Solar and Wind Data Recognition: Fourier Regression for Robust Recovery

: Accurate prediction of renewable energy output is essential for integrating sustainable energy sources into the grid, facilitating a transition towards a more resilient energy infrastructure


Introduction
The global effort to achieve sustainability and electrification spans various sectors, who are working together to reduce environmental impact transition and establish cleaner energy systems.Key steps include increasing solar and wind energy capture, implementing intelligent grids, adopting energy-efficient technologies, and promoting electric vehicles.These efforts will collectively drive progress towards a more sustainable energy future.
Solar energy is a vital option, relying on the sun's radiant power.Nonetheless, the challenge lies in ensuring a consistent sustainable energy supply, which requires s the integration of complementary clean energy sources.One such synergistic partner is wind energy which, when coupled with solar power, has the potential to provide a stable energy output throughout the day.Wind speed is one of the critical parameters that determine the production of electricity that the turbine can generate.The limitations imposed by the availability and accuracy of solar data also play an essential role in shaping the design of a solar energy system.This data is instrumental for individuals working in the solar energy production industry, enabling them to devise strategies to maximize the harnessing of energy from the sun, and enhance the overall efficiency of electricity generation.Inaccuracies or insufficient data may lead to suboptimal system configurations, affecting performance and potentially hampering the system's ability to fully leverage solar resources.Consequently, addressing these limitations is imperative for ensuring the effective utilization of solar energy for sustainable power generation.
Solar energy has been widely adopted and integrated into various sectors, such as the gas and oil industries, where solar energy has evolved into a primary source for essential utilities, including applications in water treatment [1][2][3].Accurate direct average irradiance data is necessary for commercial and residential solar panel installations.This data is crucial for calculating the optimal number of photovoltaic panels and determining the ideal angle between them, which maximizes energy efficiency [4].Direct normal irradiance (DNI) within solar radiation is the primary factor influencing concentrated solar power technologies, such as parabolic troughs, central receivers, linear Fresnel reflectors, and parabolic dish systems.Consequently, the efficiency of these technologies significantly diminishes in the presence of increasing cloud cover.In contrast, photovoltaic devices can generate electric power from diffuse irradiation.The comprehensive assessment of the technical and economic performance of solar energy technologies consequently hinges on the availability and accuracy of solar radiation data [5].
An accurate solar prediction is essential to ensure data reliabilityespecially in cases where instruments or sensors may experience failures, focusing on evaluating Artificial Neural Network (ANN)-based techniques and uncovering their advanced performance offers a superior alternative to conventional methods [6].Machine learning was employed to automatically generate accurate site-specific prediction models for solar power generation by using national weather service forecasts, with SVM-based models proving to be 27% more accurate than the existing ones [7].The integration of solar energy into modern grids was investigated, and a unified tool based on the Pearson correlation coefficient and a deep learning model (ANN) for real-time, short-term, and long-term solar energy predictions was proposed, highlighting ANN's superior performance and suggesting future exploration of different climate areas and deep learning models [8].Another study proposes a Cluster-Based Approach (CBA) with artificial neural network (ANN) and support vector machine (SVM) techniques, noting that it shows higher accuracy (MAPE 1.342%) in estimating daily global solar radiation, when compared to standalone ANN and SVM methods [9].Linear least squares regression and support vector machines that emphasize three kernel functions have also been explored, highlighting the optimal performance of radial basis functions (RBF) in solar radiation prediction, and the model's effectiveness in maximizing power capture and ensuring grid reliability [10].A simple model has been developed to estimate the monthly clearness index of solar and seasonal effects [11].Another method has been introduced to obtain the solar radiation rates and correct the data conventional models calculated from precise solar radiation information [12].
Predicting wind speed, also called wind forecasting, involves diverse methodologies and models to project the velocity and direction of the wind at a particular location and point in the future.Wind forecasting is essential for decision-making and designing controllers, observers, and fault detection schemes.The accuracy of wind speed forecasting is paramount in proficiently managing wind energy farms and maximizing energy output in a way that ensures the stability of the power grid and facilitates informed choices across various domains, including aviation, marine operations, and weather prediction.The efficiency of wind turbine power generation can be affected by geolocation information, such as wind speed and location.In some cases, the uncertainty of the wind speed can, from time to time in a specific area, be hard to estimate.Forecasting wind speed by using various patterns has also been claimed to be challenging because of inherently complex, and sometimes chaotic, weather parameters [13].
The most recent data from the U.S. Geological Survey cites 57,000 (onshore and offshore) wind turbines in the United States.The forecasting method can be divided into three types: short-term (up to 1 h), medium-term (up to 1 week), and long-term (1 week to a year or more) [14].Wind flow can influence the performance of both onshore and offshore turbines [15].The performance coefficient method for wind tunnel analysis was initially presented by [16].In addition, a data analysis framework was developed to effectively analyze the data collected from the supervisory control and data acquisition system, incorporating a variant of recurrent neural networks known as long short-term memory [17].Five parametric models were tested to evaluate wind turbine performance and the optimal model, identified as the Frank copula, was deemed suitable for testing [18].Moreover, a comparative assessment of various intricate algorithms was conducted to ascertain their competence in handling these data sets [19].The persistence method is a forecasting technique grounded in the assumption that the wind speed observed at a specific moment will be the same in the future [20].As the forecasting time scale increases, the accuracy of the resistance method notably diminishes [21].The physical method leverages lower atmospheric observations or numerical weather prediction (NWP), and involves utilizing comprehensive weather forecast data that encompasses crucial parameters like temperature, pressure, surface roughness, and obstacles [22].A statistical approach, in utilizing an autoregressive (AR) model and independent component analysis, demonstrates notably high accuracy [23].The hybrid approach for wind speed forecasting, in relying on exponential adjustment [24], integrates a backpropagation neural network with a technique aimed at mitigating seasonal effects in accurate wind speed data.The Autoregressive Moving Average model can be employed in wind speed forecasting, and particularly for medium-term predictions [25].Wind farm development can be impacted without determining the wind speed at a potential given location [26].
The aim of this study is to focus on predicting direct normal irradiance (DNI), diffuse horizontal irradiance (DHI), and wind speed.These exhibit periodic or quasi-periodic properties, allowing them to be represented as linear combinations of smooth periodic functions, such as sines and cosines.A machine learning approach was introduced to achieve increased accuracy and efficiency in predicting data when confronted by insufficient or malfunctioning measurement instruments.A neural network approach could be employed for wind speed signal prediction, leveraging the principles of the Fourier series and incorporating local adaptation [27].However, this paper considers the entire dataset to generate the Fourier series coefficients, enabling the extrapolation of smooth components for solar radiation and wind speed over time.
This paper is distinguished from existing models by the fact that it accurately predicts wind speed and solar radiation data in specific conditions while maintaining low operational costs.The Fourier network effectively illustrates the signal and simplifies the prediction process.In addition, this approach is highly efficient in capturing and forecasting behavior and rapidly converges on an optimal solution.In spite of this, the long short-term memory (LSTM) method is better suited to issues involving gradients or overfitting.Utilizing the Fourier method makes it possible to achieve high accuracy, even with limited data.
The rest of this paper is structured as follows: Section introduces the model site description and data collection.Section 3 outlines the regression-based Fourier model and parameter estimation.Section 4 provides the Results and Discussions.And Section 5 concludes the paper.

Model Site Description and Data Collection
To validate the accuracy of the proposed Fourier neural network method, we consider the case of the city of Midland, TX, positioned at a latitude of 31.9974• N and a longitude of 102.0779 • W, as shown in Figure 1.Texas, renowned for its abundant solar and wind potential across all seasons, is a good location for this evaluation.The dataset used for the validation and training phases in this analysis was sourced from the National Renewable Energy Laboratory (NREL) website [28].The comprehensive dataset from the NREL is the foundational source of information for this study, and its solar and wind data provides a reliable basis for model development and evaluation.wind potential across all seasons, is a good location for this evaluation.The dataset used for the validation and training phases in this analysis was sourced from the National Renewable Energy Laboratory (NREL) website [28].The comprehensive dataset from the NREL is the foundational source of information for this study, and its solar and wind data provides a reliable basis for model development and evaluation.

Regression-Based Fourier Model Formulation
Let   be the time-varying signal to be predicted, which is assumed to be quasiperiodic with fundamental frequency  in radians per time units, for  ∈ 0,  the fundamental period, and  the time duration, with both being given in suitable time units.The fundamental frequency is expressed in Equation (1).

𝜔 2𝜋 𝑇
(1) In addition, the signal is sampled at every ℎ time increment, so that the whole signal   is described by the vector  ∈ ℝ that contains the  data points of the given signal, as shown in Equation (2).
The signal at the instant  ℎ is approximated, or predicted, by the truncated Fourier series expressed in Equation (3): where  and  are the unknown constant coefficients to be determined, and  is a constant term, such that   remains smaller than the Nyquist frequency expressed in Equation ( 4):

Regression-Based Fourier Model Formulation
Let y(t) be the time-varying signal to be predicted, which is assumed to be quasiperiodic with fundamental frequency ω 0 in radians per time units, for T ∈ (0, T d ] the fundamental period, and T d the time duration, with both being given in suitable time units.The fundamental frequency is expressed in Equation (1).
In addition, the signal is sampled at every h time increment, so that the whole signal y(t) is described by the vector Y ∈ R N that contains the N data points of the given signal, as shown in Equation (2).
The signal at the instant t = kh is approximated, or predicted, by the truncated Fourier series expressed in Equation (3): where a i and b i are the unknown constant coefficients to be determined, and M is a constant term, such that ω M = Mω 0 remains smaller than the Nyquist frequency expressed in Equation ( 4): A more concise notation is allowed if one defines the vectors as shown in Equation ( 5): Φ k = 1, cos(ω 0 kh), cos (2ω 0 kh), . . . ,sin(ω 0 kh), sin (2ω 0 kh), . . .] T (6) Thus, the result is in the following Equation (7): It can be condensed in a matrix-vector product, as shown in Equation ( 8).
where Φ ∈ R (2M+1)×N is the regressor matrix, whose k-th column is Φ k .The coefficients can be found in Equation ( 9) by using the damped pseudo-inverse matrix.
If there is a sufficiently small positive ε; as when the regressor matrix Φ is full-row rank and ε = 0, it is established that ΦΦ # = I.Then, the coefficients are computed as Equation (10).
The proposed approach then consists of using these same coefficients to estimate the (overall and smooth) behavior of the solar intensity and wind speed, which will make it possible to decide when to activate one or both energy capture systems.
RMSE has been used to measure the accuracy of a predictive model by calculating the square root of the average of squared differences between predicted and actual values, as shown in Equation (11).
The correlation coefficient measures the strength and direction of a linear relationship between two variables.Two variables, A and B, represent their data points as A i and B i .The correlation coefficient (r) between these two variables is calculated by using the formula Equation (12).
The function builds a regressor matrix "phi" on the basis of Fourier series expansion of the input signals.The expansion therefore represents the signal linear variety of Sin and Cos functions with various frequencies.By doing this, the Fourier series expansion gives the function the ability to capture the input signal's predicted behavior and frequency.The next step is to estimate the parameter "W" by applying an ordinary equation.These parameters describe the weights aligned with each Fourier series sinusoidal component, and these weights help the function models operate between the frequency components and the corresponding time domain values.As long as "W" is estimated, the function builds a regressor matrix for forecasting future values.In addition, using this regressor matrix and learned parameters can help to predict the future signal in the time domain.

General Model Description
Electricity plays a significant role in both residential and commercial buildings, with the residual sector accounting for 44% of total electrical consumption [30].At present, the grid is a mix of various energy sources, such as natural gas, solar, wind, and nuclear energy.In order to achieve a net zero carbon emission goal, there is a need to decarbonize and electrify all residential and commercial buildings.Researchers therefore need to consider the available infrastructure and focus on the number of wind turbines and solar PVs in order to meet the target shown in Figure 2.
builds a regressor matrix for forecasting future values.In addition, using this regressor matrix and learned parameters can help to predict the future signal in the time domain.

General Model Description
Electricity plays a significant role in both residential and commercial buildings, with the residual sector accounting for 44% of total electrical consumption [30].At present, the grid is a mix of various energy sources, such as natural gas, solar, wind, and nuclear energy.In order to achieve a net zero carbon emission goal, there is a need to decarbonize and electrify all residential and commercial buildings.Researchers therefore need to consider the available infrastructure and focus on the number of wind turbines and solar PVs in order to meet the target shown in Figure 2.  Continual adjustments are made on the basis of the statistical analysis to optimize the model for enhanced accuracy.This hierarchical approach guarantees a methodical process for constructing, training, and assessing the predictive model.Ultimately the goal is to improve its accuracy and applicability in real-world meteorological forecasting, as depicted in Figure 3. Ultimately the goal is to improve its accuracy and applicability in real-world meteorological forecasting, as depicted in Figure 3.The structure of the Fourier series-based network is shown in Figure 4.For each time index, when the sampling time is known, the data is predicted as a linear combination of sines and cosines.This is a linear combination of the functions  • , where the coefficients for such linear combination use both the measure data (training set) and the given The structure of the Fourier series-based network is shown in Figure 4.For each time index, when the sampling time is known, the data is predicted as a linear combination of sines and cosines.This is a linear combination of the functions φ i (•), where the coefficients for such linear combination use both the measure data (training set) and the given approximation functions.After the training phase, these coefficients are considered to forecast solar irradiance and wind speed for decision-making purposes.
approximation functions.After the training phase, these coefficients are considered to forecast solar irradiance and wind speed for decision-making purposes.

Results and Discussions
In designing a renewable energy system, it is necessary to calculate the required number of solar panels or wind turbines.Having an incomplete data set for wind speed can therefore affect the techno-economic analysis, although it should also be acknowledged that the number of turbines is determined on the basis of the wind speed in the needed area.Conversely, solar PV design requires the DNI and DHI, which are two parameters that are key to finding the global horizontal irradiance (GHI).These three parameters show how much solar radiation can reflect on the PV panel.
In this study, the Fourier network regression model shows its proficiency in predicting key meteorological variables (DHI, DNI, and wind speed) across the entire 8760 h duration of the year.The visual representation in Figures 5 and 6 emphasized the model's accuracy in forecasting DHI and DNI, showing a good alignment between the predicted and observed data points that highlighted its ability to effectively capture solar radiation patterns.

Results and Discussions
In designing a renewable energy system, it is necessary to calculate the required number of solar panels or wind turbines.Having an incomplete data set for wind speed can therefore affect the techno-economic analysis, although it should also be acknowledged that the number of turbines is determined on the basis of the wind speed in the needed area.Conversely, solar PV design requires the DNI and DHI, which are two parameters that are key to finding the global horizontal irradiance (GHI).These three parameters show how much solar radiation can reflect on the PV panel.
In this study, the Fourier network regression model shows its proficiency in predicting key meteorological variables (DHI, DNI, and wind speed) across the entire 8760 h duration of the year.The visual representation in Figures 5 and 6 emphasized the model's accuracy in forecasting DHI and DNI, showing a good alignment between the predicted and observed data points that highlighted its ability to effectively capture solar radiation patterns.In zooming in on the DHI and DNI, Figures 7 and 8        The collective success observed across meteorological parameters in Figures 5-10 highlights the adaptability of the Fourier network regression model, and the results position the model as a valuable tool for renewable energy.Forecast provides nuanced insights that can be used to optimize energy systems and support informed decision-making.
Figure 11 displays the magnitude spectrum, representing the amplitude of components at specific frequencies, scaled by multiples of the fundamental frequency.With a fundamental frequency set at one event per year, the results reveal pronounced fluctuations that align with sun activity, exhibiting variations throughout the day and night, and vice versa.The collective success observed across meteorological parameters in Figures 5-10 highlights the adaptability of the Fourier network regression model, and the results position the model as a valuable tool for renewable energy.Forecast provides nuanced insights that can be used to optimize energy systems and support informed decision-making.
Figure 11 displays the magnitude spectrum, representing the amplitude of components at specific frequencies, scaled by multiples of the fundamental frequency.With a fundamental frequency set at one event per year, the results reveal pronounced fluctuations that align with sun activity, exhibiting variations throughout the day and night, and vice versa.The collective success observed across meteorological parameters in Figures 5-10 highlights the adaptability of the Fourier network regression model, and the results position the model as a valuable tool for renewable energy.Forecast provides nuanced insights that can be used to optimize energy systems and support informed decision-making.
Figure 11 displays the magnitude spectrum, representing the amplitude of components at specific frequencies, scaled by multiples of the fundamental frequency.With a fundamental frequency set at one event per year, the results reveal pronounced fluctuations that align with sun activity, exhibiting variations throughout the day and night, and vice versa.
The phase behavior in Figure 12 fluctuates due to factors like noise, fundamental frequency uncertainties, and non-integer multiples frequency components, making phase inference challenging.However, addressing the ensuing complexity is beyond the scope of this paper.The phase behavior in Figure 12 fluctuates due to factors like noise, fundamental frequency uncertainties, and non-integer multiples frequency components, making phase inference challenging.However, addressing the ensuing complexity is beyond the scope of this paper.The residual figures for both DHI and DNI show slight differences, which are commonly referred to as "noise," and this is particularly noticeable within the middle segment of the dataset.Despite these minor variations, it is important to note the overall performance of the Fourier network regression model remains commendable, underscoring its capacity to accurately predict solar radiation across diverse conditions .In the context of these residual figures, "noise" signifies the slight differences between the model's predictions and the actual observed values.The numerical range of the residuals indicates the discrepancies are of relatively small magnitude.A thorough assessment of the data within a specific range is recommended to further refine the model's predictive capabilities .Detailed analysis aims to identify conditions or factors contributing to the observed "noise", facilitating precise adjustments of the model parameters.In summary, the minor "noise" in the residuals poses a manageable challenge that can be strategically addressed by focused model refinement.The broader context suggests the model accurately predicts DHI and DNI across most of the dataset.Strategic adjustments based on the detailed analysis of the middle portion of the data can contribute to an even more refined and precise forecasting model for solar irradiance-Figures 13-15 shows residuals for DHI, DNI, and wind speed.The phase behavior in Figure 12 fluctuates due to factors like noise, fundamental frequency uncertainties, and non-integer multiples frequency components, making phase inference challenging.However, addressing the ensuing complexity is beyond the scope of this paper.The residual figures for both DHI and DNI show slight differences, which are commonly referred to as "noise," and this is particularly noticeable within the middle segment of the dataset.Despite these minor variations, it is important to note the overall performance of the Fourier network regression model remains commendable, underscoring its capacity to accurately predict solar radiation across diverse conditions .In the context of these residual figures, "noise" signifies the slight differences between the model's predictions and the actual observed values.The numerical range of the residuals indicates the discrepancies are of relatively small magnitude.A thorough assessment of the data within a specific range is recommended to further refine the model's predictive capabilities .Detailed analysis aims to identify conditions or factors contributing to the observed "noise", facilitating precise adjustments of the model parameters.In summary, the minor "noise" in the residuals poses a manageable challenge that can be strategically addressed by focused model refinement.The broader context suggests the model accurately predicts DHI and DNI across most of the dataset.Strategic adjustments based on the detailed analysis of the middle portion of the data can contribute to an even more refined and precise forecasting model for solar irradiance-Figures 13-15 shows residuals for DHI, DNI, and wind speed.The residual figures for both DHI and DNI show slight differences, which are commonly referred to as "noise," and this is particularly noticeable within the middle segment of the dataset.Despite these minor variations, it is important to note the overall performance of the Fourier network regression model remains commendable, underscoring its capacity to accurately predict solar radiation across diverse conditions.In the context of these residual figures, "noise" signifies the slight differences between the model's predictions and the actual observed values.The numerical range of the residuals indicates the discrepancies are of relatively small magnitude.A thorough assessment of the data within a specific range is recommended to further refine the model's predictive capabilities.Detailed analysis aims to identify conditions or factors contributing to the observed "noise", facilitating precise adjustments of the model parameters.In summary, the minor "noise" in the residuals poses a manageable challenge that can be strategically addressed by focused model refinement.The broader context suggests the model accurately predicts DHI and DNI across most of the dataset.Strategic adjustments based on the detailed analysis of the middle portion of the data can contribute to an even more refined and precise forecasting model for solar irradiance-Figures 13-15 shows residuals for DHI, DNI, and wind speed.The histograms of the residuals for the DHI, DNI, and wind speed reveal distinctive patterns in the distribution of the model's prediction errors.In the case of DHI (Figure 16), the histogram skews to the left, indicating a concentration of residuals around lower values, with the highest peak centered around or near the zero axis.This suggests the model tends to slightly overestimate the DHI .The predominance of values closer to zero, meanwhile, emphasizes the model's generally accurate predictions of minor discrepancies.The histograms of the residuals for the DHI, DNI, and wind speed reveal distinctive patterns in the distribution of the model's prediction errors.In the case of DHI (Figure 16), the histogram skews to the left, indicating a concentration of residuals around lower values, with the highest peak centered around or near the zero axis.This suggests the model tends to slightly overestimate the DHI .The predominance of values closer to zero, meanwhile, emphasizes the model's generally accurate predictions of minor discrepancies.The histograms of the residuals for the DHI, DNI, and wind speed reveal distinctive patterns in the distribution of the model's prediction errors.In the case of DHI (Figure 16), the histogram skews to the left, indicating a concentration of residuals around lower values, with the highest peak centered around or near the zero axis.This suggests the model tends to slightly overestimate the DHI .The predominance of values closer to zero, meanwhile, emphasizes the model's generally accurate predictions of minor discrepancies.In contrast, the DNI histogram (Figure 17) displays a broader distribution with a symmetrical shape, and is centered on the zero axis.The distribution shows a balanced spread of residuals, indicating the model's predictions of the DNI include a mixture of overestimations and underestimations.The symmetrical pattern implies a well-distributed range of errors.The wind speed histogram (Figure 18) has a unique form with a single line at zero; in emphasizing t, the model tends to have minimal discrepancies, especially around the zero axis.This suggests a high level of accuracy in predicting wind speed, with deviations from the actual observations being notably minor.Despite the small values on the x-axis, visualizations effectively communicate the nuanced distribution of residuals for each parameter.The concentration of values around zero underscores the model's precision, and deviations are minor when considered in the wider context of the scale of the data.Hereafter, the insights provide a foundation for further refinements that will help to ensure the model aligns closely with observed values across the spectrum.In contrast, the DNI histogram (Figure 17) displays a broader distribution with a symmetrical shape, and is centered on the zero axis.The distribution shows a balanced spread of residuals, indicating the model's predictions of the DNI include a mixture of overestimations and underestimations.In contrast, the DNI histogram (Figure 17) displays a broader distribution with a symmetrical shape, and is centered on the zero axis.The distribution shows a balanced spread of residuals, indicating the model's predictions of the DNI include a mixture of overestimations and underestimations.The symmetrical pattern implies a well-distributed range of errors.The wind speed histogram (Figure 18) has a unique form with a single line at zero; in emphasizing t, the model tends to have minimal discrepancies, especially around the zero axis.This suggests a high level of accuracy in predicting wind speed, with deviations from the actual observations being notably minor.Despite the small values on the x-axis, visualizations effectively communicate the nuanced distribution of residuals for each parameter.The concentration of values around zero underscores the model's precision, and deviations are minor when considered in the wider context of the scale of the data.Hereafter, the insights provide a foundation for further refinements that will help to ensure the model aligns closely with observed values across the spectrum.The symmetrical pattern implies a well-distributed range of errors.The wind speed histogram (Figure 18) has a unique form with a single line at zero; in emphasizing t, the model tends to have minimal discrepancies, especially around the zero axis.This suggests a high level of accuracy in predicting wind speed, with deviations from the actual observations being notably minor.Despite the small values on the x-axis, visualizations effectively communicate the nuanced distribution of residuals for each parameter.The concentration of values around zero underscores the model's precision, and deviations are minor when considered in the wider context of the scale of the data.Hereafter, the insights provide a foundation for further refinements that will help to ensure the model aligns closely with observed values across the spectrum.
RMSE is a common metric used to measure errors, whose application to energy data is highly recommended [31].The RMSE values for the wind speed, DNI, and DHI quantitatively assess the model's performance in predicting these meteorological parameters.The RMSE is 0.0007555, indicating a relatively low error in the model's predictions, as shown in Figure 19.Overall, the low RMSE values across wind speed, DNI, and DHI indicate that the Fourier network regression model's prediction of these meteorological parameters is highly effective and reliable.The model's performance supports its utility in renewable energy forecasting and meteorological analysis applications, as its small RMSE value affirms.RMSE is a common metric used to measure errors, whose application to energy data is highly recommended [31].The RMSE values for the wind speed, DNI, and DHI quantitatively assess the model's performance in predicting these meteorological parameters.The RMSE is 0.0007555, indicating a relatively low error in the model's predictions, as shown in Figure 19.Overall, the low RMSE values across wind speed, DNI, and DHI indicate that the Fourier network regression model's prediction of these meteorological parameters is highly effective and reliable .The model's performance supports its utility in renewable energy forecasting and meteorological analysis applications, as its small RMSE value affirms.RMSE is a common metric used to measure errors, whose application to energy data is highly recommended [31].The RMSE values for the wind speed, DNI, and DHI quantitatively assess the model's performance in predicting these meteorological parameters.The RMSE is 0.0007555, indicating a relatively low error in the model's predictions, as shown in Figure 19.Overall, the low RMSE values across wind speed, DNI, and DHI indicate that the Fourier network regression model's prediction of these meteorological parameters is highly effective and reliable .The model's performance supports its utility in renewable energy forecasting and meteorological analysis applications, as its small RMSE value affirms.

Conclusions
A Fourier network regression model was implemented to examine solar intensity and wind speed data, and it demonstrated impressive accuracy in predicting and recovering data.Validation of the model was conducted using NREL data and statistical techniques, affirming its capability to optimize energy system configurations.The proposed hierarchical approach encompassed site selection, data collection, and neural network development, producing outcomes that underscored the model's dependability, including minimal RMSE values.Residual analysis identified minor discrepancies, offering insights for potential future enhancements.In summary, the Fourier network regression model emerges as an asset for forecasting renewable energy data that will facilitate sustainable energy systems design.

Figure 2 .
Figure 2. Integrating Solar and Wind Power Into the Existing Electric Grid.The hierarchical methodology employed for predicting the DNI, DHI, and wind speed follows a systematic approach to ensure precise and effective forecasting.The initial step involves meticulously choosing the geographical site for forecasting meteorological data, while taking into account the distinct patterns observed in different locations.Once the site is identified, the subsequent phase involves amassing comprehensive data for wind speed, DNI, and DHI, and doing the groundwork for training, validating, and testing the predictive model.The gathered data then undergoes preprocessing to cleanse and organize it efficiently, addressing missing values, normalizing variables, and preparing the dataset for input into the prediction model.Subsequently, the dataset is partitioned into training, validation, and testing sets, with the training set used for model training, the validation set used to aid the fine-tuning of parameters, and the testing set used to evaluate the model's unseen data performance.Hierarchical neural network architectures are then crafted for predicting wind speed, DNI, and DHI, which involves the development of distinct networks for each parameter, while ensuring connectivity for efficient information transfer.The model undergoes training using a training dataset, with adjustments iteratively made to weights and biases to minimize prediction errors and enhance the dataset's ability to capture intricate relationships within the data.After training, the model predicts future values of wind speed, DNI, and DHI by inputting new or unseen data for the selected geographical site.A comprehensive statistical analysis follows forecasting to evaluate the efficiency and accuracy of the model, calculating metrics such as RMSE and correlation coefficients.Continual adjustments are made on the basis of the statistical analysis to optimize the model for enhanced accuracy.This hierarchical approach guarantees a methodical process for constructing, training, and assessing the predictive model.

Figure 2 .
Figure 2. Integrating Solar and Wind Power Into the Existing Electric Grid.The hierarchical methodology employed for predicting the DNI, DHI, and wind speed follows a systematic approach to ensure precise and effective forecasting.The initial step involves meticulously choosing the geographical site for forecasting meteorological data, while taking into account the distinct patterns observed in different locations.Once the site is identified, the subsequent phase involves amassing comprehensive data for wind speed, DNI, and DHI, and doing the groundwork for training, validating, and testing the predictive model.The gathered data then undergoes preprocessing to cleanse and organize it efficiently, addressing missing values, normalizing variables, and preparing the dataset for input into the prediction model.Subsequently, the dataset is partitioned into training, validation, and testing sets, with the training set used for model training, the validation set used to aid the fine-tuning of parameters, and the testing set used to evaluate the model's unseen data performance.Hierarchical neural network architectures are then crafted for predicting wind speed, DNI, and DHI, which involves the development of distinct networks for each parameter, while ensuring connectivity for efficient information transfer.The model undergoes training using a training dataset, with adjustments iteratively made to weights and biases to minimize prediction errors and enhance the dataset's ability to capture intricate relationships within the data.After training, the model predicts future values of wind speed, DNI, and DHI by inputting new or unseen data for the selected geographical site.A comprehensive statistical analysis follows forecasting to evaluate the efficiency and accuracy of the model, calculating metrics such as RMSE and correlation coefficients.Continual adjustments are made on the basis of the statistical analysis to optimize the model for enhanced accuracy.This hierarchical approach guarantees a methodical process for constructing, training, and assessing the predictive model.Ultimately the goal is to improve its accuracy and applicability in real-world meteorological forecasting, as depicted in Figure3.

Figure 3 .
Figure 3.A Hierarchical Methodology for Predicting DNI, DHI, and Wind Speed.

Figure 3 .
Figure 3.A Hierarchical Methodology for Predicting DNI, DHI, and Wind Speed.

Figure 5 .
Figure 5. Original DHI versus Forecasted DHI.Figure 5. Original DHI versus Forecasted DHI.In zooming in on the DHI and DNI, Figures 7 and 8 provided a detailed examination of the model's performance in replicating the nuances of horizontal solar irradiance.The close correspondence between the predicted and actual DHI and DNI values underscored the model's ability to capture the subtleties of this specific meteorological parameter.
provided a detailed examination of the model's performance in replicating the nuances of horizontal solar irradiance.The close correspondence between the predicted and actual DHI and DNI values underscored the model's ability to capture the subtleties of this specific meteorological parameter.

Figure 8 .
Figure 8. Zoomed-in Original DNI versus Forecasted DNI.The analysis was expanded to include wind speed predictions.Figures 9 and 10 offered insights into the model's effectiveness in anticipating wind patterns.Visual comparison revealed a commendable accuracy in predicting wind speed variations, further reinforcing the model's reliability in handling diverse meteorological phenomena.

Figure 8 .
Figure 8. Zoomed-in Original DNI versus Forecasted DNI.The analysis was expanded to include wind speed predictions.Figures 9 and 10 offered insights into the model's effectiveness in anticipating wind patterns.Visual comparison revealed a commendable accuracy in predicting wind speed variations, further reinforcing the model's reliability in handling diverse meteorological phenomena.

Figure 8 . 18 Figure 9 .
Figure 8. Zoomed-in Original DNI versus Forecasted DNI.The analysis was expanded to include wind speed predictions.Figures 9 and 10 offered insights into the model's effectiveness in anticipating wind patterns.Visual comparison

Figure 10 .
Figure 10.Zoomed-In Original Wind Speed versus Forecasted Wind Speed.

Figure 10 .
Figure 10.Zoomed-In Original Wind Speed versus Forecasted Wind Speed.

Figure 10 .
Figure 10.Zoomed-In Original Wind Speed versus Forecasted Wind Speed.

Figure 15 .
Figure 15.Wind Speed Residuals.The histograms of the residuals for the DHI, DNI, and wind speed reveal distinctive patterns in the distribution of the model's prediction errors.In the case of DHI (Figure16), the histogram skews to the left, indicating a concentration of residuals around lower values, with the highest peak centered around or near the zero axis.This suggests the model tends to slightly overestimate the DHI.The predominance of values closer to zero, meanwhile, emphasizes the model's generally accurate predictions of minor discrepancies.

Figure 19 .
Figure 19.RMSE with Different Adjustment.The correlation values of one model indicate a perfect positive linear relationship between the model predictions and the actual observed values for each respective meteorological parameter.Ideal correlation suggests the model accurately captures the variations and trends in wind speed, DNI, and DHI, and also that the predicted values are directly proportional to the observed values.In addition, the correlation values of one model show the Fourier network regression model's prediction of the three parameters is both accurate and robust.