Integration of GIS and Water-Quality Index for Preliminary Assessment of Groundwater Suitability for Human Consumption and Irrigation in Semi-arid Region

: The Setifian high-plains region, Northeast of Algeria, grapples with challenges in water resource management. As the water demand intensifies across a diverse range of sectors, assessing groundwater quality becomes indispensable. This article responds to the critical need for a thorough assessment of groundwater quality in the Wadi Boussellam sub-watershed. Employing a GIS-based method, we evaluate groundwater geochemistry by estimating the Water Quality Index (WQI), offering a comprehensive overview of water consumption. The analysis of groundwater samples reveals distinct facies, including calcic bicarbonate, calcic chloride, calcic sulfate, and magnesium sulfate, contributing to an enhanced understanding of the hydrochemical composition in the Setif region. Hydrochemical indices, specifically the WQI, Sodium Adsorption Ratio (SAR), and Na% are applied to assess groundwater suitability for various applications. The results indicate that most crops are generally suitable for irrigation, though they advise exercising caution with regard to human consumption. This study underscores the significance of regular monitoring to avert groundwater contamination and ensure sustainable use in the Setif region, providing insights that emphasize the ongoing necessity for efforts in water resource management and the preservation of this vital resource’s quality.


Introduction
Groundwater pollution poses a significant challenge to ensuring the quality and sustainability of water resources in semi-arid regions, where it is the primary source of water for both drinking and irrigation purposes [1][2][3][4].The scarcity and pollution of surface water bodies make groundwater a vital component of securing water supply safety [5][6][7].However, the growth of populations and climate variations has led to an imbalance between groundwater recharge and extraction, resulting in a decline in groundwater levels and quality [8].In semi-arid regions, groundwater is often contaminated with high levels of nitrate, fluoride, or arsenic, which can have severe health implications for residents [9].For instance, high levels of nitrate contamination can cause serious health effects, including infant methemoglobinemia, type -1-childhood diabetes, blood pressure, and acute respiratory infection [10].Similarly, high fluoride concentrations can lead to endemic fluorosis [11].The health risks associated with contaminated groundwater are particularly concerning for children, who are more susceptible to the negative impacts of these contaminants [12].In some regions, the health risks posed by groundwater pollution are exacerbated by the lack of reliable surface water resources, making groundwater the only viable option for water supply [13].To mitigate these risks, sustainable development and rainwater harvesting are recommended to improve groundwater quality.Additionally, conjunctive use of groundwater and surface water, as well as the construction of water storage facilities, can help to ensure a safe and reliable water supply [14].
The significance of groundwater quality assessment lies in its role in determining the suitability of groundwater for various purposes [15].Managing this essential resource optimally and sustainably requires a thorough assessment of its chemical composition.The desired quality of groundwater supply varies depending on its intended use [16].
The water quality index (WQI) was developed by Horton in 1965 [17] and utilizes a mathematical formula to derive a numerical value that represents overall water quality based on physical, chemical, and biological measurements [18].However, the WQI has limitations, and researchers have proposed recommendations to overcome them.One recommended approach is the use of an integrated-weight method to incorporate environmental uncertainty into groundwater quality evaluation [19].Gao et al. [20] developed the integrated-weight water quality index (IWQI) specifically for assessing groundwater's suitability for drinking purposes.Additionally, selecting appropriate water quality indicators is crucial for accurate WQI calculation, with parameters weighted according to their importance to water quality [21].Akhtar et al. [22] provided a detailed review of the evolution of water quality index (WQI) estimation methods, from simple direct calculations to multi-criteria approaches.Despite the widespread use of the WQI in urban water supply assessment, its application in evaluating groundwater quality for irrigation purposes is equally important, as it will help to minimize adverse impacts on agriculture [23].Analyzing groundwater quality and creating GIS-based maps are integral components of effective groundwater planning strategies [24].Hydrochemical studies and GIS analyses help identify contaminated zones, assess water suitability for various purposes, and provide essential information for water management programs [25].
The study focuses on the Wadi Boussellam sub-watershed, where groundwater's vital role in socio-economic activities faces threats from domestic, industrial, and agricultural pollution.The study aims to evaluate groundwater quality through analytical monitoring of pollutants to enhance sustainable water management and conserve vital resources.This involves updating parameter selection for the WQI, addressing emerging contaminants, and aligning with regulatory standards.The methodology integrates fieldwork, laboratory analysis, data processing, and spatial mapping for a comprehensive evaluation of groundwater quality.Its key contributions include detailed insights into physicochemical parameters, geospatial assessments using GIS-RS techniques, and standardized measures through the WQI.This focus benefits northeastern Algeria's agricultural development and regional water management and conservation efforts.The study's reliable methodology and detailed analysis contribute significantly to environmental sciences, aiding decision-makers in formulating effective management strategies for aquifer protection.

Study Area
The upstream Bousselam sub-watershed spans an area of approximately 1776.84 square kilometers within the larger Soummam watershed (Figure 1a,b).It is bordered by the Chott Beïda sub-watershed to the east, the Soubella sub-watershed to the south, and the K'sob and Middle Bousselam sub-watersheds to the west.To the north, it is adjacent to the Dehamcha and Agrioun sub-watersheds (Figure 1c). the K'sob and Middle Bousselam sub-watersheds to the west.To the north, it is adjacent to the Dehamcha and Agrioun sub-watersheds (Figure 1c).Diversified agricultural activities are prevalent in the area, with Northern regions engaging in mountain agriculture, apiculture, and tree farming, while the Central and Southern regions focus on extensive farming, cereal cultivation, fallow land, and livestock rearing.Industrial activities, which are concentrated around Setif and A the K'sob and Middle Bousselam sub-watersheds to the west.To the north, it is adjacent to the Dehamcha and Agrioun sub-watersheds (Figure 1c).Diversified agricultural activities are prevalent in the area, with Northern regions engaging in mountain agriculture, apiculture, and tree farming, while the Central and Southern regions focus on extensive farming, cereal cultivation, fallow land, and livestock rearing.Industrial activities, which are concentrated around Setif and Aїn Oulmene n Oulmene cities, include agribusiness, wood processing, paper production, leather manufacturing, textiles, plastics, chemicals, glass production, metallurgy, mechanical, electrical, and hydraulic engineering, quarrying, construction materials, and public works.
The study area exhibits a continental to semi-arid climate with distinct seasonal patterns.The region experiences a rainy, cold season from September to May, succeeded by a dry, hot season for the remainder of the year.Over the past five decades (1973-2023), the annual average rainfall has varied from 550 mm in the North to 300 mm in the South.January stands out as the coldest month, with an average temperature of 5.4 • C, while the highest temperatures (averaging 26.3 • C) are recorded for July.Hydrogeologically, carbonate formations from the Lower and Upper Cretaceous periods constitute the main aquifers, with a Mio-Plio-Quaternary shallow aquifer, and a deep karstic aquifer that contributes significantly to the region's water resources.The geological setting includes Numidian thrust sheets, Tellian thrust sheets, a South-Setifian allochthonous set, a South-Setifian autochthonous set, and a non-tectonic set, comprising sedimentary formations composed of limestone, marl, clay, sandstone, dolostone, and quaternary deposits (Figure 2).cities, include agribusiness, wood processing, paper production, leather manufacturing, textiles, plastics, chemicals, glass production, metallurgy, mechanical, electrical, and hydraulic engineering, quarrying, construction materials, and public works.
The study area exhibits a continental to semi-arid climate with distinct seasonal patterns.The region experiences a rainy, cold season from September to May, succeeded by a dry, hot season for the remainder of the year.Over the past five decades (1973-2023), the annual average rainfall has varied from 550 mm in the North to 300 mm in the South.January stands out as the coldest month, with an average temperature of 5.4 °C, while the highest temperatures (averaging 26.3 °C) are recorded for July.Hydrogeologically, carbonate formations from the Lower and Upper Cretaceous periods constitute the main aquifers, with a Mio-Plio-Quaternary shallow aquifer, and a deep karstic aquifer that contributes significantly to the region's water resources.The geological setting includes Numidian thrust sheets, Tellian thrust sheets, a South-Setifian allochthonous set, a South-Setifian autochthonous set, and a non-tectonic set, comprising sedimentary formations composed of limestone, marl, clay, sandstone, dolostone, and quaternary deposits (Figure 2).[Legend: 1-recent alluvium, 2-slope unconsolidated formations, 3-topsoil, 4-slopes screes, 5-limestone with flints, 6-blackish marl, 7-brown and yellow limestone marl, 8-bandy clays, 9-yellowish marl, 10-redhead sandstone and conglomerates, 11-sandstones, 12-sandy loam, 13-marly and limestone tiles, 14-yellow-marl, 15dolostone, 16-black marl, 17-marl and limestone sub-lithographic, 18-dolostone and limestone with flints, 19-gray marl and limestone, 20-marl and limestone, 21-limestone, 22-clay and sandstone benches, 23-marly limestone tiles, 24-phosphatic white limestone, 25-dolostones, 26-black marl, 27-colored clays and ground gypsum, 28-fine limestone].

Materials and Methods
The study of groundwater chemistry plays a crucial role in monitoring the changes in dissolved elements, determining their origins, and evaluating water quality for diverse applications.Additionally, it aids in identifying areas vulnerable to contamination, contributing to improved water resource management strategies.
The methodology adopted for this research comprises field sampling, laboratory analysis, WQI calculation, and spatial mapping, as shown in the flowchart in Figure 3.

Materials and Methods
The study of groundwater chemistry plays a crucial role in monitoring the changes in dissolved elements, determining their origins, and evaluating water quality for diverse applications.Additionally, it aids in identifying areas vulnerable to contamination, contributing to improved water resource management strategies.
The methodology adopted for this research comprises field sampling, laboratory analysis, WQI calculation, and spatial mapping, as shown in the flowchart in Figure 3.To analyze physicochemical parameters, we followed the methodology established by Rodier et al. [26].Water samples were collected from farmers' wells (Figure 1d) (Table 1) in March 2022, following standard protocols [27].Sampling involved collecting samples after 15 min of pumping from 16 wells using 1.5 L sterile polyethylene containers.In situ measurements of temperature, electrical conductivity (EC), and pH were conducted using a WTW cond 3110 device.The samples were then stored at 4 °C to maintain their integrity until they were transported for analysis.The analysis included determining concentrations of calcium (Ca 2+ ), magnesium (Mg 2+ ), bicarbonate (HCO3 − ), and chloride (Cl − ) through volumetric titration methods.Calcium and magnesium were titrated with 0.01 N EDTA, while bicarbonate and chloride were analyzed using HCl and AgNO3, respectively.Sodium (Na + ) and potassium (K + ) concentrations were measured using Atomic Absorption Systems Agilent Technologies 200 series AA.Sulfate (SO4 2− ), ammonium (NH4 + ), and nitrates (NO3 − ) were analyzed calorimetrically with visible UV/vis ODYSSEY DR 2500 spectrophotometry.Each parameter was analyzed at least twice to ensure accuracy.The analyzed water chemistry data were used to determine water quality variables and calculate the WQI.To analyze physicochemical parameters, we followed the methodology established by Rodier et al. [26].Water samples were collected from farmers' wells (Figure 1d) (Table 1) in March 2022, following standard protocols [27].Sampling involved collecting samples after 15 min of pumping from 16 wells using 1.5 L sterile polyethylene containers.In situ measurements of temperature, electrical conductivity (EC), and pH were conducted using a WTW cond 3110 device.The samples were then stored at 4 • C to maintain their integrity until they were transported for analysis.The analysis included determining concentrations of calcium (Ca 2+ ), magnesium (Mg 2+ ), bicarbonate (HCO 3 − ), and chloride (Cl − ) through volumetric titration methods.Calcium and magnesium were titrated with 0.01 N EDTA, while bicarbonate and chloride were analyzed using HCl and AgNO 3 , respectively.Sodium (Na + ) and potassium (K + ) concentrations were measured using Atomic Absorption Systems Agilent Technologies 200 series AA.Sulfate (SO 4 2− ), ammonium (NH 4 + ), and nitrates (NO 3 − ) were analyzed calorimetrically with visible UV/vis ODYSSEY DR 2500 spectrophotometry.Each parameter was analyzed at least twice to ensure accuracy.The analyzed water chemistry data were used to determine water quality variables and calculate the WQI.We used a 30 m resolution DEM to delineate the basin and its hydrological features.Data processing and visualization were done using Excel-StatPro 7.0, and ESRI-ArcGIS 10.8 software.The calculation of saturation indices for dissolved minerals was performed using the WATEQ 4F software.Diagram tools aided in calculating saturation and Base Exchange indices, while hydrochemical facies and water classification models (Riverside, Stabler, Piper, Wilcox) were generated using OriginPro v9.7 software.
Water quality was assessed using a standard WQI method [28,29] and ranked into five categories: excellent, good, medium, poor, and extremely poor [30,31], (Table 2).This classification serves as a decision-making tool for assessing groundwater quality across various applications, consolidating diverse data into a single metric.The calculation methodology involved a weighted arithmetic index for water type classification and compared chemical concentrations of the analyzed water samples against the Algerian Drinking Water Standards (ADWS), (Figure 3).

Relative Weight Assignment
Each physicochemical parameter of water is assigned a relative weight (Wi) using Equation ( 1): where Wi is the relative weight of the (i th ) parameter, Si is the standard value of the applicable norm, and K is the proportionality constant, which is determined using Equation (2): The calculation of the relative weight (Wi) in Equation ( 1) considers the ratio between the standard value (Si) and the proportionality constant (K).This weight reflects the significance of each parameter in influencing the overall water quality index, with higher weights indicating a greater impact on water quality assessment.
Accurate determination of relative weights is crucial for precise water quality assessment, considering factors like environmental context, potential health risks, and regulatory standards.Careful consideration of these factors ensures that the assigned weights align with the actual impact of each parameter on water quality assessment.
Utilizing these relative weights in the overall water quality index calculation appropriately weighs the contribution of each parameter, providing a comprehensive and objective assessment of water quality.

Quality Assessment Scale (qi)
A quality assessment scale (qi) is computed for each parameter using Equation (3): where q i is the water quality rating (scale) of the (i th ) parameter, c i is the concentration of each parameter in mg/L, and (s i ) is the standard value of the applicable norm.The q i scale enables independent assessment of parameter quality, with higher values indicating degraded water quality and lower values indicating better quality, such as that observed in pure water with low concentrations.Quantitative assessment through the quality assessment scale allows for a detailed understanding of individual parameters' contributions to the overall water quality index.This information aids in prioritizing remediation efforts and identifying potential contamination sources.

Water Quality Index
The WQI was used to assess the suitability of water resources for domestic use, focusing on key quality metrics [32].The calculation of WQI is performed as shown in Equation (4) [22].
where Wi is the weight assigned to each parameter, with n indicating the total parameters considered.The Wi term signifies the relative weight for each parameter, while qi assesses the overall water quality.

Water Quality Index Mapping
The development of the WQI map involves using physicochemical parameters from water sampling points and processing them through GIS using inverse distance weighting interpolation.This approach offers precise spatial visualization of water quality across the studied region.

Water Suitability for Irrigation
Irrigation water quality, determined by dissolved salts' (Na, Cl, Mg, Ca, K) type and concentration, significantly impacts soil salinization.These salts originate from natural sources like rock and soil weathering, as well as anthropogenic sources such as domestic and industrial discharges.Evaluation of water suitability for irrigation employs two simplified methods.
The Riverside method [33] assesses soil salinization risk using the Sodium Adsorption Ratio (SAR) in Equation ( 5): The Wilcox method (Equation ( 6)) [20] considers Ca 2+ , Mg 2+ , K + , and Na + concentrations for classifying water into five categories (excellent, good, permissible, mediocre, and poor) (Table 3).A graphical representation illustrates the sodium percentage (Na + %) and electrical conductivity relationship, which is crucial for understanding irrigation water's impact on plant growth.

Base Exchange Index
The Base Exchange Index (BEI), introduced by Schoeller [35], provides an estimation of the ion exchange process between water and the underlying geological formations.It measures the ratio of exchanged ions to the initially present ions of the same nature in the water.The calculation is performed using Equation (7): where concentrations are expressed in meq/L.The interpretations of the BEI values are as follows: BEI = 0: No ion exchange.BEI > 0: Sodium (Na + ) and potassium (K + ) ions in the water are exchanged for calcium (Ca 2+ ) and magnesium (Mg 2+ ) ions in the rock (direct exchange).BEI < 0: Calcium (Ca 2+ ) and magnesium (Mg 2+ ) ions in the water are exchanged for sodium (Na + ) and potassium (K + ) ions in the rock (reverse exchange).

Saturation Index
The Langelier Saturation Index (LSI) is used to assess the tendency of water to be aggressive or to cause scaling [36].It is calculated by subtracting the actual water (pH) from the predetermined equilibrium (pHs) using Equation ( 8): In the case of LSI: • SI < 0: pH < pHs, indicating aggressive water.• SI > 0: pH > pHs, indicating scaling water.• SI = 0: pH = pHs, indicating a state of equilibrium.
pH is measured as the logarithm of the concentration of H + or H 3 O + ions (mg/L), as shown in Equation ( 9) [37].
where the concentration of H 3 O + is expressed in mg/L.The Langelier Saturation Index (LSI), ref. [38] is calculated using Equation (10).LSI = pH − pHs (10) where pH represents the actual pH measurement of the water.pHs is the saturation pH in calcite or calcium carbonate, according to Hallopeau and Dubin's method [39], and is calculated based on Equation ( 11): C is a constant that is dependent on water mineralization and temperature [C = log K's − log K'2 + 9.2].Alc and CaO represent total alkalinity (TAC) and calcium content, both of which are expressed in mg/L of CaO.
The obtained grades could be divided as follows.If LSI > 0, it indicates scaling or incrustation in water.If LSI < 0, it indicates aggressive or corrosive water.And if LSI = 0, the water is at equilibrium, saturated with CaCO 3 , implying that no deposits are formed or dissolved.In our case, the measured pH values were inputted into the "Diagram" program.And the software calculated the index automatically.
The total hardness (TH) of water, measured in ( • F), reflects the concentrations of calcium and magnesium in meq/L, as determined by Equation (12).
where "TH" represents the total Hardness of the water and "r" represents the stoichiometric coefficient of calcium and magnesium ions in the water sample.It signifies the proportion of these ions contributing to the total hardness (TH) calculation, where their concentrations are measured in (meq/L).
Based on the calculated TH, water levels are structured in the following categories: Water is classified as very soft when TH ranges from 0 to 7 • F, soft between 7 and 15 • F, moderately hard within 15 to 30 • F, hard between 30 and 40 • F, and very hard if TH exceeds 40 • F.

Physicochemical Parameters
The results shed light on key physicochemical parameters of the groundwater samples, offering insights into their quality and potential impacts on water resources.
Temperature Influence: Water temperature affects analytical parameters, notably conductivity, and can indicate the water's origin and flow dynamics.The measured temperatures range from 15.4 to 17.9 • C and fall within acceptable standards, suggesting a protective shield against ambient temperature influences.
pH Levels: The pH values, ranging from pH 6.5 to pH 7.5 across the wells, indicate a neutral to slightly alkaline nature of the groundwater in the study area.
Electrical Conductivity: EC, an indicator of dissolved salt content, shows variations from 1042 µS/cm to 1613 µS/cm, reflecting mineralization levels.Higher EC values, particularly in central and western areas, suggest prolonged contact with geological formations, influencing water quality.
Total Hardness: TH values range from hard to very hard.This could be attributed to the carbonate leaching, highlighting the potential challenges that might arise in relation to certain uses due to hardness levels.
Elemental Composition: Naturally occurring elements generally meet WHO and ADWS standards.However, elevated chlorides and nitrates, likely resulting from wastewater discharge, exceed guidelines.Anthropogenic sources contribute to high phosphate and ammonium levels, surpassing recommended limits.
The analysis of 16 well-water samples revealed elevated levels of phosphate (PO 4− ) and ammonium (NH 4+ ), ranging from 11.22 mg/L to 18.76 mg/L for phosphate and 2.37 mg/L to 5.72 mg/L for ammonium.These concentrations surpass the Algerian Drinking Water Standards (ADWS) of 0.4 mg/L for phosphate and 0.3 mg/L for ammonium, signaling a significant deviation from regulatory norms with potential risks to human health and the environment.Immediate action is needed to address these exceedances and implement effective mitigation strategies, including improving wastewater treatment and adopting sustainable agricultural practices, to ensure the safety and sustainability of water resources.
The results underscore the complexity of groundwater quality, which is influenced by natural geological processes and anthropogenic activities.Elevated mineralization, hardness, and pollutant levels, particularly with regard to the presence of chlorides, nitrates, phosphates, and ammonium, signify potential risks to water suitability for various uses.Effective management strategies are crucial to mitigate these impacts; such strategies include implementing wastewater treatment measures, controlling industrial discharges, and promoting sustainable agricultural practices to safeguard groundwater quality and ensure long-term water resource sustainability.
Table 4 summarizes the water geochemistry analysis conducted on the collected samples, whereas Table 5 showcases the calculated relative weight of the physicochemical parameters, helping to assess their significance in the overall water quality assessment.

Water Classification
The graphical representation using the Piper diagram reveals the presence of four facies types, with a predominance of the chloride-calcium facies, accounting for approximately 7 out of 16 water sampling points (Figure 4).The chloride-calcium facies (37%) is observed in wells P2, P3, P4, P5, P11, and P12, which are located in the Northeastern part of the study area.The presence of chlorides can be attributed to the occurrence of Miocene gypsum marls or domestic pollution infiltrated by waters from the Boussellam Wadi.

Water Classification
The graphical representation using the Piper diagram reveals the presence of four facies types, with a predominance of the chloride-calcium facies, accounting for approximately 7 out of 16 water sampling points (Figure 4).The chloride-calcium facies (37%) is observed in wells P2, P3, P4, P5, P11, and P12, which are located in the Northeastern part of the study area.The presence of chlorides can be attributed to the occurrence of Miocene gypsum marls or domestic pollution infiltrated by waters from the Boussellam Wadi.The bicarbonate-calcium facies (31%) is observed in wells P1, P10, P12, P13, and P16, which could be attributed to the surrounding Cretaceous carbonate formations.The process of water infiltration and percolation through soils can lead to increased bicarbonate and calcium concentrations.The sulfate-calcium facies (19%) are likely the result of gypsum dissolution present in the Miocene marls, as well as anthropogenic inputs The bicarbonate-calcium facies (31%) is observed in wells P1, P10, P12, P13, and P16, which could be attributed to the surrounding Cretaceous carbonate formations.The process of water infiltration and percolation through soils can lead to increased bicarbonate and calcium concentrations.The sulfate-calcium facies (19%) are likely the result of gypsum dissolution present in the Miocene marls, as well as anthropogenic inputs such as industrial waste and agricultural nutrients.The magnesium-sulfate facies (13%) are observed in wells P6 and P7 in the southwest of the study area, which is attributed to the dissolution of sulfates (gypsum marls) and dolomite.

Base Exchange Index
With the exception of well 14, which shows a negative value, all water sampling points exhibit positive values (Table 6).This suggests that the sodium and potassium ions in the water are being exchanged for calcium and magnesium ions in the rock mass (direct exchange).

Saturation Index
The study utilized WATEQ software [40] to calculate the saturation indices of dissolved minerals, revealing a chemical evolution in the study region.Water in the area is oversaturated with carbonate minerals but undersaturated with evaporitic minerals.Carbonate minerals, particularly dolomite, tend to precipitate, indicating water's aggressiveness in dissolving these minerals to achieve equilibrium.

Water Quality Index
The calculated WQI values (Table 7) were used to create a groundwater quality map based on the spatial distribution of various indices (Figures 5 and 6).These three tools allow for the classification of the studied groundwater, ranging from poor quality for wells P6, P11, and P15 to very poor quality for the remaining wells.This alarming degradation of water, caused by various anthropogenic sources of pollution, necessitates the inevitable implementation of a protective perimeter for the entire Boussellam watershed and rigorous and continuous monitoring of various activities.

Suitability of Water for Irrigation
The graphical representation in the Wilcox diagram indicates that the water quality is sufficient for irrigation purposes (Figure 7).According to the classification based on the Riverside Alkali Index (Figure 8), the water falls into the C3-S1 class, which is considered acceptable for irrigation of crops that can tolerate salts in well-drained soils.The diagram of Wilcox and Riverside suggests that the groundwater in the study area is suitable for irrigation purposes, without risk of alkalization and blocking of soil pores, and therefore it necessitates waterproofing, as described in [38], which is provided to implement adequate drainage and continually monitor the salt level in the soil.
Both natural and artificial recharge significantly affect groundwater quality.Natural recharge occurs through processes like precipitation, infiltration, and percolation, while artificial recharge involves human activities such as irrigation, injection wells, or intentional recharge basins.
Returned irrigation flow, also known as agricultural runoff, can lead to salinization of groundwater.This happens when water containing dissolved salts, fertilizers, pesticides, or other contaminants seeps into the groundwater after being discharged onto the land.Over time, the accumulation of salts and pollutants can degrade groundwater quality, rendering it unsuitable for various purposes.
Besides salinization, natural recharge can introduce sediments, nutrients, and pollutants into groundwater through surface-water runoff.Geological processes like weathering or leaching of minerals from rocks and soils can also alter groundwater's chemical composition.To mitigate these impacts on groundwater quality, several measures can be taken.These include adopting best management practices in agriculture to minimize the use of fertilizers and chemicals and implementing precision irrigation techniques to reduce water and chemical runoff.Proper wastewater treatment processes should be employed to remove contaminants before discharging treated water into the ground.
Establishing buffer zones or vegetative barriers can act as filters, preventing contaminants and sediments from reaching the groundwater.Regular monitoring and water quality assessments are essential for identifying changes or trends in groundwater quality and enabling timely actions.

Conclusions
The hydrogeochemical study aimed to characterize groundwater in the study area and assess its suitability for various uses, including human consumption and irrigation.The presence of bicarbonates, chlorides, sulfates, calcium, and magnesium in the groundwater was primarily attributed to natural sources such as leached geological formations, but potential anthropogenic pollution was also identified.The waters exhibited tendencies towards equilibrium, particularly in evaporitic elements, and precipitation of carbonate elements, which was facilitated by direct ion exchange processes.
However, the analysis of the Water Quality Index (WQI) indicated significant pollution levels throughout the region, rendering the water unsuitable for human consumption.Nevertheless, the use of Richarde and Wilcox diagrams classified the water as suitable for irrigation with caution.Artificial recharge can contribute to groundwater contamination if improperly treated wastewater or untreated sewage is discharged into the ground, introducing pathogens, organic compounds, heavy metals, or other pollutants.Industrial activities, if not properly managed, can also result in groundwater pollution as pollutants infiltrate the groundwater.In urban areas with impervious surfaces, stormwater runoff carries pollutants like oil, heavy metals, or chemicals into the groundwater.
To mitigate these impacts on groundwater quality, several measures can be taken.These include adopting best management practices in agriculture to minimize the use of fertilizers and chemicals and implementing precision irrigation techniques to reduce water and chemical runoff.Proper wastewater treatment processes should be employed to remove contaminants before discharging treated water into the ground.
Establishing buffer zones or vegetative barriers can act as filters, preventing contaminants and sediments from reaching the groundwater.Regular monitoring and water quality assessments are essential for identifying changes or trends in groundwater quality and enabling timely actions.

Conclusions
The hydrogeochemical study aimed to characterize groundwater in the study area and assess its suitability for various uses, including human consumption and irrigation.The presence of bicarbonates, chlorides, sulfates, calcium, and magnesium in the groundwater was primarily attributed to natural sources such as leached geological formations, but potential anthropogenic pollution was also identified.The waters exhibited tendencies towards equilibrium, particularly in evaporitic elements, and precipitation of carbonate elements, which was facilitated by direct ion exchange processes.
However, the analysis of the Water Quality Index (WQI) indicated significant pollution levels throughout the region, rendering the water unsuitable for human consumption.Nevertheless, the use of Richarde and Wilcox diagrams classified the water as suitable for irrigation with caution.
To address the identified challenges, urgent remediation measures are necessary to combat the observed high pollution levels in groundwater.This includes implementing control measures to regulate and reduce anthropogenic activities that contribute to pollution.Advanced wastewater treatment systems should be adopted to minimize contaminant input.
Establishing appropriate protection perimeters around groundwater sources is crucial to prevent further contamination, and strict enforcement and regular monitoring of these parameters are essential.
Optimizing water management practices is vital for sustainable resource use.This includes promoting water conservation, efficient irrigation techniques, and the reuse of treated wastewater for non-potable purposes whenever feasible.
Continuous monitoring of groundwater quality is necessary to track long-term changes in chemical composition and assess the effectiveness of implemented measures.This requires the establishment of a well-distributed network of monitoring wells.
Further research should explore advanced treatment technologies and innovative methods like membrane filtration and bioremediation to develop sustainable and costeffective remediation strategies.
Raising public awareness about groundwater protection, responsible water management, and pollution risks is crucial.Engaging stakeholders in these efforts will foster collective action aimed at preserving groundwater resources.
Implementing these recommendations can mitigate pollution, protect groundwater sources, and ensure the long-term sustainability and quality of water resources for present and future generations.

Figure 1 .
Figure 1.(a) Geographical location of the major watersheds of North Algeria within the Mediterranean basin.(b) Overview of the Soummam-Bousselam watershed and its neighboring watersheds.(c) Upstream Bousselam and adjacent subwatersheds.(d) Indication of the positions of water sampling points.Diversified agricultural activities are prevalent in the area, with Northern regions engaging in mountain agriculture, apiculture, and tree farming, while the Central and Southern regions focus on extensive farming, cereal cultivation, fallow land, and livestock rearing.Industrial activities, which are concentrated around Setif and Aїn Oulmene

Figure 1 .
Figure 1.(a) Geographical location of the major watersheds of North Algeria within the Mediterranean basin.(b) Overview of the Soummam-Bousselam watershed and its neighboring watersheds.(c) Upstream Bousselam and adjacent subwatersheds.(d) Indication of the positions of water sampling points.

Figure 1 .
Figure 1.(a) Geographical location of the major watersheds of North Algeria within the Mediterranean basin.(b) Overview of the Soummam-Bousselam watershed and its neighboring watersheds.(c) Upstream Bousselam and adjacent subwatersheds.(d) Indication of the positions of water sampling points.

Figure 3 .
Figure 3. Flowchart of the adopted methodology.

Figure 3 .
Figure 3. Flowchart of the adopted methodology.

Figure 4 .
Figure 4. Classification of groundwater according to the Piper diagram.

Figure 4 .
Figure 4. Classification of groundwater according to the Piper diagram.

Figure 6 .
Figure 6.Mapping of groundwater quality in the study area. .

Figure 6 .
Figure 6.Mapping of groundwater quality in the study area..Figure 6. Mapping of groundwater quality in the study area.Haut du formulaire.

Figure 6 .
Figure 6.Mapping of groundwater quality in the study area..Figure 6. Mapping of groundwater quality in the study area.Haut du formulaire.

Hydrology 2024 , 19 Figure 7 .
Figure 7. Water quality for irrigation according to Wilcox.Figure 7. Water quality for irrigation according to Wilcox.

Figure 8 .
Figure 8. Water quality for irrigation according to Riverside.

Figure 8 .
Figure 8. Water quality for irrigation according to Riverside.
Sample ID Longitude (m)Latitude (m) Z(m) Level Sample ID Longitude (m) Latitude (m) Z(m)

Table 4 .
Groundwater analysis results and ADWS.

Table 5 .
Relative weight of physicochemical parameters.

Table 7 .
Groundwater type according to the quality index.