Polyphasic Characterization of Four Aspergillus Species as Potential Biocontrol Agents for White Mold Disease of Bean

The genus Aspergillus comprises several species that play pivotal roles in agriculture. Herein, we morphologically and physiologically characterized four genetically distinct Aspergillus spp., namely A. japonicus, A. niger, A. flavus, and A. pseudoelegans, and examined their ability to suppress the white mold disease of bean caused by Sclerotinia sclerotiorum in vitro and under greenhouse conditions. Seriation type of Aspergillus spp. correlates with conidiospores discharge as detected on the Petri glass lid. Members of Nigri section cover their conidial heads with hard shells after prolonged incubation. In addition, sporulation of the tested Aspergillus isolates is temperature sensitive as it becomes inhibited at low temperatures and the colonies become white. Examined Aspergillus spp. were neither infectious to legumes nor aflatoxigenic as confirmed by HPLC except for A. flavus and A. pseudoelegans which, secreted 5 and 1 ppm of aflatoxin B1, respectively. Co-inoculations of Sclerotinia’s mycelium or sclerotia with a spore suspension of Aspergillus spp. inhibited their germination on PDA at 18 °C and 28 °C, and halted disease onset on detached common bean and soybean leaves. Similarly, plants treated with A. japonicus and A. niger showed the highest survival rates compared to untreated plants. In conclusion, black Aspergillus spp. are efficient biocides and safe alternatives for the management of plant diseases, particularly in organic farms.


Introduction
The white mold pathogen, Sclerotinia sclerotiorum (Lib.) de Bary, infects a wide range of plants causing serious economic losses in yield and crop quality [1][2][3][4][5]. More than 600 host plants are subjected to attack by such necrotrophic pathogens [2,4,6]. Members of the Leguminosae family including common bean and soybean are among the heavily damaged hosts by S. sclerotiorum [1,2,5,[7][8][9]. Initial infections occur via ascospores liberated from fully developed apothecia [3,10]. Symptomatic plants exhibit water-soaked lesions throughout the canopy covered by white fluffy mycelium under humid conditions. Black amorphous sclerotia are then formed among the woven mycelial mats on and in the host canopy [11]. The melanized rind of sclerotia provides protection against adverse environmental conditions including heat, drought, and hydrolytic enzymes [12][13][14]. Melanized sclerotia aid for over-wintering and initial propagation by generating new progeny of ascospores after carpogenic germination.
The pathogenic capability of S. sclerotiorum relies on several physical and biochemical factors including compound appressoria, cell-wall degrading enzymes (CWDEs), oxalic acid, and isothiocyanate hydrolase [4,6,15]. Such complexity made it difficult to breed for resistance against this necrotrophic plant pathogen [4]. In addition, the resistibility of Sclerotinia's resting structures increases the pathogen longevity and renders management strategies unreliable. Fortunately, biological control strategies using Coniothyrium minitans and Sporidesmium sclerotivorum bioagents have provided efficient solutions for such aggressive pathogens due to their mycoparasitic capability for the pathogen's sclerotia [16,17].
The genus Aspergillus comprises versatile species of different morphological, biological, and ecological characters. Species of Aspergillus are widespread throughout the agricultural environment, growing in soil, decaying organic matter, plants, and animals. The diversity of Aspergillus species is correlated with their ability to utilize a wide variety of organic substrates and adapt well to a broad range of environmental conditions [38]. A. niger, for example, is a common soil fungus that can live in different types of soils across a pH range from a highly acidic to a strongly alkaline environment [39]. Similarly, A. japonicus is found in soil and has also been known to adapt to agricultural environments and farmed animals [40]. The positive contribution of Aspergillus species is not limited to their antagonistic potential. Numerous members of Aspergillus are plant endophytes as they concomitantly live within their host plants in a symbiotic relationship. The symbiont Aspergillus partner provides growth promotion for the host plants and protection against a wide array of plant pathogens [41][42][43][44]. Other members of Aspergillus spp. serve as bio-remediators for the agricultural environment by reverting hazardous chemical compounds into environmentally benign forms and minimizing the accumulation of heavy metals [45][46][47][48]. Several Aspergillus spp. have economic value for mass production of lipids, proteins, enzymes refined organic acids [49][50][51]. Therefore, Aspergillus is an important genus that comprises significantly valuable species with direct and indirect benefits to agriculture and industry.
This work was established to evaluate the biocontrol potential for diverse species of Aspergillus on white mold disease of legumes caused by S. sclerotiorum under lab and greenhouse conditions. The examined species were genetically identified, and their organic acid profile was characterized in our previous work [37]. As a continuation, the morphological, microscopic, mycotoxigenic, and pathological attributes were characterized as well to demonstrate variability among tested species. In addition, the biocontrol potential of Aspergillus spp. was demonstrated in vitro, and on white mold-infected bean under greenhouse conditions.

Fungal Isolates and Plant Materials
Four Aspergillus spp. were previously isolated and genetically identified based on internal transcribed spacer (ITS) and beta-tubulin partial sequences [37]. Sclerotinia sclerotiorum was previously isolated from common bean plants exhibiting typical symptoms of white rot disease and maintained on PDA (Difco, Sparks, MD, USA) medium. Air-dried sclerotia were stored at −20 • C for long-term storage.
Common bean (Phaseolus vulgaris cv. Giza 6), soybean (Glycine max [L.] Merr. cv. Giza22), cowpea (Vigna unguiculata cv. Dokki7), and tobacco (Nicotiana benthamiana) plants were grown in the greenhouse under natural sunlight at a temperature range of 20-26 • C. Leaves were excised from two-month-old plants and used for the inoculation test.

Morphological Characterization of Aspergillus Isolates
Characterization procedures were carried out based on methods recommended by [52][53][54][55]. Spores suspension of Aspergillus spp. was prepared and adjusted to 10 6 cfu/mL −1 as previously shown [37,56]. Spore suspension of each fungal isolate was used for three-point inoculation on MEA (Oxoid, Basingstoke, Hampshire, England) and PDA. Fungal isolates were incubated at 28 • C for seven days in the dark. Morphological characters of fungal colonies were the basis of discrimination among the isolates. Sclerotial production was examined by the naked eye and using an Olympus SZ61 Stereo Microscope 0.67-4.5×, Tokyo, Japan. The possible production of cleistothecia was tested on PDA and MEA after six weeks of inoculation using microscopy as well. Fungal specimens were mounted in lactic acid 60% and stained with lactophenol cotton blue for microscopy. Ethanol was used for mounting to prevent air bubbles and remove excessive conidia. Microscopic observations and digital imaging for fungal spores and spore-bearing structures were performed using a Leica DM500 compound microscope outfitted with an ICC50 HD camera and Leica LAS EZ software version 2.0.0, Morrisville, NC, USA. A scale bar was added, and fungal dimensions were measured using ImageJ software [57]. The number of replicates is shown in Table 1. Petri dishes containing Aspergillus isolates were further incubated for two more weeks to study the fungal spore dissemination, and glass lids were photographed. Aspergillus isolates were also inoculated into two sets of 250 mL Erlenmeyer flasks containing 100 mL of malt extract broth (MEB, pH 5.4) and potato dextrose broth (PDB, pH 5.6) and incubated on a rotary shaker (180 rpm) at 28 • C for seven days in the dark. Culture filtrates were further used for the evaluation of mycotoxins using HPLC. Digital photography for Petri dishes and Erlenmeyer flasks was performed using a Canon EOS 550D digital camera equipped with a Canon 18-55 mm zoom lens. The collected data were recorded in five consecutive trials with three replicates in each at different time points.

Scanning Electron Microscopy (SEM)
Fungal cultures grown on PDA media for 7 days at 28 • C in the dark were used for SEM photography as per [58,59]. A 5 mm square was excised from fungal cultures and immersed into paraformaldehyde (2%) and glutaraldehyde (2.5%) fixative (pH 7.4) at room temperature for two hours for fixation purposes. Samples were then washed thrice, and post-fixed in 1% osmium tetroxide at room temperature for 1 h. Fungal specimens were then washed three times in phosphate buffer (pH 7), vacuum dried, and mounted to the stub. The samples were then coated with gold using a sputter coater. The fungal specimens were examined and photographed using a scanning electron microscope JOEL, JSM-6510LV at 30 kV and a 10 mm working distance at the Electron Microscopy Unit, Mansoura University, Mansoura, Egypt.

Mycotoxin Analysis
For qualitative detection of aflatoxins B and G, Aspergillus isolates were grown on coconut meal agar (CMA) pH 7. Coconut extract broth (CEB) was prepared as described by [60] and 2% agar-agar (Oxoid, Basingstoke, Hampshire, England) was added before autoclaving at 121 • C for 20 min. CMA dishes were incubated at 28 • C for seven days in the dark. Two aflatoxigenic A. flavus isolates secreting aflatoxin B and G were used as positive controls. The aflatoxin-positive isolates were kindly provided by the Central Lab of Residue Analysis of Pesticides and Heavy Metals in Food (QCAP Lab), Dokki, Giza, 12311, Egypt. The aflatoxigenic capability was visually examined under ultraviolet (UV) light at a wavelength of 366 nm in a dark room using a handheld UV lamp UVGL-55 multiband, San Gabriel, CA, USA.
Quantitative analysis was carried out using HPLC with fluorescent detection (Knauer, Germany). A 100 µL spore suspension of each isolate was inoculated in PDB (pH 7.0) and incubated on a rotary shaker (200 rpm) at 28 • C for five days. Cultures were filtered through cheesecloth, 11 µm pore size Whatman filter paper no. 1, and centrifuged at 7000× g for 10 min. Clarified culture filtrates were used to measure the aflatoxins AFB1, AFB2, AFG1, AFG2, and ochratoxin A (OTA). Aflatoxins were separated in an HPLC column (XBridge C18 5 µm 4.6 × 150 mm) with a mobile phase of toluene: ethyl acetate: formic acid: methanol (90:6:2:2, v/v/v) at a flow rate of 1.5 mL min −1 . Aflatoxin retention times and fluorescence detection excitation and emission wavelengths for AFB1, AFB2, AFG1, AFG2, and OTA are presented in Table 1. Calibration curves for each aflatoxin were determined using a series of standard solutions prepared in methanol.

Sequence Analysis
A consensus sequence of ten representative strains from A. japonicus, A. niger, A. flavus, and A. pseudoelegans was predicted using the ClustalW algorithm in SeaView 5.0.5 software [61]. Sequences of Aspergillus isolates used in the present study were included. GenBank IDs for the retracted sequences were previously published by [37]. The consensus sequences were curated, aligned, and edited using BioEdit software [62]. Sequence alignment infers the single nucleotide polymorphisms (SNPs) among A. japonicus, A. niger, A. flavus, and A. pseudoelegans.

Biocontrol Assays
The biocontrol potential of Aspergillus isolates on the mycelial growth of S. sclerotiorum was evaluated in vitro using the dual culture technique on PDA (pH 5.6). Inoculum of each isolate of Aspergillus and the target pathogen were placed at equal distances from the Petri dish periphery at opposing positions and incubated at 23 • C as an optimal temperature for the pathogen and the bioagent.
To further assess the biocontrol potential of Aspergillus spp. at a wide range of ambient temperatures, freshly propagate mycelial disks of S. sclerotiorum were placed in the center of fresh PDA dishes (pH 5.6). Five microliters from 10 6 cfu/mL −1 Aspergillus spore suspension was placed beneath the mycelial disks. All treatments were repeated using sclerotia of S. sclerotiorum. Both sets of treatments were conducted twice and incubated at 18 • C and 28 • C until S. sclerotiorum growth reached the dish edges in the control treatment. Three replicates were used for each treatment. PDA dishes inoculated with mycelium or sclerotia of S. sclerotiorum were used for control. Data were photographed to present the nature of coexistence between the tested fungi.
For in vivo biocontrol assays on detached leaves, the inoculum of the fungal pathogen was placed on freshly harvested healthy-looking leaves kept in moisten 15 cm Petri dishes under aseptic conditions. Mycelial disks and sclerotia of fresh S. sclerotiorum cultures were used for inoculation purposes. Ten microliters of 1 × 10 6 cfu/mL −1 Aspergillus spore suspension was applied beneath the inoculum of the fungal pathogen. Leaves inoculated with S. sclerotiorum only were used as a positive control, while Aspergillus-inoculated leaves were used as negative controls. Dishes were incubated in a growth chamber at a temperature range of 22-25 • C under a 16/8 h day/night cycle using 60-Watt GE cool white fluorescent bulbs. The mean diameter of the infected zone was measured after one week of incubation, and leaves were photographed.
Two greenhouse experiments were performed at the Faculty of Agriculture, Ash-Sharqiah (GPS coordinates: 30.574947607298547, 31.539601650127825) and Agriculture Re-search Center, Giza governorates (GPS coordinates: 30.02087346472314, 31.20777383638277) in September 2021 to evaluate the biocontrol potential of Aspergillus spp. on white mold disease in a pot experiment. Common bean seeds were dressed with 1 × 10 6 cfu/mL −1 fungal spore suspension at a ratio of 10 µL per seed with the aid of Arabic gum as described in [63]. Seeds were air-dried and stored in a dark dry cabinet for further use. Three seeds were sown in pots filled with peatmoss: vermiculite potting medium pre-infested with 1% of S. sclerotiorum inoculum grown on sorghum seeds. Inoculum preparation and soil infestation was carried out as per [37,64]. Untreated seeds were sown in S. sclerotioruminfested soil and virgin soil to serve as a negative control and mock treatment, respectively. An additional control treatment having bean seeds dressed with 50% iprodione (WP) and sown in S. sclerotiorum-infested soil was included for positive control comparison. Pots were watered and fertilized when needed. Five pots were used for each treatment.
Data were recorded after two months of seed sowing. Plants were visually inspected for the presence of white mold symptoms, and disease incidence (DI) was calculated as the percentage of symptomatic plants within each treatment. The amount of disease severity within each treatment was assessed according to the following scale: 0 = no diseased stem; 1 ≤ 5%; 3 = 6-15%; 5 = 16-30%; 7 = 31-50%; and 9 ≥ 50% [65]. The disease severity index was calculated using the formula: DS = ∑(nv)/NV × 100, where n is the number of treated plants at the rate v, v is the rate of disease as represented in the disease scale, N is the total number of treated plants in each treatment, and V is the highest disease severity rate in the disease scale. Afterward, biocontrol efficiency was calculated using the formula: Control efficacy = (the mean disease index of the control − the mean disease index of a treatment)/the mean disease index of the control × 100%.

Data Analysis
Data were analyzed in a one-way analysis of variance (ANOVA) test and plotted into histograms using GraphPad Prism version 9.3.1 for Windows, GraphPad Software, La Jolla, CA, USA. Post hoc analysis was conducted using Tukey's honestly significant difference (HSD) test for pairwise comparison among treatments. Statistical analysis was performed at a significance level where the alpha value = 0.05 and letters on the bar graph indicate significance between different groups.

Microscopic Features of Aspergillus spp.
A. japonicus formed coffee brown colonies on MEA with 85 mm diameter after seven days of incubation at 28 • C ( Figure 1). The fungus has radiated uniseriate heads with globose to ellipsoidal vesicles ( Figure 2). A. niger colonies were dark brown, and their diameter reached 90 mm after 7 days (Table 2). A. niger heads were biseriate with globose vesicles. The reverse color of both fungi was similar on MEA ( Figure S1). However, the bottom side of A. niger colonies on potato dextrose agar (PDA) medium was pale yellow circled in a white halo of mycelium. A similar observation was noticed on A. niger colonies under UV light ( Figure 3). The reverse color was glowing yellow fluorescent light. Aged cultures of both black Aspergilli formed black rounded shells surrounding their heads after a prolonged period of incubation ( Figure S2). This black rounded structure was frequently observed in A. japonicus cultures while it was very rare in A. niger cultures. This observation reappeared in five consecutive trials. Mean diameters of vesicles and conidia for each tested Aspergillus isolate are represented in Table 3. The variable morphological topology of Aspergillus spores, phialides, and heads was clearly illustrated by scanning electron micrographs ( Figure 2, right panel). Spores of A. japonicus and A. niger were spherically shaped with a rough surface covered with short spikes. Spores of A. niger were born on a biseriate metulae.      A. japonicus formed coffee brown colonies on MEA with 85 mm diameter after seven days of incubation at 28 °C ( Figure 1). The fungus has radiated uniseriate heads with globose to ellipsoidal vesicles ( Figure 2). A. niger colonies were dark brown, and their diameter reached 90 mm after 7 days (Table 2). A. niger heads were biseriate with globose vesicles. The reverse color of both fungi was similar on MEA ( Figure S1). However, the bottom side of A. niger colonies on potato dextrose agar (PDA) medium was pale yellow circled in a white halo of mycelium. A similar observation was noticed on A. niger colonies under UV light ( Figure 3). The reverse color was glowing yellow fluorescent light. Aged cultures of both black Aspergilli formed black rounded shells surrounding their heads after   Table 3. The variable morphological topology of Aspergillus spores, phialides, and heads was clearly illustrated by scanning electron micrographs ( Figure 2, right panel). Spores of A. japonicus and A. niger were spherically shaped with a rough surface covered with short spikes. Spores of A. niger were born on a biseriate metulae.  Colonies of A. flavus and A. pseudoelegans were yellow green and light brown, respectively. A. flavus had uniseriate conidiophores, while A. pseudoelegans heads were biseriate. The mean diameter of A. flavus colonies was 90 mm after 5 days of incubation on MEA, while the diameter of A. pseudoelegans colonies was 50 mm after 7 days (Table 3). Conidial heads of A. flavus were radiate with sub-spherical to ellipsoidal-shaped vesicles, while A. pseudoelegans vesicles were globose. Scanning electron micrographs showed cup-shaped and smooth conidiospores of both A. flavus and A. pseudoelegans born on uniseriate and biseriate phialides, respectively. Macro and micromorphological characters of the examined isolates confirmed their identity and emphasized their variability [52,66,67]. Aspergillus spp. exhibited variable growth rates and temperature preferences.
Noticeably, the uniseriate fungal isolates A. japonicus and A. flavus discharged a dense cloud of spores on the glass lid of Petri dishes while the biseriate isolates, A. niger and A. pseudoelegans, did not ( Figure 1B). Sporulation of all Aspergillus isolates was absent at 18 • C under constant dark conditions (Table 2 and Figure S3). No sclerotia, cleistothecia, fungal exudates, or soluble pigments were visually detected on MEA, PDA cultures, or malt extract broth (MEB) of the tested Aspergillus spp. (Figures 1 and S1), except that the reverse color of A. japonicus had a yellow hue. In addition, potato dextrose broth (PDB) culture inoculated with A. pseudoelegans was orange to light brown at seven days post-incubation (dpi) on a rotary shaker at 180 rpm ( Figure S1C). The growth pattern of Aspergillus spp. was clearly variable on MEB only in terms of colonies' shape and size ( Figure 1C).

Mycotoxin Secretions by Aspergillus spp.
Mycotoxin secretion by Aspergillus spp. was evaluated qualitatively under ultraviolet (UV) light and quantitively by HPLC. Two aflatoxigenic species of A. flavus were used as a control for the qualitative detection of aflatoxin B and G, respectively. No blue or green fluorescent was detected on Aspergillus cultures grown on coconut meal agar (CMA) (Figure 3). Likewise, no aflatoxin or ochratoxin A production was detected by HPLC for the examined isolates except for A. flavus, which produced 5 ppm of aflatoxin B1, and A. pseudoelegans that produced 1 ppm of the same toxin ( Figures 3B, S4 and S5). Plant pathogenic capability of the examined Aspergillus spp. was also examined on detached leaves of common bean, soybean, cowpea, and tobacco. Aspergillus spp. were unable to induce any visual symptoms on plant leaves after two weeks of incubation under humid conditions. Those observations infer that examined Aspergillus species were not plant pathogenic but two of which were aflatoxigenic.

Aspergillus Deteriorates the Mycelium of S. sclerotiorum and Colonizes Its Sclerotia
The ability of Aspergillus spp. to parasitize sclerotia of S. sclerotiorum and prevent its germination was previously confirmed. The inhibitory effect of Aspergillus spp. on Sclerotinia's mycelial growth was examined using dual culture technique. At seven days of inoculation, 5 mm mycelial disks of Aspergillus-infested S. sclerotiorum colonies were transferred to fresh PDA dishes (pH 5.6) and incubated for one week. Mycelium of S. sclerotiorum was unable to grow as Aspergillus spp. purely dominated the entire culture ( Figure 4). No pigments were observed in examined dishes except for A. flavus, which turned the reverse color to orange-brown and decayed the existing mycelium of S. sclerotiorum. To visualize the interaction between Aspergillus and Sclerotinia's mycelia in dual culture, we examined the intermingled region of mycelia microscopically using the slide culture technique. No signs of physical interaction or contact were observed between the two mycelia as they grew at separate levels of the substrate. These results inferred the competition potential of Aspergillus spp. in dual cultures against S. sclerotiorum. oculation, 5 mm mycelial disks of Aspergillus-infested S. sclerotiorum colonies were trans-ferred to fresh PDA dishes (pH 5.6) and incubated for one week. Mycelium of S. sclerotiorum was unable to grow as Aspergillus spp. purely dominated the entire culture ( Figure  4). No pigments were observed in examined dishes except for A. flavus, which turned the reverse color to orange-brown and decayed the existing mycelium of S. sclerotiorum. To visualize the interaction between Aspergillus and Sclerotinia's mycelia in dual culture, we examined the intermingled region of mycelia microscopically using the slide culture technique. No signs of physical interaction or contact were observed between the two mycelia as they grew at separate levels of the substrate. These results inferred the competition potential of Aspergillus spp. in dual cultures against S. sclerotiorum.

Aspergillus spp. Retain Their Biocontrol Potential at a Wide Range of Temperature
The role of temperature on successful interaction between Aspergillus spp. and S. sclerotiorum was studied in vitro. Both fungi were co-inoculated in the center of fresh PDA dishes and incubated at 18 and 28 °C as favored by the pathogen and the potential bioagent, respectively. Growth and reproduction of S. sclerotiorum were observed only in the control treatments where no Aspergillus spp. were inoculated ( Figure 5). Growth and sporulation patterns of A. japonicus, A. niger, and A. pseudoelegans were slightly altered under low temperatures. However, Aspergillus spp. were able to dominate and cover the entire substrate of all other treatments under the examined temperatures and significantly suppress Sclerotinia's growth.

Aspergillus spp. Retain Their Biocontrol Potential at a Wide Range of Temperature
The role of temperature on successful interaction between Aspergillus spp. and S. sclerotiorum was studied in vitro. Both fungi were co-inoculated in the center of fresh PDA dishes and incubated at 18 and 28 • C as favored by the pathogen and the potential bioagent, respectively. Growth and reproduction of S. sclerotiorum were observed only in the control treatments where no Aspergillus spp. were inoculated ( Figure 5). Growth and sporulation patterns of A. japonicus, A. niger, and A. pseudoelegans were slightly altered under low temperatures. However, Aspergillus spp. were able to dominate and cover the entire substrate of all other treatments under the examined temperatures and significantly suppress Sclerotinia's growth.

Aspergillus Suppresses White Mold Disease on Legumes
The ability of Aspergillus spp. to suppress white rot disease in vivo was further assessed on detached leaves of common bean, soybean, and cowpea. The leaves were separately inoculated with mycelial disks and sclerotia of S. sclerotiorum. Typical white mold symptoms were developed on leaves inoculated with S. sclerotiorum alone. Water-soaked lesions started to develop around the inoculation point, then the symptoms rapidly progressed and turned brown as they expand. Infected tissue was covered with a white fluffy mycelium when relative humidity was high. Fungal mycelium turned into black sclerotia after four to five days of symptoms development. No signs of infection were observed on detached leaves co-inoculated with S. sclerotiorum and Aspergillus spp. (Figures 6 and S7, Table 4).
The biocontrol potential of Aspergillus spp. was further evaluated on common bean plants in a pot experiment under greenhouse conditions. Plants treated with A. japonicus and A. niger exhibited significantly lower disease incidence and disease severity percentages than the negative control treatment ( Figure 7A). Plants in the control treatment were able to survive infested soil and develop normal seedlings. However, seedling growth was arrested, and the canopy was smaller than uninoculated plants. Necrotic lesions were eventually developed on the stems of the negative control plants and caused a gradual death. Similarly, A. japonicus and A. niger-treated seeds developed a significantly lower disease severity index compared to the negative control. A. japonicus gave higher protection and less disease incidence than A. niger, but the gap was nonsignificant. The amount of disease protection provided by A. japonicus and A. niger was slightly lower than the chemical fungicide iprodione. The mass of plant canopy/plant vigor in bioagent-treated seeds was bigger than in healthy and fungicide-treated seeds, based on the number of leaves and leaf area, while the number of branches was similar ( Figure 7B, tabulated data not shown).

Aspergillus Suppresses White Mold Disease on Legumes
The ability of Aspergillus spp. to suppress white rot disease in vivo was further assessed on detached leaves of common bean, soybean, and cowpea. The leaves were separately inoculated with mycelial disks and sclerotia of S. sclerotiorum. Typical white mold symptoms were developed on leaves inoculated with S. sclerotiorum alone. Water-soaked lesions started to develop around the inoculation point, then the symptoms rapidly progressed and turned brown as they expand. Infected tissue was covered with a white fluffy mycelium when relative humidity was high. Fungal mycelium turned into black sclerotia after four to five days of symptoms development. No signs of infection were observed on detached leaves co-inoculated with S. sclerotiorum and Aspergillus spp. (Figure 6 Figure 7. Disease incidence (DI) and disease severity (DS) were recorded at two months post seed sowing.   Table 4. Biocontrol efficiency of A. japonicus and A. niger on white mold disease under greenhouse conditions. Statistical analysis is denoted in Figure 7. Disease incidence (DI) and disease severity (DS) were recorded at two months post seed sowing.

DI DS Index Biocontrol Efficiency
A. japonicus 6.

Discussion
White mold disease causes substantial losses to legume crops worldwide [1][2][3][4]. As a necrotrophic pathogen, S. sclerotiorum secretes an arsenal of pathogenicity factors to prepare plant tissue for successful invasion [4]. After invading host tissues, the pathogen gen-

Discussion
White mold disease causes substantial losses to legume crops worldwide [1][2][3][4]. As a necrotrophic pathogen, S. sclerotiorum secretes an arsenal of pathogenicity factors to prepare plant tissue for successful invasion [4]. After invading host tissues, the pathogen generates solid black bodies of uneven shapes called sclerotia for overwintering [3,4,68]. This overwintering stage is known for its ability to survive harsh environmental conditions and remain dormant and viable in soil and plant debris for years. Sclerotia can also survive strong acids, high alkaline solutions, flood, drought, and high soil temperature, as reviewed in [37]. Those facts have rendered several management strategies ineffective against such pathogens. Therefore, integrated management using multiple techniques including biological control offers a better solution to mitigate the disease intensity. Biocontrol seems to be a useful strategy against the resting phase of S. sclerotiorum. Several biocontrol agents deteriorate sclerotia and thus minimize their potential in soil, which in turn decreases disease intensity in fields [16,17,69,70].
Biological control has been used for the management of white mold disease in several crops [18][19][20][21][22]. A. terreus and A. aculeatus effectively reduced Sclerotinia white rot disease [31,32]. In this research, we characterized the biocontrol potential of distantly related Aspergillus spp. against white mold disease to examine whether this phenomenon is conserved among members of the genus Aspergillus. Beforehand, four morphologically distinct species namely A. japonicus, A. niger, A. flavus, and A. violaceofuscus were characterized based on their morphological, microscopic, mycotoxigenic, genetic, and pathological characters. The morphological and physiological attributes of the selected candidates were parallel to their reference strains [66,67,[71][72][73]. Although being opportunistic plant pathogens for onion and some grain crops, the tested A. niger and A. flavus isolates did not cause any signs of disease infection on soybeans and common beans on the leaf assay.
Microscopic observation of Aspergillus cultures revealed the biseriate nature of A. niger and A. pesudoelegans, which is in accordance with [55,73] who illustrated the features of Aspergillus members in sections Nigri and Circumdati. Similarly, the observed uniseriate nature of A. japonicus and A. flavus was previously described by [73] who found that the uniseriate species belong to the A. aculeatus clade, which includes A. japonicus. As per [54], A. flavus and A. subflavus have uniseriate conidiophores. The correlation between conidial discharge and seriation type was clearly observed repeatedly in uniseriate members, which were capable of releasing and accumulating more conidiospores on the glass lid of the Petri dishes. This correlation emphasizes the role of seriation type in conidiospores dispersal for examined isolates of Aspergillus spp. To our knowledge, the roles and reasons behind variable seriation types were not previously inferred.
Notably, the isolates of the Nigri section formed black round shells around some of its conidial heads after four weeks of incubation at 28 • C on PDA, apparently for long-term protection. Those conidia-filled vesicles are precursors for sclerotia, with sclerotia being an essential prerequisite for sexual state development [74,75]. Sclerotial formation at the apex of conidiophore heads was previously reported by [75]. The presence of sclerotia in Aspergillus cultures was previously demonstrated for the homothallic species A. japonicus and the heterothallic species A. niger [75][76][77].
Each of A. japonicus, A. niger, and A. pseudoelegans had radial furrows on MEA but not PDA. This feature was previously reported for members of sections Nigri and Circumdati [55,67]. The reverse color of A. japonicus was pale yellow on PDA. This observation was also reported for several members of section Nigri by [66]. The liquid PDB cultures of A. pseudoelegans become orange to light brown in color, which could be attributed to its ability to produce neoaspergillic acids similar to other members of the same section [55]. Aspergillic acid is yellow colored [78], which could be the cause of color change in the growing broth media. No soluble pigments were observed in examined dishes of Aspergillus spp. grown on solid media except for A. flavus, which turned the reverse color to orange-brown and decayed the existing mycelium of S. sclerotiorum. This observation was not detected in pure liquid or agar cultures of A. flavus, which indicates that the detected secretion was inducible upon biotic stress/competition. kojic acid and aspergillic acids are among the major secretions of A. flavus in growing culture media [79,80]. Both acids are known to possess antifungal and antibacterial activity, which may be responsible for mycelial decay [78,81,82].
The growth rate and sporulation of tested Aspergillus spp. were dramatically affected by darkness, particularly under low ambient temperature. Sporulation of biseriate fungal species, A. niger, and A. pseudoelegans, was more sensitive to light conditions than uniseriate ones. Dark conditions completely halted the sporulation ability of biseriate fungi and delayed it in uniseriate ones. The effect of light on sporulation of Aspergillus spp. was previously demonstrated [83][84][85][86][87][88]. The fungal scaffold protein VeA plays an integral role in signal transduction of environmental cues including light. The VeA protein integrates blue and red-light signals and responds by regulating the asexual and sexual reproductive cycle. VeA accumulates in the nucleus and represses asexual development under dark conditions [89]. Recently, Sun et al. [88] discovered the light-activated transcription factor, RlmA, in A. niger, which is required for the synthesis of melanin, chitin, and exopolysaccharides. Light signaling promotes film production in A. niger, while an absence of light or defective light-activated factors yields abnormal colonies bearing less number of conidiophores [88]. The concentric circle growth of Aspergillus colonies in Figures 5 and 6 was another phenotypic response to dark/light cycles during incubation.
The biocontrol potential of Aspergillus spp. was confirmed through in vitro and in vivo studies. The fungal growth of Aspergillus spp. did not show any signs of competition or antibiosis. However, Aspergillus spp. growth was able to expand through the opponent's fungal colony and concomitantly grow asymmetrically. Presence of Aspergillus spp. growth within the pathogen's colonies significantly suppresses its asexual reproduction and vegetative regeneration. We previously showed that disturbance of ambient oxalic acid concentration suppresses sclerotial formation [37]. In addition, Aspergillus secretions are suppressive to certain fungal plant pathogens including S. sclerotiorum [90][91][92]. Metabolites from Aspergillus capensis culture filtrate namely methyl dichloroasterrate, penicillither, and rosellichalasin showed antifungal activity against S. sclerotiorum, in vitro [93]. Interestingly, Aspergillus spp. were able to maintain their biocontrol potential against S. sclerotiorum, in vitro, even at unfavorable temperatures, which makes them a good choice for being sustainable bioagents.
Aspergillus spp. also prevented white mold disease onset on soybean and common bean detached leaves inoculated with S. sclerotiorum mycelium or sclerotia, which confirms the biocontrol potential of Aspergillus spp. In the greenhouse experiment, A. flavus and A. pseudoelegans were avoided because of their mycotoxigenic secretions detected by HPLC. The ability of A. japonicus and A. niger to suppress white mold disease on common beans grown in S. sclerotiorum-infested potting media was comparable to the commercially available synthetic fungicide iprodione WP (50%) Bayer, Germany. Moreover, plant vigor and canopy density were much bigger in Aspergillus-treated plants, which suggests the supportive roles of both black Aspergilli as endophytes in legume plants. The endophytic potential of A. japonicus and A. niger was previously proven [90][91][92][94][95][96]. The pronounced ability of black Aspergilli in producing a high amount of oxalic acid and enhancing plant vigor has sparked the idea to investigate their endophytic growth in different legumes, which is currently ongoing in our lab.

Conclusions
In conclusion, Aspergillus species have beneficial mycoparasitic capability against white mold disease induced by S. sclerotiorum. The examined species of Aspergillus were morphologically, microscopically, genetically, and physiologically distinct, but they all share the ability to suppress white mold disease. In essence, Aspergillus spp. inhibited Sclerotinia's germination and deteriorated its mycelium in vitro. Aspergillus spp. were also protective for common bean and soybean detached leaves inoculated with S. sclerotiorum. The non-mycotoxigenic species, A. japonicus and A. niger, were able to reduce the severity and incidence of white mold disease in the greenhouse. Some characteristic features of Aspergillus spp. were also revealed in this study, such as the head shells that distinguish black Aspergilli. The role of seriation type in conidiospore discharge was also suggested. It was noticed that uniseriate Aspergilli discharge more spores than biseriates. Sporulation of Aspergillus spp. is light dependent, but to different levels. The absence of light completely abolishes sporulation of the biseriates A. niger and A. pseudoelegans, but delays sporulation of the uniseriates A. japonicus and A. flavus.
Supplementary Materials: The following supporting information can be downloaded at: https: //www.mdpi.com/article/10.3390/jof8060626/s1, Figure S1. Morphological characterization of Aspergillus japonicus, A. niger, A. flavus, and A. pseudoelegans. (A and B) the reverse color of Aspergillus species on MEA and PDA after 7 days of incubation at 28 • C. (C) Mold-like growth of Aspergillus spp. PDB was incubated on a rotary shaker (200 rpm) at 28 • C for seven days. Figure S2. Head shell of black Aspergilli. Old cultures of Aspergillus spp. of Nigri section. Aspergillus heads are covered in black rounded hard shells that break open after tapping the glass cover with a glass rod. Scale bar = 100 µm.  Figure S4. Chromatograms of aflatoxins. A typical chromatogram of the standard solution for aflatoxins is shown (E). Peaks representing aflatoxins AFB1, AFB2, AFG1, and AFG2 are shown. HPLC analysis of organic acids in the culture filtrate of four Aspergillus isolates (A, B, C, and D) at 7 days of incubation on PDB (pH 7.0). The corresponding known and unknown peaks detected in the culture medium are indicated on each chromatogram. Figure S5. Chromatograms of ochratoxin A. A typical chromatogram of the standard solution for ochratoxin A is shown (D). Figure S6. Multiple sequence alignment of consensus Aspergillus spp. sequences. Alignment was performed using ClustalW algorithm. Sequence alignment infers the single nucleotide polymorphisms (SNPs) among A. japonicus, A. niger, A. flavus, and A. pseudoelegans. Figure S7. Biocontrol potential of Aspergillus spp. against white mold disease on detached soybean leaves. Detached leaves from healthy soybean plants inoculated with freshly propagated S. sclerotiorum inoculum. Two types of inoculums were used: mycelial disks and surface sterilized sclerotia. Inoculum of each Aspergillus spp. was introduced beneath the inoculation point.

Data Availability Statement:
The data collected and analyzed throughout the present research are available upon request. Fungal sequences were deposited in NCBI GenBank and the accession numbers were given in the text. Supplementary Materials are available on journal website.