Molecular Biology, Composition and Physiological Functions of Cuticle Lipids in Fleshy Fruits

Fleshy fruits represent a valuable resource of economic and nutritional relevance for humanity. The plant cuticle is the external lipid layer covering the nonwoody aerial organs of land plants, and it is the first contact between fruits and the environment. It has been hypothesized that the cuticle plays a role in the development, ripening, quality, resistance to pathogen attack and postharvest shelf life of fleshy fruits. The cuticle’s structure and composition change in response to the fruit’s developmental stage, fruit physiology and different postharvest treatments. This review summarizes current information on the physiology and molecular mechanism of cuticle biosynthesis and composition changes during the development, ripening and postharvest stages of fleshy fruits. A discussion and analysis of studies regarding the relationship between cuticle composition, water loss reduction and maintaining fleshy fruits’ postharvest quality are presented. An overview of the molecular mechanism of cuticle biosynthesis and efforts to elucidate it in fleshy fruits is included. Enhancing our knowledge about cuticle biosynthesis mechanisms and identifying specific transcripts, proteins and lipids related to quality traits in fleshy fruits could contribute to the design of biotechnological strategies to improve the quality and postharvest shelf life of these important fruit crops.


Introduction
Fleshy fruits are horticultural commodities with an edible and thick mesocarp or another tissue that are rich in water, sugars, fiber, minerals, vitamins, and antioxidant compounds. That is why fleshy fruits are a valuable source of nutrients for humanityespecially for lesser developed countries, where they are relatively accessible-and their production represents an important economic resource [1]. It has been predicted that global climate change will increase droughts in the following decades, reducing available water for agriculture [2]. In this scenario, it is necessary to develop biotechnological and agronomical strategies to develop and grow plants that are adapted to grow under conditions of limited water supply without affecting fruit productivity and quality. Because of that, it is necessary teins playing a role in fleshy fruit cuticle biosynthesis are included and discussed. All this knowledge about the cuticle biosynthesis mechanism and identifying specific transcripts, proteins and metabolites related to quality traits in fleshy fruit-producing plants could contribute to developing biotechnological strategies to improve plant drought adaptation and reduce water loss for these economically and nutritionally important horticultural commodities.

Cuticular wax
Triterpenoids, alkanes (C 31 and C 33 ) and fatty acids [49] Cutin 9(10),16-dihydroxy hexadecanoic acid and 9,10-epoxy-18-hydroxy octadecanoic acid Jujube (Ziziphus jujuba) Cuticular wax Fatty acids, primary alcohols and alkanes [50] Goji berry (Lycium barbarum) Cuticular wax Fatty acids, alkanes and primary alcohols [51] Generally, a high proportion of alkanes and triterpenoids, followed by other verylong chain (VLC) aliphatic compounds, are found in the cuticular wax of fruits such as tomato, apple, sweet cherry, peach, pear, pepper and pitahaya [6]. Triterpenoids are the most prominent wax compounds in grape, olive and blueberries, whereas VLC aliphatics are in minor proportions [6]. In fruits such as orange, mandarin, lemon and jujube, VLC aliphatic waxes are found in significantly greater amounts than triterpenoids. 9(10),16dihydroxy hexadecanoic acid is the main cutin component of tomato, apple, sweet cherry, drupe fruit, pepper, olive, guava and pitahaya. In fact, except for citrus fruits, 9(10),16dihydroxy hexadecanoic acid is one of the most prevalent constituents of cutin in fleshy fruits. Nevertheless, the proportions of fruit cuticle components are very dynamic, and they vary during fruit development and ripening.

Changes in Cuticle Composition during Fleshy Fruit Development and Ripening
Even though patterns of development and growing vary significantly among different types of fleshy fruits, they present a similar development and growing phenomena in which the first phase is characterized by many cycles of cell division and differentiation, with a low growth rate [4]. Subsequently, a phase of cell expansion begins, leading to a significant increase in fruit volume and mass during fruits' development, which is characterized by the accumulation mainly of water and soluble solids [52,53]. Physiological maturity is attained when the fruit has reached its maximum size. After that state, the fruit ripening phenomenon is initiated [4].
The function of fleshy fruits is to protect the seed when the embryo has not been fully developed and promote fruit consumption and the dispersal of the seed once the embryo has been developed, so it is mature and ready to germinate and grow [1]. The depolymerization of the cell wall and changes in cuticle composition occur during fruit ripening. Once the fruit has ripened and during postharvest, these changes could increase softening, water loss and susceptibility to pathogen infections. Table 2 summarizes the cuticle composition changes recorded during fleshy fruit development phenomena. Next, studies carried out in mature fruits, during fruit development and ripening are summarized and discussed.

Tomato
In the case of the tomato fruit (S. lycopersicum) "Ailsa Craig" variety, the amount of wax of VLC aliphatic compounds increases continually throughout its development. During the developmental phenomena, the main components of cuticular waxes are alkanes and triterpenoids, but alkanes show the most significant increase. When compared with other species, an apparent particularity of tomato fruit waxes is the presence of large amounts of VLC unsaturated compounds (i.e., alkenes and alken-1-ols), which increase throughout fruit development and ripening [18]. Table 2. Cuticle composition changes recorded during fleshy fruits development.

Fruit Scientific Name Observation References Tomato
Solanum lycopersicum L. Continuous increase of alkanes, triterpenoids, and cutin. [18] Orange Citrus sinensis L. Osbeck Increasing alkanes amount. Decreasing fatty acids and aldehydes amount. Increasing epicuticular wax, terpenoid and hentriacontane amounts at the earlier stage. [22]
Decreasing of triterpenes and cutin amount. [30] Nectarine Prunus persica L. Batsch Increasing triterpenoids and cutin amounts at earlier stages, then they decrease until maturity. Increase in alkanes amount at the later stages. [32] Drupe fruit Prunus laurocerasus L. Increasing cutin, triterpenoids and cinnamic acid amounts at later stages. [33] Pear

Pyrus bretschneideri
Increasing fatty acids amount at earlier stages and then decreases. Continuous increase of triterpenoids amount. [35] Blueberry Vaccinium corymbosum and V. ashei Continuous increase of total wax and triterpenoids amounts at ripening. Decrease in the relative content of diketones. Increase in the relative content of aldehydes, primary alcohols, fatty acids and alkanes. [40]

Vitis vinifera
Increasing triterpenoid, primary alcohols and aldehydes amounts at early stages and decreasing at ripening. Increase alkyl esters and fatty acids amount at later stages. [42][43][44] Olive
The main constituent of cuticular wax of all seven Solanum species IS alkanes, including as the most common and abundant nonacosane (C 29 ) and hentriacontane (C 31 ), but the total wax coverage of all the six wild species is higher compared with S. lycopersicum. The main non-aliphatic constituents identified were the pentacyclic triterpenoids amyrins. Nevertheless, triterpenoids represent a significant proportion of total wax composition only in S. lycopersicum, S. pimpinellifolium and S. cheesmaniae [20].
The tomato fruit mutants ripening inhibitor (rin), non-ripening (nor) and the landrace "Alcobaca", which are characterized AS having a delayed or absent ripening process and substantially less softening, have higher amounts of wax and cutin than the typical tomato fruit ripening "Ailsa Craig". A higher relative proportion of C 18 monomers than C 16 is shown in rin, nor and "Alcobaca" during development than in "Ailsa Craig". It has been hypothesized that cutin with a large amount of C 16 oxygenated fatty acids has a more rigid cuticle than cuticles constituted by an equal mixture of C 16 and C 18 oxygenated fatty acids in the cutin, which are more elastic. Furthermore, cuticle elasticity has been attributed to higher trihydroxy fatty acid content in cutin. Nevertheless, this hypothesis needs the support of more experimental data [18].

Citrus
Very long chain fatty acids, alkanes and primary alcohols are the main constituents of the sweet orange cuticle (Citrus sinensis [L.] Osbeck) cultivar "Navelate" [22]. The epicuticular wax of the sweet orange fruit (C. sinensis) cutivar "Bingtang" is mainly composed of fatty acids, followed by alkanes. Intracuticular waxes are mainly composed of fatty acids, triterpenoids and alcohols. For cutin, the predominant constituents are cis-9-hexadecenoic acid and cinnamic acid [23]. In "Navelate" sweet orange, cuticle thickness slightly decreases during development. The total epicuticular wax load significantly increases only at the breaker (Bk) stage but remains unchanged at mature green (MG), colored (C) and full-colored (FC) stages. During sweet orange fruit development, VLC alkanes increase, whereas VLC fatty acids and VLC aldehyde proportion decrease [22]. Epicuticular waxes of the navel orange (C. sinensis [L.] Osbeck) cultivar "Newhall" are mainly composed of fatty acids, followed by alkanes and primary alcohols, whereas terpenoids are only present in low amounts. In contrast, intracuticular waxes are mainly composed of cyclic wax compounds, such as the triterpenoids, whereas aliphatic compounds are in low concentrations. In early navel orange fruit development stages, a low variety of epicuticular wax components is observed, but compound variety increases in the late stages. The main fatty acid constituents increase with further development [21].
The "Glossy Newhall" mutant displays a glossier peel than its wild-type navel orange (C. sinensis [L.] Osbeck cv. "Newhall"). During development, the total cuticular wax increases in navel orange and "glossy Newhall" with the same deposition pattern; nevertheless, "Glossy Newhall" presents a significantly lower wax load [56]. The main cuticular constituents of both navel orange and "Glossy Newhall" mature fruits are triterpenoids, followed by aldehydes, alkanes and fatty acids, but in "Glossy Newhall" mutant, aldehydes and alkanes are present in a lower amount [56].
During wild-type navel orange development, the total epicuticular wax increases from 60 to 120 days after flowering (DAF), decreases from 120 to 150 DAF and increases from 150 to 210 DAF. In contrast, in the "Glossy Newhall" mutant, the increase from 150 to 210 DAF does not occur [21]. These differences are consistent with the loss of wax crystals phenotype observed in "Glossy Newhall", which have been associated with a decrease in the aldehydes and alkanes components of navel orange cuticle [21,56]. It has been suggested that cuticular crystals are mainly composed of VLC aliphatic constituents, especially by alkanes.
Similar to navel orange "Newhall" [56], the cuticular wax of mandarin (Citrus unshiu) "Satsuma" mature fruit is mainly composed of aldehydes, alkanes, fatty acids and primary alcohols. Nevertheless, navel orange "Newhall" has a higher total cuticular wax and epicuticular wax amount than mandarin "Satsuma". Furthermore, in cultivar "Newhall", a significantly high amount of hentriacontane (C 31 ), C 24 and C 26 chain length fatty acids and aldehydes are observed. In the case of terpenes, wax constituents, farnesol and squalene are only observed in navel oranges but not in mandarin fruit [24].
The main components in mandarin "Satsuma" fruit (C. unshiu) epicuticular wax are fatty acids, followed by alkanes and terpenoids. For intracuticular wax, the predominant constituents are terpenoids, followed by alkanes and fatty acids. The main constituents of cutin are cinnamic acids, followed by hexadecanedioic acid (C 16 ) and hexadecanoic acid (C 16 ) [25]. In mature green lemon fruits (Citrus limon Burm. f. Eureka), the main components of epicuticular wax are alkanes (C 23 -C 33 ), with hentriacontane (C 31 ) as the major component [26].

Apple
At the completely ripe stage, the cuticular waxes of apple fruit (Malus domestica Borkh.) late-season "Florina" and early-season "Prima" cultivars are mainly composed of triterpenoids, which represent 70% and 83% of the total wax contents, respectively, of which ursolic acid and oleanolic acid are the most prominent. In "Florina", the principal VLC aliphatic compounds are primary alcohols, whereas in "Prima", these are secondary alcohols, fatty acids and alkanes. A slight but not significant difference in total wax amounts between the two cultivars is observed. Nevertheless, "Florina" presents a higher number of fatty acids, esters, primary alcohols and aldehydes than "Prima" cultivar fruits [29].
For the apple cultivars "Stark", "Golden", "Mutsu", "Golden Delicious", "Camachi", "Huahong", "Jona Gold", "Red Star", "Ralls" and "Mashima Fuji", the main wax constituents at harvest are alkanes, followed by fatty acids and primary alcohols. Terpenoids and aldehydes were only observed in the "Red Star" cultivar. Nevertheless, after 49 days of postharvest storage at room temperature and 90% relative humidity, terpenoids and aldehydes were found to be present in the 10 cultivars [59]. These analyses show that, like orange fruit, apples belonging to different cultivars can exhibit marked differences in cuticle composition at harvest and during the postharvest storage of apples.

Prunus spp.
The main constituents of the cuticular wax of mature sweet cherry fruits (Prunus avium) cultivars "Rainier", "Bing", "Lapins", "Kordia" and "Regina" are triterpenes, alkanes and alcohols with 76%, 19% and 1% of the total wax, respectively. Further, nonacosane (C 29 ) is the most prominent alkane in all five cultivars [60]. Ursolic acid is the most abundant triterpene, accounting for 60% of total triterpenes. For alcohols, the secondary alcohol nonacosan-10-ol is the most abundant. As reported for tomato [18], mature sweet cherry fruit cutin is mainly composed of C 16 monomers. Out of those, the most abundant is 9(10),16-dihydroxy hexadecanoic acid [30]. Wax and cutin accumulation increase during the first stages of development, but they markedly decrease at the latest developmental stages. During development, triterpenes decrease, but alkanes and alcohols remain practically unchanged. In the case of cutin, a decrease in the total mass of cutin during sweet cherry development due to a low deposition of the main cutin constituents was observed [30].
Cuticular waxes of cherry fruit (P. avium L.) cultivars "Celeste" and "Somerset" are mainly composed of ursolic acid, nonacosane (C 29 ), linoleic acid and beta-sitosterol [61]. Unlike "Rainier", "Bing", "Lapins", "Kordia" and "Regina" cultivars [30], cutin composi-tion in "Celeste" and "Somerset" is mainly composed of C 18 monomers. At commercial harvest, "Somerset" cherries are firmer, juicer, have higher quality indicators and have higher yields of cuticle than "Celeste" cherries. "Somerset" cuticles have large amounts of the cuticular wax phytosterols and alkanes, with sizes between C 27 to C 31 of chain length, and higher amounts of cutin than "Celeste". Altogether, the above-mentioned data strongly suggest an association between cuticle yields and composition in maintaining fruit quality at harvest [61].
Nectarine (Prunus persica L. Batsch) cuticular waxes of "Summergrand" and "Zéphir" varieties are mainly composed of the triterpenoids oleanolic and ursolic acids. Minor compounds in nectarine wax are VLC aliphatics, mainly composed of alkanes, alcohols and fatty acids. Total waxes are low at the first stage of nectarine development, accumulate strongly at the middle stage, decrease at the end of the middle stage and slightly increase again near ripening. An early active cuticle accumulation process is observed during the first growth period, mainly due to triterpenoid deposition and cutin formation. On the other hand, the increase in waxes close to the final development and ripening stage consists mainly in alkane accumulation [32].
In agreement with that reported in other fruits of the genus Prunus [30,32,60], cuticular waxes of drupe fruit (Prunus laurocerasus L.) are mainly composed of pentacyclic triterpenoids, which account for 87% of total waxes, with ursolic acid the most prominent component. The aliphatic wax compounds are mainly composed of fatty acids, alkanes and primary alcohols, with about 10% of total wax. Nonacosane (C 29 ) and triacontanoic acid (C 30 ) are the main aliphatic compounds during drupe fruit development. The cutin is mainly made of 9(10),-dihydroxy hexadecanoic acid, 9,10-epoxy-18-hydroxy octadecanoic acid and 9,10,18-trihydroxy octadecanoic acid, comprising more than 70% of the total cutin monomers. At later stages of development, drupe shows higher amounts of total cutin and triterpenoids and a higher abundance of 3,4-dihydroxy cinnamic acid than at earlier stages [33].

Pear
The epicuticular wax of mature pear (Pyrus spp.) fruits from the species P. communis Linn., P. ussuriensis Maxim., P. sinkiangensis Yü., P. bretschneideri Rehd. and P. pyrifolia Burm Nakai is mainly composed of alkanes, primary alcohols and terpenoids, with 40.72%, 24.47% and 11.8% of the total content, respectively. Alkanes of 28 to 31 carbon chain lengths are the most abundant, while the alcohol triacontanol (C 30 ) is the most abundant [37]. The cuticular wax of Asian pear cultivars "Kuerle", "Xuehua" and "Yuluxiang" are very similar and are mainly composed of alkanes and primary alcohols. The "Kuerle" cultivar shows a higher cuticular wax amount than "Xuehua" and "Yuluxiang", with "Xuehua" the cultivar with the lowest amount. The most abundant wax fractions of "Kuerle" and "Yuluxiang" are alkanes and primary alcohols, whereas in the case of "Xuehua", these are primary alcohols and terpenoids [36].
The cuticular wax of wild-type "Dangshansuli" pear fruit (Pyrus bretschneideri) and its russet skin mutant "Xiusu" is mainly composed of alkanes, alkenes, fatty acids, alcohols and terpenes. Alkanes are the main compounds during pear fruit growth and development, with nanocosane (C 29 ) as the major component. There was no difference between alkane content in both "Dangshansuli" and "Xiusu" cultivars at early stages of development. Nevertheless, a higher content of alkanes is synthesized in "Dangshansuli" fruits during growth. Nonacosane (C 29 ) content increases significantly in "Dangshansuli" fruits during ripening, becoming the most abundant alkane compound during "Dangshansuli" pear development [35].
Fatty acid content, mainly composed of hexadecanoic and octadecanoic acid, is higher during the early stages of "Dangshansuli" and "Xiusu" pear fruit development, decreasing in the middle and late stages. In contrast, for triterpenoids, mainly composed of alphaglycosidal and beta-glycosidal, a continuous increase in relative content is shown during all development stages of both cultivars. Fatty alcohol content is higher in "Xiusu" pear than in "Dangshansuli", and this difference is more obvious during the latest stage of the ripening phenomena. A gradual increase in cuticle thickness is present in "Dangshansuli" fruit, whereas no clear deposition pattern is observed for "Xiusu" fruit [35].
Similarly, the main constituents of cuticular wax of Asian pear fruit (P. bretchneideri Rehd) cultivar "Pingguoli" are alkanes, fatty acids and triterpenoids, accounting for 25.9%, 27.8% and 33.6% of the total waxes, respectively. Straight-chain odd-numbered compounds are the main alkane components, and out of these, nonacosane (C 29 ) and heptacosane (C 27 ) are the most prominent. Fatty acids include saturated and unsaturated straight-chain odd and even-numbered compounds. In contrast, for triterpenoids, alpha-amyrin is the most abundant [34]. Changes in total wax content, relative amount and carbon chain length have been observed during "Pingguoli" pear fruit development. In earlier stages, alkanes and fatty acids are the main wax compounds, whereas alkanes and triterpenoids predominate in later stages. Total wax content increases abruptly in later stages of development, while a reduction in alkane proportion is shown during development [62].

Berries (Vaccinium spp.)
At the ripe stage, the cuticular wax of berries of the Vaccinium genus is mainly composed of triterpenoids, but significant variations in composition have been shown between berries belonging to different species [63] and among cultivars [38]. Through the analysis of nine blueberry cultivars belonging to the species Vaccinium corymbosum (cv. "Misty", "O'Neal", "Sharpblue", "Brigitta", "Darrow" and "Legacy") and V. ashei (cv. "Britewell", "Premier" and "Powderblue"), it was shown that their cuticular waxes are mainly composed of triterpenoids and beta-diketones, accounting for 64.2% and 16.4% of the total wax, respectively. Nevertheless, the total wax composition differs considerably between cultivars. Hentriacontan-10,12-dione was only detected in V. corymbosum, whereas tritriacontan-12,14dione was only detected in V. ashei. Except for beta-diketones, VLC aliphatic compounds are minor constituents of cuticular wax. For aldehydes, fatty acids and primary alcohols, the main constituents are C 28 and C 30 compounds, whereas for alkanes, the main constituent is C 29 [39].
The cuticular wax of blueberry cultivars "Legacy" (V. corymbosum) and "Brightwell" (V. ashei) is composed mainly of oleanolic and ursolic acid, followed by hentriacontane-10,12-dione and tritriacontane-12,14-dione, respectively. During ripening, the total wax amount and the triterpenoid content increase continuously for both cultivars; nevertheless, "Brightwell" shows a higher wax content than "Legacy". A decrease in the relative content of diketones occurs during the ripening of both blueberry cultivars with an increase in VLC aldehydes, primary alcohols, fatty acids and alkanes [40]. At ripening stages, the triterpenoid wax fraction of blueberry (V. corymbosum L.) cultivars "Brigitta" and "Duke" is mainly composed of lupeol, oleanolic acid and ursolic acid, whereas alpha-amyrin is only observed in the "Brigitta" cultivar [38]. Altogether, these studies showed a cultivardependent cuticular wax deposition and composition for blueberry fruits.
The most prominent components of lingonberry (V. vitis-idaea L.) and bog bilberry (V. uliginosum L.) waxes are triterpenoids and fatty acids, respectively, representing more than 50% of the total wax. In contrast, for bilberry (V. myrtillus L.), the triterpenoids and fatty acids mixture comprises more than 70% of the cuticular wax composition [41]. In the first stages of development, when berries are in stages of intensive growth, steroids are in very low amounts in the cuticle, but they increase during the stage of maturation once the berries have reached their final size. A species-specific pattern of wax composition has been observed during berries' fruit development, with similarities among phylogenetically related species [64].
Both wild-type bilberry (V. myrtillus) and its "glossy mutant" GT have similar patterns of cuticular wax deposition and composition through development, consisting of a decrease in triterpenes and an increase in aliphatic compounds. The dominant compounds during bilberries' development are triterpenoids and fatty acids. Despite no significant differences in total wax amount being detected between wild-type and GT during development, the glaucous phenotype could be due to a higher proportion of triterpenes and a lower proportion of fatty acids and ketones present in bilberry GT [54].

Grape
Cuticular waxes of grapes (Vitis vinifera L.) varieties "Müller Thurgau" and "Blauer Spätburgunder" are mainly composed of oleanolic acid, but this compound is absent in epicuticular wax. Triterpenoid deposition begins and increases early in grapevine fruit development and decreases during ripening. Except for alkyl esters and fatty acids, whose deposition does not decrease during ripening, VLC aliphatic compounds have the same pattern of deposition to triterpenoids, but they are present in much smaller amounts [42]. Like oranges [21,56], the epicuticular wax crystals of grapevine fruit are formed apparently only by VLC aliphatic compounds. The main components of epicuticular wax are alcohols, which are present in higher amounts in the first stages of development and decrease gradually during grapevine development. In contrast, alkyl esters and fatty acids are in much smaller amounts in the first stages, but they increase in the last stage of development [42].
The triterpenoid wax composition of the eight grape (V. vinifera) cultivars "Chasselas", "Gewurztraminer", "Muscat d'Alsace", "Pinot auxerrois", "Pinot gris", "Pinot noir", "Riesling" and "Sylvaner" are quite similar. Nevertheless, they exhibit differences during the grapefruit ripening phenomena. Oleanolic acid and oleanolic aldehyde are the most prominent constituents of the grape cuticle triterpenoid fraction for all eight cultivars. In earlier stages of ripening, a high level of total triterpenoids is observed, with a gradual decrease with the progression in development. "Gewurztraminer" shows an exceptionally higher amount of sitosterol than other cultivars, whereas 3,12-oleandione was only present in the "Muscat d'Alsace" cultivar [43].
The total aliphatic amount is highest at the early stages and slightly decreases at the end of grape berry "Gewürztraminer" cultivar development. Total triterpenoids, VLC aldehydes and VLC primary alcohols show a similar pattern of deposition to the total aliphatic amount, but their decrease is more obvious at the end of development. In contrast, VLC fatty acids and VLC esters increase during development. Alkanes are minor constituents of the cuticular wax of berries and show no significant changes during grape berry development [44].
Both total cuticular wax and epicuticular wax of mature grape berry (V. vinifera) cultivars "Kyoho", "Muscat Hamburg", "Redglobe" and "Zuijinxiang" are mainly composed of terpenoids, alcohols, fatty acids and esters. In agreement with the findings reported for other grape cultivars [42,43], the most abundant terpenoid among the four cultivars analyzed in this study is oleanolic acid. Grape berry cuticular terpenoids are mainly present in intracuticular wax, fatty acids are mainly present in epicuticular wax, whereas hydrocarbons are equally distributed in intra and epicuticular wax [45].

Pepper
A study carried out in 50 diverse pepper (Capsicum spp.) accessions, including the genera C. annuum, C. chinense, C. baccatum, C. pubescens and C. frutescens, recorded that the main wax constituents are alkanes and nonaliphatic compounds including triterpenoids and phytosterols. The amount of alkanes ranges from 13% to 74% of the total waxes, with nonacosane (C 29 ) and hentriacontane (C 31 ) the most abundant alkanes. Nonaliphatic compounds range from 10% to 76%, with the main components being alpha and betaamyrin, glutinol and lupeol. Pepper cutin comprises C 16 and C 18 fatty acids and their oxygenated derivatives, p-coumaric and m-coumaric acids. Similar to as observed for tomato [18] and sweet cherry [30], the main cutin constituents of pepper fruit are C 16 monomers, ranging from 54% to 87%. Among those, the most important is 9(10),16dihydroxy hexadecanoic acid, ranging from 50% to 82% of total cutin [46,65].

Pitahaya
At the mature stage, the wax of the pitahaya fruit (Hylocereus polyrhizus) cultivar "Hongshuijing" mainly comprises triterpenoids, followed by alkanes and fatty acids. Alkanes range from C 20 to C 35 of chain length, dominated by hentriacontane (C 31 ) and tritiacontane (C 33 ), whereas the most prominent triterpenoids are uvaol, lupenon, beta-amyrinon and beta-amyrin. Cutin comprises 9(10),16-dihydroxy hexadecanoic acid and 9,10-epoxy-18hydroxy octadecanoic acid. The cuticle of pitahaya presents a wax/cutin ratio of 0.6 and compounds with an average chain length (ACL) of 30.5. Authors argue that ACL is higher than that reported for other petal and fruit cuticles and similar to that reported for leaf cuticles of other species [49].
One of the most abundant components of fleshy fruits is water, which is essential for fruit metabolism, fruit development and size increase [53]. In fleshy fruits, most water loss occurs through transpiration through the fruit surface [53], which is covered by the cuticle. It has been suggested that high wax/cutin ratios and compounds with high ACL could be a physiological adaptation to enhance the transpiration barrier of the fruit cuticle to withstand arid environments [49]. In addition, a high triterpenoids content could strengthen the mechanical support and plasticity of the cuticular membrane, protecting the fruit cuticle from the harmful effects of high-temperature stress [49]. In the next section of this review, studies regarding the physiological function of cuticles at harvest and during postharvest in fleshy fruits are described and discussed, mainly regarding fruit quality maintenance and water loss reduction.

Water Loss
The loss-of-function mutation of beta-ketoacyl-CoA synthase (KCS) in tomato fruit, designated as SlCER6 mutant, causes a decrease of alkanes and aldehydes longer than C 30 and an increase of intracuticular triterpenoids in the cuticle. An increase in permeability has been observed due to the reduction of the intracuticular VLC aliphatic compounds. The authors suggest that the transpiration barrier is mainly determined by the proportions of VLC aliphatic constituents and triterpenoids of the intracuticular waxes rather than epicuticular wax's VLC aliphatic composition [19].
During tomato fruit development, SlCER6 shows a higher cuticle amount than wild type "MicroTom". Nevertheless, a reduction in VLC alkanes and an increase in cyclic triterpenoids, together with an increase in water loss, are shown in waxes of SlCER6 [66]. Positional sterile (ps) mutant of tomato exhibits a similar phenotype to SlCER6, which is defective in the elongation of VLC fatty acids (VLCFA). No difference in cutin composition, cutin accumulation and cuticular wax accumulation between the mutant ps and its wild type is observed. Nevertheless, the wild type exhibits a remarkably higher level of alkanes and aldehydes in cuticular waxes and a remarkably lower level of esters and triterpenoids than ps fruits, with hentriacontane (C 31 ) the most prominent alkane constituent in wild-type tomato waxes. Furthermore, a reduction in growth and weight and an increase in water loss are observed in ps fruits [67].
Studies with tomato fruit strongly support the statements that (i) cuticle rather than cell wall modifications could have a significant role in the reduction of the softening rate in fleshy fruits [12], (ii) waxes are the main cuticular structures that regulate the permeability in fleshy fruit peels [19,66], and that (iii) a specific change in cuticle wax composition rather than an increase in thickness or the total amount of cuticle has a more significant effect on the properties of fleshy fruits [19,66], especially for the reduction of water rate loss. Furthermore, several studies showed that epicuticular waxes, rather than intracuticular waxes, have a significant effect on fleshy fruit cuticle permeability [45], although other studies have shown opposite results [19]. Therefore, more experimental evidence is needed to fully elucidate the role of epicuticular and intracuticular waxes in the permeability properties of the cuticle.
In "Navelate" sweet orange, the total epicuticular wax load significantly increases in the earlier stage of development, breaker (Bk), but remains unchanged in the later stages, namely mature green (MG), colored (C) and full-colored (FC). Terpenoids are mainly present in the Bk stage, and a notorious increase of hentriacontane (C 31 ) happens in this stage. Cuticle transpiration and permeability are lower in the first two stages of development (Bk and MG), suggesting that alkanes and triterpenoids have a relevant function in controlling cuticle permeability during sweet orange fruit development [22].
It had been suggested that the early rise of epicuticular crystals, alcohols and triterpenoids observed at the beginning of the development of grapevine fruit could be due to a mechanism to protect the underlying cuticle from the exponential increase in volume and rapid surface expansion [42]. Like sweet orange [22] and grapevine [42], during nectarine development, an early active cuticle accumulation process is observed during the first growth period, mainly by triterpenoid deposition and cutin formation. Authors suggest that the increase in wax accumulation during the early stages of development allows the fruit to reduce water loss at harvest and during postharvest conditions [32].
The removal of epicuticular waxes in grape berry induces higher water loss and softening, indicating that epicuticular waxes could play a pivotal role in the postharvest quality of grape berry by reducing the water loss rate [45].
During postharvest storage, alkanes and aldehydes of Korla pear fruit cuticular waxes negatively correlate with weight loss, whereas fatty acids and alcohols have a positive correlation. The composition and morphological analysis of the Korla pear cuticle suggests that alkanes and aldehydes could contribute to wax crystal formation and consequently fruit water retention in Korla pear during postharvest storage [68].
Water deficit induces total aliphatic waxes accumulation at the end of grape berry development, accompanied by an obvious increase of VLC esters. This increase in cuticular VLC esters could be due to an adaptation to low water availability in grape berries. Nevertheless, these changes of composition do not cause a significant change in the berry transpiration rate [44]. On the other hand, it has been observed that water deficit leads to a lower triterpenoids/total aliphatic wax ratio in green and red berries.
The apple fruit (M. domestica) cultivar "Florina" shows higher amounts of fatty acids, esters, primary alcohols and aldehydes than the "Prima" cultivar. However, it was not possible to establish a relationship between water permeability and cuticle composition for both cultivars [29].
It has been reported that the cuticle of physiologically mature guava fruit (P. guajava L.) has a large abundance of cyclic components, epoxy, hydroxy and carboxyl functional groups, and a relatively smaller amount of ACL of acyclic components than cuticles of other species and organs, which has been related with the low ability to reduce the transpiration of guava fruit cuticle [48]. In agreement, the cuticle of mature pitahaya fruit (H. polyrhizus) presents a wax/cutin ratio of 0.6 and an ACL of 30.5. Authors argue that the ACL is higher than that reported for other petal and fruit cuticles, similar to that reported for leaf cuticles of other plant species. They attribute these changes to the enhancement of the transpiration barrier of the pitahaya cuticle to withstand arid environments [49].
Cuticle composition analyses of pepper species C. annuum and C. chinense, which have high and low postharvest water loss rates, respectively, showed that postharvest fruit water loss is associated with the cuticle composition and the ratio of the wax constituents rather than the total wax amount. It has been shown that an increase in the total amounts of triterpenoid and sterols in the cuticular waxes of pepper fruits could increase postharvest water loss, while an increase in the amounts of primary alcohols and alkanes could reduce it-specifically, an increase of C 29 and C 31 alkanes [46].
In the case of cutin, it has been shown that water loss has a negative association with the C 16 /C 18 ratio. The increase of total C 16 monomers and 9(10),16-dihydroxy hexadecenoic acid in the cutin appears to induce postharvest fruit water loss in pepper fruits [46]. During olive development, a slight increase in the ACL of VLC acyclic compounds was observed, with a slight reduction of the C 16 /C 18 ratio of cutin monomers; nevertheless, no differences were observed in cuticular permeability and water loss during olive fruit development [47].
The tomato cultivar "Delayed Fruit Deterioration" (DFD) exhibits a remarkable delayed softening at postharvest and remains firm for at least six months at fully ripe stages, but it otherwise undergoes a normal ripening process. No significant differences were found in the patterns of wall polysaccharide modification and the expression of genes related to wall degradation between DFD and the normal softening AC cultivar. However, DFD showed a lower transpiration rate, lower water loss, higher cellular turgor, higher firmness and a thicker and more swelled pericarp at ripening stages than AC [12].
Although DFD and AC have similar cuticle anatomies, DFD shows a stronger cuticle and a higher total wax amount. Besides, a significant increase in alkadienes in red ripe fruits is shown in DFD, but not in AC. Based on these data, the authors suggested that the delay of the softening phenotype could be due to the significant increase in alkadienes and the absence of naringenin in the cuticular wax of DFD, which has been associated with both mechanical support and turgor maintenance through water loss reduction [12]. In agreement, it has been shown that water stress increases fruit firmness and total cuticle, total wax and triterpenoids amounts, whereas it decreases cuticle permeability, transpiration rate and the relative amount of VLC alkanes in AC tomato fruits, which suggests an association between cuticle characteristics, transpiration and fruit firmness. In addition, an increase in total cutin amounts and 9(10),16-dihydroxy hexadecenoic acid was shown in AC [9].
Water stress does not affect cuticle permeability and thickness in DFD but induces an increase in both characteristics in AC tomato fruits. Actually, after water stress, the cuticle of AC shows similar characteristics to that of DFD, which suggests a change in cuticle metabolism in response to low water availability conditions in tomato [9]. It has been suggested that high amounts of alkanes and low amounts of triterpenoids in cuticles reduce the transpiration of fruit surfaces in fleshy fruits [46,66,67]. This study showed that cuticle permeability was positive and negatively correlated with the total cutin amount and the proportion of VLC alkanes in AC fruits, respectively. Besides, the levels of cyclic triterpenoids were positively correlated with the water loss rate [9].
The cuticles of mango cultivars "Kent", "Tommy Atkins", "Manila", "Ataulfo", "Criollo" and "Manila" exhibit different epicuticular wax deposition patterns, architectures and cutin compositions at the mature-green stage and during postharvest, accompanied by different water transpiration rates, firmness and fruit quality appearance. During postharvest, the mango "Tommy" cultivar has a higher wax deposition and cuticle thickness and exhibits a lower percentage of weight loss and less visual deterioration than the "Criollo" cultivar. Authors suggest that cuticle characteristics observed in premium cultivars such as "Tommy" are potential factors that could be associated with fruit quality preservation during postharvest storage [69].

Postharvest Storage
The amounts of both epi-and intracuticular waxes of mandarin "Satsuma" fruit (C. unshiu) increase after 20 days of room temperature (25 • C) storage, but they decrease after 40 days. A decrease in terpenoids and fatty acids and an increase in the proportion of alkanes is shown after 40 days of storage. Further, the total cutin amount decreases during postharvest storage, but the proportion of almost all cutin components remains stable [25]. The navel orange cultivar "Newhall" has a higher total cuticular wax and epicuticular wax amount than mandarin "Satsuma". Notably, a significantly higher amount of hentriacontane (C 31 ), and C 24 and C 26 chain length fatty acids and aldehydes is observed. During seven days at 25 • C and 40-50% relative humidity of postharvest conditions, navel orange exhibited a lower weight loss than mandarin [24], which could be due to the difference in the epicuticular wax content and composition observed.
During postharvest, the peach melting cultivar "October Sun" shows a more dramatic firmness loss and weight loss than the non-melting cultivar "Jesca". At harvest, wax percentages are similar in both cultivars, whereas cutin percentages are significantly higher in "October Sun" than in "Jesca". Five days after harvest, the total wax and cutin yields remain unchanged in "October Sun", whereas in the "Jesca" cultivar, both wax and cutin significantly increase. At commercial harvest, the ratio of alkanes to triterpenoids and sterols is 0.31 in "October Sun" and 0.65 in "Jesca". These data strongly suggest that the increasing alkanes play a role in maintaining the firmness and reducing weight loss in non-melting "Jesca" cultivars [31].
The total wax content of Korla pear fruit increases during 30 days of postharvest storage, but it decreases at day 90. Furthermore, alkanes and aldehydes show a negative correlation with weight loss of Korla pear during postharvest, whereas fatty acids and alcohols have a positive correlation [68], suggesting that alkanes play an important role in reducing water loss. In apple cultivars "Stark", "Golden", "Mutsu", "Golden Delicious", "Camachi", "Huahong", "Jona Gold", "Red Star", "Ralls" and "Mashima Fuji", a decrease in total cuticular wax amount is observed after 49 days of postharvest storage, with a decrease in alkanes and primary alcohols and an increase in fatty acids proportion. A relationship between weight loss rate and total wax, total alkanes and C 54 alkanes is shown in all the 10 cultivars, suggesting that alkane biosynthesis is essential for reducing weight loss during postharvest storage in apples [59].
Through the cuticle wax analysis of 35 cultivars of pear (Pyrus spp.) mature fruits, it has been shown that the cultivar with the longest postharvest storage period also showed a higher wax concentration [37]. In berries, lingonberry fruit (V. vitis-idaea), which is characterized as having a longer shelf-life than honeysuckle (Lonicera caerulea), and strawberry tree (Arbutus unedo), a higher content of triterpenoid acids in the cuticle was recorded. It has been suggested that triterpenoid acids might be related to lingonberry surface firmness and durability, probably due to the mechanical properties that they provide and the antimicrobial effect [64].
The main quality preservation strategies used to maintain the fruit quality at postharvest are based on temperature regulation such as cold storage and the application of ethylene regulators such as 1-methyl cyclopropane (1-MCP). Furthermore, controlled atmospheres are utilized with the same goal [70]. Nevertheless, during development and postharvest, fleshy fruits are susceptible to phytopathogen attack and the development of physiological disorders, such as cracking, russeting and chilling injury [70]. In Table 3, cuticle composition changes observed in response to postharvest storage conditions in fruits are shown. It has been reported that cuticle composition could have a relevant function regarding phytopathogens and the susceptibility to physical disorders. In the next section, the effect of postharvest treatments on cuticle composition and the relationship between cuticle composition, phytopathogen attack and physical disorders susceptibility are described. Decreasing of total cuticular wax, nonacosane (C 29 ) and heptacosane (C 27 ) amounts.

months (3 • C)
Decreasing of total wax and variety of wax compounds. Decreasing primary alcohols amounts. Increasing alkanes amount. [36]

Cold Storage
Different patterns of changes in response to cold storage have been shown among apple cultivars. The main constituents of the cuticular wax of apple "Maxi Gala" fruit after nine months of cold storage are alkanes and fatty acids, with nonacosane (C 29 ) and cis-13,16-docosadienoic acid (C 22:2 ) the main compounds of these two fractions, respectively [72]. The amounts of total cuticular wax and the main alkane constituents nonacosane (C 29 ) and heptacosane (C 27 ) decrease during seven months of postharvest storage at 0 • C in "Red Fuji" apple fruit [27]. During 140 days of cold storage, the total wax content of apple fruit cultivar "Starkrimson" increases from day 0 to day 80, then decreases at day 140 [28].
The total epicuticular wax content of sweet orange fruit increases after 30 days of postharvest cold storage (4 • C), then decreases at day 40, whereas at 25 • C, a continuous increase occurs during 40 days of storage. At 4 • C, the total cutin amount decreases continuously, whereas at 25 • C, an increase is observed at 20 and 40 days of storage. At 4 • C, triterpenoids increase continuously during 20 days and then decrease after 40 days of storage. At the same time, a continuous increase in triterpenoids and a decrease in fatty acid is observed during 40 days of storage at 25 • C. At 4 • C, alkane composition remains stable, whereas at 25 • C, the alkane fraction increases. Moreover, nonacosane (C 29 ) becomes the main alkane after 40 days of storage at 25 • C [23].
Changes in cuticle amounts and composition have been observed in response to postharvest at 20 • C and 0 • C for both "Somerset" and "Celeste" sweet cherry fruit cultivars, with a general increase in cuticle amount in response to cold storage [61]. Ursolic acid content has been positively associated with weight loss and softening of blueberry fruit at postharvest cold storage, whereas a negative association has been reported for oleanolic acid. During 45 days of postharvest storage at 0 • C, blueberry "Duke" was more prone to softening and dehydration than the "Brigitta" variety, which was highly correlated with the higher ursolic acid content in the triterpenoid wax fraction of "Duke" blueberry [38].
Cold storage at 4 • C for 30 days reduces the total wax content of both "Legacy" (V. corymbosum) and "Brightwell" (V. ashei) blueberry varieties, but differences in wax composition between both cultivars in response to cold storage have been reported. For the "Legacy" cultivar, diketones are the only VLC compound that decrease during the storage at 4 • C, whereas for "Brightwell", a decrease in the content of all aliphatic VLC compounds was observed [40].

Heat and UV Light
The quality of fruits is affected by excessive exposure to heat and UV light, mainly due to the oxidation of proteins and enzymes. One of the physiological functions of fruit cuticles is protecting against UV light exposure and extreme temperatures [5,6]. An increase in thickness, cinnamic acid derivatives and chalconaringenin compounds of cuticle appears to play a pivotal role in modulating UV radiation exposure in tomato fruit [73]. Furthermore, conformational changes leading to the glass transition of the cuticle membrane could serve as an adaptation mechanism in response to a change in environmental conditions [73].
It has been shown that the heat capacity of cuticle depends on the developmental stages of tomato fruit and that the thermal properties of fruit cuticle could be regulated by phenolic compounds [73]. Heat treatment increases the wax contents amount of "October Sun" peach fruits, whereas the effect of heat on cutin is less clear [74]. After a room temperature storage period, peach subjected to heat treatment and cold storage showed a reduction of cutin amount. Furthermore, it has been shown that heat treatment reduces the acyclic/cyclic compounds ratio of peach fruits [74], which strongly suggests a major role of wax cyclic compounds in response to heat.

Ethylene Regulators and Controlled Atmosphere
A controlled atmosphere (CA), dynamic controlled atmosphere (DCA) based on chlorophyll fluorescence (DCA-CF), DCA respiratory quotient (DCA-RQ) and 1-MCP application to apple fruits "Maxi Gala" do not affect the total cuticular wax content during cold storage conditions. Nevertheless, these treatments induce a change in the composition or concentration of specific wax constituents. DCA-CF leads to a higher concentration of nonacosane (C 29 ) and a reduction of mass loss, whereas 1-MCP reduces the concentration of nonacosan-10-ol and specific fatty acid constituents [72]. Storage of mature apple "Cripps Pink" under CA, DCA-CF and DCA-RQ treatments increases the wax concentration from day 7 to 14 of shelf life at 20 • C. Besides, all treatments led to a general increase of unsaturated fatty acids. Particularly, an increase in cis-11,14-eicosadienoic acid (C 20:2 ), nonacosane (C 29 ) and tetracosanal (C 24 ) was observed. A controlled atmosphere leads to an increase in ursolic and oleanolic acids, whereas DCA-RQ leads to an increase in 10-nonacosanol (C 29 ) [71].
In apple fruit cv. "Starkrimson", the combination of ethephon treatment and storage at 0 • C accelerates total wax and VLC aliphatic deposition, whereas 1-MCP causes the opposite effect. One of the most obvious effects of ethephon and 1-MCP treatments was the increasing and decreasing of octacosanoic acid content, respectively [28]. In "Red Fuji" apple fruit, the total cuticular wax, nonacosane and heptacosane amounts decrease during seven months of postharvest storage at 0 • C, but 1-MCP treatment slightly suppresses this reduction [27]. Like "Starkrimson" apple [28], in "Red Fuji" apple, nonacosan-10ol, nonacosan-10-one and hexadecanoic acid amounts increased after seven months of cold storage, but when fruits were treated with 1-MCP, their amounts were reduced [27]. Altogether, these findings support the relevant role of ethylene on the regulation of cuticular wax biosynthesis during the postharvest storage of fleshy fruits.

Physiological Disorders
The specific aliphatic composition of cutin influences the mechanical properties of apple fruit cuticles. It has been proposed that microcrack formation is due to low elastic cutin properties due to the low presence of phenolic compounds [57]. Sweet cherry varieties with a higher amount of nonacosane (C 29 ) are more tolerant to cracking than those with lower levels, suggesting that this wax component could protect sweet cherry from cracking [60]. There were no differences between alkane contents in both wild-type "Dangshansuli" pear fruit and its russet mutant "Xiusu" at early stages of development. Nevertheless, as the fruit grows, a higher content of alkanes is synthesized in "Dangshansuli" fruits. These differences in wax deposition and composition during pear development could contribute to russeting formation observed in the "Xiusu" fruit [35].
The cuticular waxes of jujube fruit (Ziziphus jujuba Mill.) cultivars "Popozao", "Banzao" and "Hupingzao" are mainly composed of fatty acids, primary alcohols and alkanes. No significant differences were observed in the mass of cuticle or cutin between the cracking-resistant cultivar "Popozao" and the cracking-susceptible cultivar "Hupingzao". Nevertheless, in the coloring stage of jujube development, "Popozao" shows a higher level of total wax than "Hupingzao". It has been suggested that the severity of microcracks during fruit development could be related to a lower level of cuticular wax. Furthermore, during the coloring period, "Popozao" cuticular wax contains fewer fatty acids but more alkanes and aldehydes with a chain length greater than 20 carbon atoms than cultivars "Banzao" and "Hupingzao". Based on the above-mentioned factors, it seems that alkanes and aldehydes with longer chain lengths could contribute to protecting against microcracking during the coloring period of jujube fruit enlargement [50].
No difference in thickness and total content of epicuticular wax is shown in oleocellosisdamaged lemon fruits, but a significant increase of alkanes (especially C 29 ) and a decrease of the amount of aldehydes (especially C 32 ) are shown, suggesting that oleocellosis can be related to the transformation of VLC aldehydes to VLC alkanes [26]. In Table 4, a summary of changes in cuticle composition reported in response to the appearance of skin disorders in fleshy fruits is shown.

Pathogen Infection
In Asian pear, a negative association between cuticular wax concentration and the development of Alternaria rot has been shown, with a difference in resistance to Alternaria rot between cultivars [36]. Cuticular waxes of mature goji berry fruit (L. barbarum L.) are mainly composed of fatty acids, alkanes and primary alcohols, accounting for 47.09%, 21.66% and 11.98% of the total content, respectively. Despite the lower amount of terpenoids present (1.29%), experimental evidence shows an association between their presence and Alternaria alternata infection resistance in goji berry fruit [51]. It has been proposed that triterpenoids of cuticular waxes have a potential role in maintaining fruit integrity and postharvest quality and extending shelf-life because they provide mechanical toughness and protection against pathogen infections in lingonberry fruit (V. vitis-idaea) [64]. In agreement, the cuticular wax fraction of pear fruits, mainly composed of triterpenoids, inhibits A. alternata germination and growth in vitro, indicating that these compounds might contribute to antifungal protection against fungal pathogens in pear fruit [34]. Table 4. Cuticle composition associated with physical skin disorders of fleshy fruits.

Fruit
Physical Phenotype Observation References

Glossy mutant "Glossy Newhall"
Low amounts of aldehydes, alkanes, and wax crystals during fruit development. Less amount of epicuticular wax at later stages of development. [21,56] Bilberry (V. myrtillus)

Bilberry "Glossy Mutant"
A high proportion of triterpenes, and a lower proportion of fatty acids and ketones. [54] Physical disorder Pear "Dangshansuli" (P. bretschneideri)

Crackingsusceptible "Hupingzao"
Low amount of total wax, alkanes, and aldehydes with a chain length greater than C 20 , and high amount of fatty acids. [50] Lemon "Yunning number 1" (C. limon) Oleocellosis High amount of alkanes (especially C 29 ) and a low amount of aldehydes (especially C 32 ) [26] It has been suggested that the increase in wax accumulation in the early stages of nectarine development could play a role in the resistance to fungus infection and water loss at harvest and during postharvest conditions, apparently due to the presence of triterpenoids. Oleanolic and ursolic acids appear to contribute to nectarines' fruit resistance to brown rot caused by Monilinia laxa in the middle stages of development, but this resistance is not observed at the maturity stage. Authors argue that the lack of resistance showed at the mature stage could be due to the presence of microcracks in the fruit epidermis, which affect cuticle integrity, and a higher level of alkanes in the cuticle, which could serve as a carbon source favoring the growth of fungus [32].
The analysis of epicuticular wax components of mandarin "Satsuma" fruit (C. unshiu) showed that they could promote mycelial growth of Penicillium digitatum, whereas cutin components could inhibit conidial germination at different storage periods [25]. Furthermore, the tomato mutant DFD exhibits resistance to microbial pathogens even when the cuticular wax has been removed, which suggests a possible role of the cutin structure in the resistance to microbial pathogens in tomato fruit [12]. The studies mentioned above show that triterpenoids and cutin components, rather than VLC aliphatics, appear to have a more relevant function during the fruit defense to pathogen infection.
The biochemical metabolism of fleshy fruit during development and postharvest has been widely studied. Although several studies showed the pivotal role of cuticle biosynthesis in fleshy fruit quality [9,10], studies using genes and proteins to enhance fruit quality through cuticle modification are still scarce. These studies have allowed the identification of genes and proteins that can be modified to extend fleshy fruits' shelf life [3,75]. Furthermore, this knowledge can contribute to generating technologies to improve fruit quality by increasing postharvest shelf-life, enhancing pathogen resistance, reducing physical disorders and reducing softening and water loss rates. Below, studies regarding the molecular pathway of cuticle biosynthesis in fleshy fruits and its relationship with softening, water loss and fruit quality are described.

The Molecular Pathway of Cuticle Biosynthesis
Cuticle composition is the phenotypic result of the activation of a specific biochemical pathway, which includes the participation of specific transcription factors, enzymes, transporters and RNA regulators in response to a stimulus [8,16]. Due to the considerable importance of cuticles in plant physiology, development and defense against biotic and abiotic stress, efforts to elucidate the molecular pathway of cuticle biosynthesis have been carried out, mainly in model plants such as Arabidopsis [13] and relevant crop plants such as wheat (Triticum astivum), rice (Oryza sativa), barley (Hordeum vulgare) and maize (Zea mays) [15].
In the case of fruits, most studies have been carried out in the model plant tomato (S. lycopersicum) [8,14,76]. Furthermore, by using massive RNA sequencing (RNAseq) and bioinformatic analysis, it has been possible to identify orthologous genes and proteins playing a role in cuticle biosynthesis in other fruits. However, some aspects of their regulation, the transport of their monomers across the cell wall and their macromolecular structure have not been clarified yet [5,16,77].
Both cutin and cuticular wax biosynthesis begin with C 16 and C 18 fatty acid (FA) precursors. Cutin biosynthesis involves the (i) synthesis of FA, (ii) FA oxidation, (iii) the export of the cutin monomers and (iv) their assembly [5]. Cuticular wax biosynthesis involves (i) FA elongation, (ii) functional groups modification (including primary alcohols and alkanes pathways) and iii) transport [11]. The mevalonic acid pathway synthesizes triterpenoid and sterol waxes [78]. In the next section of the review, genes and proteins involved in each of these processes are described, emphasizing discoveries carried out in fruits.

Cutin Biosynthesis
The precursors C 16 and C 18 FA are synthesized in plastids, where they are bonded to an acyl carrier protein (ACP) forming a fatty acyl-ACP complex. In plastids, the enzyme ketoacyl ACP-synthase (KASIII) can synthesize C 18 FA from C 16 FA through the condensation of a malonyl-coenzyme A (malonyl-CoA) molecule. Fatty acyl-ACP thioesterase A (FATA) and B (FATB) release C 16 and C 18 FA from ACP [79]. After, they are exported to the cytoplasm, where long-chain acyl-CoA synthetase (LACS) esterifies the FA to a coenzyme A (CoA) molecule [80,81]. Fatty acyl-CoA (C 16 and C 18 ) are then transported to the endoplasmic reticulum (ER) where FA oxidation occurs [5].
Protein members of the cytochrome 450 family such as CYP86A carry out the terminal (ω) oxidation of FA [82]. Then, CYP77A carries out the mid-chain oxidation [83]. It has been demonstrated that CYP77A19 and CYP77A20 from Solanum tuberosum oxidize fatty acids in vitro. Besides this, it was proved that CYP77A19 and CYP77A20 expression partially restored the wild phenotype in an Arabidopsis cutin mutant [83]. Altogether, these reactions can lead to the synthesis of saturated and unsaturated ω-hydroxy FA, ω-midchain-dihydroxy FA, ω-9,10-trihydroxy FA and 9,10-epoxy ω-hydroxy FA [84]. In addition, the oxidation of the ω-hydroxyl group could be carried out, leading to the synthesis of α-ω-dicarboxylic FA. It has been suggested that a CYP86B carries out this reaction, but this has not been confirmed yet [5]. In vitro analysis has demonstrated that SlCYP86A69 plays a role in the ω-hydroxylation of octadecenoic acid in tomato fruits [85]. The mutation of the gen SlCYP86A69 causes a deficient cutin and altered fruit surface structure [86].
Glycerol-3-phosphate acyltransferase (GPAT) transfers the acyl group from acyl-CoA to a glycerol-3-phosphate molecule, leading to the synthesis of 2-monoacylglycerol (MAG) cutin monomers [87,88]. The heterologous expression in yeast of EgGPAT1 from Echium pitardii, homologous to AtGPAT4/AtGPAT8 from Arabidopsis, shows acyltransferase activity. Furthermore, the ectopic expression of EgGPAT1 leads to an increase in the synthesis of cutin monomers in leaves of tobacco [87]. Besides this, it has been reported that PpGPAT2 and PpGPAT4 from Physcomitrella patens play a role in cuticle biosynthesis. A mutation in the gen Slgpat6-a abolishes the enzymatic activity of GPAT6 and leads to the alteration of the cuticle thickness, composition and properties of tomato, which suggests that this protein plays a central function in fruit cutin biosynthesis [89].
It has been hypothesized that MAGs are exported from the endoplasmic reticulum (ER) across the plasma membrane and cell wall through the activity of ATP Binding Cassette subfamily G (ABCG/WBC) and Glycosylphosphatidylinositol-Anchored Lipid Transfer Protein (LTPG) transporters, respectively [11]. It has been demonstrated that the ATP Binding Cassette transporters (ABCG), AtABCG32 from Arabidopsis and SlABCG42 from tomato can export 10,16-dihydroxy hexadecanoyl-2-glycerol, and the free fatty acids can export omega-hydroxy hexadecanoic acid and hexadecanedioic acid in vivo [90]. LTPG1 is required for the export of lipids in Arabidopsis, and it has been reported that LTPG2 is targeted to the plasma membrane, suggesting that it has an overlapping role with LTPG1 in cuticular wax deposition [91,92]. Nevertheless, the mechanism through which cutin monomers move across the cell wall is still unclear [77].
Once in the surface of epidermal cells, proteins belonging to the GDSL-motif lipase/esterase (GDSL) superfamily and cutin synthases (CUS) incorporate MAG into the cuticle matrix through esterification [5]. In tomato fruit, it was demonstrated that GDSL1 plays a role in the extracellular accumulation of cutin polyester. By immunolabeling experiments, it was shown that GDSL1 is trapped in the cuticle of tomato fruit. Further, the silencing of GDSL1 leads to a reduction in ester bond cross-links in cutin [93]. Cutin monomers are esterified to form self-assembled particles named cutinsomes. CUS1 is an acyltransferase associated with the outer epidermal wall, which bonds cutin monomers contributing to cutin deposition in tomato fruit surface [94,95].
It has been hypothesized that cutin monomers are linked to the hydroxyl groups of the cell wall components by covalent ester and/or ether bonds [5]. However, the sites of deposition of the cutin polyesters on the outer faces of the cell wall are still unknown [77]. In Figure 1, the chemical structure of the main cutin components found in fleshy fruit cuticles and the main enzymes that could carry out the synthesis of these components are shown.   Only the gene subfamily's main name is included for reactions involving multiple paralogs. 9-hydroxy fatty acid structures are used to represent both 9 and 10 hydroxy fatty acid monomers. The main C16 and C18 monomers are used to exemplify the structure of 2-monoacylglycerol monomers. Abbreviations: Cytochrome P450 subfamily 86A, 86B and 77A (CYP86A, CYP86B and CYP77A, respectively); StearoyI-ACP desaturase (SAD); Glycerol-3-phosphate acyltransferase (GPAT). The figure was built based on the literature [5,8,16,[82][83][84][85][86][87][88][89]. Chemical structures were drawn with the JSME Molecular Editor [96].

Fatty Acids Elongation
Cuticular wax biosynthesis is carried out in the ER and includes FA elongation, functional group modification and wax transport. Like cutin monomers, wax biosynthesis uses the precursors FA-CoA (C 16 and C 18 ) and malonyl-CoA, generated by LACS, and acetyl-CoA carboxylase (ACCase), respectively [11]. A process of elongation is carried out in the ER membrane by proteins belonging to the fatty acid elongase (FAE) multienzyme complex. Each elongation cycle involves four consecutive reactions that perform the addition of two-carbon atoms to the acyl chain [11]. These reactions consist of (i) the condensation of malonyl-CoA to the FA-CoA molecule by the enzymes beta-ketoacyl-CoA synthases (KCS) [97], (ii) reduction of the beta-ketoacyl-CoA by beta-ketoacyl-CoA reductase (KCR), synthesis of enoyl-CoA by beta-hydroxyacyl-CoA dehydratase (HCD) and reduction of enoyl-CoA by enoyl-CoA reductase (ECR) [98]. Thereby, VLCFAs with 20 or more carbon atoms are synthesized from FA-CoA C 16 and C 18 monomers [99].
The Arabidopsis genome includes 21 genes predictively encoding KCS, from which ECERIFERUM6 (CER6/KCS6) carries out the most important role in wax biosynthesis [8]. Furthermore, it was demonstrated that CER6 (KCS6) is essential for the synthesis of VLCFA longer than C 28 in tomato and appears to be involved in the generation of branched VLCFA [100]. It was shown that MdKCS2 from apple is located at the ER and its gene has a higher expression in apple pericarp. Besides, it was proved through ectopic expression that MdKCS2 increases wax content in Arabidopsis [101].
Through the analysis of Citrinae species, including the cultivated citrus C. clementina and C. sinensis, 96 genes encoding KCS have been identified, from which CsKCS2 and CsKCS11 proteins are located in the ER, and their genes increase their expression in fruits at the ripening stage, suggesting that they are involved in the accumulation of fruit cuticular wax during the ripening of citrus [102]. Once the FAs have been elongated, both VLC alcohols and VLC aldehydes can be generated through the reduction of VLCFA by fatty acyl-CoA reductases (FAR) enzymes, through the primary alcohols and alkanes pathways, respectively [8].

Primary Alcohols Pathway
The acyl-reduction pathway, also known as the primary alcohols pathway, carries out the reduction of the carboxylic group from VLCFA to form primary alcohols [8]. In agreement with that previously reported for plants [11], wax composition analysis in fleshy fruits shows that this pathway predominantly synthesizes primary alcohols in even-numbers carbon atom wax compounds. This reaction is mainly catalyzed by the alcohol-forming fatty acyl-CoA reductase named CER4 [103]. The expression of CsCER4, homologous to AtCER4 from Arabidopsis, changes during cucumber fruit development. The different expression level of CsCER4 between glossy type and waxy type cucumber suggests its role in wax biosynthesis in this fruit [104].
In the primary alcohols pathway, primary alcohols are used to synthesize esters through esterification to FA by wax synthetases (WS) enzymes. Wax synthase/diacylglycerol acyltransferase 1 (WSD1) is a WS located at the ER that catalyzes the synthesis of wax esters using mainly C 16 acyl-CoA as precursors [105]. Further, it was suggested that CER17 can perform the desaturation of VLC acyl-CoA leading to the synthesis of unsaturated primary alcohols [106]. Thereby, the primary alcohols pathway leads to the generation of saturated and unsaturated VLC primary alcohols and wax esters [11].

Alkanes Pathway
The alkanes pathway uses as precursors the aldehydes generated by the reduction of the carboxylic group from VLCFA. In accordance with that previously reported for plants [11], wax composition analysis in fleshy fruits shows that this pathway predominantly synthesizes alkanes in odd-numbers carbon atom wax compounds. A decarbonylation of aldehydes is carried out to form alkanes by the enzymatic complex CER1-CER3/WAX2, leading to the elimination of one carbon atom in the carbon chain [107]. It has been proved that the gene CsWAX2 located at the ER from cucumber (Cucumis sativus L.), which is homologous to AtWAX2 from Arabidopsis, is highly expressed in the epidermis and is involved in wax biosynthesis and plant response to abiotic and biotic stress [108].
Cucumber fruits with a waxy phenotype have a higher expression of the gene CsCER1. The CsCER1 protein is located at the ER, and its gene is specifically expressed in the fruit epidermis. Drought, low temperature and abscisic acid induce the expression of CsCER1. Furthermore, abnormal expressions of CsCER1 induce alterations of cuticle permeance, drought resistance and VLC alkanes biosynthesis, suggesting that it can carry out a pivotal role in VLC alkanes synthesis, especially in response to abiotic stress [109]. In the alkanes pathway, the midchain oxidation of alkanes can be carried out by the cytochrome P450 enzyme (CYP96A15) mid-chain alkane hydroxylase (MAH1) to generate secondary alcohols and subsequently ketones [110]. Thereby, alkanes, aldehydes, secondary alcohols and ketones can be generated by this pathway [11].

Triterpenoid Wax Biosynthesis
The mevalonic acid pathway synthesizes triterpenoid and sterol waxes. The cyclization of 2,3-oxidosqualene leads to the synthesis of triterpenoids by the activity of oxidosqualene cyclase (OSC) enzymes [78]. Beta-amyrin synthase (BAS) activity leads to the synthesis of lupeol, alpha and beta-amyrin [111]-one of the most prevalent terpenoid compounds in fleshy fruit cuticles. In tomato fruits, triterpene synthase 1 (SlTTS1) and 2 (SlTT2) catalyze the synthesis of alpha and beta-amyrins [112]. Then, a carboxylic functional group is introduced to beta and alpha-amyrin by proteins of the cytochrome 450 family CYP716A, leading to the synthesis of oleanolic and ursolic acid, respectively [78,111]. Regarding cuticle biosynthesis, the introduction of carboxylic groups could pave the way for further polymerization by enzymes such as acyltransferases. It has been shown that CYP716A46 and CYP716A44 from tomato can synthesize oleanolic and ursolic acid by the C-28 oxidation of beta and alpha-amyrins, respectively [111].

Transport of Cuticle Components
It has been hypothesized that waxes are transported from the ER to the plasma membrane (PM) through Golgi vesicles, then exported to the apoplast by the activity of ABCG and LTPG transporters [16]. Like cutin precursors, it has been suggested that the transporters from the ABCG subfamily AtABCG11/CER5, AtABCG12, AtABCG13 and AtABCG32 are required for wax export in Arabidopsis [8]. It has been suggested that cuticular components are secreted through vesicles derived from the trans-Golgi networks that fuse with the PM. Further, other hypotheses suggest that waxes can be transported directly from the ER through ER-PM contact sites [11].
More recently, a passive mechanism of cuticular component transport involving a phase-separation process have been proposed [77]. This hypothesis suggests that the highly hydrophobic waxes could cross the cell wall through association with an aggregate of amphiphilic cutin monomers [77]. Nevertheless, the mechanism of transport and the molecular organization between cutin, waxes and the cell wall components have not been elucidated yet. Omics sciences facilitate the identification of transcripts and proteins involved in relevant biochemical pathways in fruits. Recently, efforts to identify genes and proteins involved in cuticle biosynthesis and transport in fleshy fruits have been carried out.
In the next section of the review, a transcriptomic and proteomic analysis complemented with differential gene expression analysis such as qRT-PCR, contributing to the elucidation of the molecular pathway of cuticle biosynthesis, regulation, transport and its association with fruit quality, is described.

An Overview of the Current Status in the Elucidation of Molecular Mechanism of Cuticle Biosynthesis in Fleshy Fruits, Its Regulation, and Physiological Function
Through laser microdissection (LMD), transcriptomic analysis and differential expression gene protocols, it has been possible to identify genes that express in peel and epidermis, playing a role in cuticle biosynthesis and stress response in fruits [113]. An increase in the expression of SlCER6, GDSL, LTP and MD-2-related lipid recognition domain-containing (ML) protein (MD2) correlates with the stages of major cuticle deposition during tomato fruit development [114]. Furthermore, by pyrosequencing and LMD, epidermal-specific transcripts related to cuticle biosynthesis in tomato fruit epidermis were identified, including CYP450, AtCER10, LACS, KCS6, CER2, CER6, CER1 and LTP, and the transcriptional factors SHINE1/WAX INDUCER 1 (SHN1/WIN1), zinc finger (ZNF), cutin deficient 2 (CD2) and MYB [76].
Thirteen genes specific to the exocarp and correlating with the cuticle deposition pattern of sweet cherry fruits (P. avium) were identified, including PaLipase, PaLTPG1, the CYP450 aberrant induction of type three genes 1 (PaATT1), LACERATA (PaLCR), PaG-PAT4/8, PaLACS2, PaLACS1 and PaCER1 and the transcriptional factors PaWINA and PaWINB [115]. The major deposition of cuticle in sweet cherry fruits and the major expression of the genes PaLIPASE, PaFATB, PaLACS9, PaLTPG1, PaWBC11, PaWINA and PaWINB occurs at the earlier stages of development, strongly suggesting their participation in cuticle biosynthesis in cherry fruits. Nevertheless, the expression of PaCER5, PaLACS9, PaLTPG1 and PaWBC11 increases at later stages, despite the lack of a significant increase in cuticle deposition [116].
Through the transcriptomic analysis of mango peel during fruit development, transcripts orthologous to the transcriptional factors MiSHN1 and MiCD2, the enzymes MiCER1, MiCER2, MiCER3, MiKCS2, MiKCS6, MiCUS1 and MiCUS2 and the transporters MiWBC11, MiLTP1, MiLTP2, MiLTP3 and MiLTPG1 related to cuticle biosynthesis were identified. The higher expression of transcripts related to cuticle biosynthesis was shown at 153 DAF in ripening stages, and it was shown to correlate with the major cuticle deposition through mango development [117].
Through metabolomic and transcriptomic analysis, 27 genes related to cuticular wax biosynthesis and regulation from "Yuluxiang" pear fruit were identified, including Pbr-LACS1, PbrMAH1, PbrLTP3, PbrDGAT1, PbrWIN1, PbrKCS2, PbrKCS4, PbrKCS6, PbrKCS10, PbrECR, PbrCER9 and PbrKCR1. Furthermore, 12 genes coding for transcriptional factors and a new gene tentatively coding for a beta-amyrin synthase were identified. Deposition patterns during pear development positively correlate with the expression of these cuticlerelated genes. These findings allowed the identification of the cuticle biosynthesis pathway in pear fruit [118].
At the green expanding stage in mandarin epidermis (C. clementina), the most expressed genes are related to cuticle biosynthesis, flavonoid biosynthesis and defense response [119]. During "Newhall" navel orange development, the expression of genes involved in cutin and wax biosynthesis significantly increases in later development stages. Out of these, a transcription factor MYB (GL1-Like) appears to regulate the wax synthesis by controlling the expression of CER, KCS, and LACS genes [119]. The analysis of "Navelate" sweet orange fruits and its abscisic acid (ABA) biosynthesis-impaired mutant "Pinalate" suggest that ABA could regulate wax biosynthesis genes. The expression levels of the genes analyzed in this study were consistent with the amounts of VLC aliphatics and terpenoids, which enhance the cuticle metabolism pathway for sweet orange [22].
It was shown through the transcriptomic and metabolomic analysis of "Newhall" navel orange and its glossy mutant "Gannan No. 1 that the down-regulation of the genes FATB, LACS1, LACS2, KCS, FAR2 and CER3 and the transcription factor coding gene MYB16 was associated with a decrease in VLC aliphatic [120]. RNAseq analyses of "Newhall" navel orange peel and its glossy mutant "Ganqi 3' suggest that the glossy phenotype could be due to the decrease in the expression of CsACC1, CsCAC3, CsKASI, four CsLACS, six CsKCS, three alkane-forming pathway genes (CsCER1-LIKE and CsCER3), five alcohol-forming pathway genes (CsCER4-LIKE and CsFAR2-LIKE) and fourteen ABCG transporters genes, including CsABCG11-LIKE, CsABCG15, and CsABCG32 [121].
Analysis by qRT-PCR showed that genes encoding cuticle biosynthesis enzymes and the transcriptional factors encoding genes CsMYB16, CsMYB94 and CsMYB96 have a low expression at 60 days after flowering (DAF), increase at 150 DAF and then decrease at 210 DAF in both "Newhall" navel orange and "Ganqi 3". In contrast, the expression of CsLACS9, CsKCS2-LIKE1, CsKCS2-LIKE2, CsFAR2-LIKE2 and CsCER7 increased continuously during development. Nevertheless, at 150 and 210 DAF, "Ganqi 3' exhibited a low expression of almost all cuticle-related genes analyzed [122]. Like "Ganqi 3', the navel orange glossy mutant "glossy Newhall" exhibits a decrease in the expression of genes related to wax biosynthesis and export. Besides, a loss of epicuticular wax crystals is shown in "glossy Newhall" [21]. Authors suggest that the glossy phenotype in "Ganqi 3' and "glossy Newhall" is due to a reduction in the VLC aliphatic compounds due to the decrease in the expression of wax-related genes observed [21,121].
Seventy-nine genes potentially related to wax biosynthesis were identified through transcriptomic analysis of blueberries. Differential expression analyses between waxy and non-waxy blueberries led to the identification of a FATB gene tentatively associated with the waxy coating phenotype [123]. Analysis of the glossy type of bilberry suggests that the contents of fatty acids and ketones in cuticle composition affect the amounts of crystals and the glaucous phenotype in this fruit. Furthermore, the specific expression of the genes CER26-like, FAR2, CER3-like, LTP, MIXTA and BAS suggest their role in wax biosynthesis and the glaucous phenotype's appearance in the bilberry skin [54].
Transcripts coding for the transcriptional factors MYB42, MYB52 and MYB93, the enzymes LACS1, CYP86A, GPAT6, KCS4, KCS2, KCS10, CER1, CER3, CER6 and FAR and the transporters ABC, WSD and WBC11, related to cuticle biosynthesis, have been identified in the epidermis of apple fruit cultivar "Cox Orange Pippin". A decrease in cuticular waxes, ursolic and oleanolic acid, along with low expression of LACS1/CER8, LCR, GPAT6, KCS2, 6 and 10 is shown on the russeted patches of the semi-russeted apple variety "Cox Orange Pippin" [124], suggesting a relationship between the expression of genes related to wax biosynthesis and the russeting development in fruits.
Consistent with the changes shown in cuticle composition, genes involved in the synthesis of C 16 and C 18 FA and CER1 are induced by oleocellosis in lemon fruit, suggesting that the increase in the deposition of fatty acids and the content of VLC alkanes in cuticles is associated with the appearance of oleocellosis [26].
"Kordia" sweet cherry cultivar, which shows a cracking resistance phenotype, has a higher expression of PaWINB, WS and PaKCS6 during the fruit setting stage than the cracking susceptible "Bing" cultivar. Authors suggest that the cuticle deposition function of these genes could be involved in the tolerance to cracking observed in the "Kordia" cultivar [125].
Cold storage at 0 • C decreases the expression of the genes PpCER1, PpLACS1 and PpLipase in "October Sun" peach fruit, but after five days of room temperature storage, the expression levels of PpLACS1 and PpLipase increase. In addition, CO 2 and heat treatment restored the expression of PpLACS1 of cold-stored fruits to similar levels to those of harvest conditions [74], suggesting a regulation of cuticle metabolism in response to CO 2 , heat and cold storage conditions. At postharvest, cold storage and 1-MCP treatment decreased the cuticular wax density, delayed wax crystal melting and senescence and reduced the expression of the genes MdCER6, MdCER4 and MdWSD1 in apple "Starkrimson" fruits, whereas ethephon induced the opposite effect. Authors suggest an effect of ethylene in cuticular wax composition and crystal morphology through the regulation of MdCER6 and the alcohol forming pathway in apple fruit during postharvest cold storage [126].
During tomato fruit development, the genes related to cuticle biosynthesis CUS1, GPAT4, CER6, triterpene synthase 2 (TTS2) and cutin deficient 3 (CD3) were expressed at higher levels during mature green than during red ripe stages. At standard conditions, AC tomato fruits have a lower expression of these genes than DFD; nevertheless, water stress treatment significantly increases their expression in AC, but not in DFD [9]. Water deficit increases the total wax and esters amount and the expression of the genes WSD1, CER1, CER2, CER3, CER4 and CER10 in grape berry fruits. Additionally, an increase in the wax compound with a chain length from C 40 to C 50 is shown. However, despite the change in cuticle composition observed, no significant difference in fruit transpiration was shown [44].
The expression of MIXTA, which codes for transcription factor type MYB, occurs predominantly in epidermal cells of tomato fruit. It has been shown that MIXTA silencing leads to a thinner cuticle, an increased susceptibility to pathogens and water loss, accompanied by a decrease in the expression of the genes CYP77A, CYP86A, LACS2, GPAT4, ABCG11, ABCG32, GDSL, KCS3 and SHN3, suggesting that MIXTA regulates wax biosynthesis and could modulate the integrity of tomato fruit during postharvest [127]. It was reported that the gene MdKCS2 shows a large expression in apple pericarp. Besides this, it was proved through ectopic expression that MdKCS2 improved drought resistance in Arabidopsis by changing epidermal permeability and increasing wax deposition. In agreement with these findings, it was shown that drought and salt stress induce the expression of MdKCS2 [101].
In pepper fruit, two linked quantitative trait loci (QTL) associated with reduced postharvest water loss traits have been identified. Transcriptomic analysis showed that a higher expression of the genes CER1, CER3, LTP, FAR and CYP96A/MAH1, along with a decrease in FA and an increase in the amount of iso-alkanes in the cuticle, could be related to post-harvest water loss in pepper. Besides, a relationship between post-harvest water loss, a delayed over-ripening on the plant and reduced fruit softening after storage is suggested [128]. Efforts to elucidate the molecular pathway of fleshy fruits and the regulation and molecular response during fruit developmental stages in response to environmental conditions and treatments on plant or during postharvest conditions will contribute to the design of biotechnological strategies to develop plants adapted to grow and produce fleshy fruits under conditions of limited water supply, without affecting fruit productivity and quality.

Concluding Remarks
The cuticle composition, amount and biosynthesis pattern during fruit development are clearly different among various fruits, suggesting a role of fruit adaptation to the different environments in which the different fruit species evolved. This composition has been correlated with the physiology of fruit phenotypes in different studies. The data generated by the analysis of genes playing a role in cuticle biosynthesis further support the involvement of cuticle-specific components with a given fruit phenotype. This also has allowed us to move towards the elucidation of the molecular mechanism of cuticle biosynthesis. The study of the genes involved in cuticle biosynthesis in different fruits seems to suggest that there is a universal molecular mechanism of fruit cuticle biosynthesis that is active in the different fruit species.
The physiology of fruit cuticles is broad and includes responses to pathogen attack, biotic and abiotic stress, fruit quality and a role in development of physiological disorders. With all these data available along with those that are currently being generated, in the future, it will be possible to design fruits with stronger resistance to pathogen attack, that are less prone to develop physiological disorders, that have a low rate of weight loss and softening and that have a longer shelf life. This in turn will boost the sales of fruits to international markets, which is an important economic activity for developing countries such as Mexico.