Next Article in Journal
Dance Pose Identification from Motion Capture Data: A Comparison of Classifiers
Next Article in Special Issue
Power Density Distribution for Laser Additive Manufacturing (SLM): Potential, Fundamentals and Advanced Applications
Previous Article in Journal
Editorial for the Special Issue “Personal Health and Wellbeing Intelligent Systems Based on Wearable and Mobile Technologies”
Previous Article in Special Issue
Additive Manufacturing of a 316L Steel Matrix Composite Reinforced with CeO2 Particles: Process Optimization by Adjusting the Laser Scanning Speed
Article Menu
Issue 1 (March) cover image

Export Article

Open AccessFeature PaperArticle
Technologies 2018, 6(1), 30; https://doi.org/10.3390/technologies6010030

Notes on Article Versions

Action Date Notes Link
article pdf uploaded. 9 March 2018 10:24 CET Version of Record https://www.mdpi.com/2227-7080/6/1/30/pdf
article xml uploaded. 9 March 2018 10:24 CET Original file -
article xml uploaded. 9 March 2018 10:24 CET Update https://www.mdpi.com/2227-7080/6/1/30/xml
article html file updated 9 March 2018 10:25 CET Original file -
article html file updated 27 March 2018 16:54 CEST Update -
article html file updated 28 March 2018 04:23 CEST Update -
article html file updated 29 March 2019 05:15 CET Update -
article html file updated 17 April 2019 12:42 CEST Update -
article html file updated 1 May 2019 13:01 CEST Update https://www.mdpi.com/2227-7080/6/1/30/html
Technologies EISSN 2227-7080 Published by MDPI AG, Basel, Switzerland RSS E-Mail Table of Contents Alert
Back to Top