Evolution of Tunneling Hydro-Technology: From Ancient Times to Present and Future

: Water tunnels are one of the oldest hydro-technologies for extracting water resources and/or transmitting them through water distribution systems. In the past, human societies have used tunneling for various purposes, including development, as a measure to enable underground resource extraction and the construction of transportation networks in challenging landscapes and topographies. The development of hydro-technology potentially involves the construction of tunnels to feed aqueducts, irrigation and waste water systems. Thus, the ability to make and maintain tunnels became an important component in creating lasting and sustainable water systems, which increased water supply and security, minimized construction costs, and reduced environmental impact. Thus, this review asks how, when and why human societies of the past included tunneling for the development of lasting water supply systems. This review presents a comprehensive overview across time and space, covering the history of tunneling in hydro technology from antiquity to the present, and it ponders how past experiences could impact on future hydro-technological projects involving tunneling. A historical review of tunnel systems enhances our understanding of the potential, performance, challenges, and prospects associated with the use of hydro-techniques. In the past, as the different examples in time and space demonstrate, tunneling was often dedicated to solving local problems of supply and disposal. However, across the world, some features were repeated, including the need for carving through the living rock or digging to create tunnels covered with stone slabs. Also, the world-wide use of extensive and costly tunnel systems indicates the high level of investment which human societies are willing to make for securing control over and with its water resources. This study helps us to gather inspiration from proven technologies of the past and more recent knowledge of water tunnel design and construction. As we face global warming and its derivate problems, including problems of water scarcity and ﬂooding, the ability to create and maintain tunnels remains an important technology for the future.


Prolegomena
By studying the past we learn about the present and are planning anything for the future.

Andreas N. Angelakis
Traditional water tunnels were constructed mainly for the exploitation of groundwater in arid and semi-arid regions.These technologies presented major achievements in this scientific field throughout the millennia [1].It is not easy to study past water tunnels and demonstrate their sustainability.However, Barghouth and Al-Sa'ed [2] presented an overview of the sustainability of ancient water supply systems in Jerusalem from the Chalcolithic period (ca 4500-3200 BC) to the present.Ancient evidence and landscape settings indicated that water resources management in Jerusalem was based on underground hydro-structures.Sustainable water supply facilities were erected, consisting mainly of well-developed water tunnels or other, similar underground hydro-technologies, to supply the town and its agricultural developments, showing that irrigation was practiced for many centuries in that area.
Another example from India demonstrates how traditional water tunnels have been used for centuries to tap into groundwater resources, particularly in arid and semi-arid regions, described in this manuscript in detail.These hydro-technologies have been a significant achievement in the field of water management, and their sustainability can be observed through the ages.The Indus Valley Civilization in ancient India had an extensive network of underground channels, which are called karez there.Details are provided on those underground aqueducts which, in some parts of the world, are named qanats [3].They are also known as foggaras and khettaras, and were used mainly for irrigation and other purposes [4].In modern times, India has made significant progress in tunneling engineering.For example, the Mumbai Metro Rail Project has included the construction of a 33.5 km long underground section, which was dug using tunnel boring machines (TBMs) to reduce the cost and duration of tunneling while minimizing environmental impact [5].Furthermore, the Chenani-Nashri Tunnel, India's longest tunnel, was built using the New Austrian Tunneling Method (NATM), a sustainable and adaptable approach to tunneling that minimizes resource consumption while enhancing worker safety [6,7].As India continues to invest in infrastructure, it is anticipated that it will make further strides in tunneling engineering, contributing to sustainable development in the country.In addition, tunnels for drainage purposes were developed in central Greece from the end of the Bronze Age.It should also be noted that sometimes tunnels were surface-cut and covered for crossing a watershed, and "valley-side" tunnels were built to pass steep rock walls or to protect an aqueduct in unstable geology.Also, the shafts-and-galley technique was developed, which is known as qanat [8,9].These are, moreover, discussed in the main text.
The sustainability of ancient water supply systems in India can be seen in the karez system, which is prevalent in the western regions of the country.The karez system dates back to the 2nd century AD at least; it is an underground water management system that collects water from mountain springs and channels it through a series of tunnels to irrigate agricultural land [10].Similarly, in the southern state of Tamil Nadu, a network of underground tunnels known as "Eri-pattu" has been used since ancient times to provide irrigation to paddy fields.These tunnels collect rainwater during the monsoon season and store it underground, providing a year-round supply of water for irrigation [11].In recent times, modern technologies such as bore wells and tube wells have become more prevalent in India, but traditional water tunnels are still used in many parts of the country, especially in rural areas.These hydro-technologies have played a crucial role in sustaining agriculture and ensuring the availability of water for domestic use [12].depth of the qanat and the air passage.The nearer the shafts were to the mother well, the deeper they were.
Mother well: The furthest, water-infiltrating well is called the mother well.The elements of a qanat can be defined as follows [16,17]: Appearance: The place where water comes into view on the surface (tunnel reache the Earth's surface).
Tunnel: The canal, with a section resembling a horseshoe inside the ground, featuring a gentle slope for water conveyance from the aquifer to the appearance.
Wet zone: The infiltrating walls inside the gallery of a qanat.The discharge rate i directly dependent upon the wet zone.Indeed, this is part of the tunnel which goes below the groundwater table.
Dry zone: A portion of the gallery between the wet zone and the appearance.The canal was gradually cut deeper due to the decline of the water table.
Shaft: The dry vertical wells situated across the gallery facilitated soil extraction a well as ventilation and dredging.The distance between the two shafts was based on the depth of the qanat and the air passage.The nearer the shafts were to the mother well, the deeper they were.
Mother well: The furthest, water-infiltrating well is called the mother well.Qanat has many advantages, namely, securing water for irrigation and household consumption in arid regions, balancing the use of groundwater, and low maintenance and operation costs.At the same time, qanats are vulnerable to floods and earthquakes, and they cannot be used for exploiting water from deep layers.Also, in comparison to wells qanats are more lasting and sustainable and have no energy cost for exploiting water.
Qanat routes need to be regularly cleaned and maintained because they are subjected to damage and destruction by flash floods.To prevent shafts from being filled with sand they are covered with stone slabs or other objects.One of the famous qanats in Iran i shown in Figure 2 (i.e., Kish qanat).Qanat has many advantages, namely, securing water for irrigation and household consumption in arid regions, balancing the use of groundwater, and low maintenance and operation costs.At the same time, qanats are vulnerable to floods and earthquakes, and they cannot be used for exploiting water from deep layers.Also, in comparison to wells, qanats are more lasting and sustainable and have no energy cost for exploiting water.
Qanat routes need to be regularly cleaned and maintained because they are subjected to damage and destruction by flash floods.To prevent shafts from being filled with sand, they are covered with stone slabs or other objects.One of the famous qanats in Iran is shown in Figure 2 (i.e., Kish qanat).The elements of a qanat can be defined as follows [16,17]: Appearance: The place where water comes into view on the surface (tunnel reaches the Earth's surface).
Tunnel: The canal, with a section resembling a horseshoe inside the ground, featuring a gentle slope for water conveyance from the aquifer to the appearance.
Wet zone: The infiltrating walls inside the gallery of a qanat.The discharge rate is directly dependent upon the wet zone.Indeed, this is part of the tunnel which goes below the groundwater table.
Dry zone: A portion of the gallery between the wet zone and the appearance.The canal was gradually cut deeper due to the decline of the water table.
Shaft: The dry vertical wells situated across the gallery facilitated soil extraction as well as ventilation and dredging.The distance between the two shafts was based on the depth of the qanat and the air passage.The nearer the shafts were to the mother well, the deeper they were.
Mother well: The furthest, water-infiltrating well is called the mother well.Qanat has many advantages, namely, securing water for irrigation and household consumption in arid regions, balancing the use of groundwater, and low maintenance and operation costs.At the same time, qanats are vulnerable to floods and earthquakes, and they cannot be used for exploiting water from deep layers.Also, in comparison to wells, qanats are more lasting and sustainable and have no energy cost for exploiting water.
Qanat routes need to be regularly cleaned and maintained because they are subjected to damage and destruction by flash floods.To prevent shafts from being filled with sand, they are covered with stone slabs or other objects.One of the famous qanats in Iran is shown in Figure 2 (i.e., Kish qanat).

Early Ancient Egyptians and Other Civilizations (ca 4000-30 BC)
In Egypt, one of the oldest civilizations, the River Nile has been the main source of freshwater, supplying about 97% of its water resources.Even places far away from the Nile conveyed its water through open and closed aqueducts.The type of aqueduct used in early Egypt was a very basic structure.It consisted of an open canal excavated between the Nile River and the location which required the water, made from stones.Open and closed aqueducts were applied commonly in pyramids that were constructed by pharaohs close to the Nile shoreline.The aqueducts transmitted water to the bottom of these pyramids.They linked the base of the pyramid and the Nile bed with a huge open canal controlled by massive doors of stone that allowed water to pass from the Nile.For example, under the Giza pyramids, the openings and passageways for water transferring are equal to the size of a football playing area.In addition, many vertical openings and aqueducts were used to control the Nile flood, as these openings were lower than the Nile level and sunk the water into the aqueducts underneath the pyramids [19].
Egyptians also used underground aqueducts to deliver the Nile water to the temples.For example, in 57 BC, Ptolemy III built the Edfu temple, in which there was a room called the chamber of the Nile where the priests of the temple obtained the holy water of the Nile.This chamber received Nile water through a stone-built tunnel with a length of one kilometer up to the Nile shoreline.The Dendera temple also featured a similar chamber and stone tunnel [20].
The Persians invaded Egypt in 525 BC and introduced the technology of the long underground aqueducts.For example, they constructed what they called a quant, or aqueduct, to deliver water to the Kharga Oasis 200 km west of the Nile.The aqueduct was constructed from a slightly sloping pathway underground, which connected with many vertical shafts [21].Another good example of the digging of an underground aqueduct can be found at the Bahariya Oasis, where many sites display remains of this aqueduct.Moreover, in the northeastern part of the Sinai peninsula, there is a spring called Ain EI Gudeirat, which supplied spring water from an aqueduct that was built hundreds of years ago and recently watered olive trees at a daily rate of 1500 m 3 [22,23].
In Alexandria, a city in the northwest part of Egypt, the Greek engineer Archimedes supervised the construction of an overturned (or inverted) siphon to transfer water for kilometers and hundreds of meters of hydraulic heads.These pipes were mostly made of stone and helped transfer Nile water in aqueducts across valleys to the city [24].A map of ancient Alexandria with a channel of the Nile Delta is shown in Figure 3.

Ancient India (ca 3300-185 BC)
India has a rich history of tunneling and hydro-technology dating back to the prehistoric era.Some of the earliest examples of tunneling in India can be found in the Indus Valley Civilization, which existed from approximately 3300 BC to 1300 BC.One of the oldest known tunnels is the Khandagiri-Udayagiri cave complex in Odisha, which was It should be noticed that an Inverted siphon Is not a siphon but a term applied to pipes that must dip below an obstruction to form a "U" shaped flow path.Large inverted siphons are used to convey water being carried in canals or flumes across valleys, for irrigation or gold mining.These siphons were developed in Classical times; however, the Romans used inverted siphons of lead pipes to cross valleys that were too big for the construction of an aqueduct (e.g., Aspendos aqueduct) [3].

Ancient India (ca 3300-185 BC)
India has a rich history of tunneling and hydro-technology dating back to the prehistoric era.Some of the earliest examples of tunneling in India can be found in the Indus Valley Civilization, which existed from approximately 3300 BC to 1300 BC.One of the oldest known tunnels is the Khandagiri-Udayagiri cave complex in Odisha, which was hidden by sandstone cliffs during the Maurya period (321-185 BC), and was used for residential spaces and places of worship [25].During the Mauryan Empire (321-185 BC), tunnels were used to irrigate farmland and supply water to the growing population.These types of caves are a series of rock-cut Jain and Buddhist temples that were built by carving into the hillside, creating a network of tunnels and chambers.
During the Indus Valley Civilization, underground drainage systems were constructed to manage water supply and mitigate floods.The Great Bath in Mohenjo-Daro is a remarkable example of their expertise in hydro-engineering.This rectangular pool, built around 2600 BC, was constructed using waterproof bricks and a complex system of water channels and drains [26].The Harappan city of Dholavira also has a sophisticated water management system that included a series of underground tunnels and reservoirs [27] (Figure 4).The Indus Valley people were innovative in their approach to tunneling and used it as a means of managing water supply and creating efficient irrigation systems.Finally, there is limited evidence of tunneling in ancient India.However, the Mauryan Empire (321-185 BC) made significant advancements in tunneling technology.Tunnels were used for irrigation, with some examples being the Pataliputra irrigation tunnels in present-day Bihar, India.Additionally, the construction of Emperor Ashoka's rock-cut edicts, dating back to the 3rd century BC, required extensive tunneling and carving into solid rock [29].

Minoan and Mycenaean Civilizations (ca 3200-1050 BC)
Most Minoan aqueducts transported water through open channels, but a few examples of covered surface channels have survived.In Knossos, water was transported by closed terracotta pipes and/or open or covered channels of various dimensions through a gravity aqueduct about 0.7 km long [30] (Figure 5).Finally, there is limited evidence of tunneling in ancient India.However, the Mauryan Empire (321-185 BC) made significant advancements in tunneling technology.Tunnels were used for irrigation, with some examples being the Pataliputra irrigation tunnels in present-day Bihar, India.Additionally, the construction of Emperor Ashoka's rock-cut edicts, dating back to the 3rd century BC, required extensive tunneling and carving into solid rock [29].

Minoan and Mycenaean Civilizations (ca 3200-1050 BC)
Most Minoan aqueducts transported water through open channels, but a few examples of covered surface channels have survived.In Knossos, water was transported by closed terracotta pipes and/or open or covered channels of various dimensions through a gravity aqueduct about 0.7 km long [30] (Figure 5).

Minoan and Mycenaean Civilizations (ca 3200-1050 BC)
Most Minoan aqueducts transported water through open channels, but a few examples of covered surface channels have survived.In Knossos, water was transported by closed terracotta pipes and/or open or covered channels of various dimensions through a gravity aqueduct about 0.7 km long [30] (Figure 5).[22].
An advanced hydraulic tunneling technique was introduced by the Minyans of mainland Greece in about 1300 BC, using tunnels for drainage purposes.One prominent example of this is the Akraifnio drainage tunnel, which drained Lake Kopais and used the land for agriculture (Figure 6).The tunnel has a height of 1.8 m and a width of 1.5 m.Sixteen vertical shafts were excavated along the axis of the tunnel, and through those the tunnel was excavated [8].An advanced hydraulic tunneling technique was introduced by the Minyans of mainland Greece in about 1300 BC, using tunnels for drainage purposes.One prominent example of this is the Akraifnio drainage tunnel, which drained Lake Kopais and used the land for agriculture (Figure 6).The tunnel has a height of 1.8 m and a width of 1.5 m.Sixteen vertical shafts were excavated along the axis of the tunnel, and through those the tunnel was excavated [8].Several studies on the ancient Kopais drainage system have been carried out by several researchers [31][32][33][34].According to Knauss [32], Minyans attempted to gain land from Kopais Lake in two main phases.The first phase used earth dams to protect irrigated polders against floods.After a dam's failure, a second system was developed.The second attempt was based on a 25 km long canal that guided water from the Kopais basin to the natural sinkholes located in the north-eastern part of the area.
The construction of the drainage of Lake Kopais was stopped at the end of the era of Alexander the Great due to the end of the funding of the project.Alexander's engineer had begun the construction of a tunnel that would lead the water of the lake to the sea.The construction method used the technique of that period: the excavation of vertical Several studies on the ancient Kopais drainage system have been carried out by several researchers [31][32][33][34].According to Knauss [32], Minyans attempted to gain land from Kopais Lake in two main phases.The first phase used earth dams to protect irrigated polders against floods.After a dam's failure, a second system was developed.The second attempt was based on a 25 km long canal that guided water from the Kopais basin to the natural sinkholes located in the north-eastern part of the area.
The construction of the drainage of Lake Kopais was stopped at the end of the era of Alexander the Great due to the end of the funding of the project.Alexander's engineer had begun the construction of a tunnel that would lead the water of the lake to the sea.The construction method used the technique of that period: the excavation of vertical shafts, followed by horizontal excavation and the connection of the vertical shafts at the bottom level [35].

Babylonian, Assyrian, and Other Asian Civilizations
Ancient Babylonian and Assyrian civilizations had advanced knowledge of tunneling and hydro-technology, building elaborate underground aqueducts, tunnels, and canals to manage water supply and irrigation.
The Sultanate of Oman is an arid region, and ever since its early history the country has depended on groundwater as a freshwater resource.They used surface and underground tunnels to convey water horizontally via gravity from groundwater into valleys for irrigation and drinking purposes.They called these tunnels and aqueducts 'Aflaj', and they had a long history dating back several thousands of years in Oman [36].Aflaj is defined as the plural of the term 'Falaj', which refers to a channel supplied by a groundwater source.The term Falaj is Arabic and means 'to divide or split' [37].Establishing Aflaj helped ancient Omanis to provide freshwater for communities for different purposes.Omanis classify Aflaj as Ghaily, Daudi, and Ayni.Ghaily Falaj is seasonal, as it relies on a shallow underground source that stops in dry periods.The Daudi provides permanent water flow via the top surface of the valley being used as a transferring channel.The Ayni Falaj derives its water from natural springs and the water is usually hot because it comes from very deep layers [38].

Iron Age (ca 1050-750 BC)
During the Iron Age in India (ca 1200-750 BC), tunneling technology was used primarily for mining and transportation purposes.The Khetri Copper Mines in Rajasthan, India, dating back to the 8th century BC, are an excellent example of ancient Indian mining operations that utilized tunnels.These tunnels were excavated to extract copper ore from the mines and transport it to smelting facilities.The technology used during this period was primitive, with hand tools being the primary means of excavation.However, the expertise of ancient Indian miners and tunnelers cannot be underestimated, as evidenced by the vast network of interconnected tunnels that were constructed during this period [39].

Archaic, Classical, and Hellenistic Periods (ca 750 BC-31 BC)
One of the oldest tunnels in the world was built below Jerusalem in the 8th century BC from the Gihon karst spring to the Siloam pool [40,41].Known as Hezekiah's tunnel (Figure 7), this 500 m long structure was built by drilling from the spring and the destination pool in two directions (counter-excavated tunnel), meeting in the middle.The tunnel still carries water.
The technologies of hydraulic tunneling developed by prehistoric civilizations were further developed and improved during historical times.Allegedly, in late Archaic Samos, Greece, the engineer Eupalinus constructed the prestigious and renowned tunnel bearing his name, the Eupalinos or Eupalinian aqueduct (Greek: Eυπαλίνιoν óρυγµα, i.e., Efpalinion orygma).The evidence of the historian Herodotus for the construction of the tunnel (Histories, 3. 60) potentially connects the construction of the tunnel with the tyrant Polycrates (ruled 540-522 BC).The aqueduct is 1036 m in length and runs through Mount Kastro, and was built to provide fresh water for the island's main city.The tunnel is the second known tunnel in history to have been excavated from both ends (Ancient Greek: Hydrology 2023, 10, x FOR PEER REVIEW 9 of 34 the mines and transport it to smelting facilities.The technology used during this period was primitive, with hand tools being the primary means of excavation.However, the expertise of ancient Indian miners and tunnelers cannot be underestimated, as evidenced by the vast network of interconnected tunnels that were constructed during this period [39]. 2.7.Archaic, Classical, and Hellenistic Periods (ca 750 BC-31 BC) One of the oldest tunnels in the world was built below Jerusalem in the 8th century BC from the Gihon karst spring to the Siloam pool [40,41].Known as Hezekiah's tunnel (Figure 7), this 500 m long structure was built by drilling from the spring and the destination pool in two directions (counter-excavated tunnel), meeting in the middle.The tunnel still carries water.The technologies of hydraulic tunneling developed by prehistoric civilizations were further developed and improved during historical times.Allegedly, in late Archaic Samos, Greece, the engineer Eupalinus constructed the prestigious and renowned tunnel bearing his name, the Eupalinos or Eupalinian aqueduct (Greek: Ευπαλίνιον όρυγµα, i.e., Efpalinion orygma).The evidence of the historian Herodotus for the construction of the tunnel (Histories, 3. 60) potentially connects the construction of the tunnel with the tyrant Polycrates (ruled 540-522 BC).The aqueduct is 1036 m in length and runs through Mount Kastro, and was built to provide fresh water for the island's main city.The tunnel is the second known tunnel in history to have been excavated from both ends (Ancient Greek: ἀµφίστοµον, i.e., amphistomon, having two openings), and the first with a geometrybased approach in doing so [19].The tunnel is inscribed on the UNESCO World Heritage List along with the nearby Pythagoreion and Heraion of Samos, and it was designated as an International Historic Civil Engineering Landmark in 2017 [42].Today, the tunnel is a popular tourist attraction and can be visited through its southern entrance.A view of a section of the tunnel and a frequently used entrance is depicted below in Figure 8. µϕίστoµoν, i.e., amphistomon, having two openings), and the first with a geometrybased approach in doing so [19].The tunnel is inscribed on the UNESCO World Heritage List along with the nearby Pythagoreion and Heraion of Samos, and it was designated as an International Historic Civil Engineering Landmark in 2017 [42].Today, the tunnel is a popular tourist attraction and can be visited through its southern entrance.A view of a section of the tunnel and a frequently used entrance is depicted below in Figure 8.

Archaic, Classical, and Hellenistic Periods (ca 750 BC-31 BC)
One of the oldest tunnels in the world was built below Jerusalem in the 8th BC from the Gihon karst spring to the Siloam pool [40,41].Known as Hezekiah' (Figure 7), this 500 m long structure was built by drilling from the spring and the tion pool in two directions (counter-excavated tunnel), meeting in the middle.Th still carries water.The technologies of hydraulic tunneling developed by prehistoric civilizatio further developed and improved during historical times.Allegedly, in late Archai Greece, the engineer Eupalinus constructed the prestigious and renowned tunnel his name, the Eupalinos or Eupalinian aqueduct (Greek: Ευπαλίνιον όρυγµα, i.e., ion orygma).The evidence of the historian Herodotus for the construction of th (Histories, 3. 60) potentially connects the construction of the tunnel with the tyran rates (ruled 540-522 BC).The aqueduct is 1036 m in length and runs through Mo tro, and was built to provide fresh water for the island's main city.The tunnel is th known tunnel in history to have been excavated from both ends (Ancien ἀµφίστοµον, i.e., amphistomon, having two openings), and the first with a ge based approach in doing so [19].The tunnel is inscribed on the UNESCO World H List along with the nearby Pythagoreion and Heraion of Samos, and it was desig an International Historic Civil Engineering Landmark in 2017 [42].Today, the tu popular tourist attraction and can be visited through its southern entrance.A v section of the tunnel and a frequently used entrance is depicted below in Figure 8 Engineer Eupalinos made an effort to have the two construction teams meet either horizontally or vertically by the employment of the following techniques: (a) In the vertical plane, at the start of work, Eupalinos leveled around the mountain, probably following a contour line to ensure that both tunnels were started at the same altitude.He increased the possibility of the two tunnels meeting each other, by increasing the height of both tunnels at the point near the join.In the north tunnel, he kept the floor horizontal and increased the height of the roof by 2.5 m, while in the south tunnel he kept the roof horizontal and lowered the level of the floor by 0.6 m (Figure 8a).His precautions as to vertical deviation proved unnecessary, since measurements show that there was very little error.At the meeting point, the closing error in altitude for the two tunnels was a few millimeters [43].(b) In the horizontal plane, Eupalinos calculated the expected position of the meeting point in the mountain.Since two parallel lines never meet, an error of more than 2 m Engineer Eupalinos made an effort to have the two construction teams meet either horizontally or vertically by the employment of the following techniques: (a) In the vertical plane, at the start of work, Eupalinos leveled around the mountain, probably following a contour line to ensure that both tunnels were started at the same altitude.He increased the possibility of the two tunnels meeting each other, by increasing the height of both tunnels at the point near the join.In the north tunnel, he kept the floor horizontal and increased the height of the roof by 2.5 m, while in the south tunnel he kept the roof horizontal and lowered the level of the floor by 0.6 m (Figure 8a).His precautions as to vertical deviation proved unnecessary, since measurements show that there was very little error.At the meeting point, the closing error in altitude for the two tunnels was a few millimeters [43].(b) In the horizontal plane, Eupalinos calculated the expected position of the meeting point in the mountain.Since two parallel lines never meet, an error of more than 2 m horizontally meant that the north and south tunnels would never meet.Therefore, Eupalinos changed the direction of both tunnels, as shown in the picture (the north tunnel to the left and the south tunnel to the right) (Figure 9b).This gave a catching width that was wider by 17 m so that a crossing point would be guaranteed, even if the tunnels were previously parallel and far away.They thus meet at nearly a right angle [43].
creasing the height of both tunnels at the point near the join.In the north tunnel, he kept the floor horizontal and increased the height of the roof by 2.5 m, while in the south tunnel he kept the roof horizontal and lowered the level of the floor by 0.6 m (Figure 8a).His precautions as to vertical deviation proved unnecessary, since measurements show that there was very little error.At the meeting point, the closing error in altitude for the two tunnels was a few millimeters [43].(b) In the horizontal plane, Eupalinos calculated the expected position of the meeting point in the mountain.Since two parallel lines never meet, an error of more than 2 m horizontally meant that the north and south tunnels would never meet.Therefore, Eupalinos changed the direction of both tunnels, as shown in the picture (the north tunnel to the left and the south tunnel to the right) (Figure 9b).This gave a catching width that was wider by 17 m so that a crossing point would be guaranteed, even if the tunnels were previously parallel and far away.They thus meet at nearly a right angle [43].It should be noticed that the water channel used for water transfer was constructed at the bottom of the rock-cut tunnel shown in Figure 8a.The rock-cut tunnel was a working gallery from which the workers could lay the lower-lying terracotta conduit, which It should be noticed that the water channel used for water transfer was constructed at the bottom of the rock-cut tunnel shown in Figure 8a.The rock-cut tunnel was a working gallery from which the workers could lay the lower-lying terracotta conduit, which still functioned in the time of Herodotus.Later, presumably due to blockage of the pipes, the pipeline was broken open and the water allowed to overflow into the rock-cut channel.
Previously, scholars have used John Camp's study [44] of the wells of the Athenian Agora and their alleged origin in droughts in the ca 8th and 4th centuries as the impetus for the development of underground aqueducts in mainland Greece.This is a likely supposition; however, the builders of the first, major aqueducts, the so-called 'tyrants' of the later Archaic age in the south and eastern parts of mainland Greece and in the Aegean islands, may have had other ambitions as well.The autocratic rulers of the late archaic period probably acknowledged the importance of well-functioning water supplies, both as a means to support the growing populations of cities and as a way to rally support behind their rule 'outside the law'.
Chiotis and Marinos [9] pointed out that the aqueducts from the ca 6th through the 4th centuries fell into versions, which were either surface-cut and covered channels as in the Peisistratean and Acharnian aqueducts or shafts-and-galley techniques, as in the aqueducts of Aegina and Megara.Furthermore, Chiotis and Marinos [9] pointed out the important discussion of whether there might be a link between these aqueducts and the Persian qanats developed during the Achaemenid Empire (538-323 BC).Basically, and unlike the qanats, which collect water from a mother well, Greek aqueducts of the shafts-and-galley type collect water, 'mostly all along their course in temperate areas.'Different types of climate, geology, and topography inspired different strategies of technological development.
The mid-sixth century tyrants, the Peisistratids, who governed Athens after the reform period of Solon in 594 BC, have frequently been associated with improvements in the Athenian water supply.The historian Thucydides (2.15.5) attributed alterations to the fountain 'Enneacrounos', or 'Nine Pipes' to 'the tyrants'.Later this famous fountain appeared under the name of the nymph Callirrhoe-'Fairwater' ( [45], 294, et passim).Otherwise, the literature evidence is silent about the construction works of the Peisistratids, and we have to rely on the archaeological evidence for more information about the water supply and construction of tunnels in this period (see further [46][47][48]).
The city-state of Megara, a western neighbor to Athens, saw an erratic political development in the late archaic age, beginning with the tyrant Theagenes, and an oligarchy followed by democracy in the 5th century.The engineer Eupalinos originated from Megara, and it has been suggested that his water-technological interest may have originated in the city's solutions to water management.A fountain was fed with water from an aqueduct covered with long intersected roof gallery sections ( [49]).
The construction of the ancient aqueduct of the Aegean island Naxos, Greece, late in the 6th century BC, may have happened either during the tyranny of Lygdamis or the succeeding brief interval of democracy on the island.The aqueduct ran over 11 km on hillsides at the upper limit of fertile land and consisted of socket-jointed clay pipes of a diameter of ca 0.30 m buried in a ditch ca 1 m underground [50] (Figure 10).Its inclination varied from 0.01 to 0.04%.
the Athenian water supply.The historian Thucydides (2.15.5) attributed alteratio fountain 'Enneacrounos', or 'Nine Pipes' to 'the tyrants'.Later this famous foun peared under the name of the nymph Callirrhoe-'Fairwater' ( [45], 294, et passi erwise, the literature evidence is silent about the construction works of the Peisi and we have to rely on the archaeological evidence for more information about th supply and construction of tunnels in this period (see further [46][47][48]).
The city-state of Megara, a western neighbor to Athens, saw an erratic politic opment in the late archaic age, beginning with the tyrant Theagenes, and an o followed by democracy in the 5th century.The engineer Eupalinos originated fro ara, and it has been suggested that his water-technological interest may have or in the city's solutions to water management.A fountain was fed with water from ueduct covered with long intersected roof gallery sections ( [49]).
The construction of the ancient aqueduct of the Aegean island Naxos, Greec the 6th century BC, may have happened either during the tyranny of Lygdam succeeding brief interval of democracy on the island.The aqueduct ran over 1 hillsides at the upper limit of fertile land and consisted of socket-jointed clay pi diameter of ca 0.30 m buried in a ditch ca 1 m underground [50] (Figure 10).Its inc varied from 0.01 to 0.04%.Most of the examples of hydraulic tunneling described above were constructed to facilitate the water supply of urban centers, and there seems to have been a keen interest among tyrants, but also later, in democratic Athens, to engage in these projects.As mentioned above, such interest was probably due to the support expected from the population.Furthermore, tunneling associated with water management is probably also found in association with intensive agricultural strategies applied during the Classical Period (ca.480-323 BC).Some years ago, Moreno [51] argued that an example existed in the Attic deme (local parish) of Euonymon on the southwestern coast of the peninsula.Here, Moreno argued that intensive farming, combining terracing of farmland with extensive tunneling, providing irrigation for the crops and ensured the basis of a lucrative trade in cash crops for nearby Athens.Other types of agriculture of a more extensive nature undoubtedly existed in other locations in Attica, but the southernmost deme of Atene (contra [52], but see [53]), may have shared features with the up-coast example of Euonymon; however, irrigated water of Athens may have been supplied by open conduits.

Roman Period (31 BC-476 AD)
In the Mediterranean part of the Roman Empire, tunnels were built for (a) the drainage of basins and lakes; (b) the extraction of water from a nappe (spring tunnels); (c) the transport of water in aqueducts; (d) the servicing of harbors, related to silting problems; and (e) for mining gold.

Drainage Tunnels
Some tunnels built in Roman times constitute attempts to drain lakes and use the land for agriculture [14].The longest Roman tunnel built for drainage is the Lake Fucino tunnel, with a length of 5650 m [54][55][56][57][58].It was ordered by the emperor Claudius and was built by 30,000 slaves in 11 years in the qanat mode through 40 vertical access shafts.The older drainage tunnels of Lakes Nemi and Albano [13,[59][60][61] were meant to stabilize the level of the lakes rather than drain them.They contained screens to block debris from entering the tunnel.Drainage tunnels from the Roman period are also known in Greece (Lake Kopais), Turkey, and France.In Turkey, the 250 m-long Bezirgan tunnel near Kalkan drained a polje [62].In France, the Étang de Clausonne tunnel drained a shallow lake [63] (Figure 11).This lake blocked the passage of the Nîmes Roman aqueduct that had to be built below the level of the lake, which therefore had to be drained.The drainage tunnel is adjacent to an aqueduct tunnel (Figure 11).
In the Mediterranean part of the Roman Empire, tunnels were built for (a) the drainage of basins and lakes; (b) the extraction of water from a nappe (spring tunnels); (c) the transport of water in aqueducts; (d) the servicing of harbors, related to silting problems; and (e) for mining gold.

Drainage Tunnels
Some tunnels built in Roman times constitute attempts to drain lakes and use the land for agriculture [14].The longest Roman tunnel built for drainage is the Lake Fucino tunnel, with a length of 5650 m [54][55][56][57][58].It was ordered by the emperor Claudius and was built by 30,000 slaves in 11 years in the qanat mode through 40 vertical access shafts.The older drainage tunnels of Lakes Nemi and Albano [13,[59][60][61] were meant to stabilize the level of the lakes rather than drain them.They contained screens to block debris from entering the tunnel.Drainage tunnels from the Roman period are also known in Greece (Lake Kopais), Turkey, and France.In Turkey, the 250 m-long Bezirgan tunnel near Kalkan drained a polje [62].In France, the Étang de Clausonne tunnel drained a shallow lake [63] (Figure 11).This lake blocked the passage of the Nîmes Roman aqueduct that had to be built below the level of the lake, which therefore had to be drained.The drainage tunnel is adjacent to an aqueduct tunnel (Figure 11).

Spring Tunnels
Tunnels dug into solid rock to access groundwater were built to provide water for many ancient aqueducts.They have been thoroughly studied by speleologists in Italy [64], where more than 140 such spring tunnels from Etruscan, Greek, and Roman construction have been described in the "ancient aqueducts of Italy" project [64].These are complex structures meant to capture enough water to fill an aqueduct downstream.Some are similar in purpose to qanats, but were built by driving a horizontal shaft into the rock without the help of vertical access shafts.Longer spring tunnels, however, were built as proper qanats, with vertical access shafts from which the tunnel was dug in two directions.Examples are tunnels for the Roman aqueducts of Xanthos (Figure 12), Turkey [65]; Sexi, Spain [66][67][68]; Zadar [69,70] and Novalja, Croatia [71].There are also several examples in the middle east, especially in Syria [72,73]; in Northern Africa [74]; and, curiously, in western Germany [14,15,75].A unique case is the tunnel that was excavated to tap the underground water source of Uxellodunum during a siege in the Gallic wars to force the inhabitants to surrender [76].

Aqueduct Tunnels
Aqueduct tunnels can be divided into "transfer tunnels" needed to cross below hills and mountains (Figures 13-17), and "valley-side" tunnels built to pass steep rock walls or to protect an aqueduct in unstable geology (Figure 18).Transfer tunnels exist both in the counter-excavated mode, digging from two entrances to a meeting point, or, more commonly, in qanat mode (Figures 13 and 14), starting with vertical shafts dug from the surface downwards to a common level, after which the shafts are connected by horizontal tunnel segments.Counter-excavated tunnels have only one meeting point, while qanattype tunnels have as many meeting points as there are shafts (Figure 14).Transfer tunnels of both types are among the longest tunnels built in the ancient world.They include the aqueduct tunnel of Bologna (18 km long) [15]; the Vernelles tunnel in the Traconnade tunnel of Aix-en-Provence, which passes below a watershed (>8 km long- [14,77]); the Forino tunnel of the Aqua Augusta near Naples (>6 km long [78,79]); the 4 km long Annio Novus tunnel of Valle Barberini [80][81][82]; and the 5 km long tunnel of Cella in Spain [83].Some other tunnel examples are from Jerusalem and Side (both over 2 km long: [14]); Paterno (1903 m: [78]); Syracuse (1385 m: [15]); Lyon (Mornant tunnel in the Gier aqueduct of Lyon, France, 825 m long: [84]); and several shorter tunnels near Naples [78,85].A famous aqueduct tunnel of 428 m long exists in Saldae, Algeria [14,86].This tunnel was described on the gravestone of Nonius Datus, a Roman engineer who specialized in the building of water tunnels.He was asked to solve a problem with this counter-excavated tunnel since the workers passed each other without meeting [14,15].This is one of the few reports we have of Roman tunnel building written by one of the engineers responsible.
Another interesting tunnel is the 230 m long Bullica tunnel of the Marcia aqueduct, Rome, which consisted of a service tunnel wide enough for carts, from which a lower-lying aqueduct tunnel could be accessed, connected to the access tunnel by shafts (Figure 17c) in the sidewall [81].
Transfer tunnels as mentioned above either had water running on the bare rock if the rock was impermeable, or, more commonly, were plastered (Figure 15b) or had a regular excavated or masonry gutter or even a vaulted channel built inside them (Figure 16).Tunnel workers used oil lamps set in niches to light the workforce, and for maintenance.Commonly, a pilot tunnel was dug first, which was then extended and widened downwards (Figure 15a).Tunnels usually have a rounded vault, but they may also have a flat roof (Figures 14d and 17c).

Aqueduct Tunnels
Aqueduct tunnels can be divided into "transfer tunnels" needed to cross below hills and mountains (Figures 13-17), and "valley-side" tunnels built to pass steep rock walls or to protect an aqueduct in unstable geology (Figure 18).Transfer tunnels exist both in the counter-excavated mode, digging from two entrances to a meeting point, or, more commonly, in qanat mode (Figures 13 and 14), starting with vertical shafts dug from the surface downwards to a common level, after which the shafts are connected by horizontal tunnel segments.Counter-excavated tunnels have only one meeting point, while qanattype tunnels have as many meeting points as there are shafts (Figure 14).Transfer tunnels of both types are among the longest tunnels built in the ancient world.They include the aqueduct tunnel of Bologna (18 km long) [15]; the Vernelles tunnel in the Traconnade tunnel of Aix-en-Provence, which passes below a watershed (>8 km long- [14,77]); the Forino tunnel of the Aqua Augusta near Naples (>6 km long [78,79]); the 4 km long Annio Novus tunnel of Valle Barberini [80][81][82]; and the 5 km long tunnel of Cella in Spain [83].Some other tunnel examples are from Jerusalem and Side (both over 2 km long: [14]); Paterno (1903 m: [78]); Syracuse (1385 m: [15]); Lyon (Mornant tunnel in the Gier aqueduct of Lyon, France, 825 m long: [84]); and several shorter tunnels near Naples [78,85].A famous aqueduct tunnel of 428 m long exists in Saldae, Algeria [14,86].This tunnel was described on the gravestone of Nonius Datus, a Roman engineer who specialized in the building of water tunnels.He was asked to solve a problem with this counter-excavated tunnel since the workers passed each other without meeting [14,15].This is one of the few reports we have of Roman tunnel building written by one of the engineers responsible.Another interesting tunnel is the 230 m long Bullica tunnel of the Marcia aqueduct, Rome, which consisted of a service tunnel wide enough for carts, from which a lower-lying aqueduct tunnel could be accessed, connected to the access tunnel by shafts (Figure 17c) in the sidewall [81].
Transfer tunnels as mentioned above either had water running on the bare rock if the Another interesting tunnel is the 230 m long Bullica tunnel of the Marcia aqueduct, Rome, which consisted of a service tunnel wide enough for carts, from which a lower-lying aqueduct tunnel could be accessed, connected to the access tunnel by shafts (Figure 17c) in the sidewall [81].
Transfer tunnels as mentioned above either had water running on the bare rock if the Since tunnels were not meant to be seen except by maintenance crews, they were purely functional structures and their architectural design was not significant.Therefore, traces of their construction and maintenance are usually well preserved, making it possible to see how they were built.In many tunnels, there are still traces of meeting points where two galleries, dug from opposite sides, met at an angle, or different altitudes (Figure 14).
Although most tunnels have remained unchanged and even lack a constructed water channel, modifications were sometimes made, either widening or narrowing a tunnel (Figure 15).There are also supporting structures, such as a masonry vault or sections of wall-filling in cavities or broken-out sections of tunnel wall (Figure 17a,b).
Many aqueducts have "valley-side tunnels", most built along steep vertical cliffs, which had to be passed (Figure 18).The technique to build them usually involved "horizontal shafts" or windows cut into the wall of the cliff, probably by workers suspended from above, and then connecting the shafts as in qanat construction.Tunnels of this type are known from Chelva, Spain; Galermi, Sicily, and Cella, Spain (Figure 18).A variation of this type of tunnel, the Gadara tunnel in Jordan, was built by excavating sloping shafts with staircases into the side of a valley, which were then connected [88,89].This produced the longest tunnel of the ancient world, with a minimum length of 107 km and 2900 access shafts, supplying the city of Gadara with water from springs in Syria.This tunnel was probably built instead of a normal aqueduct channel at the surface to avoid problems of land sliding in the local soft, crumbling limestone [85,88].

Harbor-Related Tunnels
Harbor-related tunnels, built to either divert rivers away from a harbor or to regulate the flow of water into a harbor, are known from Seleucea, Turkey, and Cosa, Italy.The Çevlik tunnels of Seleucia Pieria, with a total length of 875 m [90][91][92], are part of a flood diversion system including dams and channels to keep flood water away from the harbors of Antiochia, the third largest city in the Roman Empire.In Cosa, a smaller structure, the "Tagliata Etrusca", was dug to avoid the silting of the harbor (Figure 19).
nel workers used oil lamps set in niches to light the workforce, and for maintenance.Com monly, a pilot tunnel was dug first, which was then extended and widened downward (Figure 15a).Tunnels usually have a rounded vault, but they may also have a flat roo (Figures 14d and 17c).
Since tunnels were not meant to be seen except by maintenance crews, they wer purely functional structures and their architectural design was not significant.Therefore traces of their construction and maintenance are usually well preserved, making it possibl to see how they were built.In many tunnels, there are still traces of meeting points wher two galleries, dug from opposite sides, met at an angle, or different altitudes (Figure 14).
Although most tunnels have remained unchanged and even lack a constructed wate channel, modifications were sometimes made, either widening or narrowing a tunnel (Fig ure 15).There are also supporting structures, such as a masonry vault or sections of wall filling in cavities or broken-out sections of tunnel wall (Figure 17a,b).
Many aqueducts have "valley-side tunnels", most built along steep vertical cliffs which had to be passed (Figure 18).The technique to build them usually involved "hori zontal shafts" or windows cut into the wall of the cliff, probably by workers suspended from above, and then connecting the shafts as in qanat construction.Tunnels of this typ are known from Chelva, Spain; Galermi, Sicily, and Cella, Spain (Figure 18).A variation of this type of tunnel, the Gadara tunnel in Jordan, was built by excavating sloping shaft with staircases into the side of a valley, which were then connected [88,89].This produced the longest tunnel of the ancient world, with a minimum length of 107 km and 2900 acces shafts, supplying the city of Gadara with water from springs in Syria.This tunnel wa probably built instead of a normal aqueduct channel at the surface to avoid problems o land sliding in the local soft, crumbling limestone [85,88].

Harbor-Related Tunnels
Harbor-related tunnels, built to either divert rivers away from a harbor or to regulat the flow of water into a harbor, are known from Seleucea, Turkey, and Cosa, Italy.Th Çevlik tunnels of Seleucia Pieria, with a total length of 875 m [90][91][92], are part of a flood diversion system including dams and channels to keep flood water away from the harbor of Antiochia, the third largest city in the Roman Empire.In Cosa, a smaller structure, th "Tagliata Etrusca", was dug to avoid the silting of the harbor (Figure 19).

Tunnels Associated with Mining
A special application of water tunnels is those built to support the mining of metals, especially gold.In Spain, the 120 m long Montefurado tunnel (Figure 20a) was built in the time of Trajan to breach a meander of the river Sil and divert it, so that the riverbed could be explored for gold [93].At the Las Medulas gold mines (Figure 20b), the largest in the Roman Empire [94], tunnels were dug into gold-bearing gravels not to extract the gold, but to assist in the mining process.These tunnels were dug close to the rock wall of the mine, but had no exit; a dammed supply of water upstream was channeled into the tunnels at high velocity, "fracking" the gold-bearing rocks (Figure 20b-d), while continued flow eroded the rock.This is a unique way of using water tunnels in the Roman world.

Tunnels Associated with Mining
A special application of water tunnels is those built to support the mining of metals, especially gold.In Spain, the 120 m long Montefurado tunnel (Figure 20a) was built in the time of Trajan to breach a meander of the river Sil and divert it, so that the riverbed could be explored for gold [93].At the Las Medulas gold mines (Figure 20b), the largest in the Roman Empire [94], tunnels were dug into gold-bearing gravels not to extract the gold, but to assist in the mining process.These tunnels were dug close to the rock wall of the mine, but had no exit; a dammed supply of water upstream was channeled into the tunnels at high velocity, "fracking" the gold-bearing rocks (Figure 20b-d), while continued flow eroded the rock.This is a unique way of using water tunnels in the Roman world.During the Roman period in India (31 BC-476 AD), tunneling technology was used mainly for water management and irrigation purposes.A notable example is the Kaveri Delta system, which dates back to the 1st century AD and features a network of tunnels and canals that were used to divert water from the Kaveri River for agricultural irrigation.The technology used during this period was advanced, with sophisticated engineering techniques being employed for tunnel excavation and maintenance.Additionally, the ancient Indian system of step-wells, such as the Rani ki vav in Gujarat, was also constructed during this period and utilized tunneling techniques for water storage and distribution [95].

Byzantine Period (ca 330-1453 AD)
Byzantine Empire, which replaced the Roman Empire in Anatolia and the eastern Mediterranean, continued the tradition of building advanced water infrastructure, including water tunnels, to supply fresh water to cities and settlements.Istanbul (formerly known as Constantinople) struggled with water problems throughout its history and made enormous efforts to obtain water from nearby locations.After the city was declared the capital of the Roman Empire, Emperor Constantine built the longest line of tunnels in the Roman Empire, which began in Isırancalar (Figure 21) [96].It is believed that the construction of this line was started by Constantine between 324 and 337 and completed by later emperors [97].In a study on this subject, the length of this water supply line, determined through field and map work carried out by [98] between 1993 and 1996, was given as 242 km [99], which is 2.5 times longer than the longest Carthaginian water supply tunnel built by the Romans, with a length of 91 km [100].Later, Valens (364-378) had a water pipeline built to bring water from the Halkalı area [101].It is also known that Theodosius (379-395) had an aqueduct built to bring water from the Belgrade Forest [102].
During the Roman period in India (31 BC-476 AD), tunneling technology was used mainly for water management and irrigation purposes.A notable example is the Kaveri Delta system, which dates back to the 1st century AD and features a network of tunnels and canals that were used to divert water from the Kaveri River for agricultural irrigation.The technology used during this period was advanced, with sophisticated engineering techniques being employed for tunnel excavation and maintenance.Additionally, the ancient Indian system of step-wells, such as the Rani ki vav in Gujarat, was also constructed during this period and utilized tunneling techniques for water storage and distribution [95].

Byzantine Period (ca 330-1453 AD)
The Byzantine Empire, which replaced the Roman Empire in Anatolia and the eastern Mediterranean, continued the tradition of building advanced water infrastructure, including water tunnels, to supply fresh water to cities and settlements.Istanbul (formerly known as Constantinople) struggled with water problems throughout its history and made enormous efforts to obtain water from nearby locations.After the city was declared the capital of the Roman Empire, Emperor Constantine built the longest line of tunnels in the Roman Empire, which began in Isırancalar (Figure 21) [96].It is believed that the construction of this line was started by Constantine between 324 and 337 and completed by later emperors [97].In a study on this subject, the length of this water supply line, determined through field and map work carried out by [98] between 1993 and 1996, was given as 242 km [99], which is 2.5 times longer than the longest Carthaginian water supply tunnel built by the Romans, with a length of 91 km [100].Later, Valens (364-378) had a water pipeline built to bring water from the Halkalı area [101].It is also known that Theodosius (379-395) had an aqueduct built to bring water from the Belgrade Forest [102].[97].
Among other water tunnels in this region is the first canal and bridge system, which was completed in 373 AD, and which brought water from the important springs in Danamandra and Pınarca.This system had a total length of 268 km and included an estimated 130 new bridges, varying in size from single-arch to larger-than-average double-arch bridges.All of the enclosed water channels were constructed of mortar-covered stone Among other water tunnels in this region is the first canal and bridge system, which was completed in 373 AD, and which brought water from the important springs in Danamandra and Pınarca.This system had a total length of 268 km and included an estimated 130 new bridges, varying in size from single-arch to larger-than-average double-arch bridges.All of the enclosed water channels were constructed of mortar-covered stone blocks that were 1 m wide and 1.6 m high, with an arched Within the city, the Bozdo gan Bridge (or Valens Aqueduct), with its eighty arches and a length of 971 m, is considered one of the longest water bridges in the Roman world.But that is not all; they built this water channel up to a length of 494 km.With a height of 2 m and a width of 1.6 m, these new tunnels are larger than those built in the first phase [97].The final water tunnel in Constantine is the Ballıgerme, a wide channel spanning a deep gorge above the Karaman Dere (Figure 22).Both the upper and lower canals then run along the south side of the valley, winding around the elevated ridge crossed by the Anastasian Wall to the southeast [101].
x FOR PEER REVIEW 21 of 35 Bozdoğan Bridge (or Valens Aqueduct), with its eighty arches and a length of 971 m, is considered one of the longest water bridges in the Roman world.But that is not all; they built this water channel up to a length of 494 km.With a height of 2 m and a width of 1.6 m, these new tunnels are larger than those built in the first phase [97].The final water tunnel in Constantine is the Ballıgerme, a wide channel spanning a deep gorge above the Karaman Dere (Figure 22).Both the upper and lower canals then run along the south side of the valley, winding around the elevated ridge crossed by the Anastasian Wall to the southeast [101].Another tunnel in Anatolia is the Kemer dam, including a water tunnel.It is located near the ancient city of Aspendos in the province of Antalya.The Kemer dam and tunnel is a remarkable Byzantine water project.The tunnel was built to carry water from the Koprüçay River to the city of Aspendos.It was built according to the Roman technique, which typically used stone or rock tunnels.The interiors were often lined with a layer of waterproof mortar or concrete to prevent water leakage and erosion.Another water tunnel is the Perge water tunnel [103].The ancient city of Perge, also in Anatolia, had a Roman water tunnel system.This tunnel, like others in the region, was used to transport water to the city from distant sources.This tunnel was part of a larger aqueduct system that transported water.The tunnel was often dug by hand, with workers using tools such as picks and chisels.The Perge was constructed with a gradual slope or incline.This slope allowed gravity to move the water through the tunnel without the need for pumps or mechanical devices.There are also tunnels from the Byzantine period and underground aqueducts in Cappadocia, which is known for its unique underground cities.These tunnels were used Another tunnel in Anatolia is the Kemer dam, including a water tunnel.It is located near the ancient city of Aspendos in the province of Antalya.The Kemer dam and tunnel is a remarkable Byzantine water project.The tunnel was built to carry water from the Koprüçay River to the city of Aspendos.It was built according to the Roman technique, which typically used stone or rock tunnels.The interiors were often lined with a layer of waterproof mortar or concrete to prevent water leakage and erosion.Another water tunnel is the Perge water tunnel [103].The ancient city of Perge, also in Anatolia, had a Roman water tunnel system.This tunnel, like others in the region, was used to transport water to the city from distant sources.This tunnel was part of a larger aqueduct system that transported water.The tunnel was often dug by hand, with workers using tools such as picks and chisels.The Perge was constructed with a gradual slope or incline.This slope allowed gravity to move the water through the tunnel without the need for pumps or mechanical devices.There are also tunnels from the Byzantine period and underground aqueducts in Cappadocia, which is known for its unique underground cities.These tunnels were used for protection and as a source of water in times of conflict or siege [104][105][106][107].
There are many long-distance waterways in the Turkish Aegean and Mediterranean regions.These systems include spring water collection chambers, lead, stone, and clay pipes of various sizes, rock-hewn and masonry canals, tunnels over 2 m high, inverted siphons with pressures up to 190 m for lead pipes and 155 m for stone pipes, and aqueducts up to 40 m high.One of the longest Roman water transport routes, at 100 km, leads to Phoceia (Foça).In addition, lengths of 65 km at Pergamon (Bergama), 30 km at Smyrna ( ˙Izmir), and 42 km at Ephesus are among the most fascinating examples of various water supply systems in the ancient world.The 3.3 km long stone pipe siphon of the Karapınar water conduit to Smyrna can withstand water pressure of 155 m, while the lead pipe siphon of the Madrada g water conduit to Pergamon can withstand water pressure of up to 190 m.These siphons, dating from the late decades of the first millennium BC Hellenistic period, functioned at some of the highest pressures ever recorded in antiquity.The stone siphon at Aspendos is the longest in Turkey, on arches at 1.7 km.The Soma transport to the demolished aqueduct of Pergamon across the Karkassos (Ilyas) stream would have been 40 m high, making it the second-highest Roman aqueduct after the Pont-du-Gard of Nîmes.Another tunnel system and river detour from the Roman period is the Çevlik Tunnel.Its construction took place between the first and second centuries AD.The 875 m long system had a capacity of 70 m 3 /s.It included two tunnel segments, 90 and 30 m long.The dimensions were in the range of 6-7 m, and the cross sections were either semicircular or trapezoidal.It was the largest structure at that time.The 250 m long Bezirgan tunnel near Kalkan, which is 1.1 m wide and 2.2 m high, serves as a floodwater conduit for the Karst polje [107].

Water Tunnelling in Early and Mid-Modern Times (ca 1453-1850 AD)
During medieval times in India (ca 476-1400 AD), tunneling technology was used for water supply, irrigation, and transportation.Notable examples include the Anicut Dam in Tamil Nadu, the Patal Bhuvaneshwar Cave in Uttarakhand, and the Rani-ki-Vav stepwell in Gujarat.These structures and tunnels demonstrate India's engineering capabilities and played an important role in the development of hydro-technology infrastructure during this period.
In Egypt's capital, Cairo, the Citadel Aqueduct was constructed at the beginning of the 13th century by Ayyubid sultans and then completed by the Mamluk State to convert Nile water into a new castle.The aqueduct started from the Nile shoreline, where water was raised by successive waterwheels, and ran into the aqueduct to the Citadel.The aqueduct was raised by a tower of arches constructed from masonry.It was still used during the Ottoman period.Many aqueducts that remain near the Citadel can be seen today, such as the impressive hexagonal tower used for water intake [108,109].
The damage and deterioration of the Constantinople water system that occurred during the Roman period were aggravated by the Latin occupation in 1204, after which the water system became virtually unusable.When Constantinople fell into the hands of the Ottomans in 1453, extensive repairs and additions were made to the system.The Kırkçeşme waterways, originating from the Belgrade forests, are among the most important water sources of Constantinople.In connection with the structures built between 1554 and 1564, 33 arches of different sizes were constructed [110].The Uzun, the Kovuka, the Mo glova, and the Güzelce aqueducts are the longest ones, with 711 m each.The sixteen different waterways that make up the Halkalı waterways were built between 1453 and 1755.In Constantinople's past, water and the relative architectural structures were considered very valuable, since the city is shaped by water and filled with life through its dams, arches, fountains, water fountains, spa, and cisterns [101,111].The Mazul aqueduct, the Kara aqueduct, the Turuncluk aqueduct, and the Bozdogan (Valens) aqueduct, which is now known as one of the arches of the Halkalı Canal and was later restored by the Ottoman Empire, are important Roman aqueducts built in Constantinople in the fourth century [96,101].The Mâzul aqueduct, commonly referred to as the Mâzul aqueduct, was built around the same time in Constantinople and spans the Uzuncaova stream in the Military District [96].It was the first aqueduct that transported the water of the Halkalı River.It was built of two stories of limestone blocks and has a height of 19 m and a length of 110 m, containing 13 arches in the upper row and 7 arches in the bottom [96].After its restoration by Fatih Sultan Mehmed, it was used during the Turkish era and again during the time of Constantine V (741-775) [112].During the Ottoman era, many dams, aqueducts, rivers, fountains, and basins were rebuilt and new fountains and baths were constructed.
The Kırkçeşme waterways facility collected water from the Alibey and Ka gıthane streams, which was then stored in reservoirs and transported to the city through E grikapı.Because durable pipes capable of withstanding high pressure were not available at the time, aqueducts were built in valleys and water was transported through them [96].Uzun aqueduct is the longest arch of all the lines, with a height of 26 m and a length of 711 m.The arches are 4.5-4.6 m wide on the upper row and 3.7-5.2m wide on the lower row [96].Kırık aqueduct, also known as E gri or Kovuk aqueduct, is a three-story arch 35 m high and 342 m long [114].The Mo glova aqueduct, which is considered an architectural masterpiece of the Kırkçeşme waterway facilities, is a two-story arch that is 35 m high and 258 m long [110].The geometric structure of the arches is a great engineering achievement.To prevent the arches from tipping over, the base of the legs was widened in the shape of a pyramid so that the arches could be kept unusually thin.To allow the upper part of the lower arch to be used like a bridge, a passage was created through the legs, cleverly connected to the slopes.The legs were given a special shape towards the source to prevent the water from forming a depression in front of them due to the flow [98,99,106].The Ma glova aqueduct has the largest arch span after the Pont-du-Gard aqueduct in France [114].
The Güzelce aqueduct, across the Cebeciköy Stream, is another aqueduct of the Kırkçeşme waterway infrastructure [96].Again, Mimar Sinan used a trapezoidal wall system and two-sided buttresses to strengthen the legs.It has 11 openings on the upper floor and 8 openings in the basement, with an opening width of 5.6-6.1 m [114].It is a two-story building.To resist lateral forces (earthquakes, wind), the legs of this arch were trapezoidal in shape and reinforced with buttresses [98,99,106].Other important singlestory arches include the Kara aqueduct, the Develio glu aqueduct, the Vâlide aqueduct, and the Alacahamam aqueduct, which was built on a branch of the Cebeciköy stream.The Ali Paşa aqueduct is another arch built under Mimar Sinan.This trapezoidal, twostory aqueduct has a length of 102 m and a height of 16.4 m.The Ali Paşa aqueduct has 13 openings, with a width of 5 m each [96].During the Ottoman period, aqueducts were built in different parts of the empire.In Constantinople, about forty significant examples are known [110].The Kırkçeş me water conduit, which is the most important water network in the city, has thirty-five arches, six of which are two-or three-story monumental examples.This water conduit, dating back to the time of Theodosius I (379-395), was destroyed during attacks from the West at the beginning of the 7th century.This facility was almost completely rebuilt by Mimar Sinan between 1554 and 1563 [106,110].During the reign of Sultan Süleyman the Magnificent, water was brought to the city from sources such as Taşmüsellim, Hıdıra ga villages, and the Kurtalça gı stream in the northeast of Edirne in the name of Haseki Hürrem Sultan [115,116].
Although not mentioned in the records, it is accepted that these facilities, including the Hançerli, Ortakçı, Arap, Çifte, Kurt, Yedigöz, Hıdıra ga, Üçgöz, O glanlı, and Hasana ga aqueducts, were built by Mimar Sinan around 978 (1570-71) during the construction of the Selimiye Mosque and Complex.The Governor of Edirne, ˙Izzet Paşa, repaired these water structures, which were made of cut stone and consisted of pointed arches in a single row, in 1890 after they had been damaged over time [110].The double-decker aqueduct built in Kavala, Greece, during the reign of Sultan Süleyman the Magnificent is notable among the monumental aqueducts built during the Turkish period in the Balkans.The lower arches were made wider than the upper ones, and lightning holes were drilled between the upper arches.The Mustafa Paşa aqueduct, a 3800 m structure with fifty-five arches in the northwest of Skopje, transports water from Banya Mountain.Bricks were used in the arches, which were constructed with cut stone and sandstone [110].One of the most important bridges on the Taksim water system, which was built during the reign of Sultan Mahmud I, is the Mahmud I Bridge, which has 21 arches and is 400 m long [96,106,117].Two rows of arches are only present in the portion that is built along the river.
Another structure with double rows of arches, known as the Ali Paşa Bridge or the Şirin aqueduct, is located on a tributary of the Ayvalı River near the military field.The Avasköy Bridge (also known as Yılanlı aqueduct or Tekaqueduct), was constructed nearby by renowned Ottoman architect Mimar Sinan.Eleven arches make up this bridge, which is constructed of limestone [118].The Kumrulu Bridge (also known as Akyar Bridge), which has a single arch and is located on the Süleymaniye road, the Kara aqueduct Bridge, with three arches, and the Paşa Bridge, which carries the Turunçlu water to the city at the intersection of the Beyazıt aqueduct, are ordinary water bridges [110].Also, another aqueduct was constructed by the Grand Vizier Safranbolulu ˙Izzet Mehmed Paşa, and it supplies water to Safranbolu.It is made of mortar and rubble stone, measures 116 m long and 60 m high, and has one major and five tiny arches [110].The single-pointed arch of the Akdere aqueduct, with a width of 4.10 m and an opening of 1.10 m, traverses the valley as the Kırkgöz water is transported from the Pınarbaşı water source to Kahramanmaraş.The arch, which has a cut stone roof and a base made of rubble stone, is in ruins [110].
India's history of tunneling and hydro-technology continued to evolve and advance throughout the medieval period, with notable examples including the complex water supply system of the Qutb Minar complex in Delhi, built by the Mamluk dynasty in the mid-13th century AD.During the early and mid-modern times in India (ca 1400-1850 AD), tunneling technology continued to play a vital role in the country's hydro-technology infrastructure.A notable example is the Rajon Ki Baoli stepwell in Delhi, built during the 16th century AD.This impressive structure includes a series of underground tunnels and chambers that were used for water storage and purification (Delhi Tourism and Transportation Development Corporation).Another significant example is the Brihadeeswarar Temple in Tamil Nadu, built during the 11th century AD, which features a series of underground channels that collect and distribute water for the temple's use (Archaeological Survey of India).Furthermore, the Mughal Empire, which ruled over India during the 16th and 17th centuries, contributed considerably to the development of tunneling technology in the country.The Mughals constructed several underground water channels, known as "qanats," to provide water for their gardens, palaces, and cities.One notable example is the Shalimar Bagh garden in Srinagar, which features a network of underground channels that collect and distribute water from a nearby spring (India Water Portal).Overall, during the early and mid-modern periods in India, continued innovation and developments in tunneling technology were achieved, thus supporting the country's growing hydro-technology needs.

Tunneling in Contemporary Times (1853 AD-Present)
In contemporary times (1853 AD-present), tunneling technology in India has continued to evolve and expand, playing a significant role in the country's infrastructure development.A major project is the Kaleshwaram Lift Irrigation Project in Telangana, which includes the construction of a network of tunnels to transfer water from the Godavari River to drought-prone regions of the state (India Today).Another notable example is the Chenani-Nashri Tunnel in Jammu and Kashmir, which is the longest road tunnel in India, measuring 9.2 km, and was constructed to provide all-weather connectivity between the two regions (National Highways Authority of India).Additionally, tunneling technology has been used in the construction of metro rail systems in cities such as Delhi, Mumbai, Kolkata, and Bengaluru, to alleviate traffic congestion and provide fast and efficient transportation (The Indian Express Journalism of Encourage, 2017).These projects show that tunneling technology continues to be a critical tool for meeting India's growing infrastructure needs in contemporary times.
A big project was constructed in the area in the Southeastern Anatolia region of Turkey, which includes the provinces of Adıyaman, Batman, Diyarbakır, Gaziantep, Kilis, Mardin, Siirt, Şanlıurfa, and Şırnak, defined as the "GAP Region" (Southeastern Anatolia Project) [119].The GAP "Southeastern Anatolia" project is one of the most significant water-based development projects in the world in terms of size and impact, and the largest integrated water resources project in Turkey.Irrigation systems and drainage requirements in the Tigris and Euphrates basins have been studied on a project-by-project basis as part of GAP.Numerous studies have been conducted to examine the water resources, irrigation systems, and water distribution methods based on the data and field observations collected during these studies in terms of current demands, as well as drainage requirements and systems, water control structures, covers, and efficient water use [119].This region, bordering Syria to the south and Iraq to the southeast, comprises 20% of Turkey's irrigable 8.5 million hectares of land and consists of large plains in the river basins of the lower Tigris and Euphrates rivers in the GAP region.Within GAP, 22 dams, 19 hydropower plants, and an area of 1,762,000 hectares have been planned for economically viable irrigated agriculture, with a total installed capacity of over 7476 megawatts and an annual electricity production of 27 billion kilowatt hours [119].One of these structures is the Şanlıurfa irrigation tunnel.The Şanlıurfa tunnels are located in the Southeast Anatolia region of Turkey.They consist of two parallel tunnels with a total length of 26.4 km, running from the Atatürk Dam reservoir to 5 km northeast of Şanlıurfa.The tunnels are among the longest irrigation tunnels in Turkey and worldwide.Construction began in 1981 and the tunnels, which are among the largest structures in the GAP, were planned to irrigate about 476,000 hectares of land, including about 358,000 hectares of land by gravity and 118,000 hectares of land by pumping.The water tunnels consist of two circular concrete-lined tunnels, each 7.62 m in diameter and 26.4 km long.The total length of the tunnels, including the transport and connecting tunnels, is 57.8 km.The water taken from the Atatürk reservoir through the tunnels, amounting to 328 m 3 /s, is to be transferred to the Harran and Mardin plains.In the system consisting of two parallel tunnels, the distance between the tunnels from axis to axis is 40 m.A connecting tunnel has been opened between the tunnels every 500 m so that the excavated material can be easily transported outside, and the excavation and concreting work can be carried out simultaneously.There are 52 connecting tunnels in total.Good ventilation is very important in such a long tunnel.For this purpose, the chimneys in the middle of the connecting tunnels were opened to supply both tunnels.There is a chimney approximately every 1500 m, the depth of which varies between 65.24 m and 207.95 m.The total number of stacks is 23.The tunnels are laid out according to the direction of water flow [120].
In Athens, the capital city of Greece, a contract was signed between the Greek Government, the Bank of Athens, and the American firm ULEN in 1952, for the financing and construction of the new water supply project.The first major work was the construction of the Marathon Dam (1926)(1927)(1928)(1929).The dam is 54 m high and 285 m long and it is considered unique because it is entirely paneled externally with Pentelikon white marble.The Boyati Tunnel, 13.4 km long, 2.6 m wide, and 2.1 m high, was constructed to transport water from the Marathon impounding reservoir to a new water treatment plant in Athens [8].In 1956, the water from the Yliki Lake was added to the system, and in 1981, the Mornos dam and aqueduct were inaugurated.The Mornos dam is one of the highest earth dams in Europe, with a height of 126 m.The Mornos aqueduct, which transports water from the Mornos reservoir to Athens, is the second longest aqueduct in Europe.It has a total length of 188 km, made up of 15 tunnels of 71 km in length and 3.2 m in diameter, 12 siphons (7 km), and 15 canals (110 km).The first time that a TBM was used in Greece for the excavation of the Gkiona Tunnel, 14.75 km in length [121].Finally, the last major work, which provided Athens with additional water in 2001, was the Evinos River diversion to the Mornos impounding reservoir, consisting of the Evinos Dam and a diversion tunnel.Works began on the Evinos in 1992 and were completed in 2001.The major structures of the project are a 120 m high earth-fill dam, with a dam volume of 12 million m3, a total barrage capacity of 120 million m 3 , and the 29.4 km long Evinos-Mornos tunnel, with a 4.2 m excavation diameter and a 3.50 m internal diameter [8].The tunnel is one of the longest hydraulic tunnels in the world realized using the TBM method.The adverse geological conditions, the high cover, and the short construction schedule were a great challenge for the successful construction of this tunnel [122].The tunnel was completed in just two years, which is considered to be a significant achievement given the project scale.The area covered by this major project is shown in Figure 23.
of the Marathon Dam (1926)(1927)(1928)(1929).The dam is 54 m high and 285 m long and it is considered unique because it is entirely paneled externally with Pentelikon white marble.The Boyati Tunnel, 13.4 km long, 2.6 m wide, and 2.1 m high, was constructed to transport water from the Marathon impounding reservoir to a new water treatment plant in Athens [8].In 1956, the water from the Yliki Lake was added to the system, and in 1981, the Mornos dam and aqueduct were inaugurated.The Mornos dam is one of the highest earth dams in Europe, with a height of 126 m.The Mornos aqueduct, which transports water from the Mornos reservoir to Athens, is the second longest aqueduct in Europe.It has a total length of 188 km, made up of 15 tunnels of 71 km in length and 3.2 m in diameter, 12 siphons (7 km), and 15 canals (110 km).The first time that a TBM was used in Greece for the excavation of the Gkiona Tunnel, 14.75 km in length [121].Finally, the last major work, which provided Athens with additional water in 2001, was the Evinos River diversion to the Mornos impounding reservoir, consisting of the Evinos Dam and a diversion tunnel.Works began on the Evinos in 1992 and were completed in 2001.The major structures of the project are a 120 m high earth-fill dam, with a dam volume of 12 million m3, a total barrage capacity of 120 million m 3 , and the 29.4 km long Evinos-Mornos tunnel, with a 4.2 m excavation diameter and a 3.50 m internal diameter [8].The tunnel is one of the longest hydraulic tunnels in the world realized using the TBM method.The adverse geological conditions, the high cover, and the short construction schedule were a great challenge for the successful construction of this tunnel [122].The tunnel was completed in just two years, which is considered to be a significant achievement given the project scale.The area covered by this major project is shown in Figure 23.[126].The project comprises three deeply dug tunnels, the longest of which is the 280 km long Kashuang Tunneltwice as long as the Delaware Aqueduct, the main channel supplying water to New York City.

Emerging Trends of Tunneling Aqueducts
Governments and municipal authorities, faced with the problems of providing infrastructure within and between densely populated megacities, have acknowledged the importance of tunnels for the installation of underground transport corridors, sewerage systems, and utilities.Nowadays, many tunnels are constructed with advanced mechanical TBMs that have been progressively replacing the older drill and blast methods.TBMs can excavate a full circular face to the diameter of the machine, typically from 2 to 12 m, at astonishingly rapid rates when rock mass conditions are excellent.Even so, and despite dramatic improvements in TBM technology [127,128] TBMs are still not good at coping with rapidly changing or poor geologic conditions that can delay or stop the machines, thus increasing risks and costs to the tunnel project [129].
Studies of tunnel projects in the United States [130] have demonstrated that predesign investigations along the tunnel route using geological mapping and core drilling from the surface can mitigate these risks and reduce costs.These direct exploration methods may be enhanced with appropriate geophysical techniques (e.g., electrical and seismic imaging) to investigate the interval between boreholes or in difficult or complex areas (e.g., [131,132]).These studies may benefit global underground engineering researchers for hazard prediction and in establishing early warning systems [133].In general, we are seeking to advance the application of geophysical methods to solve problems facing remediation professionals concerning fractured-rock aquifers.To this end, we (a) provide an overview of geophysical methods applied to the characterization and monitoring of fractured-rock aquifers; (b) review case studies showcasing different geophysical methods; and (c) discuss best practices for method selection and rejection based on synthetic modeling and decision support tools [134].
Emerging trends in tunneling aqueducts in India focus on sustainability, cost-effectiveness, and innovation.An interesting example of such trends is the use of micro-tunneling, a trenchless technology used to construct small-diameter tunnels for water supply and drainage systems (Indian Geotechnical Society).This technique has been utilized in the construction of the Ganga-Krishna-Pennar-Link Project, a massive water supply project aimed at transferring water from the Ganges and Godavari rivers to water-deficit regions in the southern part of the country.Another emerging trend is the use of pre-cast tunnel segments, which can be quickly and efficiently assembled on-site, reducing construction time and costs (NBM&CW).These segments have been used in the construction of the Mumbai Metro Line 3 tunnel, a massive underground rail project that will significantly improve transportation in the city.Overall, these emerging trends in tunneling aqueducts demonstrate how innovative technology and sustainable practices are being used to meet India's growing infrastructure needs.

Epilogue
It is obvious that the irrigation canals used in modern agriculture still follow the basic technical concepts used in ancient times for the construction of aqueducts.In the past, water sources were usually located outside the cities.Therefore, water was transported through open channels, tunnels, pipes made of various materials, and channels carved into rocks and covered with a lid.Water was transported either under pressure or using gravity in tunnels, galleries, and canals.In gravity conveyance, maintaining the head of the water is critical.In an open channel, gallery, or pipe, water flows freely according to gravity.Since there is no pressure or very little pressure as the elevation rises ahead of the waterway, the pipes are thin.For clay pipes, the thickness is 1-2 cm.In different regions, these pipes are called by different names, including "künk", "pöhrek", and "terracotta" (in Italian).
The "inverted siphon" method, also referred to in the literature as "reverse siphon", was historically used to cross valleys as an alternative to aqueducts.In certain cases, the inverted siphon and the aqueduct were built together, reducing the height of the arch to save costs.These pipelines were built using elements such as earth, stone, and lead.Aspendos in Attalya illustrates these practices: water was transported to the city's reservoir through two towers 65 m high, which were located 924 m apart from each other.Between these towers, there is a water channel, in ruins, 45.00 m high.In Aspendos, both a stone pipe network and an aqueduct were used.The siphon has a depth of about 20 m, and the diameter of the stone pipe is 30 cm.
The United Nations and other organizations encourage the revitalization of traditional water harvesting and supply technologies in arid areas because they consider it important for sustainable water utilization.A qanat as a tunneling system is a gently sloping subterranean conduit, which taps a water-bearing zone at a higher elevation than cultivated lands.It is used to provide a reliable supply of water to human settlements or for irrigation in hot, arid, and semiarid climates and allows the population to live in a desert area.A qanat system has a significant impact on the lives of water users, as it allows those living in a desert environment adjacent to a mountain watershed to create a large oasis in an otherwise stark environment.The advantages of transporting water underground in the qanat system are obvious, given that qanats are subterranean tunnels that tap the groundwater and lead the water entirely by gravity.As they are often dug into the hard subsoil and, when necessary, lined with relatively impermeable clay hoops, there is little seepage, no change in the water table, no water logging, and no evaporation during transit.The rate of water flow in a qanat is controlled by the level of the underground water table and it therefore exploits groundwater as a renewable resource.Thus, qanats are environmentally sustainable water harvesting and conveyance tunneling techniques through which groundwater can be obtained without causing damage to the tapped aquifer in arid regions ( [17,[135][136][137]).
The importance of the Kopais project, which was perceived by ancient Greeks, was also recognized in modern times; thus, the drainage of Kopais was among the first land reclamation projects carried out, during the second half of the 19th century, by the newly established Greek state.In this case, a tunnel and a network of ditches were created that sent the waters of the lake to an adjacent lake (Lake Yliki).Modern engineers went further, as they identified the peculiarity of the soil in the Kopais plain, which has an impermeable layer at a shallow depth (~2.00 m) and above it a layer of sand that is under the surface organic layer and a layer of marl.The impervious layer and the sand layer make it possible to apply subirrigation with the use of drainage ditches during the summer.Thus, a network of earthen ditches has been created that drain the area in the winter to Yliki Lake, and in the summer water from Yliki is pumped and led to the ditches.Initially, the system was designed wisely: a suitable level was kept in each ditch, and the plants were irrigated with the sub-irrigation system.Later, pumping with individual pumping stations and sprinkler irrigation was preferred, which is energy-consuming [35].
According to Sir Winston Leonard Spencer-Churchill (1874-1965), "the more you look back in the past, the more you see into the future".Furthermore, an analysis of ancient tunneling techniques and applications can provide many practical solutions invented in the past that can be applied in the modern world.Our ancestors had no access to engines and modern techniques, but they used simple, energy-saving means.Their inventions and practical applications can therefore find a place in a new, environmentally conscious, and energy-conservative world.
In conclusion, tunneling dates back to prehistoric times, with the use of hydrotechnology playing a critical role in creating sustainable systems in tunneling.Many ancient civilizations, such as the Ancient Egyptians, Greeks, Romans Persian, and others used tunnelling, from the simplest form of aqueducts, such as ditches cut into the earth, up to complex structures including horizontal and vertical tunnels.These tunnels were at a lower level than the reservoir and relied on a gravity hydraulic system for transferring and distributing water without employing any extra energy, which may cause negative impacts on the environment.From ancient water management systems to modern tunneling engineering, India has made significant strides in enhancing safety, minimizing costs, and reducing environmental impact.As India continues to invest in infrastructure, it is anticipated that it will make further strides in tunneling engineering, contributing to sustainable development in the country.

Figure 2 .
Figure 2. The Kish qanat: (a) the appearance and (b) view of the main tunnel.

Figure 4 .
Figure 4. Underground tunnels and reservoirs in the Harappan city of Dholavira: (a) the southern and (b) the eastern views [28].

Figure 4 .
Figure 4. Underground tunnels and reservoirs in the Harappan city of Dholavira: (a) the southern and (b) the eastern views [28].

Figure 8 .
Figure 8. Eupalinion orygma: (a) a view of the orygma and water channel, and (b) a frequently used entrance.

Figure 9 .
Figure 9. Eupalinos increased the possibility of the two tunnels (right and left sites) meeting each other: (a) in the horizontal plane and (b) in the vertical plane.

Figure 9 .
Figure 9. Eupalinos increased the possibility of the two tunnels (right and left sites) meeting each other: (a) in the horizontal plane and (b) in the vertical plane.

Figure 11 .Figure 11 .
Figure 11.Drainage tunnel of the Étang de Clausonne, France: (a) upstream entrance of the drainage tunnel, originally protected by a metal grille; (b) downstream aspect of the drainage tunnel (left) Figure 11.Drainage tunnel of the Étang de Clausonne, France: (a) upstream entrance of the drainage tunnel, originally protected by a metal grille; (b) downstream aspect of the drainage tunnel (left) built to make the Nîmes Roman aqueduct channel (right) pass below the Étang de Clausonne.Only the aqueduct tunnel has carbonate deposits.Water was flowing in opposite directions in the two tunnels.Sernhac, France (Photos Cees Passchier).

Figure 12 .
Figure 12.Spring tunnel of the Xanthos aqueduct, Turkey.The tunnel was partially dug into the rock and extended with ashlars and cover stones.The channel is deepened, leaving a footpath along the side for access: (a) inside, looking to the exterior; (b) inside, looking towards the spring; (c) exterior.The structure is still in use to provide water for irrigation.(d) Branching tunnel of Novalja, Croatia.The tunnel was bifurcated to access two springs (Photos Cees Passchier).

Figure 12 .
Figure 12.Spring tunnel of the Xanthos aqueduct, Turkey.The tunnel was partially dug into the rock and extended with ashlars and cover stones.The channel is deepened, leaving a footpath along the side for access: (a) inside, looking to the exterior; (b) inside, looking towards the spring; (c) exterior.The structure is still in use to provide water for irrigation.(d) Branching tunnel of Novalja, Croatia.The tunnel was bifurcated to access two springs (Photos Cees Passchier).

Figure 14 .
Figure 14.The meeting point between two excavation sections in several tunnels: (a) the Chelva tunnel, Spain, with horizontal offset.The view is towards the end of a section of the gallery that meets another one at the right-hand side (person visible).(b) A similar meeting point, with a major horizontal offset and small vertical offset, Chelva aqueduct.(c) The meeting point of the aqueduct tunnel of Tiermes, Spain, with a vertical offset.(d) Meeting point with vertical offset in the Sernhac tunnel of the Nîmes aqueduct.The tunnel has a flat roof because of the strong horizontal stratification (Photos Cees Passchier).

Figure 14 .
Figure 14.The meeting point between two excavation sections in several tunnels: (a) the Chelva tunnel, Spain, with horizontal offset.The view is towards the end of a section of the gallery that meets another one at the right-hand side (person visible).(b) A similar meeting point, with a major horizontal offset and small vertical offset, Chelva aqueduct.(c) The meeting point of the aqueduct tunnel of Tiermes, Spain, with a vertical offset.(d) Meeting point with vertical offset in the Sernhac tunnel of the Nîmes aqueduct.The tunnel has a flat roof because of the strong horizontal stratification (Photos Cees Passchier).

Figure 15 .
Figure 15.Water tunnels: (a) tunnel with a pear-shaped profile at Uxama, Spain.This tunnel was probably first dug as a narrow structure, represented by the top, but later widened in its lower part to lower the water level and make access for cleaning crews easier [87].(b) Tunnel of the Cahors aqueduct, Spain, where a tunnel was made narrower and trapezoidal by inserting wedge-shaped masses of mortar (Photos Cees Passchier).

Figure 16 .
Figure 16.Conduits built into an aqueduct tunnel: (a) Sernhac tunnel, France; a masonry channel was built into the tunnel for passage of the Nîmes aqueduct (Photo (a)-Cees Passchier).(b) Cave de Curée, with a vaulted aqueduct channel in the tunnel, part of the Gier aqueduct of Lyon, France-(www.romanaqueducts,accessed on 15 August 2023).

Figure 15 .Figure 15 .Figure 16 .
Figure 15.Water tunnels: (a) tunnel with a pear-shaped profile at Uxama, Spain.This tunnel was probably first dug as a narrow structure, represented by the top, but later widened in its lower part to lower the water level and make access for cleaning crews easier [87].(b) Tunnel of the Cahors aqueduct, Spain, where a tunnel was made narrower and trapezoidal by inserting wedge-shaped masses of mortar (Photos Cees Passchier).

Figure 16 .
Figure 16.Conduits built into an aqueduct tunnel: (a) Sernhac tunnel, France; a masonry channel was built into the tunnel for passage of the Nîmes aqueduct (Photo (a)-Cees Passchier).(b) Cave de Curée, with a vaulted aqueduct channel in the tunnel, part of the Gier aqueduct of Lyon, France-(http://www.romanaqueducts.info/,accessed on 15 August 2023).

Figure 17 .Figure 18 .
Figure 17.Constructions improving the shape of aqueduct tunnels: (a) masonry wall section in a tunnel where the sidewall was broken out.Traconnade aqueduct of Aix-en-Provence (France).(b) A vault structure over a tunnel that was dug from the top and then closed with a vault.Traconnade aqueduct, quarry of Santa Anna, Peyrolles.This tunnel is visible in profile, since it was later cut by a quarry.(c) Bullica tunnel, a maintenance tunnel of the Marcia aqueduct, with access shafts to the narrow aqueduct tunnel that runs at a deeper level.The metal bars are modern, but in ancient times a wooden beam would have been placed above the shaft to allow workers to descend and clean (Photos Cees Passchier).

Figure 17 .Figure 17 .Figure 18 .
Figure 17.Constructions improving the shape of aqueduct tunnels: (a) masonry wall section in a tunnel where the sidewall was broken out.Traconnade aqueduct of Aix-en-Provence (France).(b) A vault structure over a tunnel that was dug from the top and then closed with a vault.Traconnade aqueduct, quarry of Santa Anna, Peyrolles.This tunnel is visible in profile, since it was later cut by a quarry.(c) Bullica tunnel, a maintenance tunnel of the Marcia aqueduct, with access shafts to the narrow aqueduct tunnel that runs at a deeper level.The metal bars are modern, but in ancient times a wooden beam would have been placed above the shaft to allow workers to descend and clean (Photos Cees Passchier).

Figure 19 .
Figure 19.Tagliata Etrusca, Ansedonia.A tunnel and gallery cut into the rock to modify currents in the harbor of Cosa, meant to avoid silting (Photo Cees Passchier).

Figure 19 .
Figure 19.Tagliata Etrusca, Ansedonia.A tunnel and gallery cut into the rock to modify currents in the harbor of Cosa, meant to avoid silting (Photo Cees Passchier).

Figure 20 .
Figure 20.Tunnels related to gold exploration: (a) Tunnel of Montefurado, dug to change the course of the river Sil for gold exploration.(b) Water tunnels in Las Medulas, Spain.At the top, one of the original tunnels dug for "fracking" the conglomerate; at the bottom, one of the larger washed-out tunnels.(c) Typical wash-out tunnel of the Las Medulas system.(d) Tunnel fragments are left in a pillar of conglomerate, while the surrounding area has been mined; Montefurado, Spain (Photos Cees Passchier).

Figure 20 .
Figure 20.Tunnels related to gold exploration: (a) Tunnel of Montefurado, dug to change the course of the river Sil for gold exploration.(b) Water tunnels in Las Medulas, Spain.At the top, one of the original tunnels dug for "fracking" the conglomerate; at the bottom, one of the larger washed-out tunnels.(c) Typical wash-out tunnel of the Las Medulas system.(d) Tunnel fragments are left in a pillar of conglomerate, while the surrounding area has been mined; Montefurado, Spain (Photos Cees Passchier).

Figure 21 .
Figure 21.Map showing the locations of cisterns and water channels in Constantinople[97].

Figure 21 .
Figure 21.Map showing the locations of cisterns and water channels in Constantinople [97].

Figure 23 .Figure 23 .
Figure 23.Schematic representation of the Athens water supply system in modern times [123].In the contemporary time the hydrological tunneling has increased significantly in both size and number.A few more examples, indicating their size, are the following: (a) The Delaware aqueduct in the New York City water supply system.It was constructed between 1939 and 1945 and carries approximately half of New York City's water supply of 4,900,000 m 3 /d.At 4.10 m wide and 137 km long, the Delaware Aqueduct is the world's longest tunnel.It takes water from the Rondout, Cannonsville, In the contemporary time the hydrological tunneling has increased significantly in both size and number.A few more examples, indicating their size, are the following:(a) The Delaware aqueduct in the New York City water supply system.It was constructed between 1939 and 1945 and carries approximately half of New York City's water supply of 4,900,000 m 3 /d.At 4.10 m wide and 137 km long, the Delaware Aqueduct is the world's longest tunnel.It takes water from the Rondout, Cannonsville, Neversink, and Pepacton reservoirs on the west bank of the Hudson River through the Chelsea Pump Station, then into the West Branch, Kensico, and Hillview reservoirs on the east bank, ending at Hillview in Yonkers, New York [124].(b) The Metropolitan Area Outer Underground Discharge Channel is an underground water infrastructure project in Kasukabe, Saitama, Japan.It is the world's largest underground flood water diversion facility, built to mitigate the overflowing of the city's major waterways and rivers during rain and typhoon seasons [125].It is located between Showa and Kasukabe in Saitama prefecture, on the outskirts of the city of Tokyo in the Greater Tokyo Area.Construction started in 1992 and was completed by early 2006.(c) In China, a secretive 500 km long irrigation project being built to divert snowmelt from the Altay Mountains to desert areas in its restive Xinjiang region has developed a too-much-of-a-good-thing problem.Workers keep tapping into gushing flows of groundwater, which has slowed construction to a crawl.It was based in part on the 2000-year-old karez system designed by Uyghurs in Turpan, and China began constructing the 514 km long project years ago, in what is reportedly the longest underground irrigation canal system in the world