A Comprehensive Assessment and Classification of Acute Lymphocytic Leukemia

: Leukemia is a form of blood cancer that results in an increase in the number of white blood cells in the body. The correct identification of leukemia at any stage is essential. The current traditional approaches rely mainly on field experts’ knowledge, which is time consuming. A lengthy testing interval combined with inadequate comprehension could harm a person’s health. In this situation, an automated leukemia identification delivers more reliable and accurate diagnostic information. To effectively diagnose acute lymphoblastic leukemia from blood smear pictures, a new strategy based on traditional image analysis techniques with machine learning techniques and a composite learning approach were constructed in this experiment. The diagnostic process is separated into two parts: detection and identification. The traditional image analysis approach was utilized to identify leukemia cells from smear images. Finally, four widely recognized machine learning algorithms were used to identify the specific type of acute leukemia. It was discovered that Support Vector Machine (SVM) provides the highest accuracy in this scenario. To boost the performance, a deep learning model Resnet50 was hybridized with this model. Finally, it was revealed that this composite approach achieved 99.9% accuracy.


Introduction
Leukemia is a form of blood cancer [1] that results in an increase in the number of white blood cells in the body.Whenever these white cells force away the red blood cells and platelets that the human body need to function correctly, the chances of having this disease increase.It is a diverse category of hematopoietic cancers caused by abnormal multiplication of growing leukocytes.These are categorized as acute or chronic and myeloid or lymphoid depending on the originating cell.The most common variants are acute myeloid leukemia (AML) and chronic myeloid leukemia (CML), both of which include the myeloid branch.The excessive production of red blood cells, white blood cells, or platelets by the bone marrow characterizes disorders of these myeloid origins.As more excess cells accumulate in the bone marrow or blood, it frequently becomes worst with time.A viral infection, exhaustion, anemia, hemorrhage issues, and other complications could result from this [2,3].
However, acute lymphoblastic leukemia (ALL) and chronic lymphocytic leukemia (CLL), both of which involve the lymphoid sequence.Cells that develop into lymphocytes or white blood cells are the source of the lymphocytic leukemia stream.In simple terms, its cancerous cells are found in blood and bone marrow, respectively.The most prevalent type of leukemia malignancy that affects adults is called CLL.Despite the fact that it can strike grownups, ALL mainly affects adolescents [4,5].
It was estimated that in 2020 that there roughly 500,000 new cases of leukemia were found globally.Globally, there was an approximately five-fold fluctuation in the agestandardized prevalence of occurrence, which was reported to be 5.4 per 100,000.The number of linked deaths reported in 2020 was nearly 350,000 in the context of death rates.Leukemia-related mortality varied less by region globally.Most parts of Asia, Europe, America, Australia, and New Zealand recorded death rates between 2.5 and 4.0 per 100,000 people [6][7][8].The worldwide cancer research organization revealed that by 2023, there would be 2.4 additional instances per 100,000 people, and the fatality rate will be increased to between 1.4 and 1.8 per 100,000 people.According to reports, the total percentage of survivors increased by more than 70% during the preceding five years due to the use of contemporary medical advances [9,10].
In this investigation, acute lymphoblastic leukemia (ALL) was used as the research subject.Microscopic image analysis is very important in early leukemia testing and accurate diagnoses for this illness [11].This analysis describes how testing blood sample appears under a microscope, including the size of blood cells, shape, and the amounts of different types of blood cells, including red blood cells, white blood cells, and platelets.
The correct identification of leukemia at any stage is essential.Since current traditional approaches rely mainly on microscopic inspection, which itself is time-intensive and highly dependent on field experts' knowledge, it is possible that a poor understanding and a long period of examination might damage the human body.In this situation, an automated leukemia identification provides a new avenue for reducing human participation while delivering more reliable diagnostic information.ALL prediction is a challenging process.Normal physical examinations and information gathered from groups of specimens are time-dependent and money-consuming methods for identifying and predicting leukemia.The condition has occasionally been seen to advance from the premature time to noticeably greater levels due to an inadequate evaluation.In contrast to general medical inspection, digital image analysis is now more successful at identifying this condition.The medical community greatly benefits from ML.It is a technology utilized by the medical industry to assist medical practitioners in managing critical data and delivering clinical outcomes.Finding patterns and insights from a picture that would be hard to detect intuitively can be assisted by employing ML techniques used in healthcare.In contrast to conventional methods, ML models offer a forecast that is reliable and efficient in terms of effectiveness, cost, and time.
In this work, a hybrid learning methodology is employed to build an automated leukemia monitoring system.This technique will analyze blood smear images for the existence of leukemia.During the initial phase, three well-known single learning models are employed to predict ALL categories.The best single learning model discovered in the first phase is fused with a deep neural model network in the following phase to improve model forecasting accuracy.The relevance of this work is highlighted below: 1.
To assess and forecast the type of leukemia, an automated technique is developed; 2.
A DL model called Resnet50 is used to acquire characteristics, and an ML model called SVM is used to classify data in order to establish this technique; 3.
This system uses digital blood smear images for detection and prediction; 4.
The constructed smart strategy uses known sets of information to forecast and monitor the form of Leukemia; 5.
Whenever it detects a potentially malicious blood cell, this automatic system will send an alarm; 6.
This approach is significantly more precise and faster than traditional techniques.

Literature Survey
In this section, the scientific research related to the inquiry is comprehensively assessed.The suggested process investigated how to detect and classify acute lymphoblastic leukemia.As a result, a comprehensive review focusing on the mentioned principles, as well as an overview of the associated literary work, is offered below.
Blood cancer [12] has become an increasing problem in recent decades, necessitating earlier detection in order to commence appropriate treatment.The therapeutic diagnosis process is expensive and time-consuming, requiring the participation of healthcare professionals and a series of examinations.As a result, an automatic detection method for precise prognosis is far more important than the conventional approach.With the advent of technology, finding abnormal cells from blood smear images has become considerably easier, even more reliable, and significantly less time consuming than the traditional approach.Many scientists and researchers throughout the worldwide have focused on developing progressively inventive and accurate ways for such systems and related solutions for these scenarios.
Various investigators employ a variety of computer vision approaches for identification and machine learning models for prediction.To identify the kind of leukemia from blood smear pictures, they adopted a support vector system based on radial kernels [13].To identifying the characteristics of these cancerous cells, other studies also employed a few different ML models [14][15][16].Several ML-based models for leukemia detection and classification are presented in depth by the authors in their review paper.They provide as a concise summary of various performance metrics, benefits, and drawbacks of several related studies that will be informative for other authors [17,18].
Modern society is very interested in deep learning models.These algorithms are capable of processing complicated and huge datasets that would be challenging for conventional ML methods to comprehend.A technique for leukemia diagnosis using labeled bone marrow pictures was put forth by certain researchers.In order to deliver trustworthy prediction performance, they employed a strong classification methodology using the deep convolutional model approach [19][20][21][22].A deep convolution model with a distinct ALLNET structure was suggested by some other authors for forecasting.The suggested framework has the maximum level of precision [23].Several authors have suggested a multi-step DL strategy.They used this strategy to effectively separate the cells from the pictures and make reliable predictions [24].
A brief literature analysis is illustrated in Table 1.

Methods Details
Leukemia is a kind of cancerous disease that affects blood production elements, particularly bone marrow.In therapeutic terminology, there are several distinct examinations are available that may be employed to detect leukemia.The amounts of white blood cells (WBCs), red blood cells (RBCs), and platelets in the bloodstream are determined by a complete blood count.Cell examinations can be carried out from the bone marrow or lymphatic vessels to search for signs of leukemia and the rate at which it is growing.However, it takes time and requires skilled medical specialists.Numerous computer vision algorithms are employed in Digital Image Processing Techniques for the identification of leukemia.To locate disease-affected tissues, different color intensification and color segmentation approaches were used in this investigation.

Brightness, Contrast, Sharpness, and Color Intensity Enhancement
In machine vision, brightness [33] is defined as the measurable amplitude of all the image pixels that compose an assembly that made up the digital picture once it has been taken, processed, and presented.To modify the intensity of the brightness of an image, the image pixel intensities should be adjusted by a fixed value.Simply adding a positive fixed value to all the image pixels increases the brightness level of the image.Deducting a positive number from all the picture pixels, on the other hand, darkens the image.

Adjustment Brightness =
Brighter when Pixel value + K Darker when Pixel value − K where K = a constant value for brightness adjustment.Improving the contrast [33] level of an image improves the range between black and white pixels, making white parts lighter and black ones darker.It simply redesigned the pictures pixel intensity values.A well-contrasted photograph features prominently black and white distinctions.

Adjustment Contrast =
Dark when Pixel value + M White when Pixel value − M where M = a constant value for contrast enhancement.
The degree of clarity that an imaging modality can recreate is determined by the sharpness [34] of a picture.It is characterized by the margins between distinct hues or colors in each region.Image sharpening is a technique used to make digitized photos look sharper or clearer.It is a crucial tool in the image processing system.Appropriate sharpening of an image makes it appear more noticeable and livelier.Figure 1 shows the definition of sharpness level graphically.
it takes time and requires skilled medical specialists.Numerou rithms are employed in Digital Image Processing Techniques for kemia.To locate disease-affected tissues, different color intensific tation approaches were used in this investigation.

Brightness, Contrast, Sharpness, and Color Intensity Enhancemen
In machine vision, brightness [33] is defined as the measura image pixels that compose an assembly that made up the digital taken, processed, and presented.To modify the intensity of the the image pixel intensities should be adjusted by a fixed value.S fixed value to all the image pixels increases the brightness level o positive number from all the picture pixels, on the other hand, da where K = a constant value for brightness adjustment.Improving the contrast [33] level of an image improves the r white pixels, making white parts lighter and black ones darker.pictures pixel intensity values.A well-contrasted photograph fea and white distinctions.During analysis, an image enhancement approach is emplo age's appearance and save the informative characteristics of the o mentation is an important aspect of it.This approach is a set of During analysis, an image enhancement approach is employed to increase the image's appearance and save the informative characteristics of the original data.Color augmenta-tion is an important aspect of it.This approach is a set of processes that strive to improve the visual look of a picture or transform the picture to a state that is more suitable for analysis by a person or computer.This procedure also included brightness and contrast adjustments, as well as histogram equalization adjustments.

Image Segmentation
Image segmentation is a technique [35,36] used in digital image processing.It analyzes a picture and divides it into distinct segments or sections based on the pixels in the object's attributes.It is widely used to discern and properly identify foreground and background areas.
An image can be segmented using several different techniques.One of these, the thresholding-based segmentation method [37], is both fast and significant.The intensity histogram of each pixel in the image is considered throughout this approach.After that, a specific threshold value is set to segment the image.Global thresholding is one of the most well-liked techniques for segmenting images based on thresholds.The idea behind global thresholding is that the subject can be separated from the background using a straightforward process that compares image contents with a predetermined threshold value when the image has a bimodal histogram.Figure 2 depicts the histogram distribution of the global thresholding model.

Image Segmentation
Image segmentation is a technique [35,36] used in digital im lyzes a picture and divides it into distinct segments or sections ba object's attributes.It is widely used to discern and properly identif ground areas.
An image can be segmented using several different techniq thresholding-based segmentation method [37], is both fast and si histogram of each pixel in the image is considered throughout this specific threshold value is set to segment the image.Global thresho well-liked techniques for segmenting images based on thresholds.thresholding is that the subject can be separated from the backgro ward process that compares image contents with a predetermined the image has a bimodal histogram.Figure 2 depicts the histog global thresholding model.Let us consider (, ) to be the coordinate of an image pixel, of an image is defined as ℎℎ.Then, the threshold image ( lows: The result of the thresholding approach is a binary image.Th sity value of 1 are specified as foreground objects, and pixels with are specified as background objects.

Feature Selection
To develop a ML model, only a few variables in the dataset result, the remaining features either become unnecessary or irrelev Let us consider (m, n) to be the coordinate of an image pixel, and the threshold value of an image is defined as Thresh.Then, the threshold image T(m, n) is defined as follows: The result of the thresholding approach is a binary image.The pixels with an intensity value of 1 are specified as foreground objects, and pixels with an intensity value of 0 are specified as background objects.

Feature Selection
To develop a ML model, only a few variables in the dataset play a main role.As a result, the remaining features either become unnecessary or irrelevant.Finding and choosing the best characteristics from the dataset is very crucial for reducing this redundancy and improving predictive accuracy.A feature is a characteristic that affects or helps researchers to solve a problem, and selecting the key characteristics for the model is referred to as feature selection.
For feature selection [38], typically, two models-one supervised and the other unsupervised-are considered.Supervised feature selection approaches are employed when the dataset is categorized and aids researchers in finding the pertinent features to improve the model's efficacy.This is the main justification for using a supervised feature selection model in this research.One of the broadly used supervised feature selection techniques is the histogram-oriented gradient approach [39].In the confined area of an image, this process counts instances of gradient direction.It concentrates on an object's structure and extracts the information from it.By employing the gradient's dimensions and orientation to create histograms, it collects the characteristics from those areas of the image.If g x and g y are the gradient of a pixel of an image I, then it is calculated as follows: And the magnitude of that pixel is represented as follows:

Machine Learning Models for Classification
ML [40] is a type of artificial intelligence.It concentrates mostly on developing algorithms that allow a computer to autonomously learn from available knowledge and prior experiences.The identification of correlations from given knowledge is one of the objectives of a machine learning model.The patterns are then discovered from the training data using a learning algorithm, which creates a model that recognize the patterns and forecasts the results of new data.
Depending on the kind and characteristics of the task, three different types of machine learning models are available: (1) supervised, (2) unsupervised, and (3) reinforcement.The most straightforward one is the supervised model.It is mostly applied to training data with label information.The input-output combination principle explains how it functions.It is important to create an operation that can be trained using a learning set of data before being used on selections of unidentified data to execute forecasting.The effectiveness of supervised learning is evaluated using sets of labeled data.Three supervised ML models-Support Vector Machine (SVM), K-Nearest Neighbor (KNN), and Naïve Bayes (NB)-are employed to carry out this investigation.These three models are widely used and effective for multi-class classification problems.
The SVM [41] method aims to generate a decision boundary that can characterize the n-dimensional space.Depending on that, it can quickly classify the latest data point.The term "hyperplane" refers to this optimal decision threshold.This approach generates the extreme vectors or points that assist in the formation of this hyperplane.Support vectors are referred to as these extreme points.Whenever there is a distinct line distinguishing the classes, it functions much as intended.SVM becomes a potent tool to create forecasts for all the data that cannot be characterized by linear decision functions.In addition to using relatively low memory, it works well in high-dimensional spaces.
The KNN [42] model is a highly straightforward and efficient learning approach.By placing the new case in the category that closely resembles the currently accessible categories, it assumes that the new instances and existing instances are alike.Every new instance is categorized based on these similarities after the system stores all the existing information.In other words, when data appear, this algorithm can quickly classify the new information into a suitable category.
Naïve Bayes [43] is a simplistic learning algorithm.It makes predictions using Bayes principles.It is termed Naïve since it is dependent on the assumption of conditional probability.Since it operates independently with each characteristic, it may be employed for big datasets to create forecasting models.It is particularly sensitive to other aspects, which indicates that it is not significantly affected by other components due to its Naïve characteristic.

Hybrid Approach
The hybrid approach [44] is a combination of two or even more computational approaches that outperform any single approach.It aids in the improvement of data analysis.The advantage of implementing this approach is that it improves performance by increasing model effectiveness.The DL and ML models are integrated to carry out this study.In order to categorize the input photos depending on these deep characteristics, the deep neural model first extracts these characteristics from the input images.Then, the ML model is employed to classify the images based on these features.The extraction of deep features makes this hybrid approach particularly effective.The deep features gathered all the essential data for classification and performed considerably better than any generative model.Figure 3 provides an illustration of the proposed hybrid approach preferred for this study.
Math.Comput.Appl.2024, 29, x FOR PEER REVIEW study.In order to categorize the input photos depending on these deep characteris deep neural model first extracts these characteristics from the input images.Then, model is employed to classify the images based on these features.The extraction features makes this hybrid approach particularly effective.The deep features gath the essential data for classification and performed considerably better than any ge model.Figure 3 provides an illustration of the proposed hybrid approach prefe this study.

Proposed Methodology
Leukemia is a kind of blood cancer that is in its initial phases.At this point, re cells are diminishing, while the white blood cells are developing.In this situat digital image of the blood cells can be made, it will be discovered that the amount blood cells is significantly greater than the proportion of true blood cells.Such a non-blood cell occurrences and counting the numbers can be used to determine w an individual has leukemia.To identify if a person has leukemia, wide varieties of evidence, hematological and bone marrow observations, and outcomes of more ized definitive tests studies are required.These procedures are both time-consum expensive.Therefore, in response to these concerns, this study describes a stra forecasting leukemia using digital image evaluation.
To assess and anticipate these digital photos, the following procedures were taken: (1) detection and (2) identification.Figure 4 depicts the prediction process ically.

Proposed Methodology
Leukemia is a kind of blood cancer that is in its initial phases.At this point, red blood cells are diminishing, while the white blood cells are developing.In this situation, if a digital image of the blood cells can be made, it will be discovered that the amount of non-blood cells is significantly greater than the proportion of true blood cells.Such aberrant non-blood cell occurrences and counting the numbers can be used to determine whether an individual has leukemia.To identify if a person has leukemia, wide varieties of clinical evidence, hematological and bone marrow observations, and outcomes of more specialized definitive tests studies are required.These procedures are both time-consuming and expensive.Therefore, in response to these concerns, this study describes a strategy for forecasting leukemia using digital image evaluation.
To assess and anticipate these digital photos, the following procedures were undertaken: (1) detection and (2) identification.Figure 4 depicts the prediction process graphically.
study.In order to categorize the input photos depending on these deep char deep neural model first extracts these characteristics from the input images.model is employed to classify the images based on these features.The extra features makes this hybrid approach particularly effective.The deep feature the essential data for classification and performed considerably better than a model.Figure 3 provides an illustration of the proposed hybrid approach this study.

Proposed Methodology
Leukemia is a kind of blood cancer that is in its initial phases.At this po cells are diminishing, while the white blood cells are developing.In this digital image of the blood cells can be made, it will be discovered that the am blood cells is significantly greater than the proportion of true blood cells.non-blood cell occurrences and counting the numbers can be used to deter an individual has leukemia.To identify if a person has leukemia, wide varie evidence, hematological and bone marrow observations, and outcomes of ized definitive tests studies are required.These procedures are both time-co expensive.Therefore, in response to these concerns, this study describes forecasting leukemia using digital image evaluation.
To assess and anticipate these digital photos, the following procedure taken: (1) detection and (2) identification.Figure 4 depicts the prediction p ically.

Detection Process
The fundamental and, perhaps, most successful approach for identifyin to count the amounts of white blood cells, platelets, and red blood cells in a p Medical testing research revealed that the non-blood cells detected in leuk

Detection Process
The fundamental and, perhaps, most successful approach for identifying leukemia is to count the amounts of white blood cells, platelets, and red blood cells in a person's blood.Medical testing research revealed that the non-blood cells detected in leukemia patients' blood are substantially darker than natural blood cells.This color contrast [45] principle may now be used to locate leukemia cells by examining a digital picture.
This study employed a machine vision technique to identify leukemia from digital pictures.It has been noted that appropriate non-blood cells are often difficult to detect due to low image clarity and details.To correctly identify leukemia from blood smear pictures, the affected cells had to be precisely distinguished.This was one of the most crucial procedures.To address this issue, a considerable pre-processing procedure was implemented in this study.This pre-processing procedure consisted of four stages: (1) equalizing the color intensity level, increasing the contrasting level, and sharpening the objects' boundaries to make the impacted cells more visible; (2) using the color clustering model to detect the cell boundaries; (3) applying the morphological operators to segment the appropriate regions; and (4) enumerating the damaged cells.

Identification Process
The procedure of predicting acute leukemia is difficult.The identification and prediction of leukemia through standard physical evaluations, as well as the way of gathering information from collective samples, are both time-consuming and expensive.In the case of a lack of an adequate diagnosis, the disease has been known to progress from the early stage to considerably higher levels at times.As a result, the patient's life might be jeopardized.
However, diagnosing this condition through digital image evaluation is more effective than conventional healthcare examination.This procedure is considerably more significant, requires less time, is much less expensive, and is far more precise than the conventional one.This investigation employed machine learning and fusion learning methods to detect leukemia from digital images.One of the benefits of employing these learning techniques is their ability to rapidly and precisely detect the type of condition.
To carry out this investigation, first, three well-known single learning models were utilized.The best model was selected among them based on its precision.In order to boost the effectiveness of the forecasting model, the selected model was paired with a deep convolution system Resnet50 [46,47].
A complete workflow structure and pseudo-algorithm of the proposed model is illustrated in Figure 5, and the pseudo-codes for the proposed model are illustrated in Algorithms 1-3.

Dataset Details
Image Samples for this investigation were gathered from the Kaggle library [48].This collection included 3256 blood smear pictures from 89 people who were thought to have acute lymphocytic leukemia.The bone marrow research lab at Taleqani Hospital generated the samples for this collection.The collection is categorized into two primary classes-'Benign' and 'Malignant-and three additional malignant classes-'Early', 'Pre', and 'Pro'.Figure 6 illustrates the distribution of images across all categories.

Dataset Details
Image Samples for this investigation were gathered from the Kaggle lib collection included 3256 blood smear pictures from 89 people who were th acute lymphocytic leukemia.The bone marrow research lab at Taleqani H ated the samples for this collection.The collection is categorized into two ses-'Benign' and 'Malignant-and three additional malignant classes-'Ea 'Pro'.Figure 6 illustrates the distribution of images across all categories.

The Outcome of Leukemia Detection
The results of leukemia identification from blood smudge images are ure 7.In the identification process, a number of algorithms based on comput employed to recognize the non-blood components.The detailed description in this procedure are provided in the illustrations beneath.

The Outcome of Leukemia Detection
The results of leukemia identification from blood smudge images are shown in Figure 7.In the identification process, a number of algorithms based on computer vision were employed to recognize the non-blood components.The detailed descriptions of each stage in this procedure are provided in the illustrations beneath.

Dataset Details
Image Samples for this investigation were gathered from the Kaggle library [48].This collection included 3256 blood smear pictures from 89 people who were thought to have acute lymphocytic leukemia.The bone marrow research lab at Taleqani Hospital generated the samples for this collection.The collection is categorized into two primary classes-'Benign' and 'Malignant-and three additional malignant classes-'Early', 'Pre', and 'Pro'.Figure 6 illustrates the distribution of images across all categories.

The Outcome of Leukemia Detection
The results of leukemia identification from blood smudge images are shown in Figure 7.In the identification process, a number of algorithms based on computer vision were employed to recognize the non-blood components.The detailed descriptions of each stage in this procedure are provided in the illustrations beneath.

The Outcome of Leukemia Identification
There are two stages in the leukemia prediction method.Three well-known machine learning processes are employed during the first stage.The specifications for each model prior to the training procedure are shown in Table 2.The effectiveness levels of the three single learning models that have been proposed are represented in Table 3.The effectiveness levels of the models were assessed using the following metrics: model accuracy, area under the curve (AUC), the rate of true positives (TPR), the rate of false negatives (FNR), the positive predicted value (PPV), and the false detection rate (FDR).The highestscoring model is chosen from stage one based on these performance benchmarks.The receiver waveform evaluation (ROC) for the top model is illustrated in Figure 8.In the following step, a deep residual network is constructed to retrieve deep features, and the best predictive model from stage one is used for classification.The performance of this hybrid strategy is displayed in Table 4, and the receiver curve evaluation of each classification category is illustrated in Figure 9.

Discussions and Limitations
One of the main issues involved in assisting in and extending life is leukemia recog nition at a preliminary phase.Therefore, creating a reliable detection method is one of th most significant priorities.Leukemia assessment and forecasting have proven to be cha lenging and time-consuming tasks based on traditional therapeutic approaches.Predi tion using ML algorithms using just a digital blood smear image has become incredibl successful and efficient as a result of the high popularity of AI and ML in the medica industry.The major goal of this work is to create a framework that precisely forecas acute lymphoblastic leukemia (ALL).Predicting ALL at its earliest stages is necessary t prevent it from spreading too widely.The integration of AI, ML, and DL into all of thes domains has become crucial since they accelerate and automate the forecasting procedur Several researchers have employed ML and DL in various ways to predict leukemi In the majority of scenarios, individual or combined neural networks for DL models an individual or ensemble learners for ML models are employed for forecasting.In thos instances, it has been discovered that the efficacy of a truly positive forecasting rate compromised as a result of insignificant characteristics, an inadequate pre-processing pro

Discussions and Limitations
One of the main issues involved in assisting in and extending life is leukemia recog nition at a preliminary phase.Therefore, creating a reliable detection method is one of th most significant priorities.Leukemia assessment and forecasting have proven to be cha lenging and time-consuming tasks based on traditional therapeutic approaches.Predic tion using ML algorithms using just a digital blood smear image has become incredibl successful and efficient as a result of the high popularity of AI and ML in the medica industry.The major goal of this work is to create a framework that precisely forecast acute lymphoblastic leukemia (ALL).Predicting ALL at its earliest stages is necessary t prevent it from spreading too widely.The integration of AI, ML, and DL into all of thes domains has become crucial since they accelerate and automate the forecasting procedure Several researchers have employed ML and DL in various ways to predict leukemia In the majority of scenarios, individual or combined neural networks for DL models an individual or ensemble learners for ML models are employed for forecasting.In thos instances, it has been discovered that the efficacy of a truly positive forecasting rate i compromised as a result of insignificant characteristics, an inadequate pre-processing pro

Discussions and Limitations
One of the main issues involved in assisting in and extending life is leukemia recognition at a preliminary phase.Therefore, creating a reliable detection method is one of the most significant priorities.Leukemia assessment and forecasting have proven to be challenging and time-consuming tasks based on traditional therapeutic approaches.Prediction using ML algorithms using just a digital blood smear image has become incredibly successful and efficient as a result of the high popularity of AI and ML in the medical industry.The major goal of this work is to create a framework that precisely forecasts acute lymphoblastic leukemia (ALL).Predicting ALL at its earliest stages is necessary to prevent it from spreading too widely.The integration of AI, ML, and DL into all of these domains has become crucial since they accelerate and automate the forecasting procedure.
Several researchers have employed ML and DL in various ways to predict leukemia.In the majority of scenarios, individual or combined neural networks for DL models and individual or ensemble learners for ML models are employed for forecasting.In those instances, it has been discovered that the efficacy of a truly positive forecasting rate is compromised as a result of insignificant characteristics, an inadequate pre-processing procedure, and the improperly tuning of the categorization system.
An integrated model that combines ML and DL is created in this study to address these problems.Here, a DL model Resnet50 is employed to gather important deep characteristics that aid with creating a suitable features model for categorization.Resnet50, or residual learning, used to collect the residual characteristics compared to the specific characteristics.Furthermore, since it has 50 layers, it was able to extract greater amounts of residual information from the source images.To categorize the deep characteristics, SVM, a ML method, is used in this study.The main benefits of employing SVM are that it clearly separates the distinct classes with clear margins, is reasonably memory-efficient, and works efficiently in high-dimensional spaces.In light of these factors, the SVM model predicts leukemia with deep characteristics more effectively.Table 5 presents a comparative approach that highlights the advantages of utilizing the suggested approach in terms of effectiveness.The following real-world cases can benefit from using this automated decision-making method, depending on the predicted outcome:

1.
This technique can be useful in the healthcare field since it allows doctors to effortlessly and precisely diagnose leukemia in its early stages.As a result, it offers a trustworthy option for beginning early treatment and reducing the severity of mortality situations.2.
To identify threatening non-blood cells, the color clustering strategy for monitoring is a very trustworthy and effective technique.This automated technique aids with analyzing the development of these non-blood cells so that the seriousness of this illness can be alerted upon reaching a benchmark.

3.
The hybrid approach for determining the kind of acute leukemia also presents a successful and efficient method.Unlike the typical ML paradigm, this method integrated both ML and DL strategies.The DL method extracts the deepest characteristics from the images.This hybrid strategy has this as one of its main advantages.These indepth features allowed the ML classification model to outperform any single learning methods in terms of effectiveness.

4.
It has been found that the Resnet50 strategy for deep feature extraction and the SVM strategy for machine learning surpass all other hybrid models in terms of performance.This combined strategy offers accuracy levels exceeding 99%.
Despite achieving above 99% accuracy, this automated identification and prediction approach still has several boundaries:

•
RGB picture format should be used for the input variable.Failure to do so will result in improper cluster operation.• The quality of the picture must be high; otherwise, deep feature collection and detection will be impacted.• The dataset should have a sufficient number of photos to enable improved predictions.
• To attain dependable effectiveness in classification, machine learning models necessitate substantial quantities of better-quality data.Thus, it is crucial to collect data for ALL.Biased or inadequate inputs might cause problems with adaptation and lower the desired efficiency of the models.In this article, a combined strategy is applied.The deep learning model applied is to the extraction of deep characteristics.So, the feature values also impact the efficiency of classification if the quality of the image degrades.

Conclusions
A form of blood cancer called leukemia produces a huge amount of abnormal blood cells and typically starts inside the bone marrow.As of today, four different forms of leukemia have been identified.One of the regular types of leukemia is ALL.Due to the rapid growth and build-up of malignant cells in ALL, timely medical attention is necessary.The traditional procedure, which includes blood test examination, genealogy research, and frequent medication, requires an extensive amount of time, and the results may not always be good.When a sickness was not properly diagnosed, it could potentially spread so quickly that it reached a very dangerous level.Artificial intelligence and machine learning are particularly helpful for resolving these challenges.This automated procedure is incredibly efficient and effective at both identifying non-blood cells and predicting the nature of diseases.This work uses a color grouping method to identify non-blood cells from digital blood photos.This method separates the darkish non-blood areas from the bloodstream and aids with counting the non-blood cells.Furthermore, the three most widely used ML models are used to estimate the category of non-blood cells.The SVM is model shown to have the best level of accuracy.After that, a combined approach is developed to improve prediction performance.In this architecture, the SVM is paired with the Resnet50 deep neural network framework and acquires accuracy levels exceeding 99%.
In the foreseeable future, a customized treatment plan must be developed in order to comprehend ALL.The evaluation can consider a range of private details, such as genomic characteristics, clinical criteria, and response to treatment statistics, in order to produce a prognosis of treatment outcomes that is specific to each patient.The combination of artificial intelligence (AI) and machine learning (ML) systems aids the prediction of the most beneficial remedies for each particular ailment.As the AI and ML system is the most beneficial in this prediction aspect, real-time system tracking is one of the most effective ways to manage ALL.It is essential to regularly monitor a patient's status and how they are reacting to treatment.Subsequent investigations could focus on developing automated monitoring systems that provide immediate information to medical professionals on the statuses of patients.This would allow the medical professionals to treat it swiftly before the illness progresses, as it has been noted to worsen at a fast pace.
where M = a constant value for contrast enhancement.The degree of clarity that an imaging modality can recrea sharpness[34] of a picture.It is characterized by the margins b colors in each region.Image sharpening is a technique used to ma sharper or clearer.It is a crucial tool in the image processing sys ening of an image makes it appear more noticeable and livelier.nition of sharpness level graphically.

Figure 2 .
Figure 2. Histogram distribution of the global thresholding model.

Figure 2 .
Figure 2. Histogram distribution of the global thresholding model.

Figure 3 .
Figure 3. Outline of the proposed hybrid learning approach.

Figure 4 .
Figure 4.The prediction process for acute lymphoblastic leukemia prediction.

Figure 3 .
Figure 3. Outline of the proposed hybrid learning approach.

Figure 3 .
Figure 3. Outline of the proposed hybrid learning approach.

Figure 4 .
Figure 4.The prediction process for acute lymphoblastic leukemia prediction.

Figure 4 .
Figure 4.The prediction process for acute lymphoblastic leukemia prediction.

Algorithm 1 :of 17 Algorithm 2 :Algorithm 3 :Figure 5 .
Figure 5.A complete workflow diagram for leukemia detection and prediction using the proposed methodology.Figure 5.A complete workflow diagram for leukemia detection and prediction using the proposed methodology.

Figure 5 .
Figure 5.A complete workflow diagram for leukemia detection and prediction using the proposed methodology.Figure 5.A complete workflow diagram for leukemia detection and prediction using the proposed methodology.

Figure 7 .
Figure 7. Leukemia detection process.(A) Original image: category benign; (B) brightness, contrast, and sharpness adjustment image; (C) binary segmented image; (D) highlighted non-blood cells after applying the K-means clustering method and morphological operators; and (E) no. of non-blood cells calculation.

Figure 7 .
Figure 7. Leukemia detection process.(A) Original image: category benign; (B) brightness, contrast, and sharpness adjustment image; (C) binary segmented image; (D) highlighted non-blood cells after applying the K-means clustering method and morphological operators; and (E) no. of non-blood cells calculation.

Figure 8 .
Figure 8.The ROC analysis for the top model SVM.

Figure 9 .
Figure 9.The ROC analysis for the hybrid learning approach [Resnet50 with SVM].

Figure 8 . 1 Figure 8 .
Figure 8.The ROC analysis for the top model SVM.

Figure 9 .
Figure 9.The ROC analysis for the hybrid learning approach [Resnet50 with SVM].

Figure 9 .
Figure 9.The ROC analysis for the hybrid learning approach [Resnet50 with SVM].

Table 1 .
Brief analysis of the literature survey.

Table 2 .
Experimental specifications of applied single learning models.

Table 3 .
Performance analysis of single learning models.

Table 4 .
Performance analysis of the hybrid learning model.

Table 5 .
Comparative analysis of several current research with the proposed model for leukemia prediction.