Dinescu, M.; Vasilescu, V.G.; Ciocan, L.T.; Voicu-Balasea, B.; Țâncu, A.M.C.; Ripszky, A.; Miculescu, F.; Răuță, S.-A.; Cârstea, A.-E.; Pantea, M.;
et al. Evaluation of Post-Processing Time’s Influence on Biocompatibility of 3D-Printed Denture Base Resins. J. Funct. Biomater. 2026, 17, 188.
https://doi.org/10.3390/jfb17040188
AMA Style
Dinescu M, Vasilescu VG, Ciocan LT, Voicu-Balasea B, Țâncu AMC, Ripszky A, Miculescu F, Răuță S-A, Cârstea A-E, Pantea M,
et al. Evaluation of Post-Processing Time’s Influence on Biocompatibility of 3D-Printed Denture Base Resins. Journal of Functional Biomaterials. 2026; 17(4):188.
https://doi.org/10.3390/jfb17040188
Chicago/Turabian Style
Dinescu, Miruna, Vlad Gabriel Vasilescu, Lucian Toma Ciocan, Bianca Voicu-Balasea, Ana Maria Cristina Țâncu, Alexandra Ripszky, Florin Miculescu, Sabina-Ana Răuță, Alexia-Ecaterina Cârstea, Mihaela Pantea,
and et al. 2026. "Evaluation of Post-Processing Time’s Influence on Biocompatibility of 3D-Printed Denture Base Resins" Journal of Functional Biomaterials 17, no. 4: 188.
https://doi.org/10.3390/jfb17040188
APA Style
Dinescu, M., Vasilescu, V. G., Ciocan, L. T., Voicu-Balasea, B., Țâncu, A. M. C., Ripszky, A., Miculescu, F., Răuță, S.-A., Cârstea, A.-E., Pantea, M., & Imre, M.
(2026). Evaluation of Post-Processing Time’s Influence on Biocompatibility of 3D-Printed Denture Base Resins. Journal of Functional Biomaterials, 17(4), 188.
https://doi.org/10.3390/jfb17040188
