Boranils: Versatile Multifunctional Organic Fluorophores for Innovative Applications

: Multifunctional stimuli-responsive ﬂuorophores showing bright environment-sensitive emissions have fueled intense research due to their innovative applications in the ﬁelds of biotech-nologies, optoelectronics, and materials. A strong structural diversity is observed among molecular materials, which has been enriched over the years with a growing responsiveness to stimuli. Boron dipyrromethene (BODIPY) dyes have long been the ﬂagship of emissive boron complexes due to their outstanding properties until a decade ago when analogues based on NˆO, NˆN, or NˆC π -conjugated chelates emerged. The ﬁnality of developing borate dyes was to compensate for BODIPYs’ lack of solid-state ﬂuorescence and small Stokes shifts while keeping their excellent optical properties in solution. Among them, the borate complexes based on a salicylaldimine ligand, called by the acronym boranils appear as the most promising, owing to their facile synthesis and dual-state emission properties. Boranil dyes have proven to be good alternatives to BODIPY dyes and have been applied in applications such as bioimaging, bioconjugation, and detection of biosubstrates. Meanwhile, ab initio calculations have rationalized experimental results and provided insightful feedback for future designs. This review article aims at providing a concise yet representative overview of the chemistry around the boranil core with the subsequent applications. dyes, including boron complexes such as boranils (Figure 5) [50,51]. These dyes exhibit AIE/AIEE effect in THF/water or CH 3 CN/water mixtures when the water fraction reached 75 to 80%, a classical feature in AIE/AIEE luminescence. Another interesting feature is that these probes showed membrane permeability which shows great potential for application in cellulo. Chiral boranils complexes have also been shown to display AIEE effect leading to a bright emission in the solid-state [52].


Introduction
The current research aiming to engineer new fluorescent dyes is highly dynamic and primarily arises from fruitful collaborations between chemists, physicists, and biologists, continuously fueled by the applications of molecular probes in many fields, e.g., biomedical imaging, analysis, sensing, detection, materials science, etc. In particular, scientific innovation has led to major developments in the field of organic electronics including organic light-emitting diodes (OLED), photovoltaic cells, solar energy concentrators, or transistors [1][2][3]. In parallel, fluorescent emitters have contributed to the advancement of biotechnologies, mainly in biosensing and bioimaging [4][5][6]. Meanwhile, intense fundamental research has taken place aimed at designing original molecular structures with exceptional chemical, photochemical, and thermal stabilities, allowing prolonged exposure to harsh conditions of light and heat. Numerous families of dyes have been engineered with that purpose in mind, including polycyclic aromatic hydrocarbon (PAHs) [7], such as pyrene, tetracene, pentacene, perylene, porphyrins [8,9], coumarins [10], xanthenes [11] such as rhodamines or fluorescein, cyanines [12], squaraines [13], and peryleneimides [14]. One of the most popular families of organic dyes in recent decades is undoubtedly constituted of 4,4 -difluoro-4-bora-3a,4a-diaza-s-indacene derivatives, also known as BODIPY dyes [15][16][17][18]. Synthetic efforts notably allowed fine-tuning of the emission color, up to the near infra-red (NIR) and replacement of the fluoro ligands on boron by functionalized alkynes [19]. BODIPY dyes display outstanding photophysical properties, such as narrow absorption and emission bands, high molar absorption coefficients, and fluorescence quantum yields frequently reaching unity in solution. They also show remarkable chemical and photochemical stability. Nonetheless, they typically display weak emission intensity in the solid-state, as amorphous powders or crystals or even being doped in rigid matrixes owing to a flat scaffold, leading to tight packing and strong intermolecular interactions in the solid-state. [13] One strategy used to circumvent this drawback is to introduce sterically hindered substituents at the periphery of the BODIPY core to alleviate molecular aggregation [13]. This flat, rigid core is also at the origin of a strong overlap between absorption and emission band, i.e., very small Stokes shifts, leading to auto reabsorption phenomena and artificial decrease of luminescence intensity. In contrast, strong solid-state fluorescence can be observed in the case of dyes displaying excited-state intramolecular proton transfer (ESIPT) processes, where a tautomeric equilibrium leads to a major reorganization of the molecular scaffold in the excited-state and a subsequent increase of Stokes shifts [20,21].
The search for novel fluorescent scaffolds remains a challenging target in order to enrich the field of heterocyclic chemistry with expedite syntheses and easily functionalizable scaffolds. Among these derivatives, many are based on the use of a central four-coordinate boron (III) atom with the view to conveniently lock NˆN and NˆO ligands, flatten the structures, and increase conjugation and molecular rigidity [22]. The ligands are typically charged through deprotonation of phenol-or pyrrole-based structures, and two additional anions (F or Aryl) on the boron center ensure global neutrality of the resulting dyes. Over the years, many B (III) complexes have been engineered, highly inspired by the fantastic luminescent properties of BODIPY dyes in solution [23,24]. The ultimate goals behind these chemical engineering studies are to (i) expedite and upscale multi-step syntheses, (ii) decrease spectral overlap between absorption and emission, and (iii) increase solid-state emission intensity while retaining the outstanding optical characteristics of BODIPY dyes in solution. Among these dyes, borate complexes based on an aniline-imine or salicylaldimine ligand, also known as boranils, have rapidly emerged as the most interesting examples owing to their facile multi-gram scale synthesis and the fine-tuning of their emission properties ( Figure 1).
Organics 2021, 2, FOR PEER REVIEW 2 to the near infra-red (NIR) and replacement of the fluoro ligands on boron by functionalized alkynes [19]. BODIPY dyes display outstanding photophysical properties, such as narrow absorption and emission bands, high molar absorption coefficients, and fluorescence quantum yields frequently reaching unity in solution. They also show remarkable chemical and photochemical stability. Nonetheless, they typically display weak emission intensity in the solid-state, as amorphous powders or crystals or even being doped in rigid matrixes owing to a flat scaffold, leading to tight packing and strong intermolecular interactions in the solid-state. [13] One strategy used to circumvent this drawback is to introduce sterically hindered substituents at the periphery of the BODIPY core to alleviate molecular aggregation [13]. This flat, rigid core is also at the origin of a strong overlap between absorption and emission band, i.e., very small Stokes shifts, leading to auto reabsorption phenomena and artificial decrease of luminescence intensity. In contrast, strong solid-state fluorescence can be observed in the case of dyes displaying excited-state intramolecular proton transfer (ESIPT) processes, where a tautomeric equilibrium leads to a major reorganization of the molecular scaffold in the excited-state and a subsequent increase of Stokes shifts [20,21]. The search for novel fluorescent scaffolds remains a challenging target in order to enrich the field of heterocyclic chemistry with expedite syntheses and easily functionalizable scaffolds. Among these derivatives, many are based on the use of a central four-coordinate boron (III) atom with the view to conveniently lock N^N and N^O ligands, flatten the structures, and increase conjugation and molecular rigidity [22]. The ligands are typically charged through deprotonation of phenol-or pyrrole-based structures, and two additional anions (F or Aryl) on the boron center ensure global neutrality of the resulting dyes. Over the years, many B (III) complexes have been engineered, highly inspired by the fantastic luminescent properties of BODIPY dyes in solution [23,24]. The ultimate goals behind these chemical engineering studies are to (i) expedite and upscale multi-step syntheses, (ii) decrease spectral overlap between absorption and emission, and (iii) increase solid-state emission intensity while retaining the outstanding optical characteristics of BODIPY dyes in solution. Among these dyes, borate complexes based on an aniline-imine or salicylaldimine ligand, also known as boranils, have rapidly emerged as the most interesting examples owing to their facile multi-gram scale synthesis and the fine-tuning of their emission properties ( Figure 1).

Figure 1. Structures of BODIPY and boranil dyes.
This mini-review is focused on providing a short but extensive overview of the chemistry of boranils developed up to now, through the description of reported examples. The post-functionalization, optical properties in solution and in the solid state will be discussed along with potential applications and theoretical aspects. Other recent elegant examples describe fluorescent boron complexes called boranyls, including amide-based difluoroboranyls [23,24], but these dyes do not fall within the scope of this mini-review.

Synthesis, Derivatizations, and Applications
Typical synthesis of boranils complexes takes place in two steps from commercially available starting materials, i.e., substituted anilines and salicylaldehydes ( Figure 2). This mini-review is focused on providing a short but extensive overview of the chemistry of boranils developed up to now, through the description of reported examples. The post-functionalization, optical properties in solution and in the solid state will be discussed along with potential applications and theoretical aspects. Other recent elegant examples describe fluorescent boron complexes called boranyls, including amide-based difluoroboranyls [23,24], but these dyes do not fall within the scope of this mini-review.

Synthesis, Derivatizations, and Applications
Typical synthesis of boranils complexes takes place in two steps from commercially available starting materials, i.e., substituted anilines and salicylaldehydes ( Figure 2). Preparation of the anil derivatives is highly straightforward and can be easily achieved by refluxing reactants in ethanol with the possibility to add trace amounts of p-TsOH. During the course of the reaction the target imines typically precipitate pure out of the crude reaction mixture within one to three hours. Subsequent trivalent boron complexation using excess of BF 3 is performed. Et 2 O under basic conditions (DIEA or NEt 3 ) leads to pure boranils after purification on silica chromatography. The completion of the reaction can be readily monitored by 1 H NMR spectroscopy, the loss of the downfield signal between 12 and 15 ppm due to the H-bonded phenolic proton being distinctive. It is worth mentioning that in boranils complexes, a typical coupling of the imine proton to the 11 B center is observed, leading to the appearance of a broad quartet [25][26][27][28][29][30]. Additionally, enhanced Stokes shifts, ∆ SS are usually observed (∆ SS up to 9000 cm −1 ), as compared to BODIPY dyes which contribute to lower detrimental reabsorption processes [25][26][27][28][29][30].
Organics 2021, 2, FOR PEER REVIEW 3 Preparation of the anil derivatives is highly straightforward and can be easily achieved by refluxing reactants in ethanol with the possibility to add trace amounts of p-TsOH. During the course of the reaction the target imines typically precipitate pure out of the crude reaction mixture within one to three hours. Subsequent trivalent boron complexation using excess of BF3 is performed. Et2O under basic conditions (DIEA or NEt3) leads to pure boranils after purification on silica chromatography. The completion of the reaction can be readily monitored by 1 H NMR spectroscopy, the loss of the downfield signal between 12 and 15 ppm due to the H-bonded phenolic proton being distinctive. It is worth mentioning that in boranils complexes, a typical coupling of the imine proton to the 11 B center is observed, leading to the appearance of a broad quartet [25][26][27][28][29][30]. Additionally, enhanced Stokes shifts, ΔSS are usually observed (ΔSS up to 9000 cm −1 ), as compared to BODIPY dyes which contribute to lower detrimental reabsorption processes [25][26][27][28][29][30].  As shown in Figure 2, a wide panel of boranils structures has been reported over the years, with a strong emphasis on fine-tuning the emission color over the whole visible range, while maintaining a strong emission intensity both in solution and in the solidstate [31][32][33][34][35][36][37]. Of particular similarity between the major of fluorescent derivatives reported so far is the presence of a dialkylamino moiety on the phenolic side of the dyes, as a way to further stabilize the corresponding boron complexes in solution. Simple boranils dyes with diethylamino moiety display UV-centered fluorescence emission (λ em = 445 nm) with a weak quantum yield (QY) of 0.05 [31]. This feature was ascribed to a twisted intramolecular charge transfer (TICT), among other molecular motions occurring in the excited-state leading to a heavy quenching fluorescent emission [38]. One strategy applied to enhance these parameters is to introduce rigid electrodonating groups on the phenolic side such as julolidine [39] or 1,2,3,4-tetrahydroquinoxaline [32]. The latter strategy appeared to be particularly fruitful, as strong red emission (λ em = 656 nm, QY = 0.24) was recorded in this case. Another synthetic strategy commonly employed to redshift emission is to induce a long-range intramolecular charge transfer (ICT) emission by increasing the π-conjugated spacer between donor and acceptor. Notably, an extended 2-(6 -hydroxy-5 -benzofuryl) scaffold triggered redshifted fluorescence emission with a pronounced fluorosolvatochromism character, a feature typical of ICT processes [34]. A second example displayed a π-extended core involving a styryl spacer [33]. This boranil complex showed unprecedented fluorosolvatochromic behavior with a maximum emission wavelength spanning the entire visible range up to the near-infrared (NIR). The facile synthetic protocol employed for the preparation of boranils dyes can be straightforwardly extended to the formation of di-and trinuclear B (III) complexes [31,[35][36][37]. In particular, a simple dinuclear boranil complex with a central phenyl linker stiffened the structured, as evidenced by a QY of 0.90 [31]. More sophisticated examples involve a central naphthalene backbone leading to important bathochromic shifts in emission, up to 683 nm [35]. An extensive series of dyes based on this scaffold allowed a fine-tuning of the photophysical properties, as compared to simply substituted boranils dyes, with strong QY values, up to 83%. It is worth noting that the vast majority of boranil dyes display sizeable emission in the solid-state [36].
Fluorescent dyes containing several B (III) centers are reported to be advantageous over isolated dyes owing to an enhancement of the luminescence intensity and increase of molar absorption coefficients [40][41][42]. Additionally, functionalization of multiple boron fragments by sterically hindered substituents can prevent detrimental aggregates in the solid-state. With a variation on the number of boranil units and the position of functionalization, several polyboranils derivatives were developed allowing for the fine modulation of the photophysical properties. Functionalization at the boron center was also achieved by the introduction of B (Ar) 3 in lieu of archetypical BF 3 , usually present in boranil structures [25][26][27][28][29][30]. The presence of arenes contributes not only to the tuning the emission color but also to the improvement of the chemical stability. A marked decrease of ICT processes is also observed, as compared to their fluoride analogs [43,44].
The chemical stability of these appealing boranil dyes was further evidenced by the possibility of postfunctionalization of the molecular core, as exemplified in Figure 3 [45]. Notably, hydrogenation reaction allowed selective reduction of the nitro group without reducing the imino fragment. Amino-functionalized boranil synthon was subsequently further utilized in a range of derivatization reactions, including the preparation of boranil dyes with thiocyanate functional group. This thiocyanate-functionalized dye can be used to label lysine residues of Bovine Serum Albumine (BSA) protein, resulting in thiourea linked dye-protein assembly.  Upon grafting into the protein, a strong luminescence enhancement is observe which the authors attribute to the likely folding of the protein around the dye and th likely location of the boranils complex in hydrophobic pockets.
Red/NIR-emitting fluorescent dyes can also be beneficially used as imaging probe for tissues, cells, or even specifically target given cellular organelles such as mitochon dria, lysosomes, or nuclei [13]. Their low-energy fluorescence emission in the so-calle therapeutic window is a major asset to enhance imaging resolution owing to a stronge tissue transparency [13]. A NIR-emitting boranil dye with a strong fluorosolvatochromi emission profile has been embedded in Cremophor EL, an amphiphilic co-polyme which allows a good solubility in PBS buffer and a fast and convenient intracellular di fusion in HeLa cells. The cellular uptake and distribution was monitored using fluores cence lifetime imaging microscopy (FLIM) and real-time widefield imaging. It was foun that the emission of the dye is strongly influenced by the local environment and that th dye is preferentially internalized in acidic vesicles ( Figure 4) [33].  Upon grafting into the protein, a strong luminescence enhancement is observed which the authors attribute to the likely folding of the protein around the dye and the likely location of the boranils complex in hydrophobic pockets.
Red/NIR-emitting fluorescent dyes can also be beneficially used as imaging probes for tissues, cells, or even specifically target given cellular organelles such as mitochondria, lysosomes, or nuclei [13]. Their low-energy fluorescence emission in the so-called therapeutic window is a major asset to enhance imaging resolution owing to a stronger tissue transparency [13]. A NIR-emitting boranil dye with a strong fluorosolvatochromic emission profile has been embedded in Cremophor EL, an amphiphilic co-polymer which allows a good solubility in PBS buffer and a fast and convenient intracellular diffusion in HeLa cells. The cellular uptake and distribution was monitored using fluorescence lifetime imaging microscopy (FLIM) and real-time widefield imaging. It was found that the emission of the dye is strongly influenced by the local environment and that the dye is preferentially internalized in acidic vesicles ( Figure 4) [33]. Upon grafting into the protein, a strong luminescence enhancement is observed which the authors attribute to the likely folding of the protein around the dye and the likely location of the boranils complex in hydrophobic pockets.
Red/NIR-emitting fluorescent dyes can also be beneficially used as imaging probes for tissues, cells, or even specifically target given cellular organelles such as mitochondria, lysosomes, or nuclei [13]. Their low-energy fluorescence emission in the so-called therapeutic window is a major asset to enhance imaging resolution owing to a stronger tissue transparency [13]. A NIR-emitting boranil dye with a strong fluorosolvatochromic emission profile has been embedded in Cremophor EL, an amphiphilic co-polymer which allows a good solubility in PBS buffer and a fast and convenient intracellular diffusion in HeLa cells. The cellular uptake and distribution was monitored using fluorescence lifetime imaging microscopy (FLIM) and real-time widefield imaging. It was found that the emission of the dye is strongly influenced by the local environment and that the dye is preferentially internalized in acidic vesicles ( Figure 4) [33].  Another example involves the incorporation of phenyl rings on the boranil scaffold to act as intramolecular rotors in order to trigger aggregation-induced emission (AIE). AIE or Aggregation-Induced Enhanced Emission (AIEE), stemming from propeller-shaped fluorophores, fully (AIE) or partially (AIEE) quenched in fluid solution but highly emissive at high concentrations in aggregates; these have fueled extensive research in the last decade. This interesting phenomenon allowed overcoming aggregation-caused quenching effect (ACQ), at the origin of the extinction of fluorescence in the solid-state. A strong yellow emission was observed in the aggregated-state, as a consequence of the restrictions of intramolecular rotations. Moreover, this dye shows good biocompatibility and suitable lipophilicity to selectively stain lipid droplets in living cells in fast and wash-free manner, as well as yolk lipids in zebra fish [46].
Other examples of the utilization of the boranil scaffold in biology-related applications include red-emitting phenothiazine-substituted boranils for the selective detection of thiophenol in water samples, in serum, on paper filter strips, and in living cells [47]. In addition, a ratiometric fluorescent probe modulated by ICT and photoinduced electron transfer (PeT) processes was developed for the selective detection and imaging of cysteine, with an excellent selectivity between cysteine, homocysteine, and glutathione due to a very specific conjugate addition-cyclisation reaction [48]. Finally, iodo-functionalized mononuclear or dinuclear boranils complexes showed photosensitized generation of singlet oxygen, due to the stabilization of the triplet state owing to the heavy atom effects. Incorporation of these dyes in polymer films allowed the photosensitized depollution of organic water pollutants [49].
Tetraphenylethylene moieties have been by far the most studied AIE-inducing moiety and they have been grafted onto the scaffold of many fluorescent dyes, including boron complexes such as boranils ( Figure 5) [50,51]. These dyes exhibit AIE/AIEE effect in THF/water or CH 3 CN/water mixtures when the water fraction reached 75 to 80%, a classical feature in AIE/AIEE luminescence. Another interesting feature is that these probes showed membrane permeability which shows great potential for application in cellulo. Chiral boranils complexes have also been shown to display AIEE effect leading to a bright emission in the solid-state [52].
Another example involves the incorporation of phenyl rings on the boranil scaffold to act as intramolecular rotors in order to trigger aggregation-induced emission (AIE). AIE or Aggregation-Induced Enhanced Emission (AIEE), stemming from propeller-shaped fluorophores, fully (AIE) or partially (AIEE) quenched in fluid solution but highly emissive at high concentrations in aggregates; these have fueled extensive research in the last decade. This interesting phenomenon allowed overcoming aggregation-caused quenching effect (ACQ), at the origin of the extinction of fluorescence in the solid-state. A strong yellow emission was observed in the aggregated-state, as a consequence of the restrictions of intramolecular rotations. Moreover, this dye shows good biocompatibility and suitable lipophilicity to selectively stain lipid droplets in living cells in fast and wash-free manner, as well as yolk lipids in zebra fish [46].
Other examples of the utilization of the boranil scaffold in biology-related applications include red-emitting phenothiazine-substituted boranils for the selective detection of thiophenol in water samples, in serum, on paper filter strips, and in living cells [47]. In addition, a ratiometric fluorescent probe modulated by ICT and photoinduced electron transfer (PeT) processes was developed for the selective detection and imaging of cysteine, with an excellent selectivity between cysteine, homocysteine, and glutathione due to a very specific conjugate addition-cyclisation reaction [48]. Finally, iodo-functionalized mononuclear or dinuclear boranils complexes showed photosensitized generation of singlet oxygen, due to the stabilization of the triplet state owing to the heavy atom effects. Incorporation of these dyes in polymer films allowed the photosensitized depollution of organic water pollutants [49].
Tetraphenylethylene moieties have been by far the most studied AIE-inducing moiety and they have been grafted onto the scaffold of many fluorescent dyes, including boron complexes such as boranils ( Figure 5) [50,51]. These dyes exhibit AIE/AIEE effect in THF/water or CH3CN/water mixtures when the water fraction reached 75 to 80%, a classical feature in AIE/AIEE luminescence. Another interesting feature is that these probes showed membrane permeability which shows great potential for application in cellulo. Chiral boranils complexes have also been shown to display AIEE effect leading to a bright emission in the solid-state [52].  [50,51]. Adapted from Reference [50]. Copyright 2019 Elsevier. Adapted from Reference [51]. Copyright 2018 Elsevier.
Incorporation of Lewis acidic boron mesityl units onto the boranil core led to the development of mechanofluorochromic dyes whose maximum absorption and emission wavelengths can be modified depending on the spacer and the position of functionalization. These compounds exhibit fluorescence variations in response to external stimuli such as mechanical grinding (Figure 6, left) [53]. Lu et al. described a boranil dimer directly linked through central nitrogen atoms with peripheral tert-butyl groups which could form organogels in n-hexane. Introduction of a central phenyl ring did not form gels due to strong π-π interactions but the corresponding boranil complexes exhibited  [50,51]. Adapted from Reference [50]. Copyright 2019 Elsevier. Adapted from Reference [51]. Copyright 2018 Elsevier.
Incorporation of Lewis acidic boron mesityl units onto the boranil core led to the development of mechanofluorochromic dyes whose maximum absorption and emission wavelengths can be modified depending on the spacer and the position of functionalization. These compounds exhibit fluorescence variations in response to external stimuli such as mechanical grinding (Figure 6, left) [53]. Lu et al. described a boranil dimer directly linked through central nitrogen atoms with peripheral tert-butyl groups which could form organogels in n-hexane. Introduction of a central phenyl ring did not form gels due to strong π-π interactions but the corresponding boranil complexes exhibited piezofluorochromic behaviors (Figure 6, right) [54]. Blue-green emitting crystals could be ground into yellow emitting amorphous powders and the initial emission can be recovered upon heating. Other mechanofluorochromic examples of boranils include triphenylamine functionalized dyes [55] and units comprised of thiophene and α-cyanostilbene [56].
Organics 2021, 2, FOR PEER REVIEW 7 piezofluorochromic behaviors (Figure 6, right) [54]. Blue-green emitting crystals could be ground into yellow emitting amorphous powders and the initial emission can be recov ered upon heating.
A very recent example by the group of Crassous details the preparation of mono and di-boranil substituted helicenes, whose enantiomers could be separated using chira HPLC. Both complexes display circularly polarized fluorescence in solution and in PMMA films (Figure 7) [57]. Other reported applications of boranils dyes include their use as metal-free phos phorescence emitters [58,59]. In particular, phosphorescent organic solid-state laser from a nanowire microcavity of a sulfide-substituted boranil dye enables the observation o triplet emission at 650 nm under pulsed excitation [59].
There has also been several theoretical works devoted to boranils [60][61][62][63]. The mos complete methodological study we are aware of, ref [60] demonstrated that the excited states of boranil dyes show various admixtures of cyanine/ICT character depending on the substitution patterns, making them especially challenging for Time-Dependent Den sity Functional Theory (TD-DFT). In more details, the benchmark performed in that work indicates that: (i) a global hybrid functional, with a large share of exact exchange, e.g. Figure 6. Examples of boranils complexes exhibiting mechanofluorochromic fluorescence emission [53]. Adapted from Reference [53]. Copyright 2020 John Wiley and Sons.
A very recent example by the group of Crassous details the preparation of mono-and di-boranil substituted helicenes, whose enantiomers could be separated using chiral HPLC. Both complexes display circularly polarized fluorescence in solution and in PMMA films (Figure 7) [57].
Organics 2021, 2, FOR PEER REVIEW 7 piezofluorochromic behaviors (Figure 6, right) [54]. Blue-green emitting crystals could be ground into yellow emitting amorphous powders and the initial emission can be recovered upon heating.
A very recent example by the group of Crassous details the preparation of monoand di-boranil substituted helicenes, whose enantiomers could be separated using chiral HPLC. Both complexes display circularly polarized fluorescence in solution and in PMMA films (Figure 7) [57].  [57]. Adapted from Reference [57]. Copyright 2021 John Wiley and Sons.
Other reported applications of boranils dyes include their use as metal-free phosphorescence emitters [58,59]. In particular, phosphorescent organic solid-state laser from a nanowire microcavity of a sulfide-substituted boranil dye enables the observation of triplet emission at 650 nm under pulsed excitation [59].
There has also been several theoretical works devoted to boranils [60][61][62][63]. The most complete methodological study we are aware of, ref [60] demonstrated that the excited states of boranil dyes show various admixtures of cyanine/ICT character depending on the substitution patterns, making them especially challenging for Time-Dependent Density Functional Theory (TD-DFT). In more details, the benchmark performed in that work indicates that: (i) a global hybrid functional, with a large share of exact exchange, e.g., M06-2X, CAM-B3LYP, or B97X-D, is needed to reach accurate simulations of the ab-  [57]. Adapted from Reference [57]. Copyright 2021 John Wiley and Sons.
Other reported applications of boranils dyes include their use as metal-free phosphorescence emitters [58,59]. In particular, phosphorescent organic solid-state laser from a nanowire microcavity of a sulfide-substituted boranil dye enables the observation of triplet emission at 650 nm under pulsed excitation [59].
There has also been several theoretical works devoted to boranils [60][61][62][63]. The most complete methodological study we are aware of, ref [60] demonstrated that the excited states of boranil dyes show various admixtures of cyanine/ICT character depending on the substitution patterns, making them especially challenging for Time-Dependent Density Functional Theory (TD-DFT). In more details, the benchmark performed in that work indicates that: (i) a global hybrid functional, with a large share of exact exchange, e.g., M06-2X, CAM-B3LYP, or B97X-D, is needed to reach accurate simulations of the absorption and fluorescence signatures of boranil dyes; (ii) the selected theoretical solvation model strongly impacts the quality of the simulations. For a typical push-pull boranil, theory allowed to quantify the ICT nature, with a very large increase of the dipole moment upon excitation, as well as a clear ICT from one end of the molecule to another (Figure 8). Likewise, for two dyads, TD-DFT calculations could rationalize why BODIPY-boranil and bis-boranil dyes behaved very differently [60].
Organics 2021, 2, FOR PEER REVIEW 8 sorption and fluorescence signatures of boranil dyes; (ii) the selected theoretical solvation model strongly impacts the quality of the simulations. For a typical push-pull boranil, theory allowed to quantify the ICT nature, with a very large increase of the dipole moment upon excitation, as well as a clear ICT from one end of the molecule to another (Figure 8). Likewise, for two dyads, TD-DFT calculations could rationalize why BOD-IPY-boranil and bis-boranil dyes behaved very differently [60]. In 2018, a rather similar computational protocol was used to model the vibrationally-resolved absorption and emission spectra of a more complex boranil derivative synthesized previously [24] (Figure 9) [61]. Besides reproducing the experimental trends, this simulation allowed one to pinpoint the vibrational modes responsible for the shoulder appearing in the experimental fluorescence and phosphorescence spectra. [61] One can also find other theoretical studies discussing infrared and NMR signatures of boranils [62,63]. . Computed vibronic spectra of the displayed boranil. The green, red, and blue curves represent the absorption, fluorescence, and phosphorescence spectra simulated in the basis of the individual vibronic peaks (sticks). The inset is the experimental measurement taken from Reference [39]. Adapted from Reference [61] with permission from the PCCP Owner Societies.

Conclusions
In conclusion, this small account summarizes recent advances concerning the design and chemical engineering around boron complexes newcomers called boranil and their reported applications. Compared to their BODIPY parents, these fluorescent dyes display attractive emission intensity in the solid-state, enhanced Stokes shift, and easier synthetic pathways. Currently, due to their intrinsic asymmetric molecular structures, many bo- On the EDD plot, the blue and red lobes respectively represent regions of decrease and increase of electron density upon excitation. Adapted from Reference [60]. Copyright 2013 American Chemical Society.
In 2018, a rather similar computational protocol was used to model the vibrationallyresolved absorption and emission spectra of a more complex boranil derivative synthesized previously [24] (Figure 9) [61]. Besides reproducing the experimental trends, this simulation allowed one to pinpoint the vibrational modes responsible for the shoulder appearing in the experimental fluorescence and phosphorescence spectra. [61] One can also find other theoretical studies discussing infrared and NMR signatures of boranils [62,63].
Organics 2021, 2, FOR PEER REVIEW 8 sorption and fluorescence signatures of boranil dyes; (ii) the selected theoretical solvation model strongly impacts the quality of the simulations. For a typical push-pull boranil, theory allowed to quantify the ICT nature, with a very large increase of the dipole moment upon excitation, as well as a clear ICT from one end of the molecule to another (Figure 8). Likewise, for two dyads, TD-DFT calculations could rationalize why BOD-IPY-boranil and bis-boranil dyes behaved very differently [60]. On the EDD plot, the blue and red lobes respectively represent regions of decrease and increase of electron density upon excitation. Adapted from Reference [60]. Copyright 2013 American Chemical Society.
In 2018, a rather similar computational protocol was used to model the vibrationally-resolved absorption and emission spectra of a more complex boranil derivative synthesized previously [24] (Figure 9) [61]. Besides reproducing the experimental trends, this simulation allowed one to pinpoint the vibrational modes responsible for the shoulder appearing in the experimental fluorescence and phosphorescence spectra. [61] One can also find other theoretical studies discussing infrared and NMR signatures of boranils [62,63]. . Computed vibronic spectra of the displayed boranil. The green, red, and blue curves represent the absorption, fluorescence, and phosphorescence spectra simulated in the basis of the individual vibronic peaks (sticks). The inset is the experimental measurement taken from Reference [39]. Adapted from Reference [61] with permission from the PCCP Owner Societies.

Conclusions
In conclusion, this small account summarizes recent advances concerning the design and chemical engineering around boron complexes newcomers called boranil and their reported applications. Compared to their BODIPY parents, these fluorescent dyes display attractive emission intensity in the solid-state, enhanced Stokes shift, and easier synthetic pathways. Currently, due to their intrinsic asymmetric molecular structures, many bo- Figure 9. Computed vibronic spectra of the displayed boranil. The green, red, and blue curves represent the absorption, fluorescence, and phosphorescence spectra simulated in the basis of the individual vibronic peaks (sticks). The inset is the experimental measurement taken from Reference [39]. Adapted from Reference [61] with permission from the PCCP Owner Societies.

Conclusions
In conclusion, this small account summarizes recent advances concerning the design and chemical engineering around boron complexes newcomers called boranil and their reported applications. Compared to their BODIPY parents, these fluorescent dyes display attractive emission intensity in the solid-state, enhanced Stokes shift, and easier synthetic pathways. Currently, due to their intrinsic asymmetric molecular structures, many boranil dyes display ICT-driven emission, highly dependent to solvatation which tend to be quenched in polar protic environment. Further studies currently aim at improving their stability and fluorescence intensity in solution and diversify the range of applications.
Shifting the emission wavelength of the boranil core towards the NIR region while keeping strong emission intensity remains a challenge which needs to be tackled to envision applications in biotechnology. Moreover, some boranil dyes show interesting AIE properties which represent an attractive approach for the engineering of high luminous organic nanoparticles and solid emitters. Future perspective also includes the development of white-light-emitting materials, based on boranils.