Revision of the Original Material of Plagiothecium denticulatum var. obtusifolium (Turn.) Moore and New Synonyms for This Taxon

Hypnum denticulatum var. obtusifolium was described by Turner in the early nineteenth century. This taxon, now known as Plagiothecium denticulatum var. obtusifolium, has not been studied in detail or received a detailed description. During the revision in the Natural History Museum (herbarium BM), a specimen described there as a type (BM000890810) was found, but a careful analysis showed that it is currently not a type specimen. On the other hand, the conducted research showed that the holotype of this taxon is the figure attached by Turner to the newly described taxon. However, because the holotype does not contain all taxonomically significant features, the specimen found was used to designate the epitype of this name (BM000890810). Therefore, this paper provides the first complete description of the qualitative and quantitative characteristics of this taxon, which is today known as P. denticulatum var. obtusifolium. Forty qualitative and quantitative characteristics analyzed made it possible to make redescription of the examined taxon. Moreover, analysis of two morphologically similar, currently distinct taxa, P. sandbergii and P. denticulatum var. auritum, revealed no differences between them. Therefore, these taxa were proposed as new synonyms of P. denticulatum var. obtusifolium. Additionally, for both taxa mentioned above, lectotypes were proposed for P. denticulatum var. auritum, specimen PC0132639, and for P. sandbergii, specimen PC0132604, both from the Muséum National d’Histoire Naturelle, Paris, France (Herbarium PC).


Introduction
The history of Plagiothecium denticulatum var. obtusifolium (Turner) Moore, initially named Hypnum denticulatum var. obtusifolium Turner, began in 1804, when the English botanist D. Turner examined material collected by D. Brown on the summit of Mount Bulbein, in the town of Donegal, located on the Inishowen Peninsula in Northern Ireland [1].
Turner [1] observed that the capsules of this specimen were more slender and curved than those of the typical Hypnum denticulatum Hedw. (=P. denticulatum (Hedw.) Schimp.) or H. denticulatum var. sylvaticum (Brid.) Turn. For this reason, the author decided to distinguish this taxon as a separate variety, as H. denticulatum var. obtusifolium (Figure 1), by publishing its description in Muscologiae Hibernicae Spicilegium [1]. Sixty-nine years later, H. denticulatum var. obtusifolium was incorporated into the genus Plagiothecium Schimp. by D. Moore. As a result, the name was changed to P. denticulatum var. obtusifolium (Turner) Moore [2], and this remains the accepted name today (Figure 2).  [1]. Fragments concerning the described taxon are marked in the frame. In the diagnosis of a new taxon, Turner [1] did not cite any specimen or collection as a type. He only referred to the figure "T. 12. f. 2.", which showed the differences between the current H. denticulatum and the newly described H. denticulatum var. obtusifolium (Figure 3).  In the diagnosis of a new taxon, Turner [1] did not cite any specimen or collection as a type. He only referred to the figure "T. 12. f. 2.", which showed the differences between the current H. denticulatum and the newly described H. denticulatum var. obtusifolium (Figure 3). In the diagnosis of a new taxon, Turner [1] did not cite any specimen or collection as a type. He only referred to the figure "T. 12. f. 2.", which showed the differences between the current H. denticulatum and the newly described H. denticulatum var. obtusifolium (Figure 3).
Plagiothecium denticulatum var. obtusifolium was not distinguished for more than 200 years. The name has been commonly applied to specimens of P. denticulatum that were characterized by acute to obtuse leaves and well-developed ligulate decurrencies [3]. In addition, over the two centuries since, many authors have described dozens of subspecies, varieties, and forms. This has resulted in the appearance of many synonyms that function at the level of varieties, which have sometimes even been raised to the rank of species [3][4][5][6][7][8][9][10][11][12].
On the other hand, Bridel [7] proposed to change the rank of H. denticulatum var. obtusifolium to a species and named it H. obtusifolium (Turn.) Brid. He argued his proposal with the following observations: "caule subsimplici, foliis arcte imbricato-distichis concavis obtusis mediotenus uninerviis, thecae oblongae nutantis operculo e convexo rostrato", indicating that the described plant is characterized by, e.g., simple stems; with tightly overlapping, concave, obtuse leaves and alternate foliage; an oblong capsule, with a waving rostrum; and a convex lid. The species combination proposed by Bridel [7] is now obviously recognized as a homotypic synonym of P. denticulatum var. obtusifolium (Turner) Moore [3].
At the turn of the nineteenth and twentieth centuries, Stirton [14,15] distinguished two new species-P. kinlayanum Strit. and P. annotinum Stirt. He described the features of the former as: "elliptical leaves, and the cells very broad" that may resemble P. denticulatum var. obtusifolium but also many taxa of this genus. Elsewhere, Stirton [14,15] described P. annotinum as: "allied to H. denticulatum, but distinct in the curiously interrupted manner of growth of the branches; in the margins of the leaf reflexed almost to the apex". In subsequent years Dixon [16] made P. kinlayanum and P. annotinum synonyms of P. denticulatum var. obtusifolium [3,12,16].
In the mid-20th century, Koppe [21] used the name P. denticulatum f. laticuspis Koppe for P. sylvaticum sensu Mönkemeyer [22], which is now recognized as P. denticulatum var. obtusifolium [23], suggesting that the first name mentioned is also a synonym of the P. denticulatum var. obtusifolium.
In 1965, Ireland examined the types of P. sandbergii (PC0132604, PC0132605), stored in the Parisian herbarium, but, in a revision published four years later [24], he synonymized this and several other taxa with P. denticulatum, mentioning that these are only "environmental forms" of this species. However, in another article [25], he pointed out that this taxon requires detailed research. On the other hand, Wynns [3] indicated that this taxon is "evidently belonging to P. denticulatum var. obtusifolium s. str.", but formal synonymization has not been carried out so far.
The data provided above indicate that the described variety differs from P. denticulatum with shorter julaceous stems (3 cm long) and almost symmetric, firmly concave, narrowly obtuse leaves up to 2 mm long. On the contrary, P. denticulatum has larger, rather flattened, acute and asymmetric leaves. Plagiothecium denticulatum var. obtusifolium has fewer inflated alar cells, while P. denticulatum has more inflated alar cells and inclined capsules [25]. This variety also differs from the species with its short, julaceous branches and obtuse leaf apex [29,31]. Thus, it is easy to see that the specialist literature lacks detailed data on even the basic, taxonomically significant features of this variety and differences between this taxon and P. denticulatum. Taxonomic features reported by many authors [3,20,[25][26][27]29,32] indicate that P. denticulatum var. obtusifolium is currently quite variable.
Based on these observations and, above all, considering that the original material for this name has never been studied and described in detail, and, hence, no metric data on P. denticulatum var. obtusifolium currently exists, the aim of the present paper is to revise its original material and propose new synonyms for the analyzed taxon based on taxonomic revision of the original material of selected names in the genus Plagiothecium.

Hypnum denticulatum var. obtusifolium (=P. denticulatum var. obtusifolium) Case
Turner [1] in the protologue does not cite any specimen or collection on the basis of which he described the new taxon; he only cites Figure 2 from Table 12 "T. 12. f. 2", which illustrates selected features of H. denticulatum var. obtusifolium as well as those different from H. denticulatum (Figures 1 and 3). Taking into account the above facts and according to Art. 9.1 of the Shenzhen Code [33], "A holotype of a name of a species or infraspecific taxon is the one specimen or illustration ( . . . ) either (a) indicated by the author(s) as the nomenclatural type or (b) used by the author(s) when no type was indicated", it should be assumed that Figure 2 from Table 12, "T. 12. f. 2." (Figure 3), is the holotype of the H. denticulatum var. obtusifolium name.
On the other hand, the specimen found in the BM herbarium (BM000890810) is not only not quoted in the protologue but also does not contain any date or signature of any researcher associated with the analyzed name (Figures 3 and 4). Additionally, the description attached to the analyzed specimen, unfortunately, is only consistent with the diagnosis in a few respects, e.g., the same number "13.", which is analogous to the number of this taxon in Turner book [1] and the mountain "Bulbein" where the described taxon was found. Thus, at the present stage, the specimen of H. denticulatum var. obtusifolium (BM000890810) stored at the Natural History Museum, London, England, is not a type specimen of this name; only with a high probability can it be indicated that it is the original collection on the basis of which Turner described the new taxon [1]. P. denticulatum var. obtusifolium currently exists, the aim of the present paper is to revise its original material and propose new synonyms for the analyzed taxon based on taxonomic revision of the original material of selected names in the genus Plagiothecium.

Hypnum denticulatum var. obtusifolium (=P. denticulatum var. obtusifolium) Case
Turner [1] in the protologue does not cite any specimen or collection on the basis of which he described the new taxon; he only cites Figure 2 from Table 12 "T. 12. f. 2", which illustrates selected features of H. denticulatum var. obtusifolium as well as those different from H. denticulatum (Figures 1 and 3). Taking into account the above facts and according to Art. 9.1 of the Shenzhen Code [33], "A holotype of a name of a species or infraspecific taxon is the one specimen or illustration (…) either (a) indicated by the author(s) as the nomenclatural type or (b) used by the author(s) when no type was indicated", it should be assumed that Figure 2 from Table 12, "T. 12. f. 2." (Figure 3), is the holotype of the H. denticulatum var. obtusifolium name.
On the other hand, the specimen found in the BM herbarium (BM000890810) is not only not quoted in the protologue but also does not contain any date or signature of any researcher associated with the analyzed name (Figures 3 and 4). Additionally, the description attached to the analyzed specimen, unfortunately, is only consistent with the diagnosis in a few respects, e.g., the same number "13.", which is analogous to the number of this taxon in Turner book [1] and the mountain "Bulbein" where the described taxon was found. Thus, at the present stage, the specimen of H. denticulatum var. obtusifolium (BM000890810) stored at the Natural History Museum, London, England, is not a type specimen of this name; only with a high probability can it be indicated that it is the original collection on the basis of which Turner described the new taxon [1].  As mentioned above, the holotype of H. denticulatum var. obtusifolium ( Figure 3) is a figure that shows the habit of this plant: julaceous stem; imbricate leaves; leaf (only a very general shape); shape; arrangement of the capsule; and the lid. However, these drawings are very simple and schematic, and the entire figure, from a taxonomic point of view, is devoid of many important features, which would allow one to clearly distinguish this taxon from other closely related species. It is missing, e.g., a detailed drawing of the leaf, with smooth and obtuse apex; cells' dimensions; and the shape of decurrent cells.
However, due to the fact that the holotype does not include many taxonomically significant features, and taking into account Art. 9.9 of the Shenzhen Code "An epitype is a specimen or illustration selected to serve as an interpretative type when the holotype ( . . . ) is demonstrably ambiguous and cannot be critically identified for purposes of the precise application of the name to a taxon ( . . . )", a specimen recently found in the herbarium BM (BM000890810) should be designated as the epitype.
Hypnum denticulatum var. obtusifolium (=Plagiothecium denticulatum var. obtusifolium sensu stricto) is a small, soft plant with delicate metallic luster; stems are julaceous, 9- As mentioned above, the holotype of H. denticulatum var. obtusifolium ( Figure 3) is a figure that shows the habit of this plant: julaceous stem; imbricate leaves; leaf (only a very general shape); shape; arrangement of the capsule; and the lid. However, these drawings are very simple and schematic, and the entire figure, from a taxonomic point of view, is devoid of many important features, which would allow one to clearly distinguish this taxon from other closely related species. It is missing, e.g., a detailed drawing of the leaf, with smooth and obtuse apex; cells' dimensions; and the shape of decurrent cells.
However, due to the fact that the holotype does not include many taxonomically significant features, and taking into account Art. 9.9 of the Shenzhen Code "An epitype is a specimen or illustration selected to serve as an interpretative type when the holotype (…) is demonstrably ambiguous and cannot be critically identified for purposes of the precise application of the name to a taxon (…)", a specimen recently found in the herbarium BM (BM000890810) should be designated as the epitype.

Plagiothecium sandbergii Case
Ferdinand François Gabriel Renauld and Jules Cardot, in Contributions from the United States National Herbarium, published P. sandbergii [34]. The authors noted that the taxon is smaller than P. denticulatum, has broader leaves, demonstrates cell areolation, and differs in apex. Despite the modest description, these features do indeed refer to the described taxon ( Figure 6). In the protologue, the authors indicated that this material came from "Hope, Kootenai County" and is described as specimens "(No. 1174)".
Ferdinand François Gabriel Renauld and Jules Cardot, in Contributions from the United States National Herbarium, published P. sandbergii [34]. The authors noted that the taxon is smaller than P. denticulatum, has broader leaves, demonstrates cell areolation, and differs in apex. Despite the modest description, these features do indeed refer to the described taxon ( Figure 6). In the protologue, the authors indicated that this material came from "Hope, Kootenai County" and is described as specimens "(No. 1174)".
Among the seven currently known "types" of P. sandbergii only four (PC0132604, US70396, NY507114, and FH220148) are signed as a sample "No. 1174", and they are the only ones that can be considered syntypes of this species with certainty (Figures 7-9). Considering the above, the fact that the specimen from the Muséum National d'Histoire Naturelle Paris, France (Herbarium PC) is characterized by a fairly large turf, and given Article 9.3 of the Shenzhen Code [33], quoted above, specimen PC0132604 from Herbarium PC should be designated as the lectotype of Plagiothecium sandbergii Renauld & Cardot (Figures 7 and 8).  Among the seven currently known "types" of P. sandbergii only four (PC0132604, US70396, NY507114, and FH220148) are signed as a sample "No. 1174", and they are the only ones that can be considered syntypes of this species with certainty (Figures 7-9). Considering the above, the fact that the specimen from the Muséum National d'Histoire Naturelle Paris, France (Herbarium PC) is characterized by a fairly large turf, and given Article 9.3 of the Shenzhen Code [33], quoted above, specimen PC0132604 from Herbarium PC should be designated as the lectotype of Plagiothecium sandbergii Renauld & Cardot (Figures 7 and 8).
Plagiothecium sandbergii is a small, light green plant with characteristic metallic luster; stem is creeping, julaceous, rounded in cross section, with diameter 230 µm (SD); leaves are imbricate, concave and gently asymmetrical, not folded, ovate to elliptical; those from the middle of the stem are 1.

Plagiothecium denticulatum var. auritum Case
Friedrich Kern [35] published P. denticulatum var. auritum in the Jahresbericht der Schlesischen Gesellschaft für Vaterländische Cultur. In the diagnosis, he indicates only selected features of the described species, indicating that it is distinguished from P. denticulatum

Plagiothecium denticulatum var. auritum Case
Friedrich Kern [35] published P. denticulatum var. auritum in the Jahresbericht der Schlesischen Gesellschaft für Vaterländische Cultur. In the diagnosis, he indicates only selected features of the described species, indicating that it is distinguished from P. denticulatum by strongly folded leaves and well-developed decurrences, with hyaline and spherical cells. The author added that it is observed in the hollows of rocks. Kern [35] did not provide any collection or material that was used to describe the new variety or any drawing of the new taxon ( Figure 11).   A specimen of P. denticulatum var. auritum (PC0132639) was found at the Muséum National d'Histoire Naturelle in Paris; this is the only material currently known that could be used as a base for the description by Kern [35]. Considering the above and according to Article 9.3 of the Shenzhen Code [33], cited above, specimen PC0132639 from the Herbarium PC should be designated as the lectotype of Plagiothecium denticulatum var. auritum Kern (Figures 12 and 13).
Plagiothecium denticulatum var. auritum is a small, light green plant with metallic luster; stem creeping, 2.0-2.5 cm, rounded in cross-section; leaves not folded, concave, ovate and asymmetrical, those from the middle of the stem 1.    All tested specimens did not differ considerably with regard to any of the most im-   All tested specimens did not differ considerably with regard to any of the most important taxonomic features (Figures 15-17). Therefore, two examined taxa (P. denticulatum var. auritum, P. sandbergii) did not differ from H. denticulatum var. obtusifolium (=P. denticulatum var. obtusifolium), as indicated not only by the above descriptions, but also by the analysis of the ranges of variability of individual features (Figures 15-17). Therefore, based on these results and all the facts cited above, we propose that currently separate taxa, P. sandbergii and P. denticulatum var. auritum, should be considered new synonyms of P. denticulatum var. obtusifolium.

Description of Plagiothecium denticulatum var. obtusifolium sensu lato
All examind specimens were characterized by their light green color, fine metallic luster, and relatively small size; stem length (SL) 0.9-2.

Description of Plagiothecium denticulatum var. obtusifolium sensu lato
All examind specimens were characterized by their light green color, fine metallic luster, and relatively small size; stem length (SL) 0.9-2.5 cm, in cross section rounded with a mean diameter (SD) of 230-410 μm; height and width of epidermal cells (HE, WE) is 8-15 μm × 17-24 μm; height and width of peridermal cells (HP, WP) is 18.5-64 μm × 20-50 μm; leaves are julaceous, very concave, ovate-elliptical, gently asymmetrical, and not folded; the length of leaves (LL) is from 1.0 to 2.2 mm, and width (LW) 0.5-1.2 mm; the apex is obtusely apiculate; costae two, extending usually up to one-half of the leaf length,

Discussion
In the second half of the 20th century, some bryologists abandoned attempts to distinguish all of the varieties or forms described above related to P. denticulatum var. obtusifolium. Many of them have mentioned the variant in the context of an ecotype, with a slightly different appearance from P. denticulatum sensu lato, caused by habitat conditions. One of the first to propound this theory was Ireland [24,25]. He pointed out that the julaceous forms called P. denticulatum var. obtusifolium by Greene [28] and others are just environmental forms of P. denticulatum restricted to mountaintops and cliffs. Furthermore, Ireland [24,25] claims that any P. denticulatum plant is capable of producing julaceous stems under proper environmental conditions; this was later supported by Anderson et al. [36], Düll [37], Ignatov and Afonina [38], and Deng-ke and Ireland [39]. As a result, all the abovementioned authors considered P. denticulatum var. obtusifolium as a synonym of P. denticulatum. However, current genetic studies [3] confirm the validity of distinguishing this name as a separate taxon, and there are no lower-rank taxa within it [12,26].
So far, H. denticulatum var. obtusifolium, now known as P. denticulatum var. obtusifolium, has not been studied in detail or received a detailed description. A review of the literature confirms that this taxon is very superficially described, and many of its taxonomic features are not recorded [20,25,[27][28][29][30].
The specimen found in the herbarium BM, described there as "type", was used to designate the epitype of this name. The analysis of the studied material made it possible to describe many new features that have not been described in the literature so far [20,25,[27][28][29][30], including stem diameter (SD); epidermal cell height and width (HE, WE); peridermal cell height and width (HP, WP); costa length (CL); dimensions of leaf tip and base cells (LC1, WC1, LC3, WC3); length of decurrencies (DL); alar cell length and width (ACL, ACW); seta length (SPL); and dimensions of capsules (CPL, CPW) and operculum (OL).
Studies of H. denticulatum var. obtusifolium specimen also revealed significant differences between the analyzed features and what has been published in the literature to date. Smith [26] reports that the leaves of this taxon are strongly complanate or imbricate, and, while they are indeed imbricate, neither the examined material nor the accompanying figure [1] (Figure 3) indicates that they are strongly or even delicately complanate. Furthermore, it should be noted that the julaceous, imbricate leaves of the taxon are one of its most important and taxonomically significant features, distinguishing it from other closely related species [1,12].
Analysis of leaf dimensions of the H. denticulatum var. obtusifolium reveals a greater variation (1.48-2.2 × 0.82-1.2 mm) than indicated in the literature [20,25,28,29]. Our present findings indicate that the length of the leaves is within the lower limit reported by Greene [28] and exceeds the upper limit reported by Ireland [25], while their width is within the lower limit reported by Greene [28] and exceeds the upper limit reported by Iwatsuki [20].
Similar observations concern the range of variation in the length and width of the cells of the central part of the leaf. Only Jedlička [30] provides relevant data, reporting that they reach 90 µm in length and 18 µm in width. However, our present findings indicate greater variation among the cells of H. denticulatum var. obtusifolium, both in terms of length (64-139 µm) and width (7-18 µm). The relative lack of data from the literature is surprising, as the cells in the middle part of the leaf are among the most important taxonomic features of the genus Plagiothecium, allowing individual species to be distinguished from each other based on a given section [12,20,27,40,41].
Another interesting incongruency between our present data and previous findings is highlighted when reviewing Ireland [25], who notes that decurrencies are composed of fewer inflated, quadrate, or spherical cells, while the material of H. denticulatum var. obtusifolium is characterized neither by quadrate cells nor by their small number. In this taxon, as Iwatsuki [20] writes, "decurrencies do not differ from those in P. denticulatum" and are composed of many inflated and spherical cells. Currently, many authors [3,12,23,40] indicate that, while the shape of decurrent cells accurately differentiates the taxa of the described genus into sections, this is not related to interspecific and intraspecific differentiation. Ongoing research supports this assertion.
Ireland [25] indicates that the capsules of this taxon are "straight and erect". This is particularly interesting as it contradicts ongoing research. A detailed analysis of the H. denticulatum var. obtusifolium specimen (BM 000890810), the description (Figure 1), and the holotype of this name (Figure 3) indicate that the material examined is unambiguously characterized by an inclined or at least oblique, but never a "straight and erect", capsule; this is also the case for the entire P. denticulatum complex.
As reported by Greene [28], Plagiothecium species are usually collected sterile and sporophytes are not often recorded. Furthermore, as Wolski [42,43] points out, the most important taxonomic features of this genus concern the qualitative and quantitative features of the gametophyte. Hence, few data are available on the sporophytes of the described variety. As such, there may be some discrepancies in capsule orientation, as in the aforementioned paper by Ireland [25]. It is also known that, like many other mosses, Plagiothecium species form heterogeneous turfs, sometimes with several similar species in one sample. Distinguishing these species may be a challenge, especially when the taxa are closely related and quite similar, as in the case of P. laetum Schimp. and P. curvifolium Schlieph. ex Limpr., which often grow side by side and occupy a similar habitat [12].
In the second half of the 20th century, in North America and Asia [20,24,25], P. laetum and P. curvifolium were considered synonyms rather than separate species. Despite this, they differ in many features, one of which is the orientation of the capsule, which is upright in P. laetum but oblique in P. curvifolium. Current DNA analyses [3,40] clearly support the validity of distinguishing these taxa and treating them as separate species.
Hence, P. denticulatum var. obtusifolium appears to have a horizontal capsule, indicating that Ireland [25] may have analyzed mixed material or described another similar taxon, with a "straight and erect" capsule. This is supported by the fact that a species quite similar to the analyzed variety, characterized by distinctly julaceous, imbricate, concave, symmetrical leaves, and erect capsules, was recently described from North America (Aleutians, Alaska). This taxon, P. schofieldii G.J. Wolski & W.R. Buck [44] is recorded in nonforested areas of the Aleutian Islands and, due to its rather similar morphological appearance, could have been confused with P. denticulatum var. obtusifolium in the second half of the 20th century.
Although the data from the literature demonstrate a number of divergencies with our current findings, some convergencies were also observed. Our findings confirm that the anayzed specimen of H. denticulatum var. obtusifolium is a small plant, as described by Iwatsuki [20] and Ireland [25]; it is characterized by a delicate metallic luster [26] with dense and more or less julaceous foliage, as indicated by previous researchers [20,25,27]. This study also confirms observations made by scientists in Europe [26,27], North America [25], and Asia [20] that the leaves of this taxon are symmetrical or gently asymmetrical, distinctly strongly concave, mostly ovate, and imbricate [26]; and the apex is rounded or obtuse [20,[25][26][27].
Taken together, these features indicate some degree of similarity with some species from Southern and Northern Hemisphere taxa. Wynns [3] indicated that P. denticulatum var. obtusifolium is similar to a taxon recorded in the Southern Hemisphere-Plagiothecium lamprostachys (Hampe) A.Jaeger, based on its julaceous or braided stems and concave ovate leaves.
Interestingly, Wynns [3] notes that "in the Northern Hemisphere the name P. denticulatum var. obtusifolium has also been widely applied to non-julaceous plants with plicate leaves, wide cells and strongly and broadly recurved margins". The author also uses the name Plagiothecium denticulatum var. bullulae Grout for such plants from western North America and Greenland, while Eurasian plants are listed under "P. denticulatum var. obtusifolium in herb".
Even more intriguing, Smith [26] provides some significantly different findings, i.e., that P. denticulatum var. obtusifolium is also found in New Zealand, Tasmania, or even in the southern parts of South America. This is probably due to a mistake in the determination of the analyzed material, since several species may resemble the described variety. One such example is the abovementioned P. lamprostachys, which by its julaceous or braided stems and concave, ovate leaves could be mistaken for the described taxon. However, to be sure of this conclusion, of course, one first should revise the materials that this author analyzed.
Many authors indicate that P. denticulatum var. obtusifolium is associated with mountainous areas, at high latitudes in boreal localities [3,20,26,28,45]. However, recent analyses of the distribution of the genus Plagiothecium in Eurasia [12] report that it is more commonly found in Europe and certain Asian countries, including China, Russia, Nepal, Japan, and Iran, rather than in the boreal zone.
Wynns [3] mentions P. denticulatum var. auritum, stating only that "Kern's original materials should be compared with European collections listed under P. denticulatum var. obtusifolium". However, the author did not study any types for this taxon but analyzed some specimens from the original collection of P. sandbergii, mentioning only that these specimens are "belonging to P. denticulatum var. obtusifolium sensu stricto". The present study, enriched by analysis of the remaining specimens from the original P. sandbergii collection, confirms these observations. Additionally, they unambiguously indicate that both P. denticulatum var. auritum and P. sandbergii match the holotype and epitype of H. denticulatum var. obtusifolium in terms of both gametophyte and sporophyte characteristics. Thus, these taxa were proposed as new synonyms of P. denticulatum var. obtusifolium.

Herbarium Materials
In diagnosis, Turner [1] does not cite any specimen or collection as a type. However, during a revision at the Natural History Museum, London, UK (herbarium BM) a specimen of Hypnum denticulatum var. obtusifolium (BM000890810) was found, which is labeled in this herbarium as a "type". This specimen was received as a loan for a detailed study and analysis ( Figure 4). In 1867, this material was incorporated into Hooker's herbarium, and on the left is visible a part of the seal "Herbarium Hookerianum". Additionally, on the sheet of this specimen are many handwritten annotations, including the rewriting of "var. γ" to "var. β". However, the analysis of the description of this specimen and the diagnosis of H. denticulatum var. obtusifolium confirm that it is var. γ, and the right specimen for planned analyses.
In the case of the leaf length and width (LL, LW); length and width of cells from the top (LC1, WC1), the middle part (LC2, WC2), and from the lower part of the leaf (LC3, WC3); the length and width of alar cells (ACL, ACW); average costae length (CL;) and the decurrency length (DL) were included in the mathematical analysis. Therefore, to visualize the differences or similarities between the groups, box plot diagrams are presented. All analyses were performed using STATISTICA software (version 13.3.7).
All specimens of P. sandbergii included in the statistical analyses were collected by J.H. Sandberg. Therefore, since the material of this species was represented by two separate specimens (PC0132604, PC0132605) (Figures 7 and 8), any data obtained for them were summed and referenced jointly as representing a single taxon.