Electronics and Its Worldwide Research

: The contributions of researchers at a global level in the journal Electronics in the period 2012–2020 are analyzed. The objective of this work is to establish a global vision of the issues published in the Electronic magazine and their importance, advances and developments that have been particularly relevant for subsequent research. The magazine has 15 thematic sections and a general one, with the programming of 385 special issues for 2020–2021. Using the Scopus database and bibliometric techniques, 2310 documents are obtained and distributed in 14 thematic communities. The communities that contribute to the greatest number of works are Power Electronics (20.13%), Embedded Computer Systems (13.59%) and Internet of Things and Machine Learning Systems (8.11%). A study of the publications by authors, a ﬃ liations, countries as well as the H index was undertaken. The 7561 authors analyzed are distributed in 87 countries, with China being the country of the majority (2407 authors), followed by South Korea (763 authors). The H-index of most authors (75.89%) ranges from 0 to 9, where the authors with the highest H-Index are from the United States, Denmark, Italy and India. The main publication format is the article (92.16%) and the review (5.84%). The magazine publishes topics in continuous development that will be further investigated and published in the near future in ﬁelds as varied as the transport sector, energy systems, the development of new broadband semiconductors, new modulation and control techniques, and more.


Introduction
The Electronics magazine publishes topics of special interest that cover different areas, such as power electronics [1], the design of photovoltaic systems integrated by optimal control mechanisms [2], the development of new energy converters [3], the development of electric vehicles [4], as well as the study of new semiconductors that allow for devices with higher performance [5].Other widely developed lines of research are those related to optoelectronics [6], biomedical applications [7] and wireless communications [8].In these areas, numerous investigations have been established that seek to establish more efficient, safe and ecological communication systems allowing for the extension of the concept of the "Internet of Things" to a greater number of smart devices and applications.Devices such as GPUs, DPSs and microcontrollers, along with other powerful computing tools, have also been used in several of these publications.These devices are not studied in depth in this work as they are not part of the most important publications according to the relationships they present.However, they contribute in the achievement of the objectives set in the publications based on digital processing, embedded computing systems, new methods or automatic learning.The importance and variability of the published topics is amply reflected in this work, with the "Electronics" magazine representing a world reference for quality research, and future works that cover the existing challenges so far, or open new lines of research.
The Electronics magazine is embedded in the profile of Computers and Electrical Engineering in the Engineering, Electrical and Electronic category.This category covers resources dealing with applications of electricity, image and signal processing, electromagnetization, electronic components and materials, microwave technology, and microelectronics.Electronics belongs to the Computer Science subareas: Hardware and Architecture (position 35    Until 2001, there were no data on the number of articles published.In 2001 and 2003, 25,659 and 30,277 documents were published, respectively.From 2005 (30,366 articles, 4.47% of the registered total) to 2018 (70,247 articles, 10.34% of the registered total) 679,516 articles were published, producing a gradual increase of 10.15% with respect to the first value registered in 2001 (Figure 2).The number of citations has followed a similar relationship to the number of articles, the more documents published, the greater the number of citations.The annual percentage was somewhat lower until 2013 with 6.82% in citations (930,393 citations) and 6.77% in documents (46,030 documents), as of 2014 the increase in citations in percentage is greater than the increase in published documents reaching 14.14%, with 1,942,589 citations in 2018.If we relate the number of articles and number of citations obtained at the beginning, there is a 0.07 relationship that remains until 2007 and then falls to 0.05, in 2008 it follows an evolution in gradually decreasing until it reached 0.04 in 2018.This implies that each time the relationship between the percentage increases in documents, a similar proportion in citations contributions is not incorporated.Electronics is a journal that promotes publication in 15 thematic areas and a general one as shown: 1.
Microwave and Wireless Communications 5.
Computer Science and Engineering 6. Networks 7.
Systems and Control Engineering 8.
Circuit and Signal Processing 9.
Semiconductor Devices 10.Artificial Intelligence 11.Electrical and Autonomous Vehicles 12.Quantum Electronics 13. Organic Electronics 14. Artificial Intelligence Circuits and Systems (AICAS) 15.Industrial Electronics 16.General Each thematic area includes different topics.Based on the thematic areas, the journal managed 385 Special Issues between 2020 and 2021 and 2772 documents published until April 2020.In Figure 4, the distribution by percentage of the articles according to sections is represented.The three sections with the most publications are the most generic, such as Microwave and Wireless Communications with 550 documents (19.80%),Power Electronics with 466 published documents (16.80%) and Computer Science and Engineering with 459 documents (16.57%), and the rest of sections have contributions of less than 231 documents.In Figure 5, the distribution of special issues is represented according to section.The three sections with the highest special issues are the same with the highest published documents, but the position of the second changes with the third: Microwave and Wireless Communications with 550 special issues (16.36%),Computer Science and Engineering with 79 special issues (16.56%) and Power Electronics with 55 special issues (14.29%), the rest of the sections have contributions of less than 43 special issues.In Figure 6, the relationship between the documents published and the number of citations received on a logarithmic scale is observed to highlight the low values with respect to the maximums that, on a linear scale, would not be appreciated.Both documents and citations maintain different distributions, the number of citations has a potential relationship adjusting to the R 2 trend of 0.99, and the distribution of publications maintains an exponential relationship with the years, adjusting R 2 to 0.95.There is also a relationship in regards to citations/published documents: the greater the number of published documents, the greater the number of citations, and the relationship between the two is not uniform, as it increased to a maximum of 6.77 in 2017 and then decreased to 2.37 in 2019.The decrease coincides with the incorporation of the journal in the Journal Citation Reports.
The objective of this work is to establish a global vision of the issues published in the Electronic magazine and their importance, advances and developments that have been particularly relevant for subsequent research.

Materials and Methods
This work studies all the scientific publications published in the Electronics journal, which have been indexed in the Scopus database.Elsevier's Scopus is selected from the existing databases, since it is the scientific database with the greatest contributions to publications worldwide [9].To obtain automatic bibliographic data, an API interface is used in top of the crawler rasNetBot, developed by the research group of the Department of Electrical Engineering at the University of Almería (Spain) [10].The word used in the search is the ISSN of the Electronics magazine."ISSN (20799292)", obtaining a large number of documents and relationships, which are analyzed using community detection algorithms and are represented graphically, using Gephi open source software [11].

Community Establishment
Figure 7a shows the result of the search established by the string "ISSN (20799292)", obtaining a total of 2310 documents with a total of 1463 relationships, comprising publications established in the journal from 2012 to 2019.Each publication is represented by a node whose size is proportional to the cites received.A link between two nodes indicates that one of them cited the other and the distance between them represents the existing collaboration.A filtering process was applied to the total number of documents, which made it possible to eliminate those that were not cited by any other paper, due to the lack of collaboration ties between the authors.After this process, the documents that were located on the periphery were filtered from the Figure 7a,b were obtained.Figure 7b resembles a spatial distribution, where the largest community "Power Electronics" is easily distinguished.It also has the largest node (the most cited paper).Due to its general nature, it is strongly related to communities that are based on power devices, such as the "DC-DC converter" community.In almost all the communities, one sees several central nodes around which are several minor papers.An example of this is the "New Transistor" community located in the center of the central distribution (purple in the Figure 7b).The main nodes of the "New Methods" community are located on the periphery of the distribution, although it is strongly related to other central communities such as the "Visible Light Communications" community, the "Digital Processing" community or the "Transmission Lines" community, among which it is very difficult to distinguish it.This difficult distinction may be because in the New Methods community (light green in Figure 7b) new methods and techniques are being established and they represent considerable advances in constantly changing issues such as those related to communications and information processing.
In Figure 8, the percentage of documents that make up the 14 communities is represented.Figure 9 shows a representation of the 100 global most-used words by all communities.Two communities stand out because of their size compared to the rest: "Power Electronic" and "Embedded Computer Systems".The rest have a percentage that is within the range of 1% to 9%.The smallest communities are "Cloud Computing" with 2.11% and "DC-DC Converter" with 1.69% of the total of the studied publications.Figure 10 represents the number of repetitions of the 10 most common keywords in the documents studied.The same trend that appears in Figure 9 is observed.The most repeated keyword is "Internet of Things", a general word that appears in the community to which it receives its name from, and in almost all the others, since it is a concept of great importance and applicable to different areas.Another word that appears frequently in the publications studied is "Field Programmable Gate Array" or its acronym, FPGA, and it is the most repeated keyword in the community "Digital Processing" and appears in other communities due to its widespread use in both control applications and data processing.The following words have lower repetition values compared to the previous ones.They turn out to be the main keywords of the communities to which they are named, as is the case of "DC-DC Converter" in the smallest community, as well as words that are predominant due to their use in different communities such as "Raspberry Pi" in the "Embedded Computer system" community, or "Deep Learning" and "Convolutional Neural Network" in the "Machine Learning Systems" community.

Community Analysis
Each community maintains a common theme, although it is closely interrelated with the rest of the communities.The main nodes of each community and their most significant contributions, according to their size, were analyzed in order to understand their research field in depth.
Power Electronics Community is formed by research that studies the latest applications developed in the field of Power Electronics, such as motor control, energy converters, or photovoltaic systems.The spatial distribution of this community is shown in Figure 11a, where the size of the nodes is related to the importance of the publication.It is the largest community with 20.13% of the total number of works and with a very compact distribution, with numerous relationships between the works that comprise it.In Figure 11b, the 10 most repeated keywords in this community are represented, the most repeated being "Maximum Power Point Tracking", followed by "DC-DC Converter" and "Field Programmable Gate Array", all these words constitute the main lines of research developed in power electronics.In this community, the main node stands out with a size considerably larger than the rest, with which it establishes relationships to a greater or lesser extent.This main node is [12], a special issue that addresses the latest advancements in power electronics.It includes areas such as fault diagnosis and reliability, a topic widely studied in order to extend the life of power systems.Work has been carried out on open-circuit fault diagnosis and fault tolerance control of three-phase active rectifiers, strategies for fault-tolerant control of induction motors of different phases [2] and reviews on the status of lithium ion batteries for electric vehicles [13].
Nowadays, more and more devices are equipped with power electronics systems for their activation.This is one of the reasons why an approach is being developed to improve the performance and stability of motor drive systems through control systems.Some of the work carried out in this field aims to improve performance of dual three-phase permanent magnet synchronous motors (PMSM), or use active vector modulation to improve the control scheme [14].Bypass power filter design methodologies have been developed, or cycle controllers.The performance of dual active converters for isolated power converters is also evaluated, as well as the use of digital control techniques for inverters that can be used in renewable energy applications.Power electronics are widely used in photovoltaic applications, for which a three-level step-up converter using FPGAs can be used, or photovoltaic inverter controllers can be developed, that improve the quality of the solar energy supply.An example of this is the design of a Bi-reflector solar photovoltaics system (BRPVS) for building integrated photovoltaics (BIPV).Effective power conditioning for BIPV is crucial, using a booster DC-DC converter that boosts the voltage and tracks the peak of the output power in real time [15].
Energy management involves the application of different power systems, from the modeling of electrical circuits to double-layer capacitors for energy storage, introducing enhancements to the State of charge (SoC) estimation using optimization and appropriate filtering methods in [16].The development of a hybrid energy source is also a topic of special interest in this community [17].This source is made up of a system consisting of a supercapacitor (SC) and a lithium ion battery bank.The system consists of a quick charging circuit with fuzzy logic controller (FLC) and fuzzy logic-based intelligent energy management system (FLIEMS).This device allows a user to decrease the loading time of systems such as the electric powered wheelchair (EPW), regulating the energy profile of the battery to be able to use it when a fast charge or discharge is needed.The FLC control system allows a user to reduce existing voltage differences, avoid overcharging and improve battery efficiency.The objective of this area is to achieve a safer operation of the batteries, with an efficient management of their charge and discharge.
One of the applications receiving increasing interest in recent times is the development of innovative control strategies for hybrid AC-DC and AC-DC microgrids.In this area, harmonic linearization techniques have been implemented to analyze the stability of an AC microgrid in the sequence domain, as well as mechanisms for microgrids based on renewable energy [18].
The dead time in the activation signal in power converters has also been a growing line of research in recent times.This is the main theme of the second most important publication of this community [19], where negative effects of presence in the system are studied, such as current distortion, or voltage reduction at the fundamental output frequency.To mitigate these effects, different control strategies have been developed with state-of-the-art dead time compensation algorithms.This compensation affects the output performance, stability, and reliability of the control system, so further investigation is required [20].
Embedded Computer System Community includes publications with a theme related to Embedded Computing Systems (ECS), its general considerations, applications, as well as the open source systems that can be used.The treated subject covers diverse disciplines, which is the reason why the spatial distribution of this community is wide, as observed in Figure 12a.It is the second largest community, in relation to the rest of the communities, made up of 13.59% of the total papers.In Figure 12b, the 10 most repeated keywords in this community are represented, the most frequent word being Internet of Things (IoT), being the main application of ECS.The next most popular word is Raspberry Pi, the main ECS system used in most research.The rest of the words reflect the variability of the applications developed with these systems.In the spatial distribution of this community, three publications can be seen with a node of a size considerably larger than the rest.One of these reference nodes is [21], a publication presenting the capabilities of one of the most researched ECS in recent years, the Raspberry Pi.This device is known as a single-board computer (SBC), it runs a full operating system, and it has enough peripherals to start running without additional hardware.The Raspberry Pi can support multiple operating systems and can connect to various electronic components.All these features along with low-cost hardware and easy availability have fueled its increasing development and popularity.The predominant use of the Raspberry Pi is in the educational field, so it is included in numerous schools [22], universities and research facilities [23].Other reference node is [24], it exposes different applications of these systems in the field of biomedicine.Innovative sensors, detection platforms and adequate data mining have been developed in this area, focusing on the integration and conditioning of physiological signals [25].There are many different investigations, such as those focused on monitoring cardiac signals using a portable system of a sensor shirt capable of acquiring the multichannel electrocardiogram (ECG) [26], a wireless sensor system for the long-term monitoring of cardiac arrhythmias [27], or a portable system for monitoring heart rate variability (HRV) in humans and animals [28].A portable system has also been developed to monitor electrodermal activity (EDA) signals during emotional stimulation [29].A non-intrusive method of tracking hydration rates in the body that can aid in the diagnosis of fluid disorders such as lymphedema has also been developed [30], as well as algorithms for portable surgical navigation [31].The domestic applications have also undergone a notable development, with the ECS proposing new structures for the Smart Home, which allow for the analysis of the behavior of various sensors through Wi-Fi connectivity, or other protocols [32].
The growth in open source software platforms at ECS has also contributed to the growth and development of these systems [33].There are studies that establish the impact of the presence of open source through the diversity of research developed with these systems [34].Some of these investigations include the development of a platform or the transmission of data in real time, and the analysis of livestock [35], the implementation of smart converters for real-time current and voltage of renewable energy systems, or a method of creating and detecting hardware Trojans using FPGA [36].The great variety of applications developed shows that there are no restrictions or limitations in the use of these products and that they constitute a constant research topic.
Internet of Things (IoT) Community constituted by publications aim to extend the use of everyday devices to the internet space, known as the Internet of Things (IoT).This community is the third in size and is made up of 8.11% of the total number of filtered works.In Figure 13a, its isolated spatial distribution is represented, in which two larger nodes are observed around which smaller publications are located, there being a great dispersion due to the great variety of applications developed in this community.In Figure 13b the 10 most repeated keywords are represented, among which the keyword that marks the theme of this community "Internet of Things" stands out, with 10 repetitions.The rest of the words have a very small frequency and mark the variety of subtopics covered, such as "Deep Learning" or "Vehicle to Everything".IoT allows multiple devices to communicate and share information, without human intervention, creating a global network and applying to different scenarios.One of the most researched fields in IoT is transportation, as indicated by the largest publication in this community [37].This paper presents different considerations related to vehicle networks and the promotion of the Internet of Vehicles (IoV) [38].The main research in this area has focused on traffic management, developing applications capable of managing and balancing traffic flows according to current and future congestion conditions, methodologies capable of allowing coordination of vehicle congestion according to protocols [39], match control, or by encoding road junction vectors and recursive bidirectional neural networks.Vehicle energy management is another issue to consider for efficient devices [40].With this objective, publications are developed that present a model of optimization of charging stations, maximizing the efficiency and stability of vehicles [41].Cybersecurity is very important in these systems due to the multiple threats to which vehicles are exposed, for which reason implicit authentication mechanisms have been evaluated through the added delay in communication and processing tasks [42].The integration of these systems within the new 5G architecture opens a wide field of research [43], which will allow for the establishment of greater capabilities in these systems.
The IoT in medical care present another relevant publications in this community [44].A line of research is the monitoring of physiological signals [45], among which the processing of electrocardiograms (ECG) stands out, developing finite response models (FIR) to correct discretely acquired ECGs and methods that allow for recording by Smartphone [46], for the discrimination of possible atrial fibrillations in patients.The subject's behavior, position and movement represent a relevant source of information, which allows for the development of joint models for medical study, or the sports activity of an athlete by monitoring their physiological parameters [47].In this line, systems have been implemented to help elderly people at risk of falling, by estimating human orientation in three dimensions by monitoring the signals from different sensors [48].Research has also been carried out on portable systems for the disabled, an example of which is a system that allows the characteristics of sounds to be estimated in real time and to create a fingerprint for people with hearing disabilities [49].The IoT is becoming very popular even outside of its original home automation scenario, with music related apps popping up [50], along with rural development and smart farming [51].
The relationship of the IoT with the development of smart cities is very close, highlighting the concept of the home area network (HAN) that allows for the connection of sensors and household appliances making up smart homes or residences.One of the biggest challenges in the development of these networks is the reduction of energy consumption, focusing the search for energy efficiency initially on the development of hardware [52].Nowadays, this search has also become a concern for software developers, and there is an intense area of research with this objective.An example is a hybrid method, developed to optimize the load scheduling problem [53].It is a hybrid model with a multi-objective optimization differential evolution (MODE) algorithm, that allows a user to obtain a set of optimal solutions, minimizing the cost and the peak load, with energy and cost savings of 47% and 46% respectively.Programmers are increasingly aware of the impact of energy consumption, so new energy efficiency techniques are applied, with which savings of up to 99.56% can be achieved.
The IoT is characterized by multi-object connectivity anytime, anywhere, so security threats increase and methods to increase device security must be explored [54].A method that restricts the extension of vulnerable devices to security risks by imposing sanctions has been developed.It only allows highly secure devices to be authenticated and extended securely and quickly without user intervention.
Machine Learning Systems Community is made up of investigations regarding automated machine learning.Topics related to advanced driver assistance systems, image or trajectory detection using convolutional neural networks and other machine learning methods are considered.In Figure 14a, the isolated distribution of this community is represented, where its dispersion is observed due to the variability of the topics covered.The representation of the 10 most repeated keywords in this community is observed in Figure 14b, and "Convolutional Neural Network" is the most repeated word, presenting itself as the most-used method to carry out the learning method.The rest of the keywords are related to this learning and the devices +used in the systems such as the "Faithful Programmable Gate Array" case.The two most important nodes in this community are similar in size and both are special issues released in 2019.The main one is [55], with the largest number of publications associated.This work considers Advanced Driver Assistance Systems (ADAS) and its development for autonomous vehicles.Advanced machine learning algorithms allow for the ADAS system to detect objects, obstacles, other vehicles, pedestrians, and lanes, and allow for the estimation of object trajectories and intentions.Aspects related to communications between ADAS are considered, which allow for the improvement of vehicle safety and alerting the autonomous system to potentially dangerous situations.Detection is a critical component in ADAS applications.Objects must be detected and tracked to avoid obstacles, collisions and plan possible routes [56].The 3D point cloud of a Light Detection and Ranging (LiDAR) sensor can be used to classify the manageable and unmanageable regions, establishing a method that allows for the detection of passive beacons and the implementation of models that prevent the vehicle from entering a restricted space [57].The LiDaR methodology can also be used to detect pedestrians with clouds of points, or for real-time models in densely vegetated environments.
Many modern machine learning algorithms require significant amounts of training data, making the availability of this data critical to their development and testing.There are studies where these data are used to train learning algorithms to detect objects in panoramic images or to speed up the process of detecting urban objects in real time.To address the challenges and problems that arise in aspects related to machine learning, some techniques that are based on the use of convolutional neural networks are proposed.There are publications that present the detection of land vehicles in infrared aerial images based on a convolutional, a novel approach so far [58].It has the unique ability to detect both stationary and moving vehicles in real urban environments.The importance of establishing systems with these networks leads to the development of methods to accelerate deep networks and establish greater precision.In addition, new hardware methods for the implementation of convolutional networks using FPGA are considered [59].
Among autonomous learning methods, approaches derived from computational intelligence processes, reinforcement learning, and the use of neural networks are increasingly important in flight systems.In the second most relevant work of this community [60], the main challenges and basic considerations of the Unmanned Aerial Vehicles (UAVs).These vehicles have both military and civil applications [61], these applications include from surveillance, reconnaissance, remote sensing, target acquisition, border patrol, infrastructure surveillance, aerial imaging, industrial inspection and medical aid to emergency [62].A vehicle is considered autonomous when it can make decisions and reacting to events without the direct intervention of human beings.It must have the ability to detect and perceive the environment, analyze the information detected, communicate, plan and make decisions, as well as act using control algorithms and actuators.In order for UAVs to be fully autonomous, aspects such as stability and waypoint flight, 3D trajectory planning with obstacle avoidance using efficient computational methods and visual control of maneuvers in the vicinity of the earth [63].Furthermore, they must be able to reject disturbances in a robust manner and establish efficient communication links.To refine these considerations, different techniques have recently been established, including single carrier frequency division multiplex modulation, which achieves great efficiency in the communication link between the unmanned aerial vehicle and the present control station on earth [64].
Wireless Communications Community is made up of publications whose subject matter includes issues related to wireless communications, from the evolution of wireless networks, the development of antennas for these communications and their main applications.In Figure 15a, the isolated distribution of this community is represented, observing that it has a concentrated distribution, despite dealing with quite varied topics.It is a community with an intermediate size, considering that it is made up of 7.38% of the publications.In Figure 15b, the 10 most repeated keywords in this community are represented, with 5G being the word with the highest number of repetitions as it is the latest technology developed for all communications.The next most repeated word is Massive Multiple-Input-Multiple-Output (MIMO), one of the most researched and used technologies in wireless communications.The rest of the keywords have a lower frequency of appearance, such as the Reconfigurable Antenna, one of the last proposed antennas for these communications.
Two nodes larger than the rest are observed in this community, representing two of the works that serve as a reference to the rest.One of these publications is [8], where a review of the most researched wireless communication technology in recent years is established, the MIMO technology.This technology promises true broadband wireless networks, employing hundreds of base station (BS) antennas to simultaneously serve dozens of active terminals (users), with the same time and frequency resources.Massive MIMO systems have higher selectivity in data transmission and reception, improving interference cancellation.Furthermore, increasing the number of BS antennas above the number of active users produces a higher performance and an improvement in the quality of the channel estimate.Due to the advantages and popularity of the massive MIMO system, the number of posts in this area has increased markedly in recent years [65].New algorithms, methods for estimating the direction of arrival with low complexity, as well as studies on the optimization of energy efficiency in systems of this type have been developed to increase the addition rate [66].The most important publication of this community is [67], as it establishes different aspects of ecological communications in smart buildings, considering massive MIMO technology.One of the main aspects to be dealt with for the development of this type of communications is the communication infrastructure, with 5G communication being the one that offers the greatest benefits due to the wide variety of frequency bands it has [68].The implementation of high-precision and energy-efficient location algorithms is of special interest for the development of these communications, which need to reduce general infrastructure requirements and computational complexity.
Within wireless communications, there is a widely developed research area, the study of new antennas.The most widely-used types of antennas in wireless communications are reconfigurable antennas [69].These are antennas whose properties can be adjusted to achieve a specific frequency band, direction and polarization.These tunable antennas offer several advantages, such as multifunctional capabilities, lower volume, low front processing efforts without the need for a filter element, good insulation and enough out-of-band rejection.For the configuration of the possible states, different techniques are usually used with active elements such as switches or capacitors.There are numerous publications where different antennas of this type are presented, such as [70], where a printed antenna of small size is exposed, and a frequency displacement occurs and the reconfiguration of its patterns, by means of three switches.Other publications propose reconfigurable antennas powered by coplanar waveguide, shaped like a cedar, or circularly polarized antennas with a semicircular groove [71].There are also other investigations where non-reconfigurable antennas are developed.These antennas are also of interest to wireless communications because of their large bandwidth, small size, good phase linearity, low cost, and radiation pattern [72].
Digital Processing (DP) Community consisting of publications that focus on digital data processing generally in real time.For this processing, a key device is usually used, such as Field-Programmable Gate Arrays (FPGAs).The number of works that comprise it constitute 7.27% of the total and its spatial distribution and is shown in Figure 16a.This figure shows a great spatial dispersion, due to the diversity of applications that can be related to this topic, although there is also a central area with a greater concentration of publications.In Figure 16b, the 10 most repeated keywords in this community are represented, the word Field-Programmable Gate Arrays (FPGA) being the most repeated, being the most used device to carry out digital processing, the next word is Fast Fourier Transform (FFT), a mathematical technique widely used in this process.The following words have very little repetition, as they are a small community, where words from the digital processing theme such as Embedded System or Real Time occur.In the spatial distribution of this community, there are three nodes, or publications, with a size greater than the rest, around which connections are established with the rest of the works.One of these posts is slightly larger [73], considered the most important work of the community.This is a special issue where solutions related to the efficient digital processing of signals in real time using FPGAs are presented.These devices have performance, consumption and cost characteristics that allow their use in the development of sensors, in control systems, or robotics, its key application being signal processing.In addition, the detection, processing, communication and action on human activities in real time has involved a wide area of research, focused on these devices.Numerous applications have been developed for health monitoring, such as generalized microcontroller environments for detecting ventricular fibrillation in real time [74] and systems where alerts can be sent without the need for external processing.An application with this theme, where there has been a breakthrough, is [75], another of the three reference publications in this community.This work presents an adaptive demodulator for high dynamics efficiently integrated with FPGA, which allows for the establishment of the velocity profile of a fluid.The detection of this profile is carried out using a Pulse-Wave Doppler (PWD) ultrasound system, which detects pulses of energy that are periodically transmitted through the medium due to changes in the Doppler frequencies of moving particles.This system allows the rheological characterization of fluids such as blood, or industrial fluids [76].
One of the most developed lines of research currently focused on image processing using FPGAs [77].There are some works where novel topics in this area are exposed, such as the implementation of a real-time motion detection system for automated video surveillance [78], or systems for the recognition of traffic signs by color segmentation and the Functions Invariance Feature (SIFT) [79], Speeded-up Robust Feature (SURF) and Histogram of Oriented Gradients (HOG).Advanced motion control applications require high sampling rates to achieve good control system performance with high precision.A possible solution to this requirement is proposed with an improved speed estimation algorithm, which consumes the minimum FPGA resources [80].This fact is in accordance with the new existing trends in the development of these types of devices, aimed at establishing smaller designs and with lower energy consumption [81].
New Methods Community is formed by research that considers the most recent developments in topics of interest in industrial applications.Publications based on visual service, temporary challenge or image processing are considered.In this community, very diverse topics are discussed, which are not strongly related to each other, so the dispersion in the spatial distribution of the community is notable.Figure 17a.The representation of the 10 most repeated keywords is shown in Figure 17b, where the most frequent word is "Internet of Things", considering that most of the methods developed aim to increase the amplitude of IoT devices.Other trends are focused on "time delay" or "visual servoing", as indicated by the frequency of the keywords present.In recent decades, research in networked control systems has been very relevant, considering the determination and study of the influence of delays as of special interest, since they can degrade the performance of the system.Reference [82] is the article represented by the largest node in the community, and it shows the latest developments in delayed systems and their applications.Research has been conducted that addresses the impact of delays on network-based systems for the droop-controlled AC microgrid; systems that allow the detection of failures triggered by cyber-physical events with non-linear sensors [83], as well as methods to analyze the stability of sampled-data systems [84].Attempts have been made to determine the criteria for the finite time stabilization of systems with delay, in its application for image encryption using delayed non-linear modulation, or in energy storage circuits.
Another field of research with new advances is visual serving, also called visual service, and some of these advances are exposed in [85], another one of the most important publications in the community.In this discipline, image processing, robotics and control theory are combined to control the movement of robots using images captured by one or more cameras.Issues such as the development of an improved image-based visual servo system for a 6-degree-of-freedom industrial robot are currently being investigated, along with algorithms for image reconstruction using Kalman filters, or mobile manipulators [86].The use of new control schemes allows for the system to behave in a more robust, efficient and less time-consuming manner, and monitoring control is also of interest for robotic cloud systems with delayed measurements [87].The fields of application of visual servo systems are very wide and include navigation, the location of mobile robots, the guide of humanoid robots, robot control, etc.Among the new applications, it is worth highlighting the use of this theme for deep learning, or intelligent systems, is focused on application in buildings.
Image processing is a topic that has been extensively investigated in recent decades.Such processing is being applied in a wide variety of fields [88].By means of image processing, the first theoretical model of the load induced on a bar electrode is developed, which until now did not exist, providing a basis for more complex future studies.Rod electrodes are based on an electrostatic induction mechanism, which are widely used in various industrial applications for their easy installation and precision [89].
Within image processing, restoration is one of the topics that is generating the most interest, as it is used in a wide variety of fields.Degraded images and certain background information are used to restore and rebuild images, improving their quality.A publication that represents a breakthrough on this topic is [90], as it proposes two new models to solve the problem of erasing images in the presence of impulsive noise.Both models improve the visual quality of the images and their signal-to-noise ratio (SNR), at the cost of a small increase in calculation time.
Visible Light Communication (VLC) Community is made up of a series of investigations that consider the characteristics of wireless communication in the visible spectrum, the development of efficient algorithms and their different applications.It is made up of 6.53% of the publications, and due to the variability of the topics covered, it has a dispersed spatial distribution, without the existence of areas of high density, as can be seen in Figure 18a.In the representation of the 10 most repeated keywords (Figure 18b), Visible Light Communication (VLC) is the most frequent, being the main theme of the community.It is followed by words that relate to the main applications of this technology, such as Motor Control, Wireless Sensors Network, Field Programmable Gate Array (FPGA) or Hybrid Electric Vehicle.Wireless communication in the visible spectrum (380 to 780 nm) uses a visible light source as the signal transmitter, a free space as the transmission medium, and a photodiode or photodetector as the receiver [91].The field of research in VLC is very extensive, considering the special interest around the development of high-speed communication systems such as that set forth in [92].It is one of the most important publications of this community, and it presents a good solution for high-speed wireless transmission by microwave transmission over an optical fiber or radio over fiber (RoF).Some of the characteristics of the developed system are a low cost, a simple architecture, possible anti-interference, high bandwidth, low transmission loss and low power consumption.The importance of this work lies in being the first to attempt simultaneous multimode wireless operation on a single optical medium.Single sideband signals are used to improve the spectral efficiency of the system and reduce chromatic dispersion.This publication lays the foundation for further research, considering the developed technique an effective candidate for mobile communications, low cost, low complexity and easy to implement.
The next largest node size post is [93], which establishes different aspects related to the positioning of visible light.The limited transmission range of the visible spectrum requires high precision positioning, being of special interest for indoor Visible Light Positioning (VLP).Therefore, positioning models based on machine learning have been established, as well as investigations based on the influence of the inclination of LEDs on positioning systems [94].
The increasing development in wireless communications in the visible light spectrum is increasingly being used to increase the reach of the Internet of Things (IoT), seemingly being a technology capable of short-range communications and soon long scope.To this end, investigations have been carried out that aim to connect intelligent vehicles or transport systems.With this sub-theme, it is worth staking the establishment of route planning systems where trajectories are coordinated using learning algorithms [95], trajectory planning algorithms for overtaking maneuvers [96], models that allow for the establishment of the dynamics of a vehicle due to its rocking while driving on the road, or evolutionary algorithms that can mimic the learning stage of a professional driver [97].All of this research aims to achieve more efficient algorithms, which increasingly resemble human behavior.
Transmission Lines Community constituted by works where aspects related to transmission lines are studied, in high or low voltage, as well as safety considerations, impedance, etc.In Figure 19a, the isolated distribution of this community is represented, where the dispersion is observed when dealing with very diverse topics.In Figure 19b, the 10 most repeated keywords are represented, the small size of the community is reflected in the low frequency of repetition of these words.The most repeated is "Power Line Communication", followed by "Cyber Physical System" and "Electromagnetic Compatibility", all of which make direct reference to power lines, and words from the main applications such as "Electric Vehicle" or "Smart Home" also appear.The most important publication of this community is [98], comparing three methods of measurement of the impedance of a network low voltage (LV) in the range Narrow Band-Power Line Communications (NB-PLC), which ranges from 9 kHz to 500 kHz.The three models studied are based on injecting a reference signal into the network, although with different methodologies.Although there is not yet a commonly accepted measurement method, validated with laboratory measurements and supported by standardization agents, the methods presented show a very good correlation with the simulations and the results obtained with a precision impedance meter.The previous publication is strongly related to others that attempt to complete the characterization of these low-voltage transmission lines in the same frequency range, such as [99].This work is among the five most important in the community, and it describes the results of a measurement campaign to characterize non-intentional emissions (NIE).They are present in the low voltage section of the electrical network, within the NB-PLC frequency range.
Another publication, related to the largest node, presents an analysis of the Flexible Gas Insulated Transmission Lines (FGILs) [100].The synergistic impact of aging is compared according to time and temperature, the effect of external and internal loads, as well as the dead weight existing in a FGIL with the results established in one form of Gas Insulated Lines (GILs).A GIL is made up of a rigid metal enclosure and its application prospects are limited to metropolitan neighborhoods due to its large intrinsic radius of curvature, its laying length and the need for trenches.FGIL consists of a flexible stranded conductor, a flexible thermoplastic enclosure, open cell foam of significant structural strength for alignment of the concentric conductor, and a compressed mixture of dielectric gases.The results and characteristics of the FGIL allow them to be considered as perfect candidates to solve the difficulties existing in metropolitan applications, since they facilitate the laying of the underground cable without ditches, providing a less expensive laying in the project and duration.
In this community, there are also publications that present energy conversion filters for these transmission lines.There works describe the design of an Electromagnetic Interference (EMI) filter for the High-Frequency Link Matrix Converter (HFLMC) [101].
The second most important job in this community is [102], as it shows a global perspective of two-dimensional electronics and optoelectronics.Materials studied in two-dimensional (2D) layers, beyond graphene, offer the opportunity to create many heterostructures without limitations of atomic commensurability.The use of these materials supposes the development of new electronic devices, being of special interest in the establishment of Field Effect Transistors (FET), Photovoltaic Cells, Light Emitting Diodes (LEDs), photodetectors, lasers and Integrated Circuits (IC).
DOA Estimation Community formed by investigations that study the concepts of radar signal processing, among which the different methods of Direction of Arrivals (DOA) estimation.This community is one of the smallest, it is in the tenth position according to its size with 4.64% of all jobs.This community is quite compact and presents an area with a high density of works as indicated in the Figure 20a.In Figure 20b, the 10 most repeated keywords are represented with very little frequency due to the size of the community.The most frequently repeated word is "DOA estimation", a fundamental theme of the community, followed by "Radar" or "Compressed sensing", terms which are typical of radar signal processing.In this community, there is no main node, but two publications appear with nodes of the same size, followed by others with a somewhat smaller size.One of these works is [103], a special issue where different radar signal processing techniques and questions about the design of radar systems are considered.Even though radar technology was developed in the early 1900s, today it still has civil and military applications.Radar signal processing is the most active area of research, with most publications focusing on Synthetic Aperture Radar (SAR) technology, for its high spatial resolution in adverse climatic conditions.The use of SAR remote sensing data can be used for a wide variety of applications, such as mapping levees to find landslides [104], for obtaining images of targets on moving ships [105], or the characterization of materials [106].
Research related to the compressed sensing (CS) theory is of interest, as it allows for the recovering of signals with fewer samples, being able to sample a signal uniformly at or above Nyquist speed.It includes aspects such as the poor representation of the signal, the design of the observation matrix and the use of a reconstruction algorithm [107].In another publications, research on DOA estimation in a system is investigated ULA with the unknown Mutual Coupling (MC) effect [108].A novel CS-based method is proposed for DOA estimation using iteratively determined unknown MC coefficients, turning the DOA estimation problem into an inverse reconstruction.The simulation results show that the proposed method significantly improves the performance of DOA estimation, beating other methods and reducing the MC effect by approximately 4 dB.
One issue to be highlighted is an offline method called a Grid Reconfiguration Direction of Arrival (GRDOA) estimation method based on sparse Bayesian learning [109].This method is characterized by having less computational complexity, reasonable precision, greater robustness and great efficiency when compared to other methods.
Smart City Community is made up of research that develops different smart devices that may constitute the concept of a smart city.For this, aspects related to buildings, communications or different services such as transport are considered.These publications represent 4.53% of the total, it is a small community compared to the rest, as indicated by its isolated spatial distribution (Figure 21a).In Figure 21b, the most repeated keywords in this community are represented, where "Smart Grid" and "Quality of Experience" are the most repeated for the importance and quality of communications in this type of environment, followed by "Internet of Things" or "Smart home".These are concepts necessary for the development of smart devices and buildings within a Smart City.In the spatial distribution, it is observed that the publications are quite scattered, divided by the diversity of applications that can be developed, despite this, around the largest node there is a greater concentration of works.This node represents the most important work in this community [110], where some of the latest technologies and services developed for smart cities are exposed, considering multidisciplinary aspects and in continuous evolution.Intelligent sensor systems are presented to determine in real time and with great sensitivity fundamental parameters such as water quality [111], or air quality [112].
The development of a hybrid communication network that serves as a communication infrastructure is key to the development of these devices, making it a widely researched area.Some of the systems developed show several advantages over conventional fiber optic communication systems, in terms of placement and installation costs, with simple infrastructures such as the system exposed in [113].Another service that is established intelligently is tourism, through the concept of RoomFort, an application for managing the comfort or convenience of hotel guests [114].By exploiting the automatic reasoning capabilities provided by semantic web technologies and the collection of data through a network of sensors, personalized comfort profiles are sent to guests.This customization is also intended to be extrapolated to other areas such as tourist information [115], or for the development of domestic environment [116].
New Transistors Community formed by the investigations that propose the development of new transistors, considering these devices as one of the precursors of current power electronics.For this, new materials of different sizes and different techniques are used.It is one of the smallest communities, made up of 3.37% of works, as well as quite dispersed when dealing with very varied topics.The isolated distribution of this community is shown in Figure 22a, where one can see the relationships between the publications.Being a small community, the number of repetitions of the keywords is low.In Figure 22b, the 10 most repeated keywords in the community are represented, "Power Amplifier" stands out, as it is the main application for which new transistors are used, or "Gallium Nitride", the most used material in new devices developed in recent years.In this community, a node of a larger size than the rest is observed [117], surrounded by other works to which the node serves as a reference.This paper presents the research trends related to new nanoelectronics materials, devices and models.The decrease in the size of the semiconductors that make up the transistors involves challenges such as low mobility of the carriers, degradation of the lower threshold slope and heat dissipation, although it produces an increase in the integration density.Carrier mobility is sought to be improved by developing Field Effect Transistors (FET) verticals with new broadband semiconductors (Gallium Nitride (GaN)), to which an additional current blocking layer is added [118].
To improve the performance of a transistor, the steep Subthreshold Slope (SS) should be considered [119].A pronounced SS can be achieved by two methods, one of them involves using a vanadium dioxide (VO2) FET switch as an Insulating-metal Transition Material (IMT), which allows a user to establish slopes of current below threshold at 42 mV/decB [120].The other method is based on using an L-shaped tunnel FET, to improve the SS [121].Additionally, it has been extensively investigated in the Drain-induced Barrier Lowering (DIBL) and in the characteristics of the leakage current of a Partial Isolation Field-effect Transistor (PiFET), for sub-0.1 µm [122].PiFET is a type of transistor in which the buried insulator is penetrated to a certain depth in the direction of the channel below the drain region, whereby the fold effect due to the floating body effect is structurally blocked.
The use of new materials in data storage devices, memory and solar cells is another area of current research.Studies that present the characteristics of new analog memories using gold/zinc dioxide/indium tin oxide (Au/ZnO/ITO) [123] devices, or the analysis of the electron affinity optimization and the band gap of a ZnO/Si [124] heterojunction solar cell.Even though all the devices in development have a higher cost, they are attracting great technological interest [125].Through its empirical analysis, the aim is to obtain information to optimize its performance and reduce unwanted defects such as deformation [126], considering that all these characteristics depend on temperature.
Cloud Computing Community formed by research that addresses the main pillars of modern computing systems, such as computing and data storage.Different tasks of massive data processing and optimization, as well as storage methodologies, are studied in order to establish efficient and reliable systems.Only 2.11% of all jobs make up this community, making it the second smallest of all those studied in this study.
In Figure 23a, its isolated distribution is represented, considering very varied and relatively recent aspects.Areas of high population density are not observed, they are quite dispersed and with weak relationships.In Figure 23b, the 10 most repeated keywords in this community are represented, showing the most repeated words "Cloud Computing" and "Data Centers", both related to data storage systems.In this community there are numerous investigations based on "Virtual Machine Placement", hence it is another example of the most repeated words.The variety of the keywords observed indicates the multidisciplinary of the applications that can be developed with this theme.In this community, there are no publications with an importance much higher than the rest, depending on the size of the nodes that represent it, almost all the works have the same size or importance.A publication slightly larger than the rest is [127], a paper that covers some concepts of computing and storage.Among the computational techniques, the most studied are those based on Oscillatory Neural Networks (ONN), inspired by the oscillatory behavior of the brain [128], or those that seek to improve their efficiency for pattern recognition tasks [129].
A topic of special interest in this field is the optimization of Virtual Machine Placement (VMP).Cloud computing offers an unlimited amount of heterogeneous resources through virtualization [130] multiple virtual machines share resources on the same Physical Machine (PM).Therefore, as many can be placed Virtual Machine (VM) as possible in the minimum number of PM, with the necessity of the optimization of the minimum amount of PM that can supply the necessary resources to host a specific quantity of VM with the lowest possible energy consumption.To minimize the placement of PM in the system, the Particle Swarm Optimization (PSO) algorithm, or an improved particle swarm optimization algorithm, is used [131].An issue of special interest in this community is the optimal virtual machine placement based on gray wolf optimization [132].Optimal virtual machine placement based on gray wolf optimization, where a gray wolf optimization (GWO)-based optimization method is applied for VMP optimization as a highly efficient discrete combinatorial problem.This work supposes the support of others like [133], which proposes a Levy-based Multi-objective Gray Wolf Optimization (LMOGWO) algorithm, for efficient VM placement resolution.The proposed algorithm mimics the leadership and hunting behavior of the Grey Wolf (GW) in the multiple target search space.The said algorithm was tested with different reference functions, achieving PM minimization rates of 30%, higher than those achieved with other methods.Research related to efficient data storage in the cloud should also be considered, for which different coding theories were developed [134], as well as programming these data centers efficiently using renewable energy [135].
DC-DC Converter Community consisting of publications studying converters that allow for the transition from one DC value to another of a different level, the different types that have been recently developed or issues related to control strategies for these devices.This community is strongly related to the community that deals with power applications, with these converters being one of the most relevant applications or developments in power electronics.The isolated distribution of this community is observed in Figure 24a, publications are represented by nodes whose size is related to their importance or relationships to other jobs.In Figure 24b, the 10 most repeated keywords in this community are represented, the smallest with 1.69% of the jobs.This fact is reflected in the low frequency of the keywords, among which "Zero Voltage Switching" and "Soft Switching" stand out the main techniques present in the new converters currently developed.Other trends are the "Bidirectional Converter" or "Boost Converter", as seen in the rest of the keywords.In this community, a publication of a much larger size than the rest does not appear, as almost all publications are of a similar size or importance.One of the works has the largest possible node size and is considered the most relevant in the community, in which different high-efficiency DC-DC converters are developed for application in renewable energy systems [136].Three isolated converter topologies are developed by combining CUK converters, with the concepts of Switched-Inductor (SL) and Switched-Capacitor (SC).In this type of DC-DC converters the output voltage may be higher or lower than the input voltage.Conventional DC-DC converters cannot be used in these systems, since an extremely high ratio is required to achieve a high voltage gain, which would degrade the conversion efficiency due to conduction losses [137].These drawbacks are also not solved with transformer-less converters, so the use of converters with coupled inductors and/or switched capacitors is proposed.These converters must use two different inputs [138], so they must be Dual-input Converters (DIC) and for high voltages to be applied and power to be produced even when the input source is turned off, it is considered a Dual-input High Step-up Isolated Converter (DHSIC).In [139], one of the most relevant publications, a DHSIC with a switched boost capacitor and an extra circuit that allows for an increase in the voltage gain is analyzed.This converter can control the dual inputs independently and individually and allows a user to suppress the voltage peak in the power switch, improving its efficiency, which can be as high as 91.40%.In the other publications, an uninsulated converter is considered, with less loss, weight and volume than isolated converters [140].
In order to increase the efficiency of conversion systems, numerous investigations based on high-efficiency systems are carried out [141].In their works, a new Zero Voltage Transition (ZVT) resonant boost converter is developed.Typical converters generate switching losses during startup and shutdown, which can cause decreased efficiency.These losses can be reduced by using smooth switching, using an auxiliary circuit with a resonant inductor, a capacitor and two auxiliary switches, or with coupled inductors [142].
One possibility within the study of DC-DC converters is the development of control strategies to obtain higher performance systems.This is established a control strategy appropriate to the topology of a three-level DC-DC converter connected to a Proton Exchange Membrane Electrolyze (PEM EL) [143].The experimental results obtained validate the performance of the converter and guarantee the correct energy consumption of the system [144].Research that coordinates development of DC-DC converter improvements and implementation of control strategies leads to more efficient dynamic systems [145].

Author Analysis, Affiliations and Countries of Publication in Journal Electronics
In this section, the authors are studied from different perspectives.In this work, 7561 authors who have contributed to their research in the journal Electronics are analyzed and are distributed in 87 different countries.In Figure 25, the top 20 author-countries with global percentages have been represented, the percentages shown in Figure 25 correspond to the totals with respect to the 87 countries, although only 20 countries are shown.The highest country number that authors correspond to is China with 2407 authors and a global percentage of 31.83%,followed by South Korea with 763 authors (10.09%) and Italy with 613 authors (8.11%).The rest of the countries contribute with less than 600 authors and with a participation below 8.00%.The rest of the countries not represented in the top 20 contribute 12.71% of the authors.This indicates that there are many countries that have contributed to publications in the Electronics journal.If we analyze the authors' H-index, it is found that most of these authors have a value that ranges from [0-9] with 75.89% of the total (Figure 27), although the total range reaches 157.The second rank is formed by 16.19% of the total and the third by 5.36%.Among the first three ranges collecting [0-29], they constitute 97.43% of the total, leaving the authors with the highest index in a minority of 2.57%.This is common in most of the studies, and this is due to the fact that there are few authors with a high H-Index, since it requires close relation in their research topics and many contributions that are very innovative to serve as a reference to other researchers in their field or nearby fields.
Table 1 shows the 20 authors with the highest H-index, collecting values from 58 to 157.From the H-Index values, those that are ≥70 are a minority.If we analyze the origin of the authors, they are concentrated in 10 countries, with four of them not included among the top 20 author-countries (Denmark, Brazil, Turkey and Belgium).In addition, the order does not coincide with the top 20 author-countries, with the United States being the one that provides five authors, which is in the fifth position of 87, followed by Denmark, Italy, and Germany, with three authors, and the rest with one

Analysis by Document Format Published in Journal Electronics
The Electronics journal publishes in five different formats in English.Figure 28 represents the distribution according to format of the 2310 documents analyzed in the search for Scopus.Of the total documents, 92.16% are found as an article (2129 documents), 5.84% as a review (135 documents), the rest have a contribution of less than 2%.These results are like those found in other work [11].

Conclusions
This work analyzed the research collected in the publications of the Electronics journal, in any of its 14 Subject Areas from 2012 to January 2020.Scopus was used as a database, collecting all the information related to each publication and a search was performed for the keyword "ISSN (20799292)".The search found 2310 documents with a total of 1463 unrelated relationships.A total of 949 publications and 1239 relationships between nodes were studied.After analyzing the publications, it was established that, due to the topics covered and their relationships, there are 14 research communities: Power Electronics, Embedded Computer System, Internet of Things, Machine Learning Systems, Wireless Communications, Digital Processing, New Methods, Visible Light Communication, Transmission Lines, DOA Estimation, Smart City, New Transistors, Cloud Computing and DC-DC Converter.The Power Electronics Community has the highest concentration of documents with 20.13% of the total number of works analyzed, followed by Embedded Computer Systems Community (13.59%) and Internet of Things (IoT) and Machine Learning Systems Community with 8.11% both, while the rest have lower contributions at 8.00%.In the spatial distribution of the communities, 12 regions are observed, leaving two of them, the smallest, immersed in the center of the communities.Almost all the communities have one or several central nodes, around which are several minor works that were studied as a sample of the research carried out in each community.The study of the keywords used both globally and by the community shows that there are a huge number of them that are only used once, the largest number of them being acronyms.This indicates that the use of acronyms in the keywords does not complete its job of giving visibility to the document in the indexing of the databases.A main conclusion after carefully analyzing the keywords in detail is that authors should select them more efficiently and limit themselves to avoid using acronyms in order to increase visibility, and thus citations to published documents.
The trend of the research collected in the journal Electronics is directed to subjects in continuous development, as it occurs in the transport sector and its electric power system [146].Academic research of general interest has been published, as well as industrial research that is being applied or may soon be applied.It should be noted that most research developments have, as their ultimate goal, the maturity of knowledge for possible application in the industrial field.An example of this can be seen in the transport sector, where a wide range of products have been developed with the aim of establishing an industrially competitive end product.In this field, research is continuing to achieve the full integration of vehicles into the 5G and IoT ecosystems, improving the communication capabilities of autonomous vehicles, remote control applications, vehicle monitoring or safety systems.Other topics of industrial interest include engine improvement, or the development of wireless biomedical sensors [24].General research or research with no industrial application so far are those that are in the start-up phase and cannot yet be safely applied in industry.An example of this is the work developing improved fuzzy logic control models for parameter optimization based on learning functions applied to the indoor environment, the development of new optimization algorithms for energy consumption, data processing [127] and flow pattern prediction.All of these topics have been developed recently, so many of them are in an initial phase, where their behavior must be studied and simulated to be applied reliably in the near future.This fact is reflected in works that address the simulation of the behavior of new devices such as small field effect transistors [147], high mobility transistors [148] and new energy converters, among others.
In addition, new Artificial Intelligence (AI)-based schemes are needed to make quick and smart decisions that will enhance driving experiences [60].The development of new broadband semiconductors together with new modulation and control techniques leads to improved miniaturization of the efficiency of electronic power converters, a device widely studied due to its wide variety of applications [149].Another device of special interest is the FPGAs where smaller designs are needed, with lower power consumption, low cost and that maintain a solid level of performance [117].The development of FPGA with these characteristics allows to develop new cutting-edge solutions, for example, in the area of sensors and smart devices [12].
Most of the publications that constitute the smaller communities, where the number of works that are related to each other is lower, comprise new fields of research.These communities are considered emerging communities, encompassing great progress.Most have appeared and fully developed in the last two years.An example of this is research studying the behavior of new devices, including the appearance of small-sized transistors (nonmetric scale) or using new, hitherto unknown semiconductor materials, such as gallium nitride.New fields of research are also considered, such as those related to cloud computing and the development of new optimization and control algorithms [127].All these concepts are currently being widely developed and aim to achieve systems with higher computing performance, which can be applied to different areas.Future research will focus on determining the negative and positive effects of time delay on control systems, such as network systems, smart grids and wireless robotics [82].More effective control schemes should be designed, along with the DOA estimation in the scenario of mobile platforms [103], as well as the development of new strategies to filter or mitigate the effect of movements on the quality of the recorded data.Another topic to study is the impact of LED design on communication performance and positioning accuracy, as well as related joint optimization for both communication and positioning [93], considering the great alternatives in the Visible Light Communication (VLC) field that will allow for this development.
of 150 in 2018), Computer Networks and Communications (position 73 of 272 in 2018), and Signal Processing (position 33 of 97 in 2018) and the Engineering subareas: Electrical and Electronic Engineering (position 162 of 658 in 2018), and Control and Systems Engineering (position 71 of 233 in 2018).
Figure 1 shows the evolution in the Engineering, Electrical and Electronic category and the outstanding position of Electronics upon its incorporation in 2017 to the category in position 107.It has been represented since its inception in 1997 with 193 magazines up to 266 magazines registered in 2018 in this category.It also joined the second quartile (2017) and dropped to the third quartile in the following year.

Figure 1 .
Figure 1.Evolution of the Engineering, Electrical and Electronic category and relationship with the journal Electronics.

Figure 2 .
Figure 2. Evolution of citations and articles in the category Engineering, Electrical and Electronic.

Figure 4 .
Figure 4. Distribution of manuscripts by section.

Figure 5 .
Figure 5. Distribution of special issues by section.

Figure 6 .
Figure 6.Distribution of published documents and citations per year on a logarithmic scale.

Figure 7 .
Figure 7. Representations for the node relationships.(a) Total node graph.(b) Node without citations filtered and colored communities.

Figure 8 .
Figure 8. Representation of the paper distribution in each of the communities.

Figure 9 .
Figure 9. Representation of global keywords for all communities.

Figure 10 .
Figure 10.Representation of the 20 most repeated global keywords.

Figure 11 .
Figure 11.Representation of the Power Electronics community: (a) Isolated distribution of publications.(b) Keywords of the community.

Figure 12 .
Figure 12.Representation of the Embedded Computer System community: (a) Isolated distribution of publications.(b) Keywords of the community.

Figure 13 .
Figure 13.Representation of the Internet of Things community: (a) Isolated distribution of publications.(b) Keywords of the community.

Figure 14 .
Figure 14.Representation of the Machine Learning Systems Community: (a) Isolated distribution of publications.(b) Keywords of the community.

Figure 15 .
Figure 15.Representation of the Wireless Communications community: (a) Isolated distribution of publications.(b) Keywords of the community.

Figure 16 .
Figure 16.Representation of the Digital Processing community: (a) Isolated distribution of publications.(b) Keywords of the community.

Figure 17 .
Figure 17.Representation of the New Methods community: (a) Isolated distribution of publications.(b) Keywords of the community.

Figure 18 .
Figure 18.Representation of the Visible Light Communication community: (a) Isolated distribution of publications.(b) Keywords of the community.

Figure 19 .
Figure 19.Representation of the Transmission Lines community: (a) Isolated distribution of publications.(b) Keywords of the community.

Figure 20 .
Figure 20.Representation of Direction of Arrivals (DOA) Estimation community: (a) Isolated distribution of publications.(b) Keywords of the community.

Figure 21 .
Figure 21.Representation of the Smart City community: (a) Isolated distribution of publications.(b) Keywords of the community.

Figure 22 .
Figure 22.Representation of the New Transistors community: (a) Isolated distribution of publications.(b) Keywords of the community.

Figure 23 .
Figure 23.Community representation Cloud Computing: (a) Isolated distribution of publications.(b) Keywords of the community.

Figure 24 .
Figure 24.Representation of the DC-DC Converter community: (a) Isolated distribution of publications.(b) Keywords of the community.

Figure 25 .
Figure 25.Distribution of authors for the 20 countries that show the highest participation (87.29% of the global) in the journal Electronics.Data referenced to global data from 87 countries.

Figure 26
Figure26represents the 87 countries with researchers who publish on topics included in the Electronics journal topics.It is observed that the Asian continent and North America are the ones that publish the most in this magazine, and the low participation of the African continent stands out.

Figure 26 .
Figure 26.Representation of the 87 countries with contributions from authors.

Figure 28 .
Figure 28.Distribution of journal Electronics publications according to document formats.