Mapping Wheat Dry Matter and Nitrogen Content Dynamics and Estimation of Wheat Yield Using UAV Multispectral Imagery Machine Learning and a Variety-Based Approach: Case Study of Morocco

: Our work aims to monitor wheat crop using a variety-based approach by taking into consideration four different phenological stages of wheat crop development. In addition to highlighting the contribution of Red-Edge vegetation indices in mapping wheat dry matter and nitrogen content dynamics, as well as using Random Forest regressor in the estimation of wheat yield, dry matter and nitrogen uptake relying on UAV (Unmanned Aerial Vehicle) multispectral imagery. The study was conducted on an experimental platform with 12 wheat varieties located in Sidi Slimane (Mo-rocco). Several flight missions were conducted using eBee UAV with MultiSpec4C camera according to phenological growth stages of wheat. The proposed methodology is subdivided into two approaches, the first aims to find the most suitable vegetation index for wheat’s biophysical parameters estimation and the second to establish a global model regardless of the varieties to estimate the biophysical parameters of wheat: Dry matter and nitrogen uptake. The two approaches were conducted according to six main steps: (1) UAV flight missions and in-situ data acquisition during four phenological stages of wheat development, (2) Processing of UAV multispectral images which enabled us to elaborate the vegetation indices maps (RTVI, MTVI2, NDVI, NDRE, GNDVI, GNDRE, SR-RE et SR-NIR), (3) Automatic extraction of plots by Object-based image analysis approach and creating a spatial database combining the spectral information and wheat’s biophysical parameters, (4) Monitoring wheat growth by generating dry biomass and wheat’s nitrogen uptake model using exponential, polynomial and linear regression for each variety this step resumes the varietal approach, (5) Engendering a global model employing both linear regression and Random Forest technique, (6) Wheat yield estimation. The proposed method has allowed to predict from 1 up to 21% difference between actual and estimated yield when using both RTVI index and Random Forest technique as well as mapping wheat’s dry biomass and nitrogen uptake along with the nitrogen nutrition index (NNI) and therefore facilitate a careful monitoring of the health and the growth of wheat crop. Nevertheless, some wheat varieties have shown a significant difference in yield between 2.6 and 3.3 t/ha. and


Introduction
Precision agriculture has demonstrated its potential by englobing advanced technologies to ensure efficiency gains and to alleviate food security allowing the implementation of modern management and decision tools [1]. As an ever-evolving discipline, precision agriculture has proven its efficiency when it comes to overcoming the major limits of research aiming to tackle climate variations along with excessive consumption. Therefore, analysts foresee an agro-technological revolution, where precision agriculture is believed to play a key role as an innovative production system, which relies on input management in a field based on actual crop needs while optimizing deployed resources [2,3]. For this purpose, it aims to control the production chain and the factors that influence it by exploiting new technologies such as GNSS (Global Navigation Satellite System) and remote sensing to manage crops and reduce the use of fertilizers, pesticides and water [4].
A recent study by Hexa Reports suggests that precision agriculture is expected to reach 43.4 billion dollars by 2025 [5]. Hence, it is viewed as a promising field in continued expansion, including the use of the remote sensing approach, which offers a viable alternative for determining crop status due to its ability to capture large areas at the same time [6] Especially with the widespread of the use of UAV technology allowing a low-altitude remote sensing and the ability to use various sensors thermal, hyperspectral and optical [7,8].This discipline is ubiquitous in Morocco because of its predominantly agricultural economy, where the national production of cereals is highly exposed to climate fluctuations because it is concentrated mainly in arid and semi-arid areas with limited land and water resources [9].
Wheat is one of the most highly regarded crops for national monitoring because it has been an essential food source for the population for centuries [10]. Therefore, the prediction of its yield is a necessity since it is a tool of great interest for decision-making and the basis of measured planning [11]. Indeed, in order to ensure food security, yield prediction makes it possible to prepare for the consequences of an agricultural shortage, by reducing vulnerability to climatic hazards and to plan in advance aid to farmers and cereal imports. In the case of agricultural insurance, yield estimation quantifies the impacts of droughts when they occur to properly determine compensation. It also allows producers who commit to export their crops to plan their actions and decision based on the results of the prediction [12]. Thus, several studies have been conducted to predict wheat yield. We specify the study of Hassan et al. in 2018 [13], which was held in China specifically in Beijing and its objective is to estimate the agricultural yield of wheat for 32 varieties, six flight missions that correspond to the following phenological stages: heading, flowering, seed development (Beginning of the stadium milky, soft pasty stage and hard pasty) were made with flight heights between 30 m and 40 m in order to reach spatial resolutions of 2.5 cm to 2.8 cm by the Sequoia camera. Moreover, the data acquisition was conducted over two phases. Firstly, the extraction of the 9 m 2 plots allowed obtaining the following in-situ data: Number of grains per ear and number of ears for each plot. Secondly, the use of Sequoia multispectral camera and Pix4D Mapper for data post-processing allowed the use of the following vegetation indices: GNDVI, SR-NIR, RECI and NDRE. A correlation between the vegetation indices and the in-situ data using R package for linear regression gave a coefficient of determination R 2 greater than 0.80 in the soft pasty stage between the different vegetation indices and the in-situ collected data [10]. Similarly, and using the Kmeans model, Guan et al. in 2019 [14] has explained the use of unmanned aerial vehicle (UAV) and multispectral imagery in the agricultural field. Their work was to calculate the agricultural yield of wheat and rice. For wheat cultivation UAV flight missions have been programmed with a flight height ranging from 30 m to 100 m and using the Parrot Sequoia camera. 24 plots were collected between flowering and maturity phenological stages and having an area of 8 m × 14 m. The NDVI (Normalized Difference Vegetation Index) is the only vegetation index used, which resulted in a coefficient of determination of 0.81 with wheat yield during the grain development stage [13]. Throughout this study we aim to:


Monitor wheat crop and estimate its yield using UAV technology multispectral imagery.


Evaluate the use of the Red-Edge band in agricultural remote sensing applications.


Use of regression functions and Random Forest as a machine learning technique for prediction purposes in agriculture.  Elucidate the ability of different vegetation indices to estimate the biophysical parameters of wheat crop, namely dry matter and nitrogen uptake considering wheat's phenotypical diversity and phenological stages.
In the following paper, we will discuss three main sections: the first one enumerates the material and the methods used, the second is a presentation of the obtained results followed by a discussion. The last section is an overall conclusion and recommendations allowing a quick overview and confrontation of the present work with those to come.

General Methodology
Having a multispectral camera as a payload, the use of UAV allowed the execution of several flight missions during various stages of wheat development, namely the end of tillering, two nodes, the flag leaf fully unrolled and during the ripening stage before and after extraction of the plots. The images resulting from the executed missions were postprocessed and hence permitted the generation of the following outputs: orthomosaic and vegetation index maps: NDVI, NDRE, GNDVI, GNDRE, SR-RE, SR-NIR, RTVI and MTVI2. By using both UAV's multispectral imagery and in-situ data, a database containing both vegetation index values and the biophysical parameters of wheat crop, dry matter and nitrogen uptake was created.
The approach adopted in this study ( Figure 1) is primarily to analyze the response of each vegetation index to each wheat variety in order to decide on the hypothesis of variation of vegetation indices by genotype of wheat and according to the biophysical characteristics of each variety. After that, a general approach that consists of establishing a model utilizing firstly the Random Forest technique and secondly a linear regression. For UAV's imagery we have used World Geodetic System 1984 or WGS84 before generating the UAV's products. Therefore, during this whole study we have used Merchich North Morocco's coordinate system for georeferenced orthomosaics, reflectance and vegetation indices maps.

Study Area
This study took place in Morocco at the experimental platform of the agricultural domain HAMMA located in the province of Sidi Slimane ( Figure 2). The experimental platform used in our study is exploited essentially for durum and bread wheat crop cultivation. It is composed of 28 micro-platforms of 300 m 2 each with different varieties. The sowing date is 06 of December 2018. The general disposition of microplatforms upon the experimental platform is presented in Figure 3 where DW stands for durum wheat and BW stands for bread wheat.

Acquisition of UAV's Multispectral Imagery
The used UAV platform was eBee Classic with MultiSPEC 4C camera as a payload ( Figure 4). Table 1 presents some main characteristics of the used UAV platform and the multispectral camera. Seven flight missions were executed at different dates during different stages of wheat growth. At each phenological stage, two flights before and after the sampling are conducted. The objective of having two flights is to be able to find the location of the experimental plots after postprocessing the images. An individual final mission was done during the maturity stage. However, planning a UAV flight mission is a crucial step that conditions the spatial and spectral resolution of the resulting images [14]. And knowing that fixed-wing UAVs are more susceptible to external disturbances, we have taken into account the following parameters due to their importance in precision agriculture purposes: Flight altitude, wind speed, longitudinal and lateral overlaps as well as safe take-off and landing sites using the same ROI (Region of Interest) polygon of the experimental platform [15,16].
The characteristics of each mission by phenological stage are presented in the Table  2.  Before executing the flight missions using the MultiSPEC 4C camera, radiometric calibration images must be taken. This calibration is performed to obtain reflectance measurements from the acquired images. It is performed using a calibration target provided by the manufacturer. To succeed the calibration process, the lighting conditions of the sensor of multiSPEC 4C camera and the calibration target must be identical to the lighting conditions encountered by the eBee during its mission ( Figure 5). Thus, the target must be exposed to the sky and clear of shadows during the calibration procedure. The UAV must be placed above the target, it must be horizontal, with a minimum distance of 50 cm and maximum of 1 m (Technical Guide MultiSPEC 4C). Once placed, the camera automatically takes several calibration images, with a pause of about 3 s between each image.

Collecting In-Situ Data
During plant growth, field samples are taken at the end of tillering stage (BBCH (Biologische Bundesanstalt bunderssortenamt and CHemical industry) 29-30), two nodes (BBCH 32) and flag leaf fully unrolled (BBCH 39). These samples count three plots of 0.5 m × 0.5 m each, chosen so that they can reveal the state of the whole microplatform. Measurements are made on each plot, which enables quantitative and qualitative data to be collected on the state and development of the crop. The objective of this step is to quantify the biophysical parameters and nutrient uptake of wheat for each variety. It is thus enrolled on two phases:


Field phase: The data collected directly from the field, at the level of each plot and at each stage are: Length of the stem, presence of pests, weeds and diseases, state of the plant and weight of the sample.


Laboratory phase: Samples of 50 to 100 plants are collected and sent to the laboratory to extract the following results: Fresh matter, dry matter and total nitrogen content. The quantity of fresh and dry matter is estimated by measuring the weight of the sample of the collected plants with a balance (fresh weight) then dried for 24 to 48 h at 80 °C (constant weight), cooled and weighed again (weight dry). For the nitrogen content Dumas combustion method was used [17].

Multispectral UAV Images Processing
First, the acquired images were preprocessed and geolocated using the trajectory data contained in the EXIF and Log files. The radiometric calibration of the images was also performed while automatically selecting the coefficients resulting from the calibration targets (Airinov Aircalib used in our case is included among the targets detected automatically by Pix4D) performed using the calibration images acquired before each flight and for each multispectral band [18]. The use of a radiometric calibration target makes it possible to calibrate and correct the radiance values of the pixels according to the values given by the calibration target by taking into account the lighting conditions on the date, at the same time and location of the image capture [19].
The processing of acquired UAV images was conducted for each flight mission. We used Pix4D [20] solution for this purpose. The workflow consists of three main steps: Initial processing, generating dense point clouds and generating digital surface models (DSM), orthomosaics and reflectance maps [21]. During the initial processing, the position of the matching points is calculated. These points are used to consolidate the correspondence between images. Subsequently, an AAT (Automatic Aerial Triangulation) and a bundle block adjustment (BBA) are executed which allow the calculation of the 3D position of the camera at each capture as well as the coordinates of the matching points. Finally, automatic matching points are created and thus constituting the basis for the next processing steps (Pix4D support). The next step is the generation of a dense point cloud where additional tie points are created based on the automatic connection points that result in a dense point cloud and a 3D textured mesh which can be created using the dense point cloud. The final step aims to create a digital surface model (DSM) that allows the generation of orthomosaic and reflectance maps.

Automatic Extraction of Plots
The objective of this step is to extract the field plots during each phenological stage from the corresponding UAV imagery ( Figure 6). First, the orthomosaics of each band (NIR, Red, Green and Red-Edge) were readjusted before and after sampling using calibration points. In order to eliminate soil surrounding the experimental plots, one mask of each microplatform was then created per multispectral band for the flag leaf fully unrolled stage orthomosaic. And in order to automatically extract the experimental plots, we used an object-based image analysis approach (eCognition [22]). We first conducted a chessboard segmentation to create objects which size is equal to that of pixels, followed by a spectral difference segmentation based on a merging algorithm in which neighboring objects where the spectral average is below a given threshold (maximum spectrum difference in our case 13) will be merged to produce the final objects. To use the latter algorithm, a prior segmentation was necessary [23]. After which multiresolution segmentation was performed having as parameters a scale of 100, 0.9 for shape and 0.9 for compactness. We finally performed a classification step enabling the extraction of the plots' positions and their reflectance values.

Generation of Vegetation Index Maps
We then calculated the vegetation indices maps in which the value of each pixel is calculated using a formula combining different bands of reflectance maps. Throughout this study, we used eight vegetation indices. We chose indices that used different spectral bands to evaluate the effect of integrating the Red-Edge band. Other criteria upon which we built our choice is the nature of the combination and the number of bands used by the index. Table 3 presents the indices used in this study.

Building a Spatial Database for the Experimental Platform
The extraction of experimental plots during each flight allowed the attribution of insitu data by establishing a database combining both the geographic information contained in the result of the extraction and the biophysical parameters of each plot using an attribute table. Moreover, the extraction of spectral information of each plot was performed using vegetation index maps and added to the attribute table. Similarly, extracting microplatforms was necessary so as to quantify dry biomass and nitrogen content and prevent the soil component from being considered during the modeling phase. A rule set was implemented on eCognition for each stage of wheat development and using the selected vegetation index from the varietal approach using both segmentation and classification methods. The obtained mask was subsequently exported in .tif format and then applied (Figure 7).

Monitoring Wheat Growth
Monitoring wheat growth was performed using two biophysical parameters of wheat: the nitrogen uptake and the amount of dry matter. This step consists of determining the statistical models that will allow the calculation of the two biophysical parameters of wheat from the vegetation indices mentioned previously. To do this, we adopted two approaches: Varietal approach and general approach.

Varietal Approach
To take into consideration the genetic difference between the different varieties of wheat, a modeling exercise was carried out for each of the eight microplatforms where the in-situ data were taken. The purpose of this approach is to evaluate the response of each vegetation index to the diversity of wheat varieties and its ability to estimate the dry matter and nitrogen uptake using the following regression models: linear regression, second order polynomial regression and exponential regression. The result of this step is the calculation of the determination parameters (R 2 and RMSE) of each regression model that expresses dry biomass (t/ha) and nitrogen uptake (Unit/ha) as a function of each vegetation index. This approach also allowed us to select and determine the best-suited vegetation index and the regression model to express the nitrogen uptake and the dry matter for each variety using RMSE and R 2 metrics.

General Approach
This approach consists in generalizing the statistical modeling for all the varieties of our experimental platform, in order to be able to estimate wheat yield for the all present wheat varieties given the absence of in-situ data for these microplatforms. The generalization of the model was based on the selected vegetation index using a prior varietal approach. On the first hand, the model was generalized using regression functions after which the model presenting a high value of R 2 and a low RMSE was maintained. On the other hand, the estimation of wheat yield and biophysical parameters for plots using the machine learning method Random Forest (RF) which is an ensemble learning method that uses multiple decision trees, with the ability to obtain a good fit and reduce noise. Where the final estimation result is obtained by voting [24]. RF was performed given its satisfactory results when used to predict biophysical parameters of different plant varieties, particularly wheat [25,26]. Random Forest was employed using Scikit-Learn library and Spyder IDE on Anaconda [27,28]. A python script was developed to model the amount of dry matter and nitrogen uptake thus estimate these parameters for each microplatform.
One of the important parameters of the RF regression is n_estimators (Number of estimators) defined as the number of trees in the random forest [29]. We conducted a set of tests to see how RF works, a sequence of numbers of the estimators has been produced from 20 up to 500. The final value of the n-estimators parameter was fixed iteratively and according to the coefficient of determination R 2 and RMSE (Maximize the value of R 2 and minimize that of the RMSE) ( Figure 8). For each new choice of parameters, the value of the Random_State parameter is set to 0, which makes the output of the model replicable for the same inputs. By analyzing the obtained results, we notice that a number of estimators equal to 150 for the nitrogen uptake shows a high R 2 values and a low RMSE from which a stagnation of R 2 as well as a stationary variation of the RMSE are observed. Similarly, the R 2 curve peaks at the value 150 of the number of dry matter estimators, which justifies the adoption of this value for the training of the random forest regression model.

Mapping Critical nitrogen, Dry Biomass and Nitrogen Nutrition Index
The difference between critical nitrogen and nitrogen uptake maps indicates the required nitrogen need to be added for the plant to ensure its normal development and maximize dry matter production.
where DM is the dry matter expressed in t/ha and N (%) the total concentration of nitrogen. For mapping the nitrogen nutrition index (NNI), we used following model [31]: where:  [34]. Given the unavailability of certain data such as the number of grains per ear, the soil moisture and the water use efficiency calculated as the rate of assimilation of CO2 divided by the rate of plant transpiration, the indirect estimation of wheat yield was adopted using dry matter and vegetation indices. The Equations (4) and (5) were then readjusted to fit our experimental platform specifications. While taking into consideration that the harvest index of modernized cereal crops is between 0.63 and 0.75 [35] and therefore the values HI_Max and HI_Range have been chosen as follows: HI_Max = 0.82 And HI _Range = 0.12. Considering the results of our varietal and general approaches, we were interested in replacing NDVI by the RTVI index in the formula, since the RTVI vegetation index showed a maximum coefficient of determination with biomass throughout the stages of wheat development. The adjusted model when taking into account available data and UAV's missions timing is then expressed as: Thus, wheat yield is expressed using RTVI as follows: WY = ABG * HI RTVI (7) Figure 9 illustrates the generated vegetation index maps for NDVI, NDRE, GNDVI, GNDRE, SR-RE, SR-NIR, MTVI2 and RTVI during the last leaf stage before plots are collected. The indices NDVI, SR-NIR and MTVI2 allowed to follow the growth and the evolution of the dry matter but with a nonlinear rate which leads to a saturation of index starting from a certain value of dry matter ( Figure 10). As a result, it is found that they take almost equal values for different values of the dry matter so these indices are insensitive to the variation of the dry matter from a certain value. This insensitivity is mainly due to the nature of the combinations of the bands used in the formula of the vegetation index which does not allow a variation of the indices adapted to the variation of the dry matter.

Vegetation Indices Maps and Reflectance Maps
The integration of the red-edge band makes it possible to linearize the relation between the index and the characteristics of the vegetation such as the dry matter. The RTVI, SR-RE and NDRE indices showed an improved correlation compared to other indices that do not integrate the red-edge band. This improvement strongly depends on the type of combination and the number of used bands. For NDRE the red-edge band did not add any improvement to the correlation contrary to the SR-RE and RTVI indices for which the correlation with the dry matter is strong. We have noticed that the use of the green band instead of the red one for the GNDVI and GNDRE indices did not satisfy the needs and objectives of the current study. The GNDVI and GNDRE indices did not allow the monitoring of the biophysical parameters of wheat crop in our case of study. This will also be shown in the results of R 2 and RMSE.  The vegetation indices tested in this study were selected to assess the contribution of the RedEdge band and the influence of number of bands and nature of the combination used by the index on its performance, by evaluating its correlation with the biophysical parameters of the wheat crop and plotting dry matter by each vegetation index.

Statistical Modeling and Wheat's Biophysical Parameters Mapping
Using the selected models of the varietal approach, maps of dry biomass, nitrogen uptake, the NNI and the difference between critical and nitrogen uptake were generated  Table 4 summarizes the results of modeling determinants for each variety to estimate dry matter and nitrogen uptake by all three types of models. It represents the average of the R 2 and RMSE coefficients, at the level of each variety and for each index. In terms of dry matter and nitrogen uptake modeling, the RTVI index presents the best average values of R 2 and RMSE compared to the results of the other indices. This is interpreted by the fact that the RTVI is the more suitable index for the dry matter and nitrogen modeling operation for all the studied varieties. Therefore, RTVI is the index selected to establish the models for estimating wheat biophysical parameters studied at this project. Maps of dry matter, nitrogen uptake, NNI and the difference between critical nitrogen and nitrogen uptake were established using the vegetation index and a model selected based on R 2 and RMSE metrics RMSE ( Figure 11). By considering the general approach, the dry matter and nitrogen uptake models for all the varieties of the platform were estimated using linear, 2nd order polynomial and exponential regression functions considering the RTVI index. The following table (Table  5) shows the R 2 and RMSE determination parameters for each regression model. The linear model provides the highest correlation value between the RTVI index and the dry matter as well as for the nitrogen uptake variable. Based on these models (Table 6), the dry matter and nitrogen uptake maps were generated for all varieties at the platform and from this the Nitrogen Nutrition Index and the difference between nitrogen uptake and critical nitrogen have been established ( Figure 11). When using Random Forest technique at each stage of development of wheat, we were able to retrieve R 2 and RMSE for the test set described in Table 7. Dry matter and nitrogen uptake maps were generated for the whole platform the Nitrogen Nutrition Index and the difference between nitrogen uptake and critical nitrogen were thus calculated ( Figure 12).  11. Dry matter and nitrogen uptake using varietal approach during end of tillering, two nodes and flag leaf fully enrolled stages.  (a) (b) Figure 12. Dry matter, nitrogen uptake, NNI, and difference between critical nitrogen and nitrogen uptake maps during end of tillering, two nodes and last leaf flag unrolled using (a) linear regression and (b) using Random forest.

Wheat Yield Prediction
One of the preliminary results for yield prediction is the harvest index for all the plots (Equation (6)). Thus, Figure 13 presents a diagram that compares the values of predicted yield according to both varietal and general approaches and allows to examine the differences from the harvested yield. By considering the varieties, the model allowed to estimate the yield up to 32% of the difference between the actual yield and a minimum difference of 7%. Furthermore, when using the general approach, Random Forest allowed a minimum difference of 1% and a maximum of 21% compared to the linear regression where a minimum gap of 0.2% and maximum of 29% are reached. Whereas Tables 8 and  9 represent the values of predicted yield of wheat using both varietal and general approach as well as the actual harvested yield in t/ha. Figure 13. Difference in % between actual and predicted wheat yield using both varietal and general approaches. Random Forest technique helped shorten the gap between the actual yield values and the predicted ones. The varietal approach for yield prediction did not have a large impact on the predicted values given the microplatforms size (300 m 2 ) and therefore the limited number of extracted plots during each period (2 to 3). However, the yield prediction model can be improved by increasing the number of flights acquired from wheat leaf development (BBCH1) to heading (BBCH5) and also from heading to maturity (BBCH8). This will allow the use of the cumulative RTVI values from each flight [33]. Moreover, the HImax parameter of the model adjusted to our experimental platform can be readjusted by generalizing the extraction of the plots in order to consider the platforms having a maximum yield among all the platforms present and not only those where plots were extracted. As a result, some late varieties have a gap of up to 2.4 t/ha and others are affected by the dry year confirmed by the Ministry of Agriculture [36].
The flight schedule was related to the phenological stages of wheat development that correspond to the BBCH scale at stages 29-30, 32 and 39, respectively. These stages make it possible to monitor the accumulation of wheat's dry matter and to ensure convenable nitrogen nutrition. Moreover, the late tillering is the stage for which the plant is able to produce tillers and therefore it can play an important role in the survival of wheat. During this stage, a strong relationship between the vegetation indices and the crop concerned is observed [37]. Additionally, flights during the two-node, last leaf flag unrolled stages allow estimation of wheat yield and dry matter [38]. However, the use of a fixed-wing drone requires a terrain with adequate take-off and landing sites. If there are obstacles in the area of the flight, safety measures must be taken to properly identify the landing locations.

Conclusions
The current study presents an example of the contribution of geospatial technologies in precision agriculture where UAV's multispectral imagery is considered as an important component in monitoring and estimating crop yield. Data acquisition phase can be described as an important step within our approach based essentially on the use of UAV's multitemporal and multispectral images as well as in-situ data, during five different phenological stages of wheat growth.
The proposed methodology aims to predict wheat's biophysical parameters namely, dry matter, nitrogen uptake and wheat yield. By establishing statistical models, using regression and Random Forest along with RTVI vegetation index. RTVI was selected based on the results of a varietal analysis considering 12 wheat varieties and 8 vegetation indices in which it presented better results in terms of RMSE and R 2 values and had a better correlation with wheat biophysical parameters. Furthermore, the current methodology has enabled us to estimate a difference between actual and predicted yield of about 1 to 21% for some varieties using Random Forest technique. The difference depends mainly on both variety and the used modeling technique. However, some wheat varieties have shown a significant difference in yield between 2.6 and 3.3 t/ha.
We highlighted the role of Red-Edge band and Machine Learning techniques in the estimation of agronomic parameters of different varieties of wheat. However, certain technical and general aspects regarding the above methodology need to be considered as recommendations for future works and studies. Namely, the integration of soil parameters such as soil type, runoff, drainage and meteorological parameters such as temperature, precipitation, humidity and evapotranspiration in the estimation model in order to refine its results. We also recommend to explore and compare alternative models for direct yield estimation to increase the precision of the model in terms of difference between groundtruth yield and estimated yield values as well as to generate a model adapted to the context of national agriculture.