No syntax errors found. CIF dictionaryDatablock: 1732-pn3s_sq
Please wait while processing .... Interpreting this report
| Bond precision: | C-C = 0.0040 A | Wavelength=0.76000 |
| Cell: | a=30.0322(6) | b=30.0322(6) | c=30.0322(6) |
| alpha=90 | beta=90 | gamma=90 | |
| Temperature: | 100 K |
| Calculated | Reported | |
| Volume | 27087.0(16) | 27087.0(16) |
| Space group | P n -3 | P n -3 |
| Hall group | -P 2ab 2bc | -P 2ab 2bc |
| Moiety formula | C42.77 H26.38 O16 Zr3 [+ solvent] | 1(C342.25 H211.09 O128 Zr24) |
| Sum formula | C42.77 H26.38 O16 Zr3 [+ solvent] | C344.19 H212.44 O127.99 Zr24 |
| Mr | 1069.97 | 8584.82 |
| Dx,g cm-3 | 0.525 | 0.526 |
| Z | 8 | 1 |
| Mu (mm-1) | 0.294 | 0.249 |
| F000 | 4248.2 | 4262.0 |
| F000' | 4203.75 | |
| h,k,lmax | 37,37,37 | 40,40,40 |
| Nref | 9184 | 11196 |
| Tmin,Tmax | 0.793,0.970 | |
| Tmin' |
| Correction method= # Reported T Limits: Tmin=0.793 Tmax=0.970 AbsCorr = MULTI-SCAN |
| Data completeness= 1.219 | Theta(max)= 28.278 |
| R(reflections)= 0.0288( 10761) | wR2(reflections)= 0.0898( 11196) |
| S = 1.103 | Npar= 216 |
The following ALERTS were generated. Each ALERT has the format
test-name_ALERT_alert-type_alert-level.
Click on the hyperlinks for more details of the test.
Alert level B
PLAT213_ALERT_2_B Atom C19 has ADP max/min Ratio ..... 4.4 prolat
PLAT213_ALERT_2_B Atom C20 has ADP max/min Ratio ..... 4.3 prolat
PLAT919_ALERT_3_B Reflection # Likely Affected by the Beamstop ... 2 Check
PLAT920_ALERT_1_B Theta(Max) in CIF and FCF Differ by ........... 2.16 Degree
Alert level C
PLAT213_ALERT_2_C Atom C2AA has ADP max/min Ratio ..... 3.5 prolat
And 7 other PLAT213 Alerts
PLAT213_ALERT_2_C Atom C16 has ADP max/min Ratio ..... 3.1 prolat
PLAT213_ALERT_2_C Atom C17 has ADP max/min Ratio ..... 3.1 prolat
PLAT213_ALERT_2_C Atom C18 has ADP max/min Ratio ..... 3.7 prolat
PLAT213_ALERT_2_C Atom C21 has ADP max/min Ratio ..... 3.5 prolat
PLAT213_ALERT_2_C Atom C22 has ADP max/min Ratio ..... 4.0 prolat
PLAT213_ALERT_2_C Atom C70 has ADP max/min Ratio ..... 4.0 prolat
PLAT213_ALERT_2_C Atom C75 has ADP max/min Ratio ..... 3.7 prolat
PLAT220_ALERT_2_C NonSolvent Resd 1 C Ueq(max)/Ueq(min) Range 3.9 Ratio
PLAT250_ALERT_2_C Large U3/U1 Ratio for Average U(i,j) Tensor .... 3.1 Note
PLAT911_ALERT_3_C Missing FCF Refl Between Thmin & STh/L= 0.600 41 Report
PLAT913_ALERT_3_C Missing # of Very Strong Reflections in FCF .... 14 Note
PLAT918_ALERT_3_C Reflection(s) with I(obs) much Smaller I(calc) . 9 Check
Alert level G
FORMU01_ALERT_1_G There is a discrepancy between the atom counts in the
_chemical_formula_sum and _chemical_formula_moiety. This is
usually due to the moiety formula being in the wrong format.
Atom count from _chemical_formula_sum: C344.19 H212.4399 O127.99 Zr2
Atom count from _chemical_formula_moiety:C342.2499 H211.0899 O128 Zr24
FORMU01_ALERT_2_G There is a discrepancy between the atom counts in the
_chemical_formula_sum and the formula from the _atom_site* data.
Atom count from _chemical_formula_sum:C344.19 H212.4399 O127.99 Zr24
Atom count from the _atom_site data: C342.1646 H211.0391 O127.9897 Zr
ABSMU01_ALERT_1_G Calculation of _exptl_absorpt_correction_mu
not performed for this radiation type.
CELLZ01_ALERT_1_G Difference between formula and atom_site contents detected.
CELLZ01_ALERT_1_G ALERT: Large difference may be due to a
symmetry error - see SYMMG tests
From the CIF: _cell_formula_units_Z 1
From the CIF: _chemical_formula_sum C344.19 H212.44 O127.99 Zr24
TEST: Compare cell contents of formula and atom_site data
atom Z*formula cif sites diff
C 344.22 342.19 2.03
H 212.46 211.06 1.40
O 128.00 128.00 0.00
Zr 24.00 24.00 0.00
PLAT003_ALERT_2_G Number of Uiso or Uij Restrained non-H Atoms ... 3 Report
PLAT004_ALERT_5_G Polymeric Structure Found with Maximum Dimension 3 Info
PLAT041_ALERT_1_G Calc. and Reported SumFormula Strings Differ Please Check
PLAT042_ALERT_1_G Calc. and Reported MoietyFormula Strings Differ Please Check
PLAT045_ALERT_1_G Calculated and Reported Z Differ by a Factor ... 8.00 Check
PLAT083_ALERT_2_G SHELXL Second Parameter in WGHT Unusually Large 8.16 Why ?
PLAT092_ALERT_4_G Check: Wavelength Given is not Cu,Ga,Mo,Ag,In Ka 0.76000 Ang.
PLAT186_ALERT_4_G The CIF-Embedded .res File Contains ISOR Records 1 Report
PLAT300_ALERT_4_G Atom Site Occupancy of O006 Constrained at 0.5 Check
And 3 other PLAT300 Alerts
PLAT300_ALERT_4_G Atom Site Occupancy of O007 Constrained at 0.5 Check
PLAT300_ALERT_4_G Atom Site Occupancy of O0AA Constrained at 0.5 Check
PLAT300_ALERT_4_G Atom Site Occupancy of O10 Constrained at 0.5 Check
PLAT301_ALERT_3_G Main Residue Disorder ..............(Resd 1 ) 62% Note
PLAT410_ALERT_2_G Short Intra H...H Contact H2AA ..H72 . 2.14 Ang.
x,1/2-y,3/2-z = 4_556 Check
PLAT606_ALERT_4_G Solvent Accessible VOID(S) in Structure ........ ! Info
PLAT720_ALERT_4_G Number of Unusual/Non-Standard Labels .......... 8 Note
PLAT811_ALERT_5_G No ADDSYM Analysis: Too Many Excluded Atoms .... ! Info
PLAT860_ALERT_3_G Number of Least-Squares Restraints ............. 18 Note
PLAT869_ALERT_4_G ALERTS Related to the Use of SQUEEZE Suppressed ! Info
PLAT870_ALERT_4_G ALERTS Related to Twinning Effects Suppressed .. ! Info
PLAT883_ALERT_1_G No Info/Value for _atom_sites_solution_primary . Please Do !
PLAT912_ALERT_4_G Missing # of FCF Reflections Above STh/L= 0.600 1 Note
PLAT931_ALERT_5_G CIFcalcFCF Twin Law ( 1-1 0) Est.d BASF 0.49 Check
PLAT933_ALERT_2_G Number of OMIT Records in Embedded .res File ... 6 Note
PLAT950_ALERT_5_G Calculated (ThMax) and CIF-Reported Hmax Differ -3 Units
PLAT951_ALERT_5_G Calculated (ThMax) and CIF-Reported Kmax Differ -3 Units
PLAT952_ALERT_5_G Calculated (ThMax) and CIF-Reported Lmax Differ -3 Units
PLAT958_ALERT_1_G Calculated (ThMax) and Actual (FCF) Lmax Differ 3 Units
PLAT984_ALERT_1_G The O-f'= 0.0106 Deviates from the B&C-Value 0.0127 Check
PLAT984_ALERT_1_G The Zr-f'= -2.9673 Deviates from the B&C-Value -1.9286 Check
PLAT985_ALERT_1_G The O-f"= 0.0060 Deviates from the B&C-Value 0.0071 Check
PLAT985_ALERT_1_G The Zr-f"= 0.5597 Deviates from the B&C-Value 0.6364 Check
0 ALERT level A = Most likely a serious problem - resolve or explain
4 ALERT level B = A potentially serious problem, consider carefully
13 ALERT level C = Check. Ensure it is not caused by an omission or oversight
37 ALERT level G = General information/check it is not something unexpected
14 ALERT type 1 CIF construction/syntax error, inconsistent or missing data
17 ALERT type 2 Indicator that the structure model may be wrong or deficient
6 ALERT type 3 Indicator that the structure quality may be low
11 ALERT type 4 Improvement, methodology, query or suggestion
6 ALERT type 5 Informative message, check
|
It is advisable to attempt to resolve as many as possible of the alerts in all categories. Often the minor alerts point to easily fixed oversights, errors and omissions in your CIF or refinement strategy, so attention to these fine details can be worthwhile. In order to resolve some of the more serious problems it may be necessary to carry out additional measurements or structure refinements. However, the purpose of your study may justify the reported deviations and the more serious of these should normally be commented upon in the discussion or experimental section of a paper or in the "special_details" fields of the CIF. checkCIF was carefully designed to identify outliers and unusual parameters, but every test has its limitations and alerts that are not important in a particular case may appear. Conversely, the absence of alerts does not guarantee there are no aspects of the results needing attention. It is up to the individual to critically assess their own results and, if necessary, seek expert advice. Publication of your CIF in IUCr journalsA basic structural check has been run on your CIF. These basic checks will be run on all CIFs submitted for publication in IUCr journals (Acta Crystallographica, Journal of Applied Crystallography, Journal of Synchrotron Radiation); however, if you intend to submit to Acta Crystallographica Section C or E or IUCrData, you should make sure that full publication checks are run on the final version of your CIF prior to submission. Publication of your CIF in other journalsPlease refer to the Notes for Authors of the relevant journal for any special instructions relating to CIF submission. |
| Datablock 1732-pn3s_sq - ellipsoid plot |
|
|