Assessing the Effectiveness of Eco-Friendly Management Approaches for Controlling Wheat Yellow Rust and Their Impact on Antioxidant Enzymes

Wheat stripe rust, caused by Puccinia striiformis f. sp. tritici (Pst), is a destructive disease that causes significant yield losses in wheat production worldwide, including in Egypt. The use of biocontrol agents is among the best eco-friendly management strategies to control this disease, as they are more sustainable and environmentally friendly than traditional chemical control methods. In a comparative analysis, antioxidant enzyme activity and various management approaches were compared with two bacterial biocontrol agents, Bacillus subtilis and Pseudomonas putida. This study showed the remarkable efficacy of endophytic bacteria, B. subtilis and P. putida, in mitigating wheat stripe rust infection across three wheat varieties, namely Misr1, Gimmeiza11, and Sids12. B. subtilis exhibited superior performance compared to P. putida, resulting in infection types of 1 and 2.66, respectively, following inoculation. The highest reduction rate was observed with Tilit fungicide (500 ppm), followed by B. subtilis and Salicylic acid (1000 ppm), respectively. Variations in wheat varieties’ response to Pst infection were observed, with Misr1 exhibiting the lowest infection and Sids12 showing high susceptibility. Among the tested inducers, Salicylic acid demonstrated the greatest reduction in disease infection, followed by Indole acetic acid, while Oxalic acid exhibited the lowest decrease. Additionally, the study evaluated the activities of five antioxidant enzymes, including Catalase, Ascorbate peroxidase (APX), glutathione reductase (GR), Superoxide dismutase (SOD), and peroxidase (POX), in the wheat-stripe rust interaction under different integrated management approaches. The wheat variety Misr1 treated with Tilit (500 ppm), B. subtilis, Salicylic acid, Montoro (500 ppm), and P. putida exhibited the highest increase in all enzymatic activities. These findings provide valuable insights into the effectiveness of B. subtilis and P. putida as biocontrol agents for wheat stripe rust control in Egypt, emphasizing their potential role in sustainable, integrated, and environmentally friendly management practices.


Introduction
Wheat yellow rust (WYR) or stripe rust (SR), caused by Puccinia striiformis f. sp. tritici (Pst), presents a substantial obstacle to wheat production, resulting in severe damage to wheat crops globally [1][2][3], particularly in regions with wet and cool weather [3]. The Pst the upregulation of PR protein genes, which serve as crucial players in inducing resistance when triggered by chemical inducers [18,21].
The objective of this study is to assess the effectiveness of eco-friendly management approaches for controlling WYR in Egypt and their impact on antioxidant enzymes. We aim to identify the most effective and sustainable strategies for controlling yellow rust in wheat. Our study will also provide insights into the mechanisms underlying the effectiveness of these approaches, which can help inform the development of new eco-friendly management strategies for controlling yellow rust. Ultimately, our goal is to promote more sustainable and environmentally friendly agriculture in Egypt and beyond while also contributing to food security and the long-term sustainability of wheat production.

Wheat Stripe Rust Infection Type upon Application of Two Tested Bacterial Bioagents
The three wheat varieties were assessed for SR infection type before and after inoculation with two endophytic bacteria, B. subtilis and P. putida, as indicated in Figure 1. The results indicated that the stripe rust infection type was reduced after inoculation with the endophytic bacteria for these varieties. For the Misr1 wheat variety, the stripe rust infection type was 2.33 before inoculation with B. subtilis and was reduced to 1 after inoculation. With P. putida, the infection type was 3.66 before inoculation and 2.66 after inoculation. The Gimmeiza11 wheat variety had a stripe rust infection type of 3.33 before inoculation with B. subtilis, which was reduced to 2 after inoculation. When inoculated with P. putida, the infection type was 5 before inoculation and 3.66 after inoculation. Lastly, the Sids12 wheat variety had the highest infection type before inoculation, which was 5.33 with B. subtilis and 7.33 with P. putida. After inoculation, the infection type was reduced to 3.66 and 5.66, respectively. The infection type was recorded based on the scale described by Chen [22]. The letters assigned (e.g., 'a', 'b', 'c') correspond to the results of Duncan's multiple range test conducted at a significance level of p < 0.05. The infection type was recorded based on the scale described by Chen [22]. The letters assigned (e.g., 'a', 'b', 'c') correspond to the results of Duncan's multiple range test conducted at a significance level of p < 0.05.
Additionally, the impact of both bioagents against stripe rust infection in the three tested wheat varieties is shown in a heat map in Figure 2. The heat map is divided into two portions, pre-inoculation and post-inoculation, with the pathogen Pst. The heat map is color-coded, with red denotes a high degree of infection, whereas blue denotes a low level of infection. The heat map of the control group exhibited a substantially high level of infection in all tested varieties. Notably, Sids12 exhibited the highest infection, represented by a darkened red color, followed by Gimmeiza11, whereas Misr1 displayed a lower infection Notably, the level of infection decreased in all three varieties when treated with both bacterial bio-agents. Overall, the heat map demonstrates that B. subtilis proves to be a more effective bioagent than P. putida in reducing stripe rust infection in wheat. Additionally, the heat map highlights that the two bioagents are most effective when applied after the wheat plants are inoculated with Pst.
tested wheat varieties is shown in a heat map in Figure 2. The heat map is divided into two portions, pre-inoculation and post-inoculation, with the pathogen Pst. The heat map is color-coded, with red denotes a high degree of infection, whereas blue denotes a low level of infection. The heat map of the control group exhibited a substantially high level of infection in all tested varieties. Notably, Sids12 exhibited the highest infection, represented by a darkened red color, followed by Gimmeiza11, whereas Misr1 displayed a lower infection level. Notably, the level of infection decreased in all three varieties when treated with both bacterial bio-agents. Overall, the heat map demonstrates that B. subtilis proves to be a more effective bioagent than P. putida in reducing stripe rust infection in wheat. Additionally, the heat map highlights that the two bioagents are most effective when applied after the wheat plants are inoculated with Pst.

Wheat Varietal Reaction in Response to Stripe Rust Infection
The results indicated in Figure 3A suggested that among the five wheat varieties examined, Sids12 had the highest level of stripe rust infection, with a rating of 9.00. Giza171, Sakha95, and Gimmeiza11 all had moderate levels of stripe rust infection, with ratings of 8.00, 6.00, and 7.00, respectively. Misr1 had the lowest level of stripe rust infection, with a rating of 5.00. In addition, Figure 3B shows a dendrogram of clustering analysis of five wheat varieties based on their infection-type response against Pst. The analysis was performed using Ward linkage. Accordingly, the five wheat varieties can be grouped into three distinct clusters. The first cluster (Group 1) includes the varieties Giza171 and Sids12. These varieties are both very susceptible to Pst infection. The second cluster (Group 2) includes the varieties Sakha95 and Gimmeiza11. These varieties are both moderately susceptible to Pst infection. The third cluster (Group 3) includes the variety Misr1. This variety is moderately resistant to Pst infection.

Wheat Varietal Reaction in Response to Stripe Rust Infection
The results indicated in Figure 3A suggested that among the five wheat varieties examined, Sids12 had the highest level of stripe rust infection, with a rating of 9.00. Giza171, Sakha95, and Gimmeiza11 all had moderate levels of stripe rust infection, with ratings of 8.00, 6.00, and 7.00, respectively. Misr1 had the lowest level of stripe rust infection, with a rating of 5.00. In addition, Figure 3B shows a dendrogram of clustering analysis of five wheat varieties based on their infection-type response against Pst. The analysis was performed using Ward linkage. Accordingly, the five wheat varieties can be grouped into three distinct clusters. The first cluster (Group 1) includes the varieties Giza171 and Sids12. These varieties are both very susceptible to Pst infection. The second cluster (Group 2) includes the varieties Sakha95 and Gimmeiza11. These varieties are both moderately susceptible to Pst infection. The third cluster (Group 3) includes the variety Misr1. This variety is moderately resistant to Pst infection.
While Figure 4 shows the response of the tested varieties (Misr1, Gimmeiza11, and Sids12) to three different management approaches for stripe rust infection. The control group had the highest infection rate, with Misr1 having the lowest of the three varieties at 5.00. The infection rate varied in response to different management methods. The lowest variety upon infection was Misr1, followed by Gimmeiza11 and Sids12. Misr1 showed the lowest infection rate of (0.66) observed with Tilit 25% EC (500 ppm), followed by the infection rate of (1.00) seen with Salicylic acid (1000 ppm) and B. subtilis. Gimmeiza11 had the second-lowest infection rate in all three groups, with 1.33, 2.33, and 2.00 for Tilit, Salicylic acid, and B. subtilis, respectively. While Sids12 had the highest infection rate in all three groups with (6.00), which was observed in Sumi eight 5% EC (500 ppm), oxalic acid (1000 ppm), and P. putida. While Figure 4 shows the response of the tested varieties (Misr1, Gimmeiza11 Sids12) to three different management approaches for stripe rust infection. The co group had the highest infection rate, with Misr1 having the lowest of the three variet 5.00. The infection rate varied in response to different management methods. The lo variety upon infection was Misr1, followed by Gimmeiza11 and Sids12. Misr1 showe lowest infection rate of (0.66) observed with Tilit 25% EC (500 ppm), followed by th fection rate of (1.00) seen with Salicylic acid (1000 ppm) and B. subtilis. Gimmeiza11 the second-lowest infection rate in all three groups, with 1.33, 2.33, and 2.00 for  . Comparative analysis of three wheat varieties (Misr1, Gimmeiza11, and Sids12) in response to stripe rust infection under three management approaches: fungicides, chemical inducers, and bioagents. Tilit 25% EC, Montoro 30% EC, and Sumi eight. The assigned letters (e.g., 'a', 'b', 'c') denote outcomes of Duncan's multiple range test performed at a significance level of p < 0.05.

Wheat Stripe Rust Infection Type upon Application of Three Tested Chemical Inducers
Data in Table 1 shows the impacts of different concentrations of chemical inducers, Salicylic acid, Indole acetic acid, and oxalic acid, on the SR infection type in wheat plants before and after inoculation for three wheat varieties (Misr1, Gimmeiza11 and Sids12). The stripe rust infection type of the control treatment was 5.00 for Misr1, 7.00 for Gimmeiza11, and 9.00 for Sids12, either before or after the inoculation. All treatments showed a reduction in the infection type, and it was also reduced after inoculation compared to before inoculation. Additionally, increasing the concentration of the tested inducers led to a decrease in the stripe rust infection type for all three wheat varieties. Table 1. Pre-and post-inoculation assessment of chemical inducers salicylic acid, indole acetic acid, and oxalic acid on controlling stripe rust infection in three wheat varieties (Misr1, Gimmeiza11, and Sids12).

Chemical Inducers
Con. ppm

Wheat Stripe Rust Infection Type upon Application of Three Tested Chemical Inducers
Data in Table 1 shows the impacts of different concentrations of chemical inducers, Salicylic acid, Indole acetic acid, and oxalic acid, on the SR infection type in wheat plants before and after inoculation for three wheat varieties (Misr1, Gimmeiza11 and Sids12). The stripe rust infection type of the control treatment was 5.00 for Misr1, 7.00 for Gim-meiza11, and 9.00 for Sids12, either before or after the inoculation. All treatments showed a reduction in the infection type, and it was also reduced after inoculation compared to before inoculation. Additionally, increasing the concentration of the tested inducers led to a decrease in the stripe rust infection type for all three wheat varieties. Table 1. Pre-and post-inoculation assessment of chemical inducers salicylic acid, indole acetic acid, and oxalic acid on controlling stripe rust infection in three wheat varieties (Misr1, Gimmeiza11, and Sids12).

Chemical Inducers
Con. ppm The letters assigned (e.g., 'a', 'b', 'c') correspond to the results of Duncan's multiple range test conducted at a significance level of p < 0.05. Different letters denote significant differences between treatments, while similar letters indicate non-significance. × refers to the interaction between variables.

Pre-Inoculation
For Salicylic acid, the results showed that the lowest infection type was recorded at 1000 ppm with 2.33, 3.66, and 5.66 (before inoculation), while 1.00, 2.33, and 4.00 (after inoculation) for Misr1, Gimmeiza11 and Sids12, respectively. For Indole acetic acid, a similar trend was observed with decreasing stripe rust infection type as the concentration increased. The highest concentration (100 ppm) showed the lowest infection type of 3.33, 4.66, and 6.66 before inoculation, while it was 2.33, 3.66, and 5.00 after the inoculation, for Misr1, Gimmeiza11, and Sids12, respectively. Before the inoculation, the infection type was 7.66 for Sids12, and after the inoculation, it was 6.00. For oxalic acid, the results showed that the stripe rust infection type decreased with increasing concentration. The highest concentration (1000 ppm) showed the lowest infection type of 3.00 after the inoculation in Misr1. Before the inoculation, the infection type was 7.66 for Sids12, and after the inoculation, it was 6.00, while it was 5.33 before inoculation and then reduced to 4.66 after inoculation for Gimmeiza11. Accordingly, Salicylic acid proved the best results in reducing the infection type among the other tested inducers, followed by Indole acetic acid, while oxalic acid had the lowest decrease in stripe rust infection type.

Wheat Stripe Rust Infection Type upon Application of Three Tested Fungicides
Data in (Table 2) revealed the impact of three fungicides (Tilit 25% EC, Montoro 30% EC, and Sumi eight 5% EC) at different concentrations (125 ppm, 250 ppm, and 500 ppm) on stripe rust infection type in wheat plants was tested before and after inoculation for three wheat varieties (Misr1, Gimmeiza11, and Sids12). For the wheat variety Misr1, the control treatment resulted in an infection rate of 5.00 before and after inoculation. When treated with (Tilit), the infection type decreased to 1.66 and 2.66 at 125 ppm and 250 ppm, respectively, after inoculation, while 500 ppm showed the least infection type of 0.66. For Gimmeiza11, the control treatment resulted in an infection type of 7.00 before and after inoculation. The lowest infection type was recorded at 500 ppm of (Tilit) with 3.00 before inoculation and 1.33 and after inoculation. For Sids12, the control treatment resulted in an infection type of 9.00 before and after inoculation. The infection type decreased to 3.66 after inoculation and 5.33 before inoculation.
After treatment with (Tilit), the best infection type reduction was recorded at 500 ppm with 3.66, 1.33, and 0.66 for Sids12, Gimmeiza11, and Misr1, respectively. Treatment with (Montoro) showed similar trends in infection type reduction for all three wheat varieties, with the lowest type recorded at 500 ppm for Misr1, Gimmeiza11, and Sids12 with 2.00, 2.33, and 4.66, respectively. Lastly, treatment with (Sumi 8) showed the highest infection type for all three wheat varieties. The highest reduction in infection type was recorded at 500 ppm for Misr1, Gimmeiza11, and Sids12, with 2.66, 3.66, and 6.00, respectively. Accordingly, the results showed that all three fungicides were effective in decreasing stripe rust infection in the three wheat varieties tested, with (Tilit) showing the best results and the lowest infection type; however, (Sumi 8) showed the highest records of infection type. Additionally, the concentration of 500 ppm was the best for all fungicides to achieve better reduction in the infection type. Also, results revealed that Sids12 exhibited the highest infection type, while Mis 1 was the lowest infected variety in the control. The letters assigned (e.g., 'a', 'b', 'c') correspond to the results of Duncan's multiple range test conducted at a significance level of p < 0.05. Dissimilar letters denote significant differences between treatments, while similar letters indicate non-significance. × refers to the interaction between variables.

Catalase Activity
As shown in (Table 3a,b and Figure 5), the activity of catalase enzyme in wheat plants infected by stripe rust was increased after treatment with the three tested fungicides. The increase in activity was concentration-dependent and differed among the three wheat varieties tested. Misr1 wheat variety showed the most notable increase in activity when treated with Tilit 25% EC at a concentration of 500 ppm after inoculation (70.6). Salicylic acid at a concentration of 1000 was the most effective inducer, increasing catalase activity in all three wheat varieties after inoculation Misr1 (70.4), Gimmeiza11 (58.5), and Sids12 (46.5). The results showed that the enzyme activity increased in all wheat varieties after inoculation with the two bacterial bioagents. Misr1 exhibited the highest increase in activity after being sprayed with B. subtilis (70.4), followed by P. putida (67.3). Similarly, the enzyme activity in Gimmeiza11 and Sids12 also increased after inoculation with both bacteria. Table 3. (a) sCatalase enzyme activity on wheat plants infected by stripe rust before (pre-) and after (post-) inoculation with some fungicide (Tilit 25% EC, Montoro 30% EC, and Sumi eight 5% EC) for three wheat varieties (Misr1, Gimmeiza11, and Sids12). (b) Effect of chemical inducers (salicylic acid, indole acetic acid, and oxalic acid) on catalase activity in three wheat varieties (Misr1, Gimmeiza11, and Sids12) pre-and post-inoculation with stripe rust.   The letters assigned (e.g., 'a', 'b', 'c') correspond to the results of Duncan's multiple range test conducted at a significance level of p < 0.05. Different letters denote significant differences between treatments, while similar letters indicate non-significance. × refers to the interaction between variables.

Ascorbate Peroxidase (APX) Activity
The chemical inducers' impact on APX enzyme activity is indicated in (Table 4a,b and Figure 5). All three fungicides after inoculation increased APX enzyme activity in all wheat varieties, with Tilit showing the highest after inoculation at a concentration of 500 ppm misr1 (65.5), Gimmeiza11 (54.6), and Sids12 (43.5), the lowest increased APX enzyme activity in treatments groups with Sumi8 before inoculation at a concentration of 125 ppm in all wheat varieties Misr1 (55.9), Gimmeiza11 (44.2), and Sids12 (33.1). After inoculation, the highest APX activity with salicylic acid in all varieties at a concentration of 1000 ppm misr1 (65.  .7) with P. putida. Figure 5. The enzymatic activities of five enzymes-CAT, APX, GR, POX, and SOD-were evaluated on three wheat varieties, namely Misr1, Gimmeiza11, and Sids12. The assessment was conducted upon treatment with two bacterial bioagents, B. subtilis, and P. putida, both before and after Figure 5. The enzymatic activities of five enzymes-CAT, APX, GR, POX, and SOD-were evaluated on three wheat varieties, namely Misr1, Gimmeiza11, and Sids12. The assessment was conducted upon treatment with two bacterial bioagents, B. subtilis, and P. putida, both before and after inoculation with the Pst pathogen. The letters assigned following Duncan's analysis at a significance level of p < 0.05, denoting significant differences, while common letters denote nonsignificance. The letters assigned (e.g., 'a', 'b', 'c') correspond to the results of Duncan's multiple range test conducted at a significance level of p < 0.05. Similar letters denote non-significance, while dissimilar letters denote significant differences between treatments. × refers to the interaction between variables.

Glutathione Reductase (GR) Activity
Table 5a,b and Figure 5 revealed that Tilit 25% EC showed the highest increase in GR enzyme activity after inoculation in Misr1 (65.5) at a concentration of 500 ppm, while the highest increase in Gimmeiza11, (52.3) was seen at the same fungicide and concentration. For Sids12 (39.4), the highest increase was seen with Tilit 25% EC at 500 ppm. Results showed that all three wheat varieties showed increased GR enzyme activity when treated with different chemical inducers compared to the control. Salicylic acid had the highest effect on increasing GR enzyme activity after inoculation in Misr1 (64.6) at a concentration of 1000 ppm, while oxalic acid had the lowest effect before inoculation in Sids12, (27.0) at a concentration of 250 ppm. Results showed an increase in GR enzyme activity in all wheat varieties after inoculation with both endophytic bacteria Misr1, with B. subtilis (65.1) and with P. putida (60.5). Gimmeiza11, (52.1) with B. subtilis and (45.5) with P. putida and Sids12, (38.8) with B. subtilis and (34.6) with P. putida, indicating that they can be effective biocontrol agents for increasing the resistance of wheat plants to stripe rust. Table 5. (a) GR enzyme activity on wheat plants infected by stripe rust before (pre-) and after (post-) inoculation with some fungicide (Tilit 25% EC, Montoro 30% EC, and Sumi eight 5% EC) for three wheat varieties (Misr1, Gimmeiza11, and Sids12). (b) Comparison of GR activity in three wheat varieties (Misr1, Gimmeiza11, and Sids12) infected with stripe rust and treated with chemical inducers (salicylic acid, indole acetic acid, and oxalic acid) pre-and post-inoculation.  The letters assigned (e.g., 'a', 'b', 'c') correspond to the results of Duncan's multiple range test conducted at a significance level of p < 0.05. Dissimilar letters signify significant differences between treatments, while identical letters denote non-significance. × refers to the interaction between variables.

Superoxide Dismutase (SOD) Activity
Data in Table 6a,b and Figure 5 indicated that the control group showed SOD enzyme activity of 8.38, 6.31, and 4.20 in the pre-inoculation stage for Misr1, Gimmeiza11, and Sids12, respectively. After inoculation, the SOD enzyme activity increased to 8.57, 6.51, and 4.40. All three fungicides showed an increase in SOD enzyme activity for the three wheat varieties in both pre-and post-inoculation stages. Propiconazol (Tilit 25% EC) with 500 ppm concentration showed the highest increase after inoculation in Misr1 (9.93), while sumi 8 with 125 ppm showed the lowest increase in SOD enzyme activity before inoculation in Sids12 (4.77). Chemical inducers' effect was also tested, revealing that the SOD activity was tested before and after inoculation with the inducers and compared to a control group. Salicylic acid with 1000 ppm concentration in post-inoculation showed the highest increase in SOD activity in all three varieties with (9.26, 7.76, and 5.95), followed by Indole acetic acid with 100 ppm concentration (8.83, 7.22, and 5.43), while oxalic acid with 1000 ppm concentration had a weaker effect with (8.38, 6.68 and 4.89). The SOD enzyme activity was measured before and after inoculation with bacterial bioagents. Results showed that SOD activity was increased after inoculation with both bacteria in all three wheat varieties. For example, in Misr1, the SOD enzyme activity was 9.42 before inoculation and 9.62 after inoculation with B. subtilis. The control group also showed an increase in SOD with 1000 ppm concentration activity after inoculation with both bacteria. Table 6. (a) SOD enzyme activity on wheat plants infected by stripe rust before (pre-) and after (post-) inoculation with some fungicide (Tilit 25% EC, Montoro 30% EC, and Sumi eight 5% EC) for three wheat varieties (Misr1, Gimmeiza11, and Sids12). (b) Comparative analysis of SOD activity in three wheat varieties (Misr1, Gimmeiza11, and Sids12) inoculated with stripe rust and treated with chemical inducers (salicylic acid, indole acetic acid, and oxalic acid.  As reported in (Table 7a,b and Figure 5), results showed that at 500 ppm concentration, Tilit had the greatest impact on increasing POX enzyme activity in all three wheat varieties post-inoculation, with (6.89, 5.09, and 3.31), while Montoro also had a positive effect but to a lesser extent with (6.35, 4.55, and 2.95). Sumi-8 had the least impact on increasing POX activity with (5.81, 4.01, and 2.59). Also, data showed that salicylic acid at 1000 ppm had the most significant effect post inoculation with (6.22, 4.72, and 3.22), followed by Indole acetic acid at 100 ppm with (5.77, 4.27 and 2.77), and then oxalic acid at 1000 ppm with (5.32, 3.82, and 2.32). In addition, the POX activity of all wheat varieties was higher when sprayed with B. subtilis post inoculation with (6.25, 4.55, and 2.96), while the lowest activity when sprayed with P. putida with (5.75, 4.14, and 2.72 as indicated in (Figure 5). The letters assigned in accordance with Duncan's analysis at a significance level of p < 0.05 serve to highlight statistically significant differences among treatments, whereas shared letters denote non-statistically significant. × refers to the interaction between variables.

Wheat Stripe Rust Infection Type upon Application of Two Tested Bacterial Bioagents
The results of the study showed that the application of endophytic bacteria, B. subtilis and P. putida, reduced the stripe rust infection type in all three wheat varieties. This finding is consistent with previous studies that have reported the efficacy of bacterial bioagents in controlling plant diseases, including wheat stripe rust. For example, a study conducted by [23] found that the B. subtilis strain (E1R-J) has reduced the disease severity of WYR in both greenhouse and field experiments. Also, many studies reported that B. subtilis acts as an abio-fungicide with a significant reduction in the severity of WYR disease, acting as a bio-fungicide [24][25][26][27]. In addition, B. subtilis strain QST 713 showed its potential for WYR control at the early growth stage under moderate disease pressure in winter wheat field trials [14,25]. B. subtilis exhibited inhibition of spore germination and prolonged incubation and latent periods compared to other treatments. Additionally, B. subtilis reduced the SR infection type, pustule length, pustule width, and number of pustules [26]. Treated leaves exhibited various abnormalities, including lysis, collapse, and shrinking of urediniospores. These observations may be attributed to the production of antibiotics by B. subtilis, such as bacillinbacitracin, bacillomycin, mycosubtilin, subsporin, subenolin, and subtilin [28]. These antibiotics effectively reduced disease development and minimized pustule size [26,29].
On the other hand, another study reported that P. putida strain JD204, isolated from wheat roots, was reported to activate resistance by the over-expression of the resistancerelated genes [24]. Also, P. putida ASU15 was applied during pathogen inoculation; it resulted in a higher reduction in disease severity of common bean rust (69.9%) compared to its application before pathogen inoculation (54.9%) [30]. P. putida can produce various antibiotics, siderophores, and a small amount of hydrogen cyanide (HCN). These substances effectively inhibit the growth of P. triticina both in vitro and in vivo [31].
The mechanism of action of endophytic bacteria in controlling plant diseases involves several mechanisms, such as competing for nutrients and space, as well as producing antimicrobial compounds, and induction of systemic resistance in the host plant [32,33]. B. subtilis and P. putida are capable of producing a diverse array of antimicrobial compounds that effectively hinder the growth of plant pathogens, including fungi and bacteria [14,34]. In addition, these bacteria can induce systemic resistance in plants, which is a defense mechanism that enables plants to resist infection by pathogens [35]. Applying bioagents has the potential to bring about beneficial changes in the physical and mechanical integrity of cell walls, as well as adjust the physiological and biochemical responses of wheat plants. This, in turn, can boost the production of defense-related molecules that are crucial in delaying the inoculation and latent period of P. graminis. Furthermore, Bacillus spp. offer multiple methods for disease control, including the synthesis of antifungal compounds, nutrient competition, and the induction of systemic resistance [26,36].
The effectiveness of Bacillus spp. along with P. fluorescens as bio-agents in suppressing stripe rust disease in wheat plants was investigated [37]. B. subtilis and B. chitinosporus demonstrated the highest reduction in disease severity. Other studies have also supported the use of B. subtilis as a bio-agent for enhancing the tolerance of wheat plants under leaf rust disease stress [38]. Pst urediniospores and fungal hyphae engaged in competition for the entry site, while metabolites released by biological agents effectively impeded the growth of germ tubes. Moreover, the activation of PR protein genes may contribute to the development of resistance responses in inoculated plants [39]. In addition, two bioagents, P. fluorescence and B. subtilis, exhibited moderate effectiveness in controlling stripe rust, achieving reductions of 54.25% and 56.33%, respectively [40].
Overall, the results of this study suggest that the application of B. subtilis and P. putida can be an effective strategy for controlling wheat stripe rust. However, further research is needed to optimize the application methods and to evaluate the long-term effects of these bioagents on wheat growth and yield. Figure 3A shed light on the susceptibility of five varieties to yellow rust disease. Misr1 had the lowest level of infection; however, Sids12 had the highest level of stripe rust infection among the five wheat varieties examined. Giza171, Gimmeiza11, and Sakha 95 had moderate levels of infection. This suggests that Misr1 is relatively resistant to stripe rust compared to the other varieties evaluated. In addition, results in (Figure 4) evaluated the efficacy of three management approaches on three selected wheat varieties to stripe rust infection. The infection rate varied among the three management approaches, with Misr1 showing the lowest infection rate in response to Tilit 25% EC (500 ppm), Salicylic acid (1000 ppm), and B. subtilis. Gimmeiza11 had the second-lowest infection rate in all three groups, while Sids12 had the highest infection rate in all three groups.

Data in
Prior investigations have evaluated different wheat genotypes for their resistance potential. For example, In Egypt, Giza 168, Sakha-61, Sakha-93, Gimmeiza7, and Gim-meiza9 demonstrated satisfactory resistance levels in a two-year study [41]. However, Omara et al. [42] revealed that widely grown cultivars like Gemmeiza11 and Sids12 exhibited susceptibility to stripe rust under Egyptian field conditions. This contradicts their widespread cultivation across the country. Also, [43] stated that certain wheat cultivars, namely Giza168, Sakha93, Sids12, Gemmieza7, Gimmieza9, Gimmieza11, Sids1, and Sids13, were found to be susceptible to stripe rust. However, the cultivars Misr-1 and Misr-2 demonstrated resistance to the disease. Similarly, previous studies reported that Sids12 had the highest disease progression and yield loss. Also, Gimmeiza11 exhibited significant grain yield losses of 64.20% due to wheat stripe rust [6]. In contrast, our findings indicate that Misr1 exhibited promising outcomes in reducing wheat stripe rust infection. However, these results contradict a study conducted by [6], which classified Misr1 as a susceptible cultivar. The variation in response among the tested wheat cultivars can be attributed to genetic diversity, environmental conditions, and the emergence of aggressive rust pathogen races [6]. It is important to note that these results are specific to the conditions and period of the study. Therefore, caution should be exercised when generalizing these findings to other locations or time periods.
In addition, the susceptible wheat cultivar showed extensive colonization and high spore production when infected with P. striiformis, along with intercellular hyphae and haustoria. In contrast, the resistant cultivar exhibited limited and abnormal haustoria and hyphal development. Resistant wheat leaves had small, shriveled spores with a low spore count per sorus, while susceptible wheat leaves had numerous sori with a high spore quantity [44]. The reasons for the different varietal reactions to stripe rust infection could be attributed to genetic differences in the resistance/susceptibility of the wheat varieties [6,[45][46][47]. Therefore, genetic factors play a significant role in the phenotypic variations observed in the current study. The most effective and environmentally safe approach for managing wheat stripe rust is through host-genetic resistance or the cultivation of resistant wheat cultivars [45]. Moreover, the Yr gene, responsible for yellow rust resistance, regulates defense-related genes. Transcriptomics research has identified multiple genes involved in seedling-stage resistance [39,48]. Previous studies have reported the existence of different resistance genes in wheat that confer resistance to SR, such as Yr5, Yr10, and Yr15 [46,49].
Interestingly, the national wheat breeding program in Egypt relies on resistant genotypes from CIMMYT, ICARDA, and local sources. Nonetheless, in recent years, numerous commercial and recommended wheat cultivars have shown varying degrees of susceptibility to stripe rust nationwide [42]. Overall, the search for new sources of resistance is crucial to enhance stripe rust resistance in local breeding materials and reduce the need for extensive disease management efforts [47].

Wheat Stripe Rust Infection Type upon Application of Three Tested Chemical Inducers
The results showed that all tested inducers led to a reduction in the infection type, with higher concentrations of the inducers leading to a greater decrease in infection type. SA stimulates growth, enhances yield, and counters the pathogenic effects by inducing host resistance [50]. Previous studies have also explored the use of chemical inducers to control stripe rust infection in wheat. For example, Cheng et al. [51] found that salicylic acid was involved in the non-host resistance (NHR) of Arabidopsis against wheat stripe rust. Another study by [52] found that the application of Salicylic acid reduced stripe rust severity in wheat plants as measured by AUDPC (area under production curve). Since defense genes were activated after salicylic acid treatments compared to controls [53], it was confirmed that the application of SA in wheat can activate PR-1 and PR-2 [14]. On the other hand, another study by [54] showed that Indole acetic acid treatment at 100 µgmL −1 reduced stripe rust infection and induced rust resistance in wheat cv. Tamuz-2. Similarly, previous researchers indicated that indole acetic acid plays a significant role in inducing wheat defense mechanisms and reducing the severity of wheat stripe rust disease [18,52]. Our findings align with previous studies, providing further support for the effectiveness of SA and IAA in reducing the SR infection type in wheat plants.
The reason for the effectiveness of salicylic acid and indole acetic acid in reducing stripe rust infection type may be due to their ability to induce plant defense responses against pathogens [14]. Salicylic acid has a main role in systemic acquired resistance (SAR), a plant defense mechanism against pathogens, while Indole acetic acid has been shown to induce the expression of genes involved in plant defense responses [11,18,55]. In contrast, the current study found that oxalic acid had the lowest decrease in stripe rust infection type. Previous studies have also shown mixed results with the use of oxalic acid to control fungal pathogens in plants. For example, a study by [56] found that oxalic acid had no significant effect on powdery mildew infection in wheat plants. However, ref. [57] recorded the maximum disease severity using oxalic acid compared with other chemical inducers on French bean rust under pot conditions with 35.33%.The lack of effectiveness of oxalic acid in the current study may be due to differences in the pathogen, plant species, or experimental conditions. Overall, the findings of the current study suggest that salicylic acid and indole acetic acid can be effective in reducing stripe rust infection type in wheat plants, while the effectiveness of oxalic acid may be limited.

Wheat Stripe Rust Infection Type upon Application of Three Tested Fungicides
Applying fungicides for the management of plant diseases is a well-established practice in agriculture. Several previous researchers have examined the impact of different fungicides against WYR. The present study provides further evidence for the effectiveness of Tilit and Montoro in controlling stripe rust in wheat while also highlighting the limitations of Sumi 8 in this regard. The use of fungicides at a concentration of 500 ppm was found to be highly effective in minimizing the infection type of stripe rust in the tested wheat varieties. The results of the study also emphasize the importance of selecting appropriate fungicides for controlling plant diseases based on their efficacy and the genetic characteristics of the crop.
The most employed fungicides for managing stripe rust disease are demethylation inhibitors (DM1; triazole) class [12,[58][59][60]. These fungicides target specific enzymes or vital metabolic pathways within fungi [61]. Notably, propiconazole, Difenoconazole, and Diniconazole are prominent triazole fungicides, serving as the active ingredients in the tested fungicides ( Table 8). The triazole fungicides hinder the function of the 14α-demethylase enzyme, which is encoded by the Cyp51 genes. This inhibition prevents the synthesis of ergosterol, a crucial component for preserving the integrity of the fungal cell membrane. Additionally, these fungicides impede spore formation and hinder the growth of fungi at the stage of first haustoria formation, causing stunted development [62][63][64][65][66]. The triazole-based formulations are highly popular plant protection products due to their effective protective and curative properties, best applied during the early stages of disease development [67][68][69]. Propiconazole, registered as Tilt, has been utilized for over two decades [70,71]. Tilt operates systemically, offering both protective and curative capabilities, primarily inhibiting fungal growth [72]. A study by [73] found that Tilit was effective in controlling stripe rust in wheat at a concentration of 250 ppm. Similarly, another study by [74] showed that the spray of Tilt 0.1 percent drastically decreased the stripe rust in all the assessed varieties. Ref. [75] supported the high efficacy of propiconazole fungicides such as Tilt 25EC, which is particularly effective against leaf rust and yellow rust. Also, propiconazole 25EC demonstrated significant effectiveness in reducing the severity of yellow rust by 80.2% [40]. When Tilt was used at the recommended concentration, it effectively suppressed urediniospore germination in all tested isolates. However, lowering the fungicide concentrations resulted in varying germination rates among the fungal isolates [76].
On the other hand, the inclusion of diverse, active ingredients in new fungicides further complicates the categorization of their protective roles [12]. Montoro is a systemic fungicide that has two active substances, Difenoconazole and Propiconazole, which give a wide double effect on many fungal diseases such as WYR, as indicated in the current study. Zhang et al. [69] suggested that the use of difenoconazole and propiconazole on wheat is considered to be safe under the Good Agricultural Practices (GAP) in the Chinese fields, and the main factors for pesticide residue in crops are application times, rates, and pre-harvest intervals. Previous studies have also shown the effectiveness of foliar spraying of difenconazole, propiconazole, and tebuconazole against this disease [71,77,78]. Difenoconazole is one of the most widely used (DMI; triazole) fungicides for reducing the severity of various plant diseases, such as stripe rust [68,72]. Moreover, the combination of propiconazole and azoxystrobin application has emerged as the optimal choice in controlling WYR, as these chemicals possess two different modes of action [72,[79][80][81].
In turn, Sumi 8 has shown a reduction in the disease severity; however, it revealed the lowest results among the tested fungicides. Similarly, previous studies indicated that Sumi-8 prevented spore germination of P. triticina [26,82]. Overall, our results provide further evidence for the effectiveness of Tilit and Montoro fungicides in controlling WYR. The findings underscore the importance of selecting appropriate fungicides based on their efficacy, concentration, and genetic characteristics of the crop.

Antioxidant Enzyme Activity in Wheat-Stripe Rust Interaction
The study investigated the effects of three fungicides, chemical inducers, and two bioagents on the activity of antioxidant enzymes in three wheat varieties. The observed increases in antioxidant enzyme activity in wheat plants infected with stripe rust and treated with various inducers and fungicides can be attributed to the plants' defense response against the pathogen [83]. Catalase and ascorbate peroxidase are important enzymes that scavenge reactive oxygen species (ROS) and protect plant cells from oxidative damage during pathogen attacks [84]. Catalase (CAT) is an essential oxidative enzyme that boosts host resistance against plant pathogens by limiting pathogen spread and activating defense genes [85]. Increased CAT activity helps prevent the accumulation of hydrogen peroxide levels, which can be detrimental to cells, and serves as a secondary signal for defense gene expression and SAR [85,86]. Similarly, glutathione reductase (GR) has a key role in maintaining the cellular redox balance, which is essential for plant resistance against pathogens [87]. Peroxidase (POX) is another enzyme involved in plant defense responses and serves as an indicator of disease resistance [88,89]. POX plays a direct role in the synthesis of lignin, enhancing the ability of protected tissues to resist pathogens [89]. Superoxide dismutase and peroxidase enzymes also have been shown to play a role in plant resistance against pathogens by removing ROS and activating defense-related genes [90,91]. The induction of these antioxidant enzymes by various chemical inducers and fungicides may contribute to the enhanced resistance of wheat plants against stripe rust infection.
In treatments with B. subtilis, the activities of (CAT), (POX), and (PPO) were significantly increased, resulting in reduced infection [26]. Aboulila [18] investigated the induction of systemic acquired resistance (SAR) in susceptible wheat (Sids-12) against (Pst) using five phytohormones, including (SA), abscisic acid (ABA), indole 3-butyric acid (IBA), (IAA) and naphthaleneacetic acid (NAA). Overexpression of PR protein genes played a crucial role in activating the host defense mechanism. Phytohormones as chemical inducers offer safer and more efficient control of wheat stripe rust, reducing infection and inducing resistance. Phytohormones have a significant role in managing plant diseases by directly reducing fungal germination and development or indirectly promoting plant defense systems [95]. In the Sids-12 wheat genotype, the activation of resistance genes was observed after treatment with IAA and inoculation with Pst spores. The expression of PR-4 was highly induced along with PR-1 at all-time points and concentrations of IAA, indicating a significant increase in endochitinase production [18]. On the other hand, exposure to difenoconazole was found to increase the activities of antioxidant enzymes such as superoxide dismutase (SOD), catalase (CAT), guaiacol peroxidase (G-POD), and ascorbate peroxidase (APX) in both the roots and leaves of wheat seedlings [96]. This exposure also led to an increase in the production of (ROS) such as O 2 •− and H 2 O 2 , as well as malondialdehyde (MDA) in plant leaf cells [96]. To repair the damage caused by ROS, plants have developed a complex enzymatic antioxidant system, including SOD, CAT, G-POD, (GR), and APX, which efficiently maintains the redox balance in plant cells by scavenging excessive ROS [96,97].
Comparing resistant and susceptible cultivars, it was observed that resistant cultivars exhibited lower rust severity and slower disease progression. Susceptible cultivars, on the other hand, showed the accumulation of (ROS) such as (O 2 •− ) and (H 2 O 2 ). In contrast, resistant cultivars demonstrated higher activity of catalase (CAT) and peroxidase (POX), along with increased chlorophyll levels [43,98]. Histological analysis revealed inhibited haustoria and hyphae in the resistant cultivar (Misr-1), while the susceptible cultivar (Sids-12) displayed abundant intercellular hyphae and haustoria [43].
The Yr18 resistant gene was found to be overexpressed in resistant cultivars, leading to higher levels of reactive oxygen species (ROS) accumulation, specifically superoxide (O 2 •− ) and hydrogen peroxide (H 2 O 2 ), and lower activities of catalase (CAT), peroxidase (POX), and polyphenol oxidase (PPO) [44]. These findings were also supported by [99]. The Yr18/Lr34/Pm38 locus provides partial and long-lasting adult plant resistance (APR) against leaf rust, stripe rust, and powdery mildew in wheat [100]. It can be concluded that the resistant wheat cultivars exhibited suppressed disease severity and symptoms due to the presence of the Yr18 resistant gene and the accumulation of ROS, which potentially resulted in decreased enzyme activities and electrolyte leakage compared to susceptible cultivars [44].
The activation of PR protein genes is believed to contribute to the resistance response in plants upon pathogen inoculation [39]. Among these genes, PR1 is associated with pathogen-induced systemic acquired resistance and is considered a marker for the salicylic acid (SA) pathway, which plays a vital role in enhancing plant defense [101]. (Elsharkawy et al., 2013). Another important protein, PR2, known as β-1, 3-glucanase, is involved in wheat resistance controlled by various Yr genes. β-1, 3-glucanases regulate callose deposition and can break down fungal cell wall glucans, activating host defense mechanisms [102]. PR3 and PR4 are endochitinases that target chitin, a major component of fungal cell walls, and their activity is crucial for wheat's defense against yellow rust [48,71]. The activation of pathogenesis-related protein genes, including PR1, PR2, PR3, and PR4, may play a role in reducing yellow rust disease severity [39].

Seedling and Varietal Reaction
Seedling testing is more frequently employed in controlled greenhouse environments, as it only requires a limited area and a few weeks. For seedling experiments, plants with one to two leaves that are seven to fourteen days old were employed. To conduct the experiment, we utilized seeds from five different wheat cultivars: Misr1, Sakha 95, Gimmeiza11, Giza 171, and Sids12. Each seed was planted individually in a pot measuring 7 cm in diameter and 10 cm in height. The pots were filled with a mixture of compost and soil in a 2:1 ratio by volume. To ensure optimal growth conditions, the plants were cultivated in a greenhouse that was free from any rust contamination. The cultivation process followed a well-established procedure, as described previously [103]. Three varieties were selected for in-depth analysis, including Misr1, Gimmeiza11, and sids12.

Inoculation of Pst
Around 10 days after the initial planting, the seedlings were subjected to inoculation when the first leaves had fully grown and the second leaves had approximately halfway emerged. The selection of the most virulent Pst strain for further investigation was made from a group of 34 isolates based on their virulence phenotypes on wheat differential hosts. A mixture of fresh urediniospores and talc was applied at a ratio of 1:20. To facilitate the growth of the inoculated plants. They were placed in a dew chamber for incubation. Subsequently, they were transferred to a growth chamber with specific temperature and light conditions. Initially, the plants were kept in darkness at a temperature range of 10 to 13 • C for 24 h. Then, they were moved to a growth chamber with an 8-h dark cycle followed by a 16-h light cycle. With three replications of each variety. About 15 to 20 days after inoculation, symptoms begin to appear, and study their effects on infection type, as documented by [104]. Infection-type data were recorded 20 days after Pst inoculation based on a 0 to 9 scale, as shown in Table 9, as well as Figure 6 according to [22]. Table 9. Seedling infection types of wheat stripe rust [104]. Very susceptible Abundant sporulation without chlorosis Figure 6. Infection type scale of stripe rust on wheat seedlings showing different proportions of sporulation and necrosis, as described by Chen [22].

Disease Management
Three methods were used along with varietal reactions to control stripe rust (biological control, induced resistance, and fungicides) for three wheat cultivars (Misr1, Gimmeiza11, and Sids12) in seedling stage under controlled greenhouse conditions. All management approaches were effectively implemented 24 h before and after the Pst inoculation.

Biological Control
The bio-control agents employed in this study were Bacillus subtilis (accession number LC599401.1) and Pseudomonas putida PCL1760. To prepare the nutrient media, it was first formulated and then subjected to autoclaving at 121 °C and 15 psi for a duration of 15 min. Following inoculation, the media were maintained at a temperature of 37 °C until it was manually harvested. After harvesting, the culture was stored in distilled water at a temperature of 4 °C. For the bacterial suspension, the bacterial strain was combined with 0.25 mL of water in a total volume of 1500 mL. This suspension contained 15 g of dextrose, 0.25 g of chitosan, and 0.25 g of salicylic acid. The ingredients were thoroughly mixed to form a homogeneous suspension, as described in reference [11]. The total number of pots was divided into two groups: the first group underwent pre-inoculation with Pst, while the second group underwent post-inoculation treatment. Each group was separately sprayed with various materials to assess their effects on infection type. For each treatment, three replicates were utilized.

Disease Management
Three methods were used along with varietal reactions to control stripe rust (biological control, induced resistance, and fungicides) for three wheat cultivars (Misr1, Gimmeiza11, and Sids12) in seedling stage under controlled greenhouse conditions. All management approaches were effectively implemented 24 h before and after the Pst inoculation.

Biological Control
The bio-control agents employed in this study were Bacillus subtilis (accession number LC599401.1) and Pseudomonas putida PCL1760. To prepare the nutrient media, it was first formulated and then subjected to autoclaving at 121 • C and 15 psi for a duration of 15 min. Following inoculation, the media were maintained at a temperature of 37 • C until it was manually harvested. After harvesting, the culture was stored in distilled water at a temperature of 4 • C. For the bacterial suspension, the bacterial strain was combined with 0.25 mL of water in a total volume of 1500 mL. This suspension contained 15 g of dextrose, 0.25 g of chitosan, and 0.25 g of salicylic acid. The ingredients were thoroughly mixed to form a homogeneous suspension, as described in reference [11]. The total number of pots was divided into two groups: the first group underwent pre-inoculation with Pst, while the second group underwent post-inoculation treatment. Each group was separately sprayed with various materials to assess their effects on infection type. For each treatment, three replicates were utilized.

Chemical Inducers
Chemical inducers used were Indole Acetic Acid (IAA) (25, 50, and 100 ppm), Oxalic Acid (OA) (250, 500, and 1000 ppm), and Salicylic Acid (SA) (250, 500, and 1000 ppm). Stock solutions from (IAA) at the concentration of 100 ppm were prepared by dissolving 1 g of (IAA) in 10 mL ethyl alcohol and then diluted with dH 2 O to reach the required volume of 1000 mL. Different required concentrations were obtained by diluting the stock solution accordingly. For both OA and SA, the Stock solution of 1000 ppm was produced by dissolving a weight of 1 gm (OA or SA) with distilled water, then completed to 1000 mL. Required concentrations were prepared by diluting the stock solution.

Chemical Fungicides
Seeds of three previously mentioned wheat cultivars were sown in pots (20 seeds for each 7 cm in diameter pots). One week later, seedlings were thinned to 10 wheat seedlings per pot. Chemical control used three systemic fungicides, i.e., Tilt, Montoro, and Sumi-8 (Table 4), was carried out as foliar spray application under controlled greenhouse conditions using different concentrations (125, 250, and 500 ppm) for each fungicide.

Determination of Antioxidants Activities
Extraction was carried out in accordance with [105] for enzyme activity. Spectrophotometric analysis was employed to evaluate the activity of the catalase (CAT) enzyme in accordance with [106]. The calculation of peroxidase (POD) activity was based on the methods described by [107]. Spectrophotochemical analysis was used to measure ascorbate peroxidase (APX) in accordance with [108]. The activity of superoxide dismutase (SOD) was determined by measuring the decrease in absorbance of the superoxide-nitro blue tetrazolium complex, as stated by [109]. Three absorbance measurements at 340 nm were used to track the oxidation of NADPH before measuring the glutathione reductase (GR) activity [110].

Statistical Analysis
Analysis of variance (ANOVA) was accomplished utilizing the software Statistix 8.1 to evaluate the significance of the different treatments. To determine if there were any significant differences, treatments were compared using the LSD (Least Significant Difference) test at a significance level of (p < 0.05).

Conclusions
The study aimed to evaluate the effectiveness of fungicides, chemical inducers, and bacterial bioagents in reducing wheat stripe rust infection in three wheat varieties. Results showed that Tilit fungicide had the best performance in reducing infection type, followed by Montoro and Sumi 8. Salicylic acid was the most effective chemical inducer, with Indole acetic acid also showing positive results. In addition, the bacterial bioagent B subtilis has significantly reduced infection type. The study revealed that the activity of antioxidant enzymes CAT, APX, GR, SOD, and POX, in infected wheat plants can be modulated by fungicides, chemical inducers, and bacterial bioagents. The study demonstrated varying effectiveness in managing stripe rust depending on factors such as wheat variety, inducer type, concentration, and bacterial species used. The research highlights the significant impact of wheat variety selection on the efficacy of applied management approaches, emphasizing the importance of using resistant wheat varieties and implementing effective strategies like bioagents and fungicides to control stripe rust effectively. All tested fungicide alternatives, including chemical inducers, bioagents, and resistant varieties, provide a sustainable and environmentally friendly method to induce SAR in plants, effectively defending against stripe rust disease. Future studies should focus on understanding the genetic basis of resistance and developing sustainable management approaches. Overall, the study highlights the potential of fungicides, chemical inducers, and bioagents in enhancing wheat's antioxidant system and inducing resistance against stripe rust.