Next Article in Journal
TCA Cycle and Its Relationship with Clavulanic Acid Production: A Further Interpretation by Using a Reduced Genome-Scale Metabolic Model of Streptomyces clavuligerus
Previous Article in Journal
Numerical Models Can Assist Choice of an Aortic Phantom for In Vitro Testing
Previous Article in Special Issue
3D Printed Nanocellulose Scaffolds as a Cancer Cell Culture Model System
Editorial

Biocomposite Inks for 3D Printing

RISE PFI, Høgskoleringen 6b, 7034 Trondheim, Norway
Bioengineering 2021, 8(8), 102; https://doi.org/10.3390/bioengineering8080102
Received: 9 July 2021 / Accepted: 19 July 2021 / Published: 22 July 2021
(This article belongs to the Special Issue Biocomposite Inks for 3D Printing)
Note: In lieu of an abstract, this is an excerpt from the first page.

Three-dimensional (3D) printing has evolved massively during the last years and is demonstrating its potential in tissue engineering, wound dressings, cell culture models for drug testing, and prosthesis, to name a few [...] View Full-Text
MDPI and ACS Style

Chinga-Carrasco, G. Biocomposite Inks for 3D Printing. Bioengineering 2021, 8, 102. https://doi.org/10.3390/bioengineering8080102

AMA Style

Chinga-Carrasco G. Biocomposite Inks for 3D Printing. Bioengineering. 2021; 8(8):102. https://doi.org/10.3390/bioengineering8080102

Chicago/Turabian Style

Chinga-Carrasco, Gary. 2021. "Biocomposite Inks for 3D Printing" Bioengineering 8, no. 8: 102. https://doi.org/10.3390/bioengineering8080102

Find Other Styles
Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.

Article Access Map by Country/Region

1
Back to TopTop