Recent Advances in Applied Electrochemistry: A Review

: Applied electrochemistry (AE) plays today an important role in a wide range of fields, including energy conversion and storage, processes, environment, (bio)analytical chemistry


Introduction
Applied electrochemistry (AE) is a leading modern science that addresses societal challenges across diverse fields, including energy conversion and storage, processes, environment, (bio)analytical chemistry, and many others [1][2][3].In the energy sector, electrochemical processes are used for energy conversion and storage.This enables the development of productive and sustainable technologies, such as batteries [4,5], fuel cells [6,7], and electrolyzes [8,9].Therefore, these advancements help in the integration of renewable energy sources and support the transition towards green and more sustainable energy sources.
In the environmental field, electrochemistry provides novel solutions for pollution control and water treatment.Electrochemical processes, such as direct and indirect electrochemical oxidation processes and advanced oxidation processes, are used for the degradation of organic pollutants [10], removal of heavy metals [11][12][13], and enhancement of effluents' biodegradability [14,15].These technologies offer efficient and cost-effective approaches to address environmental challenges, protect ecosystems, and improve water quality.
In the manufacturing sector, electrochemistry plays a vital role in electrosynthesis, materials manufacturing, and surface modification.Electrochemical techniques, such as electroplating [16], electroforming [17], and electrochemical machining [18], are used to produce functional and protective coatings and enhance the performances of materials and components.These processes allow for the production of high-quality products with improved material properties and high durability.For example, the electrochemical treatments of material surfaces in metallurgical industries aim, first, to create porous materials that have a higher geometric surface area and, second, to enable the creation of a thick layer of metal oxide that protects and stabilizes the nanostructure of the metal or the semiconductor [19,20].
improved material properties and high durability.For example, the electrochemical treatments of material surfaces in metallurgical industries aim, first, to create porous materials that have a higher geometric surface area and, second, to enable the creation of a thick layer of metal oxide that protects and stabilizes the nanostructure of the metal or the semiconductor [19,20].
On the other hand, the European Union (EU) has set goals regarding the neutrality of the climate [37] and adopted in April 2021 the European climate law [38].This is central to making the EU's economy sustainable and reducing its environmental footprint [39,40].This aims to address many changes and incorporate a wide range of initiatives that aim at transforming key sectors, such as energy [41,42], industry [43,44], transport [45], and agriculture [46], to reach climate neutrality and push towards a more sustainable economy.In this context, electrochemistry emerges as a keystone for industry decarbonization and transitioning towards sustainable manufacturing processes, reducing carbon footprints [47,48].This includes the use of clean, renewable, and more sustainable energy sources instead of thermal energy sources via electrification powered by low-carbon electricity sources [49,50] and the use of fuel cells (for hydrogen production) [51,52].Carbon dioxide capture offers a pathway for industries to mitigate CO2 emissions and simultaneously produce value-added products (e.g., methane production) [53,54].
This review article summarizes the recent advances in applied electrochemistry.It shows how this field has become an indispensable tool for innovation, progress, and problem-solving in the modern world and addresses societal challenges across diverse fields (Figure 1).

Application Field 2.1. Energy Conversion and Storage
Energy surrounds us all the time, fueling our activities day and night.We often take for granted the convenience of accessing energy to power our gadgets, appliances, machines, and vehicles.However, it is crucial to think about how we store this energy for use [55].Unlike fossil fuels, which can be easily stored and transported in their natural state, renewable energy sources, such as sunlight and wind, require an intermediary storage method due to their intermittent nature.As a result, batteries are considered to be the only solution for storing this energy, so that it can be used when needed, providing a crucial bridge between energy generation and consumption [56,57].
There are two types of batteries, namely those storing energy for a single use, like nonrechargeable batteries, and those for multiple uses, exemplified by rechargeable batteries.Our focus is on batteries known for their ability to store and release energy repeatedly, leading to cost-effectiveness and eco-friendliness across various applications [58].The batteries' applications fall into three primary categories: transportation and automotive, including electric vehicles (EVs); portable electronics; and stationary power storage, with each type demanding unique specifications.Table 1 summarizes the different types of commercial batteries used for energy storage and their main applications, advantages, and disadvantages.
In fact, the progress of EVs heavily depends on the improvement of battery technology, which encounters various obstacles, such as underdeveloped batteries and challenges in practical applications [59].Lead acid batteries (Pb-A) have historically dominated the rechargeable battery market, particularly within the automotive sector, owing to their significant market share in terms of sales value and energy production.However, Pb-A batteries come with inherent limitations, including a relatively short cycle life, low energy density, susceptibility to acid stratification and leakage if damaged, and challenges in downsizing due to concerns related to lead production.Moreover, the environmental impacts associated with lead acid batteries are well-documented [60,61], necessitating extensive recycling efforts to mitigate their adverse effects.Consequently, lithium-ion batteries (LIBs) have emerged as a promising alternative, gaining traction due to their numerous advantages, including the high storage efficiency of close to 100% and offering a diverse range of chemistries, making them suitable for various sustainable applications [62].In the most common designs of LIBs, the cells consist of a negative electrode called an anode and a positive electrode called a cathode separated by an isolating separator and surrounded by an electrolyte.During discharge, lithium ions are transported from the anode, through the separator to the cathode and bound to the active material.Simultaneously, electrons are released and conducted via an external circuit from the anode to the cathode.When charging the LIB, the movements of lithium ions and electrons are reversed by a connected power supply [63].
In recent years, there has been a notable focus on advancing the development of cathodes to be more sustainable and safer.These efforts have resulted in the commercialization of different cathode materials in the EV market, including LiNi x Co y Al 1−x−y O 2 (NCA), LiMn 2 O 4 (LMO), LiNi 0.5 Mn 1.5 O 4 (LNMO) [64], LiFePO 4 (LFP), and LiNi x Mn y Co 1−x−y O 2 -(NMC)-based batteries.Each of these materials offers its own set of advantages over the others [65].NCA, LFP, and NMC-based batteries are prominently utilized in electric vehicles produced by companies like BMW, Chevrolet, Nissan, Tesla, etc. [66].While Li-air and Li-S batteries have been manufactured, they are not yet ready for car applications.However, sodium-ion batteries are emerging as a potential alternative to lithium-ion batteries.
On the other hand, personal devices, including smartphones, laptops, tablets, cameras, and wearable technology, heavily depend on energy storage to function effectively within compact designs.Batteries serve as the primary power source for these devices, requiring relatively small storage capacities in limited volumes and lightweight formats.Among the battery types, LIBs, especially those utilizing LMO and LiCoO 2 , stand out as particularly well-suited for small-scale electronics.They serve as the primary power cathode in a variety of devices, from smartphones and computers to power tools.Moreover, the utility of LIBs extends beyond powering portable electronics and transportation.They now play vital roles in supporting the electricity grid.This expansion enables the integration of variable renewable energy sources, ultimately improving efficiency in transmission and distribution systems [67].An alternative strategy on the verge of commercialization, in addition to cathode development, involves transitioning from graphite anodes to silicon anodes.Silicon, an abundant, non-toxic, and cost-effective material, offers significantly higher storage capacity.Initial attempts to create anodes solely from pure silicon were unsuccessful.However, a more promising approach, now further developed by the industry, involves incorporating porous or other carbon additives into the anode [75].Currently, various manufacturers, such as Varta, Sila Nanotechnologies, Enovix Corporation, Gotion High-Tech, and others, are actively working on composite anodes with varying, yet increasing, proportions of silicon and/or SiO x or TiSi [76].Substituting conventional electrodes like graphite or silicon with graphene can enhance battery stability and lifespan, while also providing higher energy density at a lower cost.However, the structural constraints of graphene limit battery size, thereby restricting the energy-storage capacity primarily to small devices, rendering them unsuitable for large battery packs, including those for EVs [77,78].
Current advancements in nanotechnology focus on the miniaturization of electronic devices to provide power on demand.The lithium ion-based micro/nano-batteries are excellent candidates for this purpose, which feature small size, light weight, high capacity, and long cycle life, and they also offer stability and safety, making them suitable for energy storage in microdevices and wearable applications [79].In addition to the development of metal-based batteries, organic batteries, also known as polymer-based batteries, feature several advantages over their common metal-based counterparts: they do not contain any toxic and rare heavy metals, their organic raw materials can potentially be obtained from renewable resources, and at the end of the life cycle, they can be disposed of by incineration without toxic leftovers.In the early 2000s, different potential applications were explored for these batteries, which are more environmentally friendly.Nevertheless, these systems have not found commercial applications until today, with Evonik Industries currently at the forefront in supplying materials for printable polymer-based batteries, which can be used in thin and flexible devices [69,80].Biobatteries based on biofuel cells are also emerging as a net-zero CO 2 emissions solution.While still in the development phase, these biobatteries provide clean, safe, durable, and efficient energy storage that aligns with future climate objectives.They use enzymes, organelles, or microorganisms as ecofriendly biocatalysts to convert chemical or biological energy into electrical energy, enabling sustainable power generation for portable, wearable, implantable, or ingestible devices, as well as offering long-term solutions for unattended environmental electronics [70,81].The BeFC (Bioenzymatic Fuel Cells) company has developed the first cost-effective and efficient paper biofuel cells.These cells are metal-free, organic, recyclable, compostable, safe, and sustainable.
With the expected rise in battery demand by 2050, Verkor, headquartered in France, has launched a battery gigafactory.Their objective is to manufacture low-carbon, highperformance electric batteries, primarily LIBs, to support sustainable mobility efforts.This initiative aims to reduce reliance on Chinese battery manufacturers and create more job opportunities.
Apart from employing batteries with zero net CO 2 emissions, battery recycling is crucial [58].As most battery materials are recyclable, investing in sustainable practices is essential to mitigate environmental impact and meet growing energy needs.Recognizing this necessity, the Swedish battery company NorthVolt and its subsidiary Revolt, which handles recycling, have been established.These facilities are dedicated to not only producing high-quality batteries but also implementing comprehensive recycling strategies.From the initial selection of components (batteries devoid of Li or Co) to the end-of-life recycling process, these companies play a pivotal role in minimizing resource depletion and reducing carbon emissions associated with battery production and disposal (Figure 2).handles recycling, have been established.These facilities are dedicated to not only producing high-quality batteries but also implementing comprehensive recycling strategies.From the initial selection of components (batteries devoid of Li or Co) to the end-of-life recycling process, these companies play a pivotal role in minimizing resource depletion and reducing carbon emissions associated with battery production and disposal (Figure 2).Illustration of the fabrication of batteries using raw materials, such as Pb, Li, and Co, and their tendency for shortage in the long term (left-hand side), followed by their end-of-life phase after usage and improper disposal, which poses hazards (right-hand side).In the center, the trend among recent and future companies is to recycle batteries and manufacture new ones in a sustainable manner, utilizing renewable resources, such as solar energy, wind power, bacteria, and enzymes.

Material Characterization
Electrochemical characterization points to a range of techniques within the field of electrochemistry that are used to analyze and understand the properties and behaviors of materials or systems.These techniques include applying electrical stimuli and measuring Figure 2. Illustration of the fabrication of batteries using raw materials, such as Pb, Li, and Co, and their tendency for shortage in the long term (left-hand side), followed by their end-of-life phase after usage and improper disposal, which poses hazards (right-hand side).In the center, the trend among recent and future companies is to recycle batteries and manufacture new ones in a sustainable manner, utilizing renewable resources, such as solar energy, wind power, bacteria, and enzymes.

Material Characterization
Electrochemical characterization points to a range of techniques within the field of electrochemistry that are used to analyze and understand the properties and behaviors of materials or systems.These techniques include applying electrical stimuli and measuring the resulting electrical or electrochemical signals to achieve insights into various properties, such as conductivity, surface reactivity [82], corrosion resistance [83], catalytic activity [84], and ion transport [85].Electrochemical characterization techniques are valuable tools for the analysis of both species in solution and solid states.
For species dissolved in a solution, common techniques, such as cyclic voltammetry, chronoamperometry, potentiometry, and impedance spectroscopy, are employed for the electrochemical characterization.However, for solid materials, cavity microelectrodes are typically used.To characterize the electroactive species, solids are inserted in the cavity of the microelectrode, and electrochemical characterization is performed.In this part, each technique is briefly described, and examples are given.
Cyclic voltammetry (CV) is a powerful and popular electrochemical method commonly used to explore the reduction and oxidation processes of molecular species.CV is also valuable for studying chemical reactions initiated by electron transfer, including catalysis, providing insights into catalytic processes, and facilitating the understanding of redox mechanisms in various systems [27].Cyclic voltammetry characterizes electrochemical systems by measuring the current response (i) as a function of applied voltage (E) (i vs. E), providing information on redox reactions, electron transfer kinetics, and stability of electroactive species [86].This technique involves linearly and cyclically sweeping the voltage while monitoring the resulting current response, allowing peak potentials, peak currents, and other electrochemical parameters to be determined [87].In CV, the Butler-Volmer equation (Equation ( 1)) is often used to model the kinetics of electron transfer at the electrode interface as follows: where i is the current density, i 0 is the exchange current density (in A/m 2 ), α is the charge transfer coefficient (dimensionless), n is the number of electrons involved in the electrode reaction, R and F are, respectively, the perfect gas and the Faraday constants, T is the temperature, and η is the overpotential, defined as the difference between the applied electrode potential and the equilibrium potential for the electrode reaction.
On the other hand, chronoamperometry is an electrochemical technique that measures the electric current (i) as a function of time (i vs. t) when a constant electric potential (E) is applied to an electrode.Unlike cyclic voltammetry, which involves applying a potential that varies cyclically, chronoamperometry maintains a constant potential and measures the resulting electric current over time according to Cottrell's law (Equation ( 2)).This technique is often used to study electrochemical reactions with specific electrode materials and to determine the kinetic constants of electrochemical reactions [88,89].
where i is the current, n is the number of electrons involved in the electrochemical reaction, F is Faraday's constant, A is the area of the electrode, D is the diffusion coefficient of the electroactive species, C is the concentration of the electroactive species, and t is time (in seconds).Steady-state amperometry using microelectrodes and based on potential step experiments is widely considered to offer superior accuracy for monitoring the state of charge (SOC) in redox flow battery (RFB) electrolytes.A novel analytical method for amperometric state-of-charge (SOC) and state-of-health (SOH) measurements in individual redox flow battery (RFB) electrolytes was developed, focusing on transient current signals obtained in chronoamperometric potential step experiments [90].
On the other hand, potentiometric measurement is a technique used to determine the concentration of ions in a solution by measuring the difference in electrical potential (∆E) between a reference electrode (typically Ag/AgCl) or a pseudo-reference electrode and a working electrode [91][92][93] as a function of time (∆E vs. t).This method is based on the Nernst equation (Equation ( 3)), which relates the measured potential to the concentration of ions in the solution.It is characterized by its simplicity and sensitivity; however, the presence of different ions in solution conducts to measure a mixed potential that is proportional to the ion's concentration.
where R and F are, respectively, the perfect gas and the Faraday constants, n is the number of electrons, T is the temperature, and E 0 is the standard potential of the target analyte.
In the battery field, the entropy coefficient (dUOC/dT) serves as a crucial parameter for predicting the heat generation in lithium-ion batteries (LiBs), particularly at low-rate conditions.Although the potentiometric method is commonly used for entropy coefficient measurement, its accuracy comes at the expense of time.Consequently, there is a critical need for an efficient and accurate entropy measurement technique.The proposed rapid and precise improved potentiometric method, known as positive adjustment (PA), reduces the relaxation time to 10 min.Commercial 18650 lithium-ion cells are used to validate the PA method.A comparison between the entropy profiles obtained by the PA method and conventional potentiometric method (CPM) indicates a comparable accuracy, with an average error of ±0.01 mV/K.Even when contrasted with recent alternative methods, the PA method demonstrates notable advantages in measurement efficiency [94].
Conversely, impedance (Z) measurement is a technique used to characterize the electrical behavior of a system in response to an alternating electrical signal (for a fixed frequency range) [95].Impedance is a measure of the resistance of an electrical circuit to alternating current (as per Ohm's Law) and can include components of resistance, capacitance, and inductance.There are several impedance measurement techniques, such as electrochemical impedance spectroscopy (EIS), which is widely used to study electrochemical processes in batteries [96,97], sensors [98,99], and other electrochemical systems (Figure 3).A timedomain measurement technique utilizing a preset equivalent circuit model, comprising numerous series-connected resistor and capacitor parallel elements, was explored as a means of measuring the electrochemical impedance spectrum of a lithium-ion battery, while excluding the apparent impedances resulting from open circuit voltage changes in the low-frequency range.Initially, an extensive experimental investigation was conducted to determine the optimal conditions for the applied signal suitable for this technique.It was established that an impedance spectrum ranging from several tens of microhertz to several tens of millihertz could be accurately measured by selecting a suitable, low-rate, and long-duration constant current charge or discharge as the applied signal.Subsequently, impedance spectra, excluding the apparent impedances resulting from open circuit voltage changes, were measured under various conditions using this technique.The fundamental characteristics of the impedances associated with the solid-state diffusion processes of lithium within the corresponding low-frequency range were examined.It was revealed that the impedance spectrum, excluding the apparent impedances resulting from open-circuit voltage changes in the low-frequency range (ranging from several tens of microhertz to several tens of millihertz), could be reasonably separated into two finite-length Warburg impedances.These impedances could be clearly characterized by differences in their diffusion time-constant values and the state-of-charge dependence of their diffusion resistances.Furthermore, an Arrhenius-type temperature dependence was confirmed for both of their diffusion resistances.A time-domain measurement technique using a preset equivalent circuit model (ECM) was examined for electrochemical impedance spectrum analysis in lithium-ion batteries (LIBs).Experimental studies determined optimal signal conditions, allowing accurate measurements in the low-frequency range.Impedance spectra, excluding apparent impedances from open circuit voltage changes, were analyzed, revealing distinct characteristics related to SOC and battery temperature.This technique enabled the separation of two finite-length Warburg impedances with clear diffusion time-constant values and SOC dependencies.Minimal variations were observed in the time constants of these impedances, showcasing their potential for accurate impedance analysis in LIBs and reducing the resistance for the use of electrochemical impedance spectroscopy analysis in materials chemistry.
Chemistry 2024, 6, FOR PEER REVIEW 9 variations were observed in the time constants of these impedances, showcasing their potential for accurate impedance analysis in LIBs and reducing the resistance for the use of electrochemical impedance spectroscopy analysis in materials chemistry.Cavity microelectrodes (CMEs) are used in various areas of scientific research [100], including electrophysiology, neuroscience, material [101,102] analytical chemistry, and even batteries [103].They are generally made of a conductive material, often metallic, with a small cavity at the end (tens of µm depth and larger).These microelectrodes are used to Cavity microelectrodes (CMEs) are used in various areas of scientific research [100], including electrophysiology, neuroscience, material [101,102] analytical chemistry, and even batteries [103].They are generally made of a conductive material, often metallic, with a small cavity at the end (tens of µm depth and larger).These microelectrodes are used to measure electrical signals on a very small scale.The cavity at the end of the electrode allows better electrical conduction between the electrode and the medium in which it is inserted.This feature improves the sensitivity of electrophysiological or electrochemical measurements.When it comes to batteries, cavity microelectrodes are used to study the electrochemical processes that occur inside the battery.They make it possible to precisely measure electric currents and electrochemical potentials at very fine scales, thus contributing to the understanding of the performance and durability of batteries.Cavity microelectrodes in the field of batteries are characterized by their small size, high energy density, rapid response, stability, and durability, as well as their ability to enable precise control of electrochemical processes.They offer the potential for new battery architectures that can lead to improved performance and better energy efficiency.Cavity microelectrodes (CMEs) provide a valuable platform for evaluating the electrocatalytic performance of micro-and nanoparticle materials.The technical factors and physicochemical processes affecting the electrochemical response of CMEs need to be recognized, particularly the accessibility of redox species on the surface of the electrocatalyst.The voltammetric response of cavity microelectrodes (CMEs) is explored using a combined experimental and theoretical approach.This includes a comparative examination of cyclic voltammetry and square-wave voltammetry (SWV) techniques.The results demonstrate a capacitive response distortion, increasing with the powder surface area, but with a Faradaic response analogous to that of embedded microdisks, indicating that electrochemical reactions occur primarily on the first layer of the powder filler.Furthermore, it is demonstrated that the SWV is well suited to discriminate Faradic processes at CMEs, and precise mathematical expressions are presented to describe it.These results provide guidelines for the design and analysis of the voltammetric measurements of CMEs [104].
In summary, while cyclic voltammetry, impedance spectroscopy, potentiometry, and chronoamperometry are all electrochemical techniques used in battery research, they each have distinct principles, applications, advantages, and limitations.The choice of technique depends on the specific aspects of the battery behavior being studied and the desired level of detail and complexity in the analysis.

Surface Modification
The surface modification by electrochemical methods takes various forms through different processes, such as electroplating, electrodeposition, anodization, surface etching, and electrochemical functionalization.This section briefly summarizes the concept of each of the above-cited processes and focuses on the main applications that are related to each method.
Electroplating and electrodeposition processes are sometimes used interchangeably.However, in technical contexts, they refer to different processes.Electroplating refers to the process of depositing a thin layer of metal onto a substrate surface using an electrochemical reaction [16,105].It is widely used in metallurgical industries, such as automotive, electronics, and jewelry manufacturing (e.g., nickel coatings, platinum coatings [106], gold coatings [107], copper coatings [108], etc.), with the objective of producing protective coatings to preserve surfaces from aggressive conditions, thereby increasing the performance of materials and enhancing the physical properties of components (brightness, shape, etc.).Conversely, electrodeposition refers to the process of depositing any material onto a substrate surface using electrochemical methods.Electrodeposition enables the production of high-quality products with improved material properties and high durability.It allows for performing the electrodeposition of alloys, composites, or non-metallic materials (e.g., deposition of glasses [109], silicone [110], and conductive polymers like polypyr-role [111], polyaniline [112,113], PEDOT [114], etc.).To summarize, electroplating is a type of electrodeposition focused on depositing metal coatings.
Nevertheless, the anodization process is commonly used to improve corrosion resistance, hardness, and adhesion of the substrate [115].This technique involves applying a positive potential to the substrate surface in an electrolyte solution, leading to the formation of a stable oxide layer [116,117].It is primarily used on aluminum and its alloys to enhance surface properties and provide various benefits (durability, enhanced aesthetics since anodizing has an impact on the surface color, electrical insulation required for some applications, and improved adhesion as anodizing creates a porous surface that enhances the adhesion of paints and other coatings) [118,119] (Figure 4).coatings to preserve surfaces from aggressive conditions, thereby increasing the performance of materials and enhancing the physical properties of components (brightness, shape, etc.).Conversely, electrodeposition refers to the process of depositing any material onto a substrate surface using electrochemical methods.Electrodeposition enables the production of high-quality products with improved material properties and high durability.It allows for performing the electrodeposition of alloys, composites, or non-metallic materials (e.g., deposition of glasses [109], silicone [110], and conductive polymers like polypyrrole [111], polyaniline [112,113], PEDOT [114], etc.).To summarize, electroplating is a type of electrodeposition focused on depositing metal coatings.
Nevertheless, the anodization process is commonly used to improve corrosion resistance, hardness, and adhesion of the substrate [115].This technique involves applying a positive potential to the substrate surface in an electrolyte solution, leading to the formation of a stable oxide layer [116,117].It is primarily used on aluminum and its alloys to enhance surface properties and provide various benefits (durability, enhanced aesthetics since anodizing has an impact on the surface color, electrical insulation required for some applications, and improved adhesion as anodizing creates a porous surface that enhances the adhesion of paints and other coatings) [118,119] (Figure 4).Electrochemical etching or wet etching (also known as electrochemical machining) is a process that uses an electrical current and an electrolyte solution to selectively remove materials from a conductive substrate (metal or semi-conductor) to perform etching [121,122].This can be used to create surface textures, patterns, or microstructures for various applications.It is somehow the reversible process of electrodeposition where a thin layer of metal is coated.The process consists, in most cases, of immersing the metal (or the semiconductor) in acid baths (electrolyte) during a specific time to create, first, porous nanostructures onto the substrate surfaces and, second, to enable the creation of a thin layer of metal oxide (by anodization) that protects and stabilizes the nanostructures [19,20].By this, the surface area increases as the structure of the substrate is converted from 2D surfaces to 3D surfaces [123].Conceptively, many parameters affect the process and should be controlled, e.g., the concentration of the acidic solutions, the temperature of the baths, the presence of a catalyst that has an essential role in the initiation of material nucleation (e.g., copper ions), and, finally, the thickness of the substrate.On the other hand, etching may affect the mechanical properties of the etched substrate.For this reason, many physical properties are monitored during the process by relying on routine testing of the substrate (e.g., Bursting strength tester for foil substrates, etc.).To obtain the best compromise between the surface etching while conserving good and acceptable physical properties, the contact time (residency time of the substrate in the electrolytes) should be considered [124,125].The surface etching can take various forms depending on the bath composition.Consequently, it can create tunnels crossing the material surfaces [126,127], and it can create nanopores (also named pore nucleation) on the substrate surfaces by increasing the surface area [128].
The widespread application of electrochemical etching is in the preparation of raw materials (anode and cathode components) used in the fabrication of electrochemical ca-pacitors, also known as supercapacitors [129].In this process, the aluminum foils (high purity ≥ 99%) are treated by electrochemical etching and then formed.Depending on the capacitance measurements, sheets may be classified and used for different applications, e.g., DC capacitor high voltage, AC capacitor motor start, etc.The higher capacitance values can indicate certain desirable properties, such as increased surface area or improved electrode performance [130].Therefore, they should be interpreted in conjunction with other characterization techniques and performance metrics to assess overall foil quality accurately.

Electroanalysis
Electrochemical analysis (or electroanalysis) relies on the use of electrochemical methods to quantitively determine the concentration of an analyte in a sample.Typically, these methods include voltammetry [27], amperometry [28], potentiometry [29], and impedance spectroscopy [131] (the principle of these methods is detailed in § 2.2).These methods are employed to measure antioxidant activity [21,22] and analyze [24], and characterize various compounds and materials [25,26], as well as to develop reference methods [132].Electrochemical sensors and biosensors are among the most common applications of electroanalysis.They are used for the detection of biomolecules [30,133], pollutants [31], and analytes in environmental samples [32,33], food [134], pharmaceuticals [34,35], and clinical and biochemical diagnostics [23,36,135].These devices offer rapid, sensitive, and relatively selective measurements, making them valuable tools for research, quality control, and real-time process monitoring (Figure 5).
In this section, two examples of electroanalysis are investigated based on their importance and widespread applications: the pH electrode and the glucose biosensor.In fact, pH monitoring is of high interest in many chemical and biochemical processes.The term pH stands for the potential of hydrogen and allows it to express its power.The pH measurements express the acidity and alkalinity of solutions and vapors and help in controlling and optimizing industrial processes.The measure of pH using a redox electrode probe consists of potentiometrically determining the concentration of hydrogen ions (H + ) in a solution based on the Nernst equation [136,137].Recently, many miniaturized pH electrodes have been reported in the literature.These devices are designed to be small and compact and are essentially important in many applications that require small-scale systems for integration (e.g., lab-on-a-chip systems [23,30], point-of-care diagnostics, etc.) or dedicated for portable devices (for physiological monitoring or wearable health trackers) [138,139].
A glucose biosensor is a device that incorporates a biological recognition element as a sensing component (enzymes, e.g., glucose oxidase (GOx) or glucose dehydrogenase (GDH) and its cofactor).The enzymatic reaction byproducts diffuse through the sensing membrane and are then oxidized or reduced on the electrode surface at a fixed potential that depends on the electrode material [140,141].Typically, in the case of first-generation enzymatic glucose biosensors, the enzymatic oxidation of glucose by GOx leads to the production of hydrogen peroxide (H 2 O 2 ), which is oxidized at a positive potential of +0.7 V vs. a Ag/AgCl reference electrode or reduced at negative potentials (between −0.2 and 0 V) using mediators that lower the detection potentials and prevent interference problems [142].Glucose biosensors are devices commonly used to monitor blood glucose levels in diabetic patients and represent one of the most widely used applications for glucose monitoring worldwide [143].
enzymatic glucose biosensors, the enzymatic oxidation of glucose by GOx leads to the production of hydrogen peroxide (H2O2), which is oxidized at a positive potential of +0.7 V vs. a Ag/AgCl reference electrode or reduced at negative potentials (between −0.2 and 0 V) using mediators that lower the detection potentials and prevent interference problems [142].Glucose biosensors are devices commonly used to monitor blood glucose levels in diabetic patients and represent one of the most widely used applications for glucose monitoring worldwide [143].

Electrochemical Processes for Depollution and Water Remediation
Providing clean water for industrial or drinking purposes is challenging because of the wide range of chemicals generated and used on a regular basis that eventually contaminate water streams [144].Huge pollutant fluxes from industrial and agricultural processes unintentionally affect the quality of water.In fact, it is well known that the world's largest polluters are the manufacturers of synthetic organic chemicals (>400 million tons annually), fertilizer use (∼200 million tons annually), and pesticide use (∼3 million tons annually) [145].Water-pollution management is still more important than ever, given the

Electrochemical Processes for Depollution and Water Remediation
Providing clean water for industrial or drinking purposes is challenging because of the wide range of chemicals generated and used on a regular basis that eventually contaminate water streams [144].Huge pollutant fluxes from industrial and agricultural processes unintentionally affect the quality of water.In fact, it is well known that the world's largest polluters are the manufacturers of synthetic organic chemicals (>400 million tons annually), fertilizer use (~200 million tons annually), and pesticide use (~3 million tons annually) [145].Water-pollution management is still more important than ever, given the fact that over 30% of Earth's usable freshwater is used for industrial processes, energy production, and agriculture.
Many ways to find more sustainable solutions for water-treatment applications are offered by electrochemical processes [146,147].In most cases, electricity is used as the main energy source that facilitates the electrochemical reactions that occur and conducts these processes.Among well-developed electrochemical water-treatment processes, such as electrocoagulation, electroflotation, electrodialysis, electrochemical oxidation, and reduction, there are emerging processes that show good prerequisites for their use in industrial-scale applications.These processes tend to increase the rate of pollution removal, eliminate disadvantages, and expand the applicability of existing electrochlorinated water-treatment techniques to improve cost effectiveness.The following emerging and combined electrochemical processes, such as electrodeionization [148], capacitive deionization [149], electro-Fenton [150], microbial fuel cell treatment [151], photo-and sonoelectrocatalyses, are showing impressive results in water depollution, especially at lab scale [152].However, the main concern in the use of these processes remains the scale-up to industrial scale which is a very challenging step to apply these processes.
Electrodeionization is a combination of two desalination processes, electrodialysis and ion exchange, that result in even deeper demineralization rates.Capacitive deionization allows for the simultaneous desalination of water and recovery of electrical energy, in an efficient manner.Electro-Fenton allows the generation of catalysts in situ, thereby reducing sludge formation.In addition to water treatment, microbial fuel cells allow electrical energy to be recovered, thus reducing the maintenance costs required for this process.The increased separation of charge carriers and the suppression of electron-hole recombination in an electrical field make photoelectrocatalysis provide better removal efficiencies than a single photocatalyst.Sonoelectrocatalysis increases the rate at which reactive substances are transferred, inhibits the polarization of electrodes, and plays an important role in hydroxyl radical production to improve treatment efficiency compared to single electrolyte oxidation.
An example of the oldest industry with complex processes and high chemical consumption is the textile sector.Due to the ever-increasing demand for clothing from the world's population and changes in the fashion industry, it continues to grow in variety and number [153].This may contribute to the economic benefit of the population, but the negative impact on the environment is often reported, in particular because of the discharge of wastewater [154].Due to the potential toxicity and risks to human health, textile wastewater is a concern and must be treated before being discharged into the water supply.
In the treatment of textile waste, conventional processes are most applied, such as integrating chemical, biological, or physical methods.Aluminum sulfate, ferrous sulfate, and PAC (polyaluminum chloride) are generally used as coagulants in textile wastewater treatment [155].These coagulants are easy to agglomerate with pollutants and form tiny particulate matter and flocculants in wastewater.Flocculants, in turn, improve the size and properties of the floc, particularly its stability [156].However, for dye wastewater, this process has a limited COD (chemical oxygen demand) removal rate of 10%, which may lead to sludge production.To improve treatment performance, activated sludge, moving bioreactors (MBR), and biofilters are usually used after coagulation-flocculation.However, the quality of the effluents often does not meet the required quality standards.Thus, it needs a finishing process (sedimentation).Physical processes, such as adsorption, are reported for their potential application as a finishing treatment.However, it has a relatively short life span (less sustainable) and may produce spent adsorbent as a byproduct.The integration of chemical, biological, and physical processes generally requires more space, longer retention time (1-4 days), higher operational cost, and needs a sludge handling and disposal system.As a stand-alone technology or combined with aerobic processes, biological processes are often used.An integrated system of anaerobic and aerobic processes has become an option because of the large quantities of sludge generated in chemical processes [153].The color-removal efficiency achieved in this process is, on the other hand, relatively small.In addition, high ammonium content, color, and non-degradable CODs are characteristics of printing textile wastewater.As a final step in removing persistent pollutants, including dyes, and improving the performance of biological wastewater-treatment plants, most textile industries use a decolorization agent (DCA) [157].DCA is a cationic organic polymer with a dicyandiamide formaldehyde resin base with high adsorption efficiency and settleability, the ability to neutralize the electric charge of the particle surface, more stable flocs, and the ability to remove dissolved dyes, such as direct, reactive, disperse, and acid dyes [158].However, DCA is often not the appropriate solution in every situation due to its high cost, low availability, and requirement for sludge disposal.The fact that sludge produced as a byproduct in this case may have significant environmental impacts and be of high risk to humans and the ecosystem is also worth noting.
Over the last decade, intensive research has been carried out on the removal of color in modern oxidation processes.It can be created by photocatalysts [159] ozonation, Fenton's reagent [160], and electrocatalytic processes [161].The obvious advantages of photocatalytic oxidation are the low temperature and pressure requirement and being biologically inert and soluble in water, which is widely available, highly photoactive, less toxic, and environmentally friendly.However, major limitations remain in terms of application potential as regards TiO 2 catalyst morphology and crystallinity, metal doping requirements, high selectivity to the specific character of pollutants, and close contact with light sources.
Electrocatalytic oxidation, commonly known as EAOP (electrochemical advanced oxidation process), uses electrical energy in pollutant degradation.These processes rely on the in situ formation of hydroxyl radicals (OH • ) known to non-selectively attack and oxidize the pollutants until the achievement of biodegradability or the total mineralization of the effluent.Its high performances in color and COD removals were reported in dyeing textile wastewater and printing textile wastewater [162].A new hybrid Fenton electrochemical system and reactor are proposed to be an effective post-treatment option for textile effluents and many others [10,163].In terms of color, COD, and ammonium removal, this process is highly effective.As they are cheaper than TiPtIr and more economically feasible than GDL (gas-diffusion layer) carbon [164], mesh TiRuO 2 and graphite carbon rods have been used as electrodes.
Applied in the industrial sector, a unique system with a cylindrical stainless-steel reactor with pairs of electrodes (mesh cylinder Ti/RuO 2 /anode and graphite carbon rod cathode) can be proposed to degrade the complex pollutants of real textile wastewater.The internal circulation system provides considerable advantages for the operation of this system, e.g., increased volume loads of up to 400%.This method can be a promising alternative for textile wastewater after treatment, as pollutants have been degrading simultaneously using electro-Fenton oxidation.In a short time, the removal of color, COD, and ammonium was significant.Due to the longer contact between the generated reactive species and the pollutants in the wastewater, the circulating system was more advantageous than the noncirculating system.The removal efficiency of pollutants, color, and COD, the oxidability index, and operational costs have confirmed and supported this technique.Electrical consumption was about 3 kwh/m 3 of Rp 4.200/m 3 for the non-circulated system, and it was reduced significantly to 1.1 kwh/m 3 or Rp1.540/m 3 for the circulated system.A high potential system can be found in the hybrid Fenton electrochemical, and it is possible to investigate this through a scaleup reactor with direct integration into an existing anaerobic-aerobic unit of textile [165].
Finally, a variety of treatment techniques, such as biological remediation, physicochemical treatment, and electrochemical techniques like electrochemical/electrocatalytic reduction, oxidation, and electrocoagulation, will be needed due to the diversity and complexity of chemical water pollutants.The use of electrocatalytic treatment with contaminated water is becoming more common due to the falling cost of renewable energy sources and the growing need to transform harmful substances into harmless or beneficial compounds.While electrocatalytic reduction can handle streams containing oxidized species like nitrate and nitrite produced by fertilizer runoff, electrocatalytic oxidation can handle a variety of industrial waste streams, including textile and food effluents.Because of these benefits and their small-scale suitability, electrocatalytic processes are perfect for decentralized water treatment.Electrocatalysis has the potential to have a sustainable impact on converting harmful water pollutants into valuable or harmless substances with the increasing availability of cheap electricity from renewable sources.

Electrosynthesis
Electrochemical organic synthesis (or electrosynthesis) has now become a tool to synthesize new compounds via green chemistry [166].They can function at room temperature and pressure and mainly do not require auxiliary chemicals.Typically, the process of electrosynthesis relies on the use of an electrochemical reactor supplied by a power source [167].Two parameters are keystones for obtaining high efficiency of electrosynthesis.First, the reactor design is crucial for obtaining a high production yield.Second, electrode characteristics (material, number, size, geometry, and surface area) are an essential consideration for the quantity of electrogenerated compounds, since electrodes are the site hosting the electrochemical reactions [168].
Alternatively, the use of electrical current through a reaction to activate organic molecules by means of the addition or removal of electrons possesses several advantages, such as the simplicity and high selectivity of reactions and the availability of the synthetic materials (low cost, simplicity of uses, needleless for a separation method, etc.).In addition, electrosynthesis can be modular and scalable, allowing for flexibility in production capacity [169].Electrooxidation and electrosynthesis methodologies have been developed for the selective functionalization of organic molecules, including C-H activation, C-C bond formation, and asymmetric synthesis.This field is important in many major industrial processes such as chlorine generation [170], aluminum manufacturing [171], production of decarbonized nitrogen-based fertilizers [172], drug synthesis [173], and many others [174].
This part shows a few examples dealing with the synthesis of new organic molecules by electrochemical pathways.The first example focuses on the synthesis of nitrogen-based fertilizers (NBFs) by electrochemical methods.The synthesis of NBFs, such as ammonia and urea, was successfully realized by using waste compounds, such as carbon dioxide and nitrates [175].The work largely focused on understanding the catalytically active sites for urea electrosynthesis.In fact, selectivity, and activity dependence on the relative composition of the copper and zinc oxide catalyst was found and assigned to a synergetic electronic effect.On the other hand, amorphous nanomaterials were used as catalysts, with the reaction involving electrochemical synthesis of N-containing compounds from a variety of abundant N-containing small molecules (N 2 , NO, NO 3 − etc.. . .).The results show that these materials can simplify (break) the C-N coupling bond, leading to the synthesis of urea [176].
Practically, producing decarbonized nitrogen-based fertilizers (NBFs) was developed by CASFER technologies by bringing together nanotechnology and electrochemical science.In fact, they were able to develop precise, commercial-like NBFs from wastestreams.They used an organic synthetic approach (OSA) to produce NBFs, with ingredients predictability and reliability designed to stimulate plant growth [177].
Moreover, chlor-alkali electrolysis is one of the oldest and most implemented processes and has the most significant applications of electrochemistry in industry.This process consists of producing chlorine and sodium hydroxide (NaOH), which are commodity chemicals required by industry.Here, electrolysis was identified as a green method for molecular transfer.The electrons in these electrochemical reactions are waste-free when generated by solar energy and wind.
The importance of electrosynthesis was also implemented for the functionalization of molecules in a sustainable way, minimizing the use of toxic reagents and byproducts.This is implemented by alkene difunctionalization, stereoselective heterocyclic synthesis, and carboxylation reaction [178].
In addition, a very recent study by Talebi and co.described the electrochemical synthesis of sulfonamide derivatives known among the most widely used antibiotics in the world [179].The electrosynthesis conditions and reaction pathways were studied.The optimal values of the operating parameters (pH, solvent, electrodes. ..) were evaluated.By optimizing the conditions, the control of the reaction kinetically and thermodynamically using the electrode potential was promising (Figure 6).In fact, this method was able to show the selectivity to oxidize or to reduce a given compound, preventing, then, the oxidation/reduction of intermediates.This electrochemical method of synthesis of sulfonamides over classical ways has many advantages: -Allow the use of green oxidants, which reduces the use of toxic compounds/solvents and prevents environmental risks; -Rely on electrification as an energy source, which decreases the amount and cost of the energy consumed; -Prevent the uses of additional catalysts; -Rely on a less complicated setup for the simplicity of the technical procedure.
Hydrogen peroxide (H 2 O 2 ) can also be synthetized using electrochemistry.In fact, the cathodic two-electron (2e − ) oxygen reduction reaction (ORR) conducts the electrosynthesis of H 2 O 2 .This reaction typically occurs under alkaline conditions and requires a suitable catalyst to enhance the efficiency of the process.Various catalysts, including metal complexes and metal oxides, have been investigated for this purpose.Some studies show the importance of a free Fe motif-based electrocatalyst for hydrogen peroxide synthesis [180].This use of isolated Fe led to high activity, selectivity, and stability due to high binding energy with the intermediates to break the peroxyl bond into H 2 O [181].
-Allow the use of green oxidants, which reduces the use of toxic compounds/solvents and prevents environmental risks; -Rely on electrification as an energy source, which decreases the amount and cost of the energy consumed; -Prevent the uses of additional catalysts; -Rely on a less complicated setup for the simplicity of the technical procedure.Hydrogen peroxide (H2O2) can also be synthetized using electrochemistry.In fact, the cathodic two-electron (2e − ) oxygen reduction reaction (ORR) conducts the electrosynthesis of H2O2.This reaction typically occurs under alkaline conditions and requires a suitable catalyst to enhance the efficiency of the process.Various catalysts, including metal complexes and metal oxides, have been investigated for this purpose.Some studies show the importance of a free Fe motif-based electrocatalyst for hydrogen peroxide synthesis [180].This use of isolated Fe led to high activity, selectivity, and stability due to high binding energy with the intermediates to break the peroxyl bond into H2O [181].In conclusion, electrochemical synthesis is now proven as a promising pathway to avoid all the disadvantages, in terms of high energy consumption and the large amount of pollution generated by the classical method of chemical synthesis.

Electrochemical Protection
Metal structures exposed to aggressive environments (hostile, corrosive, marine environments, etc.) require continuous preventive maintenance to ensure prolonged and safe operation [182].Corrosion is identified as it occurs above water, in the splash zone, and subsea.In this part, we will discuss electrochemical metal corrosion protection to prevent corrosion in offshore gas platforms and underwater metal piping [183,184].
Electrochemical metal corrosion protection is the most appropriate method used and includes anodic and cathodic protections.Both methods rely on manipulating the electrochemical reactions at the metal's surface to prevent corrosion and extend the lifespans of steel structures in harsh marine environments [185].
The anodic protection (AP) system maintains the surface in an actively oxidizing state.This method involves applying an external electrical current to the metal, making it the anode in an electrochemical cell, which polarizes the surface to a more positive potential, thus inhibiting and preventing corrosion reactions [186,187].Another way to apply this method is by attaching sacrificial anodes made of more reactive metals that have higher electrical potentials, such as zinc or magnesium, to the metal structure.The sacrificial anodes corrode preferentially, protecting the structure from corrosion by sacrificing themselves.In some systems to maximize the protection level both ways can be used together [188].
The cathodic protection (CP) systems are another important method to reduce or arrest the corrosion of metal structures by lowering the metal potential using a cathodic current supplied by an anodic system [189,190].Two main types of CP systems are widely used: sacrificial anode cathodic protection (SACP) and impressed current cathodic protection (ICCP).Sacrificial anode cathodic protection (SACP) is mainly used for smaller offshore structures or locations with low-to-moderate corrosion rates.In SACP systems, the structure to be protected becomes the cathode of an electrochemical cell, while sacrificial anodes made of more reactive metals, such as zinc or aluminum, are attached to the steel monopiles [191].These sacrificial anodes corrode preferentially, effectively sacrificing themselves to protect the steel structure by providing a source of electrons that suppresses the oxidation of the steel.As a result, the sacrificial anodes need to be periodically replaced as they are consumed over time.However, ICCP systems are used in bigger offshore structures or located in areas with high corrosion rates.In fact, inert anodes composed of mixed metal oxides or platinized titanium are connected to an external power source [192].This power source applies a controlled electrical current to the steel structure, creating a protective cathodic potential that suppresses corrosion [193].ICCP systems offer precise control over the cathodic protection process.

Tools for Electrochemical Modeling
The field of electrochemical modeling has seen continuous advancements through improvements in computational techniques, software tools, and methodologies.Examples of this include COMSOL MUTIPHYSICS [194], MATLAB with Simulink [195], Battery Design Studio [196], Canton, DigiElch [197,198], Python [199], and others.These advances are crucial for the development of batteries, sensors and biosensors, fuel cells, and many other electrochemical applications [200].In recent years, electrochemical modeling has shown an increasing demand and has become a powerful tool for researchers and scientists.In fact, it allows for an understanding of complex systems and helps in the prediction and optimization of electrochemical devices under various conditions, and as a result, it reduces the study time and the cost (Figure 7).In addition, electrochemical modeling enables the virtual prototyping of devices and systems, allowing engineers to simulate performance, troubleshoot potential issues, and iterate designs before physical fabrication [201,202].Recently, to reduce animal testing, it became mandatory to model (bio)medical devices (including bioelectrochemical devices) to get Food and Drug Administration (FDA) approval, which highlights, again, the importance of electrochemical modeling [203][204][205].
In this part, we will give some examples of the recent research involving electrochemical modeling divided by application field.In the field of organic electrochemistry, Sigman et al. implemented statistical modeling tools for the design of redox-active organic molecules for the application as electrolytes in nonaqueous redox flow batteries [206].In the field of electrochemical reactors, the modeling and simulation of electrochemical reactors (ECRs) by computational fluid dynamics (CFD) techniques have been of crucial importance due to their main applications: electrosynthesis of chemicals and drugs, electrowinning of metals, chlor-alkali, redox flow batteries, water treatment, and fuel cells [207].In the field of nanoconfinement, Long et al. studied three nano-electrochemical techniques involving modeling to study multiphase chemistry under nanoconfinement: stochastic collision electrochemistry, single nanodroplet electrochemistry, and nanopore electrochemistry [208].In the field of hydrogen production using a proton-exchange membrane (PEM) electrolyzer, a modeling tool based on computational fluid dynamics (CFD) software, ANSYS/Fluent was used [209].In the field of fuel cells, which are a promising source of clean energy, COMSOL Multiphysics was used to incorporate a range of physical phenomena to simulate the performance of solid oxide fuel cells (SOFCs) [210].In another study, a numerical simulation of a three-dimensional model with a single flow channel was constructed.It provides a scientific basis for the control strategy and structural design of SOFCs [211].In the field of batteries, a study shows how the current implementation of the Doyle model in COMSOL in Li-ion battery electrodes can enhance the electrochemical dynamic of these batteries [212].
performance, troubleshoot potential issues, and iterate designs before physical fabrication [201,202].Recently, to reduce animal testing, it became mandatory to model (bio)medical devices (including bioelectrochemical devices) to get Food and Drug Administration (FDA) approval, which highlights, again, the importance of electrochemical modeling [203][204][205].In this part, we will give some examples of the recent research involving electrochemical modeling divided by application field.In the field of organic electrochemistry, Sigman et al. implemented statistical modeling tools for the design of redox-active organic molecules for the application as electrolytes in nonaqueous redox flow batteries [206].In the field of electrochemical reactors, the modeling and simulation of electrochemical reactors (ECRs) by computational fluid dynamics (CFD) techniques have been of crucial importance due to their main applications: electrosynthesis of chemicals and drugs, electrowinning of metals, chlor-alkali, redox flow batteries, water treatment, and fuel cells [207].In the field of nanoconfinement, Long et al. studied three nano-electrochemical techniques involving modeling to study multiphase chemistry under nanoconfinement: stochastic collision electrochemistry, single nanodroplet electrochemistry, and nanopore electrochemistry [208].In the field of hydrogen production using a proton-exchange The figure shows the maximum corrosion rate at the bottom of the pit, which is 2.3 higher after 30 days compared to the corrosion rate after 1 day.This is in line with the proton concentration being 2.2 higher after 30 days compared to 1 day (adapted from COMSOL MULTIPHYSICS website: www.comsol.comaccessed on 16 April 2024).
Modeling was also used for advancement in many other electrochemical applications; in thermo-electrochemical cells, the TEC Multiphysics model is constructed to provide a deeper understanding of the interplays between heat/mass transport and electrochemical reactions, with the objective of converting waste heat to electricity [213,214].In gasdiffusion electrodes, modeling and numerical investigation were used in the performance of the electrochemical reduction of carbon dioxide to methanol.A model was built to investigate the role of Cu 2 O-/ZnO-based gas-diffusion electrodes in enhancing the reduction of carbon dioxide into methanol inside an electrochemical cell.The model was simulated using COMSOL Multiphysics software and validated using the experimental results [215].In electrochemical machining (ECM), COMSOL Multiphysics software is used to optimize many parameters [216].

Electrochemistry in Education
Electrochemistry's importance in different scientific and technological fields has led to its inclusion in educational curricula.The incorporation of electrochemistry into education has evolved to be more interdisciplinary and aligned with current scientific and technological advancements.Here are two examples involving electrochemistry and education.
Potentiostats are crucial for research development in electrochemistry, but their cost is the principal drawback to their massive use.With the aim to provide an affordable alterna-tive for resource-constrained communities, a low-cost, portable electrochemical workstation that integrates an open-source potentiostat based on Arduino and a smartphone application was adopted in graduate teaching and research.It can perform the most used electrochemical techniques of cyclic and linear voltammetry and chronoamperometry [217].
On the other hand, electrochemistry is difficult to learn due to its abstract concepts involving macroscopic, microscopic, and symbolic representation levels.Studies have shown that students can visualize and improve their understanding of chemistry by using interactive computer animation and simulation.This study reports on the effect of the interactive computer animation and simulation module named "Interactive Electrolysis of Aqueous Solution" (IEAS) which was developed to aid students in learning electrolysis [218].Thus, it can be concluded that IEAS has an impact on enhancing students' understanding of the electrolysis concept, and the students are more motivated to learn electrochemistry.
Finally, hands-on experimentation with electrochemical cells, electrodes, electrolytes, and measurement devices remains the best choice to provide students with practical experience and reinforce theoretical concepts.Today, there are many manufacturers that can supply and provide academic institutions with an "Educational kit".This contains electrodes, electrolytes, and instructional materials, making it easier for instructors to incorporate electrochemistry into their curriculum (refer to the subsection to know the companies that might deliver these kits).These kits often include experiments with clear procedures that facilitate the integration of applied electrochemistry learning in the educational system.Herein, it is worth noticing that the MENA region faces a lack of institutions providing higher education programs in electrochemistry, despite the availability of diverse academic offerings.This deficit is particularly concerning, given the growing demand in numerous sectors of the job market for professionals equipped with electrochemical knowledge.As industries increasingly recognize the importance of electrochemistry in various applications, the absence of relevant educational opportunities underscores a critical gap that needs to be addressed.In the coming years, integrating electrochemical expertise into educational curricula across the region will be imperative to meet the evolving demands of the job market and foster innovation and growth in key sectors.

Electrochemical Companies
Many Electrochemical companies are found around the world.We represent some of them according to their locations.
Europe's electrochemical industry is characterized by its focus on sustainability and the circular economy, with significant investments in clean energy, battery technology, and recycling processes.The key players and initiatives include Northvolt (Stockholm, Sweden), Umicore (Brussels, Belgium), BASF (Ludwigshafen, Germany), ITM Power (Sheffield, United Kingdom), SOLVAY (Brussels, Belgium), etc.The electrochemical sector in the USA is diverse, with a strong emphasis on innovation and technology development, particularly in the areas of batteries and renewable energy-storage solutions.Some key players and areas of focus include Tesla Inc. (Texas, United States), 3M (Maplewood, United States), Dow Chemical Company (Michigan, United States), General Electric (Boston, United States), Albemarle Corporation (North Carolina, United States), etc.The MENA region's participation in the electrochemical sector is growing, particularly in renewable energy and related technologies, like green hydrogen production.Some key players are ACWA Power (Riyadh, Saudi Arabia), MASDAR (Abu Dhabi, United Arab Emirates), SABIC (Riyadh, Saudi Arabia), OQ (Muscat, Oman), etc.

Conclusions
Applied electrochemistry plays an important role in advancing technology, promoting sustainability, and addressing societal challenges across diverse fields.Its versatility, efficiency, and reliability make it an indispensable tool for innovation, progress, and problem-solving in the modern world.Over the next several years, it is expected that electrochemistry will occupy a solid position in many sectors and become a reference science for many researchers.This requires special attention for integrating electrochemical expertise into educational curricula worldwide to meet the evolving demands of the job market and foster innovation and growth in key sectors.On the other hand, the future of companies appears encouraging; however, companies should adapt to the market changes and address emerging challenges effectively to follow the evolution of electrochemical technology.

Figure 1 .
Figure 1.Main application of electrochemistry.Figure 1. Main application of electrochemistry.

Figure 1 .
Figure 1.Main application of electrochemistry.Figure 1. Main application of electrochemistry.

Figure 2 .
Figure 2. Illustration of the fabrication of batteries using raw materials, such as Pb, Li, and Co, and their tendency for shortage in the long term (left-hand side), followed by their end-of-life phase after usage and improper disposal, which poses hazards (right-hand side).In the center, the trend among recent and future companies is to recycle batteries and manufacture new ones in a sustainable manner, utilizing renewable resources, such as solar energy, wind power, bacteria, and enzymes.

Figure 4 .
Figure 4. SEM images of the surface morphology of oxide layers anodized in phosphoric acid at 50 V in dependency on the dwell time and the bath temperature (reproduced with permission from the publisher under license number 5777000505982) [120].

Figure 5 .
Figure 5. Common applications of electroanalysis used for the detection of biomolecules, pollutants, and analytes in environmental samples, pharmaceuticals, and clinical and biochemical diagnostics.

Figure 5 .
Figure 5. Common applications of electroanalysis used for the detection of biomolecules, pollutants, and analytes in environmental samples, pharmaceuticals, and clinical and biochemical diagnostics.

Figure 7 .
Figure 7. (a) Difference in battery temperature and airflow streamlines between the coupled solution and the one-way solution after 2100 s, (b) electrochemical modeling of corrosion protection of an oil platform using sacrificial anodes.The figure shows the potential of the steel surface, the parts of the steel surface with the highest (most anodic) values in this plot are the least protected, and (c) corrosion rate in µm/day four times.The figure shows the maximum corrosion rate at the bottom of the pit, which is 2.3 higher after 30 days compared to the corrosion rate after 1 day.This is in line with the proton concentration being 2.2 higher after 30 days compared to 1 day (adapted from COMSOL MULTIPHYSICS website: www.comsol.comaccessed on 16 April 2024).

Figure 7 .
Figure 7. (a) Difference in battery temperature and airflow streamlines between the coupled solution and the one-way solution after 2100 s, (b) electrochemical modeling of corrosion protection of an oil platform using sacrificial anodes.The figure shows the potential of the steel surface, the parts of the steel surface with the highest (most anodic) values in this plot are the least protected, and (c) corrosion rate in µm/day four times.The figure shows the maximum corrosion rate at the bottom of the pit, which is 2.3 higher after 30 days compared to the corrosion rate after 1 day.This is in line with the proton concentration being 2.2 higher after 30 days compared to 1 day (adapted from COMSOL MULTIPHYSICS website: www.comsol.comaccessed on 16 April 2024).

Table 1 .
Summary of the energy-storage devices (batteries), with their applications, advantages, and disadvantages.