Nanotechnology Potential in Seed Priming for Sustainable Agriculture

Our agriculture is threatened by climate change and the depletion of resources and biodiversity. A new agriculture revolution is needed in order to increase the production of crops and ensure the quality and safety of food, in a sustainable way. Nanotechnology can contribute to the sustainability of agriculture. Seed nano-priming is an efficient process that can change seed metabolism and signaling pathways, affecting not only germination and seedling establishment but also the entire plant lifecycle. Studies have shown various benefits of using seed nano-priming, such as improved plant growth and development, increased productivity, and a better nutritional quality of food. Nano-priming modulates biochemical pathways and the balance between reactive oxygen species and plant growth hormones, resulting in the promotion of stress and diseases resistance outcoming in the reduction of pesticides and fertilizers. The present review provides an overview of advances in the field, showing the challenges and possibilities concerning the use of nanotechnology in seed nano-priming, as a contribution to sustainable agricultural practices.


Introduction
Agriculture is currently facing many challenges, including production losses due to pests, the effects of global climate change, and the depletion of natural resources [1][2][3]. An additional difficulty is that traditional agricultural practices have been relying on continuous application of pesticides and fertilizers, resulting in environmental contamination [3,4].
The world population is expected to increase to 9-10 billion by 2050, implying that food production will need to rise by 25-70% compared to current levels [5]. Therefore, new technologies need to be deployed in agriculture to ensure sustainability and increase productivity [2,3,6,7].
Nanotechnology has the potential to contribute to a new technology-based agricultural revolution [3,8,9]. Many nanomaterials have been developed for agricultural applications, including new solutions for soil and water remediation, as well as nanofertilizers and nanopesticides, designed to reduce the applied amounts of fertilizers and pesticides, while increasing food production and quality [2,4,8,10]. Besides, the use of nanoenabled products for crop protection can reduce significantly the impact caused by the agriculture on the environment, in this way being an ecofriendly alternative [1]. Nanomaterials, especially nanoparticles, have a range of applications for crop protection [2,3,6]. This is a major field of research that has attracted the interest of companies in the agricultural sector, resulting in the inclusion of nanoparticles in formulations [11]. Seed nano-priming topics covered in this review and its potential benefits for sustainable agriculture. In addition to providing protection for seeds during storage, the use of seed nano-priming can result in improved establishment of plants in the soil with a reduced need for fertilizers. By growing faster, plants have an increased ability to compete with weeds for resources, consequently increasing productivity and food quality. The plants may also become more resistant to abiotic and biotic stresses, resulting in reduced use of pesticides.
The aim of this review is to provide an update concerning the potential applications of seed nano-priming techniques in agriculture. Many different types of nanoparticles can be used, with effects on seed metabolism and on the subsequent plant growth and development.

Germination and Principles of Seed Priming
Germination is one of the most important steps for the establishment of plants in agriculture and is fundamental for crop quality [12,18,33]. The rapid development of seedlings ensures fast expansion of the leaves and elongation of the roots, which favor the uptake of nutrients, their translocation through the transpiration flow, and biomass production [12,34,35]. Slow germination can expose the young seedling, which is one of the Figure 1. Seed nano-priming topics covered in this review and its potential benefits for sustainable agriculture. In addition to providing protection for seeds during storage, the use of seed nano-priming can result in improved establishment of plants in the soil with a reduced need for fertilizers. By growing faster, plants have an increased ability to compete with weeds for resources, consequently increasing productivity and food quality. The plants may also become more resistant to abiotic and biotic stresses, resulting in reduced use of pesticides. most vulnerable stages of plant life cycle, to many environmental stress conditions or pathogens, resulting in decreases in vigor and crop productivity, leading to economic losses for farmers [19].
The process of seed germination is usually divided into three phases, as summarized in Figure 2a [36,37]. It begins with imbibition (phase I), when the fast water uptake triggers seed basal metabolism, as transcription, protein synthesis, and mitochondrial activity. In phase II (activation or lag phase), water uptake is limited, but the metabolism becomes hyperactive with the production of enzymes required for reserve mobilization and embryo development, including amylases, endoxylanase, and phytase. In phase III, the seeds exhibit again fast water uptake, and embryo growth culminates in radicle protrusion [36,38]. higher number of flowers [58]. Other studies have similarly demonstrated that carbon nanotubes can modulate seed metabolism in plants, such as tomato, barley, soybean, and maize, increasing the gene expression of several types of water channel proteins [59,60].
Different nanomaterials, including metallic, biogenic metallic, and polymeric nanoparticles, have also shown potential for seed nano-priming [14,54,61], resulting in the stimulation of plant growth and improvement in morphological and metabolic traits. This process can promote fast root and shoot development, with changes in the expression of genes that modulate metabolic processes, such as phytohormone production. Seed nanopriming changes the activity of the defense system, increasing the antioxidant levels and enzyme activities, so that the plants become more resistant to pests and other biotic and abiotic stresses under field conditions [12,31,53,[62][63][64].

Active Nanoparticles and Nanocarriers Systems
The potential applications of nanoparticles will be considered in two groups: (i) active nanoparticles and (ii) sustained release nanocarrier systems ( Figure 3). Table 1 shows systems that have been employed for seed priming/coating, together with their potential effects as stimulants or against biotic and abiotic stress. Seed nano-priming. The nanoparticles can be defined as (i) active nanoparticles, which are systems that can have a stimulatory effect on plant growth and development, or (ii) nanocarrier systems providing sustained release, where the nanoparticles can be active or inactive, and are loaded with an active ingredient. Table 1. Nanoparticles employed for seed priming and coating, showing the nanoparticle systems, their characteristics, and the main effects on the species evaluated. Each article is classified according its application: A1 (seed priming), A2 (effects in the field), A3 (effects against pathogens), and A4 (relieving abiotic stresses). The arrows up and down indicated an increase and decrease in activity, respectively.

Reference
Biogenic silver nanoparticles produced using kaffir lime leaf extracts Spherical nanoparticles with particle size of 6-26 nm Concentrations: 10 and 20 mg/mL Species: Rice seeds (Oriza sativa L. cv. KDML 105). Effects: Water uptake ↑, Aquaporin gene expression ↑, Enzyme activity ↑, Seed and seedlings vigor ↑ Plant morphology ↑, and biomass ↑ [14] Figure 3. Seed nano-priming. The nanoparticles can be defined as (i) active nanoparticles, which are systems that can have a stimulatory effect on plant growth and development, or (ii) nanocarrier systems providing sustained release, where the nanoparticles can be active or inactive, and are loaded with an active ingredient. Table 1. Nanoparticles employed for seed priming and coating, showing the nanoparticle systems, their characteristics, and the main effects on the species evaluated. Each article is classified according its application: A1 (seed priming), A2 (effects in the field), A3 (effects against pathogens), and A4 (relieving abiotic stresses). The arrows up and down indicated an increase and decrease in activity, respectively.

Nanoparticle System Characteristics Main Effects Applications Reference
Biogenic silver nanoparticles produced using kaffir lime leaf extracts Spherical nanoparticles with particle size of 6-26 nm Concentrations: 10 and 20 mg/mL Species: Rice seeds (Oriza sativa L. cv. KDML 105). Effects: Water uptake ↑, Aquaporin gene expression ↑, Enzyme activity ↑, Seed and seedlings vigor ↑ Plant morphology ↑, and biomass ↑ higher number of flowers [58]. Other studies have similarly demonstrated that carbon nanotubes can modulate seed metabolism in plants, such as tomato, barley, soybean, and maize, increasing the gene expression of several types of water channel proteins [59,60]. Different nanomaterials, including metallic, biogenic metallic, and polymeric nanoparticles, have also shown potential for seed nano-priming [14,54,61], resulting in the stimulation of plant growth and improvement in morphological and metabolic traits. This process can promote fast root and shoot development, with changes in the expression of genes that modulate metabolic processes, such as phytohormone production. Seed nanopriming changes the activity of the defense system, increasing the antioxidant levels and enzyme activities, so that the plants become more resistant to pests and other biotic and abiotic stresses under field conditions [12,31,53,[62][63][64].

Active Nanoparticles and Nanocarriers Systems
The potential applications of nanoparticles will be considered in two groups: (i) active nanoparticles and (ii) sustained release nanocarrier systems ( Figure 3). Table 1 shows systems that have been employed for seed priming/coating, together with their potential effects as stimulants or against biotic and abiotic stress. Seed nano-priming. The nanoparticles can be defined as (i) active nanoparticles, which are systems that can have a stimulatory effect on plant growth and development, or (ii) nanocarrier systems providing sustained release, where the nanoparticles can be active or inactive, and are loaded with an active ingredient. Table 1. Nanoparticles employed for seed priming and coating, showing the nanoparticle systems, their characteristics, and the main effects on the species evaluated. Each article is classified according its application: A1 (seed priming), A2 (effects in the field), A3 (effects against pathogens), and A4 (relieving abiotic stresses). The arrows up and down indicated an increase and decrease in activity, respectively.

Reference
Biogenic silver nanoparticles produced using kaffir lime leaf extracts Active nanoparticles are nanoparticles that themselves can cause a biological effect, acting as a stimulant, an anti-pathogen, or both [14,61,66]. Nanocarriers with sustained release features are systems where the nanoparticle (being itself active or not) is loaded with an active ingredient (biological or synthetic) and provides extended release of this compound over time [8,9,54,88].
Metallic nanoparticles are an example of active nanoparticles that can be prepared employing either chemical or biological synthesis [14,31,65]. Polymeric nanoparticles are other potentially active systems, since many of the polymers used for their preparation present biological activity [62,70,73]. These systems can be used for sustained release after being loaded with substances, including pesticides, fertilizers, biological compounds, or even other nanoparticles. The sustained release of these substances can result in higher biological activity and reduced toxic effects [54,78,89]. Many products that are used for seed priming can be loaded into nanocarrier systems, consequently improving their biological activities [54,78,82].

Active Nanoparticles
Metallic nanoparticles, including those produced using biogenic processes, are systems that are normally smaller than 100 nm. These systems have received special attention for seed nano-priming, since many of them are prepared with metals that play important roles in plant metabolism and plants biofortification [1,77].
Some examples of these metals are iron, zinc, and manganese. Iron is a co-factor for enzymes, such as cytochrome P450s and Fe(II)/2-oxoglutarate-dependent oxygenase, which makes it an essential nutrient in various metabolic pathways, including respiration and photosynthesis [31,75]. Zinc is another metal essential for plant metabolism. Around 30% of the global lands is deficient in this micronutrient, leading to problems in sugar production and the synthesis of cell membranes, hormones, and proteins, affecting seedling vigor, photosynthesis, and plant defense systems [33,64]. Manganese acts as a co-factor for enzymes as superoxide dismutase (involved in antioxidant response) and the oxygen-evolving complex of photosystem II [29].
Seed nano-priming using nanoparticles based on these metals has shown considerable potential for agricultural applications. For example, Dileep Kumar et al. [67] primed Chilli seeds with metal oxide nanoparticles (zinc, titanium, and silver) and found that zinc oxide nanoparticles improve germination and seedling development (shoot and root length), while these effects are not observed for the other tested metal-based nanoparticles (titanium and silver). According to Rizwan et al. [66], seed priming with zinc oxide and iron oxide nanoparticles improved plant development at high concentrations, increasing spike length, plant biomass, chlorophyll contents, and photosynthetic parameters in [86] Molybdenum nanoparticles combined with the bacteria Mesorhizobium ciceri ST282 and Bacillus subtilis Ch13 Nanoparticles with size of 35-50 nm Concentrations: 10 mg/L of nanoparticles, 10 8 CFU/mL − of M. cicero ST282, and 10 7 CFU/mL of B. subtilis Ch13. Species: Chickpea (Cicer arietinum L.). Effects: Seed and seedlings vigor ↑, Plant morphology ↑ Anti-oxidant enzymes ↑, and Harvest ↑ [87] Active nanoparticles are nanoparticles that themselves can cause a biological effect, acting as a stimulant, an anti-pathogen, or both [14,61,66]. Nanocarriers with sustained release features are systems where the nanoparticle (being itself active or not) is loaded with an active ingredient (biological or synthetic) and provides extended release of this compound over time [8,9,54,88].
Metallic nanoparticles are an example of active nanoparticles that can be prepared employing either chemical or biological synthesis [14,31,65]. Polymeric nanoparticles are other potentially active systems, since many of the polymers used for their preparation present biological activity [62,70,73]. These systems can be used for sustained release after being loaded with substances, including pesticides, fertilizers, biological compounds, or even other nanoparticles. The sustained release of these substances can result in higher biological activity and reduced toxic effects [54,78,89]. Many products that are used for seed priming can be loaded into nanocarrier systems, consequently improving their biological activities [54,78,82].

Active Nanoparticles
Metallic nanoparticles, including those produced using biogenic processes, are systems that are normally smaller than 100 nm. These systems have received special attention for seed nano-priming, since many of them are prepared with metals that play important roles in plant metabolism and plants biofortification [1,77].
Some examples of these metals are iron, zinc, and manganese. Iron is a co-factor for enzymes, such as cytochrome P450s and Fe(II)/2-oxoglutarate-dependent oxygenase, which makes it an essential nutrient in various metabolic pathways, including respiration and photosynthesis [31,75]. Zinc is another metal essential for plant metabolism. Around 30% of the global lands is deficient in this micronutrient, leading to problems in sugar production and the synthesis of cell membranes, hormones, and proteins, affecting seedling vigor, photosynthesis, and plant defense systems [33,64]. Manganese acts as a co-factor for enzymes as superoxide dismutase (involved in antioxidant response) and the oxygen-evolving complex of photosystem II [29].
Seed nano-priming using nanoparticles based on these metals has shown considerable potential for agricultural applications. For example, Dileep Kumar et al. [67] primed Chilli seeds with metal oxide nanoparticles (zinc, titanium, and silver) and found that zinc oxide nanoparticles improve germination and seedling development (shoot and root length), while these effects are not observed for the other tested metal-based nanoparticles (titanium and silver). According to Rizwan et al. [66], seed priming with zinc oxide and iron oxide nanoparticles improved plant development at high concentrations, increasing spike length, plant biomass, chlorophyll contents, and photosynthetic parameters in leaves. Moreover, the plants presented high concentrations of Zn and Fe after seed priming. Maswada et al. [65] reported an increase in seed germination and plant growth in sorghum treated with iron oxide nanoparticles. Treatment at 500 mg/mL increased photosynthetic pigments and biomass. Treatments at 100 and 500 mg/mL increased the relative water content in leaves.
Duran et al. [53] showed that copper nanoparticles had different effects in bean plants according the nanoparticle size and concentration, with low concentrations and larger nanoparticles resulting in a higher biomass, while high concentrations inhibited seed germination, independently of nanoparticle size.
Biogenic nanoparticles prepared using biological extracts from plants, fungi, or bacteria can have high contents of phytochemicals compounds, including phytomolecules rich in hydroxyl and carbonyl functional groups, such as phenolics, flavonoids, terpenoids, sugars, and proteins. These compounds are natural reducing agents for metals and can act as capping that stabilizes the nanoparticles in colloidal solutions [34].
As an alternative methodology for the synthesis of metallic nanoparticles, green synthesis is more economical compared to chemical methods and has the advantages of increasing biocompatibility and avoiding the use of toxic chemicals [19]. Many biogenic metallic nanoparticles have been shown to present improved biological effects, as well as lower (or no) phytotoxicity, compared to metallic nanoparticles synthesized using chemical methods [64,72].
Some metallic nanoparticles can become toxic to seeds or plants due to the re-oxidation process. For example, silver nanoparticles can be re-oxidized (from Ag 0 to Ag + ions) within seeds and plants, and the ionic form can inactivate proteins and enzymes, resulting in toxic effects [72]. However, bioactive compounds present as coatings on biogenic nanoparticles can act as stabilization agents, avoiding the re-oxidation reaction and consequently increasing the biocompatibility of metallic nanoparticles [72,83]. Different biogenic metallic nanoparticles have been shown to be able to enhance seed germination, improve plant growth and development, and increase the levels of chlorophyll and antioxidants [12,31,34,77].
Itroutwar et al. [64] found that biogenic zinc nanoparticles produced from brown seaweed (Turbinaria ornata) extracts increased seed germination, vigor index, and seedling development. In addition, the plants showed high contents of antioxidant enzymes, and there was a dose-response accumulation of zinc in the seedlings, according to the concentration used for seed priming. Mahakham et al. [34] primed aged maize seeds with biogenic gold nanoparticles synthesized using galangal rhizome extracts. They showed that the treatment at 10 ppm improved the emergence from aged seeds by 83% and seed vigor index by 3-fold, compared to the control, and increased chlorophyll content. Mahakham et al. [14] found that priming rice seeds with biogenic silver nanoparticles produced using kaffir lime leaf extract increased the α-amylase activity and water uptake of the seeds, improving both germination and plant biomass [15]. Kasote et al. [31] primed watermelon seeds with biogenic iron nanoparticles produced using onion extracts, which resulted in the increase of germination and growth of shoots and roots. The nanoparticles did not cause adverse antioxidant and chlorophyll effects, compared to the effects of the bulk counterparts (FeCl 3 and Fe 2 O 3 ). The nanoparticles were taken up and translocated into the seed endosperm, leading to increased non-enzymatic antioxidant levels and the induction of jasmonates-linked defense responses in the seeds.
Acharya et al. [19] performed, for 2 years, priming onion seeds with biogenic silver and gold nanoparticles produced using onion extract. The treatments resulted in increase of seedling emergence, number of leaves, plant weight, and productivity, compared to unprimed and hydro-primed seeds. The results also showed metabolic effects, with increases of chlorophylls a and b. The gold nanoparticles provided better results than the silver nanoparticles.
Biogenic metallic nanoparticles can act as delivery systems, since many secondary metabolites may adhere on the nanoparticle surface. These metabolites can have different biological actions that improve plant metabolism and growth [64,90]. In addition, many biological extracts have fungicidal or bactericidal properties and can be used in the protection against pathogens [91,92]. Furthermore, metallic or biogenic metallic nanoparticles can be taken up by seeds more easily due their small sizes and trigger secondary metabolites more efficiently, providing stronger action in development of the embryo [14,31,35].
Chitosan is another biopolymer that has been used to prepare nanocarrier systems for agricultural applications. This polymer has fungicidal properties and also acts in plant metabolism, activating defense mechanisms [94,107,108]. The concentration of this biopolymer is a key consideration, since high concentrations block seed germination [73]. This effect is because oligosaccharides and polysaccharides can elicit physiological responses in plants, high concentrations causing cell apoptosis, while low concentrations have stimulant effects [62].
Biopolymeric nanoparticles can be used as carrier systems for metal micronutrients, allowing a slow release of these compounds. Saharan et al. [85] showed that the priming of maize seeds with chitosan nanoparticles containing copper induced α-amylase and protease activities and promoted reserve mobilization, thus favoring seedling growth. In contrast, the treatment with bulk copper led to inhibitory effects. Similarly the priming with zinc-loaded chitosan nanoparticles induced the activity of hydrolytic enzymes in maize seeds, favoring germination.
Nanocarrier systems for plant growth regulators have shown potential for seed priming, providing improvements from seed germination up to production [54,82]. Falsini et al. [54] used lignin nanoparticles containing gibberellic acid to coat arugula and tomato seeds. The effects varied according to the time of sowing after the treatment. In arugula seeds, the formulations improved germination and increased the stem and root lengths and the plant biomass. Similar effects were observed for tomato seeds, varying according to the parameter and the concentration used. The ability of active nanoparticles or nanocarrier systems to increase seed germination can be explained by the fact that, at optimal concentrations, nanoparticles are able to penetrate the seed coat, increasing the number of holes in the coat and, consequently, increasing water uptake and oxygen transfer [58,75,76].
In another work with tomato seed priming, Pereira et al. [82] reported that chitosanbased nanocarrier systems of gibberellic acid were able to improve not only initial seedling growth but also fruit production under field conditions . In this study, the seed nano-priming was able to increase the production in 225.5% and 178.8% for chitosan/tripolyphosphate and alginate/chitosan nanoparticles containing gibberellic acid, respectively. The methods used to prepare these nanoparticles do not involve organic solvents, being interesting method aiming a sustainable agriculture [97,109].
Muthuhrishnan et al. [81] used chitosan nanoparticles loaded with thiamine to prime chickpea seeds. This procedure improved seed germination, induced a 10-fold increase of auxin level in seedlings, and boosted the quantity of secondary roots.
The improvement of the biological efficacy of active compounds by nanocarrier systems is associated to the enhancement of physical-chemical proprieties. Effects, such as increased solubility, protection against degradation, and greater bioavailability, can reduce the required concentration of the active compound and minimize toxic effects [6,110]. Several studies have shown that seed-nano priming can be more efficient than conventional methods and can contribute to improved agricultural practices [14,19,78]. Many systems defined as nanopesticides or nanofertilizers, used in the control of pests or for plant development, have the potential for use in seed nano-priming [3,8,111].

Seed Nano-Priming and Effects on Plant Metabolism under Abiotic and Biotic Stresses
Abiotic and biotic stresses lead to reduced production and economic losses. Abiotic stresses are environmental factors, such as drought, flood, heat or cold, salinity, or nutrient-deficient soils. Biotic stresses are caused by microbial pathogens (bacteria or fungi), insects, or weeds that compete for nutrients [4,8].
The use of seed nano-priming in agriculture can improve the quality of seeds and increase resistance against stress conditions. Nanoparticles can act directly against pathogens, as well as alter the metabolism of seeds and plants, consequently enhancing the innate immune system, altering hormone production, and making the plants more resistant to diseases or abiotic stress [112].
The nanoparticles uptake under seed coating can promote the ROS production, acting in different metabolic pathways, increase the level of active gibberellins, and the mobilization of storage proteins [35]. In addition, the effect of nanoparticles in increasing water uptake by the seeds can cause sufficient stress to activate germination, increasing the activities of enzymes in phases I and II of the process [76] (Figure 4a). Seed nano-priming has been shown to increase germination, since these systems are able to keep ROS levels in the optimum range comprised by the oxidative window that promotes seed germination (Figure 4b) [31,75].
Under stress conditions, nanoparticles can act to reduce seed ROS levels, due to increased activity of enzymes, such as superoxidase dismutase, catalases, and guaiacolperoxidase, hence reducing seed cell damage [75].
The storage of seeds for long periods at low temperatures results in aging, which can heavily decrease the germination rate [34]. After long periods, the seed cells initiate processes that increase ROS generation and reduce antioxidant levels, causing metabolic side effects that result in a reduction of the germination index [75].
The use of biogenic metallic nanoparticles has been shown to be able to ROS at optimum levels, resulting in improved germination of aged seeds. The biogenic nanoparticles can be coated with many compounds that are natural reducing agents and act to decrease ROS levels in seeds [14,75].
ing in different metabolic pathways, increase the level of active gibberellins, and the mobilization of storage proteins [35]. In addition, the effect of nanoparticles in increasing water uptake by the seeds can cause sufficient stress to activate germination, increasing the activities of enzymes in phases I and II of the process [76] (Figure 4a). Seed nano-priming has been shown to increase germination, since these systems are able to keep ROS levels in the optimum range comprised by the oxidative window that promotes seed germination ( Figure 4b) [31,75].

Biotic Stress
Seed protection is required at different times during agricultural practices. In the field, the seeds and seedlings need to be protected against insects, fungi, and bacteria that can damage the seed and reduce germination or seedling growth. During harvesting and storage, seeds carry microorganisms from the field. These may shorten the shelf-life of the product or lead to the accumulation of microbial metabolites that make the products dangerous for consumption [113].
In the field, the use of fungicides and neonicotinoids for seed coating can reduce the damage caused by these organisms during plant establishment [56]. This method has shown excellent potential compared to foliar applications [114,115]. Relative to foliar treatment, the use of pesticides for seed treatment can reduce the amounts of the chemicals applied in the field, as well as decrease the number of runs of agricultural machines on the land (avoiding soil compaction); so, the technique can be considered economically and environmentally advantageous [114]. The technology of seed treatment in developing countries is expected to reach a gain of US$ 1.63 billion [32].
Seed coating techniques employ fungicides that may be released in the field during the sowing process, resulting in environmental contamination. For example, pesticides, such as carbofuran and thiran, are highly toxic and persistent in the environment [11], so the consumption of treated seeds by animals, such as granivorous birds, can lead to poisoning or death [56].
Because nanoparticles are reactive and physiochemically dynamic materials, they tend to heteroaggregate in environmental media [116]. This can result in an effective seed coating, limiting the release of these compounds in the environment [116].
Nonetheless, the use of nanoparticles for seed priming and coating can provide ecofriendly solutions. Many of these systems are nontoxic, biodegradable, and can increase the bioefficacy of active ingredients used at low concentrations [14,73,78].
Several systems have been shown to be effective against pathogens. Ahuja et al. [68] demonstrated that iron(II) sulfide nanoparticles were more effective than the fungicide carbendazim to control the fungus Fusarium verticillioides in rice seeds. Silver nanoparticles are active against plant pathogens, including Aspergillus flavus, Aspergillus niger, Aspergillus fumigatus, and Colletrotrichum capsica, showing great potential for seed protection. Metallic nanoparticle systems can be used for both seed priming and seed protection, as demonstrated for nanoparticles composed of iron [68], copper [117], silver [14], and silica [78]. Sathiyabama and Muthukumar [73] primed rice seeds with chitosan/guar nanoparticles, which resulted in increased plant development and higher levels of chlorophyll and carotenoids, the nanoparticles showing anti-fungal activity (71%) against the rice pathogen Pyricularia grisea. For pearl millet, Nandhini et al. [113] showed that seed nano-priming and foliar application of zinc nanoparticles reduced downy mildew caused by Sclerospora graminicola. Dileep Kumar et al. [67] showed that nanoparticles of zinc, titanium, and silver could reduce pathogen infection as Aspergillus flavus, Aspergillus niger, Aspergillus fumigatus, and Colletrotrichum capsica in Chilli seeds.
Siddaiah et al. [61] showed that the treatment of millet seeds with chitosan nanoparticles resulted in alteration of the innate immune system of the plants and increased resistance against pathogens. The treatment improved the levels of antioxidant enzymes and increased expression of proteins involved in the salicylic acid pathway, which is related to plant resistance responses against biotrophic pathogens. The field studies of Choudhary et al. [86] showed that the treatment of maize seeds with zinc-containing chitosan nanoparticles resulted in plants with higher activity of antioxidant enzymes and lignin concentrations, making the plants more resistant to pathogens. Bravo Cadena et al. [78] showed that silica nanoparticles loaded with cinnamon essential oil and applied to pea seeds acted as seed primers and provided bactericidal activity against Pseudomonas syringae pv. pisi, even at low concentrations. The seeds showed fast germination, and the cinnamon essential oil provided a 90,000-fold increase in bactericidal activity in comparison to the non-encapsulated oil. The use of essential oils with fungicidal or bactericidal properties for seed priming is a promising eco-friendly alternative to chemical fungicides or bactericides [78,86,89].
Techniques employed during the storage of cereals include the control of humidity and temperature to minimize the growth of microorganisms, as well as the use of chemical products, although the latter may be viewed negatively by consumers, who prefer natural products [113]. For this purpose, the use of biopolymers or essential oils with activities against pests can provide a greener alternative to agrochemicals, avoiding problems associated with residual contamination.

Abiotic Stress
Harvest yields can be drastically decreased by soil salinity and contamination [65]. Salinity represses plant growth due to water and nutritional deficits and direct ionic effects on plant metabolism [63]. Contamination with heavy metals may be both anthropogenic (due to fertilizer applications, industrial processes, atmospheric deposition following waste incineration, and discharges of sewage and sludge) and geogenic (due to natural atmospheric deposition or regional geological processes) [30,118,119].
Ye et al. [29] showed that jalapeño pepper seeds (Capsicum annuum L.) primed with manganese nanoparticles presented improved germination and root elongation under saline conditions, as well as alleviated salt stress by modulating successfully the distribution of sodium between roots and shoots, through control of the oxidative stress.
Abdel-Latef et al. [63] demonstrated that lupin seeds primed with zinc nanoparticles mitigated the salinity stress condition, avoiding reductions of growth parameters (root and shoot lengths; fresh and dry weights) and photosynthetic pigments.
Maswada et al. [65] reported that sorghum seeds treated with nano-iron(III) showed improved germination, with the plants showing increased chlorophyll contents and improved growth under saline conditions. These results indicate that this system could be used not only to improve seed germination but also to avoid stress conditions. In another study, priming lupin seeds with zinc nanoparticles improved plant development under saline conditions, due to increased levels of photosynthetic pigments, phenols, organic molecules, and antioxidant enzymes.
In a case of heavy metal contamination, Rizwan et al. [66] showed that priming of wheat seeds with iron and zinc nanoparticles reduced the absorption of cadmium, resulting in low cadmium concentrations in the grains. Zinc nanoparticles reduced cadmium levels in shoots, roots, and grains by 38%, 55%, and 83%, respectively. The iron nanoparticles reduced cadmium levels in the shoots, roots, and grains by 54%, 56%, and 84%, respectively. The plants presented high concentrations of zinc and iron after seed priming [68]. Hussain et al. [30] demonstrated that, when germinated in soil contaminated with cadmium, seed priming with silicon nanoparticles was able to reduce cadmium uptake, to increase plant biomass, photosynthetic rate, and levels of carotenoids and chlorophylls a and b, and to decrease the formation of reactive oxygen species and antioxidant enzymes activity.
Soil deficiency of nutrients, such as iron and zinc, can affect the production of phytohormones involved in plant defense responses, including jasmonic acid and salicylic acid [31,86]. Kasote et al. [31] primed watermelon seeds with biogenic iron nanoparticles prepared using onion extract. The plants showed increased levels of jasmonic acid and of its precursor cis-(+)-12-oxo-phytodienoic acid during the early seedling stage, which could increase the resistance to stress.
Nguyen et al. [117] showed that maize seed priming with cooper nanoparticles can enhance drought resistance in plants. The leaves kept high water content, increased the levels of anthocyanin, chlorophyll, and carotenoids, and reduced the oxidative stress.
These results showed the potential of seed-nano priming to relieve plant stress caused by saline conditions, drought, the presence of heavy metals, or nutrient deficiency, with the modulation of metabolism to resist stress conditions and improve plant growth (Figure 4c). The use of seed nano-priming to trigger plant resistance to abiotic stress is a strong alternative to avoid side effects of global climatic crisis or anthropogenic and geogenic effects, in order to reduce losses in the field production.

Molecular Responses Induced by Seed Priming During Germination, Abiotic and Biotic Stress
Nanoparticles are able to interact with plant cells and to be internalized in different cell compartments. Seed nano-priming can initiate or alter many genes expression profiles and biochemical pathways [28,35] during the germination step and even over time [14,27].
Water exchange during the imbibition phase is the first step of seed germination. During this germination process, seed priming with nanoparticles can induce the expression of aquaporin genes, increasing water uptake in seeds [14,59]. Multiwalled carbon nanotubes air-sprayed on seeds of crops (barley, corn, and soybean) activated the expression of seedlocated water channel genes (aquaporins) from different subfamilies [59]. According to Mahakham et al. [14], aquaporin genes were overexpressed in rice seeds (Oriza sativa L. cv. KDML 105) primed with silver nanoparticles. Aquaporins allow the diffusion of water across biological membranes and facilitate the transport of gases (CO 2 , NH 3 ), nutrients, and ROS (especially H 2 O 2 ). Thus, together with the induction of aquaporin genes triggered by seed nano-priming, the authors reported a faster germination than in controls.
An et al. [27] used transcriptomic analyses of cotton seeds primed with cerium oxide nanoparticles coated with the antioxidant poly(acrylic acid) and exposed or not to a saline stress. Seeds treated with nanoparticles, under no saline stress, resulted in the expression of 7799 different genes in comparison to the control. In salinity conditions, the authors described that the nano-primed seeds expressed 13 genes related to ROS pathways and 10 genes related to ion homeostasis.
In another example, Ye et al. [29] showed that manganese nanoparticles used for seed priming of Capsicum annuum L. also promoted the seedling growth under saline conditions. In this study, the primed seeds up-regulated MnSOD gene (Mn superoxide dismutase), increasing SOD enzyme levels, which defends plant cells against ROS damage, avoiding the phytotoxic effects.
The seeds' nano-priming treatment also demonstrated to regulate resistance genes against biotic stress. Siddaiah et al. [61], showed that seeds treated with chitosan nanoparticles increased the resistance against downy mildew disease caused by the biotrophic oomycete Sclerospora graminicola. The seed priming improved the innate immune system. The plants increased the expression of genes of phenylalanine ammonia lyase, peroxidase, and polyphenoloxidase. Moreover, the plants overexpressed pathogenesis-related (PR) genes (PR1 and PR5), that are involved in the salicylic acid pathways.
Plaksenkova et al. [120] reported that barley seeds exposed to zinc oxide nanoparticles increased the expression of the microRNAs miR156 and miR159, that are involved in the plant mechanisms against abiotic and biotic stress.
In summary, the effects of seed nano-priming at molecular level and how nanoparticles modulate gene expression are not totally elucidated, and research in this field is extremely important. The different kinds of nanoparticles, treatments, and concentrations can result in different responses in plant metabolism. In addition, nanoparticles can act as a signal or co-factors improving the regulation of transcription of genes related to phytohormones and response to biotic and abiotic stress conditions [29,35].

Effects on Microbiota
The effect of seed nano-priming on plant microbiota is a fairly new area requiring further studies. The interaction between plants and microorganisms is essential for agriculture, since these symbiotic relations are important for the absorption of nutrients, defense against pathogens, plant quality, and productivity [87].
The foliar application of nanoparticles can modulate the root microbial community. Raliya et al. [121], showed that foliar application of zinc nanoparticles to mung beans led to an extension of the rhizosphere zone, with root volume increasing by 58.9%. They also reported increases in the activity of rhizosphere enzymes, such as acid phosphatase (98.07%), alkaline phosphatase (93.02%), and phytase (108%). These factors are extremely important for the uptake of nitrogen and phosphorus by plants.
Dai et al. [122] found that roots exposed to cerium oxide nanoparticles decreased the rhizosphere bacterial community but enhanced the growth of microorganisms that promote plant growth.
Other studies have reported side effects in the soil microbiota following amendments with nanoparticles. Zhang et al. [123] found that silver nanoparticles (at 100 mg/kg) altered the soil pH and negatively affected microorganisms involved in nitrogen, carbon, and phosphorus cycles. In another study, Li et al. [124] showed that the amendment of soils with silver nanoparticles (10.4 mg/kg) reduced plant development and resulted in silver bioaccumulation.
Other metallic nanoparticles, such as titanium and zinc nanoparticles, have been found to affect the soil microbiota, depending on the concentration and the duration of exposure [125,126]. Apart from the intrinsic properties (chemical nature, size, coating) and concentration, the impact of nanoparticles on plant root and rhizosphere microbiota are largely dependent on soil texture, pH, organic matter content, and fertilization [127][128][129].
Few studies have investigated how seed nano-priming might affect the interactions of microorganisms with roots. Rahman et al. [71] showed that seed priming using platinum nanoparticles stabilized with poly(vinylpyrrolidone) resulted in side effects on the root microbiota of pea plants, with a decrease in mycorrhizal fungi and rhizobial colonization, while these effects were not observed for the same system with gold or silver nanoparticles.
More studies in this field must be encouraged in order to elucidate the mechanisms by which seed-nano priming can affect seed metabolism and alter the microbiome selected by the roots during development of the plant. Many nanoparticle systems have shown great potential for use in agriculture but could be toxic towards soil microbiota. The treatment of seeds may offer a safer way to improve the establishment of plants and avoid side effects in the soil, since the treatment is performed on the seeds, avoiding applications in soils.

Improving Crop Quality and Production
Seed nano-priming can increase the productivity of different crop species, due to the positive effects on plant metabolism and development. Fast root development increases the potential of the plant to access nutrients and water, accompanied by faster expansion of the leaf area, consequently increasing the use of light energy for plant growth.
The effects on the innate immune system can improve the resistance against pathogens, so that smaller quantities of pesticides need to be applied. Consequently, the concentrations of residual agrochemicals in food are lower, making the products safer for consumption. These effects have been demonstrated in studies evaluating the effects of seed priming, up to harvest, in species with agronomical value.
Yasmeen et al. [79] showed that, in wheat plants, seed priming with iron and copper nanoparticles led to improvements of spike length, number of grains per spike, and grain weight. Rahman et al. [71] reported that priming of pea seeds with platinum nanoparticles stabilized with poly(vinylpyrrolidone) increased production by 163.5%, although the seed weight was reduced by 66.7%.
Acharya et al. [12]) demonstrated the potential benefits of priming watermelon seeds with biogenic silver nanoparticles produced using onion extracts. The results revealed a burst in plant development and increased metabolic activity throughout the life of the plant, resulting in production increases between 31.6% and 35.6%.
Pereira et al. [82] reported that the priming of tomato seeds with alginate/chitosan nanoparticles containing gibberellic acid greatly improved fruit production, increasing productivity by almost 4-fold.
Joshi et al. [76] showed that wheat seeds treated with multi-walled carbon nanotubes resulted in the increases of seed germination, root length, number of root hairs, shoot length, plant weight, number of stomata, and size of average length of vascular systems (xylem and phloem). At 90 µg/mL, there were increases of 21% and 27% for spike length and weight, respectively, 20% for the number of spikelets, and 32% for grain production.
Another issue concerns biofortification. For example, the treatment of seeds with iron, zinc, and manganese nanoparticles resulted in plants and grains with higher contents of these minerals [74]. Other studies have also reported that increased concentrations of these elements in roots, shoots, leaves, or grains can result in vegetables richer in essential minerals [66,74].
Seed nano-priming can be an effective way to reduce the amounts of fertilizers applied to crops. A major problem in agriculture is that only 30-50% of the nitrogen and 45% of the phosphorus applied in the field are absorbed by the crops [77]. These losses can be harmful to the environment, since they can lead to the eutrophication of aquatic systems and contamination of native terrestrial ecosystems.
Das et al. [77] in fields studies showed that rice seeds primed with nano-pyrite (FeS 2 ) promote the same productivity found for untreated seeds, with seedlings grown in the presence of fertilizers.
The use of seed nano-priming has been shown to improve root development and increase the production of enzymes required for nutrient uptake, which would enable reductions of the amounts of fertilizer used in the field [75].

Concerns
Although nanoparticles have potential for use in seed priming or seed coating, caution must be exercised in the application of nanomaterials. The safe use of these systems demands the development of appropriate regulations based on sound research, not only in agriculture, but also in many other industrial sectors [5,130]. Legal frameworks are required for industrial production of nanomaterials, treatment of industrial waste, and agricultural applications, together with evaluation of the fates of these nanoparticles in the environment, considering their possible ecotoxicity.
Agricultural activities are connected with many ecosystems that may be directly impacted by nanomaterials [3]. Therefore, it is crucial to understand the mechanisms of action of these materials and to develop nanoparticles that are safe in both the field and the wider environment.
Before seed treatment, it is necessary to evaluate the conditions employed for priming, considering the nanoparticle size and concentration, and the duration of exposure, since these factors can cause side effects, such as germination inhibition, reduced plant development, detrimental alterations of metabolism and cell structure, and modification of root-microbiota interactions [56,66,71].
It is essential to understand how the physical-chemical properties of nanoparticles affect seeds and other associated organisms, in order to be able to design nanoparticles that are both effective and present minimal toxic effects [8].
The different kinds of nanoparticles cited in this article (metallic, biogenic metallic, and polymeric nanoparticles) not only differ in their physical chemical characteristics, but also in their biological activity. The design of these nanoparticles for seed priming can be used for different strategies, as example seed protection, biofortification, plant resistance against pests and abiotic stresses, or even the mix of these effects.
However, the use of nanoparticles for seed priming can provide great advantages. The treatments in seeds reduce the exposition of nanomaterials compared with foliar and soil applications. Another positive point is the low concentrations of nanoparticles used for seed priming, that can be a through a controlled form by factories, avoiding high release of this materials in the environment. Probably, the residual of nanoparticles in plants will be very small or even none, but studies are necessary to elucidate how different nanoparticles as metallics, metallics biogenic, and polymerics interact with the plant development.

Conclusions
Nanotechnology is a promising area for exploitation in agriculture, and seed-nano priming is one of the tools that can be employed to promote sustainability.
The use of nano-based technology for seed treatment has potential to move the traditional agriculture based on the use of agrochemicals to a more sustainable agriculture, once these systems can promote the establishment of plants, as well as provide protection against biotic and abiotic stresses, resulting in improvements of productivity and food quality. All these factors together can result in a system safer for farmers and consumers, with respect to the environment avoiding the continuous damage caused by the conventional agriculture.
There are many issues that need to be addressed concerning the industrial production of these technological systems and their application in the field, including scale-up, seed priming conditions, and toxic effects in plants and other organisms. However, it is clear that the adoption of nanoparticle systems can alter crop management, with reduction