adapted with permission from Ref.[95].2019, Hobart et al.[95].

Figure 29 .
Figure 29.Ensemble of backbone atoms of 20 structures with the lowest target functions for the WT peptide in SDS micellar solution Reprinted/adapted with permission from Ref. [96].2013, Wang et al. [96].

Figure 30 .
Figure 30.NMR structure of LaP 2 .Left: lowest energy ball-and-stick structure, stabilizing interactions represented as orange lines; middle: superimposition of the backbones and Trp side chains of the 10 lowest energy structures; right: superimposition of the 10 lowest energy structures (backbone and Trp side chain: sticks, coordinating side chain: lines) Reprinted/adapted with permission from Ref. [98].2009, Cisnetti et al. [98].

Figure 29 .
Figure 29.Ensemble of backbone atoms of 20 structures with the lowest target functions for the WT peptide in SDS micellar solution Reprinted/adapted with permission from Ref. [96].2013, Wang et al. [96].

Figure 29 .
Figure 29.Ensemble of backbone atoms of 20 structures with the lowest target functions for the WT peptide in SDS micellar solution Reprinted/adapted with permission from Ref. [96].2013, Wang et al. [96].

Figure 30 .
Figure 30.NMR structure of LaP 2 .Left: lowest energy ball-and-stick structure, stabilizing interactions represented as orange lines; middle: superimposition of the backbones and Trp side chains of the 10 lowest energy structures; right: superimposition of the 10 lowest energy structures (backbone and Trp side chain: sticks, coordinating side chain: lines) Reprinted/adapted with permission from Ref. [98].2009, Cisnetti et al. [98].

Figure 30 .
Figure 30.NMR structure of LaP 2 .Left: lowest energy ball-and-stick structure, stabilizing interactions represented as orange lines; middle: superimposition of the backbones and Trp side chains of the 10 lowest energy structures; right: superimposition of the 10 lowest energy structures (backbone and Trp side chain: sticks, coordinating side chain: lines) Reprinted/adapted with permission from Ref. [98].2009, Cisnetti et al. [98].

Table 1 .
Some diseases and articles related to them

Table 1 .
Various diseases and articles related to them.
Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd Pd

Table 2 .
Summary table with some essential and non-essential elements.

Table 2 .
Summary table with some essential and non-essential elements.

Table 2 .
Summary table with some essential and non-essential elements.